refact: ADC, switches and keys

Add "hardware_defs" target to dump hardware defines from hal.h per target

Fixed hal.h definitions for switches & ADC inputs

Tools to generate hardware definitions from current hal.h

generator: add support for EXTx and analog switches

WiP

Add generated header to hardware_defs target

Add support for ADC input direction and index per GPIO port

Incredible: it compiles

Removed StdPeriph ADC driver

Works on QX7

Works on TX16S (VBat missing)

Switch driver using generated switches for stm32 targets

Switch driver with generated switches for simu

Use switch names from switch driver

Fixed single conversion handling

Fixed horus VBat reading

Added switch name

Fix warnings about bitfield offsets and GCC 4.4

This is caused by bitfields that cross type boundaries. In this particular case, it happens as the bitfield is not defined the same in `rtc_backup.cpp`.

Switches has already been moved to generic driver

Jitter measurement for each sample, not just for oversampled values

Moved periph clock init to the ADC driver

ADC & GPIOs.

Add switchInit() to init pins

Fix NV14 CMake

Fix taranis target

Fix NV14 (again)

Model audio files: use new interface for switch index

Fix X9-lite

Fix simu headers

Fix getSwitchName()

Add support for ADC switches

Fix switch warning YAML

Test only switches which are defined

Conversions tests for QX7 only on QX7

Fix X12S

Fix function switch names

Enable ADC periph clock before initialising channels

NV14: offset inputs for the sticks & fix switches

WiP: get rid of VSRCRAW and some more

Simu shall use normal ADC driver

fix x7

fix nv14

Fix 9x nav

fix 212x64

fix xlite

fix x9e

fix simu lib

fix unit tests

fix x7 tests

PWM stick values should be written directly into adcValues

... just like FlySky sticks.

fix x12s

fix nv14

Add some support for SPI ADC (only unit tests)

Remove `jq` usage

fix generate_yaml.py for newer libclang

fix pot config

fix stick names

Some YAML generator improvements

Max 16 Pots on COLORLCD

Fix some source names

Use 10 bits for switches to prevent overflow

Removed horus constants for switches & ADC inputs

Fix unit tests

Fix curve edit

Fix libsimulator

Fix function switches (tpro)

Refine ADC & analog API

Moved hardware definitions scripts and templates into own dir

cleanup API refine

Fix unit tests

Mixer: apply calibration only on required inputs

Place ADC switches after all other ADC inputs

Fix X12S

Remove useless TR_POTS_VSRCRAW, TR_SW_VSRCRAW, and TR_VSRCRAW

Cleanup redundant generated YAML parsers

Fixes Boxer rebase

Add boxer to generate-hw-defs.sh

Obsolete LUA exports

Add boxer ADC_DIRECTION

Split generate_hw_defs.py into multiple files

Some cleanup (+ LUA switches)

Fix AXIS definitions

Fixed translation strings declarations

Some rebase fixes

Remove some useless StdPeriph drivers

fix: set pin mode to reset state on usart deinit

fix: use canonical names for calibration data

fix: ADC driver does not care about unconfigured inputs

fix X12S ADC

Add support for ADC conversion chaining

Better X12S ADC implem

Moved X12S ADC driver to HAL/LL

Improve ADC driver separation

Fixed taranis & nv14

Moved PWM gimbals to HAL/LL

Removed useless TR_EXTRA_VSRCRAW

Fixed include guards

Small fixes

Renamed control inputs

Moved internal and external module pulse driver def to boards

Move more things to the generic_stm32 board

Remove STR_VMIXTRIMS

Added analog labels

Generate main control names

Misuse labels / short labels for main controls

Backward compatibility: sliders and legacy names

New keys driver

Let's get rid of StdPeriph headers in simu

Add jinja2 to CI workflows

Use `grep` instead of `sed`

chore: add python jinja2 oto msys setup script

Removed more static definitions and use dynamic ones instead

Fixes X9E

Fix x7 nav too

212 switch display

Fix default sliders

Removed NUM_STICKS

212 switch display working nicely

Surface radio 'stick' replacements

fix: switch, trim & rotary pin init

Remove old key drivers

Removed VKEYS

Removed ETX_FOURCC

Fixed SURFACE_NAME

Removed TR_VSWITCHES & TR_TRIMS_SWITCHES

Fix xpot switches

Store calibrated analogs in physical order

Use getSourceString in drawSource

Implement missing YAML read/write

Fix isSourceAvailableInInputs()

Fix isSourceAvailable()

Some surface fixes

Fix CLI debug

Ported colour UI of analog diagnostics to new ADC API

Small fixes

Better input mapping

Minor tpro fixes

Fix trims available

Remove TX mode choice on surface radio

Rename surface controls

Channel order alignement

Fix throttle warning

Fix checkTrims()

