Fix some power-up issues

Resolves #519
This commit is contained in:
Raphael Coeffic
2021-11-01 11:01:32 +01:00
committed by Raphael Coeffic
parent aabfc6f6b1
commit 3247b59f5e
5 changed files with 54 additions and 131 deletions
+1 -1
View File
@@ -134,9 +134,9 @@ set(FIRMWARE_TARGET_SRC
${TOUCH_DRIVER} ${TOUCH_DRIVER}
board.cpp board.cpp
backlight_driver.cpp backlight_driver.cpp
pwr_driver.cpp
sdram_driver.c sdram_driver.c
startup_stm32f42_43xxx.s startup_stm32f42_43xxx.s
../common/arm/stm32/pwr_driver.cpp
../common/arm/stm32/sdio_sd.c ../common/arm/stm32/sdio_sd.c
) )
@@ -143,7 +143,6 @@ void handle_battery_charge(uint32_t last_press_time)
static uint32_t info_until = 0; static uint32_t info_until = 0;
static bool lcdInited = false; static bool lcdInited = false;
if(boardState != BOARD_POWER_OFF) return;
uint32_t now = get_tmr10ms(); uint32_t now = get_tmr10ms();
uint16_t chargeState = get_battery_charge_state(); uint16_t chargeState = get_battery_charge_state();
if(chargeState != CHARGE_UNKNOWN) { if(chargeState != CHARGE_UNKNOWN) {
+51 -32
View File
@@ -139,35 +139,39 @@ void boardInit()
init2MhzTimer(); init2MhzTimer();
init1msTimer(); init1msTimer();
TouchInit(); TouchInit();
usbInit();
uint32_t press_start = 0; uint32_t press_start = 0;
uint32_t press_end = 0; uint32_t press_end = 0;
if (UNEXPECTED_SHUTDOWN()) { if (UNEXPECTED_SHUTDOWN()) {
pwrOn(); pwrOn();
} } else {
while (boardState == BOARD_POWER_OFF) { // prime debounce state...
uint32_t now = get_tmr10ms(); usbPlugged();
if (pwrPressed()) {
press_end = now; while (usbPlugged()) {
if (press_start == 0) press_start = now; uint32_t now = get_tmr10ms();
if ((now - press_start) > POWER_ON_DELAY) { if (pwrPressed()) {
press_end = now;
if (press_start == 0) press_start = now;
if ((now - press_start) > POWER_ON_DELAY) {
pwrOn(); pwrOn();
break; break;
}
} else {
uint32_t press_end_touch = press_end;
if (touchPanelEventOccured()) {
touchPanelRead();
press_end_touch = get_tmr10ms();
}
press_start = 0;
handle_battery_charge(press_end_touch);
delay_ms(20);
press_end = 0;
} }
} }
else {
uint32_t press_end_touch = press_end;
if (touchPanelEventOccured()) {
touchPanelRead();
press_end_touch = get_tmr10ms();
}
press_start = 0;
handle_battery_charge(press_end_touch);
delay_ms(20);
press_end = 0;
}
} }
keysInit(); keysInit();
@@ -179,10 +183,8 @@ void boardInit()
adcInit(&stm32_hal_adc_driver); adcInit(&stm32_hal_adc_driver);
backlightInit(); backlightInit();
lcdInit(); lcdInit();
usbInit();
hapticInit(); hapticInit();
boardState = BOARD_STARTED;
#if defined(RTCLOCK) #if defined(RTCLOCK)
rtcInit(); // RTC must be initialized before rambackupRestore() is called rtcInit(); // RTC must be initialized before rambackupRestore() is called
@@ -190,20 +192,27 @@ void boardInit()
#if defined(DEBUG) #if defined(DEBUG)
DBGMCU_APB1PeriphConfig(DBGMCU_IWDG_STOP|DBGMCU_TIM1_STOP|DBGMCU_TIM2_STOP|DBGMCU_TIM3_STOP|DBGMCU_TIM4_STOP|DBGMCU_TIM5_STOP|DBGMCU_TIM6_STOP|DBGMCU_TIM7_STOP|DBGMCU_TIM8_STOP|DBGMCU_TIM9_STOP|DBGMCU_TIM10_STOP|DBGMCU_TIM11_STOP|DBGMCU_TIM12_STOP|DBGMCU_TIM13_STOP|DBGMCU_TIM14_STOP, ENABLE); DBGMCU_APB1PeriphConfig(
DBGMCU_IWDG_STOP | DBGMCU_TIM1_STOP | DBGMCU_TIM2_STOP |
DBGMCU_TIM3_STOP | DBGMCU_TIM4_STOP | DBGMCU_TIM5_STOP |
DBGMCU_TIM6_STOP | DBGMCU_TIM7_STOP | DBGMCU_TIM8_STOP |
DBGMCU_TIM9_STOP | DBGMCU_TIM10_STOP | DBGMCU_TIM11_STOP |
DBGMCU_TIM12_STOP | DBGMCU_TIM13_STOP | DBGMCU_TIM14_STOP,
ENABLE);
#endif #endif
} }
void boardOff() void boardOff()
{ {
lcd->drawFilledRect(0, 0, LCD_WIDTH, LCD_HEIGHT, SOLID, COLOR_THEME_FOCUS); lcd->drawFilledRect(0, 0, LCD_WIDTH, LCD_HEIGHT, SOLID, COLOR_THEME_FOCUS);
lcdOff(); lcdOff();
SysTick->CTRL = 0; // turn off systick
while (pwrPressed()) { while (pwrPressed()) {
