Bsongis/move everything (#3669)
* Directories moved * Directories moved * Directories moved * Directories moved * Directories moved * rename horus directories in gui to 480x272 * Directories moved * Rename taranis to 212x64 * Directories moved - TARANIS target removed, it's now X9E / X9D+ / X9D * Directories moved - TARANIS target removed, it's now X9E / X9D+ / X9D * Directories moved - TARANIS target removed, it's now X9E / X9D+ / X9D * Directories moved - TARANIS target removed, it's now X9E / X9D+ / X9D * Directories moved - TARANIS target removed, it's now X9E / X9D+ / X9D * Directories moved - TARANIS target removed, it's now X9E / X9D+ / X9D * Directories moved - TARANIS target removed, it's now X9E / X9D+ / X9D * Fix x9e compile * Directories moved - TARANIS target removed, it's now X9E / X9D+ / X9D * Directories moved - TARANIS target removed, it's now X9E / X9D+ / X9D * Directories moved - TARANIS target removed, it's now X9E / X9D+ / X9D * Directories moved - TARANIS target removed, it's now X9E / X9D+ / X9D * Directories moved - TARANIS target removed, it's now X9E / X9D+ / X9D * Minor improvement of path handling * Another bunch of files renamed :) * Another bunch of files renamed :) * Another bunch of files renamed :) * Another bunch of files renamed :) * Another bunch of files renamed :) * Rename 9x to 128x64 * Compilation fixes * Compilation fixes * Compilation fixes * Compilation fixes * Compilation fixes * Compilation fixes
This commit is contained in:
@@ -5,11 +5,11 @@ set(MCU atmega64)
|
||||
string(TOLOWER ${PCB} FLAVOUR)
|
||||
set(EEPROM_VARIANT_NEEDED ON)
|
||||
set(EEPROM EEPROM_RLC)
|
||||
set(GUI_DIR 9x)
|
||||
set(GUI_DIR 128x64)
|
||||
set(TARGET_DIR 9x)
|
||||
set(FIRMWARE_DEPENDENCIES ${FIRMWARE_DEPENDENCIES} 9x_bitmaps)
|
||||
add_definitions(-DPCBSTD -DPCB${PCB} -DCPUM64)
|
||||
set(TARGET_SRC ${TARGET_SRC} board_stock.cpp)
|
||||
set(TARGET_SRC ${TARGET_SRC} board.cpp)
|
||||
set(GUI_SRC ${GUI_SRC} ${9X_GUI_SRC})
|
||||
if(SP22)
|
||||
add_definitions(-DSP22)
|
||||
|
||||
@@ -75,7 +75,6 @@ endif()
|
||||
add_definitions(-DCPUARM)
|
||||
add_definitions(-DFRSKY -DFRSKY_SPORT -DFRSKY_HUB -DGPS -DPXX -DDSM2)
|
||||
add_definitions(-DBOLD_FONT -DBATTGRAPH -DTHRTRACE)
|
||||
include_directories(targets/${TARGET_DIR} ${THIRDPARTY_DIR})
|
||||
include_directories(${COOS_DIR} ${COOS_DIR}/kernel ${COOS_DIR}/portable)
|
||||
foreach(LANGUAGE ${TTS_LANGUAGES})
|
||||
set(SRC ${SRC} translations/tts_${LANGUAGE}.cpp)
|
||||
|
||||
@@ -4,6 +4,7 @@ set(ARCH ARM)
|
||||
set(STM32USB_DIR ${THIRDPARTY_DIR}/STM32_USB-Host-Device_Lib_V2.1.0/Libraries)
|
||||
add_definitions(-DCPUSTM32)
|
||||
add_definitions(-DSBUS -DCROSSFIRE)
|
||||
include_directories(${RADIO_SRC_DIRECTORY}/targets/common/arm/stm32)
|
||||
include_directories(${STM32USB_DIR}/STM32_USB_OTG_Driver/inc)
|
||||
include_directories(${STM32USB_DIR}/STM32_USB_Device_Library/Core/inc)
|
||||
include_directories(${STM32USB_DIR}/STM32_USB_Device_Library/Class/msc/inc)
|
||||
@@ -19,15 +20,16 @@ set(STM32USB_SRC
|
||||
)
|
||||
set(FIRMWARE_TARGET_SRC
|
||||
${FIRMWARE_TARGET_SRC}
|
||||
usb_bsp.c
|
||||
usbd_desc.c
|
||||
usbd_usr.cpp
|
||||
../common/arm/stm32/usb_bsp.c
|
||||
../common/arm/stm32/usbd_desc.c
|
||||
../common/arm/stm32/usbd_usr.cpp
|
||||
../common/arm/stm32/usb_driver.c
|
||||
)
|
||||
if(USB STREQUAL SERIAL)
|
||||
add_definitions(-DUSB_SERIAL)
|
||||
set(FIRMWARE_TARGET_SRC
|
||||
${FIRMWARE_TARGET_SRC}
|
||||
usbd_cdc.cpp
|
||||
../common/arm/stm32/usbd_cdc.cpp
|
||||
)
|
||||
set(STM32USB_SRC
|
||||
${STM32USB_SRC}
|
||||
@@ -50,7 +52,7 @@ else()
|
||||
add_definitions(-DUSB_JOYSTICK)
|
||||
set(FIRMWARE_TARGET_SRC
|
||||
${FIRMWARE_TARGET_SRC}
|
||||
usbd_hid_joystick.c
|
||||
../common/arm/stm32/usbd_hid_joystick.c
|
||||
)
|
||||
endif()
|
||||
if(GVARS)
|
||||
|
||||
@@ -18,5 +18,5 @@ set(STM32LIB_SRC
|
||||
STM32F2xx_StdPeriph_Driver/src/stm32f2xx_pwr.c
|
||||
STM32F2xx_StdPeriph_Driver/src/stm32f2xx_usart.c
|
||||
)
|
||||
set(FIRMWARE_TARGET_SRC ${FIRMWARE_TARGET_SRC} system_stm32f2xx.c)
|
||||
set(FIRMWARE_TARGET_SRC ${FIRMWARE_TARGET_SRC} ../common/arm/stm32/f2/system_stm32f2xx.c)
|
||||
|
||||
|
||||
@@ -18,5 +18,5 @@ set(STM32LIB_SRC
|
||||
STM32F4xx_StdPeriph_Driver/src/stm32f4xx_pwr.c
|
||||
STM32F4xx_StdPeriph_Driver/src/stm32f4xx_usart.c
|
||||
)
|
||||
set(FIRMWARE_TARGET_SRC ${FIRMWARE_TARGET_SRC} system_stm32f4xx.c)
|
||||
set(FIRMWARE_TARGET_SRC ${FIRMWARE_TARGET_SRC} ../common/arm/stm32/f4/system_stm32f4xx.c)
|
||||
|
||||
|
||||
+16
-34
@@ -1,23 +1,3 @@
|
||||
/*
|
||||
* Copyright (C) OpenTX
|
||||
*
|
||||
* Based on code named
|
||||
* th9x - http://code.google.com/p/th9x
|
||||
* er9x - http://code.google.com/p/er9x
|
||||
* gruvin9x - http://code.google.com/p/gruvin9x
|
||||
*
|
||||
* License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file system_stm32f4xx.c
|
||||
@@ -28,20 +8,20 @@
|
||||
* This file contains the system clock configuration for STM32F4xx devices,
|
||||
* and is generated by the clock configuration tool
|
||||
* stm32f4xx_Clock_Configuration_V1.1.0.xls
|
||||
*
|
||||
* 1. This file provides two functions and one global variable to be called from
|
||||
*
|
||||
* 1. This file provides two functions and one global variable to be called from
|
||||
* user application:
|
||||
* - SystemInit(): Setups the system clock (System clock source, PLL Multiplier
|
||||
* and Divider factors, AHB/APBx prescalers and Flash settings),
|
||||
* depending on the configuration made in the clock xls tool.
|
||||
* This function is called at startup just after reset and
|
||||
* depending on the configuration made in the clock xls tool.
|
||||
* This function is called at startup just after reset and
|
||||
* before branch to main program. This call is made inside
|
||||
* the "startup_stm32f4xx.s" file.
|
||||
*
|
||||
* - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
|
||||
* by the user application to setup the SysTick
|
||||
* by the user application to setup the SysTick
|
||||
* timer or configure other parameters.
|
||||
*
|
||||
*
|
||||
* - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
|
||||
* be called whenever the core clock is changed
|
||||
* during program execution.
|
||||
@@ -51,7 +31,7 @@
|
||||
* configure the system clock before to branch to main program.
|
||||
*
|
||||
* 3. If the system clock source selected by user fails to startup, the SystemInit()
|
||||
* function will do nothing and HSI still used as system clock source. User can
|
||||
* function will do nothing and HSI still used as system clock source. User can
|
||||
* add some code to deal with this issue inside the SetSysClock() function.
|
||||
*
|
||||
* 4. The default value of HSE crystal is set to 25MHz, refer to "HSE_VALUE" define
|
||||
@@ -108,7 +88,7 @@
|
||||
* SDIO and RNG clock |
|
||||
*-----------------------------------------------------------------------------
|
||||
*=============================================================================
|
||||
******************************************************************************
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2013 STMicroelectronics</center></h2>
|
||||
@@ -119,15 +99,15 @@
|
||||
*
|
||||
* http://www.st.com/software_license_agreement_liberty_v2
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
|
||||
/** @addtogroup CMSIS
|
||||
* @{
|
||||
*/
|
||||
@@ -255,13 +235,15 @@ void SystemInit(void)
|
||||
|
||||
/* Disable all interrupts */
|
||||
RCC->CIR = 0x00000000;
|
||||
|
||||
|
||||
#if defined(SDRAM)
|
||||
void SDRAM_Init();
|
||||
void FMC_SDRAMWriteProtectionConfig(uint32_t SDRAM_Bank, FunctionalState NewState);
|
||||
|
||||
SDRAM_Init(); // calls SDRAM_GPIOConfig()
|
||||
FMC_SDRAMWriteProtectionConfig(((uint32_t)0x00000001), DISABLE);
|
||||
|
||||
#endif
|
||||
|
||||
#ifdef DATA_IN_ExtSRAM
|
||||
SystemInit_ExtMemCtl();
|
||||
#endif /* DATA_IN_ExtSRAM */
|
||||
@@ -426,7 +408,7 @@ static void SetSysClock(void)
|
||||
}
|
||||
|
||||
/* Configure Flash prefetch, Instruction cache, Data cache and wait state */
|
||||
FLASH->ACR = FLASH_ACR_PRFTEN | FLASH_ACR_ICEN |FLASH_ACR_DCEN |FLASH_ACR_LATENCY_5WS;
|
||||
FLASH->ACR = FLASH_ACR_PRFTEN | FLASH_ACR_ICEN | FLASH_ACR_DCEN | FLASH_ACR_LATENCY_5WS;
|
||||
|
||||
/* Select the main PLL as system clock source */
|
||||
RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
|
||||
@@ -21,7 +21,7 @@
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
|
||||
#include "usb_bsp.h"
|
||||
#include "board_horus.h"
|
||||
#include "board.h"
|
||||
#include "usbd_conf.h"
|
||||
|
||||
extern uint32_t SystemCoreClock;
|
||||
+25
-25
@@ -1,28 +1,28 @@
|
||||
/*
|
||||
* Copyright (C) OpenTX
|
||||
*
|
||||
* Based on code named
|
||||
* th9x - http://code.google.com/p/th9x
|
||||
* er9x - http://code.google.com/p/er9x
|
||||
* gruvin9x - http://code.google.com/p/gruvin9x
|
||||
*
|
||||
* License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef _USB_CONF_H_
|
||||
#define _USB_CONF_H_
|
||||
/*
|
||||
* Copyright (C) OpenTX
|
||||
*
|
||||
* Based on code named
|
||||
* th9x - http://code.google.com/p/th9x
|
||||
* er9x - http://code.google.com/p/er9x
|
||||
* gruvin9x - http://code.google.com/p/gruvin9x
|
||||
*
|
||||
* License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#if defined(REV9E)
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef _USB_CONF_H_
|
||||
#define _USB_CONF_H_
|
||||
|
||||
#if defined(STM32F4)
|
||||
#include "STM32F4xx_DSP_StdPeriph_Lib_V1.4.0/Libraries/CMSIS/Device/ST/STM32F4xx/Include/stm32f4xx.h"
|
||||
#else
|
||||
#include "STM32F2xx_StdPeriph_Lib_V1.1.0/Libraries/CMSIS/Device/ST/STM32F2xx/Include/stm32f2xx.h"
|
||||
@@ -162,7 +162,7 @@
|
||||
#endif /* __CC_ARM */
|
||||
#endif
|
||||
|
||||
#endif // _USB_CONF_H_
|
||||
#endif // _USB_CONF_H_
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
||||
+1
-1
@@ -18,7 +18,7 @@
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#include "board_horus.h"
|
||||
#include "board.h"
|
||||
#include "STM32_USB-Host-Device_Lib_V2.1.0/Libraries/STM32_USB_OTG_Driver/inc/usb_dcd_int.h"
|
||||
#include "debug.h"
|
||||
|
||||
+24
-24
@@ -1,29 +1,29 @@
|
||||
/*
|
||||
* Copyright (C) OpenTX
|
||||
*
|
||||
* Based on code named
|
||||
* th9x - http://code.google.com/p/th9x
|
||||
* er9x - http://code.google.com/p/er9x
|
||||
* gruvin9x - http://code.google.com/p/gruvin9x
|
||||
*
|
||||
* License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
/*
|
||||
* Copyright (C) OpenTX
|
||||
*
|
||||
* Based on code named
|
||||
* th9x - http://code.google.com/p/th9x
|
||||
* er9x - http://code.google.com/p/er9x
|
||||
* gruvin9x - http://code.google.com/p/gruvin9x
|
||||
*
|
||||
* License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "usbd_desc.h"
|
||||
|
||||
#include <string.h>
|
||||
|
||||
#include "board_taranis.h"
|
||||
#include "board.h"
|
||||
#include "usbd_conf.h"
|
||||
#include "usbd_core.h"
|
||||
#include "usbd_req.h"
|
||||
@@ -60,17 +60,17 @@
|
||||
|
||||
#if defined(USB_JOYSTICK)
|
||||
#define USBD_PID 0x5710
|
||||
#define USBD_PRODUCT_FS_STRING "FrSky Taranis Joystick"
|
||||
#define USBD_PRODUCT_FS_STRING USB_NAME " Joystick"
|
||||
#define USBD_CONFIGURATION_FS_STRING "HID Config"
|
||||
#define USBD_INTERFACE_FS_STRING "HID Interface"
|
||||
#elif defined(USB_SERIAL)
|
||||
#define USBD_PID 0x5740 // do not change, this ID is used by the ST USB driver for Windows
|
||||
#define USBD_PRODUCT_FS_STRING "FrSky Taranis Serial Port"
|
||||
#define USBD_PRODUCT_FS_STRING USB_NAME " Serial Port"
|
||||
#define USBD_CONFIGURATION_FS_STRING "VSP Config"
|
||||
#define USBD_INTERFACE_FS_STRING "VSP Interface"
|
||||
#elif defined(USB_MASS_STORAGE)
|
||||
#define USBD_PID 0x5720
|
||||
#define USBD_PRODUCT_FS_STRING "FrSky Taranis Mass Storage"
|
||||
#define USBD_PRODUCT_FS_STRING USB_NAME " Mass Storage"
|
||||
#define USBD_CONFIGURATION_FS_STRING "MSC Config"
|
||||
#define USBD_INTERFACE_FS_STRING "MSC Interface"
|
||||
#endif
|
||||
+1
-1
@@ -112,7 +112,7 @@ void USBD_USR_DeviceConnected (void)
|
||||
*/
|
||||
void USBD_USR_DeviceDisconnected (void)
|
||||
{
|
||||
#if !defined(BOOT) && defined(USB_MASS_STORAGE) && !defined(PCBHORUS)
|
||||
#if !defined(BOOT) && defined(USB_MASS_STORAGE) && defined(EEPROM)
|
||||
// TODO is it really needed if we didn't write the EEPROM?
|
||||
NVIC_SystemReset();
|
||||
#endif
|
||||
@@ -3,10 +3,10 @@ set(MCU atmega2560)
|
||||
string(TOLOWER ${PCB} FLAVOUR)
|
||||
set(EEPROM EEPROM_RLC)
|
||||
add_definitions(-DEEPROM_VARIANT=0)
|
||||
set(GUI_DIR 9x)
|
||||
set(GUI_DIR 128x64)
|
||||
set(TARGET_DIR gruvin9x)
|
||||
set(FIRMWARE_DEPENDENCIES ${FIRMWARE_DEPENDENCIES} 9x_bitmaps)
|
||||
add_definitions(-DPCB${PCB} -DCPUM2560 -DROTARY_ENCODERS=2)
|
||||
set(TARGET_SRC ${TARGET_SRC} board_gruvin9x.cpp)
|
||||
set(TARGET_SRC ${TARGET_SRC} board.cpp)
|
||||
set(GUI_SRC ${GUI_SRC} ${9X_GUI_SRC})
|
||||
set(FIRMWARE_SRC ${FIRMWARE_SRC} targets/9x/lcd_driver.cpp)
|
||||
|
||||
@@ -1,75 +1,75 @@
|
||||
set(CPU_TYPE STM32F4)
|
||||
set(HSE_VALUE 12000000)
|
||||
set(SDCARD YES)
|
||||
set(EEPROM SDCARD)
|
||||
set(HAPTIC YES)
|
||||
set(GUI_DIR horus)
|
||||
set(TARGET_DIR horus)
|
||||
set(LINKER_SCRIPT targets/horus/stm32f4_flash.ld)
|
||||
set(FIRMWARE_DEPENDENCIES ${FIRMWARE_DEPENDENCIES} horus_bitmaps)
|
||||
set(LUA_EXPORT lua_export_horus)
|
||||
set(FLAVOUR horus)
|
||||
set(VIRTUAL_INPUTS YES)
|
||||
set(RAMBACKUP YES)
|
||||
option(DISK_CACHE "Enable SD card disk cache" YES)
|
||||
add_definitions(-DPCBHORUS -DCOLORLCD -DSTM32F429_439xx -DPPM_PIN_UART -DPPM_PIN_TIMER)
|
||||
add_definitions(-DEEPROM_VARIANT=0 -DAUDIO -DVOICE -DRTCLOCK)
|
||||
add_definitions(-DLUAINPUTS -DXCURVES -DVARIO)
|
||||
include_directories(${RADIO_SRC_DIRECTORY}/fonts/horus gui/${GUI_DIR} gui/${GUI_DIR}/layouts)
|
||||
file(GLOB THEMES_SRC RELATIVE ${RADIO_SRC_DIRECTORY}/gui/horus ${RADIO_SRC_DIRECTORY}/gui/horus/themes/*.cpp)
|
||||
file(GLOB LAYOUTS_SRC RELATIVE ${RADIO_SRC_DIRECTORY}/gui/horus ${RADIO_SRC_DIRECTORY}/gui/horus/layouts/*.cpp)
|
||||
file(GLOB WIDGETS_SRC RELATIVE ${RADIO_SRC_DIRECTORY}/gui/horus ${RADIO_SRC_DIRECTORY}/gui/horus/widgets/*.cpp)
|
||||
set(GUI_SRC
|
||||
${GUI_SRC}
|
||||
bitmapbuffer.cpp
|
||||
curves.cpp
|
||||
bitmaps.cpp
|
||||
menu_general_hardware.cpp
|
||||
menu_model_inputs.cpp
|
||||
menu_model_mixes.cpp
|
||||
view_channels.cpp
|
||||
view_logical_switches.cpp
|
||||
view_about.cpp
|
||||
view_text.cpp
|
||||
screens_setup.cpp
|
||||
theme.cpp
|
||||
topbar.cpp
|
||||
layout.cpp
|
||||
widget.cpp
|
||||
${THEMES_SRC}
|
||||
${LAYOUTS_SRC}
|
||||
${WIDGETS_SRC}
|
||||
)
|
||||
set(SRC ${SRC} targets/taranis/rtc_driver.cpp)
|
||||
if(DISK_CACHE)
|
||||
set(SRC ${SRC} disk_cache.cpp)
|
||||
add_definitions(-DDISK_CACHE)
|
||||
endif()
|
||||
set(TARGET_SRC
|
||||
${TARGET_SRC}
|
||||
board_horus.cpp
|
||||
extmodule_driver.cpp
|
||||
)
|
||||
set(FIRMWARE_TARGET_SRC
|
||||
${FIRMWARE_TARGET_SRC}
|
||||
sdio_sd.c
|
||||
lcd_driver.cpp
|
||||
delays.c
|
||||
usb_driver.c
|
||||
pwr_driver.cpp
|
||||
sdram_driver.c
|
||||
led_driver.cpp
|
||||
startup_stm32f40_41xxx.s
|
||||
)
|
||||
set(STM32LIB_SRC
|
||||
STM32F4xx_StdPeriph_Driver/src/stm32f4xx_sdio.c
|
||||
STM32F4xx_StdPeriph_Driver/src/stm32f4xx_fmc.c
|
||||
STM32F4xx_StdPeriph_Driver/src/stm32f4xx_ltdc.c
|
||||
STM32F4xx_StdPeriph_Driver/src/stm32f4xx_tim.c
|
||||
STM32F4xx_StdPeriph_Driver/src/stm32f4xx_dma2d.c
|
||||
)
|
||||
add_custom_target(datacopy
|
||||
WORKING_DIRECTORY ${RADIO_DIRECTORY}/src
|
||||
COMMAND python ${RADIO_DIRECTORY}/util/generate_datacopy.py datastructs.h -DPCBHORUS -DCPUARM -DCOLORLCD -DVIRTUALINPUTS -DBACKUP > storage/datacopy.cpp
|
||||
DEPENDS ${RADIO_DIRECTORY}/src/datastructs.h ${RADIO_DIRECTORY}/util/generate_datacopy.py
|
||||
set(CPU_TYPE STM32F4)
|
||||
set(HSE_VALUE 12000000)
|
||||
set(SDCARD YES)
|
||||
set(EEPROM SDCARD)
|
||||
set(HAPTIC YES)
|
||||
set(GUI_DIR 480x272)
|
||||
set(TARGET_DIR horus)
|
||||
set(LINKER_SCRIPT targets/horus/stm32f4_flash.ld)
|
||||
set(FIRMWARE_DEPENDENCIES ${FIRMWARE_DEPENDENCIES} horus_bitmaps)
|
||||
set(LUA_EXPORT lua_export_horus)
|
||||
set(FLAVOUR horus)
|
||||
add_definitions(-DUSB_NAME="FrSky Horus")
|
||||
set(VIRTUAL_INPUTS YES)
|
||||
set(RAMBACKUP YES)
|
||||
option(DISK_CACHE "Enable SD card disk cache" YES)
|
||||
add_definitions(-DPCBHORUS -DCOLORLCD -DSTM32F429_439xx -DSDRAM -DPPM_PIN_UART -DPPM_PIN_TIMER)
|
||||
add_definitions(-DEEPROM_VARIANT=0 -DAUDIO -DVOICE -DRTCLOCK)
|
||||
add_definitions(-DLUAINPUTS -DXCURVES -DVARIO)
|
||||
include_directories(${RADIO_SRC_DIRECTORY}/fonts/480x272 gui/${GUI_DIR} gui/${GUI_DIR}/layouts)
|
||||
file(GLOB THEMES_SRC RELATIVE ${RADIO_SRC_DIRECTORY}/gui/480x272 ${RADIO_SRC_DIRECTORY}/gui/480x272/themes/*.cpp)
|
||||
file(GLOB LAYOUTS_SRC RELATIVE ${RADIO_SRC_DIRECTORY}/gui/480x272 ${RADIO_SRC_DIRECTORY}/gui/480x272/layouts/*.cpp)
|
||||
file(GLOB WIDGETS_SRC RELATIVE ${RADIO_SRC_DIRECTORY}/gui/480x272 ${RADIO_SRC_DIRECTORY}/gui/480x272/widgets/*.cpp)
|
||||
set(GUI_SRC
|
||||
${GUI_SRC}
|
||||
bitmapbuffer.cpp
|
||||
curves.cpp
|
||||
bitmaps.cpp
|
||||
radio_hardware.cpp
|
||||
model_inputs.cpp
|
||||
model_mixes.cpp
|
||||
view_channels.cpp
|
||||
view_logical_switches.cpp
|
||||
view_about.cpp
|
||||
view_text.cpp
|
||||
screens_setup.cpp
|
||||
theme.cpp
|
||||
topbar.cpp
|
||||
layout.cpp
|
||||
widget.cpp
|
||||
${THEMES_SRC}
|
||||
${LAYOUTS_SRC}
|
||||
${WIDGETS_SRC}
|
||||
)
|
||||
set(SRC ${SRC} targets/taranis/rtc_driver.cpp)
|
||||
if(DISK_CACHE)
|
||||
set(SRC ${SRC} disk_cache.cpp)
|
||||
add_definitions(-DDISK_CACHE)
|
||||
endif()
|
||||
set(TARGET_SRC
|
||||
${TARGET_SRC}
|
||||
board.cpp
|
||||
extmodule_driver.cpp
|
||||
)
|
||||
set(FIRMWARE_TARGET_SRC
|
||||
${FIRMWARE_TARGET_SRC}
|
||||
sdio_sd.c
|
||||
lcd_driver.cpp
|
||||
delays.c
|
||||
pwr_driver.cpp
|
||||
sdram_driver.c
|
||||
led_driver.cpp
|
||||
startup_stm32f40_41xxx.s
|
||||
)
|
||||
set(STM32LIB_SRC
|
||||
STM32F4xx_StdPeriph_Driver/src/stm32f4xx_sdio.c
|
||||
STM32F4xx_StdPeriph_Driver/src/stm32f4xx_fmc.c
|
||||
STM32F4xx_StdPeriph_Driver/src/stm32f4xx_ltdc.c
|
||||
STM32F4xx_StdPeriph_Driver/src/stm32f4xx_tim.c
|
||||
STM32F4xx_StdPeriph_Driver/src/stm32f4xx_dma2d.c
|
||||
)
|
||||
add_custom_target(datacopy
|
||||
WORKING_DIRECTORY ${RADIO_DIRECTORY}/src
|
||||
COMMAND python ${RADIO_DIRECTORY}/util/generate_datacopy.py datastructs.h -DPCBHORUS -DCPUARM -DCOLORLCD -DVIRTUALINPUTS -DBACKUP > storage/datacopy.cpp
|
||||
DEPENDS ${RADIO_DIRECTORY}/src/datastructs.h ${RADIO_DIRECTORY}/util/generate_datacopy.py
|
||||
)
|
||||
|
||||
@@ -19,7 +19,7 @@
|
||||
*/
|
||||
|
||||
#include <OsConfig.h>
|
||||
#include "board_horus.h"
|
||||
#include "board.h"
|
||||
|
||||
#define SYSTEM_TICKS_1US ((CFG_CPU_FREQ + 500000) / 1000000) // number of system ticks in 1us
|
||||
#define SYSTEM_TICKS_01US ((CFG_CPU_FREQ + 5000000) / 10000000) // number of system ticks in 0.1us (rounding needed for sys frequencies that are not multiple of 10MHz)
|
||||
|
||||
@@ -18,7 +18,7 @@
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#include "../horus/board_horus.h"
|
||||
#include "board.h"
|
||||
|
||||
void ledOn()
|
||||
{
|
||||
|
||||
@@ -19,7 +19,7 @@
|
||||
*/
|
||||
|
||||
#include "pwr.h"
|
||||
#include "board_horus.h"
|
||||
#include "board.h"
|
||||
|
||||
void pwrInit()
|
||||
{
|
||||
@@ -107,4 +107,4 @@ void pwrResetHandler()
|
||||
|
||||
pwrOn();
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
@@ -22,7 +22,7 @@
|
||||
#ifndef _SDIO_SD_H_
|
||||
#define _SDIO_SD_H_
|
||||
|
||||
#include "board_horus.h"
|
||||
#include "board.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
|
||||
@@ -18,7 +18,7 @@
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#include "../horus/board_horus.h"
|
||||
#include "board.h"
|
||||
|
||||
#define SDRAM_MEMORY_WIDTH FMC_SDMemory_Width_16b
|
||||
|
||||
|
||||
@@ -1,164 +0,0 @@
|
||||
/*
|
||||
* Copyright (C) OpenTX
|
||||
*
|
||||
* Based on code named
|
||||
* th9x - http://code.google.com/p/th9x
|
||||
* er9x - http://code.google.com/p/er9x
|
||||
* gruvin9x - http://code.google.com/p/gruvin9x
|
||||
*
|
||||
* License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef _USB_CONF_H_
|
||||
#define _USB_CONF_H_
|
||||
|
||||
#include "STM32F4xx_DSP_StdPeriph_Lib_V1.4.0/Libraries/CMSIS/Device/ST/STM32F4xx/Include/stm32f4xx.h"
|
||||
|
||||
/* USB Core and PHY interface configuration.