Fix pot config casting issue

Fix IS_SWITCH_FS()

Fixed input mapping

Fix fswitch auto-switch

Fixed storing / reading function switches in YAML

Fix enableVBatBridge() / disableVBatBridge()

Fix interesting mode conversion

Fix sources issues

Fix special funnction list

Proper function switch handling

128 GUI improvements

Fix compilation

Boxer cosmetics

128 hardware screen cosmetic

Fix TX12 switches

More switches fixes

Simplify CPU type handling

Fix flash size

Fixed page-up / page-down in libopenui

radio/src/functions.cpp

@@ -20,6 +20,7 @@
  */
 
 #include "opentx.h"
+#include "switches.h"
 
 #if defined(COLORLCD)
 void setRequestedMainView(uint8_t view);
@@ -143,7 +144,7 @@ void evalFunctions(const CustomFunctionData * functions, CustomFunctionsContext
 #endif
 
 #if defined(GVARS)
-  for (uint8_t i=0; i<NUM_TRIMS; i++) {
+  for (uint8_t i=0; i<MAX_TRIMS; i++) {
     trimGvar[i] = -1;
   }
 #endif
@@ -173,9 +174,9 @@ void evalFunctions(const CustomFunctionData * functions, CustomFunctionsContext
             uint8_t param = CFN_CH_INDEX(cfn);
             if (param == 0)
               newActiveFunctions |= 0x0F;
-            else if (param <= NUM_STICKS)
+            else if (param <= MAX_STICKS)
               newActiveFunctions |= (1 << (param - 1));
-            else if (param == NUM_STICKS + 1)
+            else if (param == MAX_STICKS + 1)
               newActiveFunctions |= (1u << FUNCTION_TRAINER_CHANNELS);
             break;
           }
@@ -465,3 +466,76 @@ void evalFunctions(const CustomFunctionData * functions, CustomFunctionsContext
   functionsContext.activeFunctions  = newActiveFunctions;
 }
 
+const char* funcGetLabel(uint8_t func)
+{
+  switch(func) {
+  case FUNC_OVERRIDE_CHANNEL:
+    return STR_SF_SAFETY;
+  case FUNC_TRAINER:
+    return STR_SF_TRAINER;
+  case FUNC_INSTANT_TRIM:
+    return STR_SF_INST_TRIM;
+  case FUNC_RESET:
+    return STR_SF_RESET;
+  case FUNC_SET_TIMER:
+    return STR_SF_SET_TIMER;
+#if defined(GVARS)
+  case FUNC_ADJUST_GVAR:
+    return STR_ADJUST_GVAR;
+#endif
+  case FUNC_VOLUME:
+    return STR_SF_VOLUME;
+  case FUNC_SET_FAILSAFE:
+    return STR_SF_FAILSAFE;
+  case FUNC_RANGECHECK:
+    return STR_SF_RANGE_CHECK;
+  case FUNC_BIND:
+    return STR_SF_MOD_BIND;
+#if defined(AUDIO)
+  case FUNC_PLAY_SOUND:
+    return STR_SOUND;
+#endif
+#if defined(VOICE)
+  case FUNC_PLAY_TRACK:
+    return STR_PLAY_TRACK;
+  case FUNC_PLAY_VALUE:
+    return STR_PLAY_VALUE;
+#endif
+#if defined(LUA)
+  case FUNC_PLAY_SCRIPT:
+    return STR_SF_PLAY_SCRIPT;
+#endif
+  case FUNC_BACKGND_MUSIC:
+    return STR_SF_BG_MUSIC;
+  case FUNC_BACKGND_MUSIC_PAUSE:
+    return STR_SF_BG_MUSIC_PAUSE;
+#if defined(VARIO)
+  case FUNC_VARIO:
+    return STR_SF_VARIO;
+#endif
+#if defined(HAPTIC)
+  case FUNC_HAPTIC:
+    return STR_SF_HAPTIC;
+#endif
+  case FUNC_LOGS:
+    return STR_SF_LOGS;
+  case FUNC_BACKLIGHT:
+    return STR_SF_BACKLIGHT;
+  case FUNC_SCREENSHOT:
+    return STR_SF_SCREENSHOT;
+  case FUNC_RACING_MODE:
+    return STR_SF_RACING_MODE;
+#if defined(COLORLCD)
+  case FUNC_DISABLE_TOUCH:
+    return STR_SF_DISABLE_TOUCH;
+  case FUNC_SET_SCREEN:
+    return STR_SF_SET_SCREEN;
+#endif
+#if defined(DEBUG)
+  case FUNC_TEST:
+    return STR_SF_TEST;
+#endif
+  default:
+    return STR_EMPTY;
+  }
+}