Directory transmitter renamed to radio
This commit is contained in:
Bertrand Songis
@@ -0,0 +1,229 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file Project/lcd/lcd.c
|
||||
* @author FrSky Application Team
|
||||
* @Hardware version V0.2
|
||||
* @date 11-July-2012
|
||||
* @brief This file provides LCD Init and botom drivers.
|
||||
* *
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
#include "../opentx.h"
|
||||
|
||||
#define WriteData(x) AspiData(x)
|
||||
#define WriteCommand(x) AspiCmd(x)
|
||||
#define CONTRAST_OFS 5
|
||||
|
||||
static void LCD_Init()
|
||||
{
|
||||
AspiCmd(0x2b); //Panel loading set ,Internal VLCD.
|
||||
AspiCmd(0x25); //Temperature compensation curve definition: 0x25 = -0.05%/oC
|
||||
AspiCmd(0xEA); //set bias=1/10 :Command table NO.27
|
||||
AspiCmd(0x81); //Set Vop
|
||||
AspiCmd(g_eeGeneral.contrast+CONTRAST_OFS); //0--255
|
||||
AspiCmd(0xA6); //inverse display off
|
||||
AspiCmd(0xD1); //SET RGB:Command table NO.21 .SET RGB or BGR. D1=RGB
|
||||
AspiCmd(0xD5); //set color mode 4K and 12bits :Command table NO.22
|
||||
AspiCmd(0xA0); //line rates,25.2 Klps
|
||||
AspiCmd(0xC8); //SET N-LINE INVERSION
|
||||
AspiCmd(0x1D); //Disable NIV
|
||||
AspiCmd(0xF1); //Set CEN
|
||||
AspiCmd(0x3F); // 1/64DUTY
|
||||
AspiCmd(0x84); //Disable Partial Display
|
||||
AspiCmd(0xC4); //MY=1,MX=0
|
||||
AspiCmd(0x89); //WA=1,column (CA) increment (+1) first until CA reaches CA boundary, then RA will increment by (+1).
|
||||
|
||||
AspiCmd(0xF8); //Set Window Program Enable ,inside modle
|
||||
AspiCmd(0xF4); //starting column address of RAM program window.
|
||||
AspiCmd(0x00);
|
||||
AspiCmd(0xF5); //starting row address of RAM program window.
|
||||
AspiCmd(0x60);
|
||||
AspiCmd(0xF6); //ending column address of RAM program window.
|
||||
AspiCmd(0x47);
|
||||
AspiCmd(0xF7); //ending row address of RAM program window.
|
||||
AspiCmd(0x9F);
|
||||
|
||||
|
||||
}
|
||||
|
||||
#if 0 // to be removed later if nobody complains!
|
||||
static void lcdRefreshInit()
|
||||
{
|
||||
AspiCmd(0x2b); //Panel loading set ,Internal VLCD.
|
||||
AspiCmd(0x25); //Temperature compensation curve definition: 0x25 = -0.05%/oC
|
||||
AspiCmd(0xEA); //set bias=1/10 :Command table NO.27
|
||||
AspiCmd(0x81); //Set Vop
|
||||
AspiCmd(g_eeGeneral.contrast+CONTRAST_OFS); //0--255
|
||||
AspiCmd(0xA6); //inverse display off
|
||||
AspiCmd(0xD1); //SET RGB:Command table NO.21 .SET RGB or BGR. D1=RGB
|
||||
AspiCmd(0xD5); //set color mode 4K and 12bits :Command table NO.22
|
||||
AspiCmd(0xA0); //line rates,25.2 Klps
|
||||
AspiCmd(0xC8); //SET N-LINE INVERSION
|
||||
AspiCmd(0x1D); //Disable NIV
|
||||
AspiCmd(0xF1); //Set CEN
|
||||
AspiCmd(0x3F); // 1/64DUTY
|
||||
AspiCmd(0x84); //Disable Partial Display
|
||||
AspiCmd(0xC4); //MY=1,MX=0
|
||||
AspiCmd(0x89); //WA=1,column (CA) increment (+1) first until CA reaches CA boundary, then RA will increment by (+1).