|
||||
Tip: To avoid modifying these defines each time you need to change the USB
|
||||
configuration, you can declare the needed define in your toolchain
|
||||
compiler preprocessor.
|
||||
*/
|
||||
/****************** USB OTG FS PHY CONFIGURATION *******************************
|
||||
* The USB OTG FS Core supports one on-chip Full Speed PHY.
|
||||
*
|
||||
* The USE_EMBEDDED_PHY symbol is defined in the project compiler preprocessor
|
||||
* when FS core is used.
|
||||
*******************************************************************************/
|
||||
#ifndef USE_USB_OTG_FS
|
||||
#define USE_USB_OTG_FS // USB2.0 Full Speed == 12 Mbit
|
||||
#endif /* USE_USB_OTG_FS */
|
||||
|
||||
#ifdef USE_USB_OTG_FS
|
||||
#define USB_OTG_FS_CORE
|
||||
#endif
|
||||
|
||||
/*******************************************************************************
|
||||
* FIFO Size Configuration in Device mode
|
||||
*
|
||||
* (i) Receive data FIFO size = RAM for setup packets +
|
||||
* OUT endpoint control information +
|
||||
* data OUT packets + miscellaneous
|
||||
* Space = ONE 32-bits words
|
||||
* --> RAM for setup packets = 10 spaces
|
||||
* (n is the nbr of CTRL EPs the device core supports)
|
||||
* --> OUT EP CTRL info = 1 space
|
||||
* (one space for status information written to the FIFO along with each
|
||||
* received packet)
|
||||
* --> data OUT packets = (Largest Packet Size / 4) + 1 spaces
|
||||
* (MINIMUM to receive packets)
|
||||
* --> OR data OUT packets = at least 2*(Largest Packet Size / 4) + 1 spaces
|
||||
* (if high-bandwidth EP is enabled or multiple isochronous EPs)
|
||||
* --> miscellaneous = 1 space per OUT EP
|
||||
* (one space for transfer complete status information also pushed to the
|
||||
* FIFO with each endpoint's last packet)
|
||||
*
|
||||
* (ii)MINIMUM RAM space required for each IN EP Tx FIFO = MAX packet size for
|
||||
* that particular IN EP. More space allocated in the IN EP Tx FIFO results
|
||||
* in a better performance on the USB and can hide latencies on the AHB.
|
||||
*
|
||||
* (iii) TXn min size = 16 words. (n : Transmit FIFO index)
|
||||
* (iv) When a TxFIFO is not used, the Configuration should be as follows:
|
||||
* case 1 : n > m and Txn is not used (n,m : Transmit FIFO indexes)
|
||||
* --> Txm can use the space allocated for Txn.
|
||||
* case2 : n < m and Txn is not used (n,m : Transmit FIFO indexes)
|
||||
* --> Txn should be configured with the minimum space of 16 words
|
||||
* (v) The FIFO is used optimally when used TxFIFOs are allocated in the top
|
||||
* of the FIFO.Ex: use EP1 and EP2 as IN instead of EP1 and EP3 as IN ones.
|
||||
* (vi) In HS case12 FIFO locations should be reserved for internal DMA registers
|
||||
* so total FIFO size should be 1012 Only instead of 1024
|
||||
*******************************************************************************/
|
||||
|
||||
/****************** USB OTG FS CONFIGURATION **********************************/
|
||||
#ifdef USB_OTG_FS_CORE
|
||||
#define RX_FIFO_FS_SIZE 128
|
||||
#define TX0_FIFO_FS_SIZE 64
|
||||
#define TX1_FIFO_FS_SIZE 128
|
||||
#define TX2_FIFO_FS_SIZE 0
|
||||
#define TX3_FIFO_FS_SIZE 0
|
||||
|
||||
// #define USB_OTG_FS_LOW_PWR_MGMT_SUPPORT
|
||||
// #define USB_OTG_FS_SOF_OUTPUT_ENABLED
|
||||
#endif
|
||||
|
||||
/****************** USB OTG MISC CONFIGURATION ********************************/
|
||||
#define VBUS_SENSING_ENABLED
|
||||
|
||||
/****************** USB OTG MODE CONFIGURATION ********************************/
|
||||
//#define USE_HOST_MODE
|
||||
#define USE_DEVICE_MODE
|
||||
//#define USE_OTG_MODE
|
||||
|
||||
#ifndef USB_OTG_FS_CORE
|
||||
#ifndef USB_OTG_HS_CORE
|
||||
#error "USB_OTG_HS_CORE or USB_OTG_FS_CORE should be defined"
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#ifndef USE_DEVICE_MODE
|
||||
#ifndef USE_HOST_MODE
|
||||
#error "USE_DEVICE_MODE or USE_HOST_MODE should be defined"
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#ifndef USE_USB_OTG_HS
|
||||
#ifndef USE_USB_OTG_FS
|
||||
#error "USE_USB_OTG_HS or USE_USB_OTG_FS should be defined"
|
||||
#endif
|
||||
#else //USE_USB_OTG_HS
|
||||
#ifndef USE_ULPI_PHY
|
||||
#ifndef USE_EMBEDDED_PHY
|
||||
#error "USE_ULPI_PHY or USE_EMBEDDED_PHY should be defined"
|
||||
#endif
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/****************** C Compilers dependant keywords ****************************/
|
||||
/* In HS mode and when the DMA is used, all variables and data structures dealing
|
||||
with the DMA during the transaction process should be 4-bytes aligned */
|
||||
#ifdef USB_OTG_HS_INTERNAL_DMA_ENABLED
|
||||
#if defined (__GNUC__) /* GNU Compiler */
|
||||
#define __ALIGN_END __attribute__ ((aligned (4)))
|
||||
#define __ALIGN_BEGIN
|
||||
#else
|
||||
#define __ALIGN_END
|
||||
#if defined (__CC_ARM) /* ARM Compiler */
|
||||
#define __ALIGN_BEGIN __align(4)
|
||||
#elif defined (__ICCARM__) /* IAR Compiler */
|
||||
#define __ALIGN_BEGIN
|
||||
#elif defined (__TASKING__) /* TASKING Compiler */
|
||||
#define __ALIGN_BEGIN __align(4)
|
||||
#endif /* __CC_ARM */
|
||||
#endif /* __GNUC__ */
|
||||
#else
|
||||
#define __ALIGN_BEGIN
|
||||
#define __ALIGN_END
|
||||
#endif /* USB_OTG_HS_INTERNAL_DMA_ENABLED */
|
||||
|
||||
/* __packed keyword used to decrease the data type alignment to 1-byte */
|
||||
#if !defined(__packed)
|
||||
#if defined (__CC_ARM) /* ARM Compiler */
|
||||
#define __packed __packed
|
||||
#elif defined (__ICCARM__) /* IAR Compiler */
|
||||
#define __packed __packed
|
||||
#elif defined ( __GNUC__ ) /* GNU Compiler */
|
||||
#define __packed __attribute__ ((__packed__))
|
||||
#elif defined (__TASKING__) /* TASKING Compiler */
|
||||
#define __packed __unaligned
|
||||
#endif /* __CC_ARM */
|
||||
#endif
|
||||
|
||||
#endif // _USB_CONF_H_
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
||||
@@ -1,64 +0,0 @@
|
||||
/*
|
||||
* Copyright (C) OpenTX
|
||||
*
|
||||
* Based on code named
|
||||
* th9x - http://code.google.com/p/th9x
|
||||
* er9x - http://code.google.com/p/er9x
|
||||
* gruvin9x - http://code.google.com/p/gruvin9x
|
||||
*
|
||||
* License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef _USBD_CONF_H_
|
||||
#define _USBD_CONF_H_
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "usb_conf.h"
|
||||
|
||||
#define USBD_CFG_MAX_NUM 1
|
||||
#define USBD_ITF_MAX_NUM 1
|
||||
#define USB_MAX_STR_DESC_SIZ 64
|
||||
|
||||
#define USBD_SELF_POWERED
|
||||
|
||||
/* Class Layer Parameter */
|
||||
|
||||
#define MSC_IN_EP 0x81
|
||||
#define MSC_OUT_EP 0x01
|
||||
#define MSC_MAX_PACKET 64
|
||||
|
||||
#define MSC_MEDIA_PACKET 4096
|
||||
|
||||
#define HID_IN_EP 0x81
|
||||
#define HID_OUT_EP 0x01
|
||||
|
||||
#define HID_IN_PACKET 9
|
||||
#define HID_OUT_PACKET 9
|
||||
|
||||
#define CDC_IN_EP 0x81 /* EP1 for data IN */
|
||||
#define CDC_OUT_EP 0x01 /* EP1 for data OUT */
|
||||
#define CDC_CMD_EP 0x82 /* EP2 for CDC commands */
|
||||
|
||||
/* CDC Endpoints parameters: you can fine tune these values depending on the needed baudrates and performance. */
|
||||
#define CDC_DATA_MAX_PACKET_SIZE 64 /* Endpoint IN & OUT Packet size */
|
||||
#define CDC_CMD_PACKET_SZE 8 /* Control Endpoint Packet size */
|
||||
|
||||
#define CDC_IN_FRAME_INTERVAL 5 /* Number of frames between IN transfers */
|
||||
#define APP_RX_DATA_SIZE 512 // USB serial port output buffer. TODO: tune this buffer size /* Total size of IN buffer: APP_RX_DATA_SIZE*8/MAX_BAUDARATE*1000 should be > CDC_IN_FRAME_INTERVAL */
|
||||
#define APP_FOPS VCP_fops
|
||||
|
||||
#endif // _USBD_CONF_H_
|
||||
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
||||
@@ -1,232 +0,0 @@
|
||||
/*
|
||||
* Copyright (C) OpenTX
|
||||
*
|
||||
* Based on code named
|
||||
* th9x - http://code.google.com/p/th9x
|
||||
* er9x - http://code.google.com/p/er9x
|
||||
* gruvin9x - http://code.google.com/p/gruvin9x
|
||||
*
|
||||
* License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "usbd_desc.h"
|
||||
|
||||
#include <string.h>
|
||||
|
||||
#include "board_horus.h"
|
||||
#include "usbd_conf.h"
|
||||
#include "usbd_core.h"
|
||||
#include "usbd_req.h"
|
||||
#include "usb_regs.h"
|
||||
|
||||
/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
|
||||
* @{
|
||||
*/
|
||||
|
||||
|
||||
/** @defgroup USBD_DESC
|
||||
* @brief USBD descriptors module
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_DESC_Private_TypesDefinitions
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @defgroup USBD_DESC_Private_Defines
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define USBD_VID 0x0483
|
||||
|
||||
#define USBD_LANGID_STRING 0x409
|
||||
#define USBD_MANUFACTURER_STRING "FrSky"
|
||||
#define USBD_SERIALNUMBER_FS_STRING "00000000001B"
|
||||
|
||||
|
||||
#if defined(USB_JOYSTICK)
|
||||
#define USBD_PID 0x5710
|
||||
#define USBD_PRODUCT_FS_STRING "FrSky Horus Joystick"
|
||||
#define USBD_CONFIGURATION_FS_STRING "HID Config"
|
||||
#define USBD_INTERFACE_FS_STRING "HID Interface"
|
||||
#elif defined(USB_SERIAL)
|
||||
#define USBD_PID 0x5740 // do not change, this ID is used by the ST USB driver for Windows
|
||||
#define USBD_PRODUCT_FS_STRING "FrSky Horus Serial Port"
|
||||
#define USBD_CONFIGURATION_FS_STRING "VSP Config"
|
||||
#define USBD_INTERFACE_FS_STRING "VSP Interface"
|
||||
#elif defined(USB_MASS_STORAGE)
|
||||
#define USBD_PID 0x5720
|
||||
#define USBD_PRODUCT_FS_STRING "FrSky Horus Mass Storage"
|
||||
#define USBD_CONFIGURATION_FS_STRING "MSC Config"
|
||||
#define USBD_INTERFACE_FS_STRING "MSC Interface"
|
||||
#endif
|
||||
|
||||
const USBD_DEVICE USR_desc =
|
||||
{
|
||||
USBD_USR_DeviceDescriptor,
|
||||
USBD_USR_LangIDStrDescriptor,
|
||||
USBD_USR_ManufacturerStrDescriptor,
|
||||
USBD_USR_ProductStrDescriptor,
|
||||
USBD_USR_SerialStrDescriptor,
|
||||
USBD_USR_ConfigStrDescriptor,
|
||||
USBD_USR_InterfaceStrDescriptor,
|
||||
};
|
||||
|
||||
/* USB Standard Device Descriptor */
|
||||
__ALIGN_BEGIN const uint8_t USBD_DeviceDesc[USB_SIZ_DEVICE_DESC] __ALIGN_END =
|
||||
{
|
||||
USB_SIZ_DEVICE_DESC, /*bLength */
|
||||
USB_DEVICE_DESCRIPTOR_TYPE, /*bDescriptorType*/
|
||||
0x00, /*bcdUSB */
|
||||
0x02,
|
||||
0x00, /*bDeviceClass*/
|
||||
0x00, /*bDeviceSubClass*/
|
||||
0x00, /*bDeviceProtocol*/
|
||||
USB_OTG_MAX_EP0_SIZE, /*bMaxPacketSize*/
|
||||
LOBYTE(USBD_VID), /*idVendor*/
|
||||
HIBYTE(USBD_VID), /*idVendor*/
|
||||
LOBYTE(USBD_PID), /*idVendor*/
|
||||
HIBYTE(USBD_PID), /*idVendor*/
|
||||
0x00, /*bcdDevice rel. 2.00*/
|
||||
0x02,
|
||||
USBD_IDX_MFC_STR, /*Index of manufacturer string*/
|
||||
USBD_IDX_PRODUCT_STR, /*Index of product string*/
|
||||
USBD_IDX_SERIAL_STR, /*Index of serial number string*/
|
||||
USBD_CFG_MAX_NUM /*bNumConfigurations*/
|
||||
}; /* USB_DeviceDescriptor */
|
||||
|
||||
/* USB Standard Device Descriptor */
|
||||
__ALIGN_BEGIN const uint8_t USBD_DeviceQualifierDesc[USB_LEN_DEV_QUALIFIER_DESC] __ALIGN_END =
|
||||
{
|
||||
USB_LEN_DEV_QUALIFIER_DESC,
|
||||
USB_DESC_TYPE_DEVICE_QUALIFIER,
|
||||
0x00,
|
||||
0x02,
|
||||
0x00,
|
||||
0x00,
|
||||
0x00,
|
||||
0x40,
|
||||
0x01,
|
||||
0x00,
|
||||
};
|
||||
|
||||
/* USB Standard Device Descriptor */
|
||||
__ALIGN_BEGIN const uint8_t USBD_LangIDDesc[USB_SIZ_STRING_LANGID] __ALIGN_END =
|
||||
{
|
||||
USB_SIZ_STRING_LANGID,
|
||||
USB_DESC_TYPE_STRING,
|
||||
LOBYTE(USBD_LANGID_STRING),
|
||||
HIBYTE(USBD_LANGID_STRING),
|
||||
};
|
||||
|
||||
/*
|
||||
* @brief USBD_USR_DeviceDescriptor
|
||||
* return the device descriptor
|
||||
* @param speed : current device speed
|
||||
* @param length : pointer to data length variable
|
||||
* @retval pointer to descriptor buffer
|
||||
*/
|
||||
uint8_t * USBD_USR_DeviceDescriptor( uint8_t speed , uint16_t *length)
|
||||
{
|
||||
*length = sizeof(USBD_DeviceDesc);
|
||||
memcpy(USBD_StrDesc, USBD_DeviceDesc, *length);
|
||||
return USBD_StrDesc;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief USBD_USR_LangIDStrDescriptor
|
||||
* return the LangID string descriptor
|
||||
* @param speed : current device speed
|
||||
* @param length : pointer to data length variable
|
||||
* @retval pointer to descriptor buffer
|
||||
*/
|
||||
uint8_t * USBD_USR_LangIDStrDescriptor( uint8_t speed , uint16_t *length)
|
||||
{
|
||||
*length = sizeof(USBD_LangIDDesc);
|
||||
memcpy(USBD_StrDesc, USBD_LangIDDesc, *length);
|
||||
return USBD_StrDesc;
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @brief USBD_USR_ProductStrDescriptor
|
||||
* return the product string descriptor
|
||||
* @param speed : current device speed
|
||||
* @param length : pointer to data length variable
|
||||
* @retval pointer to descriptor buffer
|
||||
*/
|
||||
uint8_t * USBD_USR_ProductStrDescriptor( uint8_t speed , uint16_t *length)
|
||||
{
|
||||
USBD_GetString ((uint8_t*)USBD_PRODUCT_FS_STRING, USBD_StrDesc, length);
|
||||
return USBD_StrDesc;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief USBD_USR_ManufacturerStrDescriptor
|
||||
* return the manufacturer string descriptor
|
||||
* @param speed : current device speed
|
||||
* @param length : pointer to data length variable
|
||||
* @retval pointer to descriptor buffer
|
||||
*/
|
||||
uint8_t * USBD_USR_ManufacturerStrDescriptor( uint8_t speed , uint16_t *length)
|
||||
{
|
||||
USBD_GetString ((uint8_t*)USBD_MANUFACTURER_STRING, USBD_StrDesc, length);
|
||||
return USBD_StrDesc;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief USBD_USR_SerialStrDescriptor
|
||||
* return the serial number string descriptor
|
||||
* @param speed : current device speed
|
||||
* @param length : pointer to data length variable
|
||||
* @retval pointer to descriptor buffer
|
||||
*/
|
||||
uint8_t * USBD_USR_SerialStrDescriptor( uint8_t speed , uint16_t *length)
|
||||
{
|
||||
USBD_GetString ((uint8_t*)USBD_SERIALNUMBER_FS_STRING, USBD_StrDesc, length);
|
||||
return USBD_StrDesc;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief USBD_USR_ConfigStrDescriptor
|
||||
* return the configuration string descriptor
|
||||
* @param speed : current device speed
|
||||
* @param length : pointer to data length variable
|
||||
* @retval pointer to descriptor buffer
|
||||
*/
|
||||
uint8_t * USBD_USR_ConfigStrDescriptor( uint8_t speed , uint16_t *length)
|
||||
{
|
||||
USBD_GetString ((uint8_t *)USBD_CONFIGURATION_FS_STRING, USBD_StrDesc, length);
|
||||
return USBD_StrDesc;
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @brief USBD_USR_InterfaceStrDescriptor
|
||||
* return the interface string descriptor
|
||||
* @param speed : current device speed
|
||||
* @param length : pointer to data length variable
|
||||
* @retval pointer to descriptor buffer
|
||||
*/
|
||||
uint8_t * USBD_USR_InterfaceStrDescriptor( uint8_t speed , uint16_t *length)
|
||||
{
|
||||
USBD_GetString ((uint8_t*)USBD_INTERFACE_FS_STRING, USBD_StrDesc, length);
|
||||
return USBD_StrDesc;
|
||||
}
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
||||
@@ -1,451 +0,0 @@
|
||||
/*
|
||||
* Copyright (C) OpenTX
|
||||
*
|
||||
* Based on code named
|
||||
* th9x - http://code.google.com/p/th9x
|
||||
* er9x - http://code.google.com/p/er9x
|
||||
* gruvin9x - http://code.google.com/p/gruvin9x
|
||||
*
|
||||
* License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "../horus/usbd_desc.h"
|
||||
#include "usbd_hid_core.h"
|
||||
#include "usbd_req.h"
|
||||
|
||||
/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
|
||||
* @{
|
||||
*/
|
||||
|
||||
|
||||
/** @defgroup USBD_HID
|
||||
* @brief usbd core module
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_HID_Private_TypesDefinitions
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @defgroup USBD_HID_Private_Defines
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @defgroup USBD_HID_Private_Macros
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
|
||||
|
||||
/** @defgroup USBD_HID_Private_FunctionPrototypes
|
||||
* @{
|
||||
*/
|
||||
|
||||
|
||||
static uint8_t USBD_HID_Init (void *pdev,
|
||||
uint8_t cfgidx);
|
||||
|
||||
static uint8_t USBD_HID_DeInit (void *pdev,
|
||||
uint8_t cfgidx);
|
||||
|
||||
static uint8_t USBD_HID_Setup (void *pdev,
|
||||
USB_SETUP_REQ *req);
|
||||
|
||||
static const uint8_t *USBD_HID_GetCfgDesc (uint8_t speed, uint16_t *length);
|
||||
|
||||
static uint8_t USBD_HID_DataIn (void *pdev, uint8_t epnum);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
|
||||
#ifdef USB_OTG_HS_INTERNAL_DMA_ENABLED
|
||||
#if defined ( __ICCARM__ ) /*!< IAR Compiler */
|
||||
#pragma data_alignment=4
|
||||
#endif
|
||||
#endif /* USB_OTG_HS_INTERNAL_DMA_ENABLED */
|
||||
/*
|
||||
This USB HID endpoint report description defines a device with:
|
||||
* 8 digital buttons
|
||||
* 8 analog axes with 8bit resolution
|
||||
|
||||
Repot packet described as C struct is:
|
||||
|
||||
struct {
|
||||
uint8_t buttons; //bit 0 - button 1, bit 1 - button 2, ..., mapped to channels 9-16, on if channel > 0
|
||||
uint8_t X; //analog value, mapped to channel 1
|
||||
uint8_t Y; //analog value, mapped to channel 2
|
||||
uint8_t Z; //analog value, mapped to channel 3
|
||||
uint8_t Rx; //analog value, mapped to channel 4
|
||||
uint8_t Ry //analog value, mapped to channel 5
|
||||
uint8_t Rz; //analog value, mapped to channel 6
|
||||
uint8_t S1; //analog value, mapped to channel 7
|
||||
uint8_t S2; //analog value, mapped to channel 8
|
||||
}
|
||||
*/
|
||||
__ALIGN_BEGIN static const uint8_t HID_JOYSTICK_ReportDesc[] __ALIGN_END =
|
||||
{
|
||||
0x05, 0x01, // USAGE_PAGE (Generic Desktop)
|
||||
0x09, 0x05, // USAGE (Game Pad)
|
||||
0xa1, 0x01, // COLLECTION (Application)
|
||||
0xa1, 0x00, // COLLECTION (Physical)
|
||||
0x05, 0x09, // USAGE_PAGE (Button)
|
||||
0x19, 0x01, // USAGE_MINIMUM (Button 1)
|
||||
0x29, 0x08, // USAGE_MAXIMUM (Button 8)
|
||||
0x15, 0x00, // LOGICAL_MINIMUM (0)
|
||||
0x25, 0x01, // LOGICAL_MAXIMUM (1)
|
||||
0x95, 0x08, // REPORT_COUNT (8)
|
||||
0x75, 0x01, // REPORT_SIZE (1)
|
||||
0x81, 0x02, // INPUT (Data,Var,Abs)
|
||||
0x05, 0x01, // USAGE_PAGE (Generic Desktop)
|
||||
0x09, 0x30, // USAGE (X)
|
||||
0x09, 0x31, // USAGE (Y)
|
||||
0x09, 0x32, // USAGE (Z)
|
||||
0x09, 0x33, // USAGE (Rx)
|
||||
0x09, 0x34, // USAGE (Ry)
|
||||
0x09, 0x35, // USAGE (Rz)
|
||||
0x09, 0x36, // USAGE (Slider)
|
||||
0x09, 0x36, // USAGE (Slider)
|
||||
0x15, 0x81, // LOGICAL_MINIMUM (-127)
|
||||
0x25, 0x7f, // LOGICAL_MAXIMUM (127)
|
||||
0x75, 0x08, // REPORT_SIZE (8)
|
||||
0x95, 0x08, // REPORT_COUNT (8)
|
||||
0x81, 0x02, // INPUT (Data,Var,Abs)
|
||||
0xc0, // END_COLLECTION
|
||||
0xc0 // END_COLLECTION
|
||||
};
|
||||
|
||||
|
||||
/** @defgroup USBD_HID_Private_Variables
|
||||
* @{
|
||||
*/
|
||||
|
||||
const USBD_Class_cb_TypeDef USBD_HID_cb =
|
||||
{
|
||||
USBD_HID_Init,
|
||||
USBD_HID_DeInit,
|
||||
USBD_HID_Setup,
|
||||
NULL, /*EP0_TxSent*/
|
||||
NULL, /*EP0_RxReady*/
|
||||
USBD_HID_DataIn, /*DataIn*/
|
||||
NULL, /*DataOut*/
|
||||
NULL, /*SOF */
|
||||
NULL,
|
||||
NULL,
|
||||
USBD_HID_GetCfgDesc,
|
||||
#ifdef USB_OTG_HS_CORE
|
||||
USBD_HID_GetCfgDesc, /* use same config as per FS */
|
||||
#endif
|
||||
};
|
||||
|
||||
#ifdef USB_OTG_HS_INTERNAL_DMA_ENABLED
|
||||
#if defined ( __ICCARM__ ) /*!< IAR Compiler */
|
||||
#pragma data_alignment=4
|
||||
#endif
|
||||
#endif /* USB_OTG_HS_INTERNAL_DMA_ENABLED */
|
||||
__ALIGN_BEGIN static uint32_t USBD_HID_AltSet __ALIGN_END = 0;
|
||||
|
||||
#ifdef USB_OTG_HS_INTERNAL_DMA_ENABLED
|
||||
#if defined ( __ICCARM__ ) /*!< IAR Compiler */
|
||||
#pragma data_alignment=4
|
||||
#endif
|
||||
#endif /* USB_OTG_HS_INTERNAL_DMA_ENABLED */
|
||||
__ALIGN_BEGIN static uint32_t USBD_HID_Protocol __ALIGN_END = 0;
|
||||
|
||||
#ifdef USB_OTG_HS_INTERNAL_DMA_ENABLED
|
||||
#if defined ( __ICCARM__ ) /*!< IAR Compiler */
|
||||
#pragma data_alignment=4
|
||||
#endif
|
||||
#endif /* USB_OTG_HS_INTERNAL_DMA_ENABLED */
|
||||
__ALIGN_BEGIN static uint32_t USBD_HID_IdleState __ALIGN_END = 0;
|
||||
|
||||
#ifdef USB_OTG_HS_INTERNAL_DMA_ENABLED
|
||||
#if defined ( __ICCARM__ ) /*!< IAR Compiler */
|
||||
#pragma data_alignment=4
|
||||
#endif
|
||||
#endif /* USB_OTG_HS_INTERNAL_DMA_ENABLED */
|
||||
/* USB HID device Configuration Descriptor */
|
||||
__ALIGN_BEGIN static const uint8_t USBD_HID_CfgDesc[USB_HID_CONFIG_DESC_SIZ] __ALIGN_END =
|
||||
{
|
||||
0x09, /* bLength: Configuration Descriptor size */
|
||||
USB_CONFIGURATION_DESCRIPTOR_TYPE, /* bDescriptorType: Configuration */
|
||||
USB_HID_CONFIG_DESC_SIZ,
|
||||
/* wTotalLength: Bytes returned */
|
||||
0x00,
|
||||
0x01, /*bNumInterfaces: 1 interface*/
|
||||
0x01, /*bConfigurationValue: Configuration value*/
|
||||
0x00, /*iConfiguration: Index of string descriptor describing
|
||||
the configuration*/
|
||||
0xE0, /*bmAttributes: bus powered and Support Remote Wake-up */
|
||||
0x32, /*MaxPower 100 mA: this current is used for detecting Vbus*/
|
||||
|
||||
/************** Descriptor of Joystick Mouse interface ****************/
|
||||
/* 09 */
|
||||
0x09, /*bLength: Interface Descriptor size*/
|
||||
USB_INTERFACE_DESCRIPTOR_TYPE,/*bDescriptorType: Interface descriptor type*/
