diff --git a/radio/src/CMakeLists.txt b/radio/src/CMakeLists.txt
index 9ca87407e..dece00c0b 100644
--- a/radio/src/CMakeLists.txt
+++ b/radio/src/CMakeLists.txt
@@ -106,6 +106,7 @@ if(PCB STREQUAL HORUS)
pwr_driver.cpp
sdram_driver.c
led_driver.cpp
+ startup_stm32f40_41xxx.s
)
set(STM32LIB_SRC
STM32F4xx_StdPeriph_Driver/src/stm32f4xx_sdio.c
@@ -134,7 +135,12 @@ elseif(PCB STREQUAL TARANIS)
set(FLAVOUR taranis-x9e)
add_definitions(-DSTM32F40_41xxx -DREVPLUS -DREV9E)
add_definitions(-DEEPROM_VARIANT=32768)
- set(FIRMWARE_TARGET_SRC ${FIRMWARE_TARGET_SRC} top_lcd_driver.cpp bluetooth_driver.cpp)
+ set(FIRMWARE_TARGET_SRC
+ ${FIRMWARE_TARGET_SRC}
+ top_lcd_driver.cpp
+ bluetooth_driver.cpp
+ startup_stm32f40_41xxx.s
+ )
if(STICKS STREQUAL HORUS)
add_definitions(-DHORUS_STICKS)
endif()
@@ -337,7 +343,6 @@ if(CPU_TYPE STREQUAL STM32F4)
add_definitions(-DSTM32F4)
set(STM32LIB_SRC
${STM32LIB_SRC}
- CMSIS/Device/ST/STM32F4xx/Source/Templates/gcc_ride7/startup_stm32f40_41xxx.s
STM32F4xx_StdPeriph_Driver/src/misc.c
STM32F4xx_StdPeriph_Driver/src/stm32f4xx_gpio.c
STM32F4xx_StdPeriph_Driver/src/stm32f4xx_dbgmcu.c
diff --git a/radio/src/targets/horus/startup_stm32f40_41xxx.s b/radio/src/targets/horus/startup_stm32f40_41xxx.s
new file mode 100644
index 000000000..4fb8604f7
--- /dev/null
+++ b/radio/src/targets/horus/startup_stm32f40_41xxx.s
@@ -0,0 +1,527 @@
+/**
+ ******************************************************************************
+ * @file startup_stm32f40_41xxx.s
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 08-November-2013
+ * @brief STM32F40xxx/41xxx Devices vector table for RIDE7 toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address
+ * - Configure the clock system and the external SRAM mounted on
+ * STM324xG-EVAL board to be used as data memory (optional,
+ * to be enabled by user)
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M4 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT 2013 STMicroelectronics
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m3
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+/* stack used for SystemInit_ExtMemCtl; always internal RAM used */
+
+/**
+ * @brief This is the code that gets called when the processor first
+ * starts execution following a reset event. Only the absolutely
+ * necessary set is performed, after which the application
+ * supplied main() routine is called.
+ * @param None
+ * @retval : None
+*/
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+ movs r1, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r3, =_sidata
+ ldr r3, [r3, r1]
+ str r3, [r0, r1]
+ adds r1, r1, #4
+
+LoopCopyDataInit:
+ ldr r0, =_sdata
+ ldr r3, =_edata
+ adds r2, r0, r1
+ cmp r2, r3
+ bcc CopyDataInit
+ ldr r2, =_sbss
+ b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+ movs r3, #0
+ str r3, [r2], #4
+
+LoopFillZerobss:
+ ldr r3, = _ebss
+ cmp r2, r3
+ bcc FillZerobss
+
+/*Paint Main Stack */
+ ldr r2, = _main_stack_start
+PaintMainStack:
+ movs r3, #0x55555555
+ str r3, [r2], #4
+LoopPaintMainStack:
+ ldr r3, = _estack
+ cmp r2, r3
+ bcc PaintMainStack
+
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call C++ constructors for static objects */
+ bl __libc_init_array
+/* Call the application's entry point.*/
+ bl main
+ bx lr
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ * @param None
+ * @retval None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+*******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word MemManage_Handler
