* removed red LED

* added GT911 fw version and hiccup cound output to analogs page
* changed I2C to 400 kHz
* changed X Y threshold to 1
* added trace output
* fixed bool / uint8_t errors
This commit is contained in:
rotorman
2021-07-11 13:04:13 +02:00
committed by Raphael Coeffic
parent 2c65b21355
commit 8c7f3cecec
5 changed files with 132 additions and 24 deletions
+119 -21
View File
@@ -39,9 +39,9 @@ const uint8_t TOUCH_GT911_Cfg[] = {
0x50, // 0x8053 Screen touch level
0x3C, // 0x8054 Screen touch leave
0x03, // 0x8055 Low power control
0x05, // 0x8056 Refresh rate
0x00, // 0x8057 X threshold
0x00, // 0x8058 Y threshold
0x0F, // 0x8056 Refresh rate
0x01, // 0x8057 X threshold
0x01, // 0x8058 Y threshold
0x00, // 0x8059 Reserved
0x00, // 0x805A Reserved
0x00, // 0x805B Space (top, bottom)
@@ -231,8 +231,8 @@ const uint8_t TOUCH_GT911_Cfg[] =
0x3C, // 0x8054 Screen touch leave
0x03, // 0x8055 Low power control
0x0F, // 0x8056 Refresh rate
0x0A, // 0x8057 X threshold
0x0A, // 0x8058 Y threshold
0x01, // 0x8057 X threshold
0x01, // 0x8058 Y threshold
0x00, // 0x8059 Reserved
0x00, // 0x805A Reserved
0x11, // 0x805B Space (top, bottom)
@@ -404,8 +404,10 @@ const uint8_t TOUCH_GT911_Cfg[] =
#endif
bool touchGT911Flag = false;
volatile bool touchEventOccured = false;
volatile static bool touchEventOccured = false;
struct TouchData touchData;
uint16_t touchGT911fwver = 0;
uint16_t touchGT911hiccups = 0;
static void TOUCH_AF_ExtiStop(void)
{
@@ -484,6 +486,8 @@ void TOUCH_AF_INT_Change(void)
void I2C_Init()
{
TRACE("I2C Init");
I2C_DeInit(I2C);
GPIO_InitTypeDef GPIO_InitStructure;
@@ -529,33 +533,55 @@ bool I2C_WaitEventCleared(uint32_t event)
uint8_t I2C_GT911_WriteRegister(uint16_t reg, uint8_t * buf, uint8_t len)
{
if (!I2C_WaitEventCleared(I2C_FLAG_BUSY))
{
TRACE("I2C WRITE ERROR: busy timeout");
return false;
}
I2C_GenerateSTART(I2C, ENABLE);
if (!I2C_WaitEvent(I2C_EVENT_MASTER_MODE_SELECT))
{
TRACE("I2C WRITE ERROR: could not issue start");
return false;
}
I2C_Send7bitAddress(I2C, GT_CMD_WR, I2C_Direction_Transmitter);
if (!I2C_WaitEvent(I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED))
{
TRACE("I2C WRITE ERROR: could not send device address");
return false;
}
I2C_SendData(I2C, (uint8_t)((reg & 0xFF00) >> 8));
if (!I2C_WaitEvent(I2C_EVENT_MASTER_BYTE_TRANSMITTING))
{
TRACE("I2C WRITE ERROR: could not send register high address");
return false;
}
I2C_SendData(I2C, (uint8_t)(reg & 0x00FF));
if (!I2C_WaitEvent(I2C_EVENT_MASTER_BYTE_TRANSMITTING))
{
TRACE("I2C WRITE ERROR: could not send register low address");
return false;
}
/* While there is data to be written */
while (len--) {
I2C_SendData(I2C, *buf);
if (!I2C_WaitEvent(I2C_EVENT_MASTER_BYTE_TRANSMITTING))
{
TRACE("I2C WRITE ERROR: could not send data with %u bytes remaining", len+1 );
return false;
