chore: New module/serial API (#3055)
* WiP: new module interface * WiP: softserial timer DMA * WiP: setup() and send() in one step and remove methods specific to internal or external module * fixes and extra port config * horus targets * module ports have moved * T8 support (only internal module) * fix nv14 * stupid GCC.... * disable BT * remove nv14 telem driver * remove old aux serial driver * Move module buffers out of pulses.h * Soft serial fixes and PXX1 support * Fixed PPM module output * Fixed CLI * compilation fixes * Ported bluetooth and flysky gimbal to new serial driver * Re-enable soft-serial RX * fixes and cleanup * nv14 fixes * Fix flysky gimbals * Ghost module * 16 bytes of RAM * Remove getByte from module API * Ghost cleanup * fix: _half_duplex_input() must be called after usart init * WiP * more cleanup * Remove board specific settings from PXX1 / PXX2 drivers * A bit of PXX2 header cleanup * Add support for OVER8 and ONEBIT * Add some support for inverters (NV14 / EL18) * Support NV14 power fixes in generic board * Fix polarity handling * Fix RX DMA * Fix mixer not running * Add soft-serial polarity control * Quick fix for telemetry polling while module port is changed * Fix bootloader DEBUG * Fix MPM telemetry * Fix pulse start * DSM2 soft-serial fallback * DSMP async module restart * Fix CRSF LUA upstream * Remove global variable telemetryProtocol * Use HAL/LL constants * Fix various issue with AFHDS3 and NV14/EL18 internal module * Fixed S.PORT unit tests * fix: update widx after writing at current index * fix: init error condition * Fix: possible infinite loop in _find_port() * Add support for bidir S.PORT init * Add support for "getLastByte" in HW serial driver * PXX1: Add support for S.PORT based on IDLE callback * Fix rebase error * Fix softserial _rx_fifo_push() * Add softserial support for waitForTxCompleted() * Fix MPM flashing (internal / external) * Fixed external MPM * Activate RX DMA on internal module Seems to work with serial passthrough without issues, at least on the L3R PRO. * Fix softserial DMA on stdlcd F4 targets * Add softserial support for 32bit timers (mostly TIM2) * More precise soft-serial * Fix MPM update using inverters & HW uart * Raise S.PORT DMA/USART IRQ prio to achieve faster switching to input * Remove useless delays * Fix flashing external ELRS module * Added a retry mechanism for FrSky S.PORT update * Remove useless enableRx() * External FrSky modules are all flashed via S.PORT * Remove power management unit update This was only used on the first batch of X-lite.
This commit is contained in:
@@ -27,23 +27,21 @@ enum ChannelsProtocols {
|
||||
PROTOCOL_CHANNELS_UNINITIALIZED,
|
||||
PROTOCOL_CHANNELS_NONE,
|
||||
PROTOCOL_CHANNELS_PPM,
|
||||
PROTOCOL_CHANNELS_PXX1_PULSES,
|
||||
PROTOCOL_CHANNELS_PXX1_SERIAL,
|
||||
PROTOCOL_CHANNELS_PXX1,
|
||||
PROTOCOL_CHANNELS_DSM2_LP45,
|
||||
PROTOCOL_CHANNELS_DSM2_DSM2,
|
||||
PROTOCOL_CHANNELS_DSM2_DSMX,
|
||||
PROTOCOL_CHANNELS_CROSSFIRE,
|
||||
PROTOCOL_CHANNELS_MULTIMODULE,
|
||||
PROTOCOL_CHANNELS_SBUS,
|
||||
PROTOCOL_CHANNELS_PXX2_LOWSPEED,
|
||||
PROTOCOL_CHANNELS_PXX2_HIGHSPEED,
|
||||
PROTOCOL_CHANNELS_PXX2,
|
||||
PROTOCOL_CHANNELS_AFHDS2A,
|
||||
PROTOCOL_CHANNELS_AFHDS3,
|
||||
PROTOCOL_CHANNELS_GHOST,
|
||||
PROTOCOL_CHANNELS_DSMP
|
||||
};
|
||||
|
||||
struct etx_module_driver_t {
|
||||
struct etx_proto_driver_t {
|
||||
|
||||
// Protocol implemented by this module driver
|
||||
ChannelsProtocols protocol;
|
||||
@@ -51,20 +49,11 @@ struct etx_module_driver_t {
|
||||
// Init module communication
|
||||
void* (*init)(uint8_t module);
|
||||
|
||||
// // Default pulse period in microseconds
|
||||
// uint16_t (*get_default_period)(uint8_t module);
|
||||
|
||||
// De-Init module communication
|
||||
void (*deinit)(void* context);
|
||||
void (*deinit)(void* ctx);
|
||||
|
||||
// Prepare the pulses to be sent
|
||||
void (*setupPulses)(void* context, int16_t* channels, uint8_t nChannels);
|
||||
|
||||
// Send the pulses
|
||||
void (*sendPulses)(void* context);
|
||||
|
||||
// Fetch telemetry byte
|
||||
int (*getByte)(void* context, uint8_t* data);
|
||||
// Send the next pulse frame
|
||||
void (*sendPulses)(void* ctx, uint8_t* buffer, int16_t* channels, uint8_t nChannels);
|
||||
|
||||
// Process input data byte (telemetry)
|
||||
void (*processData)(void* context, uint8_t data, uint8_t* buffer, uint8_t* len);
|
||||
|
||||
Reference in New Issue
Block a user