+ .word BusFault_Handler
+ .word UsageFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word DebugMon_Handler
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+
+ /* External Interrupts */
+ .word WWDG_IRQHandler /* Window WatchDog */
+ .word PVD_IRQHandler /* PVD through EXTI Line detection */
+ .word TAMP_STAMP_IRQHandler /* Tamper and TimeStamps through the EXTI line */
+ .word RTC_WKUP_IRQHandler /* RTC Wakeup through the EXTI line */
+ .word FLASH_IRQHandler /* FLASH */
+ .word RCC_IRQHandler /* RCC */
+ .word EXTI0_IRQHandler /* EXTI Line0 */
+ .word EXTI1_IRQHandler /* EXTI Line1 */
+ .word EXTI2_IRQHandler /* EXTI Line2 */
+ .word EXTI3_IRQHandler /* EXTI Line3 */
+ .word EXTI4_IRQHandler /* EXTI Line4 */
+ .word DMA1_Stream0_IRQHandler /* DMA1 Stream 0 */
+ .word DMA1_Stream1_IRQHandler /* DMA1 Stream 1 */
+ .word DMA1_Stream2_IRQHandler /* DMA1 Stream 2 */
+ .word DMA1_Stream3_IRQHandler /* DMA1 Stream 3 */
+ .word DMA1_Stream4_IRQHandler /* DMA1 Stream 4 */
+ .word DMA1_Stream5_IRQHandler /* DMA1 Stream 5 */
+ .word DMA1_Stream6_IRQHandler /* DMA1 Stream 6 */
+ .word ADC_IRQHandler /* ADC1, ADC2 and ADC3s */
+ .word CAN1_TX_IRQHandler /* CAN1 TX */
+ .word CAN1_RX0_IRQHandler /* CAN1 RX0 */
+ .word CAN1_RX1_IRQHandler /* CAN1 RX1 */
+ .word CAN1_SCE_IRQHandler /* CAN1 SCE */
+ .word EXTI9_5_IRQHandler /* External Line[9:5]s */
+ .word TIM1_BRK_TIM9_IRQHandler /* TIM1 Break and TIM9 */
+ .word TIM1_UP_TIM10_IRQHandler /* TIM1 Update and TIM10 */
+ .word TIM1_TRG_COM_TIM11_IRQHandler /* TIM1 Trigger and Commutation and TIM11 */
+ .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
+ .word TIM2_IRQHandler /* TIM2 */
+ .word TIM3_IRQHandler /* TIM3 */
+ .word TIM4_IRQHandler /* TIM4 */
+ .word I2C1_EV_IRQHandler /* I2C1 Event */
+ .word I2C1_ER_IRQHandler /* I2C1 Error */
+ .word I2C2_EV_IRQHandler /* I2C2 Event */
+ .word I2C2_ER_IRQHandler /* I2C2 Error */
+ .word SPI1_IRQHandler /* SPI1 */
+ .word SPI2_IRQHandler /* SPI2 */
+ .word USART1_IRQHandler /* USART1 */
+ .word USART2_IRQHandler /* USART2 */
+ .word USART3_IRQHandler /* USART3 */
+ .word EXTI15_10_IRQHandler /* External Line[15:10]s */
+ .word RTC_Alarm_IRQHandler /* RTC Alarm (A and B) through EXTI Line */
+ .word OTG_FS_WKUP_IRQHandler /* USB OTG FS Wakeup through EXTI line */
+ .word TIM8_BRK_TIM12_IRQHandler /* TIM8 Break and TIM12 */
+ .word TIM8_UP_TIM13_IRQHandler /* TIM8 Update and TIM13 */
+ .word TIM8_TRG_COM_TIM14_IRQHandler /* TIM8 Trigger and Commutation and TIM14 */
+ .word TIM8_CC_IRQHandler /* TIM8 Capture Compare */
+ .word DMA1_Stream7_IRQHandler /* DMA1 Stream7 */
+ .word FSMC_IRQHandler /* FSMC */
+ .word SDIO_IRQHandler /* SDIO */
+ .word TIM5_IRQHandler /* TIM5 */
+ .word SPI3_IRQHandler /* SPI3 */
+ .word UART4_IRQHandler /* UART4 */
+ .word UART5_IRQHandler /* UART5 */
+ .word TIM6_DAC_IRQHandler /* TIM6 and DAC1&2 underrun errors */
+ .word TIM7_IRQHandler /* TIM7 */
+ .word DMA2_Stream0_IRQHandler /* DMA2 Stream 0 */
+ .word DMA2_Stream1_IRQHandler /* DMA2 Stream 1 */
+ .word DMA2_Stream2_IRQHandler /* DMA2 Stream 2 */
+ .word DMA2_Stream3_IRQHandler /* DMA2 Stream 3 */
+ .word DMA2_Stream4_IRQHandler /* DMA2 Stream 4 */
+ .word ETH_IRQHandler /* Ethernet */
+ .word ETH_WKUP_IRQHandler /* Ethernet Wakeup through EXTI line */
+ .word CAN2_TX_IRQHandler /* CAN2 TX */
