From a2235f1bda1d194e4ac03c5bd149b55d1655395b Mon Sep 17 00:00:00 2001 From: bsongis Date: Wed, 5 Mar 2014 11:54:03 +0100 Subject: [PATCH] 2 more files removed --- radio/bootloader/include/board.h | 714 ------------------------------- radio/bootloader/include/chip.h | 130 ------ 2 files changed, 844 deletions(-) delete mode 100644 radio/bootloader/include/board.h delete mode 100644 radio/bootloader/include/chip.h diff --git a/radio/bootloader/include/board.h b/radio/bootloader/include/board.h deleted file mode 100644 index 0af66e835..000000000 --- a/radio/bootloader/include/board.h +++ /dev/null @@ -1,714 +0,0 @@ -/* ---------------------------------------------------------------------------- - * ATMEL Microcontroller Software Support - * ---------------------------------------------------------------------------- - * Copyright (c) 2009, Atmel Corporation - * - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * - Redistributions of source code must retain the above copyright notice, - * this list of conditions and the disclaimer below. - * - * Atmel's name may not be used to endorse or promote products derived from - * this software without specific prior written permission. - * - * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE - * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, - * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * ---------------------------------------------------------------------------- - */ - -//------------------------------------------------------------------------------ -/** - * \page sam3s_ek_board_desc "SAM3S-EK - Board Description" - * - * \section - * A file is dedicated to descibe the AT91SAM3S-EK board. - * - * \section Contents - * - The code for booting the board is provided by board_cstartup.S and - * board_lowlevel.c. - * - For using board PIOs, board characteristics (clock, etc.) and external - * components, see board.h. - * - For manipulating memories (remapping, SDRAM, etc.), see board_memories.h. - * - * To get more software details and the full list of parameters related to the - * SAM3S-EK board configuration, please have a look at the source file: \n - * \ref board.h\n - * - * This file can be used as a template and modified to fit a custom board, with - * specific PIOs usage or memory connections. - **/ -//------------------------------------------------------------------------------ - - -//------------------------------------------------------------------------------ -/// \file board.h -/// -/// \par Purpose -/// -/// Definition of AT91SAM3S-EK characteristics, AT91SAM3S-dependant PIOs and -/// external components interfacing. -/// -/// \par Usage -/// -# For operating frequency information, see "SAM3S-EK - Operating frequencies". -/// -# For using portable PIO definitions, see "SAM3S-EK - PIO definitions". -/// -# Several USB definitions are included here (see "SAM3S-EK - USB device"). -//------------------------------------------------------------------------------ - -#ifndef BOARD_H -#define BOARD_H - -//------------------------------------------------------------------------------ -// Headers -//------------------------------------------------------------------------------ - -/* These headers were introduced in C99 by working group ISO/IEC JTC1/SC22/WG14. */ -#include - -#ifdef SIMU -#define CONVERT_PTR(x) ((uint32_t)(uint64_t)(x)) -#else -//#include "core_cm3.h" -#define CONVERT_PTR(x) ((uint32_t)(x)) -#endif - -#ifndef SIMU -#include -#if defined(at91sam3s4) - #include "chip.h" - #include "AT91SAM3S4.h" -#else - #if defined(at91sam3s8) - #include "chip.h" - #include "AT91SAM3S4.h" - #else - #error Board does not support the specified chip. - #endif -#endif -#endif - -//------------------------------------------------------------------------------ -// Definitions -//------------------------------------------------------------------------------ - -//------------------------------------------------------------------------------ -/// \par -/// This page lists several definition related to the board description. -/// -/// Definitions -/// - BOARD_NAME - -/// Name of the board. -#define BOARD_NAME "AT91SAM3S-EK" -/// Board definition. -#define at91sam3sek -/// Family definition (already defined). -#define at91sam3s -/// Core definition -#define cortexm3 - -//#define BOARD_REV_A -#define BOARD_REV_B - -//------------------------------------------------------------------------------ - -//------------------------------------------------------------------------------ -/// \par sam3s_ek_opfreq "SAM3S-EK - Operating frequencies" -/// This page lists several definition related to the board operating frequency -/// (when using the initialization done by board_lowlevel.c). -/// -/// !Definitions -/// - BOARD_MAINOSC -/// - BOARD_MCK - -/// Frequency of the board main oscillator. -#define BOARD_MAINOSC 12000000 - -/// Master clock frequency (when using board_lowlevel.c). -//#define BOARD_MCK 48000000 -#define BOARD_MCK 64000000 - -//------------------------------------------------------------------------------ -// ADC -//------------------------------------------------------------------------------ - -/// Startup time max, return from Idle mode (in µs) -#define ADC_STARTUP_TIME_MAX 15 -/// Track and hold Acquisition Time min (in ns) -#define ADC_TRACK_HOLD_TIME_MIN 1200 - -//------------------------------------------------------------------------------ - -//------------------------------------------------------------------------------ -/// USB attributes configuration descriptor (bus or self powered, remote wakeup) -//#define BOARD_USB_BMATTRIBUTES USBConfigurationDescriptor_SELFPOWERED_RWAKEUP -#define BOARD_USB_BMATTRIBUTES USBConfigurationDescriptor_SELFPOWERED_NORWAKEUP -//------------------------------------------------------------------------------ - -//------------------------------------------------------------------------------ -/// \par sam3s_ek_piodef "SAM3S-EK - PIO definitions" -/// This pages lists all the pio definitions contained in board.h. The constants -/// are named using the following convention: PIN_* for a constant which defines -/// a single Pin instance (but may include several PIOs sharing the same -/// controller), and PINS_* for a list of Pin instances. -/// -/// !ADC -/// - PIN_ADC0_AD0 -/// - PIN_ADC0_AD1 -/// - PIN_ADC0_AD2 -/// - PIN_ADC0_AD3 -/// - PIN_ADC0_AD4 -/// - PIN_ADC0_AD5 -/// - PIN_ADC0_AD6 -/// - PIN_ADC0_AD7 -/// - PINS_ADC0 -/// -/// !UART -/// - PINS_UART -/// -/// !EBI -/// - PIN_EBI_DATA_BUS -/// - PIN_EBI_NCS0 -/// - PIN_EBI_NRD -/// - PIN_EBI_NWE -/// - PIN_EBI_ADDR_BUS -/// - PIN_EBI_PSRAM_NBS -/// - PIN_EBI_A1 -/// - PIN_EBI_LCD_RS -/// -/// !LEDs -/// - PIN_LED_0 -/// - PIN_LED_1 -/// - PIN_LED_2 -/// - PINS_LEDS -/// -/// !MCI -/// - PINS_MCI -/// -/// !Push buttons -/// - PIN_PUSHBUTTON_1 -/// - PIN_PUSHBUTTON_2 -/// - PINS_PUSHBUTTONS -/// - PUSHBUTTON_BP1 -/// - PUSHBUTTON_BP2 -/// -/// !PWMC -/// - PIN_PWMC_PWMH0 -/// - PIN_PWMC_PWML0 -/// - PIN_PWMC_PWMH1 -/// - PIN_PWMC_PWML1 -/// - PIN_PWMC_PWMH2 -/// - PIN_PWMC_PWML2 -/// - PIN_PWMC_PWMH3 -/// - PIN_PWMC_PWML3 -/// - PIN_PWM_LED0 -/// - PIN_PWM_LED1 -/// - PIN_PWM_LED2 -/// - CHANNEL_PWM_LED0 -/// - CHANNEL_PWM_LED1 -/// - CHANNEL_PWM_LED2 -/// -/// !SPI -/// - PIN_SPI_MISO -/// - PIN_SPI_MOSI -/// - PIN_SPI_SPCK -/// - PINS_SPI -/// - PIN_SPI_NPCS0_PA11 -/// -/// ! SSC -/// - PIN_SSC_TD -/// - PIN_SSC_TK -/// - PIN_SSC_TF -/// - PINS_SSC_CODEC -/// -/// ! PCK0 -/// - PIN_PCK0 -/// -/// !TWI -/// - PIN_TWI_TWD0 -/// - PIN_TWI_TWCK0 -/// - PINS_TWI -/// -/// !USART0 -/// - PIN_USART0_RXD -/// - PIN_USART0_TXD -/// - PIN_USART0_CTS -/// - PIN_USART0_RTS -/// - PIN_USART0_SCK -/// -/// !USB -/// - PIN_USB_PULLUP -/// - -/// ADC_AD0 pin definition. -#define PIN_ADC0_AD0 {1 << 21, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT} -/// ADC_AD1 pin definition. -#define PIN_ADC0_AD1 {1 << 30, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT} -/// ADC_AD2 pin definition. -#define PIN_ADC0_AD2 {1 << 3, PIOB, ID_PIOB, PIO_INPUT, PIO_DEFAULT} -/// ADC_AD3 pin definition. -#define PIN_ADC0_AD3 {1 << 4, PIOB, ID_PIOB, PIO_INPUT, PIO_DEFAULT} -/// ADC_AD4 pin definition. -#define PIN_ADC0_AD4 {1 << 15, PIOC, ID_PIOC, PIO_INPUT, PIO_DEFAULT} -/// ADC_AD5 pin definition. -#define PIN_ADC0_AD5 {1 << 16, PIOC, ID_PIOC, PIO_INPUT, PIO_DEFAULT} -/// ADC_AD6 pin definition. -#define PIN_ADC0_AD6 {1 << 17, PIOC, ID_PIOC, PIO_INPUT, PIO_DEFAULT} -/// ADC_AD7 pin definition. -#define PIN_ADC0_AD7 {1 << 18, PIOC, ID_PIOC, PIO_INPUT, PIO_DEFAULT} - -/// Pins ADC -#define PINS_ADC PIN_ADC0_AD0, PIN_ADC0_AD1, PIN_ADC0_AD2, PIN_ADC0_AD3, PIN_ADC0_AD4, PIN_ADC0_AD5, PIN_ADC0_AD6, PIN_ADC0_AD7 - -/** UART pins (UTXD0 and URXD0) definitions, PA9,10. */ -#define PINS_UART {0x00000600, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} - -/// EBI -#define PIN_EBI_DATA_BUS {0xFF, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_PULLUP} -#define PIN_EBI_NRD {1 << 11, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_PULLUP} -#define PIN_EBI_NWE {1 << 8, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_PULLUP} - -#define PIN_EBI_NCS0 {1 << 20, PIOB, ID_PIOB, PIO_PERIPH_A, PIO_PULLUP} -#define PIN_EBI_PSRAM_ADDR_BUS {0x3f00fff, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_PULLUP} -#define PIN_EBI_PSRAM_NBS {1 << 7, PIOB, ID_PIOB, PIO_PERIPH_B, PIO_PULLUP}, \ - {1 << 15, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_PULLUP} -#define PIN_EBI_A1 {1 << 19, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_PULLUP} - -#define PIN_EBI_NCS1 {1 << 15, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_PULLUP} /* LCD CS pin */ -#define PIN_EBI_LCD_RS {1 << 19, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_PULLUP} /* LCD RS pin */ - -#ifdef BOARD_REV_A -/** LED #0 pin definition. */ -#define PIN_LED_0 {1 << 20, PIOC, ID_PIOC, PIO_OUTPUT_1, PIO_DEFAULT} -/** LED #1 pin definition. */ -#define PIN_LED_1 {1 << 21, PIOC, ID_PIOC, PIO_OUTPUT_1, PIO_DEFAULT} -/** LED #2 pin definition. */ -#define PIN_LED_2 {1 << 22, PIOC, ID_PIOC, PIO_OUTPUT_1, PIO_DEFAULT} -#endif -#ifdef BOARD_REV_B -/** LED #0 pin definition. */ -#define PIN_LED_0 {1 << 19, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT} -/** LED #1 pin definition. */ -#define PIN_LED_1 {1 << 20, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT} -/** LED #2 pin definition. */ -#define PIN_LED_2 {1 << 20, PIOC, ID_PIOC, PIO_OUTPUT_1, PIO_DEFAULT} -#endif - -/** List of all LEDs definitions. */ -#define PINS_LEDS PIN_LED_0, PIN_LED_1, PIN_LED_2 - -/// MCI pins definition. -#define PINS_MCI {0x1f8, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_PULLUP}, \ - {1 << 3, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} - -/// MCI pin Card Detect -#define PIN_MCI_CD \ - {AT91C_PIO_PA25, PIOA, ID_PIOA, PIO_INPUT, PIO_PULLUP} - -/** Push button #0 definition. Attributes = pull-up + debounce + interrupt on rising edge. */ -#define PIN_PUSHBUTTON_1 {1 << 3, PIOB, ID_PIOB, PIO_INPUT, PIO_PULLUP | PIO_DEBOUNCE} -/** Push button #1 definition. Attributes = pull-up + debounce + interrupt on falling edge. */ -#define PIN_PUSHBUTTON_2 {1 << 12, PIOC, ID_PIOC, PIO_INPUT, PIO_PULLUP | PIO_DEBOUNCE} -/** List of all push button definitions. */ -#define PINS_PUSHBUTTONS PIN_PUSHBUTTON_1, PIN_PUSHBUTTON_2 - -/** Push button #1 index. */ -#define PUSHBUTTON_BP1 0 -/** Push button #2 