refactor: SD card SPI HAL (#3957)
* refactor: SD card SPI driver * Removed SPI and DMA StdPeriph drivers * Allow for disabling SPI DMA support * Disable SPI sdcard CRC support * Fix 2MHz timer on NV14 * Shared VS1053b driver * Fix: SPI2 uses PCLK1 * feat: new generic diskio API * More generic SD_CARD_PRESENT() * Fixes * Flush incoming block on token mismatch * Scratch buffer test * Incredible hack to re-sync sd card * fix: SDIO driver
This commit is contained in:
@@ -20,6 +20,18 @@
|
||||
*/
|
||||
|
||||
#include "stm32_spi.h"
|
||||
#include "stm32_dma.h"
|
||||
#include "stm32_gpio_driver.h"
|
||||
#include "definitions.h"
|
||||
|
||||
#include <stdlib.h>
|
||||
#include <string.h>
|
||||
|
||||
#if !defined(SPI_DISABLE_DMA)
|
||||
#define USE_SPI_DMA
|
||||
#endif
|
||||
|
||||
#define SPI_DUMMY_BYTE (0xFF)
|
||||
|
||||
void stm32_spi_enable_clock(SPI_TypeDef *SPIx)
|
||||
{
|
||||
@@ -53,3 +65,279 @@ void stm32_spi_enable_clock(SPI_TypeDef *SPIx)
|
||||
#endif
|
||||
}
|
||||
|
||||
static inline uint32_t _get_spi_af(SPI_TypeDef *SPIx)
|
||||
{
|
||||
#if defined(SPI3)
|
||||
if (SPIx == SPI3) return LL_GPIO_AF_6;
|
||||
#endif
|
||||
return LL_GPIO_AF_5;
|
||||
}
|
||||
|
||||
static uint32_t _get_spi_prescaler(SPI_TypeDef *SPIx, uint32_t max_freq)
|
||||
{
|
||||
LL_RCC_ClocksTypeDef RCC_Clocks;
|
||||
LL_RCC_GetSystemClocksFreq(&RCC_Clocks);
|
||||
|
||||
uint32_t pclk = RCC_Clocks.PCLK2_Frequency;
|
||||
#if defined(SPI2)
|
||||
if (SPIx == SPI2) {
|
||||
pclk = RCC_Clocks.PCLK1_Frequency;
|
||||
}
|
||||
#endif
|
||||
#if defined(SPI3)
|
||||
if (SPIx == SPI3) {
|
||||
pclk = RCC_Clocks.PCLK1_Frequency;
|
||||
}
|
||||
#endif
|
||||
|
||||
uint32_t divider = (pclk + max_freq) / max_freq;
|
||||
uint32_t presc;
|
||||
if (divider > 128) {
|
||||
presc = LL_SPI_BAUDRATEPRESCALER_DIV256;
|
||||
} else if (divider > 64) {
|
||||
presc = LL_SPI_BAUDRATEPRESCALER_DIV128;
|
||||
} else if (divider > 32) {
|
||||
presc = LL_SPI_BAUDRATEPRESCALER_DIV64;
|
||||
} else if (divider > 16) {
|
||||
presc = LL_SPI_BAUDRATEPRESCALER_DIV32;
|
||||
} else if (divider > 8) {
|
||||
presc = LL_SPI_BAUDRATEPRESCALER_DIV16;
|
||||
} else if (divider > 4) {
|
||||
presc = LL_SPI_BAUDRATEPRESCALER_DIV8;
|
||||
} else if (divider > 2) {
|
||||
presc = LL_SPI_BAUDRATEPRESCALER_DIV4;
|
||||
} else {
|
||||
presc = LL_SPI_BAUDRATEPRESCALER_DIV2;
|
||||
}
|
||||
|
||||
return presc;
|
||||
}
|
||||
|
||||
static void _init_gpios(const stm32_spi_t* spi)