|
||||
0x00, /*bInterfaceNumber: Number of Interface*/
|
||||
0x00, /*bAlternateSetting: Alternate setting*/
|
||||
0x01, /*bNumEndpoints*/
|
||||
0x03, /*bInterfaceClass: HID*/
|
||||
0x00 /*0x01*/, /*bInterfaceSubClass : 1=BOOT, 0=no boot*/
|
||||
0x00 /*0x02*/, /*nInterfaceProtocol : 0=none, 1=keyboard, 2=mouse*/
|
||||
0, /*iInterface: Index of string descriptor*/
|
||||
/******************** Descriptor of Joystick Mouse HID ********************/
|
||||
/* 18 */
|
||||
0x09, /*bLength: HID Descriptor size*/
|
||||
HID_DESCRIPTOR_TYPE, /*bDescriptorType: HID*/
|
||||
0x11, /*bcdHID: HID Class Spec release number*/
|
||||
0x01,
|
||||
0x00, /*bCountryCode: Hardware target country*/
|
||||
0x01, /*bNumDescriptors: Number of HID class descriptors to follow*/
|
||||
0x22, /*bDescriptorType*/
|
||||
sizeof(HID_JOYSTICK_ReportDesc),/*wItemLength: Total length of Report descriptor*/
|
||||
0x00,
|
||||
/******************** Descriptor of Mouse endpoint ********************/
|
||||
/* 27 */
|
||||
0x07, /*bLength: Endpoint Descriptor size*/
|
||||
USB_ENDPOINT_DESCRIPTOR_TYPE, /*bDescriptorType:*/
|
||||
|
||||
HID_IN_EP, /*bEndpointAddress: Endpoint Address (IN)*/
|
||||
0x03, /*bmAttributes: Interrupt endpoint*/
|
||||
HID_IN_PACKET, /*wMaxPacketSize: 4 Byte max */
|
||||
0x00,
|
||||
0x0A, /*bInterval: Polling Interval (10 ms)*/
|
||||
/* 34 */
|
||||
} ;
|
||||
|
||||
|
||||
|
||||
static uint8_t ReportSent;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_HID_Private_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief USBD_HID_Init
|
||||
* Initialize the HID interface
|
||||
* @param pdev: device instance
|
||||
* @param cfgidx: Configuration index
|
||||
* @retval status
|
||||
*/
|
||||
static uint8_t USBD_HID_Init (void *pdev,
|
||||
uint8_t cfgidx)
|
||||
{
|
||||
|
||||
/* Open EP IN */
|
||||
DCD_EP_Open(pdev,
|
||||
HID_IN_EP,
|
||||
HID_IN_PACKET,
|
||||
USB_OTG_EP_INT);
|
||||
|
||||
/* Open EP OUT */
|
||||
DCD_EP_Open(pdev,
|
||||
HID_OUT_EP,
|
||||
HID_OUT_PACKET,
|
||||
USB_OTG_EP_INT);
|
||||
|
||||
ReportSent = 1;
|
||||
return USBD_OK;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief USBD_HID_Init
|
||||
* DeInitialize the HID layer
|
||||
* @param pdev: device instance
|
||||
* @param cfgidx: Configuration index
|
||||
* @retval status
|
||||
*/
|
||||
static uint8_t USBD_HID_DeInit (void *pdev,
|
||||
uint8_t cfgidx)
|
||||
{
|
||||
/* Close HID EPs */
|
||||
DCD_EP_Close (pdev , HID_IN_EP);
|
||||
DCD_EP_Close (pdev , HID_OUT_EP);
|
||||
|
||||
ReportSent = 1;
|
||||
return USBD_OK;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief USBD_HID_Setup
|
||||
* Handle the HID specific requests
|
||||
* @param pdev: instance
|
||||
* @param req: usb requests
|
||||
* @retval status
|
||||
*/
|
||||
static uint8_t USBD_HID_Setup (void *pdev,
|
||||
USB_SETUP_REQ *req)
|
||||
{
|
||||
uint16_t len = 0;
|
||||
const uint8_t *pbuf = NULL;
|
||||
|
||||
switch (req->bmRequest & USB_REQ_TYPE_MASK)
|
||||
{
|
||||
case USB_REQ_TYPE_CLASS :
|
||||
switch (req->bRequest)
|
||||
{
|
||||
|
||||
|
||||
case HID_REQ_SET_PROTOCOL:
|
||||
USBD_HID_Protocol = (uint8_t)(req->wValue);
|
||||
break;
|
||||
|
||||
case HID_REQ_GET_PROTOCOL:
|
||||
USBD_CtlSendData (pdev,
|
||||
(uint8_t *)&USBD_HID_Protocol,
|
||||
1);
|
||||
break;
|
||||
|
||||
case HID_REQ_SET_IDLE:
|
||||
USBD_HID_IdleState = (uint8_t)(req->wValue >> 8);
|
||||
break;
|
||||
|
||||
case HID_REQ_GET_IDLE:
|
||||
USBD_CtlSendData (pdev,
|
||||
(uint8_t *)&USBD_HID_IdleState,
|
||||
1);
|
||||
break;
|
||||
|
||||
default:
|
||||
USBD_CtlError (pdev, req);
|
||||
return USBD_FAIL;
|
||||
}
|
||||
break;
|
||||
|
||||
case USB_REQ_TYPE_STANDARD:
|
||||
switch (req->bRequest)
|
||||
{
|
||||
case USB_REQ_GET_DESCRIPTOR:
|
||||
if( req->wValue >> 8 == HID_REPORT_DESC)
|
||||
{
|
||||
len = MIN(sizeof(HID_JOYSTICK_ReportDesc) , req->wLength);
|
||||
pbuf = HID_JOYSTICK_ReportDesc; // wiiccReportDescriptor; //
|
||||
}
|
||||
else if( req->wValue >> 8 == HID_DESCRIPTOR_TYPE)
|
||||
{
|
||||
|
||||
#ifdef USB_OTG_HS_INTERNAL_DMA_ENABLED
|
||||
pbuf = USBD_HID_Desc;
|
||||
#else
|
||||
pbuf = USBD_HID_CfgDesc + 0x12;
|
||||
#endif
|
||||
len = MIN(USB_HID_DESC_SIZ , req->wLength);
|
||||
}
|
||||
|
||||
USBD_CtlSendData (pdev,
|
||||
pbuf,
|
||||
len);
|
||||
|
||||
break;
|
||||
|
||||
case USB_REQ_GET_INTERFACE :
|
||||
USBD_CtlSendData (pdev,
|
||||
(uint8_t *)&USBD_HID_AltSet,
|
||||
1);
|
||||
break;
|
||||
|
||||
case USB_REQ_SET_INTERFACE :
|
||||
USBD_HID_AltSet = (uint8_t)(req->wValue);
|
||||
break;
|
||||
}
|
||||
}
|
||||
return USBD_OK;
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @brief USBD_HID_SendReport
|
||||
* Send HID Report
|
||||
* @param pdev: device instance
|
||||
* @param buff: pointer to report
|
||||
* @retval status
|
||||
*/
|
||||
uint8_t USBD_HID_SendReport (USB_OTG_CORE_HANDLE *pdev,
|
||||
uint8_t *report,
|
||||
uint16_t len)
|
||||
{
|
||||
if (pdev->dev.device_status == USB_OTG_CONFIGURED )
|
||||
{
|
||||
if ( ReportSent )
|
||||
{
|
||||
ReportSent = 0;
|
||||
DCD_EP_Tx (pdev, HID_IN_EP, report, len);
|
||||
}
|
||||
}
|
||||
return USBD_OK;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief USBD_HID_GetCfgDesc
|
||||
* return configuration descriptor
|
||||
* @param speed : current device speed
|
||||
* @param length : pointer data length
|
||||
* @retval pointer to descriptor buffer
|
||||
*/
|
||||
static const uint8_t *USBD_HID_GetCfgDesc (uint8_t speed, uint16_t *length)
|
||||
{
|
||||
*length = sizeof (USBD_HID_CfgDesc);
|
||||
return USBD_HID_CfgDesc;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief USBD_HID_DataIn
|
||||
* handle data IN Stage
|
||||
* @param pdev: device instance
|
||||
* @param epnum: endpoint index
|
||||
* @retval status
|
||||
*/
|
||||
static uint8_t USBD_HID_DataIn (void *pdev,
|
||||
uint8_t epnum)
|
||||
{
|
||||
ReportSent = 1;
|
||||
/* Ensure that the FIFO is empty before a new transfer, this condition could
|
||||
be caused by a new transfer before the end of the previous transfer */
|
||||
DCD_EP_Flush(pdev, HID_IN_EP);
|
||||
return USBD_OK;
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -21,7 +21,7 @@
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "../../opentx.h"
|
||||
#include "../../thirdparty/FatFs/diskio.h"
|
||||
#include "board_horus.h"
|
||||
#include "board.h"
|
||||
#include "sdio_sd.h"
|
||||
|
||||
#if defined(__cplusplus) && !defined(SIMU)
|
||||
|
||||
@@ -5,11 +5,11 @@ set(MCU atmega2560)
|
||||
string(TOLOWER ${PCB} FLAVOUR)
|
||||
set(EEPROM EEPROM_RLC)
|
||||
add_definitions(-DEEPROM_VARIANT=0)
|
||||
set(GUI_DIR 9x)
|
||||
set(GUI_DIR 128x64)
|
||||
set(TARGET_DIR mega2560)
|
||||
set(FIRMWARE_DEPENDENCIES ${FIRMWARE_DEPENDENCIES} 9x_bitmaps)
|
||||
add_definitions(-DPCB${PCB} -DCPUM2560 -DROTARY_ENCODERS=2)
|
||||
set(TARGET_SRC ${TARGET_SRC} board_mega2560.cpp)
|
||||
set(TARGET_SRC ${TARGET_SRC} board.cpp)
|
||||
set(GUI_SRC ${GUI_SRC} ${9X_GUI_SRC})
|
||||
set(FIRMWARE_SRC ${FIRMWARE_SRC} targets/9x/lcd_driver.cpp)
|
||||
if(PWRMANAGE)
|
||||
|
||||
@@ -16,6 +16,7 @@
|
||||
|
||||
#include "opentxsimulator.h"
|
||||
#include "opentx.h"
|
||||
#include "simulcd.h"
|
||||
|
||||
int16_t g_anas[NUM_STICKS+NUM_POTS];
|
||||
|
||||
|
||||
@@ -21,8 +21,6 @@
|
||||
#ifndef _SIMPGMSPACE_H_
|
||||
#define _SIMPGMSPACE_H_
|
||||
|
||||
extern int g_snapshot_idx;
|
||||
|
||||
#ifndef __GNUC__
|
||||
#include <windows.h>
|
||||
#define sleep(x) Sleep(x)
|
||||
|
||||
@@ -0,0 +1,28 @@
|
||||
/*
|
||||
* Copyright (C) OpenTX
|
||||
*
|
||||
* Based on code named
|
||||
* th9x - http://code.google.com/p/th9x
|
||||
* er9x - http://code.google.com/p/er9x
|
||||
* gruvin9x - http://code.google.com/p/gruvin9x
|
||||
*
|
||||
* License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#ifndef _SIMULCD_H_
|
||||
#define _SIMULCD_H_
|
||||
|
||||
extern int g_snapshot_idx;
|
||||
extern bool simuLcdRefresh;
|
||||
extern display_t simuLcdBuf[DISPLAY_BUFFER_SIZE];
|
||||
|
||||
#endif // _SIMULCD_H_
|
||||
@@ -35,13 +35,13 @@ set(MCU cortex-m3)
|
||||
set(SDCARD YES)
|
||||
set(HAPTIC YES)
|
||||
set(EEPROM EEPROM_RAW)
|
||||
set(GUI_DIR 9x)
|
||||
set(GUI_DIR 128x64)
|
||||
set(TARGET_DIR sky9x)
|
||||
set(FIRMWARE_DEPENDENCIES ${FIRMWARE_DEPENDENCIES} 9x_bitmaps)
|
||||
add_definitions(-DPCBSKY9X -DPPM_PIN_SERIAL)
|
||||
add_definitions(-DAUDIO -DVOICE -DRTCLOCK -DVARIO)
|
||||
add_definitions(-DEEPROM_VARIANT=0)
|
||||
set(GUI_SRC ${GUI_SRC} ${9X_GUI_SRC} menu_general_hardware.cpp view_telemetry.cpp view_text.cpp view_about.cpp)
|
||||
set(GUI_SRC ${GUI_SRC} ${9X_GUI_SRC} radio_hardware.cpp view_telemetry.cpp view_text.cpp view_about.cpp)
|
||||
set(FIRMWARE_TARGET_SRC ${FIRMWARE_TARGET_SRC} core_cm3.c board_lowlevel.c crt.c vectors_sam3s.c)
|
||||
set(FIRMWARE_TARGET_SRC ${FIRMWARE_TARGET_SRC} lcd_driver.cpp pwr_driver.cpp
|
||||
usb/device/core/USBD_UDP.c usb/device/core/USBDDriver.c
|
||||
@@ -53,7 +53,7 @@ set(FIRMWARE_TARGET_SRC ${FIRMWARE_TARGET_SRC} lcd_driver.cpp pwr_driver.cpp
|
||||
)
|
||||
set(TARGET_SRC
|
||||
${TARGET_SRC}
|
||||
board_sky9x.cpp
|
||||
board.cpp
|
||||
telemetry_driver.cpp
|
||||
serial2_driver.cpp
|
||||
adc_driver.cpp
|
||||
|
||||
@@ -25,7 +25,7 @@
|
||||
#include <string.h>
|
||||
#include "debug.h"
|
||||
#include "diskio.h"
|
||||
#include "board.h"
|
||||
#include "board_lowlevel.h"
|
||||
#include "Media.h"
|
||||
|
||||
//------------------------------------------------------------------------------
|
||||
|
||||
+285
-609
@@ -1,637 +1,313 @@
|
||||
/*
|
||||
* Copyright (C) OpenTX
|
||||
*
|
||||
* Based on code named
|
||||
* th9x - http://code.google.com/p/th9x
|
||||
* er9x - http://code.google.com/p/er9x
|
||||
* gruvin9x - http://code.google.com/p/gruvin9x
|
||||
*
|
||||
* License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
// TODO merge this file with board_sky9x.h
|
||||
/*
|
||||
* Copyright (C) OpenTX
|
||||
*
|
||||
* Based on code named
|
||||
* th9x - http://code.google.com/p/th9x
|
||||
* er9x - http://code.google.com/p/er9x
|
||||
* gruvin9x - http://code.google.com/p/gruvin9x
|
||||
*
|
||||
* License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#ifndef _BOARD_H_
|
||||
#define _BOARD_H_
|
||||
#ifndef _BOARD_SKY9X_H_
|
||||
#define _BOARD_SKY9X_H_
|
||||
|
||||
#include <stdint.h>
|
||||
#include <stdio.h>
|
||||
#include "board_lowlevel.h"
|
||||
#include "audio_driver.h"
|
||||
|
||||
#include "chip.h"
|
||||
extern uint16_t ResetReason;
|
||||
|
||||
#define BOOTLOADER_SIZE 0x8000
|
||||
#define FIRMWARE_SIZE (256*1024)
|
||||
#define FIRMWARE_ADDRESS 0x00400000
|
||||
|
||||
// Board driver
|
||||
void boardInit(void);
|
||||
#define boardOff() pwrOff()
|
||||
|
||||
// Keys
|
||||
#if defined(REVA)
|
||||
#include "AT91SAM3S2.h"
|
||||
#define KEYS_GPIO_REG_MENU PIOB->PIO_PDSR
|
||||
#define KEYS_GPIO_REG_EXIT PIOA->PIO_PDSR
|
||||
#define KEYS_GPIO_REG_UP PIOC->PIO_PDSR
|
||||
#define KEYS_GPIO_REG_DOWN PIOC->PIO_PDSR
|
||||
#define KEYS_GPIO_REG_RIGHT PIOC->PIO_PDSR
|
||||
#define KEYS_GPIO_REG_LEFT PIOC->PIO_PDSR
|
||||
#define KEYS_GPIO_PIN_MENU 0x00000040
|
||||
#define KEYS_GPIO_PIN_EXIT 0x80000000
|
||||
#define KEYS_GPIO_PIN_UP 0x00000004
|
||||
#define KEYS_GPIO_PIN_DOWN 0x00000008
|
||||
#define KEYS_GPIO_PIN_RIGHT 0x00000010
|
||||
#define KEYS_GPIO_PIN_LEFT 0x00000020
|
||||
#else
|
||||
#include "AT91SAM3S4.h"
|
||||
#define KEYS_GPIO_REG_MENU PIOB->PIO_PDSR
|
||||
#define KEYS_GPIO_REG_EXIT PIOC->PIO_PDSR
|
||||
#define KEYS_GPIO_REG_UP PIOC->PIO_PDSR
|
||||
#define KEYS_GPIO_REG_DOWN PIOC->PIO_PDSR
|
||||
#define KEYS_GPIO_REG_RIGHT PIOC->PIO_PDSR
|
||||
#define KEYS_GPIO_REG_LEFT PIOC->PIO_PDSR
|
||||
#define KEYS_GPIO_PIN_MENU 0x00000020
|
||||
#define KEYS_GPIO_PIN_EXIT 0x01000000
|
||||
#define KEYS_GPIO_PIN_UP 0x00000002
|
||||
#define KEYS_GPIO_PIN_DOWN 0x00000020
|
||||
#define KEYS_GPIO_PIN_RIGHT 0x00000010
|
||||
#define KEYS_GPIO_PIN_LEFT 0x00000008
|
||||
#endif
|
||||
|
||||
#if !defined(SIMU)
|
||||
#include "core_cm3.h"
|
||||
#endif
|
||||
|
||||
//------------------------------------------------------------------------------
|
||||
// Definitions
|
||||
//------------------------------------------------------------------------------
|
||||
|
||||
//------------------------------------------------------------------------------
|
||||
/// \par
|
||||
/// This page lists several definition related to the board description.
|
||||
///
|
||||
/// Definitions
|
||||
/// - BOARD_NAME
|
||||
|
||||
/// Name of the board.
|
||||
#define BOARD_NAME "AT91SAM3S-EK"
|
||||
/// Board definition.
|
||||
#define at91sam3sek
|
||||
/// Family definition (already defined).
|
||||
#define at91sam3s
|
||||
/// Core definition
|
||||
#define cortexm3
|
||||
|
||||
// TODO remove these definitions
|
||||
//#define BOARD_REV_A
|
||||
#define BOARD_REV_B
|
||||
|
||||
//------------------------------------------------------------------------------
|
||||
|
||||
//------------------------------------------------------------------------------
|
||||
/// \par sam3s_ek_opfreq "SAM3S-EK - Operating frequencies"
|
||||
/// This page lists several definition related to the board operating frequency
|
||||
/// (when using the initialization done by board_lowlevel.c).
|
||||
///
|
||||
/// !Definitions
|
||||
/// - BOARD_MAINOSC
|
||||
/// - BOARD_MCK
|
||||
|
||||
/// Frequency of the board main oscillator.
|
||||
#define BOARD_MAINOSC 12000000
|
||||
|
||||
/// Master clock frequency (when using board_lowlevel.c).
|
||||
// #define BOARD_MCK 64000000
|
||||
|
||||
//------------------------------------------------------------------------------
|
||||
// ADC
|
||||
//------------------------------------------------------------------------------
|
||||
|
||||
/// Startup time max, return from Idle mode (in �s)
|
||||
#define ADC_STARTUP_TIME_MAX 15
|
||||
/// Track and hold Acquisition Time min (in ns)
|
||||
#define ADC_TRACK_HOLD_TIME_MIN 1200
|
||||
|
||||
//------------------------------------------------------------------------------
|
||||
|
||||
//------------------------------------------------------------------------------
|
||||
/// USB attributes configuration descriptor (bus or self powered, remote wakeup)
|
||||
//#define BOARD_USB_BMATTRIBUTES USBConfigurationDescriptor_SELFPOWERED_RWAKEUP
|
||||
#define BOARD_USB_BMATTRIBUTES USBConfigurationDescriptor_SELFPOWERED_NORWAKEUP
|
||||
//------------------------------------------------------------------------------
|
||||
|
||||
//------------------------------------------------------------------------------
|
||||
/// \par sam3s_ek_piodef "SAM3S-EK - PIO definitions"
|
||||
/// This pages lists all the pio definitions contained in board.h. The constants
|
||||
/// are named using the following convention: PIN_* for a constant which defines
|
||||
/// a single Pin instance (but may include several PIOs sharing the same
|
||||
/// controller), and PINS_* for a list of Pin instances.
|
||||
///
|
||||
/// !ADC
|
||||
/// - PIN_ADC0_AD0
|
||||
/// - PIN_ADC0_AD1
|
||||
/// - PIN_ADC0_AD2
|
||||
/// - PIN_ADC0_AD3
|
||||
/// - PIN_ADC0_AD4
|
||||
/// - PIN_ADC0_AD5
|
||||
/// - PIN_ADC0_AD6
|
||||
/// - PIN_ADC0_AD7
|
||||
/// - PINS_ADC0
|
||||
///
|
||||
/// !UART
|
||||
/// - PINS_UART
|
||||
///
|
||||
/// !EBI
|
||||
/// - PIN_EBI_DATA_BUS
|
||||
/// - PIN_EBI_NCS0
|
||||
/// - PIN_EBI_NRD
|
||||
/// - PIN_EBI_NWE
|
||||
/// - PIN_EBI_ADDR_BUS
|
||||
/// - PIN_EBI_PSRAM_NBS
|
||||
/// - PIN_EBI_A1
|
||||
/// - PIN_EBI_LCD_RS
|
||||
///
|
||||
/// !LEDs
|
||||
/// - PIN_LED_0
|
||||
/// - PIN_LED_1
|
||||
/// - PIN_LED_2
|
||||
/// - PINS_LEDS
|
||||
///
|
||||
/// !MCI
|
||||
/// - PINS_MCI
|
||||
///
|
||||
/// !Push buttons
|
||||
/// - PIN_PUSHBUTTON_1
|
||||
/// - PIN_PUSHBUTTON_2
|
||||
/// - PINS_PUSHBUTTONS
|
||||
/// - PUSHBUTTON_BP1
|
||||
/// - PUSHBUTTON_BP2
|
||||
///
|
||||
/// !PWMC
|
||||
/// - PIN_PWMC_PWMH0
|
||||
/// - PIN_PWMC_PWML0
|
||||
/// - PIN_PWMC_PWMH1
|
||||
/// - PIN_PWMC_PWML1
|
||||
/// - PIN_PWMC_PWMH2
|
||||
/// - PIN_PWMC_PWML2
|
||||
/// - PIN_PWMC_PWMH3
|
||||
/// - PIN_PWMC_PWML3
|
||||
/// - PIN_PWM_LED0
|
||||
/// - PIN_PWM_LED1
|
||||
/// - PIN_PWM_LED2
|
||||
/// - CHANNEL_PWM_LED0
|
||||
/// - CHANNEL_PWM_LED1
|
||||
/// - CHANNEL_PWM_LED2
|
||||
///
|
||||
/// !SPI
|
||||
/// - PIN_SPI_MISO
|
||||
/// - PIN_SPI_MOSI
|
||||
/// - PIN_SPI_SPCK
|
||||
/// - PINS_SPI
|
||||
/// - PIN_SPI_NPCS0_PA11
|
||||
///
|
||||
/// ! SSC
|
||||
/// - PIN_SSC_TD
|
||||
/// - PIN_SSC_TK
|
||||
/// - PIN_SSC_TF
|
||||
/// - PINS_SSC_CODEC
|
||||
///
|
||||
/// ! PCK0
|
||||
/// - PIN_PCK0
|
||||
///
|
||||
/// !TWI
|
||||
/// - PIN_TWI_TWD0
|
||||
/// - PIN_TWI_TWCK0
|
||||
/// - PINS_TWI
|
||||
///
|
||||
/// !USART0
|
||||
/// - PIN_USART0_RXD
|
||||
/// - PIN_USART0_TXD
|
||||
/// - PIN_USART0_CTS
|
||||
/// - PIN_USART0_RTS
|
||||
/// - PIN_USART0_SCK
|
||||
///
|
||||
/// !USB
|
||||
/// - PIN_USB_PULLUP
|
||||
///
|
||||
|
||||
/// ADC_AD0 pin definition.
|
||||
#define PIN_ADC0_AD0 {1 << 21, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}
|
||||
/// ADC_AD1 pin definition.
|
||||
#define PIN_ADC0_AD1 {1 << 30, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}
|
||||
/// ADC_AD2 pin definition.
|
||||
#define PIN_ADC0_AD2 {1 << 3, PIOB, ID_PIOB, PIO_INPUT, PIO_DEFAULT}
|
||||
/// ADC_AD3 pin definition.
|
||||
#define PIN_ADC0_AD3 {1 << 4, PIOB, ID_PIOB, PIO_INPUT, PIO_DEFAULT}
|
||||
/// ADC_AD4 pin definition.
|
||||
#define PIN_ADC0_AD4 {1 << 15, PIOC, ID_PIOC, PIO_INPUT, PIO_DEFAULT}
|
||||
/// ADC_AD5 pin definition.
|
||||
#define PIN_ADC0_AD5 {1 << 16, PIOC, ID_PIOC, PIO_INPUT, PIO_DEFAULT}
|
||||
/// ADC_AD6 pin definition.
|
||||
#define PIN_ADC0_AD6 {1 << 17, PIOC, ID_PIOC, PIO_INPUT, PIO_DEFAULT}
|
||||
/// ADC_AD7 pin definition.
|
||||
#define PIN_ADC0_AD7 {1 << 18, PIOC, ID_PIOC, PIO_INPUT, PIO_DEFAULT}
|
||||
|
||||
/// Pins ADC
|
||||
#define PINS_ADC PIN_ADC0_AD0, PIN_ADC0_AD1, PIN_ADC0_AD2, PIN_ADC0_AD3, PIN_ADC0_AD4, PIN_ADC0_AD5, PIN_ADC0_AD6, PIN_ADC0_AD7
|
||||
|
||||
/** UART pins (UTXD0 and URXD0) definitions, PA9,10. */
|
||||
#define PINS_UART {0x00000600, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
|
||||
/// EBI
|
||||
#define PIN_EBI_DATA_BUS {0xFF, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_PULLUP}
|
||||
#define PIN_EBI_NRD {1 << 11, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_PULLUP}
|
||||
#define PIN_EBI_NWE {1 << 8, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_PULLUP}
|
||||
|
||||
#define PIN_EBI_NCS0 {1 << 20, PIOB, ID_PIOB, PIO_PERIPH_A, PIO_PULLUP}
|
||||
#define PIN_EBI_PSRAM_ADDR_BUS {0x3f00fff, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_PULLUP}
|
||||
#define PIN_EBI_PSRAM_NBS {1 << 7, PIOB, ID_PIOB, PIO_PERIPH_B, PIO_PULLUP}, \
|
||||
{1 << 15, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_PULLUP}
|
||||
#define PIN_EBI_A1 {1 << 19, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_PULLUP}
|
||||
|
||||
#define PIN_EBI_NCS1 {1 << 15, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_PULLUP} /* LCD CS pin */
|
||||
#define PIN_EBI_LCD_RS {1 << 19, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_PULLUP} /* LCD RS pin */
|
||||
|
||||
#ifdef BOARD_REV_A
|
||||
/** LED #0 pin definition. */
|
||||
#define PIN_LED_0 {1 << 20, PIOC, ID_PIOC, PIO_OUTPUT_1, PIO_DEFAULT}
|
||||
/** LED #1 pin definition. */
|
||||
#define PIN_LED_1 {1 << 21, PIOC, ID_PIOC, PIO_OUTPUT_1, PIO_DEFAULT}
|
||||
/** LED #2 pin definition. */
|
||||
#define PIN_LED_2 {1 << 22, PIOC, ID_PIOC, PIO_OUTPUT_1, PIO_DEFAULT}
|
||||
#endif
|
||||
#ifdef BOARD_REV_B
|
||||
/** LED #0 pin definition. */
|
||||
#define PIN_LED_0 {1 << 19, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
|
||||
/** LED #1 pin definition. */
|
||||
#define PIN_LED_1 {1 << 20, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
|
||||
/** LED #2 pin definition. */
|
||||
#define PIN_LED_2 {1 << 20, PIOC, ID_PIOC, PIO_OUTPUT_1, PIO_DEFAULT}
|
||||
#endif
|
||||
|
||||
/** List of all LEDs definitions. */
|
||||
#define PINS_LEDS PIN_LED_0, PIN_LED_1, PIN_LED_2
|
||||
|
||||
/** MCI pins definition. */
|
||||
#define PINS_MCI {0x3fUL << 26, PIOA, ID_PIOA, PIO_PERIPH_C, PIO_PULLUP}
|
||||
/** MCI pin Card Detect. */
|
||||
#define PIN_MCI_CD {PIO_PB7, PIOB, ID_PIOB, PIO_INPUT, PIO_PULLUP}
|
||||
|
||||
/** Push button #0 definition. Attributes = pull-up + debounce + interrupt on rising edge. */
|
||||
#define PIN_PUSHBUTTON_1 {1 << 3, PIOB, ID_PIOB, PIO_INPUT, PIO_PULLUP | PIO_DEBOUNCE}
|
||||
/** Push button #1 definition. Attributes = pull-up + debounce + interrupt on falling edge. */
|
||||
#define PIN_PUSHBUTTON_2 {1 << 12, PIOC, ID_PIOC, PIO_INPUT, PIO_PULLUP | PIO_DEBOUNCE}
|
||||
/** List of all push button definitions. */
|
||||
#define PINS_PUSHBUTTONS PIN_PUSHBUTTON_1, PIN_PUSHBUTTON_2
|
||||
|
||||
/** Push button #1 index. */
|
||||
#define PUSHBUTTON_BP1 0
|
||||
/** Push button #2 index. */
|
||||
#define PUSHBUTTON_BP2 1
|
||||
|
||||
/// Simulated joystick LEFT index.
