* USB Joystick implemented

* USB Mass storage mode removed from openTX (this is now supported by Bootloader)
This commit is contained in:
Damjan Adamic
2014-03-21 20:58:41 +01:00
parent bc9650fc0c
commit 86f136c733
13 changed files with 667 additions and 59 deletions
@@ -159,14 +159,16 @@ void USBD_Init(USB_OTG_CORE_HANDLE *pdev,
/**
* @brief USBD_DeInit
* Re-Initialize th device library
* Deinitialize USB device library
* @param pdev: device instance
* @retval status: status
*/
USBD_Status USBD_DeInit(USB_OTG_CORE_HANDLE *pdev)
{
/* Software Init */
/*Disable Interrupts*/
USB_OTG_BSP_DisableInterrupt(pdev);
USB_OTG_DisableGlobalInt(pdev);
USB_OTG_BSP_Deinit(pdev);
return USBD_OK;
}
@@ -78,9 +78,11 @@
void BSP_Init(void);
void USB_OTG_BSP_Init (USB_OTG_CORE_HANDLE *pdev);
void USB_OTG_BSP_Deinit(USB_OTG_CORE_HANDLE *pdev);
void USB_OTG_BSP_uDelay (const uint32_t usec);
void USB_OTG_BSP_mDelay (const uint32_t msec);
void USB_OTG_BSP_EnableInterrupt (USB_OTG_CORE_HANDLE *pdev);
void USB_OTG_BSP_DisableInterrupt (USB_OTG_CORE_HANDLE *pdev);
#ifdef USE_HOST_MODE
void USB_OTG_BSP_ConfigVBUS(USB_OTG_CORE_HANDLE *pdev);
void USB_OTG_BSP_DriveVBUS(USB_OTG_CORE_HANDLE *pdev,uint8_t state);
@@ -470,6 +470,36 @@ static uint32_t DCD_HandleInEP_ISR(USB_OTG_CORE_HANDLE *pdev)
}
if (diepint.b.emptyintr)
{
/*===============ADDED SECTION ==============================*/
/*
This only applies to INTERRUPT transfer mode.
diepint.b.emptyintr interrupt can't be reset by writing 1 to
DIEPINT register. According to reference manual, this bit
is read-only.
The CLEAR_IN_EP_INTR(epnum, emptyintr) does not work!
The only way to stop this interrupt is to disable it using
mask register DIEPEMPMSK.
Original code gets here, is unsuccessful at interrupt flag reset
and when interrupt handler returns, another one is fired again,
robbing CPU time, which is then spent only in interrupt handlers
(this one and all other that have higher priority)
This only happens in HID mode (when interrupt in endpoint is
used) and when host is not actively polling device (us) for
update. This is situation on Linux when no program is using
joystick. The kernel/joystick driver stops polling device.
*/
if ( pdev->dev.in_ep[epnum].type == USB_OTG_EP_INT ) {
fifoemptymsk = 0x1 << epnum;
USB_OTG_MODIFY_REG32(&pdev->regs.DREGS->DIEPEMPMSK, fifoemptymsk, 0);
}
/*===============END OF ADDED SECTION ==============================*/
DCD_WriteEmptyTxFifo(pdev , epnum);