index. */ -#define PUSHBUTTON_BP2 1 - -/// Simulated joystick LEFT index. -#define JOYSTICK_LEFT 0 -/// Simulated joystick RIGHT index. -#define JOYSTICK_RIGHT 1 - -/** PWMC PWM0 pin definition. */ -#define PIN_PWMC_PWMH0 {1 << 18, PIOC, ID_PIOC, PIO_PERIPH_B, PIO_DEFAULT} -#define PIN_PWMC_PWML0 {1 << 19, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT} -/** PWMC PWM1 pin definition. */ -#define PIN_PWMC_PWMH1 {1 << 19, PIOC, ID_PIOC, PIO_PERIPH_B, PIO_DEFAULT} -#define PIN_PWMC_PWML1 {1 << 20, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT} -/** PWMC PWM2 pin definition. */ -#define PIN_PWMC_PWMH2 {1 << 20, PIOC, ID_PIOC, PIO_PERIPH_B, PIO_DEFAULT} -#define PIN_PWMC_PWML2 {1 << 16, PIOA, ID_PIOA, PIO_PERIPH_C, PIO_DEFAULT} -/** PWMC PWM3 pin definition. */ -#define PIN_PWMC_PWMH3 {1 << 21, PIOC, ID_PIOC, PIO_PERIPH_B, PIO_DEFAULT} -#define PIN_PWMC_PWML3 {1 << 15, PIOA, ID_PIOA, PIO_PERIPH_C, PIO_DEFAULT} -/** PWM pin definition for LED0 */ -#define PIN_PWM_LED0 PIN_PWMC_PWMH0, PIN_PWMC_PWML0 -/** PWM pin definition for LED1 */ -#define PIN_PWM_LED1 PIN_PWMC_PWMH2, PIN_PWMC_PWML2 -/** PWM pin definition for LED2 */ -#define PIN_PWM_LED2 PIN_PWMC_PWMH3, PIN_PWMC_PWML3 -/** PWM channel for LED0 */ -#define CHANNEL_PWM_LED0 0 -/** PWM channel for LED1 */ -#define CHANNEL_PWM_LED1 2 -/** PWM channel for LED2 */ -#define CHANNEL_PWM_LED2 3 - -/** SPI MISO pin definition. */ -#define PIN_SPI_MISO {1 << 12, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} -/** SPI MOSI pin definition. */ -#define PIN_SPI_MOSI {1 << 13, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} -/** SPI SPCK pin definition. */ -#define PIN_SPI_SPCK {1 << 14, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} -/** SPI chip select pin definition. */ -#define PIN_SPI_NPCS0_PA11 {1 << 11, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} -/** List of SPI pin definitions (MISO, MOSI & SPCK). */ -#define PINS_SPI PIN_SPI_MISO, PIN_SPI_MOSI, PIN_SPI_SPCK - -/// SSC pins definition. -#define PIN_SSC_TD {0x1 << 26, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} -#define PIN_SSC_TK {0x1 << 28, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} -#define PIN_SSC_TF {0x1 << 30, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} -#define PINS_SSC_CODEC PIN_SSC_TD, PIN_SSC_TK, PIN_SSC_TF - -/// PCK0 -#define PIN_PCK0 {0x1 << 21, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT} - -/// TWI pins definition. -#define TWI_V3XX -#define PIN_TWI_TWD0 {0x1 << 9, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} -#define PIN_TWI_TWCK0 {0x1 << 10, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} -#define PINS_TWI0 PIN_TWI_TWD0, PIN_TWI_TWCK0 -#define PIN_TWI_TWD1 {0x1 << 24, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} -#define PIN_TWI_TWCK1 {0x1 << 25, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} -#define PINS_TWI1 PIN_TWI_TWD1, PIN_TWI_TWCK1 - -/// USART0 -#define PIN_USART0_RXD {0x1 << 19, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} -#define PIN_USART0_TXD {0x1 << 18, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} -#define PIN_USART0_CTS {0x1 << 8, PIOB, ID_PIOB, PIO_PERIPH_A, PIO_DEFAULT} -#define PIN_USART0_RTS {0x1 << 7, PIOB, ID_PIOB, PIO_PERIPH_A, PIO_DEFAULT} -#define PIN_USART0_SCK {0x1 << 17, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} - -/// USART1 -#define PIN_USART1_RXD {0x1 << 21, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} -#define PIN_USART1_TXD {0x1 << 22, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} -#define PIN_USART1_CTS {0x1 << 25, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} -#define PIN_USART1_RTS {0x1 << 24, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} -#define PIN_USART1_EN {0x1 << 23, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT} - - - -/// USB