|
||||
#define JOYSTICK_LEFT 0
|
||||
/// Simulated joystick RIGHT index.
|
||||
#define JOYSTICK_RIGHT 1
|
||||
|
||||
/** PWMC PWM0 pin definition. */
|
||||
#define PIN_PWMC_PWMH0 {1 << 18, PIOC, ID_PIOC, PIO_PERIPH_B, PIO_DEFAULT}
|
||||
#define PIN_PWMC_PWML0 {1 << 19, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
|
||||
/** PWMC PWM1 pin definition. */
|
||||
#define PIN_PWMC_PWMH1 {1 << 19, PIOC, ID_PIOC, PIO_PERIPH_B, PIO_DEFAULT}
|
||||
#define PIN_PWMC_PWML1 {1 << 20, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
|
||||
/** PWMC PWM2 pin definition. */
|
||||
#define PIN_PWMC_PWMH2 {1 << 20, PIOC, ID_PIOC, PIO_PERIPH_B, PIO_DEFAULT}
|
||||
#define PIN_PWMC_PWML2 {1 << 16, PIOA, ID_PIOA, PIO_PERIPH_C, PIO_DEFAULT}
|
||||
/** PWMC PWM3 pin definition. */
|
||||
#define PIN_PWMC_PWMH3 {1 << 21, PIOC, ID_PIOC, PIO_PERIPH_B, PIO_DEFAULT}
|
||||
#define PIN_PWMC_PWML3 {1 << 15, PIOA, ID_PIOA, PIO_PERIPH_C, PIO_DEFAULT}
|
||||
/** PWM pin definition for LED0 */
|
||||
#define PIN_PWM_LED0 PIN_PWMC_PWMH0, PIN_PWMC_PWML0
|
||||
/** PWM pin definition for LED1 */
|
||||
#define PIN_PWM_LED1 PIN_PWMC_PWMH2, PIN_PWMC_PWML2
|
||||
/** PWM pin definition for LED2 */
|
||||
#define PIN_PWM_LED2 PIN_PWMC_PWMH3, PIN_PWMC_PWML3
|
||||
/** PWM channel for LED0 */
|
||||
#define CHANNEL_PWM_LED0 0
|
||||
/** PWM channel for LED1 */
|
||||
#define CHANNEL_PWM_LED1 2
|
||||
/** PWM channel for LED2 */
|
||||
#define CHANNEL_PWM_LED2 3
|
||||
|
||||
/** SPI MISO pin definition. */
|
||||
#define PIN_SPI_MISO {1 << 12, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
/** SPI MOSI pin definition. */
|
||||
#define PIN_SPI_MOSI {1 << 13, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
/** SPI SPCK pin definition. */
|
||||
#define PIN_SPI_SPCK {1 << 14, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
/** SPI chip select pin definition. */
|
||||
#define PIN_SPI_NPCS0_PA11 {1 << 11, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
/** List of SPI pin definitions (MISO, MOSI & SPCK). */
|
||||
#define PINS_SPI PIN_SPI_MISO, PIN_SPI_MOSI, PIN_SPI_SPCK
|
||||
|
||||
/// SSC pins definition.
|
||||
#define PIN_SSC_TD {0x1 << 26, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
#define PIN_SSC_TK {0x1 << 28, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
#define PIN_SSC_TF {0x1 << 30, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
#define PINS_SSC_CODEC PIN_SSC_TD, PIN_SSC_TK, PIN_SSC_TF
|
||||
|
||||
/// PCK0
|
||||
#define PIN_PCK0 {0x1 << 21, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
|
||||
|
||||
/// TWI pins definition.
|
||||
#define TWI_V3XX
|
||||
#define PIN_TWI_TWD0 {0x1 << 9, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
#define PIN_TWI_TWCK0 {0x1 << 10, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
#define PINS_TWI0 PIN_TWI_TWD0, PIN_TWI_TWCK0
|
||||
#define PIN_TWI_TWD1 {0x1 << 24, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
#define PIN_TWI_TWCK1 {0x1 << 25, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
#define PINS_TWI1 PIN_TWI_TWD1, PIN_TWI_TWCK1
|
||||
|
||||
/// USART0
|
||||
#define PIN_USART0_RXD {0x1 << 19, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
#define PIN_USART0_TXD {0x1 << 18, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
#define PIN_USART0_CTS {0x1 << 8, PIOB, ID_PIOB, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
#define PIN_USART0_RTS {0x1 << 7, PIOB, ID_PIOB, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
#define PIN_USART0_SCK {0x1 << 17, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
|
||||
/// USART1
|
||||
#define PIN_USART1_RXD {0x1 << 21, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
#define PIN_USART1_TXD {0x1 << 22, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
#define PIN_USART1_CTS {0x1 << 25, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
#define PIN_USART1_RTS {0x1 << 24, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
#define PIN_USART1_EN {0x1 << 23, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
|
||||
|
||||
/// USB VBus monitoring pin definition.
|
||||
#ifdef BOARD_REV_A
|
||||
#define PIN_USB_VBUS {1 << 23, PIOC, ID_PIOC, PIO_INPUT, PIO_DEFAULT}
|
||||
#endif
|
||||
#ifdef BOARD_REV_B
|
||||
#define PIN_USB_VBUS {1 << 21, PIOC, ID_PIOC, PIO_INPUT, PIO_DEFAULT}
|
||||
#endif
|
||||
|
||||
#define usbPlugged() (PIOC->PIO_PDSR & PIO_PC25)
|
||||
|
||||
//------------------------------------------------------------------------------
|
||||
|
||||
//------------------------------------------------------------------------------
|
||||
/// \par sam3s_ek_extcomp "SAM3S-EK - External components"
|
||||
/// This page lists the definitions related to external on-board components
|
||||
/// located in the board.h file for the AT91SAM3S-EK.
|
||||
///
|
||||
/// !AT45 Dataflash Card
|
||||
/// - BOARD_AT45_A_SPI_BASE
|
||||
/// - BOARD_AT45_A_SPI_ID
|
||||
/// - BOARD_AT45_A_SPI_PINS
|
||||
/// - BOARD_AT45_A_SPI
|
||||
/// - BOARD_AT45_A_NPCS
|
||||
/// - BOARD_AT45_A_NPCS_PIN
|
||||
///
|
||||
/// !AT45 Dataflash (serial onboard DataFlash)
|
||||
/// - BOARD_AT45_B_SPI_BASE
|
||||
/// - BOARD_AT45_B_SPI_ID
|
||||
/// - BOARD_AT45_B_SPI_PINS
|
||||
/// - BOARD_AT45_B_SPI
|
||||
/// - BOARD_AT45_B_NPCS
|
||||
/// - BOARD_AT45_B_NPCS_PIN
|
||||
///
|
||||
/// !AT26 Serial Flash
|
||||
/// - BOARD_AT26_A_SPI_BASE
|
||||
/// - BOARD_AT26_A_SPI_ID
|
||||
/// - BOARD_AT26_A_SPI_PINS
|
||||
/// - BOARD_AT26_A_SPI
|
||||
/// - BOARD_AT26_A_NPCS
|
||||
/// - BOARD_AT26_A_NPCS_PIN
|
||||
///
|
||||
/// !SD Card
|
||||
/// - MCI2_INTERFACE
|
||||
/// - BOARD_SD_MCI_BASE
|
||||
/// - BOARD_SD_MCI_ID
|
||||
/// - BOARD_SD_PINS
|
||||
/// - BOARD_SD_SLOT
|
||||
///
|
||||
/// !PSRAM
|
||||
/// - BOARD_PSRAM_PINS
|
||||
///
|
||||
/// !LCD
|
||||
/// - BOARD_LCD_ILI9325
|
||||
/// - BOARD_LCD_PINS
|
||||
/// - BOARD_BACKLIGHT_PIN
|
||||
/// - BOARD_LCD_BASE
|
||||
/// - BOARD_LCD_RS
|
||||
/// - BOARD_LCD_WIDTH
|
||||
/// - BOARD_LCD_HEIGHT
|
||||
///
|
||||
/// !TouchScreen
|
||||
/// - BOARD_TSC_ADS7843
|
||||
/// - PIN_TCS_IRQ
|
||||
/// - PIN_TCS_BUSY
|
||||
/// - BOARD_TSC_SPI_BASE
|
||||
/// - BOARD_TSC_SPI_ID
|
||||
/// - BOARD_TSC_SPI_PINS
|
||||
/// - BOARD_TSC_NPCS
|
||||
/// - BOARD_TSC_NPCS_PIN
|
||||
///
|
||||
/// Base address of SPI peripheral connected to the dataflash.
|
||||
//#define BOARD_AT45_A_SPI_BASE SPI0
|
||||
///// Identifier of SPI peripheral connected to the dataflash.
|
||||
//#define BOARD_AT45_A_SPI_ID ID_SPI0
|
||||
///// Pins of the SPI peripheral connected to the dataflash.
|
||||
//#define BOARD_AT45_A_SPI_PINS PINS_SPI0
|
||||
///// Dataflahs SPI number.
|
||||
//#define BOARD_AT45_A_SPI 0
|
||||
///// Chip select connected to the dataflash.
|
||||
//#define BOARD_AT45_A_NPCS 3
|
||||
///// Chip select pin connected to the dataflash.
|
||||
//#define BOARD_AT45_A_NPCS_PIN PIN_SPI0_NPCS3
|
||||
|
||||
/// Base address of SPI peripheral connected to the dataflash.
|
||||
//#define BOARD_AT45_B_SPI_BASE SPI1
|
||||
///// Identifier of SPI peripheral connected to the dataflash.
|
||||
//#define BOARD_AT45_B_SPI_ID ID_SPI1
|
||||
///// Pins of the SPI peripheral connected to the dataflash.
|
||||
//#define BOARD_AT45_B_SPI_PINS PINS_SPI1
|
||||
///// Dataflahs SPI number.
|
||||
//#define BOARD_AT45_B_SPI 1
|
||||
///// Chip select connected to the dataflash.
|
||||
//#define BOARD_AT45_B_NPCS 3
|
||||
///// Chip select pin connected to the dataflash.
|
||||
//#define BOARD_AT45_B_NPCS_PIN PIN_SPI1_NPCS3
|
||||
|
||||
/// Base address of SPI peripheral connected to the serialflash.
|
||||
//#define BOARD_AT26_A_SPI_BASE SPI0
|
||||
///// Identifier of SPI peripheral connected to the serialflash.
|
||||
//#define BOARD_AT26_A_SPI_ID ID_SPI0
|
||||
///// Pins of the SPI peripheral connected to the serialflash.
|
||||
//#define BOARD_AT26_A_SPI_PINS PINS_SPI0
|
||||
///// Serialflash SPI number.
|
||||
//#define BOARD_AT26_A_SPI 0
|
||||
///// Chip select connected to the serialflash.
|
||||
//#define BOARD_AT26_A_NPCS 3
|
||||
///// Chip select pin connected to the serialflash.
|
||||
//#define BOARD_AT26_A_NPCS_PIN PIN_SPI0_NPCS3
|
||||
|
||||
/// ISO7816
|
||||
/// - PIN_SMARTCARD_CONNECT
|
||||
/// - PIN_ISO7816_RSTMC
|
||||
/// - PINS_ISO7816
|
||||
|
||||
/// Smartcard detection pin
|
||||
//#define PIN_SMARTCARD_CONNECT {1 << 5, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}
|
||||
/// PIN used for reset the smartcard
|
||||
//#define PIN_ISO7816_RSTMC {1 << 7, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
|
||||
/// Pins used for connect the smartcard
|
||||
//#define PINS_ISO7816 PIN_USART0_TXD, PIN_USART0_SCK, PIN_ISO7816_RSTMC
|
||||
|
||||
/// Dma channel number
|
||||
#define BOARD_MCI_DMA_CHANNEL 0
|
||||
/// MCI0 DMA hardware handshaking ID
|
||||
#define DMA_HW_SRC_REQ_ID_MCI0 AT91C_HDMA_SRC_PER_0
|
||||
#define DMA_HW_DEST_REQ_ID_MCI0 AT91C_HDMA_DST_PER_0
|
||||
/// MCI1 DMA hardware handshaking ID
|
||||
#define DMA_HW_SRC_REQ_ID_MCI1 AT91C_HDMA_SRC_PER_13
|
||||
#define DMA_HW_DEST_REQ_ID_MCI1 AT91C_HDMA_DST_PER_13
|
||||
/// SD DMA hardware handshaking ID
|
||||
#define BOARD_SD_DMA_HW_SRC_REQ_ID DMA_HW_SRC_REQ_ID_MCI0
|
||||
#define BOARD_SD_DMA_HW_DEST_REQ_ID DMA_HW_DEST_REQ_ID_MCI0
|
||||
|
||||
|
||||
/// HS MCI interface
|
||||
#define MCI2_INTERFACE
|
||||
/// Base address of the MCI peripheral connected to the SD card.
|
||||
#define BOARD_SD_MCI_BASE MCI0//MCI
|
||||
///// Peripheral identifier of the MCI connected to the SD card.
|
||||
#define BOARD_SD_MCI_ID AT91C_ID_MCI0 ID_MCI0 //ID_MCI
|
||||
///// MCI pins that shall be configured to access the SD card.
|
||||
#define BOARD_SD_PINS PINS_MCI
|
||||
///// MCI slot to which the SD card is connected to.
|
||||
#define BOARD_SD_SLOT MCI_SD_SLOTA
|
||||
///// MCI Card Detect pin.
|
||||
#define BOARD_SD_PIN_CD PIN_MCI_CD
|
||||
|
||||
#define SD_CARD_PRESENT() ( (PIOB->PIO_PDSR & PIO_PB7) == 0 )
|
||||
|
||||
// States for initialising card
|
||||
#define SD_ST_ERR -1
|
||||
#define SD_ST_STARTUP 0
|
||||
#define SD_ST_EMPTY 1
|
||||
#define SD_ST_INIT1 2
|
||||
#define SD_ST_INIT2 3
|
||||
#define SD_ST_IDLE 4
|
||||
#define SD_ST_READY 5
|
||||
#define SD_ST_IDENT 6
|
||||
#define SD_ST_STBY 7
|
||||
#define SD_ST_TRAN 8
|
||||
#define SD_ST_DATA 9
|
||||
#define SD_ST_MOUNTED 10
|
||||
|
||||
extern uint32_t Cmd_A41_resp;
|
||||
extern int32_t Card_state;
|
||||
extern volatile uint32_t Card_initialized;
|
||||
extern uint32_t Card_CSD[4];
|
||||
extern uint32_t transSpeed;
|
||||
|
||||
#define OCR_SD_CCS (1UL << 30)
|
||||
|
||||
#define SD_CSD(csd, bitfield, bits) ((csd[3-(bitfield)/32] >> ((bitfield)%32)) & ((1 << (bits)) - 1))
|
||||
|
||||
#define SD_CSD_TRAN_SPEED(pSd) SD_CSD(pSd, 96, 8) ///< Max. data transfer rate
|
||||
|
||||
#define SD_CSD_C_SIZE(pSd) ((SD_CSD(pSd, 72, 2) << 10) + \
|
||||
(SD_CSD(pSd, 64, 8) << 2) + \
|
||||
SD_CSD(pSd, 62, 2)) ///< Device size
|
||||
|
||||
#define SD_CSD_C_SIZE_HC(csd) ((SD_CSD(csd, 64, 6) << 16) + \
|
||||
(SD_CSD(csd, 56, 8) << 8) + \
|
||||
SD_CSD(csd, 48, 8)) ///< Device size v2.0 High Capacity
|
||||
|
||||
#define SD_CSD_C_SIZE_MULT(pSd) SD_CSD(pSd, 47, 3) ///< Device size multiplier
|
||||
|
||||
#define SD_CSD_MULT(pSd) (1 << (SD_CSD_C_SIZE_MULT(pSd) + 2))
|
||||
|
||||
#define SD_CSD_READ_BL_LEN(pSd) SD_CSD(pSd, 80, 4) ///< Max. read data block length
|
||||
|
||||
#define SD_CSD_BLKLEN(pSd) (1 << (SD_CSD_READ_BL_LEN(pSd) - 9))
|
||||
|
||||
#define SD_CSD_BLOCKNR(pSd) ((SD_CSD_C_SIZE(pSd) + 1) * SD_CSD_MULT(pSd)) * SD_CSD_BLKLEN(pSd)
|
||||
|
||||
#define SD_CSD_BLOCKNR_HC(pSd) ((SD_CSD_C_SIZE_HC(pSd) + 1) * 1024)
|
||||
|
||||
#if !defined(SIMU)
|
||||
#define SD_IS_HC() (Cmd_A41_resp & OCR_SD_CCS)
|
||||
#define SD_GET_BLOCKNR() (SD_IS_HC() ? (SD_CSD_BLOCKNR_HC(Card_CSD)) : (SD_CSD_BLOCKNR(Card_CSD)))
|
||||
#define SD_GET_SPEED() (transSpeed)
|
||||
#if defined(REVX)
|
||||
#define TRIMS_GPIO_REG_LHL PIOB->PIO_PDSR
|
||||
#define TRIMS_GPIO_REG_LVD PIOA->PIO_PDSR
|
||||
#define TRIMS_GPIO_REG_RVU PIOC->PIO_PDSR
|
||||
#define TRIMS_GPIO_REG_RHL PIOA->PIO_PDSR
|
||||
#define TRIMS_GPIO_REG_LHR PIOA->PIO_PDSR
|
||||
#define TRIMS_GPIO_REG_LVU PIOC->PIO_PDSR
|
||||
#define TRIMS_GPIO_REG_RVD PIOA->PIO_PDSR
|
||||
#define TRIMS_GPIO_REG_RHR PIOC->PIO_PDSR
|
||||
#else
|
||||
#define SD_IS_HC() (0)
|
||||
#define SD_GET_BLOCKNR() (0)
|
||||
#define SD_GET_SPEED() (0)
|
||||
#define TRIMS_GPIO_REG_LHL PIOA->PIO_PDSR
|
||||
#define TRIMS_GPIO_REG_LVD PIOA->PIO_PDSR
|
||||
#define TRIMS_GPIO_REG_RVU PIOA->PIO_PDSR
|
||||
#define TRIMS_GPIO_REG_RHL PIOA->PIO_PDSR
|
||||
#define TRIMS_GPIO_REG_LHR PIOB->PIO_PDSR
|
||||
#define TRIMS_GPIO_REG_LVU PIOC->PIO_PDSR
|
||||
#define TRIMS_GPIO_REG_RVD PIOC->PIO_PDSR
|
||||
#define TRIMS_GPIO_REG_RHR PIOC->PIO_PDSR
|
||||
#endif
|
||||
|
||||
//------------------------------------------------------------------------------
|
||||
#if defined(REVX)
|
||||
#define TRIMS_GPIO_PIN_LHL 0x00000010
|
||||
#define TRIMS_GPIO_PIN_LVD 0x01000000
|
||||
#define TRIMS_GPIO_PIN_RVU 0x00000400
|
||||
#define TRIMS_GPIO_PIN_RHL 0x00000001
|
||||
#define TRIMS_GPIO_PIN_LHR 0x00800000
|
||||
#define TRIMS_GPIO_PIN_LVU 0x10000000
|
||||
#define TRIMS_GPIO_PIN_RVD 0x00000002
|
||||
#define TRIMS_GPIO_PIN_RHR 0x00000200
|
||||
#elif defined(REVA)
|
||||
#define TRIMS_GPIO_PIN_LHL 0x00000080
|
||||
#define TRIMS_GPIO_PIN_LVD 0x08000000
|
||||
#define TRIMS_GPIO_PIN_RVU 0x40000000
|
||||
#define TRIMS_GPIO_PIN_RHL 0x20000000
|
||||
#define TRIMS_GPIO_PIN_LHR 0x00000010
|
||||
#define TRIMS_GPIO_PIN_LVU 0x10000000
|
||||
#define TRIMS_GPIO_PIN_RVD 0x00000400
|
||||
#define TRIMS_GPIO_PIN_RHR 0x00000200
|
||||
#else
|
||||
#define TRIMS_GPIO_PIN_LHL 0x00800000
|
||||
#define TRIMS_GPIO_PIN_LVD 0x01000000
|
||||
#define TRIMS_GPIO_PIN_RVU 0x00000002
|
||||
#define TRIMS_GPIO_PIN_RHL 0x00000001
|
||||
#define TRIMS_GPIO_PIN_LHR 0x00000010
|
||||
#define TRIMS_GPIO_PIN_LVU 0x10000000
|
||||
#define TRIMS_GPIO_PIN_RVD 0x00000400
|
||||
#define TRIMS_GPIO_PIN_RHR 0x00000200
|
||||
#endif
|
||||
|
||||
//------------------------------------------------------------------------------
|
||||
/// \par sam3s_ek_mem "SAM3S-EK - Memories"
|
||||
/// This page lists definitions related to internal & external on-board memories.
|
||||
///
|
||||
/// !Embedded Flash
|
||||
/// - BOARD_FLASH_EFC
|
||||
void usbMassStorage();
|
||||
|
||||
/// Internal SRAM address
|
||||
#define AT91C_ISRAM AT91C_IRAM
|
||||
#define AT91C_ISRAM_SIZE 0x00008000
|
||||
#define PIN_ENABLE 0x001
|
||||
#define PIN_PERIPHERAL 0x000
|
||||
#define PIN_INPUT 0x002
|
||||
#define PIN_OUTPUT 0x000
|
||||
#define PIN_PULLUP 0x004
|
||||
#define PIN_NO_PULLUP 0x000
|
||||
#define PIN_PULLDOWN 0x008
|
||||
#define PIN_NO_PULLDOWN 0x000
|
||||
#define PIN_PERI_MASK_L 0x010
|
||||
#define PIN_PERI_MASK_H 0x020
|
||||
#define PIN_PER_A 0x000
|
||||
#define PIN_PER_B 0x010
|
||||
#define PIN_PER_C 0x020
|
||||
#define PIN_PER_D 0x030
|
||||
#define PIN_PORT_MASK 0x0C0
|
||||
#define PIN_PORTA 0x000
|
||||
#define PIN_PORTB 0x040
|
||||
#define PIN_PORTC 0x080
|
||||
#define PIN_LOW 0x000
|
||||
#define PIN_HIGH 0x100
|
||||
|
||||
#define AT91C_IFLASH_SIZE (0x40000)
|
||||
#define AT91C_IFLASH_PAGE_SIZE (256) // Internal FLASH 0 Page Size: 256 bytes
|
||||
#define AT91C_IFLASH_NB_OF_PAGES (1024) // Internal FLASH 0 Number of Pages: 512
|
||||
#define AT91C_IFLASH_LOCK_REGION_SIZE (16384) // Internal FLASH 0 Lock Region Size: 16 Kbytes
|
||||
#define AT91C_IFLASH_NB_OF_LOCK_BITS (16) // Internal FLASH 0 Number of Lock Bits: 16
|
||||
// Telemetry port
|
||||
#define SECOND_USART USART0
|
||||
#define SECOND_ID ID_USART0
|
||||
#define SECOND_PINS { PINS_USART0 }
|
||||
|
||||
//------------------------------------------------------------------------------
|
||||
void configure_pins( uint32_t pins, uint16_t config );
|
||||
uint16_t getCurrent();
|
||||
|
||||
extern uint8_t temperature ; // Raw temp reading
|
||||
extern uint8_t maxTemperature ; // Raw temp reading
|
||||
uint8_t getTemperature();
|
||||
|
||||
//------------------------------------------------------------------------------
|
||||
/// \section sam3s_ek_extcomp "SAM3S-EK - External components"
|
||||
/// This page lists the definitions related to external on-board components
|
||||
/// located in the board.h file for the SAM3S-EK.
|
||||
///
|
||||
//------------------------------------------------------------------------------
|
||||
#define strcpy_P strcpy
|
||||
#define strcat_P strcat
|
||||
|
||||
//------------------------------------------------------------------------------
|
||||
/// \par sam3s_ek_chipdef "SAM3S-EK - Individual chip definition"
|
||||
/// This page lists the definitions related to different chip's definition
|
||||
/// located in the board.h file for the SAM3S-EK.
|
||||
#if !defined(REVA)
|
||||
extern uint16_t Current_analogue;
|
||||
extern uint16_t Current_max;
|
||||
extern uint32_t Current_accumulator;
|
||||
extern uint32_t Current_used;
|
||||
extern uint16_t sessionTimer;
|
||||
void calcConsumption();
|
||||
#endif
|
||||
|
||||
/// DBGU
|
||||
#define BOARD_DBGU_ID ID_DBGU
|
||||
// Trainer driver
|
||||
#define SLAVE_MODE() (pwrCheck() == e_power_trainer)
|
||||
void checkTrainerSettings();
|
||||
void init_trainer_capture();
|
||||
|
||||
/// Rtc
|
||||
#define BOARD_RTC_ID ID_RTC
|
||||
// Write Flash driver
|
||||
#define FLASH_PAGESIZE 256
|
||||
void writeFlash(uint32_t * address, uint32_t * buffer);
|
||||
|
||||
/// Twi eeprom
|
||||
#define BOARD_ID_TWI_EEPROM ID_TWI1
|
||||
#define BOARD_BASE_TWI_EEPROM TWI1
|
||||
#define BOARD_PINS_TWI_EEPROM PINS_TWI1
|
||||
// Keys driver
|
||||
extern uint32_t readKeys();
|
||||
extern uint32_t readTrims();
|
||||
#define TRIMS_PRESSED() readTrims()
|
||||
#define KEYS_PRESSED() readKeys()
|
||||
|
||||
/// USART
|
||||
#define BOARD_PIN_USART_RXD PIN_USART1_RXD
|
||||
#define BOARD_PIN_USART_TXD PIN_USART1_TXD
|
||||
#define BOARD_PIN_USART_CTS PIN_USART1_CTS
|
||||
#define BOARD_PIN_USART_RTS PIN_USART1_RTS
|
||||
#define BOARD_PIN_USART_EN PIN_USART1_EN
|
||||
#define BOARD_USART_BASE USART1
|
||||
#define BOARD_ID_USART ID_USART1
|
||||
// Pulses driver
|
||||
void init_no_pulses(uint32_t port);
|
||||
void disable_no_pulses(uint32_t port);
|
||||
void init_ppm(uint32_t port);
|
||||
void disable_ppm(uint32_t port);
|
||||
void init_pxx(uint32_t port);
|
||||
void disable_pxx(uint32_t port);
|
||||
void init_dsm2(uint32_t port);
|
||||
void disable_dsm2(uint32_t port);
|
||||
|
||||
// BlueTooth
|
||||
#define BT_USART UART1
|
||||
#define BT_ID ID_UART1
|
||||
// SD driver
|
||||
#if defined(SIMU)
|
||||
#define sdInit()
|
||||
#define sdDone()
|
||||
#else
|
||||
#define sdPoll10ms()
|
||||
void sdMountPoll();
|
||||
extern "C" {
|
||||
void init_SDcard();
|
||||
void sdInit();
|
||||
void sdDone();
|
||||
uint32_t sd_card_ready();
|
||||
uint32_t sdMounted();
|
||||
}
|
||||
#endif
|
||||
|
||||
//------------------------------------------------------------------------------
|
||||
// WDT driver
|
||||
#if defined(SIMU)
|
||||
#define wdt_disable()
|
||||
#define wdt_enable(x)
|
||||
#define wdt_reset()
|
||||
#else
|
||||
#define wdt_disable()
|
||||
#define wdt_enable(x) WDT->WDT_MR = 0x3FFF207F
|
||||
#define wdt_reset() WDT->WDT_CR = 0xA5000001
|
||||
#endif
|
||||
|
||||
// Backlight driver
|
||||
#define setBacklight(xx) (PWM->PWM_CH_NUM[0].PWM_CDTYUPD = xx)
|
||||
#define backlightEnable() (PWM->PWM_CH_NUM[0].PWM_CDTY = g_eeGeneral.backlightBright)
|
||||
#define backlightDisable() (PWM->PWM_CH_NUM[0].PWM_CDTY = 100)
|
||||
#define isBacklightEnable() (PWM->PWM_CH_NUM[0].PWM_CDTY != 100)
|
||||
|
||||
#define PIN_EBI_NANDOE {1 << 9, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_PULLUP}
|
||||
#define PIN_EBI_NANDWE {1 << 10, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_PULLUP}
|
||||
#define PIN_EBI_NANDCLE {1 << 17, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_PULLUP}
|
||||
#define PIN_EBI_NANDALE {1 << 16, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_PULLUP}
|
||||
#define PIN_EBI_NANDIO {0x000000FF, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_PULLUP}
|
||||
|
||||
/// Nandflash chip enable pin definition.