+ .word CAN2_RX0_IRQHandler /* CAN2 RX0 */
+ .word CAN2_RX1_IRQHandler /* CAN2 RX1 */
+ .word CAN2_SCE_IRQHandler /* CAN2 SCE */
+ .word OTG_FS_IRQHandler /* USB OTG FS */
+ .word DMA2_Stream5_IRQHandler /* DMA2 Stream 5 */
+ .word DMA2_Stream6_IRQHandler /* DMA2 Stream 6 */
+ .word DMA2_Stream7_IRQHandler /* DMA2 Stream 7 */
+ .word USART6_IRQHandler /* USART6 */
+ .word I2C3_EV_IRQHandler /* I2C3 event */
+ .word I2C3_ER_IRQHandler /* I2C3 error */
+ .word OTG_HS_EP1_OUT_IRQHandler /* USB OTG HS End Point 1 Out */
+ .word OTG_HS_EP1_IN_IRQHandler /* USB OTG HS End Point 1 In */
+ .word OTG_HS_WKUP_IRQHandler /* USB OTG HS Wakeup through EXTI */
+ .word OTG_HS_IRQHandler /* USB OTG HS */
+ .word DCMI_IRQHandler /* DCMI */
+ .word CRYP_IRQHandler /* CRYP crypto */
+ .word HASH_RNG_IRQHandler /* Hash and Rng */
+ .word FPU_IRQHandler /* FPU */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak MemManage_Handler
+ .thumb_set MemManage_Handler,Default_Handler
+
+ .weak BusFault_Handler
+ .thumb_set BusFault_Handler,Default_Handler
+
+ .weak UsageFault_Handler
+ .thumb_set UsageFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak DebugMon_Handler
+ .thumb_set DebugMon_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak PVD_IRQHandler
+ .thumb_set PVD_IRQHandler,Default_Handler
+
+ .weak TAMP_STAMP_IRQHandler
+ .thumb_set TAMP_STAMP_IRQHandler,Default_Handler
+
+ .weak RTC_WKUP_IRQHandler
+ .thumb_set RTC_WKUP_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_IRQHandler
+ .thumb_set RCC_IRQHandler,Default_Handler
+
+ .weak EXTI0_IRQHandler
+ .thumb_set EXTI0_IRQHandler,Default_Handler
+
+ .weak EXTI1_IRQHandler
+ .thumb_set EXTI1_IRQHandler,Default_Handler
+
+ .weak EXTI2_IRQHandler
+ .thumb_set EXTI2_IRQHandler,Default_Handler
+
+ .weak EXTI3_IRQHandler
+ .thumb_set EXTI3_IRQHandler,Default_Handler
+
+ .weak EXTI4_IRQHandler
+ .thumb_set EXTI4_IRQHandler,Default_Handler
+
+ .weak DMA1_Stream0_IRQHandler
+ .thumb_set DMA1_Stream0_IRQHandler,Default_Handler
+
+ .weak DMA1_Stream1_IRQHandler
+ .thumb_set DMA1_Stream1_IRQHandler,Default_Handler
+
+ .weak DMA1_Stream2_IRQHandler
+ .thumb_set DMA1_Stream2_IRQHandler,Default_Handler
+
+ .weak DMA1_Stream3_IRQHandler
+ .thumb_set DMA1_Stream3_IRQHandler,Default_Handler
+
+ .weak DMA1_Stream4_IRQHandler
+ .thumb_set DMA1_Stream4_IRQHandler,Default_Handler
+
+ .weak DMA1_Stream5_IRQHandler
+ .thumb_set DMA1_Stream5_IRQHandler,Default_Handler
+
+ .weak DMA1_Stream6_IRQHandler
+ .thumb_set DMA1_Stream6_IRQHandler,Default_Handler
+
+ .weak ADC_IRQHandler
+ .thumb_set ADC_IRQHandler,Default_Handler
+
+ .weak CAN1_TX_IRQHandler
+ .thumb_set CAN1_TX_IRQHandler,Default_Handler
+
+ .weak CAN1_RX0_IRQHandler
+ .thumb_set CAN1_RX0_IRQHandler,Default_Handler
+
+ .weak CAN1_RX1_IRQHandler
+ .thumb_set CAN1_RX1_IRQHandler,Default_Handler
+
+ .weak CAN1_SCE_IRQHandler
+ .thumb_set CAN1_SCE_IRQHandler,Default_Handler
+
+ .weak EXTI9_5_IRQHandler
+ .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_TIM9_IRQHandler
+ .thumb_set TIM1_BRK_TIM9_IRQHandler,Default_Handler
+
+ .weak TIM1_UP_TIM10_IRQHandler
+ .thumb_set TIM1_UP_TIM10_IRQHandler,Default_Handler
+
+ .weak TIM1_TRG_COM_TIM11_IRQHandler
+ .thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM2_IRQHandler
+ .thumb_set TIM2_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak TIM4_IRQHandler
+ .thumb_set TIM4_IRQHandler,Default_Handler
+
+ .weak I2C1_EV_IRQHandler
