Make PCB args are now SKY9X and GRUVIN9X instead of ARM and V4
[sky9x] Temperature calibration [sky9x] RTC modifications
This commit is contained in:
@@ -0,0 +1,229 @@
|
||||
/* ----------------------------------------------------------------------------
|
||||
* ATMEL Microcontroller Software Support
|
||||
* ----------------------------------------------------------------------------
|
||||
* Copyright (c) 2008, Atmel Corporation
|
||||
*
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
*
|
||||
* - Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the disclaimer below.
|
||||
*
|
||||
* Atmel's name may not be used to endorse or promote products derived from
|
||||
* this software without specific prior written permission.
|
||||
*
|
||||
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
|
||||
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
* ----------------------------------------------------------------------------
|
||||
*/
|
||||
|
||||
/**
|
||||
* \file
|
||||
*
|
||||
* \par Purpose
|
||||
*
|
||||
* Provides the low-level initialization function that gets called on chip startup.
|
||||
*/
|
||||
|
||||
/*----------------------------------------------------------------------------
|
||||
* Headers
|
||||
*----------------------------------------------------------------------------*/
|
||||
|
||||
#include "board.h"
|
||||
|
||||
/*----------------------------------------------------------------------------
|
||||
* Local definitions
|
||||
*----------------------------------------------------------------------------*/
|
||||
/** Define clock timeout */
|
||||
#define CLOCK_TIMEOUT 5000
|
||||
/** Bit 29 must always be set to 1 when programming the CKGR_PLLAR register.*/
|
||||
#define PMC_PLLA_SET_BIT29 (0x1 << 29)
|
||||
/** Specifies the number of Slow Clock cycles x8 before the LOCKA bit is set in PMC_SR after CKGR_PLLAR is written.*/
|
||||
#define PMC_PLLA_COUNT (0xBF << 8)
|
||||
/** The PLLA Clock frequency is the PLLA input frequency multiplied by 8*/
|
||||
#define PMC_PLLA_MULTIPIER (0x07 << 16)
|
||||
/** PLLA Divider is bypassed.*/
|
||||
#define PMC_PLLA_DIV (0x01)
|
||||
|
||||
void revert_osc( void ) ;
|
||||
|
||||
|
||||
/*----------------------------------------------------------------------------
|
||||
* Local functions
|
||||
* returns master_frequency
|
||||
*----------------------------------------------------------------------------*/
|
||||
|
||||
// *** WARNING, this is called BEFORE .data and .bss have been initialised
|
||||
// *** GLOBAL variables are NOT useable
|
||||
|
||||
static uint32_t BOARD_ConfigurePmc(void)
|
||||
{
|
||||
/* TODO: configurate PLL in new way */
|
||||
//#if 0
|
||||
// uint32_t timeout = 0;
|
||||
// /** 1: Checking the Main Oscillator Frequency (Optional) and Initialize main oscillator */
|
||||
// /** 1.1 Initialize main oscillator */
|
||||
// // TODO:
|
||||
