[M2561] Audio added

[Taranis/sky9x] Code cleaning

src/targets/sky9x/board_sky9x.cpp

@@ -126,7 +126,7 @@ inline void setup_switches()
 }
 
 #ifdef SIMU
-#define end_ppm_capture()
+#define stop_trainer_capture()
 #define rotencEnd()
 #define sam_boot()
 #else
@@ -329,13 +329,13 @@ extern "C" void TC3_IRQHandler() //capture ppm in at 2MHz
   lastCapt = capture;
 }
 
-void start_ppm_capture()
+void init_trainer_capture()
 {
   start_timer4() ;
   start_timer3() ;
 }
 
-void end_ppm_capture()
+void stop_trainer_capture()
 {
   TC1->TC_CHANNEL[0].TC_IDR = TC_IDR0_LDRAS ;
   NVIC_DisableIRQ(TC3_IRQn) ;
@@ -744,7 +744,7 @@ void usbBootloader()
   rotencEnd();
   endPdcUsartReceive() ;          // Terminate any serial reception
   end_bt_tx_interrupt() ;
-  end_ppm_capture() ;
+  stop_trainer_capture() ;
   end_spi() ;
   audioEnd() ;
 

src/targets/stock/board_stock.cpp

@@ -121,7 +121,7 @@ inline void boardInit()
 #endif
 
 #if defined(AUDIO) || defined(VOICE)
-  TCCR2  = (0b010 << CS00); // Norm mode, clk/8
+  SET_TIMER_AUDIO_CTRL();
 #elif defined(PWM_BACKLIGHT)
   /** Smartieparts LED Backlight is connected to PORTB/pin7, which can be used as pwm output of timer2 **/
 #if defined(SP22)

src/targets/stock/board_stock.h

@@ -76,6 +76,10 @@
   #define RESUME_10MS_INTERRUPT()  TIMSK2 |= (1<<OCIE2A)
   #define PAUSE_PPMIN_INTERRUPT()  TIMSK3 &= ~(1<<ICIE3)
   #define RESUME_PPMIN_INTERRUPT() TIMSK3 |= (1<<ICIE3)
+  #define TIMER_AUDIO_VECT         TIMER4_OVF_vect
+  #define SET_TIMER_AUDIO_CTRL()   TCCR4B = (0b111 << CS20)
+  #define PAUSE_AUDIO_INTERRUPT()  TIMSK4 &= ~(1<<OCIE4A)
+  #define RESUME_AUDIO_INTERRUPT() TIMSK4 |= (1<<OCIE4A)
 #else
   #define TIMER_16KHZ_VECT         TIMER0_OVF_vect
   #define COUNTER_16KHZ            TCNT0
@@ -85,6 +89,10 @@
   #define RESUME_10MS_INTERRUPT()  TIMSK |= (1<<OCIE0)
   #define PAUSE_PPMIN_INTERRUPT()  ETIMSK &= ~(1<<TICIE3)
   #define RESUME_PPMIN_INTERRUPT() ETIMSK |= (1<<TICIE3)
+  #define TIMER_AUDIO_VECT         TIMER2_OVF_vect
+  #define SET_TIMER_AUDIO_CTRL()   TCCR2 = (0b010 << CS00) // Norm mode, clk/8
+  #define PAUSE_AUDIO_INTERRUPT()  TIMSK &= ~(1<<TOIE2)
+  #define RESUME_AUDIO_INTERRUPT() TIMSK |= (1<<TOIE2)
 #endif
 
 // Power driver (none)

src/targets/taranis/board_taranis.cpp

@@ -112,14 +112,10 @@ uint8_t usbPlugged(void)
 #if defined(DEBUG)
 void debugPutc(const char c)
 {
-	uartPutc(c);
+  uartPutc(c);
 }
 #endif
 
-void start_ppm_capture()
-{
-}
-
 #if !defined(SIMU)
 extern "C" {
 USB_OTG_CORE_HANDLE USB_OTG_dev;
@@ -202,7 +198,6 @@ void boardInit()
 #if defined(DEBUG)
   uartInit(DEBUG_UART_BAUDRATE);
 #endif
-  init_trainer_capture();  
   init5msTimer();
   __enable_irq();
   eepromInit();

src/targets/taranis/board_taranis.h

@@ -85,7 +85,7 @@ uint8_t usbPlugged(void);
 void delaysInit();
 
 #define DEBUG_UART_BAUDRATE 9600
-#define SPORT_BAUDRATE 57600
+#define SPORT_BAUDRATE      57600
 
 void uartInit(uint32_t baudrate);
 void uartPutc(const char c);