VBus monitoring pin definition. -#ifdef BOARD_REV_A -#define PIN_USB_VBUS {1 << 23, PIOC, ID_PIOC, PIO_INPUT, PIO_DEFAULT} -#endif -#ifdef BOARD_REV_B -#define PIN_USB_VBUS {1 << 21, PIOC, ID_PIOC, PIO_INPUT, PIO_DEFAULT} -#endif - -//------------------------------------------------------------------------------ - -//------------------------------------------------------------------------------ -/// \par sam3s_ek_extcomp "SAM3S-EK - External components" -/// This page lists the definitions related to external on-board components -/// located in the board.h file for the AT91SAM3S-EK. -/// -/// !AT45 Dataflash Card -/// - BOARD_AT45_A_SPI_BASE -/// - BOARD_AT45_A_SPI_ID -/// - BOARD_AT45_A_SPI_PINS -/// - BOARD_AT45_A_SPI -/// - BOARD_AT45_A_NPCS -/// - BOARD_AT45_A_NPCS_PIN -/// -/// !AT45 Dataflash (serial onboard DataFlash) -/// - BOARD_AT45_B_SPI_BASE -/// - BOARD_AT45_B_SPI_ID -/// - BOARD_AT45_B_SPI_PINS -/// - BOARD_AT45_B_SPI -/// - BOARD_AT45_B_NPCS -/// - BOARD_AT45_B_NPCS_PIN -/// -/// !AT26 Serial Flash -/// - BOARD_AT26_A_SPI_BASE -/// - BOARD_AT26_A_SPI_ID -/// - BOARD_AT26_A_SPI_PINS -/// - BOARD_AT26_A_SPI -/// - BOARD_AT26_A_NPCS -/// - BOARD_AT26_A_NPCS_PIN -/// -/// !SD Card -/// - MCI2_INTERFACE -/// - BOARD_SD_MCI_BASE -/// - BOARD_SD_MCI_ID -/// - BOARD_SD_PINS -/// - BOARD_SD_SLOT -/// -/// !PSRAM -/// - BOARD_PSRAM_PINS -/// -/// !LCD -/// - BOARD_LCD_ILI9325 -/// - BOARD_LCD_PINS -/// - BOARD_BACKLIGHT_PIN -/// - BOARD_LCD_BASE -/// - BOARD_LCD_RS -/// - BOARD_LCD_WIDTH -/// - BOARD_LCD_HEIGHT -/// -/// !TouchScreen -/// - BOARD_TSC_ADS7843 -/// - PIN_TCS_IRQ -/// - PIN_TCS_BUSY -/// - BOARD_TSC_SPI_BASE -/// - BOARD_TSC_SPI_ID -/// - BOARD_TSC_SPI_PINS -/// - BOARD_TSC_NPCS -/// - BOARD_TSC_NPCS_PIN -/// -/// Base address of SPI peripheral connected to the dataflash. -//#define BOARD_AT45_A_SPI_BASE SPI0 -///// Identifier of SPI peripheral connected to the dataflash. -//#define BOARD_AT45_A_SPI_ID ID_SPI0 -///// Pins of the SPI peripheral connected to the dataflash. -//#define BOARD_AT45_A_SPI_PINS PINS_SPI0 -///// Dataflahs SPI number. -//#define BOARD_AT45_A_SPI 0 -///// Chip select connected to the dataflash. -//#define BOARD_AT45_A_NPCS 3 -///// Chip select pin connected to the dataflash. -//#define BOARD_AT45_A_NPCS_PIN PIN_SPI0_NPCS3 - -/// Base address of SPI peripheral connected to the dataflash. -//#define BOARD_AT45_B_SPI_BASE SPI1 -///// Identifier of SPI peripheral connected to the dataflash. -//#define BOARD_AT45_B_SPI_ID ID_SPI1 -///// Pins of the SPI peripheral connected to the dataflash. -//#define BOARD_AT45_B_SPI_PINS PINS_SPI1 -///// Dataflahs SPI number. -//#define BOARD_AT45_B_SPI 1 -///// Chip select connected to the dataflash. -//#define BOARD_AT45_B_NPCS 3 -///// Chip select pin connected to the dataflash. -//#define BOARD_AT45_B_NPCS_PIN PIN_SPI1_NPCS3 - -/// Base address of SPI peripheral connected to the serialflash. -//#define BOARD_AT26_A_SPI_BASE SPI0 -///// Identifier of SPI peripheral connected to the serialflash. -//#define BOARD_AT26_A_SPI_ID ID_SPI0 -///// Pins of the SPI peripheral connected to the serialflash. -//#define BOARD_AT26_A_SPI_PINS PINS_SPI0 -///// Serialflash SPI number. -//#define BOARD_AT26_A_SPI 0 -///// Chip select connected to the serialflash. -//#define BOARD_AT26_A_NPCS 3 -///// Chip select pin connected to the serialflash. -//#define BOARD_AT26_A_NPCS_PIN PIN_SPI0_NPCS3 - -/// ISO7816 -/// - PIN_SMARTCARD_CONNECT -/// - PIN_ISO7816_RSTMC -/// - PINS_ISO7816 - -/// Smartcard detection pin -//#define PIN_SMARTCARD_CONNECT {1 << 5, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT} -/// PIN used for reset the smartcard -//#define PIN_ISO7816_RSTMC {1 << 7, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT} -/// Pins used for