|
||||
{
|
||||
stm32_gpio_enable_clock(spi->SPI_GPIOx);
|
||||
stm32_gpio_enable_clock(spi->CS_GPIOx);
|
||||
|
||||
LL_GPIO_InitTypeDef pinInit;
|
||||
LL_GPIO_StructInit(&pinInit);
|
||||
|
||||
// SCK, MISO, MOSI
|
||||
pinInit.Pin = spi->SPI_Pins;
|
||||
pinInit.Mode = LL_GPIO_MODE_ALTERNATE;
|
||||
pinInit.Alternate = _get_spi_af(spi->SPIx);
|
||||
pinInit.Speed = LL_GPIO_SPEED_FREQ_VERY_HIGH;
|
||||
pinInit.Pull = LL_GPIO_PULL_UP;
|
||||
LL_GPIO_Init(spi->SPI_GPIOx, &pinInit);
|
||||
|
||||
// CS
|
||||
pinInit.Pin = spi->CS_Pin;
|
||||
pinInit.Mode = LL_GPIO_MODE_OUTPUT;
|
||||
pinInit.Alternate = LL_GPIO_AF_0;
|
||||
pinInit.Pull = LL_GPIO_PULL_NO;
|
||||
LL_GPIO_Init(spi->CS_GPIOx, &pinInit);
|
||||
}
|
||||
|
||||
#if defined(USE_SPI_DMA)
|
||||
static void _config_dma_streams(const stm32_spi_t* spi)
|
||||
{
|
||||
stm32_dma_enable_clock(spi->DMA);
|
||||
LL_DMA_DeInit(spi->DMA, spi->rxDMA_Stream);
|
||||
LL_DMA_DeInit(spi->DMA, spi->txDMA_Stream);
|
||||
|
||||
LL_DMA_InitTypeDef dmaInit;
|
||||
LL_DMA_StructInit(&dmaInit);
|
||||
|
||||
dmaInit.Channel = spi->DMA_Channel;
|
||||
dmaInit.PeriphOrM2MSrcAddress = (uint32_t)&spi->SPIx->DR;
|
||||
dmaInit.MemoryOrM2MDstIncMode = LL_DMA_MEMORY_INCREMENT;
|
||||
dmaInit.Priority = LL_DMA_PRIORITY_VERYHIGH;
|
||||
dmaInit.FIFOMode = LL_DMA_FIFOMODE_ENABLE;
|
||||
dmaInit.FIFOThreshold = LL_DMA_FIFOTHRESHOLD_FULL;
|
||||
|
||||
dmaInit.Direction = LL_DMA_DIRECTION_PERIPH_TO_MEMORY;
|
||||
LL_DMA_Init(spi->DMA, spi->rxDMA_Stream, &dmaInit);
|
||||
|
||||
dmaInit.Direction = LL_DMA_DIRECTION_MEMORY_TO_PERIPH;
|
||||
LL_DMA_Init(spi->DMA, spi->txDMA_Stream, &dmaInit);
|
||||
}
|
||||
#endif
|
||||
|
||||
void stm32_spi_init(const stm32_spi_t* spi)
|
||||
{
|
||||
_init_gpios(spi);
|
||||
|
||||
auto SPIx = spi->SPIx;
|
||||
stm32_spi_enable_clock(SPIx);
|
||||
LL_SPI_DeInit(SPIx);
|
||||
|
||||
LL_SPI_InitTypeDef spiInit;
|
||||
LL_SPI_StructInit(&spiInit);
|
||||
|
||||
spiInit.TransferDirection = LL_SPI_FULL_DUPLEX;
|
||||
spiInit.Mode = LL_SPI_MODE_MASTER;
|
||||
spiInit.NSS = LL_SPI_NSS_SOFT;
|
||||
|
||||
LL_SPI_Init(SPIx, &spiInit);
|
||||
LL_SPI_Enable(SPIx);
|
||||
|
||||
#if defined(USE_SPI_DMA)
|
||||
if (spi->DMA) {
|
||||
_config_dma_streams(spi);
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
// void stm32_spi_deinit(const stm32_spi_t* spi);
|
||||
|
||||
void stm32_spi_select(const stm32_spi_t* spi)
|
||||
{
|
||||
