chore: New module/serial API (#3055)

* WiP: new module interface

* WiP: softserial timer DMA

* WiP: setup() and send() in one step

and remove methods specific to internal or external module

* fixes and extra port config

* horus targets

* module ports have moved

* T8 support (only internal module)

* fix nv14

* stupid GCC....

* disable BT

* remove nv14 telem driver

* remove old aux serial driver

* Move module buffers out of pulses.h

* Soft serial fixes and PXX1 support

* Fixed PPM module output

* Fixed CLI

* compilation fixes

* Ported bluetooth and flysky gimbal to new serial driver

* Re-enable soft-serial RX

* fixes and cleanup

* nv14 fixes

* Fix flysky gimbals

* Ghost module

* 16 bytes of RAM

* Remove getByte from module API

* Ghost cleanup

* fix: _half_duplex_input() must be called after usart init

* WiP

* more cleanup

* Remove board specific settings from PXX1 / PXX2 drivers

* A bit of PXX2 header cleanup

* Add support for OVER8 and ONEBIT

* Add some support for inverters (NV14 / EL18)

* Support NV14 power fixes in generic board

* Fix polarity handling

* Fix RX DMA

* Fix mixer not running

* Add soft-serial polarity control

* Quick fix for telemetry polling while module port is changed

* Fix bootloader DEBUG

* Fix MPM telemetry

* Fix pulse start

* DSM2 soft-serial fallback

* DSMP async module restart

* Fix CRSF LUA upstream

* Remove global variable telemetryProtocol

* Use HAL/LL constants

* Fix various issue with AFHDS3 and NV14/EL18 internal module

* Fixed S.PORT unit tests

* fix: update widx after writing at current index

* fix: init error condition

* Fix: possible infinite loop in _find_port()

* Add support for bidir S.PORT init

* Add support for "getLastByte" in HW serial driver

* PXX1: Add support for S.PORT based on IDLE callback

* Fix rebase error

* Fix softserial _rx_fifo_push()

* Add softserial support for waitForTxCompleted()

* Fix MPM flashing (internal / external)

* Fixed external MPM

* Activate RX DMA on internal module

Seems to work with serial passthrough without issues, at least on the L3R PRO.

* Fix softserial DMA on stdlcd F4 targets

* Add softserial support for 32bit timers (mostly TIM2)

* More precise soft-serial

* Fix MPM update using inverters & HW uart

* Raise S.PORT DMA/USART IRQ prio to achieve faster switching to input

* Remove useless delays

* Fix flashing external ELRS module

* Added a retry mechanism for FrSky S.PORT update

* Remove useless enableRx()

* External FrSky modules are all flashed via S.PORT

* Remove power management unit update

This was only used on the first batch of X-lite.
This commit is contained in:
Raphael Coeffic
2023-02-09 19:44:32 +10:00
committed by GitHub
parent d80adc6c4d
commit 72193eda82
189 changed files with 7960 additions and 8364 deletions
+10 -31
View File
@@ -76,9 +76,6 @@ void telemetryMirrorSend(uint8_t data);
void telemetryWakeup();
void telemetryReset();
extern uint8_t telemetryProtocol;
void telemetryInit(uint8_t protocol);
void telemetryInterrupt10ms();
void telemetryStart();
@@ -129,31 +126,9 @@ void frskyDSetDefault(int index, uint16_t id);
#define IS_DISTANCE_UNIT(unit) ((unit) == UNIT_METERS || (unit) == UNIT_FEET)
#define IS_SPEED_UNIT(unit) ((unit) >= UNIT_KTS && (unit) <= UNIT_MPH)
extern uint8_t telemetryProtocol;
inline const char* getRssiLabel()
{
#if defined(MULTIMODULE)
if (telemetryProtocol == PROTOCOL_TELEMETRY_MULTIMODULE &&
(g_model.moduleData[EXTERNAL_MODULE].multi.rfProtocol ==
MODULE_SUBTYPE_MULTI_FS_AFHDS2A ||
g_model.moduleData[EXTERNAL_MODULE].multi.rfProtocol ==
MODULE_SUBTYPE_MULTI_HOTT)) {
return "RQly";
}
#endif
#if defined(GHOST)
if (telemetryProtocol == PROTOCOL_TELEMETRY_GHOST) {
return "RQly";
}
#endif
#if defined (PCBNV14)
extern uint32_t NV14internalModuleFwVersion;
if ( (telemetryProtocol == PROTOCOL_TELEMETRY_FLYSKY_NV14)
&& (NV14internalModuleFwVersion >= 0x1000E) )
return "Sgnl";
#endif
return "RSSI";
return "Rx-Stats";
}
// TODO: this should handle only the external S.PORT line
@@ -161,6 +136,7 @@ inline const char* getRssiLabel()
//
inline uint8_t modelTelemetryProtocol()
{
#if defined(HARDWARE_EXTERNAL_MODULE)
bool sportUsed = isSportLineUsedByInternalModule();
#if defined(CROSSFIRE)
@@ -175,6 +151,7 @@ inline uint8_t modelTelemetryProtocol()
}
#endif
// TODO: PPM driver should support setting up a telemetry parser callback
if (!sportUsed && isModulePPM(EXTERNAL_MODULE)) {
return g_model.telemetryProtocol;
}
@@ -191,17 +168,19 @@ inline uint8_t modelTelemetryProtocol()
}
#endif
if (isModuleDSMP(EXTERNAL_MODULE)) {
return PROTOCOL_TELEMETRY_DSMP;
}
#endif // HARDWARE_EXTERNAL_MODULE
// TODO: Check if that is really necessary...
#if defined(AFHDS2)
#if defined(AFHDS2) && defined(HARDWARE_INTERNAL_MODULE)
if (isModuleAFHDS2A(INTERNAL_MODULE)) {
return PROTOCOL_TELEMETRY_FLYSKY_NV14;
}
#endif
if (isModuleDSMP(EXTERNAL_MODULE)) {
return PROTOCOL_TELEMETRY_DSMP;
}
// default choice
return PROTOCOL_TELEMETRY_FRSKY_SPORT;
}