WDG_RESET(); WDG_RESET();
} }
#if defined(RTC_BACKUP_RAM) #if defined(RTC_BACKUP_RAM)
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_BKPSRAM, DISABLE); RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_BKPSRAM, DISABLE);
PWR_BackupRegulatorCmd(DISABLE); PWR_BackupRegulatorCmd(DISABLE);
@@ -211,15 +220,25 @@ void boardOff()
RTC->BKP0R = SHUTDOWN_REQUEST; RTC->BKP0R = SHUTDOWN_REQUEST;
SysTick->CTRL = 0; // turn off systick
pwrOff(); pwrOff();
#if !defined (SIMU)
#if defined(HAPTIC) && !defined(BOOT) // We reach here only in forced power situations, such as hw-debugging with external power
haptic.event(AU_ERROR); // Enter STM32 stop mode / deep-sleep
delay_ms(50); // Code snippet from ST Nucleo PWR_EnterStopMode example
#endif #define PDMode 0x00000000U
while(1) { #if defined(PWR_CR_MRUDS) && defined(PWR_CR_LPUDS) && defined(PWR_CR_FPDS)
NVIC_SystemReset(); MODIFY_REG(PWR->CR, (PWR_CR_PDDS | PWR_CR_LPDS | PWR_CR_FPDS | PWR_CR_LPUDS | PWR_CR_MRUDS), PDMode);
#elif defined(PWR_CR_MRLVDS) && defined(PWR_CR_LPLVDS) && defined(PWR_CR_FPDS)
MODIFY_REG(PWR->CR, (PWR_CR_PDDS | PWR_CR_LPDS | PWR_CR_FPDS | PWR_CR_LPLVDS | PWR_CR_MRLVDS), PDMode);
#else
MODIFY_REG(PWR->CR, (PWR_CR_PDDS| PWR_CR_LPDS), PDMode);
#endif /* PWR_CR_MRUDS && PWR_CR_LPUDS && PWR_CR_FPDS */
/* Set SLEEPDEEP bit of Cortex System Control Register */
SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
// To avoid HardFault at return address, end in an endless loop
while (1) {
} }
#endif
} }
-1
View File
@@ -352,7 +352,6 @@ enum EnumPowerupState
BOARD_REBOOT = 0xC00010FF, BOARD_REBOOT = 0xC00010FF,
}; };
extern uint32_t boardState;
#if defined(__cplusplus) #if defined(__cplusplus)
enum PowerReason { enum PowerReason {
-94
View File
@@ -1,94 +0,0 @@
/*
* Copyright (C) EdgeTX
*
* Based on code named
* opentx - https://github.com/opentx/opentx
* th9x - http://code.google.com/p/th9x
* er9x - http://code.google.com/p/er9x
* gruvin9x - http://code.google.com/p/gruvin9x
*
* License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include "pwr.h"
#include "board.h"
uint32_t boardState __NOINIT;
void pwrInit()
{
GPIO_InitTypeDef GPIO_InitStructure;
GPIO_InitStructure.GPIO_Pin = PWR_ON_GPIO_PIN;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP;
GPIO_Init(PWR_ON_GPIO, &GPIO_InitStructure);
// TODO move this elsewhere!
// Init Module PWR
//GPIO_ResetBits(INTMODULE_PWR_ON_GPIO, INTMODULE_PWR_ON_GPIO_PIN);
//GPIO_InitStructure.GPIO_Pin = INTMODULE_PWR_ON_GPIO_PIN;
//GPIO_Init(INTMODULE_PWR_ON_GPIO, &GPIO_InitStructure);
//Bluetooth
GPIO_SetBits(BLUETOOTH_ON_GPIO, BLUETOOTH_ON_GPIO_PIN);
GPIO_InitStructure.GPIO_Pin = BLUETOOTH_ON_GPIO_PIN;
GPIO_Init(BLUETOOTH_ON_GPIO, &GPIO_InitStructure);
// Init PWR SWITCH PIN
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN;
GPIO_InitStructure.GPIO_Pin = PWR_SWITCH_GPIO_PIN;
GPIO_Init(PWR_ON_GPIO, &GPIO_InitStructure);
// Init SD-DETECT PIN
GPIO_ResetBits(SD_PRESENT_GPIO, SD_PRESENT_GPIO_PIN);
GPIO_InitStructure.GPIO_Pin = SD_PRESENT_GPIO_PIN;
GPIO_Init(SD_PRESENT_GPIO, &GPIO_InitStructure);
//turn power off
GPIO_ResetBits(PWR_ON_GPIO, PWR_ON_GPIO_PIN);
//turn Bluetooth off
GPIO_ResetBits(PWR_ON_GPIO, BLUETOOTH_ON_GPIO_PIN);
boardState = BOARD_POWER_OFF;
}
void pwrOn()
{
GPIO_SetBits(PWR_ON_GPIO, PWR_ON_GPIO_PIN);
boardState = BOARD_POWER_ON;
}
void pwrSoftReboot(){
boardState = BOARD_REBOOT;
NVIC_SystemReset();
}
void pwrOff()
{
// Shutdown the Haptic
hapticDone();
boardState = BOARD_POWER_OFF;
GPIO_ResetBits(PWR_ON_GPIO, PWR_ON_GPIO_PIN);
}
bool pwrPressed()
{
return GPIO_ReadInputDataBit(PWR_ON_GPIO, PWR_SWITCH_GPIO_PIN) == Bit_RESET;
}
void pwrResetHandler()
{
if (boardState != BOARD_POWER_OFF) {
RCC->CSR |= RCC_CSR_RMVF; //clear all flags
}
}