|
||||
// /** 2. Setting PLL and Divider*/
|
||||
// /** 2.1 Initialize PLLA*/
|
||||
// PMC->CKGR_PLLAR = ( PMC_PLLA_SET_BIT29 |
|
||||
// PMC_PLLA_MULTIPIER |
|
||||
// PMC_PLLA_COUNT |
|
||||
// PMC_PLLA_DIV
|
||||
// );
|
||||
// timeout = 0;
|
||||
// /** 2.2 Wait for the LOCKA bit to be set by polling the status register.*/
|
||||
// while (!(PMC->PMC_SR & PMC_SR_LOCKA) && (timeout++ < CLOCK_TIMEOUT));
|
||||
// /** 2.3 wait for the MCKRDY bit to be set by polling the status register*/
|
||||
// timeout = 0;
|
||||
// while (!(PMC->PMC_SR & PMC_SR_MCKRDY) && (timeout++ < CLOCK_TIMEOUT));
|
||||
|
||||
// /** 3. Selection of Master Clock and Processor Clock*/
|
||||
// PMC->PMC_MCKR |= PMC_MCKR_PRES_CLK_2;
|
||||
|
||||
// /** 3.1 wait for the MCKRDY bit to be set by polling the status register*/
|
||||
// timeout = 0;
|
||||
// while (!(PMC->PMC_SR & PMC_SR_MCKRDY) && (timeout++ < CLOCK_TIMEOUT));
|
||||
|
||||
// /** 3.2 PLLA Clock is selected */
|
||||
// PMC->PMC_MCKR = PMC_MCKR_PRES_CLK_2 | PMC_MCKR_CSS_PLLA_CLK;
|
||||
|
||||
// /** 3.3 wait for the MCKRDY bit to be set by polling the status register*/
|
||||
// timeout = 0;
|
||||
// while (!(PMC->PMC_SR & PMC_SR_MCKRDY) && (timeout++ < CLOCK_TIMEOUT));
|
||||
//#endif
|
||||
|
||||
#if 1 // old as sam3u
|
||||
#define AT91C_CKGR_MUL_SHIFT 16
|
||||
//#define AT91C_CKGR_OUT_SHIFT 14
|
||||
#define AT91C_CKGR_PLLCOUNT_SHIFT 8
|
||||
#define AT91C_CKGR_DIV_SHIFT 0
|
||||
|
||||
// Settings at 72MHz/2 = 36MHz
|
||||
#define BOARD_OSCOUNT (CKGR_MOR_MOSCXTST & (0x8 << 8))
|
||||
#define BOARD_PLLR ((1 << 29) | (0x5 << AT91C_CKGR_MUL_SHIFT) \
|
||||
| (0x1 << AT91C_CKGR_PLLCOUNT_SHIFT) | (0x2 << AT91C_CKGR_DIV_SHIFT))
|
||||
#define BOARD_MCKR (PMC_MCKR_CSS_PLLA_CLK)
|
||||
|
||||
// Define clock timeout
|
||||
#undef CLOCK_TIMEOUT
|
||||
#define CLOCK_TIMEOUT 0xFFFFFFFF
|
||||
|
||||
register uint32_t timeout = 0 ;
|
||||
register Pmc *pmcptr ;
|
||||
|
||||
pmcptr = PMC ;
|
||||
|
||||
/* Enable NRST reset
|
||||
************************************/
|
||||
//AT91C_BASE_RSTC->RSTC_RMR |= AT91C_RSTC_URSTEN;
|
||||
|
||||
/* Select external slow clock
|
||||
****************************/
|
||||
|
||||
|
||||
// if ((SUPC->SUPC_SR & SUPC_SR_OSCSEL) != SUPC_SR_OSCSEL_CRYST) {
|
||||
// SUPC->SUPC_CR = SUPC_CR_XTALSEL_CRYSTAL_SEL | ((uint32_t)0xA5 << 24);
|
||||
// timeout = 0;
|
||||
// while (!(SUPC->SUPC_SR & SUPC_SR_OSCSEL_CRYST) );
|
||||
// }
|
||||
|
||||
|
||||
/* Initialize main oscillator
|
||||
****************************/
|
||||
if(!(pmcptr->CKGR_MOR & CKGR_MOR_MOSCSEL))
|
||||
{
|
||||
|
||||
pmcptr->CKGR_MOR = (0x37 << 16) | BOARD_OSCOUNT | CKGR_MOR_MOSCRCEN | CKGR_MOR_MOSCXTEN;
|
||||
timeout = 0;
|
||||
while (!(pmcptr->PMC_SR & PMC_SR_MOSCXTS) && (++timeout < CLOCK_TIMEOUT));
|
||||
|
||||
}
|
||||
|
||||
/* Switch to 3-20MHz Xtal oscillator */
|
||||