|
||||
#define BOARD_NF_CE_PIN {1 << 14, PIOC, ID_PIOC, PIO_OUTPUT_1, PIO_DEFAULT}
|
||||
/// Nandflash ready/busy pin definition.
|
||||
#define BOARD_NF_RB_PIN {1 << 18, PIOC, ID_PIOC, PIO_INPUT, PIO_PULLUP}
|
||||
|
||||
/// Nandflash controller peripheral pins definition.
|
||||
#define PINS_NANDFLASH PIN_EBI_NANDIO, BOARD_NF_CE_PIN, BOARD_NF_RB_PIN, PIN_EBI_NANDOE, \
|
||||
PIN_EBI_NANDWE, PIN_EBI_NANDCLE, PIN_EBI_NANDALE
|
||||
|
||||
/// Address for transferring command bytes to the nandflash.
|
||||
#define BOARD_NF_COMMAND_ADDR 0x60400000
|
||||
/// Address for transferring address bytes to the nandflash.
|
||||
#define BOARD_NF_ADDRESS_ADDR 0x60200000
|
||||
/// Address for transferring data bytes to the nandflash.
|
||||
#define BOARD_NF_DATA_ADDR 0x60000000
|
||||
|
||||
extern uint32_t Master_frequency ;
|
||||
|
||||
struct t_serial_tx
|
||||
{
|
||||
uint8_t *buffer ;
|
||||
uint16_t size ;
|
||||
volatile uint16_t ready ;
|
||||
// ADC driver
|
||||
enum Analogs {
|
||||
STICK1,
|
||||
STICK2,
|
||||
STICK3,
|
||||
STICK4,
|
||||
POT1,
|
||||
POT2,
|
||||
POT3,
|
||||
POT_LAST = POT3,
|
||||
TX_VOLTAGE,
|
||||
#if !defined(REVA)
|
||||
TX_CURRENT,
|
||||
#endif
|
||||
NUMBER_ANALOG
|
||||
};
|
||||
void adcInit();
|
||||
void adcRead(void);
|
||||
uint16_t getAnalogValue(uint8_t index);
|
||||
uint16_t getBatteryVoltage(); // returns current battery voltage in 10mV steps
|
||||
void setSticksGain(uint8_t gains);
|
||||
|
||||
#endif // _BOARD_H_
|
||||
// Buzzer driver
|
||||
void buzzerSound(uint8_t duration);
|
||||
void buzzerHeartbeat();
|
||||
#define BUZZER_HEARTBEAT buzzerHeartbeat
|
||||
|
||||
// i2c driver
|
||||
void i2cCheck();
|
||||
|
||||
// Coproc driver
|
||||
void coprocInit();
|
||||
void coprocWriteData(uint8_t *data, uint32_t size);
|
||||
void coprocReadData(bool onlytemp=false);
|
||||
extern int8_t volumeRequired;
|
||||
extern uint8_t Coproc_read;
|
||||
extern int8_t Coproc_valid;
|
||||
extern int8_t Coproc_temp;
|
||||
extern int8_t Coproc_maxtemp;
|
||||
|
||||
// Haptic driver
|
||||
void hapticOff(void);
|
||||
void hapticOn(uint32_t pwmPercent);
|
||||
|
||||
// BlueTooth driver
|
||||
#if defined(BLUETOOTH)
|
||||
void btInit();
|
||||
void btTask(void* pdata);
|
||||
void btPushByte(uint8_t data);
|
||||
#endif
|
||||
|
||||
// Power driver
|
||||
void pwrInit();
|
||||
void pwrOff();
|
||||
uint32_t pwrCheck();
|
||||
uint32_t pwroffPressed();
|
||||
#define UNEXPECTED_SHUTDOWN() (g_eeGeneral.unexpectedShutdown)
|
||||
|
||||
// EEPROM driver
|
||||
void eepromInit();
|
||||
uint32_t eepromReadStatus();
|
||||
extern volatile uint32_t Spi_complete;
|
||||
void eepromWriteEnable();
|
||||
void eepromBlockErase(uint32_t address);
|
||||
void eepromReadArray(uint32_t address, uint8_t * buffer, uint32_t size);
|
||||
void eepromByteProgram(uint32_t address, uint8_t * buffer, uint32_t size);
|
||||
|
||||
// Rotary Encoder driver
|
||||
void rotencInit();
|
||||
void rotencEnd();
|
||||
|
||||
#if ROTARY_ENCODERS > 0
|
||||
#define REA_DOWN() (!(PIOB->PIO_PDSR & 0x40))
|
||||
#else
|
||||
#define REA_DOWN() (0)
|
||||
#endif
|
||||
|
||||
// Debug driver
|
||||
void debugPutc(const char c);
|
||||
|
||||
// Telemetry driver
|
||||
void telemetryPortInit(uint32_t baudrate, int mode);
|
||||
uint32_t telemetryTransmitPending();
|
||||
void telemetryTransmitBuffer(uint8_t * buffer, uint32_t size);
|
||||
void rxPdcUsart( void (*pChProcess)(uint8_t x) );
|
||||
|
||||
// Second UART driver
|
||||
void serial2TelemetryInit(unsigned int protocol);
|
||||
bool telemetrySecondPortReceive(uint8_t & data);
|
||||
|
||||
extern const uint8_t BootCode[];
|
||||
|
||||
#endif // _BOARD_SKY9X_H_
|
||||
|
||||
@@ -1,23 +1,23 @@
|
||||
/*
|
||||
* Copyright (C) OpenTX
|
||||
*
|
||||
* Based on code named
|
||||
* th9x - http://code.google.com/p/th9x
|
||||
* er9x - http://code.google.com/p/er9x
|
||||
* gruvin9x - http://code.google.com/p/gruvin9x
|
||||
*
|
||||
* License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
/*
|
||||
* Copyright (C) OpenTX
|
||||
*
|
||||
* Based on code named
|
||||
* th9x - http://code.google.com/p/th9x
|
||||
* er9x - http://code.google.com/p/er9x
|
||||
* gruvin9x - http://code.google.com/p/gruvin9x
|
||||
*
|
||||
* License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
/**
|
||||
* \file
|
||||
*
|
||||
@@ -30,7 +30,7 @@
|
||||
* Headers
|
||||
*----------------------------------------------------------------------------*/
|
||||
|
||||
#include "board.h"
|
||||
#include "board_lowlevel.h"
|
||||
|
||||
/*----------------------------------------------------------------------------
|
||||
* Local definitions
|
||||
|
||||
@@ -0,0 +1,637 @@
|
||||
/*
|
||||
* Copyright (C) OpenTX
|
||||
*
|
||||
* Based on code named
|
||||
* th9x - http://code.google.com/p/th9x
|
||||
* er9x - http://code.google.com/p/er9x
|
||||
* gruvin9x - http://code.google.com/p/gruvin9x
|
||||
*
|
||||
* License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
// TODO merge this file with board_sky9x.h
|
||||
|
||||
#ifndef _BOARD_H_
|
||||
#define _BOARD_H_
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
#include "chip.h"
|
||||
|
||||
#if defined(REVA)
|
||||
#include "AT91SAM3S2.h"
|
||||
#else
|
||||
#include "AT91SAM3S4.h"
|
||||
#endif
|
||||
|
||||
#if !defined(SIMU)
|
||||
#include "core_cm3.h"
|
||||
#endif
|
||||
|
||||
//------------------------------------------------------------------------------
|
||||
// Definitions
|
||||
//------------------------------------------------------------------------------
|
||||
|
||||
//------------------------------------------------------------------------------
|
||||
/// \par
|
||||
/// This page lists several definition related to the board description.
|
||||
///
|
||||
/// Definitions
|
||||
/// - BOARD_NAME
|
||||
|
||||
/// Name of the board.
|
||||
#define BOARD_NAME "AT91SAM3S-EK"
|
||||
/// Board definition.
|
||||
#define at91sam3sek
|
||||
/// Family definition (already defined).
|
||||
#define at91sam3s
|
||||
/// Core definition
|
||||
#define cortexm3
|
||||
|
||||
// TODO remove these definitions
|
||||
//#define BOARD_REV_A
|
||||
#define BOARD_REV_B
|
||||
|
||||
//------------------------------------------------------------------------------
|
||||
|
||||
//------------------------------------------------------------------------------
|
||||
/// \par sam3s_ek_opfreq "SAM3S-EK - Operating frequencies"
|
||||
/// This page lists several definition related to the board operating frequency
|
||||
/// (when using the initialization done by board_lowlevel.c).
|
||||
///
|
||||
/// !Definitions
|
||||
/// - BOARD_MAINOSC
|
||||
/// - BOARD_MCK
|
||||
|
||||
/// Frequency of the board main oscillator.
|
||||
#define BOARD_MAINOSC 12000000
|
||||
|
||||
/// Master clock frequency (when using board_lowlevel.c).
|
||||
// #define BOARD_MCK 64000000
|
||||
|
||||
//------------------------------------------------------------------------------
|
||||
// ADC
|
||||
//------------------------------------------------------------------------------
|
||||
|
||||
/// Startup time max, return from Idle mode (in �s)
|
||||
#define ADC_STARTUP_TIME_MAX 15
|
||||
/// Track and hold Acquisition Time min (in ns)
|
||||
#define ADC_TRACK_HOLD_TIME_MIN 1200
|
||||
|
||||
//------------------------------------------------------------------------------
|
||||
|
||||
//------------------------------------------------------------------------------
|
||||
/// USB attributes configuration descriptor (bus or self powered, remote wakeup)
|
||||
//#define BOARD_USB_BMATTRIBUTES USBConfigurationDescriptor_SELFPOWERED_RWAKEUP
|
||||
#define BOARD_USB_BMATTRIBUTES USBConfigurationDescriptor_SELFPOWERED_NORWAKEUP
|
||||
//------------------------------------------------------------------------------
|
||||
|
||||
//------------------------------------------------------------------------------
|
||||
/// \par sam3s_ek_piodef "SAM3S-EK - PIO definitions"
|
||||
/// This pages lists all the pio definitions contained in board.h. The constants
|
||||
/// are named using the following convention: PIN_* for a constant which defines
|
||||
/// a single Pin instance (but may include several PIOs sharing the same
|
||||
/// controller), and PINS_* for a list of Pin instances.
|
||||
///
|
||||
/// !ADC
|
||||
/// - PIN_ADC0_AD0
|
||||
/// - PIN_ADC0_AD1
|
||||
/// - PIN_ADC0_AD2
|
||||
/// - PIN_ADC0_AD3
|
||||
/// - PIN_ADC0_AD4
|
||||
/// - PIN_ADC0_AD5
|
||||
/// - PIN_ADC0_AD6
|
||||
/// - PIN_ADC0_AD7
|
||||
/// - PINS_ADC0
|
||||
///
|
||||
/// !UART
|
||||
/// - PINS_UART
|
||||
///
|
||||
/// !EBI
|
||||
/// - PIN_EBI_DATA_BUS
|
||||
/// - PIN_EBI_NCS0
|
||||
/// - PIN_EBI_NRD
|
||||
/// - PIN_EBI_NWE
|
||||
/// - PIN_EBI_ADDR_BUS
|
||||
/// - PIN_EBI_PSRAM_NBS
|
||||
/// - PIN_EBI_A1
|
||||
/// - PIN_EBI_LCD_RS
|
||||
///
|
||||
/// !LEDs
|
||||
/// - PIN_LED_0
|
||||
/// - PIN_LED_1
|
||||
/// - PIN_LED_2
|
||||
/// - PINS_LEDS
|
||||
///
|
||||
/// !MCI
|
||||
/// - PINS_MCI
|
||||
///
|
||||
/// !Push buttons
|
||||
/// - PIN_PUSHBUTTON_1
|
||||
/// - PIN_PUSHBUTTON_2
|
||||
/// - PINS_PUSHBUTTONS
|
||||
/// - PUSHBUTTON_BP1
|
||||
/// - PUSHBUTTON_BP2
|
||||
///
|
||||
/// !PWMC
|
||||
/// - PIN_PWMC_PWMH0
|
||||
/// - PIN_PWMC_PWML0
|
||||
/// - PIN_PWMC_PWMH1
|
||||
/// - PIN_PWMC_PWML1
|
||||
/// - PIN_PWMC_PWMH2
|
||||
/// - PIN_PWMC_PWML2
|
||||
/// - PIN_PWMC_PWMH3
|
||||
/// - PIN_PWMC_PWML3
|
||||
/// - PIN_PWM_LED0
|
||||
/// - PIN_PWM_LED1
|
||||
/// - PIN_PWM_LED2
|
||||
/// - CHANNEL_PWM_LED0
|
||||
/// - CHANNEL_PWM_LED1
|
||||
/// - CHANNEL_PWM_LED2
|
||||
///
|
||||
/// !SPI
|
||||
/// - PIN_SPI_MISO
|
||||
/// - PIN_SPI_MOSI
|
||||
/// - PIN_SPI_SPCK
|
||||
/// - PINS_SPI
|
||||
/// - PIN_SPI_NPCS0_PA11
|
||||
///
|
||||
/// ! SSC
|
||||
/// - PIN_SSC_TD
|
||||
/// - PIN_SSC_TK
|
||||
/// - PIN_SSC_TF
|
||||
/// - PINS_SSC_CODEC
|
||||
///
|
||||
/// ! PCK0
|
||||
/// - PIN_PCK0
|
||||
///
|
||||
/// !TWI
|
||||
/// - PIN_TWI_TWD0
|
||||
/// - PIN_TWI_TWCK0
|
||||
/// - PINS_TWI
|
||||
///
|
||||
/// !USART0
|
||||
/// - PIN_USART0_RXD
|
||||
/// - PIN_USART0_TXD
|
||||
/// - PIN_USART0_CTS
|
||||
/// - PIN_USART0_RTS
|
||||
/// - PIN_USART0_SCK
|
||||
///
|
||||
/// !USB
|
||||
/// - PIN_USB_PULLUP
|
||||
///
|
||||
|
||||
/// ADC_AD0 pin definition.
|
||||
#define PIN_ADC0_AD0 {1 << 21, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}
|
||||
/// ADC_AD1 pin definition.
|
||||
#define PIN_ADC0_AD1 {1 << 30, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}
|
||||
/// ADC_AD2 pin definition.
|
||||
#define PIN_ADC0_AD2 {1 << 3, PIOB, ID_PIOB, PIO_INPUT, PIO_DEFAULT}
|
||||
/// ADC_AD3 pin definition.
|
||||
#define PIN_ADC0_AD3 {1 << 4, PIOB, ID_PIOB, PIO_INPUT, PIO_DEFAULT}
|
||||
/// ADC_AD4 pin definition.
|
||||
#define PIN_ADC0_AD4 {1 << 15, PIOC, ID_PIOC, PIO_INPUT, PIO_DEFAULT}
|
||||
/// ADC_AD5 pin definition.
|
||||
#define PIN_ADC0_AD5 {1 << 16, PIOC, ID_PIOC, PIO_INPUT, PIO_DEFAULT}
|
||||
/// ADC_AD6 pin definition.
|
||||
#define PIN_ADC0_AD6 {1 << 17, PIOC, ID_PIOC, PIO_INPUT, PIO_DEFAULT}
|
||||
/// ADC_AD7 pin definition.
|
||||
#define PIN_ADC0_AD7 {1 << 18, PIOC, ID_PIOC, PIO_INPUT, PIO_DEFAULT}
|
||||
|
||||
/// Pins ADC
|
||||
#define PINS_ADC PIN_ADC0_AD0, PIN_ADC0_AD1, PIN_ADC0_AD2, PIN_ADC0_AD3, PIN_ADC0_AD4, PIN_ADC0_AD5, PIN_ADC0_AD6, PIN_ADC0_AD7
|
||||
|
||||
/** UART pins (UTXD0 and URXD0) definitions, PA9,10. */
|
||||
#define PINS_UART {0x00000600, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
|
||||
/// EBI
|
||||
#define PIN_EBI_DATA_BUS {0xFF, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_PULLUP}
|
||||
#define PIN_EBI_NRD {1 << 11, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_PULLUP}
|
||||
#define PIN_EBI_NWE {1 << 8, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_PULLUP}
|
||||
|
||||
#define PIN_EBI_NCS0 {1 << 20, PIOB, ID_PIOB, PIO_PERIPH_A, PIO_PULLUP}
|
||||
#define PIN_EBI_PSRAM_ADDR_BUS {0x3f00fff, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_PULLUP}
|
||||
#define PIN_EBI_PSRAM_NBS {1 << 7, PIOB, ID_PIOB, PIO_PERIPH_B, PIO_PULLUP}, \
|
||||
{1 << 15, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_PULLUP}
|
||||
#define PIN_EBI_A1 {1 << 19, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_PULLUP}
|
||||
|
||||
#define PIN_EBI_NCS1 {1 << 15, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_PULLUP} /* LCD CS pin */
|
||||
#define PIN_EBI_LCD_RS {1 << 19, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_PULLUP} /* LCD RS pin */
|
||||
|
||||
#ifdef BOARD_REV_A
|
||||
/** LED #0 pin definition. */
|
||||
#define PIN_LED_0 {1 << 20, PIOC, ID_PIOC, PIO_OUTPUT_1, PIO_DEFAULT}
|
||||
/** LED #1 pin definition. */
|
||||
#define PIN_LED_1 {1 << 21, PIOC, ID_PIOC, PIO_OUTPUT_1, PIO_DEFAULT}
|
||||
/** LED #2 pin definition. */
|
||||
#define PIN_LED_2 {1 << 22, PIOC, ID_PIOC, PIO_OUTPUT_1, PIO_DEFAULT}
|
||||
#endif
|
||||
#ifdef BOARD_REV_B
|
||||
/** LED #0 pin definition. */
|
||||
#define PIN_LED_0 {1 << 19, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
|
||||
/** LED #1 pin definition. */
|
||||
#define PIN_LED_1 {1 << 20, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
|
||||
/** LED #2 pin definition. */
|
||||
#define PIN_LED_2 {1 << 20, PIOC, ID_PIOC, PIO_OUTPUT_1, PIO_DEFAULT}
|
||||
#endif
|
||||
|
||||
/** List of all LEDs definitions. */
|
||||
#define PINS_LEDS PIN_LED_0, PIN_LED_1, PIN_LED_2
|
||||
|
||||
/** MCI pins definition. */
|
||||
#define PINS_MCI {0x3fUL << 26, PIOA, ID_PIOA, PIO_PERIPH_C, PIO_PULLUP}
|
||||
/** MCI pin Card Detect. */
|
||||
#define PIN_MCI_CD {PIO_PB7, PIOB, ID_PIOB, PIO_INPUT, PIO_PULLUP}
|
||||
|
||||
/** Push button #0 definition. Attributes = pull-up + debounce + interrupt on rising edge. */
|
||||
#define PIN_PUSHBUTTON_1 {1 << 3, PIOB, ID_PIOB, PIO_INPUT, PIO_PULLUP | PIO_DEBOUNCE}
|
||||
/** Push button #1 definition. Attributes = pull-up + debounce + interrupt on falling edge. */
|
||||
#define PIN_PUSHBUTTON_2 {1 << 12, PIOC, ID_PIOC, PIO_INPUT, PIO_PULLUP | PIO_DEBOUNCE}
|
||||
/** List of all push button definitions. */
|
||||
#define PINS_PUSHBUTTONS PIN_PUSHBUTTON_1, PIN_PUSHBUTTON_2
|
||||
|
||||
/** Push button #1 index. */
|
||||
#define PUSHBUTTON_BP1 0
|
||||
/** Push button #2 index. */
|
||||
#define PUSHBUTTON_BP2 1
|
||||
|
||||
/// Simulated joystick LEFT index.
|
||||
#define JOYSTICK_LEFT 0
|
||||
/// Simulated joystick RIGHT index.
|
||||
#define JOYSTICK_RIGHT 1
|
||||
|
||||
/** PWMC PWM0 pin definition. */
|
||||
#define PIN_PWMC_PWMH0 {1 << 18, PIOC, ID_PIOC, PIO_PERIPH_B, PIO_DEFAULT}
|
||||
#define PIN_PWMC_PWML0 {1 << 19, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
|
||||
/** PWMC PWM1 pin definition. */
|
||||
#define PIN_PWMC_PWMH1 {1 << 19, PIOC, ID_PIOC, PIO_PERIPH_B, PIO_DEFAULT}
|
||||
#define PIN_PWMC_PWML1 {1 << 20, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
|
||||
/** PWMC PWM2 pin definition. */
|
||||
#define PIN_PWMC_PWMH2 {1 << 20, PIOC, ID_PIOC, PIO_PERIPH_B, PIO_DEFAULT}
|
||||
#define PIN_PWMC_PWML2 {1 << 16, PIOA, ID_PIOA, PIO_PERIPH_C, PIO_DEFAULT}
|
||||
/** PWMC PWM3 pin definition. */
|
||||
#define PIN_PWMC_PWMH3 {1 << 21, PIOC, ID_PIOC, PIO_PERIPH_B, PIO_DEFAULT}
|
||||
#define PIN_PWMC_PWML3 {1 << 15, PIOA, ID_PIOA, PIO_PERIPH_C, PIO_DEFAULT}
|
||||
/** PWM pin definition for LED0 */
|
||||
#define PIN_PWM_LED0 PIN_PWMC_PWMH0, PIN_PWMC_PWML0
|
||||
/** PWM pin definition for LED1 */
|
||||
#define PIN_PWM_LED1 PIN_PWMC_PWMH2, PIN_PWMC_PWML2
|
||||
/** PWM pin definition for LED2 */
|
||||
#define PIN_PWM_LED2 PIN_PWMC_PWMH3, PIN_PWMC_PWML3
|
||||
/** PWM channel for LED0 */
|
||||
#define CHANNEL_PWM_LED0 0
|
||||
/** PWM channel for LED1 */
|
||||
#define CHANNEL_PWM_LED1 2
|
||||
/** PWM channel for LED2 */
|
||||
#define CHANNEL_PWM_LED2 3
|
||||
|
||||
/** SPI MISO pin definition. */
|
||||
#define PIN_SPI_MISO {1 << 12, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
/** SPI MOSI pin definition. */
|
||||
#define PIN_SPI_MOSI {1 << 13, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
/** SPI SPCK pin definition. */
|
||||
#define PIN_SPI_SPCK {1 << 14, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
/** SPI chip select pin definition. */
|
||||
#define PIN_SPI_NPCS0_PA11 {1 << 11, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
/** List of SPI pin definitions (MISO, MOSI & SPCK). */
|
||||
#define PINS_SPI PIN_SPI_MISO, PIN_SPI_MOSI, PIN_SPI_SPCK
|
||||
|
||||
/// SSC pins definition.
|
||||
#define PIN_SSC_TD {0x1 << 26, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
#define PIN_SSC_TK {0x1 << 28, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
#define PIN_SSC_TF {0x1 << 30, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
#define PINS_SSC_CODEC PIN_SSC_TD, PIN_SSC_TK, PIN_SSC_TF
|
||||
|
||||
/// PCK0
|
||||
#define PIN_PCK0 {0x1 << 21, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
|
||||
|
||||
/// TWI pins definition.
|
||||
#define TWI_V3XX
|
||||
#define PIN_TWI_TWD0 {0x1 << 9, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
#define PIN_TWI_TWCK0 {0x1 << 10, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
#define PINS_TWI0 PIN_TWI_TWD0, PIN_TWI_TWCK0
|
||||
#define PIN_TWI_TWD1 {0x1 << 24, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
#define PIN_TWI_TWCK1 {0x1 << 25, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
#define PINS_TWI1 PIN_TWI_TWD1, PIN_TWI_TWCK1
|
||||
|
||||
/// USART0
|
||||
#define PIN_USART0_RXD {0x1 << 19, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
#define PIN_USART0_TXD {0x1 << 18, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
#define PIN_USART0_CTS {0x1 << 8, PIOB, ID_PIOB, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
#define PIN_USART0_RTS {0x1 << 7, PIOB, ID_PIOB, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
#define PIN_USART0_SCK {0x1 << 17, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
|
||||
/// USART1
|
||||
#define PIN_USART1_RXD {0x1 << 21, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
#define PIN_USART1_TXD {0x1 << 22, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
#define PIN_USART1_CTS {0x1 << 25, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
#define PIN_USART1_RTS {0x1 << 24, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
#define PIN_USART1_EN {0x1 << 23, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
|
||||
|
||||
/// USB VBus monitoring pin definition.
|
||||
#ifdef BOARD_REV_A
|
||||
#define PIN_USB_VBUS {1 << 23, PIOC, ID_PIOC, PIO_INPUT, PIO_DEFAULT}
|
||||
#endif
|
||||
#ifdef BOARD_REV_B
|
||||
#define PIN_USB_VBUS {1 << 21, PIOC, ID_PIOC, PIO_INPUT, PIO_DEFAULT}
|
||||
#endif
|
||||
|
||||
#define usbPlugged() (PIOC->PIO_PDSR & PIO_PC25)
|
||||
|
||||
//------------------------------------------------------------------------------
|
||||
|
||||
//------------------------------------------------------------------------------
|
||||
/// \par sam3s_ek_extcomp "SAM3S-EK - External components"
|
||||
/// This page lists the definitions related to external on-board components
|
||||
/// located in the board.h file for the AT91SAM3S-EK.