}
buf++;
}
if (!I2C_WaitEvent(I2C_EVENT_MASTER_BYTE_TRANSMITTED))
{
TRACE("I2C WRITE ERROR: waiting for BTF failed.");
return false;
}
I2C_GenerateSTOP(I2C, ENABLE);
return true;
@@ -564,35 +590,61 @@ uint8_t I2C_GT911_WriteRegister(uint16_t reg, uint8_t * buf, uint8_t len)
bool I2C_GT911_ReadRegister(u16 reg, uint8_t * buf, uint8_t len)
{
if (!I2C_WaitEventCleared(I2C_FLAG_BUSY))
{
TRACE("I2C READ ERROR: busy timeout");
return false;
}
I2C_GenerateSTART(I2C, ENABLE);
if (!I2C_WaitEvent(I2C_EVENT_MASTER_MODE_SELECT))
{
TRACE("I2C READ ERROR: could not issue first step start");
return false;
}
I2C_Send7bitAddress(I2C, GT_CMD_WR, I2C_Direction_Transmitter);
if (!I2C_WaitEvent(I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED))
{
TRACE("I2C READ ERROR: could not send first step device address");
return false;
}
I2C_SendData(I2C, (uint8_t)((reg & 0xFF00) >> 8));
if (!I2C_WaitEvent(I2C_EVENT_MASTER_BYTE_TRANSMITTING))
{
TRACE("I2C READ ERROR: could not send register high address");
return false;
}
I2C_SendData(I2C, (uint8_t)(reg & 0x00FF));
if (!I2C_WaitEvent(I2C_EVENT_MASTER_BYTE_TRANSMITTED))
{
TRACE("I2C READ ERROR: could not send register low address");
return false;
}
// see GP911 data sheet, chapter 6.1.c, page 12, diagram for reading data
// According to GP911 data sheet, repeated start is not listed, so we do full stop.
// See chapter 6.1.c, page 12, diagram for reading data
I2C_GenerateSTOP(I2C, ENABLE);
if (!I2C_WaitEventCleared(I2C_FLAG_BUSY))
{
TRACE("I2C READ ERROR: timeout waiting for first stop");
return false;
}
I2C_GenerateSTART(I2C, ENABLE);
if (!I2C_WaitEvent(I2C_EVENT_MASTER_MODE_SELECT))
{
TRACE("I2C READ ERROR: could not issue second step start");
return false;
}
I2C_Send7bitAddress(I2C, GT_CMD_RD, I2C_Direction_Receiver);
if (!I2C_WaitEvent(I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED))
{
TRACE("I2C READ ERROR: could not send second step device address");
return false;
}
if (len > 1) {
I2C_AcknowledgeConfig(I2C, ENABLE);
@@ -600,10 +652,13 @@ bool I2C_GT911_ReadRegister(u16 reg, uint8_t * buf, uint8_t len)
while (len) {
if (len == 1) {
I2C_AcknowledgeConfig(I2C, DISABLE);
I2C_AcknowledgeConfig(I2C, DISABLE); // Send NACK on last byte
}
if (!I2C_WaitEvent(I2C_EVENT_MASTER_BYTE_RECEIVED))
{
TRACE("I2C READ ERROR: could not read data with %u bytes remaining", len );
return false;
}
*buf++ = I2C_ReceiveData(I2C);
len--;
}
@@ -612,18 +667,30 @@ bool I2C_GT911_ReadRegister(u16 reg, uint8_t * buf, uint8_t len)
return true;
}
void I2C_GT911_SendConfig(uint8_t mode)
bool I2C_GT911_SendConfig(void)
{
uint8_t buf[2];
uint8_t i = 0;
buf[0] = 0;
buf[1] = mode;
buf[1] = 1;
bool bResult = true;
for (i = 0; i < sizeof(TOUCH_GT911_Cfg); i++)
buf[0] += TOUCH_GT911_Cfg[i];//check sum
buf[0] = (~buf[0]) + 1;