LL_GPIO_ResetOutputPin(spi->CS_GPIOx, spi->CS_Pin);
|
||||
}
|
||||
|
||||
void stm32_spi_unselect(const stm32_spi_t* spi)
|
||||
{
|
||||
LL_GPIO_SetOutputPin(spi->CS_GPIOx, spi->CS_Pin);
|
||||
}
|
||||
|
||||
void stm32_spi_set_max_baudrate(const stm32_spi_t* spi, uint32_t baudrate)
|
||||
{
|
||||
auto* SPIx = spi->SPIx;
|
||||
uint32_t presc = _get_spi_prescaler(SPIx, baudrate);
|
||||
LL_SPI_SetBaudRatePrescaler(SPIx, presc);
|
||||
}
|
||||
|
||||
uint8_t stm32_spi_transfer_byte(const stm32_spi_t* spi, uint8_t out)
|
||||
{
|
||||
auto* SPIx = spi->SPIx;
|
||||
while (!LL_SPI_IsActiveFlag_TXE(SPIx));
|
||||
LL_SPI_TransmitData8(SPIx, out);
|
||||
|
||||
while (!LL_SPI_IsActiveFlag_RXNE(SPIx));
|
||||
return LL_SPI_ReceiveData8(SPIx);
|
||||
}
|
||||
|
||||
uint16_t stm32_spi_transfer_bytes(const stm32_spi_t* spi, const uint8_t* out,
|
||||
uint8_t* in, uint16_t length)
|
||||
{
|
||||
unsigned trans_bytes = 0;
|
||||
uint8_t in_temp;
|
||||
|
||||
for (trans_bytes = 0; trans_bytes < length; trans_bytes++) {
|
||||
if (out != nullptr) {
|
||||
in_temp = stm32_spi_transfer_byte(spi, out[trans_bytes]);
|
||||
} else {
|
||||
in_temp = stm32_spi_transfer_byte(spi, SPI_DUMMY_BYTE);
|
||||
}
|
||||
if (in != nullptr) {
|
||||
in[trans_bytes] = in_temp;
|
||||
}
|
||||
}
|
||||
|
||||
return trans_bytes;
|
||||
}
|
||||
|
||||
uint16_t stm32_spi_transfer_word(const stm32_spi_t* spi, uint16_t out)
|
||||
{
|
||||
auto* SPIx = spi->SPIx;
|
||||
while (!LL_SPI_IsActiveFlag_TXE(SPIx));
|
||||
LL_SPI_TransmitData16(SPIx, out);
|
||||
|
||||
while (!LL_SPI_IsActiveFlag_RXNE(SPIx));
|
||||
return LL_SPI_ReceiveData16(SPIx);
|
||||
}
|
||||
|
||||
#if defined(USE_SPI_DMA)
|
||||
static uint16_t _scratch_byte __DMA;
|
||||
static uint8_t _scratch_buffer[512] __DMA;
|
||||
|
||||
static void _dma_enable_stream(DMA_TypeDef* DMAx, uint32_t stream,
|
||||
const void* data, uint32_t length)
|
||||
{
|
||||
stm32_dma_check_tc_flag(DMAx, stream);
|
||||
LL_DMA_SetMemoryAddress(DMAx, stream, (uintptr_t)data);
|
||||
LL_DMA_SetDataLength(DMAx, stream, length);
|
||||
LL_DMA_EnableStream(DMAx, stream);
|
||||
}
|
||||
#endif
|
||||
|
||||
uint16_t stm32_spi_dma_receive_bytes(const stm32_spi_t* spi,
|
||||
uint8_t* data, uint16_t length)
|
||||
{
|
||||
#if defined(USE_SPI_DMA)
|
||||
if (!spi->DMA) {
|
||||
return stm32_spi_transfer_bytes(spi, 0, data, length);
|
||||
}
|
||||
|
||||
if (((uintptr_t)data < SRAM_BASE) || ((uintptr_t)data & 3)) {