+ .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+ .weak I2C1_ER_IRQHandler
+ .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+ .weak I2C2_EV_IRQHandler
+ .thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+ .weak I2C2_ER_IRQHandler
+ .thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak SPI2_IRQHandler
+ .thumb_set SPI2_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+ .weak USART2_IRQHandler
+ .thumb_set USART2_IRQHandler,Default_Handler
+
+ .weak USART3_IRQHandler
+ .thumb_set USART3_IRQHandler,Default_Handler
+
+ .weak EXTI15_10_IRQHandler
+ .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+ .weak RTC_Alarm_IRQHandler
+ .thumb_set RTC_Alarm_IRQHandler,Default_Handler
+
+ .weak OTG_FS_WKUP_IRQHandler
+ .thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler
+
+ .weak TIM8_BRK_TIM12_IRQHandler
+ .thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler
+
+ .weak TIM8_UP_TIM13_IRQHandler
+ .thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler
+
+ .weak TIM8_TRG_COM_TIM14_IRQHandler
+ .thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler
+
+ .weak TIM8_CC_IRQHandler
+ .thumb_set TIM8_CC_IRQHandler,Default_Handler
+
+ .weak DMA1_Stream7_IRQHandler
+ .thumb_set DMA1_Stream7_IRQHandler,Default_Handler
+
+ .weak FSMC_IRQHandler
+ .thumb_set FSMC_IRQHandler,Default_Handler
+
+ .weak SDIO_IRQHandler
+ .thumb_set SDIO_IRQHandler,Default_Handler
+
+ .weak TIM5_IRQHandler
+ .thumb_set TIM5_IRQHandler,Default_Handler
+
+ .weak SPI3_IRQHandler
+ .thumb_set SPI3_IRQHandler,Default_Handler
+
+ .weak UART4_IRQHandler
+ .thumb_set UART4_IRQHandler,Default_Handler
+
+ .weak UART5_IRQHandler
+ .thumb_set UART5_IRQHandler,Default_Handler
+
+ .weak TIM6_DAC_IRQHandler
+ .thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+ .weak TIM7_IRQHandler
+ .thumb_set TIM7_IRQHandler,Default_Handler
+
+ .weak DMA2_Stream0_IRQHandler
+ .thumb_set DMA2_Stream0_IRQHandler,Default_Handler
+
+ .weak DMA2_Stream1_IRQHandler
+ .thumb_set DMA2_Stream1_IRQHandler,Default_Handler
+
+ .weak DMA2_Stream2_IRQHandler
+ .thumb_set DMA2_Stream2_IRQHandler,Default_Handler
+
+ .weak DMA2_Stream3_IRQHandler
+ .thumb_set DMA2_Stream3_IRQHandler,Default_Handler
+
+ .weak DMA2_Stream4_IRQHandler
+ .thumb_set DMA2_Stream4_IRQHandler,Default_Handler
+
+ .weak ETH_IRQHandler
+ .thumb_set ETH_IRQHandler,Default_Handler
+
+ .weak ETH_WKUP_IRQHandler
+ .thumb_set ETH_WKUP_IRQHandler,Default_Handler
+
+ .weak CAN2_TX_IRQHandler
+ .thumb_set CAN2_TX_IRQHandler,Default_Handler
+
+ .weak CAN2_RX0_IRQHandler
+ .thumb_set CAN2_RX0_IRQHandler,Default_Handler
+
+ .weak CAN2_RX1_IRQHandler
+ .thumb_set CAN2_RX1_IRQHandler,Default_Handler
+
+ .weak CAN2_SCE_IRQHandler
+ .thumb_set CAN2_SCE_IRQHandler,Default_Handler
+
+ .weak OTG_FS_IRQHandler
+ .thumb_set OTG_FS_IRQHandler,Default_Handler
+
+ .weak DMA2_Stream5_IRQHandler
+ .thumb_set DMA2_Stream5_IRQHandler,Default_Handler
+
+ .weak DMA2_Stream6_IRQHandler
+ .thumb_set DMA2_Stream6_IRQHandler,Default_Handler
+
+ .weak DMA2_Stream7_IRQHandler
+ .thumb_set DMA2_Stream7_IRQHandler,Default_Handler
+
+ .weak USART6_IRQHandler
+ .thumb_set USART6_IRQHandler,Default_Handler
+
+ .weak I2C3_EV_IRQHandler
+ .thumb_set I2C3_EV_IRQHandler,Default_Handler
+
+ .weak I2C3_ER_IRQHandler
+ .thumb_set I2C3_ER_IRQHandler,Default_Handler
+
+ .weak OTG_HS_EP1_OUT_IRQHandler
+ .thumb_set OTG_HS_EP1_OUT_IRQHandler,Default_Handler
+
