chore: New module/serial API (#3055)

* WiP: new module interface

* WiP: softserial timer DMA

* WiP: setup() and send() in one step

and remove methods specific to internal or external module

* fixes and extra port config

* horus targets

* module ports have moved

* T8 support (only internal module)

* fix nv14

* stupid GCC....

* disable BT

* remove nv14 telem driver

* remove old aux serial driver

* Move module buffers out of pulses.h

* Soft serial fixes and PXX1 support

* Fixed PPM module output

* Fixed CLI

* compilation fixes

* Ported bluetooth and flysky gimbal to new serial driver

* Re-enable soft-serial RX

* fixes and cleanup

* nv14 fixes

* Fix flysky gimbals

* Ghost module

* 16 bytes of RAM

* Remove getByte from module API

* Ghost cleanup

* fix: _half_duplex_input() must be called after usart init

* WiP

* more cleanup

* Remove board specific settings from PXX1 / PXX2 drivers

* A bit of PXX2 header cleanup

* Add support for OVER8 and ONEBIT

* Add some support for inverters (NV14 / EL18)

* Support NV14 power fixes in generic board

* Fix polarity handling

* Fix RX DMA

* Fix mixer not running

* Add soft-serial polarity control

* Quick fix for telemetry polling while module port is changed

* Fix bootloader DEBUG

* Fix MPM telemetry

* Fix pulse start

* DSM2 soft-serial fallback

* DSMP async module restart

* Fix CRSF LUA upstream

* Remove global variable telemetryProtocol

* Use HAL/LL constants

* Fix various issue with AFHDS3 and NV14/EL18 internal module

* Fixed S.PORT unit tests

* fix: update widx after writing at current index

* fix: init error condition

* Fix: possible infinite loop in _find_port()

* Add support for bidir S.PORT init

* Add support for "getLastByte" in HW serial driver

* PXX1: Add support for S.PORT based on IDLE callback

* Fix rebase error

* Fix softserial _rx_fifo_push()

* Add softserial support for waitForTxCompleted()

* Fix MPM flashing (internal / external)

* Fixed external MPM

* Activate RX DMA on internal module

Seems to work with serial passthrough without issues, at least on the L3R PRO.

* Fix softserial DMA on stdlcd F4 targets

* Add softserial support for 32bit timers (mostly TIM2)

* More precise soft-serial

* Fix MPM update using inverters & HW uart

* Raise S.PORT DMA/USART IRQ prio to achieve faster switching to input

* Remove useless delays

* Fix flashing external ELRS module

* Added a retry mechanism for FrSky S.PORT update

* Remove useless enableRx()

* External FrSky modules are all flashed via S.PORT

* Remove power management unit update

This was only used on the first batch of X-lite.
This commit is contained in:
Raphael Coeffic
2023-02-09 19:44:32 +10:00
committed by GitHub
parent d80adc6c4d
commit 72193eda82
189 changed files with 7960 additions and 8364 deletions
+158
View File
@@ -0,0 +1,158 @@
/*
* Copyright (C) EdgeTx
*
* Based on code named
* opentx - https://github.com/opentx/opentx
* th9x - http://code.google.com/p/th9x
* er9x - http://code.google.com/p/er9x
* gruvin9x - http://code.google.com/p/gruvin9x
*
* License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#pragma once
#include <stdint.h>
#include "serial_driver.h"
#include "timer_driver.h"
#include "definitions.h"
//
// Module ports
//
// flags
#define ETX_MOD_DIR_TX (1 << 0)
#define ETX_MOD_DIR_RX (1 << 1)
#define ETX_MOD_DIR_TX_RX (ETX_MOD_DIR_TX | ETX_MOD_DIR_RX)
#define ETX_MOD_FULL_DUPLEX (1 << 2)
#define ETX_MOD_TYPE_NONE 0
#define ETX_MOD_TYPE_TIMER (1 << 0)
#define ETX_MOD_TYPE_SERIAL (1 << 1)
enum ModulePort : uint8_t {
ETX_MOD_PORT_UART,
ETX_MOD_PORT_TIMER,
ETX_MOD_PORT_SOFT_INV,
ETX_MOD_PORT_SPORT,
ETX_MOD_PORT_SPORT_INV,
ETX_MOD_PORT_MAX
};
//
// A module port is a pin (single UART RX or TX; PPM pin)
// or pin pair (UART RX/TX)
//
typedef struct {
// enum ModulePort
uint8_t port;
// ETX_MOD_TYPE_xx
uint8_t type;
// flags bitfield ETX_MOD_DIR_xx
uint8_t dir_flags;
union {
const etx_timer_driver_t *timer;
const etx_serial_driver_t *serial;
} drv;
// this is specific to the driver above
void* hw_def;
// inverter support: only works on the following ports
// - ETX_MOD_PORT_UART / ETX_MOD_PORT_SPORT
void (*set_inverted)(uint8_t enable);
} etx_module_port_t;
typedef struct {
const etx_module_port_t* const ports;
void (*set_pwr)(uint8_t on);
void (*set_bootcmd)(uint8_t on);
const uint8_t n_ports;
} etx_module_t;
#define BEGIN_MODULES() \
extern const etx_module_t* const _modules[]; \
const etx_module_t* const _modules[] = {
#define END_MODULES() }; \
extern const uint8_t _n_modules; \
const uint8_t _n_modules = DIM(_modules);
typedef struct {
const etx_module_port_t* port;
void* ctx;
} etx_module_driver_t;
typedef struct {
etx_module_driver_t tx;
etx_module_driver_t rx;
void* user_data;
} etx_module_state_t;
// Init the internal module port data
void modulePortInit();
#if defined(CONFIGURABLE_MODULE_PORT)
// Configure an extra port
void modulePortConfigExtra(const etx_module_port_t* port);
#endif
const etx_module_t* modulePortGetModuleDescription(uint8_t module);
const etx_module_port_t* modulePortFind(uint8_t module, uint8_t type,
uint8_t port, uint8_t polarity);
void modulePortSetPower(uint8_t module, uint8_t enabled);
bool modulePortPowered(uint8_t module);
// Init module port with params (driver & context stored locally)
etx_module_state_t* modulePortInitSerial(uint8_t module, uint8_t port,
const etx_serial_init* params);
// Init module port with params (driver & context stored locally)
etx_module_state_t* modulePortInitTimer(uint8_t module, uint8_t port,
const etx_timer_config_t* cfg);
// De-init port and clear data
void modulePortDeInit(etx_module_state_t* st);
// Once initialized, retrieve module serial driver and context
etx_module_state_t* modulePortGetState(uint8_t module);
uint8_t modulePortGetModule(etx_module_state_t* st);
inline uint8_t modulePortGetType(const etx_module_driver_t& d) {
return d.port->type;
}
inline const etx_serial_driver_t* modulePortGetSerialDrv(const etx_module_driver_t& d) {
return d.port->drv.serial;
}
inline const etx_timer_driver_t* modulePortGetTimerDrv(const etx_module_driver_t& d) {
return d.port->drv.timer;
}
inline void* modulePortGetCtx(const etx_module_driver_t& d) {
return d.ctx;
}