|
||||
|
||||
AspiCmd(0xF8); //Set Window Program Enable ,inside modle
|
||||
AspiCmd(0xF4); //starting column address of RAM program window.
|
||||
AspiCmd(0x00);
|
||||
AspiCmd(0xF5); //starting row address of RAM program window.
|
||||
AspiCmd(0x60);
|
||||
AspiCmd(0xF6); //ending column address of RAM program window.
|
||||
AspiCmd(0x47);
|
||||
AspiCmd(0xF7); //ending row address of RAM program window.
|
||||
AspiCmd(0x9F);
|
||||
AspiCmd(0xAF);
|
||||
}
|
||||
#endif
|
||||
|
||||
void Set_Address(u8 x, u8 y)
|
||||
{
|
||||
WriteCommand(x&0x0F); //Set Column Address LSB CA[3:0]
|
||||
WriteCommand((x>>4)|0x10); //Set Column Address MSB CA[7:4]
|
||||
|
||||
WriteCommand((y&0x0F)|0x60); //Set Row Address LSB RA [3:0]
|
||||
WriteCommand(((y>>4)&0x0F)|0x70); //Set Row Address MSB RA [7:4]
|
||||
}
|
||||
|
||||
#define PALETTE_IDX(p, x, mask) (((p[x] & mask) ? 0x1 : 0) + ((p[DISPLAY_PLAN_SIZE+x] & mask) ? 0x2 : 0) + ((p[2*DISPLAY_PLAN_SIZE+x] & mask) ? 0x4 : 0) + ((p[3*DISPLAY_PLAN_SIZE+x] & mask) ? 0x8 : 0))
|
||||
const uint8_t lcdPalette[4] = { 0, 0x03, 0x06, 0x0F };
|
||||
|
||||
#define LCD_WRITE_BIT(bit) \
|
||||
if (bit) \
|
||||
GPIOD->BSRRL = PIN_LCD_MOSI; \
|
||||
else \
|
||||
GPIOD->BSRRH = PIN_LCD_MOSI; \
|
||||
GPIOD->BSRRH = PIN_LCD_CLK; /* Clock low */ \
|
||||
__no_operation(); \
|
||||
GPIOD->BSRRL = PIN_LCD_CLK; /* Clock high */
|
||||
|
||||
void lcdRefresh()
|
||||
{
|
||||
for (uint32_t y=0; y<LCD_H; y++) {
|
||||
uint8_t *p = &displayBuf[(y>>3)*LCD_W];
|
||||
uint8_t mask = (1 << (y%8));
|
||||
|
||||
Set_Address(0, y);
|
||||
AspiCmd(0xAF);
|
||||
|
||||
LCD_CLK_HIGH();
|
||||
LCD_A0_HIGH();
|
||||
LCD_NCS_LOW();
|
||||
|
||||
for (uint32_t x=0; x<LCD_W; x++) {
|
||||
LCD_WRITE_BIT(p[3*DISPLAY_PLAN_SIZE+x] & mask);
|
||||
LCD_WRITE_BIT(p[2*DISPLAY_PLAN_SIZE+x] & mask);
|
||||
LCD_WRITE_BIT(p[DISPLAY_PLAN_SIZE+x] & mask);
|
||||
LCD_WRITE_BIT(p[x] & mask);
|
||||
}
|
||||
|
||||
LCD_NCS_HIGH();
|
||||
LCD_A0_HIGH();
|
||||
|
||||
WriteData(0);
|
||||
}
|
||||
}
|
||||
|
||||
/**Init the Backlight GPIO */
|
||||
static void LCD_BL_Config()
|
||||
{
|
||||
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOBL, ENABLE);
|
||||
GPIO_InitTypeDef GPIO_InitStructure;
|
||||
GPIO_InitStructure.GPIO_Pin =GPIO_Pin_BL;
|
||||
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
|
||||
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
|
||||
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
|
||||
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
|
||||
GPIO_Init(GPIOBL, &GPIO_InitStructure);