+ .weak OTG_HS_EP1_IN_IRQHandler
+ .thumb_set OTG_HS_EP1_IN_IRQHandler,Default_Handler
+
+ .weak OTG_HS_WKUP_IRQHandler
+ .thumb_set OTG_HS_WKUP_IRQHandler,Default_Handler
+
+ .weak OTG_HS_IRQHandler
+ .thumb_set OTG_HS_IRQHandler,Default_Handler
+
+ .weak DCMI_IRQHandler
+ .thumb_set DCMI_IRQHandler,Default_Handler
+
+ .weak CRYP_IRQHandler
+ .thumb_set CRYP_IRQHandler,Default_Handler
+
+ .weak HASH_RNG_IRQHandler
+ .thumb_set HASH_RNG_IRQHandler,Default_Handler
+
+ .weak FPU_IRQHandler
+ .thumb_set FPU_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/radio/src/targets/taranis/startup_stm32f40_41xxx.s b/radio/src/targets/taranis/startup_stm32f40_41xxx.s
new file mode 100644
index 000000000..4fb8604f7
--- /dev/null
+++ b/radio/src/targets/taranis/startup_stm32f40_41xxx.s
@@ -0,0 +1,527 @@
+/**
+ ******************************************************************************
+ * @file startup_stm32f40_41xxx.s
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 08-November-2013
+ * @brief STM32F40xxx/41xxx Devices vector table for RIDE7 toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address
+ * - Configure the clock system and the external SRAM mounted on
+ * STM324xG-EVAL board to be used as data memory (optional,
+ * to be enabled by user)
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M4 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT 2013 STMicroelectronics
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m3
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+/* stack used for SystemInit_ExtMemCtl; always internal RAM used */
+
+/**
+ * @brief This is the code that gets called when the processor first
+ * starts execution following a reset event. Only the absolutely
+ * necessary set is performed, after which the application
+ * supplied main() routine is called.
+ * @param None
+ * @retval : None
+*/
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+ movs r1, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r3, =_sidata
+ ldr r3, [r3, r1]
+ str r3, [r0, r1]
+ adds r1, r1, #4
+
+LoopCopyDataInit:
+ ldr r0, =_sdata
+ ldr r3, =_edata
+ adds r2, r0, r1
+ cmp r2, r3
+ bcc CopyDataInit
+ ldr r2, =_sbss
+ b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+ movs r3, #0
+ str r3, [r2], #4
+
+LoopFillZerobss:
+ ldr r3, = _ebss
+ cmp r2, r3
+ bcc FillZerobss
+
+/*Paint Main Stack */
+ ldr r2, = _main_stack_start
+PaintMainStack:
+ movs r3, #0x55555555
+ str r3, [r2], #4
+LoopPaintMainStack:
+ ldr r3, = _estack
+ cmp r2, r3
+ bcc PaintMainStack
+
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call C++ constructors for static objects */
+ bl __libc_init_array
+/* Call the application's entry point.*/
+ bl main
+ bx lr
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ * @param None
+ * @retval None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+*******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word MemManage_Handler
+ .word BusFault_Handler
+ .word UsageFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word DebugMon_Handler
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+
+ /* External Interrupts */
+ .word WWDG_IRQHandler /* Window WatchDog */
+ .word PVD_IRQHandler /* PVD through EXTI Line detection */
+ .word TAMP_STAMP_IRQHandler /* Tamper and TimeStamps through the EXTI line */
+ .word RTC_WKUP_IRQHandler /* RTC Wakeup through the EXTI line */
+ .word FLASH_IRQHandler /* FLASH */