|
||||
///
|
||||
/// !AT45 Dataflash Card
|
||||
/// - BOARD_AT45_A_SPI_BASE
|
||||
/// - BOARD_AT45_A_SPI_ID
|
||||
/// - BOARD_AT45_A_SPI_PINS
|
||||
/// - BOARD_AT45_A_SPI
|
||||
/// - BOARD_AT45_A_NPCS
|
||||
/// - BOARD_AT45_A_NPCS_PIN
|
||||
///
|
||||
/// !AT45 Dataflash (serial onboard DataFlash)
|
||||
/// - BOARD_AT45_B_SPI_BASE
|
||||
/// - BOARD_AT45_B_SPI_ID
|
||||
/// - BOARD_AT45_B_SPI_PINS
|
||||
/// - BOARD_AT45_B_SPI
|
||||
/// - BOARD_AT45_B_NPCS
|
||||
/// - BOARD_AT45_B_NPCS_PIN
|
||||
///
|
||||
/// !AT26 Serial Flash
|
||||
/// - BOARD_AT26_A_SPI_BASE
|
||||
/// - BOARD_AT26_A_SPI_ID
|
||||
/// - BOARD_AT26_A_SPI_PINS
|
||||
/// - BOARD_AT26_A_SPI
|
||||
/// - BOARD_AT26_A_NPCS
|
||||
/// - BOARD_AT26_A_NPCS_PIN
|
||||
///
|
||||
/// !SD Card
|
||||
/// - MCI2_INTERFACE
|
||||
/// - BOARD_SD_MCI_BASE
|
||||
/// - BOARD_SD_MCI_ID
|
||||
/// - BOARD_SD_PINS
|
||||
/// - BOARD_SD_SLOT
|
||||
///
|
||||
/// !PSRAM
|
||||
/// - BOARD_PSRAM_PINS
|
||||
///
|
||||
/// !LCD
|
||||
/// - BOARD_LCD_ILI9325
|
||||
/// - BOARD_LCD_PINS
|
||||
/// - BOARD_BACKLIGHT_PIN
|
||||
/// - BOARD_LCD_BASE
|
||||
/// - BOARD_LCD_RS
|
||||
/// - BOARD_LCD_WIDTH
|
||||
/// - BOARD_LCD_HEIGHT
|
||||
///
|
||||
/// !TouchScreen
|
||||
/// - BOARD_TSC_ADS7843
|
||||
/// - PIN_TCS_IRQ
|
||||
/// - PIN_TCS_BUSY
|
||||
/// - BOARD_TSC_SPI_BASE
|
||||
/// - BOARD_TSC_SPI_ID
|
||||
/// - BOARD_TSC_SPI_PINS
|
||||
/// - BOARD_TSC_NPCS
|
||||
/// - BOARD_TSC_NPCS_PIN
|
||||
///
|
||||
/// Base address of SPI peripheral connected to the dataflash.
|
||||
//#define BOARD_AT45_A_SPI_BASE SPI0
|
||||
///// Identifier of SPI peripheral connected to the dataflash.
|
||||
//#define BOARD_AT45_A_SPI_ID ID_SPI0
|
||||
///// Pins of the SPI peripheral connected to the dataflash.
|
||||
//#define BOARD_AT45_A_SPI_PINS PINS_SPI0
|
||||
///// Dataflahs SPI number.
|
||||
//#define BOARD_AT45_A_SPI 0
|
||||
///// Chip select connected to the dataflash.
|
||||
//#define BOARD_AT45_A_NPCS 3
|
||||
///// Chip select pin connected to the dataflash.
|
||||
//#define BOARD_AT45_A_NPCS_PIN PIN_SPI0_NPCS3
|
||||
|
||||
/// Base address of SPI peripheral connected to the dataflash.
|
||||
//#define BOARD_AT45_B_SPI_BASE SPI1
|
||||
///// Identifier of SPI peripheral connected to the dataflash.
|
||||
//#define BOARD_AT45_B_SPI_ID ID_SPI1
|
||||
///// Pins of the SPI peripheral connected to the dataflash.
|
||||
//#define BOARD_AT45_B_SPI_PINS PINS_SPI1
|
||||
///// Dataflahs SPI number.
|
||||
//#define BOARD_AT45_B_SPI 1
|
||||
///// Chip select connected to the dataflash.
|
||||
//#define BOARD_AT45_B_NPCS 3
|
||||
///// Chip select pin connected to the dataflash.
|
||||
//#define BOARD_AT45_B_NPCS_PIN PIN_SPI1_NPCS3
|
||||
|
||||
/// Base address of SPI peripheral connected to the serialflash.
|
||||
//#define BOARD_AT26_A_SPI_BASE SPI0
|
||||
///// Identifier of SPI peripheral connected to the serialflash.
|
||||
//#define BOARD_AT26_A_SPI_ID ID_SPI0
|
||||
///// Pins of the SPI peripheral connected to the serialflash.
|
||||
//#define BOARD_AT26_A_SPI_PINS PINS_SPI0
|
||||
///// Serialflash SPI number.
|
||||
//#define BOARD_AT26_A_SPI 0
|
||||
///// Chip select connected to the serialflash.
|
||||
//#define BOARD_AT26_A_NPCS 3
|
||||
///// Chip select pin connected to the serialflash.
|
||||
//#define BOARD_AT26_A_NPCS_PIN PIN_SPI0_NPCS3
|
||||
|
||||
/// ISO7816
|
||||
/// - PIN_SMARTCARD_CONNECT
|
||||
/// - PIN_ISO7816_RSTMC
|
||||
/// - PINS_ISO7816
|
||||
|
||||
/// Smartcard detection pin
|
||||
//#define PIN_SMARTCARD_CONNECT {1 << 5, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}
|
||||
/// PIN used for reset the smartcard
|
||||
//#define PIN_ISO7816_RSTMC {1 << 7, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
|
||||
/// Pins used for connect the smartcard
|
||||
//#define PINS_ISO7816 PIN_USART0_TXD, PIN_USART0_SCK, PIN_ISO7816_RSTMC
|
||||
|
||||
/// Dma channel number
|
||||
#define BOARD_MCI_DMA_CHANNEL 0
|
||||
/// MCI0 DMA hardware handshaking ID
|
||||
#define DMA_HW_SRC_REQ_ID_MCI0 AT91C_HDMA_SRC_PER_0
|
||||
#define DMA_HW_DEST_REQ_ID_MCI0 AT91C_HDMA_DST_PER_0
|
||||
/// MCI1 DMA hardware handshaking ID
|
||||
#define DMA_HW_SRC_REQ_ID_MCI1 AT91C_HDMA_SRC_PER_13
|
||||
#define DMA_HW_DEST_REQ_ID_MCI1 AT91C_HDMA_DST_PER_13
|
||||
/// SD DMA hardware handshaking ID
|
||||
#define BOARD_SD_DMA_HW_SRC_REQ_ID DMA_HW_SRC_REQ_ID_MCI0
|
||||
#define BOARD_SD_DMA_HW_DEST_REQ_ID DMA_HW_DEST_REQ_ID_MCI0
|
||||
|
||||
|
||||
/// HS MCI interface
|
||||
#define MCI2_INTERFACE
|
||||
/// Base address of the MCI peripheral connected to the SD card.
|
||||
#define BOARD_SD_MCI_BASE MCI0//MCI
|
||||
///// Peripheral identifier of the MCI connected to the SD card.
|
||||
#define BOARD_SD_MCI_ID AT91C_ID_MCI0 ID_MCI0 //ID_MCI
|
||||
///// MCI pins that shall be configured to access the SD card.
|
||||
#define BOARD_SD_PINS PINS_MCI
|
||||
///// MCI slot to which the SD card is connected to.
|
||||
#define BOARD_SD_SLOT MCI_SD_SLOTA
|
||||
///// MCI Card Detect pin.
|
||||
#define BOARD_SD_PIN_CD PIN_MCI_CD
|
||||
|
||||
#define SD_CARD_PRESENT() ( (PIOB->PIO_PDSR & PIO_PB7) == 0 )
|
||||
|
||||
// States for initialising card
|
||||
#define SD_ST_ERR -1
|
||||
#define SD_ST_STARTUP 0
|
||||
#define SD_ST_EMPTY 1
|
||||
#define SD_ST_INIT1 2
|
||||
#define SD_ST_INIT2 3
|
||||
#define SD_ST_IDLE 4
|
||||
#define SD_ST_READY 5
|
||||
#define SD_ST_IDENT 6
|
||||
#define SD_ST_STBY 7
|
||||
#define SD_ST_TRAN 8
|
||||
#define SD_ST_DATA 9
|
||||
#define SD_ST_MOUNTED 10
|
||||
|
||||
extern uint32_t Cmd_A41_resp;
|
||||
extern int32_t Card_state;
|
||||
extern volatile uint32_t Card_initialized;
|
||||
extern uint32_t Card_CSD[4];
|
||||
extern uint32_t transSpeed;
|
||||
|
||||
#define OCR_SD_CCS (1UL << 30)
|
||||
|
||||
#define SD_CSD(csd, bitfield, bits) ((csd[3-(bitfield)/32] >> ((bitfield)%32)) & ((1 << (bits)) - 1))
|
||||
|
||||
#define SD_CSD_TRAN_SPEED(pSd) SD_CSD(pSd, 96, 8) ///< Max. data transfer rate
|
||||
|
||||
#define SD_CSD_C_SIZE(pSd) ((SD_CSD(pSd, 72, 2) << 10) + \
|
||||
(SD_CSD(pSd, 64, 8) << 2) + \
|
||||
SD_CSD(pSd, 62, 2)) ///< Device size
|
||||
|
||||
#define SD_CSD_C_SIZE_HC(csd) ((SD_CSD(csd, 64, 6) << 16) + \
|
||||
(SD_CSD(csd, 56, 8) << 8) + \
|
||||
SD_CSD(csd, 48, 8)) ///< Device size v2.0 High Capacity
|
||||
|
||||
#define SD_CSD_C_SIZE_MULT(pSd) SD_CSD(pSd, 47, 3) ///< Device size multiplier
|
||||
|
||||
#define SD_CSD_MULT(pSd) (1 << (SD_CSD_C_SIZE_MULT(pSd) + 2))
|
||||
|
||||
#define SD_CSD_READ_BL_LEN(pSd) SD_CSD(pSd, 80, 4) ///< Max. read data block length
|
||||
|
||||
#define SD_CSD_BLKLEN(pSd) (1 << (SD_CSD_READ_BL_LEN(pSd) - 9))
|
||||
|
||||
#define SD_CSD_BLOCKNR(pSd) ((SD_CSD_C_SIZE(pSd) + 1) * SD_CSD_MULT(pSd)) * SD_CSD_BLKLEN(pSd)
|
||||
|
||||
#define SD_CSD_BLOCKNR_HC(pSd) ((SD_CSD_C_SIZE_HC(pSd) + 1) * 1024)
|
||||
|
||||
#if !defined(SIMU)
|
||||
#define SD_IS_HC() (Cmd_A41_resp & OCR_SD_CCS)
|
||||
#define SD_GET_BLOCKNR() (SD_IS_HC() ? (SD_CSD_BLOCKNR_HC(Card_CSD)) : (SD_CSD_BLOCKNR(Card_CSD)))
|
||||
#define SD_GET_SPEED() (transSpeed)
|
||||
#else
|
||||
#define SD_IS_HC() (0)
|
||||
#define SD_GET_BLOCKNR() (0)
|
||||
#define SD_GET_SPEED() (0)
|
||||
#endif
|
||||
|
||||
//------------------------------------------------------------------------------
|
||||
|
||||
//------------------------------------------------------------------------------
|
||||
/// \par sam3s_ek_mem "SAM3S-EK - Memories"
|
||||
/// This page lists definitions related to internal & external on-board memories.
|
||||
///
|
||||
/// !Embedded Flash
|
||||
/// - BOARD_FLASH_EFC
|
||||
|
||||
/// Internal SRAM address
|
||||
#define AT91C_ISRAM AT91C_IRAM
|
||||
#define AT91C_ISRAM_SIZE 0x00008000
|
||||
|
||||
#define AT91C_IFLASH_SIZE (0x40000)
|
||||
#define AT91C_IFLASH_PAGE_SIZE (256) // Internal FLASH 0 Page Size: 256 bytes
|
||||
#define AT91C_IFLASH_NB_OF_PAGES (1024) // Internal FLASH 0 Number of Pages: 512
|
||||
#define AT91C_IFLASH_LOCK_REGION_SIZE (16384) // Internal FLASH 0 Lock Region Size: 16 Kbytes
|
||||
#define AT91C_IFLASH_NB_OF_LOCK_BITS (16) // Internal FLASH 0 Number of Lock Bits: 16
|
||||
|
||||
//------------------------------------------------------------------------------
|
||||
|
||||
|
||||
//------------------------------------------------------------------------------
|
||||
/// \section sam3s_ek_extcomp "SAM3S-EK - External components"
|
||||
/// This page lists the definitions related to external on-board components
|
||||
/// located in the board.h file for the SAM3S-EK.
|
||||
///
|
||||
//------------------------------------------------------------------------------
|
||||
|
||||
//------------------------------------------------------------------------------
|
||||
/// \par sam3s_ek_chipdef "SAM3S-EK - Individual chip definition"
|
||||
/// This page lists the definitions related to different chip's definition
|
||||
/// located in the board.h file for the SAM3S-EK.
|
||||
|
||||
/// DBGU
|
||||
#define BOARD_DBGU_ID ID_DBGU
|
||||
|
||||
/// Rtc
|
||||
#define BOARD_RTC_ID ID_RTC
|
||||
|
||||
/// Twi eeprom
|
||||
#define BOARD_ID_TWI_EEPROM ID_TWI1
|
||||
#define BOARD_BASE_TWI_EEPROM TWI1
|
||||
#define BOARD_PINS_TWI_EEPROM PINS_TWI1
|
||||
|
||||
/// USART
|
||||
#define BOARD_PIN_USART_RXD PIN_USART1_RXD
|
||||
#define BOARD_PIN_USART_TXD PIN_USART1_TXD
|
||||
#define BOARD_PIN_USART_CTS PIN_USART1_CTS
|
||||
#define BOARD_PIN_USART_RTS PIN_USART1_RTS
|
||||
#define BOARD_PIN_USART_EN PIN_USART1_EN
|
||||
#define BOARD_USART_BASE USART1
|
||||
#define BOARD_ID_USART ID_USART1
|
||||
|
||||
// BlueTooth
|
||||
#define BT_USART UART1
|
||||
#define BT_ID ID_UART1
|
||||
|
||||
//------------------------------------------------------------------------------
|
||||
|
||||
|
||||
#define PIN_EBI_NANDOE {1 << 9, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_PULLUP}
|
||||
#define PIN_EBI_NANDWE {1 << 10, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_PULLUP}
|
||||
#define PIN_EBI_NANDCLE {1 << 17, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_PULLUP}
|
||||
#define PIN_EBI_NANDALE {1 << 16, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_PULLUP}
|
||||
#define PIN_EBI_NANDIO {0x000000FF, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_PULLUP}
|
||||
|
||||
/// Nandflash chip enable pin definition.
|
||||
#define BOARD_NF_CE_PIN {1 << 14, PIOC, ID_PIOC, PIO_OUTPUT_1, PIO_DEFAULT}
|
||||
/// Nandflash ready/busy pin definition.
|
||||
#define BOARD_NF_RB_PIN {1 << 18, PIOC, ID_PIOC, PIO_INPUT, PIO_PULLUP}
|
||||
|
||||
/// Nandflash controller peripheral pins definition.
|
||||
#define PINS_NANDFLASH PIN_EBI_NANDIO, BOARD_NF_CE_PIN, BOARD_NF_RB_PIN, PIN_EBI_NANDOE, \
|
||||
PIN_EBI_NANDWE, PIN_EBI_NANDCLE, PIN_EBI_NANDALE
|
||||
|
||||
/// Address for transferring command bytes to the nandflash.
|
||||
#define BOARD_NF_COMMAND_ADDR 0x60400000
|
||||
/// Address for transferring address bytes to the nandflash.
|
||||
#define BOARD_NF_ADDRESS_ADDR 0x60200000
|
||||
/// Address for transferring data bytes to the nandflash.
|
||||
#define BOARD_NF_DATA_ADDR 0x60000000
|
||||
|
||||
extern uint32_t Master_frequency ;
|
||||
|
||||
struct t_serial_tx
|
||||
{
|
||||
uint8_t *buffer ;
|
||||
uint16_t size ;
|
||||
volatile uint16_t ready ;
|
||||
};
|
||||
|
||||
#endif // _BOARD_H_
|
||||
@@ -1,313 +0,0 @@
|
||||
/*
|
||||
* Copyright (C) OpenTX
|
||||
*
|
||||
* Based on code named
|
||||
* th9x - http://code.google.com/p/th9x
|
||||
* er9x - http://code.google.com/p/er9x
|
||||
* gruvin9x - http://code.google.com/p/gruvin9x
|
||||
*
|
||||
* License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#ifndef _BOARD_SKY9X_H_
|
||||
#define _BOARD_SKY9X_H_
|
||||
|
||||
#include <stdio.h>
|
||||
#include "board.h"
|
||||
#include "audio_driver.h"
|
||||
|
||||
extern uint16_t ResetReason;
|
||||
|
||||
#define BOOTLOADER_SIZE 0x8000
|
||||
#define FIRMWARE_SIZE (256*1024)
|
||||
#define FIRMWARE_ADDRESS 0x00400000
|
||||
|
||||
// Board driver
|
||||
void boardInit(void);
|
||||
#define boardOff() pwrOff()
|
||||
|
||||
// Keys
|
||||
#if defined(REVA)
|
||||
#define KEYS_GPIO_REG_MENU PIOB->PIO_PDSR
|
||||
#define KEYS_GPIO_REG_EXIT PIOA->PIO_PDSR
|
||||
#define KEYS_GPIO_REG_UP PIOC->PIO_PDSR
|
||||
#define KEYS_GPIO_REG_DOWN PIOC->PIO_PDSR
|
||||
#define KEYS_GPIO_REG_RIGHT PIOC->PIO_PDSR
|
||||
#define KEYS_GPIO_REG_LEFT PIOC->PIO_PDSR
|
||||
#define KEYS_GPIO_PIN_MENU 0x00000040
|
||||
#define KEYS_GPIO_PIN_EXIT 0x80000000
|
||||
#define KEYS_GPIO_PIN_UP 0x00000004
|
||||
#define KEYS_GPIO_PIN_DOWN 0x00000008
|
||||
#define KEYS_GPIO_PIN_RIGHT 0x00000010
|
||||
#define KEYS_GPIO_PIN_LEFT 0x00000020
|
||||
#else
|
||||
#define KEYS_GPIO_REG_MENU PIOB->PIO_PDSR
|
||||
#define KEYS_GPIO_REG_EXIT PIOC->PIO_PDSR
|
||||
#define KEYS_GPIO_REG_UP PIOC->PIO_PDSR
|
||||
#define KEYS_GPIO_REG_DOWN PIOC->PIO_PDSR
|
||||
#define KEYS_GPIO_REG_RIGHT PIOC->PIO_PDSR
|
||||
#define KEYS_GPIO_REG_LEFT PIOC->PIO_PDSR
|
||||
#define KEYS_GPIO_PIN_MENU 0x00000020
|
||||
#define KEYS_GPIO_PIN_EXIT 0x01000000
|
||||
#define KEYS_GPIO_PIN_UP 0x00000002
|
||||
#define KEYS_GPIO_PIN_DOWN 0x00000020
|
||||
#define KEYS_GPIO_PIN_RIGHT 0x00000010
|
||||
#define KEYS_GPIO_PIN_LEFT 0x00000008
|
||||
#endif
|
||||
|
||||
#if defined(REVX)
|
||||
#define TRIMS_GPIO_REG_LHL PIOB->PIO_PDSR
|
||||
#define TRIMS_GPIO_REG_LVD PIOA->PIO_PDSR
|
||||
#define TRIMS_GPIO_REG_RVU PIOC->PIO_PDSR
|
||||
#define TRIMS_GPIO_REG_RHL PIOA->PIO_PDSR
|
||||
#define TRIMS_GPIO_REG_LHR PIOA->PIO_PDSR
|
||||
#define TRIMS_GPIO_REG_LVU PIOC->PIO_PDSR
|
||||
#define TRIMS_GPIO_REG_RVD PIOA->PIO_PDSR
|
||||
#define TRIMS_GPIO_REG_RHR PIOC->PIO_PDSR
|
||||
#else
|
||||
#define TRIMS_GPIO_REG_LHL PIOA->PIO_PDSR
|
||||
#define TRIMS_GPIO_REG_LVD PIOA->PIO_PDSR
|
||||
#define TRIMS_GPIO_REG_RVU PIOA->PIO_PDSR
|
||||
#define TRIMS_GPIO_REG_RHL PIOA->PIO_PDSR
|
||||
#define TRIMS_GPIO_REG_LHR PIOB->PIO_PDSR
|
||||
#define TRIMS_GPIO_REG_LVU PIOC->PIO_PDSR
|
||||
#define TRIMS_GPIO_REG_RVD PIOC->PIO_PDSR
|
||||
#define TRIMS_GPIO_REG_RHR PIOC->PIO_PDSR
|
||||
#endif
|
||||
|
||||
#if defined(REVX)
|
||||
#define TRIMS_GPIO_PIN_LHL 0x00000010
|
||||
#define TRIMS_GPIO_PIN_LVD 0x01000000
|
||||
#define TRIMS_GPIO_PIN_RVU 0x00000400
|
||||
#define TRIMS_GPIO_PIN_RHL 0x00000001
|
||||
#define TRIMS_GPIO_PIN_LHR 0x00800000
|
||||
#define TRIMS_GPIO_PIN_LVU 0x10000000
|
||||
#define TRIMS_GPIO_PIN_RVD 0x00000002
|
||||
#define TRIMS_GPIO_PIN_RHR 0x00000200
|
||||
#elif defined(REVA)
|
||||
#define TRIMS_GPIO_PIN_LHL 0x00000080
|
||||
#define TRIMS_GPIO_PIN_LVD 0x08000000
|
||||
#define TRIMS_GPIO_PIN_RVU 0x40000000
|
||||
#define TRIMS_GPIO_PIN_RHL 0x20000000
|
||||
#define TRIMS_GPIO_PIN_LHR 0x00000010
|
||||
#define TRIMS_GPIO_PIN_LVU 0x10000000
|
||||
#define TRIMS_GPIO_PIN_RVD 0x00000400
|
||||
#define TRIMS_GPIO_PIN_RHR 0x00000200
|
||||
#else
|
||||
#define TRIMS_GPIO_PIN_LHL 0x00800000
|
||||
#define TRIMS_GPIO_PIN_LVD 0x01000000
|
||||
#define TRIMS_GPIO_PIN_RVU 0x00000002
|
||||
#define TRIMS_GPIO_PIN_RHL 0x00000001
|
||||
#define TRIMS_GPIO_PIN_LHR 0x00000010
|
||||
#define TRIMS_GPIO_PIN_LVU 0x10000000
|
||||
#define TRIMS_GPIO_PIN_RVD 0x00000400
|
||||
#define TRIMS_GPIO_PIN_RHR 0x00000200
|
||||
#endif
|
||||
|
||||
void usbMassStorage();
|
||||
|
||||
#define PIN_ENABLE 0x001
|
||||
#define PIN_PERIPHERAL 0x000
|
||||
#define PIN_INPUT 0x002
|
||||
#define PIN_OUTPUT 0x000
|
||||
#define PIN_PULLUP 0x004
|
||||
#define PIN_NO_PULLUP 0x000
|
||||
#define PIN_PULLDOWN 0x008
|
||||
#define PIN_NO_PULLDOWN 0x000
|
||||
#define PIN_PERI_MASK_L 0x010
|
||||
#define PIN_PERI_MASK_H 0x020
|
||||
#define PIN_PER_A 0x000
|
||||
#define PIN_PER_B 0x010
|
||||
#define PIN_PER_C 0x020
|
||||
#define PIN_PER_D 0x030
|
||||
#define PIN_PORT_MASK 0x0C0
|
||||
#define PIN_PORTA 0x000
|
||||
#define PIN_PORTB 0x040
|
||||
#define PIN_PORTC 0x080
|
||||
#define PIN_LOW 0x000
|
||||
#define PIN_HIGH 0x100
|
||||
|
||||
// Telemetry port
|
||||
#define SECOND_USART USART0
|
||||
#define SECOND_ID ID_USART0
|
||||
#define SECOND_PINS { PINS_USART0 }
|
||||
|
||||
void configure_pins( uint32_t pins, uint16_t config );
|
||||
uint16_t getCurrent();
|
||||
|
||||
extern uint8_t temperature ; // Raw temp reading
|
||||
extern uint8_t maxTemperature ; // Raw temp reading
|
||||
uint8_t getTemperature();
|
||||
|
||||
#define strcpy_P strcpy
|
||||
#define strcat_P strcat
|
||||
|
||||
#if !defined(REVA)
|
||||
extern uint16_t Current_analogue;
|
||||
extern uint16_t Current_max;
|
||||
extern uint32_t Current_accumulator;
|
||||
extern uint32_t Current_used;
|
||||
extern uint16_t sessionTimer;
|
||||
void calcConsumption();
|
||||
#endif
|
||||
|
||||
// Trainer driver
|
||||
#define SLAVE_MODE() (pwrCheck() == e_power_trainer)
|
||||
void checkTrainerSettings();
|
||||
void init_trainer_capture();
|
||||
|
||||
// Write Flash driver
|
||||
#define FLASH_PAGESIZE 256
|
||||
void writeFlash(uint32_t * address, uint32_t * buffer);
|
||||
|
||||
// Keys driver
|
||||
extern uint32_t readKeys();
|
||||
extern uint32_t readTrims();
|
||||
#define TRIMS_PRESSED() readTrims()
|
||||
#define KEYS_PRESSED() readKeys()
|
||||
|
||||
// Pulses driver
|
||||
void init_no_pulses(uint32_t port);
|
||||
void disable_no_pulses(uint32_t port);
|
||||
void init_ppm(uint32_t port);
|
||||
void disable_ppm(uint32_t port);
|
||||
void init_pxx(uint32_t port);
|
||||
void disable_pxx(uint32_t port);
|
||||
void init_dsm2(uint32_t port);
|
||||
void disable_dsm2(uint32_t port);
|
||||
|
||||
// SD driver
|
||||
#if defined(SIMU)
|
||||
#define sdInit()
|
||||
#define sdDone()
|
||||
#else
|
||||
#define sdPoll10ms()
|
||||
void sdMountPoll();
|
||||
extern "C" {
|
||||
void init_SDcard();
|
||||
void sdInit();
|
||||
void sdDone();
|
||||
uint32_t sd_card_ready();
|
||||
uint32_t sdMounted();
|
||||
}
|
||||
#endif
|
||||
|
||||
// WDT driver
|
||||
#if defined(SIMU)
|
||||
#define wdt_disable()
|
||||
#define wdt_enable(x)
|
||||
#define wdt_reset()
|
||||
#else
|
||||
#define wdt_disable()
|
||||
#define wdt_enable(x) WDT->WDT_MR = 0x3FFF207F
|
||||
#define wdt_reset() WDT->WDT_CR = 0xA5000001
|
||||
#endif
|
||||
|
||||
// Backlight driver
|
||||
#define setBacklight(xx) (PWM->PWM_CH_NUM[0].PWM_CDTYUPD = xx)
|
||||
#define backlightEnable() (PWM->PWM_CH_NUM[0].PWM_CDTY = g_eeGeneral.backlightBright)
|
||||
#define backlightDisable() (PWM->PWM_CH_NUM[0].PWM_CDTY = 100)
|
||||
#define isBacklightEnable() (PWM->PWM_CH_NUM[0].PWM_CDTY != 100)
|
||||
|
||||
// ADC driver
|
||||
enum Analogs {
|
||||
STICK1,
|
||||
STICK2,
|
||||
STICK3,
|
||||
STICK4,
|
||||
POT1,
|
||||
POT2,
|
||||
POT3,
|
||||
POT_LAST = POT3,
|
||||
TX_VOLTAGE,
|
||||
#if !defined(REVA)
|
||||
TX_CURRENT,
|
||||
#endif
|
||||
NUMBER_ANALOG
|
||||
};
|
||||
void adcInit();
|
||||
void adcRead(void);
|
||||
uint16_t getAnalogValue(uint8_t index);
|
||||
uint16_t getBatteryVoltage(); // returns current battery voltage in 10mV steps
|
||||
void setSticksGain(uint8_t gains);
|
||||
|
||||
// Buzzer driver
|
||||
void buzzerSound(uint8_t duration);
|
||||
void buzzerHeartbeat();
|
||||
#define BUZZER_HEARTBEAT buzzerHeartbeat
|
||||
|
||||
// i2c driver
|
||||
void i2cCheck();
|
||||
|
||||
// Coproc driver
|
||||
void coprocInit();
|
||||
void coprocWriteData(uint8_t *data, uint32_t size);
|
||||
void coprocReadData(bool onlytemp=false);
|
||||
extern int8_t volumeRequired;
|
||||
extern uint8_t Coproc_read;
|
||||
extern int8_t Coproc_valid;
|
||||
extern int8_t Coproc_temp;
|
||||
extern int8_t Coproc_maxtemp;
|
||||
|
||||
// Haptic driver
|
||||
void hapticOff(void);
|
||||
void hapticOn(uint32_t pwmPercent);
|
||||
|
||||
// BlueTooth driver
|
||||
#if defined(BLUETOOTH)
|
||||
void btInit();
|
||||
void btTask(void* pdata);
|
||||
void btPushByte(uint8_t data);
|
||||
#endif
|
||||
|
||||
// Power driver
|
||||
void pwrInit();
|
||||
void pwrOff();
|
||||
uint32_t pwrCheck();
|
||||
uint32_t pwroffPressed();
|
||||
#define UNEXPECTED_SHUTDOWN() (g_eeGeneral.unexpectedShutdown)
|
||||
|
||||
// EEPROM driver
|
||||
void eepromInit();
|
||||
uint32_t eepromReadStatus();
|
||||
extern volatile uint32_t Spi_complete;
|
||||
void eepromWriteEnable();
|
||||
void eepromBlockErase(uint32_t address);
|
||||
void eepromReadArray(uint32_t address, uint8_t * buffer, uint32_t size);
|
||||
void eepromByteProgram(uint32_t address, uint8_t * buffer, uint32_t size);
|
||||
|
||||
// Rotary Encoder driver
|
||||
void rotencInit();
|
||||
void rotencEnd();
|
||||
|
||||
#if ROTARY_ENCODERS > 0
|
||||
#define REA_DOWN() (!(PIOB->PIO_PDSR & 0x40))
|
||||
#else
|
||||
#define REA_DOWN() (0)
|
||||
#endif
|
||||
|
||||
// Debug driver
|
||||
void debugPutc(const char c);
|
||||
|
||||
// Telemetry driver
|
||||
void telemetryPortInit(uint32_t baudrate, int mode);
|
||||
uint32_t telemetryTransmitPending();
|
||||
void telemetryTransmitBuffer(uint8_t * buffer, uint32_t size);
|
||||
void rxPdcUsart( void (*pChProcess)(uint8_t x) );
|
||||
|
||||
// Second UART driver
|
||||
void serial2TelemetryInit(unsigned int protocol);
|
||||
bool telemetrySecondPortReceive(uint8_t & data);
