chore: New module/serial API (#3055)

* WiP: new module interface

* WiP: softserial timer DMA

* WiP: setup() and send() in one step

and remove methods specific to internal or external module

* fixes and extra port config

* horus targets

* module ports have moved

* T8 support (only internal module)

* fix nv14

* stupid GCC....

* disable BT

* remove nv14 telem driver

* remove old aux serial driver

* Move module buffers out of pulses.h

* Soft serial fixes and PXX1 support

* Fixed PPM module output

* Fixed CLI

* compilation fixes

* Ported bluetooth and flysky gimbal to new serial driver

* Re-enable soft-serial RX

* fixes and cleanup

* nv14 fixes

* Fix flysky gimbals

* Ghost module

* 16 bytes of RAM

* Remove getByte from module API

* Ghost cleanup

* fix: _half_duplex_input() must be called after usart init

* WiP

* more cleanup

* Remove board specific settings from PXX1 / PXX2 drivers

* A bit of PXX2 header cleanup

* Add support for OVER8 and ONEBIT

* Add some support for inverters (NV14 / EL18)

* Support NV14 power fixes in generic board

* Fix polarity handling

* Fix RX DMA

* Fix mixer not running

* Add soft-serial polarity control

* Quick fix for telemetry polling while module port is changed

* Fix bootloader DEBUG

* Fix MPM telemetry

* Fix pulse start

* DSM2 soft-serial fallback

* DSMP async module restart

* Fix CRSF LUA upstream

* Remove global variable telemetryProtocol

* Use HAL/LL constants

* Fix various issue with AFHDS3 and NV14/EL18 internal module

* Fixed S.PORT unit tests

* fix: update widx after writing at current index

* fix: init error condition

* Fix: possible infinite loop in _find_port()

* Add support for bidir S.PORT init

* Add support for "getLastByte" in HW serial driver

* PXX1: Add support for S.PORT based on IDLE callback

* Fix rebase error

* Fix softserial _rx_fifo_push()

* Add softserial support for waitForTxCompleted()

* Fix MPM flashing (internal / external)

* Fixed external MPM

* Activate RX DMA on internal module

Seems to work with serial passthrough without issues, at least on the L3R PRO.

* Fix softserial DMA on stdlcd F4 targets

* Add softserial support for 32bit timers (mostly TIM2)

* More precise soft-serial

* Fix MPM update using inverters & HW uart

* Raise S.PORT DMA/USART IRQ prio to achieve faster switching to input

* Remove useless delays

* Fix flashing external ELRS module

* Added a retry mechanism for FrSky S.PORT update

* Remove useless enableRx()

* External FrSky modules are all flashed via S.PORT

* Remove power management unit update

This was only used on the first batch of X-lite.
This commit is contained in:
Raphael Coeffic
2023-02-09 19:44:32 +10:00
committed by GitHub
parent d80adc6c4d
commit 72193eda82
189 changed files with 7960 additions and 8364 deletions
+78 -14
View File
@@ -21,16 +21,84 @@
#include "opentx.h"
#if defined(PXX2)
#if defined(LIBOPENUI)
#include "libopenui.h"
#endif
#if defined(INTMODULE_USART)
#include "intmodule_serial_driver.h"
#endif
#include "pulses/pxx2.h"
#include "pulses/pxx2_transport.h"
static_assert(PXX2_FRAME_MAXLENGTH <= INTMODULE_FIFO_SIZE, "");
static const char * const PXX2ModulesNames[] = {
"---",
"XJT",
"ISRM",
"ISRM-PRO",
"ISRM-S",
"R9M",
"R9MLite",
"R9MLite-PRO",
"ISRM-N",
"ISRM-S-X9",
"ISRM-S-X10E",
"XJT Lite",
"ISRM-S-X10S",
"ISRM-X9LiteS"
};
const char * getPXX2ModuleName(uint8_t modelId)
{
if (modelId < DIM(PXX2ModulesNames))
return PXX2ModulesNames[modelId];
else
return PXX2ModulesNames[0];
}
static const char * const PXX2ReceiversNames[] = {
"---",
"X8R",
"RX8R",
"RX8R-PRO",
"RX6R",
"RX4R",
"G-RX8",
"G-RX6",
"X6R",
"X4R",
"X4R-SB",
"XSR",
"XSR-M",
"RXSR",
"S6R",
"S8R",
"XM",
"XM+",
"XMR",
"R9",
"R9-SLIM",
"R9-SLIM+",
"R9-MINI",
"R9-MM",
"R9-STAB", // R9-STAB has OTA
"R9-MINI-OTA", // this one has OTA (different bootloader)
"R9-MM-OTA", // this one has OTA (different bootloader)
"R9-SLIM+-OTA", // this one has OTA (different bootloader)
"Archer-X", // this one has OTA (internal module)
"R9MX", // this one has OTA
"R9SX", // this one has OTA
};
const char * getPXX2ReceiverName(uint8_t modelId)
{
if (modelId < DIM(PXX2ReceiversNames))
return PXX2ReceiversNames[modelId];
else
return PXX2ReceiversNames[0];
}
static void processGetHardwareInfoFrame(uint8_t module, const uint8_t * frame)
{
if (moduleState[module].mode != MODULE_MODE_GET_HARDWARE_INFO) {
@@ -216,14 +284,8 @@ static void processResetFrame(uint8_t module, const uint8_t * frame)
static void processTelemetryFrame(uint8_t module, const uint8_t * frame)
{
for (uint8_t i = 0; i < 1 + frame[0]; i++) {
telemetryMirrorSend(frame[i]);
}
uint8_t origin = (module << 2) + (frame[3] & 0x03);
if (origin != TELEMETRY_ENDPOINT_SPORT) {
sportProcessTelemetryPacketWithoutCrc(origin, &frame[4]);
}
uint8_t origin = frame[3] & 0x03;
sportProcessTelemetryPacketWithoutCrc(module, origin, &frame[4]);
}
#if defined(INTERNAL_MODULE_PXX2) && defined(ACCESS_DENIED) && !defined(SIMU)
@@ -254,9 +316,10 @@ static void processAuthenticationFrame(uint8_t module, const uint8_t * frame,
moduleState[module].mode = MODULE_MODE_AUTHENTICATION;
Pxx2Pulses &pxx2 = intmodulePulsesData.pxx2;
pxx2.setupAuthenticationFrame(module, cryptoType, (const uint8_t *)messageDigest);
drv->sendBuffer(ctx, pxx2.getData(), pxx2.getSize());
uint8_t* module_buffer = pulsesGetModuleBuffer(module);
Pxx2Pulses pxx2(module_buffer);
pxx2.setupAuthenticationFrame(module, cryptoType, (const uint8_t *)messageDigest);
drv->sendBuffer(ctx, module_buffer, pxx2.getSize());
// we remain in AUTHENTICATION mode to avoid a CHANNELS frame is sent at the
// end of the mixing process
@@ -417,3 +480,4 @@ void processPXX2Frame(uint8_t module, const uint8_t * frame,
}
}
#endif