connect the smartcard -//#define PINS_ISO7816 PIN_USART0_TXD, PIN_USART0_SCK, PIN_ISO7816_RSTMC - -/// Dma channel number -#define BOARD_MCI_DMA_CHANNEL 0 -/// MCI0 DMA hardware handshaking ID -#define DMA_HW_SRC_REQ_ID_MCI0 AT91C_HDMA_SRC_PER_0 -#define DMA_HW_DEST_REQ_ID_MCI0 AT91C_HDMA_DST_PER_0 -/// MCI1 DMA hardware handshaking ID -#define DMA_HW_SRC_REQ_ID_MCI1 AT91C_HDMA_SRC_PER_13 -#define DMA_HW_DEST_REQ_ID_MCI1 AT91C_HDMA_DST_PER_13 -/// SD DMA hardware handshaking ID -#define BOARD_SD_DMA_HW_SRC_REQ_ID DMA_HW_SRC_REQ_ID_MCI0 -#define BOARD_SD_DMA_HW_DEST_REQ_ID DMA_HW_DEST_REQ_ID_MCI0 - - -/// HS MCI interface -#define MCI2_INTERFACE -/// Base address of the MCI peripheral connected to the SD card. -#define BOARD_SD_MCI_BASE MCI0//MCI -///// Peripheral identifier of the MCI connected to the SD card. -#define BOARD_SD_MCI_ID ID_MCI0 //ID_MCI -///// MCI pins that shall be configured to access the SD card. -#define BOARD_SD_PINS PINS_MCI -///// MCI slot to which the SD card is connected to. -#define BOARD_SD_SLOT MCI_SD_SLOTA -///// MCI Card Detect pin. -#define BOARD_SD_PIN_CD PIN_MCI_CD - -/* -#define BOARD_PSRAM_PINS PIN_EBI_DATA_BUS, PIN_EBI_NCS0, PIN_EBI_NRD, PIN_EBI_NWE, \ - PIN_EBI_PSRAM_ADDR_BUS, PIN_EBI_PSRAM_NBS, PIN_EBI_A1 -*/ - -/** Indicates board has an ILI9325 external component to manage LCD. */ -#define BOARD_LCD_ILI9325 - -/** LCD pins definition. */ -#define BOARD_LCD_PINS PIN_EBI_DATA_BUS, PIN_EBI_NRD, PIN_EBI_NWE, \ - PIN_EBI_NCS1, PIN_EBI_LCD_RS -/** Backlight pin definition. */ -#define BOARD_BACKLIGHT_PIN {1 << 13, PIOC, ID_PIOC, PIO_OUTPUT_0, PIO_DEFAULT} -/** Define ILI9325 base address. */ -#define BOARD_LCD_BASE 0x61000000 -/** Define ILI9325 register select signal. */ -#define BOARD_LCD_RS (1 << 1) -/** Display width in pixels. */ -#define BOARD_LCD_WIDTH 240 -/** Display height in pixels. */ -#define BOARD_LCD_HEIGHT 320 - -/** Indicates board has an ADS7843 external component to manage Touch Screen */ -#define BOARD_TSC_ADS7843 - -#ifdef BOARD_REV_A -/** Touchscreen controller IRQ pin definition. */ -#define PIN_TCS_IRQ {PIO_PA4, PIOA, ID_PIOA, PIO_INPUT, PIO_DEBOUNCE | PIO_IT_AIME | PIO_IT_EDGE} -#define PIN_TCS_IRQ_WUP_ID (1 << 3) -/** Touchscreen controller Busy pin definition. */ -#define PIN_TCS_BUSY {PIO_PA5, PIOA, ID_PIOA, PIO_INPUT, PIO_PULLUP} -#endif -#ifdef BOARD_REV_B -/** Touchscreen controller IRQ pin definition. */ -#define PIN_TCS_IRQ {PIO_PA16, PIOA, ID_PIOA, PIO_INPUT, PIO_DEBOUNCE | PIO_IT_AIME | PIO_IT_EDGE} -#define PIN_TCS_IRQ_WUP_ID (1 << 15) -/** Touchscreen controller Busy pin definition. */ -#define PIN_TCS_BUSY {PIO_PA17, PIOA, ID_PIOA, PIO_INPUT, PIO_PULLUP} -#endif - -/** Base address of SPI peripheral connected to the touchscreen controller. */ -#define BOARD_TSC_SPI_BASE SPI -/** Identifier of SPI peripheral connected to the touchscreen controller. */ -#define BOARD_TSC_SPI_ID ID_SPI -/** Pins of the SPI peripheral connected to the touchscreen controller. */ -#define BOARD_TSC_SPI_PINS PINS_SPI -/** Chip select connected to the touchscreen controller. */ -#define BOARD_TSC_NPCS 0 -/** Chip select pin connected to the touchscreen controller. */ -#define BOARD_TSC_NPCS_PIN PIN_SPI_NPCS0_PA11 - -//------------------------------------------------------------------------------ - -//------------------------------------------------------------------------------ -/// \par sam3s_ek_mem "SAM3S-EK - Memories" -/// This page lists definitions related to internal & external on-board memories. -/// -/// !Embedded Flash -/// - BOARD_FLASH_EFC - -/// Internal SRAM address -#define AT91C_ISRAM AT91C_IRAM -#define AT91C_ISRAM_SIZE 0x00008000 - -#define AT91C_IFLASH_SIZE (0x40000) -#define AT91C_IFLASH_PAGE_SIZE (256) // Internal FLASH 0 Page Size: 256 bytes -#define AT91C_IFLASH_NB_OF_PAGES (1024) // Internal FLASH 0 Number of Pages: 512 -#define AT91C_IFLASH_LOCK_REGION_SIZE (16384) // Internal FLASH 0 Lock Region Size: 16 Kbytes -#define AT91C_IFLASH_NB_OF_LOCK_BITS (16) // Internal FLASH 0 Number of Lock Bits: 16 - -//------------------------------------------------------------------------------ - - -//------------------------------------------------------------------------------ -/// \section sam3s_ek_extcomp "SAM3S-EK - External components" -/// This page lists the definitions related to external on-board components -/// located in the board.h file for the SAM3S-EK. -/// -//------------------------------------------------------------------------------ - -//------------------------------------------------------------------------------ -/// \par sam3s_ek_chipdef "SAM3S-EK - Individual chip definition" -/// This page lists the definitions related to different chip's definition -/// located in the board.h file for the SAM3S-EK. - -/// DBGU -#define BOARD_DBGU_ID ID_DBGU - -/// Rtc -#define BOARD_RTC_ID ID_RTC - -/// Twi eeprom -#define BOARD_ID_TWI_EEPROM ID_TWI1 -#define BOARD_BASE_TWI_EEPROM TWI1 -#define BOARD_PINS_TWI_EEPROM PINS_TWI1 - -/// USART -#define BOARD_PIN_USART_RXD PIN_USART1_RXD -#define BOARD_PIN_USART_TXD PIN_USART1_TXD -#define BOARD_PIN_USART_CTS PIN_USART1_CTS -#define BOARD_PIN_USART_RTS PIN_USART1_RTS -#define BOARD_PIN_USART_EN PIN_USART1_EN -#define BOARD_USART_BASE USART1 -#define BOARD_ID_USART ID_USART1 - -//------------------------------------------------------------------------------ - - -#define PIN_EBI_NANDOE {1 << 9, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_PULLUP} -#define PIN_EBI_NANDWE {1 << 10, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_PULLUP} -#define PIN_EBI_NANDCLE {1 << 17, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_PULLUP} -#define PIN_EBI_NANDALE {1 << 16, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_PULLUP} -#define PIN_EBI_NANDIO {0x000000FF, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_PULLUP} - -/// Nandflash chip enable pin definition. -#define BOARD_NF_CE_PIN {1 << 14, PIOC, ID_PIOC, PIO_OUTPUT_1, PIO_DEFAULT} -/// Nandflash ready/busy pin definition. -#define BOARD_NF_RB_PIN {1 << 18, PIOC, ID_PIOC, PIO_INPUT, PIO_PULLUP} - -/// Nandflash controller peripheral pins definition. -#define PINS_NANDFLASH PIN_EBI_NANDIO, BOARD_NF_CE_PIN, BOARD_NF_RB_PIN, PIN_EBI_NANDOE, \ - PIN_EBI_NANDWE, PIN_EBI_NANDCLE, PIN_EBI_NANDALE - -/// Address for transferring command bytes to the nandflash. -#define BOARD_NF_COMMAND_ADDR 0x60400000 -/// Address for transferring address bytes to the nandflash. -#define BOARD_NF_ADDRESS_ADDR 0x60200000 -/// Address for transferring data bytes to the nandflash. -#define BOARD_NF_DATA_ADDR 0x60000000 - -extern uint32_t Cmd_A41_resp ; - -#define OCR_SD_CCS (1UL << 30) - -#define SD_CSD(csd, bitfield, bits) ((csd[3-(bitfield)/32] >> ((bitfield)%32)) & ((1 << (bits)) - 1)) - -#define SD_CSD_C_SIZE(pSd) ((SD_CSD(pSd, 72, 2) << 10) + \ - (SD_CSD(pSd, 64, 8) << 2) + \ - SD_CSD(pSd, 62, 2)) ///< Device size - -#define SD_CSD_C_SIZE_HC(csd) ((SD_CSD(csd, 64, 6) << 16) + \ - (SD_CSD(csd, 56, 8) << 8) + \ - SD_CSD(csd, 48, 8)) ///< Device size v2.0 High Capacity - -#define SD_CSD_C_SIZE_MULT(pSd) SD_CSD(pSd, 47, 3) ///< Device size multiplier - -#define SD_CSD_MULT(pSd) (1 << (SD_CSD_C_SIZE_MULT(pSd) + 2)) - -#define SD_CSD_BLKLEN(pSd) (1 << ( SD_CSD(pSd, 80, 4) - 9 ) ) - -#define SD_CSD_BLOCKNR(pSd) ((SD_CSD_C_SIZE(pSd) + 1) * SD_CSD_MULT(pSd)) * SD_CSD_BLKLEN(pSd) - -#define SD_CSD_BLOCKNR_HC(pSd) ((SD_CSD_C_SIZE_HC(pSd) + 1) * 1024) - -#if !defined(SIMU) -#define SD_IS_HC() (Cmd_A41_resp & OCR_SD_CCS) -#define SD_GET_BLOCKNR() (SD_IS_HC() ? (SD_CSD_BLOCKNR_HC(Card_CSD)) : (SD_CSD_BLOCKNR(Card_CSD))) - -#define