pmcptr->CKGR_MOR = (0x37 << 16) | BOARD_OSCOUNT | CKGR_MOR_MOSCRCEN | CKGR_MOR_MOSCXTEN | CKGR_MOR_MOSCSEL;
|
||||
timeout = 0;
|
||||
while (!(pmcptr->PMC_SR & PMC_SR_MOSCSELS) && (++timeout < CLOCK_TIMEOUT));
|
||||
|
||||
pmcptr->PMC_MCKR = (PMC->PMC_MCKR & ~(uint32_t)PMC_MCKR_CSS) | PMC_MCKR_CSS_MAIN_CLK;
|
||||
timeout = 0;
|
||||
while (!(pmcptr->PMC_SR & PMC_SR_MCKRDY) && (++timeout < CLOCK_TIMEOUT));
|
||||
|
||||
/* Initialize PLLA 72 MHz */
|
||||
pmcptr->CKGR_PLLAR = BOARD_PLLR;
|
||||
timeout = 0;
|
||||
while (!(pmcptr->PMC_SR & PMC_SR_LOCKA) && (++timeout < CLOCK_TIMEOUT));
|
||||
|
||||
|
||||
/* Initialize UTMI for USB usage, can be disabled if not using USB for the sake of saving power*/
|
||||
//AT91C_BASE_CKGR->CKGR_UCKR |= (AT91C_CKGR_UPLLCOUNT & (3 << 20)) | AT91C_CKGR_UPLLEN;
|
||||
//timeout = 0;
|
||||
//while (!(PMC->PMC_SR & AT91C_PMC_LOCKU) && (timeout++ < CLOCK_TIMEOUT));
|
||||
|
||||
/* Switch to fast clock
|
||||
**********************/
|
||||
// PMC->PMC_MCKR = (BOARD_MCKR & ~PMC_MCKR_CSS) | PMC_MCKR_CSS_MAIN_CLK;
|
||||
// timeout = 0;
|
||||
// while (!(PMC->PMC_SR & PMC_SR_MCKRDY) && (timeout++ < CLOCK_TIMEOUT));
|
||||
|
||||
// Switch to PLLA as main clock 36MHz
|
||||
PMC->PMC_MCKR = BOARD_MCKR;
|
||||
timeout = 0;
|
||||
while (!(PMC->PMC_SR & PMC_SR_MCKRDY) && (timeout++ < CLOCK_TIMEOUT));
|
||||
|
||||
#endif
|
||||
return 36000000L ; // Master_frequency
|
||||
}
|
||||
|
||||
void revert_osc()
|
||||
{
|
||||
register uint32_t timeout = 0 ;
|
||||
register Pmc *pmcptr ;
|
||||
|
||||
pmcptr = PMC ;
|
||||
|
||||
|
||||
// Switch back to the internal oscillator
|
||||
pmcptr->CKGR_MOR = (0x37 << 16) | BOARD_OSCOUNT | CKGR_MOR_MOSCRCEN | CKGR_MOR_MOSCXTEN ;
|
||||
timeout = 0;
|
||||
while (!(pmcptr->PMC_SR & PMC_SR_MOSCSELS) && (++timeout < CLOCK_TIMEOUT));
|
||||
|
||||
pmcptr->PMC_MCKR = (PMC->PMC_MCKR & ~(uint32_t)PMC_MCKR_CSS) | PMC_MCKR_CSS_SLOW_CLK;
|
||||
timeout = 0;
|
||||
while (!(pmcptr->PMC_SR & PMC_SR_MCKRDY) && (++timeout < CLOCK_TIMEOUT));
|
||||
|
||||
|
||||
pmcptr->CKGR_PLLAR = 1 << 29 ; // Stop PLLA
|
||||
|
||||
}
|
||||
|
||||
/*----------------------------------------------------------------------------
|
||||
* Exported functions
|
||||
*----------------------------------------------------------------------------*/
|
||||
|
||||
/*----------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Performs the low-level initialization of the chip. This includes EFC,
|
||||
* master clock and watchdog configuration.
|
||||
*/
|
||||
/*----------------------------------------------------------------------------*/
|
||||
uint32_t SystemInit (void)
|
||||
{
|
||||
/** Set 2 cycle (1 WS) for Embedded Flash Access */
|
||||
// Max clock is 38 MHz (1.8V VVDCORE)
|
||||
EFC->EEFC_FMR = (1 << 8) ;
|
||||
|
||||
/** Configure PMC */
|
||||
return BOARD_ConfigurePmc();
|
||||
}
|
||||
Reference in New Issue
Block a user