+ .word RCC_IRQHandler /* RCC */
+ .word EXTI0_IRQHandler /* EXTI Line0 */
+ .word EXTI1_IRQHandler /* EXTI Line1 */
+ .word EXTI2_IRQHandler /* EXTI Line2 */
+ .word EXTI3_IRQHandler /* EXTI Line3 */
+ .word EXTI4_IRQHandler /* EXTI Line4 */
+ .word DMA1_Stream0_IRQHandler /* DMA1 Stream 0 */
+ .word DMA1_Stream1_IRQHandler /* DMA1 Stream 1 */
+ .word DMA1_Stream2_IRQHandler /* DMA1 Stream 2 */
+ .word DMA1_Stream3_IRQHandler /* DMA1 Stream 3 */
+ .word DMA1_Stream4_IRQHandler /* DMA1 Stream 4 */
+ .word DMA1_Stream5_IRQHandler /* DMA1 Stream 5 */
+ .word DMA1_Stream6_IRQHandler /* DMA1 Stream 6 */
+ .word ADC_IRQHandler /* ADC1, ADC2 and ADC3s */
+ .word CAN1_TX_IRQHandler /* CAN1 TX */
+ .word CAN1_RX0_IRQHandler /* CAN1 RX0 */
+ .word CAN1_RX1_IRQHandler /* CAN1 RX1 */
+ .word CAN1_SCE_IRQHandler /* CAN1 SCE */
+ .word EXTI9_5_IRQHandler /* External Line[9:5]s */
+ .word TIM1_BRK_TIM9_IRQHandler /* TIM1 Break and TIM9 */
+ .word TIM1_UP_TIM10_IRQHandler /* TIM1 Update and TIM10 */
+ .word TIM1_TRG_COM_TIM11_IRQHandler /* TIM1 Trigger and Commutation and TIM11 */
+ .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
+ .word TIM2_IRQHandler /* TIM2 */
+ .word TIM3_IRQHandler /* TIM3 */
+ .word TIM4_IRQHandler /* TIM4 */
+ .word I2C1_EV_IRQHandler /* I2C1 Event */
+ .word I2C1_ER_IRQHandler /* I2C1 Error */
+ .word I2C2_EV_IRQHandler /* I2C2 Event */
+ .word I2C2_ER_IRQHandler /* I2C2 Error */
+ .word SPI1_IRQHandler /* SPI1 */
+ .word SPI2_IRQHandler /* SPI2 */
+ .word USART1_IRQHandler /* USART1 */
+ .word USART2_IRQHandler /* USART2 */
+ .word USART3_IRQHandler /* USART3 */
+ .word EXTI15_10_IRQHandler /* External Line[15:10]s */
+ .word RTC_Alarm_IRQHandler /* RTC Alarm (A and B) through EXTI Line */
+ .word OTG_FS_WKUP_IRQHandler /* USB OTG FS Wakeup through EXTI line */
+ .word TIM8_BRK_TIM12_IRQHandler /* TIM8 Break and TIM12 */
+ .word TIM8_UP_TIM13_IRQHandler /* TIM8 Update and TIM13 */
+ .word TIM8_TRG_COM_TIM14_IRQHandler /* TIM8 Trigger and Commutation and TIM14 */
+ .word TIM8_CC_IRQHandler /* TIM8 Capture Compare */
+ .word DMA1_Stream7_IRQHandler /* DMA1 Stream7 */
+ .word FSMC_IRQHandler /* FSMC */
+ .word SDIO_IRQHandler /* SDIO */
+ .word TIM5_IRQHandler /* TIM5 */
+ .word SPI3_IRQHandler /* SPI3 */
+ .word UART4_IRQHandler /* UART4 */
+ .word UART5_IRQHandler /* UART5 */
+ .word TIM6_DAC_IRQHandler /* TIM6 and DAC1&2 underrun errors */
+ .word TIM7_IRQHandler /* TIM7 */
+ .word DMA2_Stream0_IRQHandler /* DMA2 Stream 0 */
+ .word DMA2_Stream1_IRQHandler /* DMA2 Stream 1 */
+ .word DMA2_Stream2_IRQHandler /* DMA2 Stream 2 */
+ .word DMA2_Stream3_IRQHandler /* DMA2 Stream 3 */
+ .word DMA2_Stream4_IRQHandler /* DMA2 Stream 4 */
+ .word ETH_IRQHandler /* Ethernet */
+ .word ETH_WKUP_IRQHandler /* Ethernet Wakeup through EXTI line */
+ .word CAN2_TX_IRQHandler /* CAN2 TX */
+ .word CAN2_RX0_IRQHandler /* CAN2 RX0 */
+ .word CAN2_RX1_IRQHandler /* CAN2 RX1 */
+ .word CAN2_SCE_IRQHandler /* CAN2 SCE */
+ .word OTG_FS_IRQHandler /* USB OTG FS */
+ .word DMA2_Stream5_IRQHandler /* DMA2 Stream 5 */
+ .word DMA2_Stream6_IRQHandler /* DMA2 Stream 6 */
+ .word DMA2_Stream7_IRQHandler /* DMA2 Stream 7 */
+ .word USART6_IRQHandler /* USART6 */
+ .word I2C3_EV_IRQHandler /* I2C3 event */
+ .word I2C3_ER_IRQHandler /* I2C3 error */
+ .word OTG_HS_EP1_OUT_IRQHandler /* USB OTG HS End Point 1 Out */
+ .word OTG_HS_EP1_IN_IRQHandler /* USB OTG HS End Point 1 In */