SD_GET_SPEED() (transSpeed) - -#define SD_GET_SIZE_MB() (SD_GET_BLOCKNR() / 2048) -#endif - -#endif //#ifndef BOARD_H - diff --git a/radio/bootloader/include/chip.h b/radio/bootloader/include/chip.h deleted file mode 100644 index 8b6984086..000000000 --- a/radio/bootloader/include/chip.h +++ /dev/null @@ -1,130 +0,0 @@ -/* ---------------------------------------------------------------------------- - * ATMEL Microcontroller Software Support - * ---------------------------------------------------------------------------- - * Copyright (c) 2008, Atmel Corporation - * - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * - Redistributions of source code must retain the above copyright notice, - * this list of conditions and the disclaimer below. - * - * Atmel's name may not be used to endorse or promote products derived from - * this software without specific prior written permission. - * - * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE - * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, - * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * ---------------------------------------------------------------------------- - */ - -//------------------------------------------------------------------------------ -/// \unit -/// !Purpose -/// -/// Definition of AT91SAM3S4 characteristics and features -/// -/// !Usage -/// -# For ARM core feature, see "AT91SAM3S4 - ARM core features". -/// -# For IP features, see "AT91SAM3S4 - IP features". -/// -# For misc, see "AT91SAM3S4 - Misc". -//------------------------------------------------------------------------------ - -#ifndef CHIP_H -#define CHIP_H - -//------------------------------------------------------------------------------ -// Headers -//------------------------------------------------------------------------------ - -//------------------------------------------------------------------------------ -// Definitions -//------------------------------------------------------------------------------ - -//------------------------------------------------------------------------------ -/// \page "AT91SAM3S4 - ARM core features" -/// This page lists several characteristics related to the ARM core -/// - -//ARM core features - -/// ARM core definition. -#define cortexm3 - -/// family definition. -#define at91sam3s - -//------------------------------------------------------------------------------ -/// \page "AT91SAM3S4 - IP features" -/// This page lists several characteristics related to the embedded IP -/// - -//IP FEATURES - -// EFC GPNVM number -#define CHIP_EFC_NUM_GPNVMS 3 - -/// Indicates chip has an Enhanced EFC. -#define CHIP_FLASH_EEFC - -// DMA channels number -#define CHIP_DMA_CHANNEL_NUM 4 - -// Indicate chip's MCI interface. -#define MCI2_INTERFACE - -// Indicate chip SSC has DMA interface. -#define CHIP_SSC_DMA - -// Indicate chip SPI has DMA interface. -#define CHIP_SPI_DMA - -/// Indicates chip has an UDP Full Speed. -#define CHIP_USB_UDP - -/// Indicates chip has an internal pull-up. -#define CHIP_USB_PULLUP_INTERNAL - -/// Number of USB endpoints -#define CHIP_USB_NUMENDPOINTS 8 - -/// Endpoints max paxcket size -#define CHIP_USB_ENDPOINTS_MAXPACKETSIZE(i) \ - ((i == 0) ? 64 : \ - ((i == 1) ? 64 : \ - ((i == 2) ? 64 : \ - ((i == 3) ? 64 : \ - ((i == 4) ? 512 : \ - ((i == 5) ? 512 : \ - ((i == 6) ? 64 : \ - ((i == 7) ? 64 : 0 )))))))) - -/// Endpoints Number of Bank -#define CHIP_USB_ENDPOINTS_BANKS(i) \ - ((i == 0) ? 1 : \ - ((i == 1) ? 2 : \ - ((i == 2) ? 2 : \ - ((i == 3) ? 1 : \ - ((i == 4) ? 2 : \ - ((i == 5) ? 2 : \ - ((i == 6) ? 2 : \ - ((i == 7) ? 2 : 0 )))))))) - -//------------------------------------------------------------------------------ -/// \page "AT91SAM3S4 - Misc " -/// This page lists misc features -/// - -//Misc - -#endif //#ifndef CHIP_H -