|
||||
|
||||
GPIO_PinAFConfig(GPIOBL, GPIO_PinSource_BL, GPIO_AF_TIM10);
|
||||
|
||||
RCC->APB2ENR |= RCC_APB2ENR_TIM10EN ; // Enable clock
|
||||
TIM10->ARR = 100 ;
|
||||
TIM10->PSC = (PERI2_FREQUENCY * TIMER_MULT_APB2) / 10000 - 1;
|
||||
TIM10->CCMR1 = 0x60 ; // PWM
|
||||
TIM10->CCER = 1 ;
|
||||
|
||||
TIM10->CCR1 = 80;
|
||||
TIM10->EGR = 0 ;
|
||||
TIM10->CR1 = 1 ;
|
||||
}
|
||||
|
||||
/** Init the anolog spi gpio
|
||||
*/
|
||||
static void LCD_Hardware_Init()
|
||||
{
|
||||
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_LCD, ENABLE);
|
||||
|
||||
GPIO_InitTypeDef GPIO_InitStructure;
|
||||
|
||||
/*!< Configure lcd CLK\ MOSI\ A0pin in output pushpull mode *************/
|
||||
GPIO_InitStructure.GPIO_Pin =PIN_LCD_MOSI | PIN_LCD_CLK | PIN_LCD_A0;
|
||||
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT;
|
||||
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
|
||||
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
|
||||
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
|
||||
GPIO_Init(GPIO_LCD, &GPIO_InitStructure);
|
||||
LCD_NCS_HIGH();
|
||||
/*!< Configure lcd NCS pin in output pushpull mode ,PULLUP *************/
|
||||
GPIO_InitStructure.GPIO_Pin = PIN_LCD_NCS |PIN_LCD_RST;
|
||||
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT;
|
||||
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
|
||||
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
|
||||
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP;
|
||||
|
||||
GPIO_Init(GPIO_LCD, &GPIO_InitStructure);
|
||||
}
|
||||
|
||||
//275us
|
||||
void Delay(volatile unsigned int ms)
|
||||
{
|
||||
volatile u8 i;
|
||||
while(ms != 0)
|
||||
{
|
||||
for(i=0;i<250;i++) {}
|
||||
for(i=0;i<75;i++) {}
|
||||
ms--;
|
||||
}
|
||||
}
|
||||
|
||||
void LCD_OFF()
|
||||
{
|
||||
AspiCmd(0xE2);
|
||||
Delay(20);
|
||||
}
|
||||
|
||||
void lcdInit()
|
||||
{
|
||||
LCD_BL_Config();
|
||||
LCD_Hardware_Init();
|
||||
|
||||
LCD_RST_HIGH();
|
||||
Delay(5);
|
||||
|
||||
LCD_RST_LOW();
|
||||
Delay(120); //11ms
|
||||
|
||||
LCD_RST_HIGH();
|
||||
Delay(2500);
|
||||
|
||||
AspiCmd(0xE2);
|
||||
Delay(2500);
|
||||
LCD_Init();
|
||||
Delay(120);
|
||||
|
||||
LCD_Init();
|
||||
Delay(120);
|
||||
AspiCmd(0xAF); //dc2=1, IC into exit SLEEP MODE, dc3=1 gray=ON, dc4=1 Green Enhanc mode disabled
|
||||
}
|
||||
|
||||
void lcdSetRefVolt(uint8_t val)
|
||||
{
|
||||
AspiCmd(0x81); //Set Vop
|
||||
AspiCmd(val+CONTRAST_OFS); //0--255
|
||||
}
|
||||
|
||||
Reference in New Issue
Block a user