+ .word OTG_HS_WKUP_IRQHandler /* USB OTG HS Wakeup through EXTI */
+ .word OTG_HS_IRQHandler /* USB OTG HS */
+ .word DCMI_IRQHandler /* DCMI */
+ .word CRYP_IRQHandler /* CRYP crypto */
+ .word HASH_RNG_IRQHandler /* Hash and Rng */
+ .word FPU_IRQHandler /* FPU */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak MemManage_Handler
+ .thumb_set MemManage_Handler,Default_Handler
+
+ .weak BusFault_Handler
+ .thumb_set BusFault_Handler,Default_Handler
+
+ .weak UsageFault_Handler
+ .thumb_set UsageFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak DebugMon_Handler
+ .thumb_set DebugMon_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak PVD_IRQHandler
+ .thumb_set PVD_IRQHandler,Default_Handler
+
+ .weak TAMP_STAMP_IRQHandler
+ .thumb_set TAMP_STAMP_IRQHandler,Default_Handler
+
+ .weak RTC_WKUP_IRQHandler
+ .thumb_set RTC_WKUP_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_IRQHandler
+ .thumb_set RCC_IRQHandler,Default_Handler
+
+ .weak EXTI0_IRQHandler
+ .thumb_set EXTI0_IRQHandler,Default_Handler
+
+ .weak EXTI1_IRQHandler
+ .thumb_set EXTI1_IRQHandler,Default_Handler
+
+ .weak EXTI2_IRQHandler
+ .thumb_set EXTI2_IRQHandler,Default_Handler
+
+ .weak EXTI3_IRQHandler
+ .thumb_set EXTI3_IRQHandler,Default_Handler
+
+ .weak EXTI4_IRQHandler
+ .thumb_set EXTI4_IRQHandler,Default_Handler
+
+ .weak DMA1_Stream0_IRQHandler
+ .thumb_set DMA1_Stream0_IRQHandler,Default_Handler
+
+ .weak DMA1_Stream1_IRQHandler
+ .thumb_set DMA1_Stream1_IRQHandler,Default_Handler
+
+ .weak DMA1_Stream2_IRQHandler
+ .thumb_set DMA1_Stream2_IRQHandler,Default_Handler
+
+ .weak DMA1_Stream3_IRQHandler
+ .thumb_set DMA1_Stream3_IRQHandler,Default_Handler
+
+ .weak DMA1_Stream4_IRQHandler
+ .thumb_set DMA1_Stream4_IRQHandler,Default_Handler
+
+ .weak DMA1_Stream5_IRQHandler
+ .thumb_set DMA1_Stream5_IRQHandler,Default_Handler
+
+ .weak DMA1_Stream6_IRQHandler
+ .thumb_set DMA1_Stream6_IRQHandler,Default_Handler
+
+ .weak ADC_IRQHandler
+ .thumb_set ADC_IRQHandler,Default_Handler
+
+ .weak CAN1_TX_IRQHandler
+ .thumb_set CAN1_TX_IRQHandler,Default_Handler
+
+ .weak CAN1_RX0_IRQHandler
+ .thumb_set CAN1_RX0_IRQHandler,Default_Handler
+
+ .weak CAN1_RX1_IRQHandler
+ .thumb_set CAN1_RX1_IRQHandler,Default_Handler
+
+ .weak CAN1_SCE_IRQHandler
+ .thumb_set CAN1_SCE_IRQHandler,Default_Handler
+
+ .weak EXTI9_5_IRQHandler
+ .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_TIM9_IRQHandler
+ .thumb_set TIM1_BRK_TIM9_IRQHandler,Default_Handler
+
+ .weak TIM1_UP_TIM10_IRQHandler
+ .thumb_set TIM1_UP_TIM10_IRQHandler,Default_Handler
+
+ .weak TIM1_TRG_COM_TIM11_IRQHandler
+ .thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM2_IRQHandler
+ .thumb_set TIM2_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak TIM4_IRQHandler
+ .thumb_set TIM4_IRQHandler,Default_Handler
+
+ .weak I2C1_EV_IRQHandler
+ .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+ .weak I2C1_ER_IRQHandler
+ .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+ .weak I2C2_EV_IRQHandler
+ .thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+ .weak I2C2_ER_IRQHandler
+ .thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak SPI2_IRQHandler
+ .thumb_set SPI2_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+ .weak USART2_IRQHandler
+ .thumb_set USART2_IRQHandler,Default_Handler
+
+ .weak USART3_IRQHandler
+ .thumb_set USART3_IRQHandler,Default_Handler
+