|
||||
|
||||
extern const uint8_t BootCode[];
|
||||
|
||||
#endif // _BOARD_SKY9X_H_
|
||||
@@ -20,7 +20,7 @@
|
||||
|
||||
#include "i2c_driver.h"
|
||||
#include "twi.h"
|
||||
#include "board.h"
|
||||
#include "board_lowlevel.h"
|
||||
#include "stdlib.h"
|
||||
|
||||
#define I2C_CLK_FAST 400000
|
||||
|
||||
@@ -42,7 +42,7 @@
|
||||
#ifndef USBDEVICEDESCRIPTOR_H
|
||||
#define USBDEVICEDESCRIPTOR_H
|
||||
|
||||
#include "../../../board.h"
|
||||
#include "board_lowlevel.h"
|
||||
//------------------------------------------------------------------------------
|
||||
// Definitions
|
||||
//------------------------------------------------------------------------------
|
||||
|
||||
@@ -39,7 +39,7 @@
|
||||
//------------------------------------------------------------------------------
|
||||
#include <exceptions.h>
|
||||
|
||||
#include "../../../board.h"
|
||||
#include "radio/src/targets/sky9x/board_lowlevel.h"
|
||||
#include "../../../usb/device/core/USBD.h"
|
||||
|
||||
//------------------------------------------------------------------------------
|
||||
|
||||
@@ -42,7 +42,7 @@
|
||||
#include "../../../usb/common/core/USBSetAddressRequest.h"
|
||||
#include "../../../usb/common/core/USBSetConfigurationRequest.h"
|
||||
#include "../../../usb/device/core/USBD.h"
|
||||
#include "../../../board.h"
|
||||
#include "board_lowlevel.h"
|
||||
#include "../../../usb/common/core/USBConfigurationDescriptor.h"
|
||||
#include "../../../usb/common/core/USBDeviceDescriptor.h"
|
||||
#include "../../../usb/common/core/USBDeviceQualifierDescriptor.h"
|
||||
|
||||
@@ -41,7 +41,7 @@
|
||||
// Headers
|
||||
//------------------------------------------------------------------------------
|
||||
|
||||
#include "../../../board.h"
|
||||
#include "board_lowlevel.h"
|
||||
#include "../../../usb/common/core/USBEndpointDescriptor.h"
|
||||
#include "../../../usb/common/core/USBGenericRequest.h"
|
||||
#include "../../../usb/device/core/USBD.h"
|
||||
|
||||
@@ -36,7 +36,7 @@
|
||||
#include "../../../usb/common/core/USBStringDescriptor.h"
|
||||
#include "../../../usb/common/massstorage/MSDeviceDescriptor.h"
|
||||
#include "../../../usb/common/massstorage/MSInterfaceDescriptor.h"
|
||||
#include "../../../board.h"
|
||||
#include "board_lowlevel.h"
|
||||
#include "../../../usb/common/core/USBConfigurationDescriptor.h"
|
||||
#include "../../../usb/common/core/USBDeviceDescriptor.h"
|
||||
#include "../../../usb/common/core/USBEndpointDescriptor.h"
|
||||
|
||||
@@ -1,14 +1,15 @@
|
||||
option(PCBREV "PCB Revision" REVPLUS)
|
||||
option(SHUTDOWN_CONFIRMATION "Shutdown confirmation" OFF)
|
||||
option(LCD_DUAL_BUFFER "Dual LCD Buffer" OFF)
|
||||
option(TARANIS_INTERNAL_PPM "Taranis internal module hack to output PPM" OFF)
|
||||
if(PCBREV STREQUAL REV9E)
|
||||
add_definitions(-DUSB_NAME="FrSky Taranis")
|
||||
|
||||
if(PCB STREQUAL X9E)
|
||||
option(STICKS "Sticks type" STANDARD)
|
||||
set(CPU_TYPE STM32F4)
|
||||
set(LINKER_SCRIPT targets/taranis/stm32f4_flash.ld)
|
||||
set(HAPTIC YES)
|
||||
set(LUA_EXPORT lua_export_taranis_x9e)
|
||||
set(FLAVOUR taranisx9e)
|
||||
set(FLAVOUR x9e)
|
||||
add_definitions(-DSTM32F40_41xxx -DREVPLUS -DREV9E)
|
||||
add_definitions(-DEEPROM_VARIANT=32768)
|
||||
set(FIRMWARE_TARGET_SRC
|
||||
@@ -20,36 +21,68 @@ if(PCBREV STREQUAL REV9E)
|
||||
if(STICKS STREQUAL HORUS)
|
||||
add_definitions(-DHORUS_STICKS)
|
||||
endif()
|
||||
elseif(PCBREV STREQUAL REVPLUS)
|
||||
set(GUI_DIR 212x64)
|
||||
set(GUI_SRC ${GUI_SRC} bmp.cpp)
|
||||
set(FIRMWARE_DEPENDENCIES ${FIRMWARE_DEPENDENCIES} taranis_bitmaps)
|
||||
set(VIRTUAL_INPUTS YES)
|
||||
elseif(PCB STREQUAL X9D+)
|
||||
set(CPU_TYPE STM32F2)
|
||||
set(LINKER_SCRIPT targets/taranis/stm32f2_flash.ld)
|
||||
set(HAPTIC YES)
|
||||
set(LUA_EXPORT lua_export_taranis)
|
||||
set(FLAVOUR taranisplus)
|
||||
set(FLAVOUR x9d+)
|
||||
add_definitions(-DREVPLUS)
|
||||
add_definitions(-DEEPROM_VARIANT=0)
|
||||
else()
|
||||
set(GUI_DIR 212x64)
|
||||
set(GUI_SRC ${GUI_SRC} bmp.cpp)
|
||||
set(FIRMWARE_DEPENDENCIES ${FIRMWARE_DEPENDENCIES} taranis_bitmaps)
|
||||
set(VIRTUAL_INPUTS YES)
|
||||
elseif(PCB STREQUAL X9D)
|
||||
set(CPU_TYPE STM32F2)
|
||||
set(LINKER_SCRIPT targets/taranis/stm32f2_flash.ld)
|
||||
set(HAPTIC NO)
|
||||
set(LUA_EXPORT lua_export_taranis)
|
||||
set(FLAVOUR taranis)
|
||||
set(FLAVOUR x9d)
|
||||
add_definitions(-DEEPROM_VARIANT=0)
|
||||
set(GUI_DIR 212x64)
|
||||
set(GUI_SRC ${GUI_SRC} bmp.cpp)
|
||||
set(FIRMWARE_DEPENDENCIES ${FIRMWARE_DEPENDENCIES} taranis_bitmaps)
|
||||
set(VIRTUAL_INPUTS YES)
|
||||
elseif(PCB STREQUAL X7D)
|
||||
set(CPU_TYPE STM32F2)
|
||||
set(LINKER_SCRIPT targets/taranis/stm32f2_flash.ld)
|
||||
set(HAPTIC NO)
|
||||
set(LUA_EXPORT lua_export_taranis)
|
||||
set(FLAVOUR x7d)
|
||||
add_definitions(-DPCBX7D)
|
||||
add_definitions(-DEEPROM_VARIANT=0)
|
||||
set(GUI_DIR 128x64)
|
||||
set(FIRMWARE_DEPENDENCIES ${FIRMWARE_DEPENDENCIES} 9x_bitmaps)
|
||||
set(VIRTUAL_INPUTS NO)
|
||||
endif()
|
||||
|
||||
set(HSE_VALUE 12000000)
|
||||
set(SDCARD YES)
|
||||
set(EEPROM EEPROM_RLC)
|
||||
set(GUI_DIR taranis)
|
||||
set(TARGET_DIR taranis)
|
||||
set(FIRMWARE_DEPENDENCIES ${FIRMWARE_DEPENDENCIES} taranis_bitmaps)
|
||||
set(VIRTUAL_INPUTS YES)
|
||||
add_definitions(-DPCBTARANIS -DPPM_PIN_TIMER)
|
||||
add_definitions(-DAUDIO -DVOICE -DRTCLOCK)
|
||||
add_definitions(-DVIRTUALINPUTS -DLUAINPUTS -DXCURVES -DVARIO)
|
||||
set(GUI_SRC ${GUI_SRC} bmp.cpp menu_model_inputs.cpp menu_model_mixes.cpp menu_model_display.cpp menu_general_diagkeys.cpp menu_general_diaganas.cpp menu_general_hardware.cpp view_channels.cpp view_telemetry.cpp view_text.cpp view_about.cpp)
|
||||
set(GUI_SRC ${GUI_SRC}
|
||||
model_inputs.cpp
|
||||
model_mixes.cpp
|
||||
model_display.cpp
|
||||
radio_diagkeys.cpp
|
||||
radio_diaganas.cpp
|
||||
radio_hardware.cpp
|
||||
view_channels.cpp
|
||||
view_telemetry.cpp
|
||||
view_text.cpp
|
||||
view_about.cpp
|
||||
)
|
||||
set(TARGET_SRC
|
||||
${TARGET_SRC}
|
||||
board_taranis.cpp
|
||||
board.cpp
|
||||
extmodule_driver.cpp
|
||||
rtc_driver.cpp
|
||||
)
|
||||
@@ -62,7 +95,6 @@ set(FIRMWARE_TARGET_SRC
|
||||
lcd_driver.cpp
|
||||
delays.c
|
||||
i2c_driver.cpp
|
||||
usb_driver.c
|
||||
pwr_driver.c
|
||||
configure_pins.cpp
|
||||
flash_driver.cpp
|
||||
|
||||
@@ -1,24 +1,24 @@
|
||||
/*
|
||||
* Copyright (C) OpenTX
|
||||
*
|
||||
* Based on code named
|
||||
* th9x - http://code.google.com/p/th9x
|
||||
* er9x - http://code.google.com/p/er9x
|
||||
* gruvin9x - http://code.google.com/p/gruvin9x
|
||||
*
|
||||
* License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#include "board_taranis.h"
|
||||
/*
|
||||
* Copyright (C) OpenTX
|
||||
*
|
||||
* Based on code named
|
||||
* th9x - http://code.google.com/p/th9x
|
||||
* er9x - http://code.google.com/p/er9x
|
||||
* gruvin9x - http://code.google.com/p/gruvin9x
|
||||
*
|
||||
* License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#include "board.h"
|
||||
|
||||
/**
|
||||
**********send command to lcd**************
|
||||
|
||||
@@ -117,11 +117,11 @@ extern "C" void INTERRUPT_5MS_IRQHandler()
|
||||
#define PWR_PRESS_DURATION_MAX 500 // 5s
|
||||
|
||||
const pm_uchar bmp_startup[] PROGMEM = {
|
||||
#include "../../bitmaps/taranis/startup.lbm"
|
||||
#include "../../bitmaps/212x64/startup.lbm"
|
||||
};
|
||||
|
||||
const pm_uchar bmp_lock[] PROGMEM = {
|
||||
#include "../../bitmaps/taranis/lock.lbm"
|
||||
#include "../../bitmaps/212x64/lock.lbm"
|
||||
};
|
||||
#endif
|
||||
|
||||
@@ -2,10 +2,10 @@
|
||||
|
||||
set(CMAKE_RUNTIME_OUTPUT_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR})
|
||||
|
||||
if(PCBREV STREQUAL REV9E)
|
||||
if(PCB STREQUAL X9E)
|
||||
set(BOOTLOADER_SRC
|
||||
${BOOTLOADER_SRC}
|
||||
../system_stm32f4xx.c
|
||||
../../common/arm/stm32/f4/system_stm32f4xx.c
|
||||
../../../${STM32LIB_DIR}/CMSIS/Device/ST/STM32F4xx/Source/Templates/gcc_ride7/startup_stm32f40_41xxx.s
|
||||
../../../${STM32LIB_DIR}/STM32F4xx_StdPeriph_Driver/src/stm32f4xx_rcc.c
|
||||
../../../${STM32LIB_DIR}/STM32F4xx_StdPeriph_Driver/src/stm32f4xx_gpio.c
|
||||
@@ -16,7 +16,7 @@ if(PCBREV STREQUAL REV9E)
|
||||
else()
|
||||
set(BOOTLOADER_SRC
|
||||
${BOOTLOADER_SRC}
|
||||
../system_stm32f2xx.c
|
||||
../../common/arm/stm32/f2/system_stm32f2xx.c
|
||||
../../../${STM32LIB_DIR}/CMSIS/Device/ST/STM32F2xx/Source/Templates/gcc_ride7/startup_stm32f2xx.s
|
||||
../../../${STM32LIB_DIR}/STM32F2xx_StdPeriph_Driver/src/stm32f2xx_rcc.c
|
||||
../../../${STM32LIB_DIR}/STM32F2xx_StdPeriph_Driver/src/stm32f2xx_gpio.c
|
||||
@@ -28,8 +28,8 @@ endif()
|
||||
|
||||
set(BOOTLOADER_SRC
|
||||
${BOOTLOADER_SRC}
|
||||
../../../gui/taranis/lcd.cpp
|
||||
../../../gui/taranis/fonts.cpp
|
||||
../../../gui/212x64/lcd.cpp
|
||||
../../../gui/212x64/fonts.cpp
|
||||
../../../keys.cpp
|
||||
../../../strhelpers.cpp
|
||||
../../../${STM32USB_DIR}/STM32_USB_OTG_Driver/src/usb_core.c
|
||||
@@ -50,13 +50,13 @@ set(BOOTLOADER_SRC
|
||||
../i2c_driver.cpp
|
||||
../flash_driver.cpp
|
||||
../diskio.cpp
|
||||
../usbd_usr.cpp
|
||||
../../common/arm/stm32/usbd_usr.cpp
|
||||
../usbd_storage_msd.cpp
|
||||
../delays.c
|
||||
../usbd_desc.c
|
||||
../../common/arm/stm32/usbd_desc.c
|
||||
../aspi.c
|
||||
../usb_bsp.c
|
||||
../usb_driver.c
|
||||
../../common/arm/stm32/usb_bsp.c
|
||||
../../common/arm/stm32/usb_driver.c
|
||||
../pwr_driver.c
|
||||
init.c
|
||||
boot.cpp
|
||||
|
||||
@@ -53,8 +53,8 @@
|
||||
#include <stdlib.h>
|
||||
#include <string.h>
|
||||
|
||||
#include "../../../gui/taranis/lcd.h"
|
||||
#include "../../taranis/board_taranis.h"
|
||||
#include "../../../gui/212x64/lcd.h"
|
||||
#include "board.h"
|
||||
#include "storage/eeprom_rlc.h"
|
||||
#include "pwr.h"
|
||||
#include "keys.h"
|
||||
|
||||
@@ -19,7 +19,7 @@
|
||||
*/
|
||||
|
||||
#include <OsConfig.h>
|
||||
#include "board_taranis.h"
|
||||
#include "board.h"
|
||||
#if !defined(REV9E)
|
||||
#include "dwt.h" // the old ST library that we use does not define DWT register for STM32F2xx
|
||||
#endif
|
||||
|
||||
@@ -18,7 +18,7 @@
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#include "board_taranis.h"
|
||||
#include "board.h"
|
||||
|
||||
void eepromPageWrite(uint8_t* pBuffer, uint16_t WriteAddr, uint8_t NumByteToWrite);
|
||||
void eepromWaitEepromStandbyState(void);
|
||||
|
||||
@@ -19,7 +19,7 @@
|
||||
*/
|
||||
|
||||
#include "pwr.h"
|
||||
#include "board_taranis.h"
|
||||
#include "board.h"
|
||||
|
||||
void pwrInit()
|
||||
{
|
||||
|
||||
@@ -1,473 +0,0 @@
|
||||
/*
|
||||
* Copyright (C) OpenTX
|
||||
*
|
||||
* Based on code named
|
||||
* th9x - http://code.google.com/p/th9x
|
||||
* er9x - http://code.google.com/p/er9x
|
||||
* gruvin9x - http://code.google.com/p/gruvin9x
|
||||
*
|
||||
* License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
/** @addtogroup CMSIS
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup stm32f4xx_system
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F4xx_System_Private_Includes
|
||||
* @{
|
||||
*/
|
||||
|
||||
#include "stm32f4xx.h"
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F4xx_System_Private_TypesDefinitions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F4xx_System_Private_Defines
|
||||
* @{
|
||||
*/
|
||||
|
||||
/************************* Miscellaneous Configuration ************************/
|
||||
/*!< Uncomment the following line if you need to use external SRAM mounted
|
||||
on STM324xG_EVAL/STM324x7I_EVAL board as data memory */
|
||||
/* #define DATA_IN_ExtSRAM */
|
||||
|
||||
/*!< Uncomment the following line if you need to relocate your vector Table in
|
||||
Internal SRAM. */
|
||||
/* #define VECT_TAB_SRAM */
|
||||
#define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field.
|
||||
This value must be a multiple of 0x200. */
|
||||
/******************************************************************************/
|
||||
|
||||
/************************* PLL Parameters *************************************/
|
||||
/* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N */
|
||||
#define PLL_M 12
|
||||
#define PLL_N 336
|
||||
|
||||
/* SYSCLK = PLL_VCO / PLL_P */
|
||||
#define PLL_P 2
|
||||
|
||||
/* USB OTG FS, SDIO and RNG Clock = PLL_VCO / PLLQ */
|
||||
#define PLL_Q 7
|
||||
|
||||
/******************************************************************************/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F4xx_System_Private_Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F4xx_System_Private_Variables
|
||||
* @{
|
||||
*/
|
||||
|
||||
uint32_t SystemCoreClock = 168000000;
|
||||
|
||||
__I uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F4xx_System_Private_FunctionPrototypes
|
||||
* @{
|
||||
*/
|
||||
|
||||
static void SetSysClock(void);
|
||||
#ifdef DATA_IN_ExtSRAM
|
||||
static void SystemInit_ExtMemCtl(void);
|
||||
#endif /* DATA_IN_ExtSRAM */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F4xx_System_Private_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Setup the microcontroller system
|
||||
* Initialize the Embedded Flash Interface, the PLL and update the
|
||||
* SystemFrequency variable.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SystemInit(void)
|
||||
{
|
||||
/* FPU settings ------------------------------------------------------------*/
|
||||
#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
|
||||
SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2)); /* set CP10 and CP11 Full Access */
|
||||
#endif
|
||||
/* Reset the RCC clock configuration to the default reset state ------------*/
|
||||
/* Set HSION bit */
|
||||
RCC->CR |= (uint32_t)0x00000001;
|
||||
|
||||
/* Reset CFGR register */
|
||||
RCC->CFGR = 0x00000000;
|
||||
|
||||
/* Reset HSEON, CSSON and PLLON bits */
|
||||
RCC->CR &= (uint32_t)0xFEF6FFFF;
|
||||
|
||||
/* Reset PLLCFGR register */
|
||||
RCC->PLLCFGR = 0x24003010;
|
||||
|
||||
/* Reset HSEBYP bit */
|
||||
RCC->CR &= (uint32_t)0xFFFBFFFF;
|
||||
|
||||
/* Disable all interrupts */
|
||||
RCC->CIR = 0x00000000;
|
||||
|
||||
#ifdef DATA_IN_ExtSRAM
|
||||
SystemInit_ExtMemCtl();
|
||||
#endif /* DATA_IN_ExtSRAM */
|
||||
|
||||
/* Configure the System clock source, PLL Multiplier and Divider factors,
|
||||
AHB/APBx prescalers and Flash settings ----------------------------------*/
|
||||
SetSysClock();
|
||||
|
||||
/* Configure the Vector Table location add offset address ------------------*/
|
||||
#ifdef VECT_TAB_SRAM
|
||||
SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
|
||||
#else
|
||||
// SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
|
||||
extern uint32_t g_pfnVectors ;
|
||||
SCB->VTOR = (uint32_t) &g_pfnVectors ; /* Vector Table Relocation in Internal FLASH */
|
||||
#endif
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Update SystemCoreClock variable according to Clock Register Values.
|
||||
* The SystemCoreClock variable contains the core clock (HCLK), it can
|
||||
* be used by the user application to setup the SysTick timer or configure
|
||||
* other parameters.
|
||||
*
|
||||
* @note Each time the core clock (HCLK) changes, this function must be called
|
||||
* to update SystemCoreClock variable value. Otherwise, any configuration
|
||||
* based on this variable will be incorrect.
|
||||
*
|
||||
* @note - The system frequency computed by this function is not the real
|
||||
* frequency in the chip. It is calculated based on the predefined
|
||||
* constant and the selected clock source:
|
||||
*
|
||||
* - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
|
||||
*
|
||||
* - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
|
||||
*
|
||||
* - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
|
||||
* or HSI_VALUE(*) multiplied/divided by the PLL factors.
|
||||
*
|
||||
* (*) HSI_VALUE is a constant defined in stm32f4xx.h file (default value
|
||||
* 16 MHz) but the real value may vary depending on the variations
|
||||
* in voltage and temperature.
|
||||
*
|
||||
* (**) HSE_VALUE is a constant defined in stm32f4xx.h file (default value
|
||||
* 25 MHz), user has to ensure that HSE_VALUE is same as the real
|
||||
* frequency of the crystal used. Otherwise, this function may
|
||||
* have wrong result.
|
||||
*
|
||||
* - The result of this function could be not correct when using fractional
|
||||
* value for HSE crystal.
|
||||
*
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SystemCoreClockUpdate(void)
|
||||
{
|
||||
uint32_t tmp = 0, pllvco = 0, pllp = 2, pllsource = 0, pllm = 2;
|
||||
|
||||
/* Get SYSCLK source -------------------------------------------------------*/
|
||||
tmp = RCC->CFGR & RCC_CFGR_SWS;
|
||||
|
||||
switch (tmp)
|
||||
{
|
||||
case 0x00: /* HSI used as system clock source */
|
||||
SystemCoreClock = HSI_VALUE;
|
||||
break;
|
||||
case 0x04: /* HSE used as system clock source */
|
||||
SystemCoreClock = HSE_VALUE;
|
||||
break;
|
||||
case 0x08: /* PLL used as system clock source */
|
||||
|
||||
/* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N
|
||||
SYSCLK = PLL_VCO / PLL_P
|
||||
*/
|
||||
pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22;
|
||||
pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
|
||||
|
||||
if (pllsource != 0)
|
||||
{
|
||||
/* HSE used as PLL clock source */
|
||||
pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
|
||||
}
|
||||
else
|
||||
{
|
||||
/* HSI used as PLL clock source */
|
||||
pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
|
||||
}
|
||||
|
||||
pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2;
|
||||
SystemCoreClock = pllvco/pllp;
|
||||
break;
|
||||
default:
|
||||
SystemCoreClock = HSI_VALUE;
|
||||
break;
|
||||
}
|
||||
/* Compute HCLK frequency --------------------------------------------------*/
|
||||
/* Get HCLK prescaler */
|
||||
tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
|
||||
/* HCLK frequency */
|
||||
SystemCoreClock >>= tmp;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Configures the System clock source, PLL Multiplier and Divider factors,
|
||||
* AHB/APBx prescalers and Flash settings
|
||||
* @Note This function should be called only once the RCC clock configuration
|
||||
* is reset to the default reset state (done in SystemInit() function).
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void SetSysClock(void)
|
||||
{
|
||||
/******************************************************************************/
|
||||
/* PLL (clocked by HSE) used as System clock source */
|
||||
/******************************************************************************/
|
||||
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
|
||||
|
||||
/* Enable HSE */
|
||||
RCC->CR |= ((uint32_t)RCC_CR_HSEON);
|
||||
|
||||
/* Wait till HSE is ready and if Time out is reached exit */
|
||||
do
|
||||
{
|
||||
HSEStatus = RCC->CR & RCC_CR_HSERDY;
|
||||
StartUpCounter++;
|
||||
} while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
|
||||
|
||||
if ((RCC->CR & RCC_CR_HSERDY) != RESET)
|
||||
{
|
||||
HSEStatus = (uint32_t)0x01;
|
||||
}
|
||||
else
|
||||
{
|
||||
HSEStatus = (uint32_t)0x00;
|
||||
}
|
||||
|
||||
if (HSEStatus == (uint32_t)0x01)
|
||||
{
|
||||
/* Select regulator voltage output Scale 1 mode, System frequency up to 168 MHz */
|
||||
RCC->APB1ENR |= RCC_APB1ENR_PWREN;
|
||||
PWR->CR |= PWR_CR_VOS;
|
||||
|
||||
/* HCLK = SYSCLK / 1*/
|
||||
RCC->CFGR |= RCC_CFGR_HPRE_DIV1;
|
||||
|
||||
/* PCLK2 = HCLK / 2*/
|
||||
RCC->CFGR |= RCC_CFGR_PPRE2_DIV2;
|
||||
|
||||
/* PCLK1 = HCLK / 4*/
|
||||
RCC->CFGR |= RCC_CFGR_PPRE1_DIV4;
|
||||
|
||||
/* Configure the main PLL */
|
||||
RCC->PLLCFGR = PLL_M | (PLL_N << 6) | (((PLL_P >> 1) -1) << 16) |
|
||||
(RCC_PLLCFGR_PLLSRC_HSE) | (PLL_Q << 24);
|
||||
|
||||
/* Enable the main PLL */
|
||||
RCC->CR |= RCC_CR_PLLON;
|
||||
|
||||
/* Wait till the main PLL is ready */
|
||||
while((RCC->CR & RCC_CR_PLLRDY) == 0)
|
||||
{
|
||||
}
|
||||
|
||||
/* Configure Flash prefetch, Instruction cache, Data cache and wait state */
|
||||
FLASH->ACR = FLASH_ACR_PRFTEN |FLASH_ACR_ICEN |FLASH_ACR_DCEN |FLASH_ACR_LATENCY_5WS;
|
||||
|
||||
/* Select the main PLL as system clock source */
|
||||
RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
|
||||
RCC->CFGR |= RCC_CFGR_SW_PLL;
|
||||
|
||||
/* Wait till the main PLL is used as system clock source */
|
||||
while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS ) != RCC_CFGR_SWS_PLL);
|
||||
{
|
||||
}
|
||||
}
|
||||
else
|
||||
{ /* If HSE fails to start-up, the application will have wrong clock
|
||||
configuration. User can add here some code to deal with this error */
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Setup the external memory controller. Called in startup_stm32f4xx.s
|
||||
* before jump to __main
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
#ifdef DATA_IN_ExtSRAM
|
||||
/**
|
||||
* @brief Setup the external memory controller.
|
||||
* Called in startup_stm32f4xx.s before jump to main.
|
||||
* This function configures the external SRAM mounted on STM324xG_EVAL/STM324x7I_EVAL board
|
||||
* This SRAM will be used as program data memory (including heap and stack).