|
||||
_dma_enable_stream(spi->DMA, spi->rxDMA_Stream, _scratch_buffer, length);
|
||||
} else {
|
||||
_dma_enable_stream(spi->DMA, spi->rxDMA_Stream, data, length);
|
||||
}
|
||||
LL_SPI_EnableDMAReq_RX(spi->SPIx);
|
||||
|
||||
_scratch_byte = 0xFFFF;
|
||||
LL_DMA_SetMemoryIncMode(spi->DMA, spi->txDMA_Stream, LL_DMA_MEMORY_NOINCREMENT);
|
||||
_dma_enable_stream(spi->DMA, spi->txDMA_Stream, &_scratch_byte, length);
|
||||
LL_SPI_EnableDMAReq_TX(spi->SPIx);
|
||||
|
||||
// Wait for end of DMA transfer
|
||||
while(!stm32_dma_check_tc_flag(spi->DMA, spi->rxDMA_Stream));
|
||||
|
||||
// Disable SPI TX/RX DMA requests
|
||||
CLEAR_BIT(spi->SPIx->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN);
|
||||
|
||||
// Wait for TXE=1
|
||||
while(!LL_SPI_IsActiveFlag_TXE(spi->SPIx));
|
||||
|
||||
// Wait for BSY=0
|
||||
while(LL_SPI_IsActiveFlag_BSY(spi->SPIx));
|
||||
|
||||
if (((uintptr_t)data < SRAM_BASE) || ((uintptr_t)data & 3)) {
|
||||
memcpy(data, _scratch_buffer, length);
|
||||
}
|
||||
|
||||
return length;
|
||||
#else
|
||||
return stm32_spi_transfer_bytes(spi, 0, data, length);
|
||||
#endif
|
||||
}
|
||||
|
||||
uint16_t stm32_spi_dma_transmit_bytes(const stm32_spi_t* spi,
|
||||
const uint8_t* data, uint16_t length)
|
||||
{
|
||||
#if defined(USE_SPI_DMA)
|
||||
if (!spi->DMA) {
|
||||
return stm32_spi_transfer_bytes(spi, data, 0, length);
|
||||
}
|
||||
|
||||
if (((uintptr_t)data < SRAM_BASE) || ((uintptr_t)data & 3)) {
|
||||
memcpy(_scratch_buffer, data, length);
|
||||
data = _scratch_buffer;
|
||||
}
|
||||
|
||||
LL_DMA_SetMemoryIncMode(spi->DMA, spi->txDMA_Stream, LL_DMA_MEMORY_INCREMENT);
|
||||
_dma_enable_stream(spi->DMA, spi->txDMA_Stream, data, length);
|
||||
LL_SPI_EnableDMAReq_TX(spi->SPIx);
|
||||
|
||||
// Wait for end of DMA transfer
|
||||
while (!stm32_dma_check_tc_flag(spi->DMA, spi->txDMA_Stream));
|
||||
|
||||
// Disable SPI TX DMA requests
|
||||
CLEAR_BIT(spi->SPIx->CR2, SPI_CR2_TXDMAEN);
|
||||
|
||||
// Wait for TXE=1
|
||||
while (!LL_SPI_IsActiveFlag_TXE(spi->SPIx));
|
||||
|
||||
// Wait for BSY=0
|
||||
while (LL_SPI_IsActiveFlag_BSY(spi->SPIx));
|
||||
|
||||
// Clear data register
|
||||
if (LL_SPI_IsActiveFlag_RXNE(spi->SPIx)) {
|
||||
(void)LL_SPI_ReceiveData8(spi->SPIx);
|
||||
}
|
||||
|
||||
return length;
|
||||
#else
|
||||
return stm32_spi_transfer_bytes(spi, data, 0, length);
|
||||
#endif
|
||||
}
|
||||
|
||||
Reference in New Issue
Block a user