+ .weak EXTI15_10_IRQHandler
+ .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+ .weak RTC_Alarm_IRQHandler
+ .thumb_set RTC_Alarm_IRQHandler,Default_Handler
+
+ .weak OTG_FS_WKUP_IRQHandler
+ .thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler
+
+ .weak TIM8_BRK_TIM12_IRQHandler
+ .thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler
+
+ .weak TIM8_UP_TIM13_IRQHandler
+ .thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler
+
+ .weak TIM8_TRG_COM_TIM14_IRQHandler
+ .thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler
+
+ .weak TIM8_CC_IRQHandler
+ .thumb_set TIM8_CC_IRQHandler,Default_Handler
+
+ .weak DMA1_Stream7_IRQHandler
+ .thumb_set DMA1_Stream7_IRQHandler,Default_Handler
+
+ .weak FSMC_IRQHandler
+ .thumb_set FSMC_IRQHandler,Default_Handler
+
+ .weak SDIO_IRQHandler
+ .thumb_set SDIO_IRQHandler,Default_Handler
+
+ .weak TIM5_IRQHandler
+ .thumb_set TIM5_IRQHandler,Default_Handler
+
+ .weak SPI3_IRQHandler
+ .thumb_set SPI3_IRQHandler,Default_Handler
+
+ .weak UART4_IRQHandler
+ .thumb_set UART4_IRQHandler,Default_Handler
+
+ .weak UART5_IRQHandler
+ .thumb_set UART5_IRQHandler,Default_Handler
+
+ .weak TIM6_DAC_IRQHandler
+ .thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+ .weak TIM7_IRQHandler
+ .thumb_set TIM7_IRQHandler,Default_Handler
+
+ .weak DMA2_Stream0_IRQHandler
+ .thumb_set DMA2_Stream0_IRQHandler,Default_Handler
+
+ .weak DMA2_Stream1_IRQHandler
+ .thumb_set DMA2_Stream1_IRQHandler,Default_Handler
+
+ .weak DMA2_Stream2_IRQHandler
+ .thumb_set DMA2_Stream2_IRQHandler,Default_Handler
+
+ .weak DMA2_Stream3_IRQHandler
+ .thumb_set DMA2_Stream3_IRQHandler,Default_Handler
+
+ .weak DMA2_Stream4_IRQHandler
+ .thumb_set DMA2_Stream4_IRQHandler,Default_Handler
+
+ .weak ETH_IRQHandler
+ .thumb_set ETH_IRQHandler,Default_Handler
+
+ .weak ETH_WKUP_IRQHandler
+ .thumb_set ETH_WKUP_IRQHandler,Default_Handler
+
+ .weak CAN2_TX_IRQHandler
+ .thumb_set CAN2_TX_IRQHandler,Default_Handler
+
+ .weak CAN2_RX0_IRQHandler
+ .thumb_set CAN2_RX0_IRQHandler,Default_Handler
+
+ .weak CAN2_RX1_IRQHandler
+ .thumb_set CAN2_RX1_IRQHandler,Default_Handler
+
+ .weak CAN2_SCE_IRQHandler
+ .thumb_set CAN2_SCE_IRQHandler,Default_Handler
+
+ .weak OTG_FS_IRQHandler
+ .thumb_set OTG_FS_IRQHandler,Default_Handler
+
+ .weak DMA2_Stream5_IRQHandler
+ .thumb_set DMA2_Stream5_IRQHandler,Default_Handler
+
+ .weak DMA2_Stream6_IRQHandler
+ .thumb_set DMA2_Stream6_IRQHandler,Default_Handler
+
+ .weak DMA2_Stream7_IRQHandler
+ .thumb_set DMA2_Stream7_IRQHandler,Default_Handler
+
+ .weak USART6_IRQHandler
+ .thumb_set USART6_IRQHandler,Default_Handler
+
+ .weak I2C3_EV_IRQHandler
+ .thumb_set I2C3_EV_IRQHandler,Default_Handler
+
+ .weak I2C3_ER_IRQHandler
+ .thumb_set I2C3_ER_IRQHandler,Default_Handler
+
+ .weak OTG_HS_EP1_OUT_IRQHandler
+ .thumb_set OTG_HS_EP1_OUT_IRQHandler,Default_Handler
+
+ .weak OTG_HS_EP1_IN_IRQHandler
+ .thumb_set OTG_HS_EP1_IN_IRQHandler,Default_Handler
+
+ .weak OTG_HS_WKUP_IRQHandler
+ .thumb_set OTG_HS_WKUP_IRQHandler,Default_Handler
+
+ .weak OTG_HS_IRQHandler
+ .thumb_set OTG_HS_IRQHandler,Default_Handler
+
+ .weak DCMI_IRQHandler
+ .thumb_set DCMI_IRQHandler,Default_Handler
+
+ .weak CRYP_IRQHandler
+ .thumb_set CRYP_IRQHandler,Default_Handler
+
+ .weak HASH_RNG_IRQHandler
+ .thumb_set HASH_RNG_IRQHandler,Default_Handler
+
+ .weak FPU_IRQHandler
+ .thumb_set FPU_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/