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SystemInit_ExtMemCtl(void)
|
||||
{
|
||||
/*-- GPIOs Configuration -----------------------------------------------------*/
|
||||
/*
|
||||
+-------------------+--------------------+------------------+------------------+
|
||||
+ SRAM pins assignment +
|
||||
+-------------------+--------------------+------------------+------------------+
|
||||
| PD0 <-> FSMC_D2 | PE0 <-> FSMC_NBL0 | PF0 <-> FSMC_A0 | PG0 <-> FSMC_A10 |
|
||||
| PD1 <-> FSMC_D3 | PE1 <-> FSMC_NBL1 | PF1 <-> FSMC_A1 | PG1 <-> FSMC_A11 |
|
||||
| PD4 <-> FSMC_NOE | PE2 <-> FSMC_A23 | PF2 <-> FSMC_A2 | PG2 <-> FSMC_A12 |
|
||||
| PD5 <-> FSMC_NWE | PE3 <-> FSMC_A19 | PF3 <-> FSMC_A3 | PG3 <-> FSMC_A13 |
|
||||
| PD8 <-> FSMC_D13 | PE4 <-> FSMC_A20 | PF4 <-> FSMC_A4 | PG4 <-> FSMC_A14 |
|
||||
| PD9 <-> FSMC_D14 | PE5 <-> FSMC_A21 | PF5 <-> FSMC_A5 | PG5 <-> FSMC_A15 |
|
||||
| PD10 <-> FSMC_D15 | PE6 <-> FSMC_A22 | PF12 <-> FSMC_A6 | PG9 <-> FSMC_NE2 |
|
||||
| PD11 <-> FSMC_A16 | PE7 <-> FSMC_D4 | PF13 <-> FSMC_A7 |------------------+
|
||||
| PD12 <-> FSMC_A17 | PE8 <-> FSMC_D5 | PF14 <-> FSMC_A8 |
|
||||
| PD13 <-> FSMC_A18 | PE9 <-> FSMC_D6 | PF15 <-> FSMC_A9 |
|
||||
| PD14 <-> FSMC_D0 | PE10 <-> FSMC_D7 |------------------+
|
||||
| PD15 <-> FSMC_D1 | PE11 <-> FSMC_D8 |
|
||||
+-------------------| PE12 <-> FSMC_D9 |
|
||||
| PE13 <-> FSMC_D10 |
|
||||
| PE14 <-> FSMC_D11 |
|
||||
| PE15 <-> FSMC_D12 |
|
||||
+--------------------+
|
||||
*/
|
||||
/* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */
|
||||
RCC->AHB1ENR |= 0x00000078;
|
||||
|
||||
/* Connect PDx pins to FSMC Alternate function */
|
||||
GPIOD->AFR[0] = 0x00cc00cc;
|
||||
GPIOD->AFR[1] = 0xcccccccc;
|
||||
/* Configure PDx pins in Alternate function mode */
|
||||
GPIOD->MODER = 0xaaaa0a0a;
|
||||
/* Configure PDx pins speed to 100 MHz */
|
||||
GPIOD->OSPEEDR = 0xffff0f0f;
|
||||
/* Configure PDx pins Output type to push-pull */
|
||||
GPIOD->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PDx pins */
|
||||
GPIOD->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PEx pins to FSMC Alternate function */
|
||||
GPIOE->AFR[0] = 0xcccccccc;
|
||||
GPIOE->AFR[1] = 0xcccccccc;
|
||||
/* Configure PEx pins in Alternate function mode */
|
||||
GPIOE->MODER = 0xaaaaaaaa;
|
||||
/* Configure PEx pins speed to 100 MHz */
|
||||
GPIOE->OSPEEDR = 0xffffffff;
|
||||
/* Configure PEx pins Output type to push-pull */
|
||||
GPIOE->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PEx pins */
|
||||
GPIOE->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PFx pins to FSMC Alternate function */
|
||||
GPIOF->AFR[0] = 0x00cccccc;
|
||||
GPIOF->AFR[1] = 0xcccc0000;
|
||||
/* Configure PFx pins in Alternate function mode */
|
||||
GPIOF->MODER = 0xaa000aaa;
|
||||
/* Configure PFx pins speed to 100 MHz */
|
||||
GPIOF->OSPEEDR = 0xff000fff;
|
||||
/* Configure PFx pins Output type to push-pull */
|
||||
GPIOF->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PFx pins */
|
||||
GPIOF->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PGx pins to FSMC Alternate function */
|
||||
GPIOG->AFR[0] = 0x00cccccc;
|
||||
GPIOG->AFR[1] = 0x000000c0;
|
||||
/* Configure PGx pins in Alternate function mode */
|
||||
GPIOG->MODER = 0x00080aaa;
|
||||
/* Configure PGx pins speed to 100 MHz */
|
||||
GPIOG->OSPEEDR = 0x000c0fff;
|
||||
/* Configure PGx pins Output type to push-pull */
|
||||
GPIOG->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PGx pins */
|
||||
GPIOG->PUPDR = 0x00000000;
|
||||
|
||||
/*-- FSMC Configuration ------------------------------------------------------*/
|
||||
/* Enable the FSMC interface clock */
|
||||
RCC->AHB3ENR |= 0x00000001;
|
||||
|
||||
/* Configure and enable Bank1_SRAM2 */
|
||||
FSMC_Bank1->BTCR[2] = 0x00001011;
|
||||
FSMC_Bank1->BTCR[3] = 0x00000201;
|
||||
FSMC_Bank1E->BWTR[2] = 0x0fffffff;
|
||||
/*
|
||||
Bank1_SRAM2 is configured as follow:
|
||||
|
||||
p.FSMC_AddressSetupTime = 1;
|
||||
p.FSMC_AddressHoldTime = 0;
|
||||
p.FSMC_DataSetupTime = 2;
|
||||
p.FSMC_BusTurnAroundDuration = 0;
|
||||
p.FSMC_CLKDivision = 0;
|
||||
p.FSMC_DataLatency = 0;
|
||||
p.FSMC_AccessMode = FSMC_AccessMode_A;
|
||||
|
||||
FSMC_NORSRAMInitStructure.FSMC_Bank = FSMC_Bank1_NORSRAM2;
|
||||
FSMC_NORSRAMInitStructure.FSMC_DataAddressMux = FSMC_DataAddressMux_Disable;
|
||||
FSMC_NORSRAMInitStructure.FSMC_MemoryType = FSMC_MemoryType_SRAM;
|
||||
FSMC_NORSRAMInitStructure.FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_16b;
|
||||
FSMC_NORSRAMInitStructure.FSMC_BurstAccessMode = FSMC_BurstAccessMode_Disable;
|
||||
FSMC_NORSRAMInitStructure.FSMC_AsynchronousWait = FSMC_AsynchronousWait_Disable;
|
||||
FSMC_NORSRAMInitStructure.FSMC_WaitSignalPolarity = FSMC_WaitSignalPolarity_Low;
|
||||
FSMC_NORSRAMInitStructure.FSMC_WrapMode = FSMC_WrapMode_Disable;
|
||||
FSMC_NORSRAMInitStructure.FSMC_WaitSignalActive = FSMC_WaitSignalActive_BeforeWaitState;
|
||||
FSMC_NORSRAMInitStructure.FSMC_WriteOperation = FSMC_WriteOperation_Enable;
|
||||
FSMC_NORSRAMInitStructure.FSMC_WaitSignal = FSMC_WaitSignal_Disable;
|
||||
FSMC_NORSRAMInitStructure.FSMC_ExtendedMode = FSMC_ExtendedMode_Disable;
|
||||
FSMC_NORSRAMInitStructure.FSMC_WriteBurst = FSMC_WriteBurst_Disable;
|
||||
FSMC_NORSRAMInitStructure.FSMC_ReadWriteTimingStruct = &p;
|
||||
FSMC_NORSRAMInitStructure.FSMC_WriteTimingStruct = &p;
|
||||
*/
|
||||
}
|
||||
#endif /* DATA_IN_ExtSRAM */
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
||||
@@ -1,128 +0,0 @@
|
||||
/*
|
||||
* Copyright (C) OpenTX
|
||||
*
|
||||
* Based on code named
|
||||
* th9x - http://code.google.com/p/th9x
|
||||
* er9x - http://code.google.com/p/er9x
|
||||
* gruvin9x - http://code.google.com/p/gruvin9x
|
||||
*
|
||||
* License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
|
||||
#include "usb_bsp.h"
|
||||
|
||||
#include "board_taranis.h"
|
||||
#include "usbd_conf.h"
|
||||
|
||||
extern uint32_t SystemCoreClock;
|
||||
|
||||
/**
|
||||
* @brief USB_OTG_BSP_Init
|
||||
* Initilizes BSP configurations
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
|
||||
void USB_OTG_BSP_Init(USB_OTG_CORE_HANDLE *pdev)
|
||||
{
|
||||
GPIO_InitTypeDef GPIO_InitStructure;
|
||||
|
||||
RCC_AHB1PeriphClockCmd(USB_RCC_AHB1Periph_GPIO, ENABLE);
|
||||
|
||||
/* Configure DM and DP Pins */
|
||||
GPIO_InitStructure.GPIO_Pin = USB_GPIO_PIN_DM | USB_GPIO_PIN_DP;
|
||||
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_25MHz;
|
||||
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
|
||||
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
|
||||
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
|
||||
GPIO_Init(USB_GPIO, &GPIO_InitStructure);
|
||||
|
||||
GPIO_PinAFConfig(USB_GPIO, USB_GPIO_PinSource_DM, USB_GPIO_AF);
|
||||
GPIO_PinAFConfig(USB_GPIO, USB_GPIO_PinSource_DP, USB_GPIO_AF);
|
||||
|
||||
/* Configure VBUS Pin */
|
||||
GPIO_InitStructure.GPIO_Pin = USB_GPIO_PIN_VBUS;
|
||||
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
|
||||
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN;
|
||||
GPIO_InitStructure.GPIO_OType = GPIO_OType_OD;
|
||||
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL ;
|
||||
GPIO_Init(USB_GPIO, &GPIO_InitStructure);
|
||||
|
||||
RCC_APB2PeriphClockCmd(RCC_APB2Periph_SYSCFG, ENABLE);
|
||||
RCC_AHB2PeriphClockCmd(RCC_AHB2Periph_OTG_FS, ENABLE) ;
|
||||
}
|
||||
|
||||
void USB_OTG_BSP_Deinit(USB_OTG_CORE_HANDLE *pdev)
|
||||
{
|
||||
//nothing to do
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief USB_OTG_BSP_EnableInterrupt
|
||||
* Enable USB Global interrupt
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void USB_OTG_BSP_EnableInterrupt(USB_OTG_CORE_HANDLE *pdev)
|
||||
{
|
||||
NVIC_SetPriority(OTG_FS_IRQn, 11); // Lower priority interrupt
|
||||
NVIC_EnableIRQ(OTG_FS_IRQn);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief USB_OTG_BSP_DisableInterrupt
|
||||
* Disable USB Global interrupt
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void USB_OTG_BSP_DisableInterrupt(USB_OTG_CORE_HANDLE *pdev)
|
||||
{
|
||||
NVIC_DisableIRQ(OTG_FS_IRQn);
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @brief USB_OTG_BSP_uDelay
|
||||
* This function provides delay time in micro sec
|
||||
* @param usec : Value of delay required in micro sec
|
||||
* @retval None
|
||||
*/
|
||||
void USB_OTG_BSP_uDelay (const uint32_t usec)
|
||||
{
|
||||
uint32_t count = 0;
|
||||
const uint32_t utime = ((SystemCoreClock/1000000) * usec);
|
||||
do
|
||||
{
|
||||
if ( ++count > utime )
|
||||
{
|
||||
return ;
|
||||
}
|
||||
}
|
||||
while (1);
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @brief USB_OTG_BSP_mDelay
|
||||
* This function provides delay time in milli sec
|
||||
* @param msec : Value of delay required in milli sec
|
||||
* @retval None
|
||||
*/
|
||||
void USB_OTG_BSP_mDelay (const uint32_t msec)
|
||||
{
|
||||
USB_OTG_BSP_uDelay(msec * 1000);
|
||||
}
|
||||
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -1,71 +0,0 @@
|
||||
/*
|
||||
* Copyright (C) OpenTX
|
||||
*
|
||||
* Based on code named
|
||||
* th9x - http://code.google.com/p/th9x
|
||||
* er9x - http://code.google.com/p/er9x
|
||||
* gruvin9x - http://code.google.com/p/gruvin9x
|
||||
*
|
||||
* License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#include "board_taranis.h"
|
||||
#include "STM32_USB-Host-Device_Lib_V2.1.0/Libraries/STM32_USB_OTG_Driver/inc/usb_dcd_int.h"
|
||||
#include "debug.h"
|
||||
|
||||
int usbPlugged(void)
|
||||
{
|
||||
// debounce
|
||||
static uint8_t debounced_state = 0;
|
||||
static uint8_t last_state = 0;
|
||||
|
||||
if (GPIO_ReadInputDataBit(USB_GPIO, USB_GPIO_PIN_VBUS)) {
|
||||
if (last_state) {
|
||||
debounced_state = 1;
|
||||
}
|
||||
last_state = 1;
|
||||
}
|
||||
else {
|
||||
if (!last_state) {
|
||||
debounced_state = 0;
|
||||
}
|
||||
last_state = 0;
|
||||
}
|
||||
return debounced_state;
|
||||
}
|
||||
|
||||
USB_OTG_CORE_HANDLE USB_OTG_dev;
|
||||
|
||||
void OTG_FS_IRQHandler(void)
|
||||
{
|
||||
DEBUG_INTERRUPT(INT_OTG_FS);
|
||||
USBD_OTG_ISR_Handler(&USB_OTG_dev);
|
||||
}
|
||||
|
||||
void usbInit(void)
|
||||
{
|
||||
#if defined(USB_JOYSTICK)
|
||||
// initialize USB as HID device
|
||||
USBD_Init(&USB_OTG_dev, USB_OTG_FS_CORE_ID, &USR_desc, &USBD_HID_cb, &USR_cb);
|
||||
#elif defined(USB_SERIAL)
|
||||
// initialize USB as CDC device (virtual serial port)
|
||||
USBD_Init(&USB_OTG_dev, USB_OTG_FS_CORE_ID, &USR_desc, &USBD_CDC_cb, &USR_cb);
|
||||
#elif defined(USB_MASS_STORAGE)
|
||||
// initialize USB as MSC device
|
||||
USBD_Init(&USB_OTG_dev, USB_OTG_FS_CORE_ID, &USR_desc, &USBD_MSC_cb, &USR_cb);
|
||||
#endif
|
||||
}
|
||||
|
||||
void usbDeInit(void)
|
||||
{
|
||||
USBD_DeInit(&USB_OTG_dev);
|
||||
}
|
||||
@@ -1,215 +0,0 @@
|
||||
/*
|
||||
* Copyright (C) OpenTX
|
||||
*
|
||||
* Based on code named
|
||||
* th9x - http://code.google.com/p/th9x
|
||||
* er9x - http://code.google.com/p/er9x
|
||||
* gruvin9x - http://code.google.com/p/gruvin9x
|
||||
*
|
||||
* License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#ifdef USB_OTG_HS_INTERNAL_DMA_ENABLED
|
||||
#pragma data_alignment = 4
|
||||
#endif /* USB_OTG_HS_INTERNAL_DMA_ENABLED */
|
||||
|
||||
#include "opentx.h"
|
||||
|
||||
extern "C" {
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "usb_conf.h"
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
|
||||
|
||||
/* These are external variables imported from CDC core to be used for IN
|
||||
transfer management. */
|
||||
extern uint8_t APP_Rx_Buffer []; /* Write CDC received data in this buffer.
|
||||
These data will be sent over USB IN endpoint
|
||||
in the CDC core functions. */
|
||||
extern volatile uint32_t APP_Rx_ptr_in; /* Increment this pointer or roll it back to
|
||||
start address when writing received data
|
||||
in the buffer APP_Rx_Buffer. */
|
||||
extern volatile uint32_t APP_Rx_ptr_out;
|
||||
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
static uint16_t VCP_Init (void);
|
||||
static uint16_t VCP_DeInit (void);
|
||||
static uint16_t VCP_Ctrl (uint32_t Cmd, uint8_t* Buf, uint32_t Len);
|
||||
static uint16_t VCP_DataRx (uint8_t* Buf, uint32_t Len);
|
||||
|
||||
// static uint16_t VCP_COMConfig(uint8_t Conf);
|
||||
|
||||
CDC_IF_Prop_TypeDef VCP_fops =
|
||||
{
|
||||
VCP_Init,
|
||||
VCP_DeInit,
|
||||
VCP_Ctrl,
|
||||
0,
|
||||
VCP_DataRx
|
||||
};
|
||||
|
||||
} // extern "C"
|
||||
|
||||
bool cdcConnected = false;
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/**
|
||||
* @brief VCP_Init
|
||||
* Initializes the Media on the STM32
|
||||
* @param None
|
||||
* @retval Result of the opeartion (USBD_OK in all cases)
|
||||
*/
|
||||
static uint16_t VCP_Init(void)
|
||||
{
|
||||
cdcConnected = true;
|
||||
return USBD_OK;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief VCP_DeInit
|
||||
* DeInitializes the Media on the STM32
|
||||
* @param None
|
||||
* @retval Result of the opeartion (USBD_OK in all cases)
|
||||
*/
|
||||
static uint16_t VCP_DeInit(void)
|
||||
{
|
||||
cdcConnected = false;
|
||||
return USBD_OK;
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @brief VCP_Ctrl
|
||||
* Manage the CDC class requests
|
||||
* @param Cmd: Command code
|
||||
* @param Buf: Buffer containing command data (request parameters)
|
||||
* @param Len: Number of data to be sent (in bytes)
|
||||
* @retval Result of the opeartion (USBD_OK in all cases)
|
||||
*/
|
||||
static uint16_t VCP_Ctrl (uint32_t Cmd, uint8_t* Buf, uint32_t Len)
|
||||
{
|
||||
switch (Cmd)
|
||||
{
|
||||
case SEND_ENCAPSULATED_COMMAND:
|
||||
/* Not needed for this driver */
|
||||
break;
|
||||
|
||||
case GET_ENCAPSULATED_RESPONSE:
|
||||
/* Not needed for this driver */
|
||||
break;
|
||||
|
||||
case SET_COMM_FEATURE:
|
||||
/* Not needed for this driver */
|
||||
break;
|
||||
|
||||
case GET_COMM_FEATURE:
|
||||
/* Not needed for this driver */
|
||||
break;
|
||||
|
||||
case CLEAR_COMM_FEATURE:
|
||||
/* Not needed for this driver */
|
||||
break;
|
||||
|
||||
case SET_LINE_CODING:
|
||||
/* Not needed for this driver */
|
||||
break;
|
||||
|
||||
case GET_LINE_CODING:
|
||||
/* Not needed for this driver */
|
||||
break;
|
||||
|
||||
case SET_CONTROL_LINE_STATE:
|
||||
/* Not needed for this driver */
|
||||
break;
|
||||
|
||||
case SEND_BREAK:
|
||||
/* Not needed for this driver */
|
||||
break;
|
||||
|
||||
default:
|
||||
break;
|
||||
}
|
||||
|
||||
return USBD_OK;
|
||||
}
|
||||
|
||||
// some debug vars
|
||||
uint16_t usbWraps = 0;
|
||||
uint16_t charsWritten = 0;
|
||||
|
||||
void usbSerialPutc(uint8_t c)
|
||||
{
|
||||
if (!cdcConnected) return;
|
||||
|
||||
uint32_t txDataLen;
|
||||
do {
|
||||
txDataLen = APP_RX_DATA_SIZE + APP_Rx_ptr_in - APP_Rx_ptr_out;
|
||||
if (txDataLen >= APP_RX_DATA_SIZE) {
|
||||
txDataLen -= APP_RX_DATA_SIZE;
|
||||
}
|
||||
} while (txDataLen >= (APP_RX_DATA_SIZE - CDC_DATA_MAX_PACKET_SIZE));
|
||||
|
||||
APP_Rx_Buffer[APP_Rx_ptr_in] = c;
|
||||
++charsWritten;
|
||||
/* To avoid buffer overflow */
|
||||
if (APP_Rx_ptr_in >= APP_RX_DATA_SIZE-1) {
|
||||
APP_Rx_ptr_in = 0;
|
||||
++usbWraps;
|
||||
}
|
||||
else {
|
||||
APP_Rx_ptr_in++;
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief VCP_DataRx
|
||||
* Data received over USB OUT endpoint is available here
|
||||
*
|
||||
* @note
|
||||
* This function will block any OUT packet reception on USB endpoint
|
||||
* until exiting this function. If you exit this function before transfer
|
||||
* is complete on CDC interface (ie. using DMA controller) it will result
|
||||
* in receiving more data while previous ones are still not sent.
|
||||
*
|
||||
* @note
|
||||
* This function is executed inside the USBD_OTG_ISR_Handler() interrupt handler!
|
||||
|
||||
* @param Buf: Buffer of data to be received
|
||||
* @param Len: Number of data received (in bytes)
|
||||
* @retval Result of the opeartion: USBD_OK if all operations are OK else VCP_FAIL
|
||||
*/
|
||||
static uint16_t VCP_DataRx (uint8_t* Buf, uint32_t Len)
|
||||
{
|
||||
// TODO: try implementing inbound flow control:
|
||||
// if the cliRxFifo does not have enough free space to receive all
|
||||
// available characters, return VCP_FAIL. Maybe that will throttle down
|
||||
// the sender and we will receive the same packet at a later time.
|
||||
|
||||
#if defined(CLI)
|
||||
//copy data to the application FIFO
|
||||
for (uint32_t i = 0; i < Len; i++)
|
||||
{
|
||||
cliRxFifo.push(Buf[i]);
|
||||
}
|
||||
#endif
|
||||
|
||||
return USBD_OK;
|
||||
}
|
||||
|
||||
|
||||
|
||||
// /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -1,114 +0,0 @@
|
||||
/*
|
||||
* Copyright (C) OpenTX
|
||||
*
|
||||
* Based on code named
|
||||
* th9x - http://code.google.com/p/th9x
|
||||
* er9x - http://code.google.com/p/er9x
|
||||
* gruvin9x - http://code.google.com/p/gruvin9x
|
||||
*
|
||||
* License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
|
||||
#ifndef _USBD_DESC_H_
|
||||
#define _USBD_DESC_H_
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "usb_core.h"
|
||||
#include "usbd_def.h"
|
||||
|
||||
/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup USB_DESC
|
||||
* @brief general defines for the usb device library file
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup USB_DESC_Exported_Defines
|
||||
* @{
|
||||
*/
|
||||
#define USB_DEVICE_DESCRIPTOR_TYPE 0x01
|
||||
#define USB_CONFIGURATION_DESCRIPTOR_TYPE 0x02
|
||||
#define USB_STRING_DESCRIPTOR_TYPE 0x03
|
||||
#define USB_INTERFACE_DESCRIPTOR_TYPE 0x04
|
||||
#define USB_ENDPOINT_DESCRIPTOR_TYPE 0x05
|
||||
#define USB_SIZ_DEVICE_DESC 18
|
||||
#define USB_SIZ_STRING_LANGID 4
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @defgroup USBD_DESC_Exported_TypesDefinitions
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
|
||||
/** @defgroup USBD_DESC_Exported_Macros
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_DESC_Exported_Variables
|
||||
* @{
|
||||
*/
|
||||
extern const uint8_t USBD_DeviceDesc [USB_SIZ_DEVICE_DESC];
|
||||
extern uint8_t USBD_StrDesc[USB_MAX_STR_DESC_SIZ];
|
||||
extern const uint8_t USBD_OtherSpeedCfgDesc[USB_LEN_CFG_DESC];
|
||||
extern const uint8_t USBD_DeviceQualifierDesc[USB_LEN_DEV_QUALIFIER_DESC];
|
||||
extern const uint8_t USBD_LangIDDesc[USB_SIZ_STRING_LANGID];
|
||||
extern const USBD_DEVICE USR_desc;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_DESC_Exported_FunctionsPrototype
|
||||
* @{
|
||||
*/
|
||||
|
||||
|
||||
uint8_t * USBD_USR_DeviceDescriptor( uint8_t speed , uint16_t *length);
|
||||
uint8_t * USBD_USR_LangIDStrDescriptor( uint8_t speed , uint16_t *length);
|
||||
uint8_t * USBD_USR_ManufacturerStrDescriptor ( uint8_t speed , uint16_t *length);
|
||||
uint8_t * USBD_USR_ProductStrDescriptor ( uint8_t speed , uint16_t *length);
|
||||
uint8_t * USBD_USR_SerialStrDescriptor( uint8_t speed , uint16_t *length);
|
||||
uint8_t * USBD_USR_ConfigStrDescriptor( uint8_t speed , uint16_t *length);
|
||||
uint8_t * USBD_USR_InterfaceStrDescriptor( uint8_t speed , uint16_t *length);
|
||||
|
||||
#ifdef USB_SUPPORT_USER_STRING_DESC
|
||||
uint8_t * USBD_USR_USRStringDesc (uint8_t speed, uint8_t idx , uint16_t *length);
|
||||
#endif /* USB_SUPPORT_USER_STRING_DESC */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif // _USBD_DESC_H_
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -21,7 +21,7 @@
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "../../opentx.h"
|
||||
#include "../../thirdparty/FatFs/diskio.h"
|
||||
#include "board_taranis.h"
|
||||
#include "board.h"
|
||||
|
||||
#if defined(__cplusplus) && !defined(SIMU)
|
||||
extern "C" {
|
||||
|
||||
@@ -1,121 +0,0 @@
|
||||
/*
|
||||
* Copyright (C) OpenTX
|
||||
*
|
||||
* Based on code named
|
||||
* th9x - http://code.google.com/p/th9x
|
||||
* er9x - http://code.google.com/p/er9x
|
||||
* gruvin9x - http://code.google.com/p/gruvin9x
|
||||
*
|
||||
* License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "../../opentx.h"
|
||||
|
||||
extern "C" {
|
||||
#include "usbd_usr.h"
|
||||
|
||||
/* Points to the DEVICE_PROP structure of current device */
|
||||
/* The purpose of this register is to speed up the execution */
|
||||
|
||||
|
||||
const USBD_Usr_cb_TypeDef USR_cb =
|
||||
{
|
||||
USBD_USR_Init,
|
||||
USBD_USR_DeviceReset,
|
||||
USBD_USR_DeviceConfigured,
|
||||
USBD_USR_DeviceSuspended,
|
||||
USBD_USR_DeviceResumed,
|
||||
|
||||
USBD_USR_DeviceConnected,
|
||||
USBD_USR_DeviceDisconnected,
|
||||
};
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Whatever the user application needs to do when USB is initialised
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void USBD_USR_Init(void)
|
||||
{
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Displays the message on LCD on device reset event
|
||||
* @param speed : device speed
|
||||
* @retval None
|
||||
*/
|
||||
void USBD_USR_DeviceReset (uint8_t speed)
|
||||
{
|
||||
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @brief Displays the message on LCD on device config event
|
||||
* @param None
|
||||
* @retval Staus
|
||||
*/
|
||||
void USBD_USR_DeviceConfigured (void)
|
||||
{
|
||||
|
||||
}
|
||||
/**
|
||||
* @brief Displays the message on LCD on device suspend event
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void USBD_USR_DeviceSuspended(void)
|
||||
{
|
||||
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @brief Displays the message on LCD on device resume event
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void USBD_USR_DeviceResumed(void)
|
||||
{
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief USBD_USR_DeviceConnected
|
||||
* Displays the message on LCD on device connection Event
|
||||
* @param None
|
||||
* @retval Staus
|
||||
*/
|
||||
void USBD_USR_DeviceConnected (void)
|
||||
{
|
||||
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @brief USBD_USR_DeviceDisonnected
|
||||
* Displays the message on LCD on device disconnection Event
|
||||
* @param None
|
||||
* @retval Staus
|
||||
*/
|
||||
void USBD_USR_DeviceDisconnected (void)
|
||||
{
|
||||
#if !defined(BOOT) && defined(USB_MASS_STORAGE)
|
||||
NVIC_SystemReset();
|
||||
#endif
|
||||
}
|
||||
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
Reference in New Issue
Block a user