I2C_GT911_WriteRegister(GT_CFGS_REG, (uint8_t *) TOUCH_GT911_Cfg, sizeof(TOUCH_GT911_Cfg));//
I2C_GT911_WriteRegister(GT_CHECK_REG, buf, 2);//write checksum
if (!I2C_GT911_WriteRegister(GT_CFGS_REG, (uint8_t *) TOUCH_GT911_Cfg, sizeof(TOUCH_GT911_Cfg)))
{
TRACE("GT911 ERROR: write config failed");
bResult = false;
}
if (!I2C_GT911_WriteRegister(GT_CHECK_REG, buf, 2)) //write checksum
{
TRACE("GT911 ERROR: write config checksum failed");
bResult = false;
}
return bResult;
}
void touchPanelDeInit(void)
@@ -661,29 +728,55 @@ bool touchPanelInit(void)
delay_ms(50);
TRACE("Reading Touch registry");
I2C_GT911_ReadRegister(GT_PID_REG, tmp, 4);
if (!I2C_GT911_ReadRegister(GT_PID_REG, tmp, 4))
{
TRACE("GT911 ERROR: Product ID read failed");
}
if (strcmp((char *) tmp, "911") == 0) //ID==9147
{
TRACE("GT911 chip detected");
tmp[0] = 0X02;
I2C_GT911_WriteRegister(GT_CTRL_REG, tmp, 1);
I2C_GT911_ReadRegister(GT_CFGS_REG, tmp, 1);
if (!I2C_GT911_WriteRegister(GT_CTRL_REG, tmp, 1))
{
TRACE("GT911 ERROR: write to control register failed");
}
if (!I2C_GT911_ReadRegister(GT_CFGS_REG, tmp, 1))
{
TRACE("GT911 ERROR: configration register read failed");
}
TRACE("Chip config Ver:%x\r\n", tmp[0]);
TRACE("Chip config Ver:%x", tmp[0]);
if (tmp[0] <= GT911_CFG_NUMER) //Config ver
{
TRACE("Sending new config %d", GT911_CFG_NUMER);
I2C_GT911_SendConfig(1);
if (!I2C_GT911_SendConfig())
{
TRACE("GT911 ERROR: sending configration failed");
}
}
if (!I2C_GT911_ReadRegister(GT911_FIRMWARE_VERSION_REG, tmp, 2))
{
TRACE("GT911 ERROR: reading firmware version failed");
}
else
{
touchGT911fwver = (tmp[1] << 8) + tmp[0];
TRACE("GT911 FW version: %u", touchGT911fwver);
}
delay_ms(10);
tmp[0] = 0X00;
I2C_GT911_WriteRegister(GT_CTRL_REG, tmp, 1); //end reset
if (!I2C_GT911_WriteRegister(GT_CTRL_REG, tmp, 1)) //end reset
{
TRACE("GT911 ERROR: write to control register failed");
}
touchGT911Flag = true;
TOUCH_AF_ExtiConfig();
return true;
}
TRACE("GT911 chip NOT FOUND");
@@ -723,7 +816,8 @@ void touchPanelRead()
uint32_t startReadStatus = RTOS_GET_MS();
do {
if (!I2C_GT911_ReadRegister(GT911_READ_XY_REG, &state, 1)) {
ledRed();
//ledRed();
touchGT911hiccups++;
TRACE("GT911 I2C read XY error");
touchPanelDeInit();
touchPanelInit();
@@ -744,7 +838,8 @@ void touchPanelRead()
if (pointsCount > 0 && pointsCount <= GT911_MAX_TP) {
if (!I2C_GT911_ReadRegister(GT911_READ_XY_REG + 1, touchData.data,
pointsCount * sizeof(TouchPoint))) {
ledRed();
//ledRed();
touchGT911hiccups++;
TRACE("GT911 I2C data read error");
touchPanelDeInit();
touchPanelInit();
@@ -778,7 +873,10 @@ void touchPanelRead()
}
uint8_t zero = 0;
I2C_GT911_WriteRegister(GT911_READ_XY_REG, &zero, 1);
if (!I2C_GT911_WriteRegister(GT911_READ_XY_REG, &zero, 1))
{
TRACE("GT911 ERROR: clearing XY register failed");
}
TRACE("touch event = %s", event2str(touchState.event));
}