diff --git a/radio/src/gui/128x64/model_setup.cpp b/radio/src/gui/128x64/model_setup.cpp index 41af5720f..004737515 100644 --- a/radio/src/gui/128x64/model_setup.cpp +++ b/radio/src/gui/128x64/model_setup.cpp @@ -857,7 +857,7 @@ void menuModelSetup(event_t event) #if !defined(INTERNAL_MODULE_MULTI) case ITEM_MODEL_SETUP_INTERNAL_MODULE_TYPE: { - lcdDrawTextAlignedLeft(y, INDENT TR_MODE); + lcdDrawText(INDENT_WIDTH, y, STR_MODE); #if defined(INTERNAL_MODULE_PXX1) lcdDrawTextAtIndex(MODEL_SETUP_2ND_COLUMN, y, STR_INTERNAL_MODULE_PROTOCOLS, g_model.moduleData[INTERNAL_MODULE].type, menuHorizontalPosition==0 ? attr : 0); if (isModuleXJT(INTERNAL_MODULE)) @@ -1073,7 +1073,7 @@ void menuModelSetup(event_t event) #if defined(AFHDS3) case ITEM_MODEL_SETUP_EXTERNAL_MODULE_AFHDS_PROTOCOL: - lcdDrawTextAlignedLeft(y, TR_PROTO); + lcdDrawText(INDENT_WIDTH, y, STR_PROTOCOL); lcdDrawTextAtIndex(MODEL_SETUP_2ND_COLUMN, y, STR_AFHDS3_PROTOCOLS, g_model.moduleData[EXTERNAL_MODULE].subType, attr); if (attr && s_editMode > 0 && menuHorizontalPosition == 0) { CHECK_INCDEC_MODELVAR(event, g_model.moduleData[moduleIdx].subType, AFHDS_SUBTYPE_FIRST, AFHDS_SUBTYPE_LAST); diff --git a/radio/src/gui/480x272/model_receiver_options.cpp b/radio/src/gui/480x272/model_receiver_options.cpp index 8d69817d1..60292b223 100644 --- a/radio/src/gui/480x272/model_receiver_options.cpp +++ b/radio/src/gui/480x272/model_receiver_options.cpp @@ -47,7 +47,7 @@ enum { ITEM_RECEIVER_SETTINGS_PWM_RATE, ITEM_RECEIVER_SETTINGS_TELEMETRY, ITEM_RECEIVER_SETTINGS_TELEMETRY_25MW, - ITEM_RECEIVER_SETTINGS_FPORT, + ITEM_RECEIVER_SETTINGS_SPORT_MODE, ITEM_RECEIVER_SETTINGS_CAPABILITY_NOT_SUPPORTED1, ITEM_RECEIVER_SETTINGS_CAPABILITY_NOT_SUPPORTED2, ITEM_RECEIVER_SETTINGS_PINMAP_FIRST @@ -59,11 +59,10 @@ enum { #define CH_ENABLE_SPORT 4 #define CH_ENABLE_SBUS 5 -bool isFPort2Available(int portType) +bool isSPortModeAvailable(int mode) { uint8_t receiverId = reusableBuffer.hardwareAndSettings.receiverSettings.receiverId; - if (!IS_RECEIVER_CAPABILITY_ENABLED(RECEIVER_CAPABILITY_FPORT2) && portType == 2) - { + if (mode == 2 && !IS_RECEIVER_CAPABILITY_ENABLED(RECEIVER_CAPABILITY_FPORT2)) { return false; } return true; @@ -91,7 +90,7 @@ bool menuModelReceiverOptions(event_t event) 0, // PWM rate isModuleR9MAccess(g_moduleIdx) && receiverVariant == PXX2_VARIANT_EU && reusableBuffer.hardwareAndSettings.moduleSettings.txPower > 14 /*25mW*/ ? READONLY_ROW : (uint8_t)0, // Telemetry IF_RECEIVER_CAPABILITY(RECEIVER_CAPABILITY_TELEMETRY_25MW, 0), - IF_RECEIVER_CAPABILITY(RECEIVER_CAPABILITY_FPORT, 0) || IF_RECEIVER_CAPABILITY(RECEIVER_CAPABILITY_FPORT2, 0), + uint8_t((IS_RECEIVER_CAPABILITY_ENABLED(RECEIVER_CAPABILITY_FPORT) || IS_RECEIVER_CAPABILITY_ENABLED(RECEIVER_CAPABILITY_FPORT2)) ? 0 : HIDDEN_ROW), uint8_t(reusableBuffer.hardwareAndSettings.modules[g_moduleIdx].receivers[receiverId].information.capabilityNotSupported ? READONLY_ROW : HIDDEN_ROW), uint8_t(reusableBuffer.hardwareAndSettings.modules[g_moduleIdx].receivers[receiverId].information.capabilityNotSupported ? READONLY_ROW : HIDDEN_ROW), 0 // channels ... @@ -179,12 +178,12 @@ bool menuModelReceiverOptions(event_t event) } break; - case ITEM_RECEIVER_SETTINGS_FPORT: + case ITEM_RECEIVER_SETTINGS_SPORT_MODE: { lcdDrawText(0, y, STR_PROTOCOL); uint8_t portType = reusableBuffer.hardwareAndSettings.receiverSettings.fport | reusableBuffer.hardwareAndSettings.receiverSettings.fport2 << 1; - lcdDrawTextAtIndex(LCD_W/2, y, STR_PORT_TYPES, portType, attr); - portType = checkIncDec(event, portType, 0, 2, EE_MODEL, isFPort2Available); + lcdDrawTextAtIndex(LCD_W/2, y, STR_SPORT_MODES, portType, attr); + portType = checkIncDec(event, portType, 0, 2, EE_MODEL, isSPortModeAvailable); if (checkIncDec_Ret) { reusableBuffer.hardwareAndSettings.receiverSettings.fport = portType & 0x01; reusableBuffer.hardwareAndSettings.receiverSettings.fport2 = (portType & 0x02) >> 1; diff --git a/radio/src/gui/common/stdlcd/model_receiver_options.cpp b/radio/src/gui/common/stdlcd/model_receiver_options.cpp index 345863331..7dc6e3354 100644 --- a/radio/src/gui/common/stdlcd/model_receiver_options.cpp +++ b/radio/src/gui/common/stdlcd/model_receiver_options.cpp @@ -47,7 +47,7 @@ enum { ITEM_RECEIVER_SETTINGS_PWM_RATE, ITEM_RECEIVER_SETTINGS_TELEMETRY, ITEM_RECEIVER_SETTINGS_TELEMETRY_25MW, - ITEM_RECEIVER_SETTINGS_FPORT, + ITEM_RECEIVER_SETTINGS_SPORT_MODE, ITEM_RECEIVER_SETTINGS_CAPABILITY_NOT_SUPPORTED1, ITEM_RECEIVER_SETTINGS_CAPABILITY_NOT_SUPPORTED2, ITEM_RECEIVER_SETTINGS_PINMAP_FIRST @@ -59,11 +59,10 @@ enum { #define CH_ENABLE_SPORT 4 #define CH_ENABLE_SBUS 5 -bool isFPort2Available(int portType) +bool isSPortModeAvailable(int mode) { uint8_t receiverId = reusableBuffer.hardwareAndSettings.receiverSettings.receiverId; - if (!IS_RECEIVER_CAPABILITY_ENABLED(RECEIVER_CAPABILITY_FPORT2) && portType == 2) - { + if (mode == 2 && !IS_RECEIVER_CAPABILITY_ENABLED(RECEIVER_CAPABILITY_FPORT2)) { return false; } return true; @@ -91,7 +90,7 @@ void menuModelReceiverOptions(event_t event) 0, // PWM rate isModuleR9MAccess(g_moduleIdx) && receiverVariant == PXX2_VARIANT_EU && reusableBuffer.hardwareAndSettings.moduleSettings.txPower > 14 /*25mW*/ ? READONLY_ROW : (uint8_t)0, // Telemetry IF_RECEIVER_CAPABILITY(RECEIVER_CAPABILITY_TELEMETRY_25MW, 0), - IF_RECEIVER_CAPABILITY(RECEIVER_CAPABILITY_FPORT, 0) || IF_RECEIVER_CAPABILITY(RECEIVER_CAPABILITY_FPORT2, 0), + uint8_t((IS_RECEIVER_CAPABILITY_ENABLED(RECEIVER_CAPABILITY_FPORT) || IS_RECEIVER_CAPABILITY_ENABLED(RECEIVER_CAPABILITY_FPORT2)) ? 0 : HIDDEN_ROW), uint8_t(reusableBuffer.hardwareAndSettings.modules[g_moduleIdx].receivers[receiverId].information.capabilityNotSupported ? READONLY_ROW : HIDDEN_ROW), uint8_t(reusableBuffer.hardwareAndSettings.modules[g_moduleIdx].receivers[receiverId].information.capabilityNotSupported ? READONLY_ROW : HIDDEN_ROW), 0 // channels ... @@ -174,12 +173,12 @@ void menuModelReceiverOptions(event_t event) } break; - case ITEM_RECEIVER_SETTINGS_FPORT: + case ITEM_RECEIVER_SETTINGS_SPORT_MODE: { lcdDrawText(0, y, STR_PROTOCOL); uint8_t portType = reusableBuffer.hardwareAndSettings.receiverSettings.fport | reusableBuffer.hardwareAndSettings.receiverSettings.fport2 << 1; - lcdDrawTextAtIndex(LCD_W/2, y, STR_PORT_TYPES, portType, attr); - portType = checkIncDec(event, portType, 0, 2, EE_MODEL, isFPort2Available); + lcdDrawTextAtIndex(LCD_W/2, y, STR_SPORT_MODES, portType, attr); + portType = checkIncDec(event, portType, 0, 2, EE_MODEL, isSPortModeAvailable); if (checkIncDec_Ret) { reusableBuffer.hardwareAndSettings.receiverSettings.fport = portType & 0x01; reusableBuffer.hardwareAndSettings.receiverSettings.fport2 = (portType & 0x02) >> 1; diff --git a/radio/src/translations.cpp b/radio/src/translations.cpp index 276332f8a..455d6490d 100644 --- a/radio/src/translations.cpp +++ b/radio/src/translations.cpp @@ -81,7 +81,7 @@ ISTR(POTTYPES); ISTR(SLIDERTYPES); ISTR(ANTENNA_MODES); ISTR(SPORT_UPDATE_POWER_MODES); -ISTR(PORT_TYPES); +ISTR(SPORT_MODES); #if defined(PCBSKY9X) && defined(REVX) ISTR(VOUTPUT_TYPE); @@ -831,4 +831,3 @@ const char STR_ABOUT_PARENTS_4[] = TR_ABOUT_PARENTS_4; const char STR_AUTH_FAILURE[] = TR_AUTH_FAILURE; const char STR_PROTOCOL[] = TR_PROTOCOL; - diff --git a/radio/src/translations.h b/radio/src/translations.h index 89923f35f..a9131d8a5 100644 --- a/radio/src/translations.h +++ b/radio/src/translations.h @@ -161,7 +161,7 @@ extern const char STR_R9M_PXX2_RF_PROTOCOLS[]; extern const char STR_DSM_PROTOCOLS[]; extern const char STR_MULTI_PROTOCOLS[]; extern const char STR_MULTI_POWER[]; -extern const char STR_PORT_TYPES[]; +extern const char STR_SPORT_MODES[]; #if defined(AFHDS3) extern const char STR_AFHDS3_ONE_TO_ONE_TELEMETRY[]; @@ -965,6 +965,7 @@ extern const char STR_ABOUT_PARENTS_3[]; extern const char STR_ABOUT_PARENTS_4[]; extern const char STR_AUTH_FAILURE[]; +extern const char STR_PROTOCOL[]; #define CHR_HOUR TR_CHR_HOUR #define CHR_INPUT TR_CHR_INPUT diff --git a/radio/src/translations/cz.h.txt b/radio/src/translations/cz.h.txt index 3ec57a040..ac4392881 100644 --- a/radio/src/translations/cz.h.txt +++ b/radio/src/translations/cz.h.txt @@ -441,7 +441,7 @@ #if defined(PCBSKY9X) && defined(REVX) #define TR_OUTPUT_TYPE INDENT "Výstup" #endif -#define TR_PROTO INDENT "Protokol" +#define TR_PROTOCOL "Protokol" #define TR_PPMFRAME INDENT "PPM modulace" #define TR_REFRESHRATE TR(INDENT "Obnovit", INDENT "Obn. frekv.") #define STR_WARN_BATTVOLTAGE TR(INDENT "Výstup VBAT: ", INDENT "Varování: výstupní hodnota VBAT: ") @@ -1221,7 +1221,6 @@ #define TR_JITTER_FILTER "ADC Filtr" #define TR_RTC_CHECK TR("Check RTC", "Check RTC voltage") #define TR_AUTH_FAILURE "Auth-failure" -#define TR_PROTOCOL "Protocol" #define ZSTR_VFR "VFR" #define ZSTR_RSSI "RSSI" diff --git a/radio/src/translations/de.h.txt b/radio/src/translations/de.h.txt index 93ebebcdd..87e879fb5 100644 --- a/radio/src/translations/de.h.txt +++ b/radio/src/translations/de.h.txt @@ -443,8 +443,8 @@ #if defined(PCBSKY9X) && defined(REVX) #define TR_OUTPUT_TYPE INDENT "Output" #endif -#define TR_PROTO TR(INDENT "Protok.", INDENT "Protokoll") - #define TR_PPMFRAME INDENT "PPM-Frame" +#define TR_PROTOCOL TR("Protok.", "Protokoll") +#define TR_PPMFRAME INDENT "PPM-Frame" #define TR_REFRESHRATE TR(INDENT "Refresh", INDENT "Refresh rate") #define STR_WARN_BATTVOLTAGE TR(INDENT "Output is VBAT: ", INDENT "Warning: output level is VBAT: ") #define TR_WARN_5VOLTS "Warning: output level is 5 volts" @@ -1227,7 +1227,6 @@ #define TR_JITTER_FILTER "ADC Filter" #define TR_RTC_CHECK TR("Check RTC", "Check RTC voltage") #define TR_AUTH_FAILURE "Auth-failure" -#define TR_PROTOCOL "Protocol" // ---------------------------------------------------------------- #define ZSTR_VFR "VFR" diff --git a/radio/src/translations/en.h.txt b/radio/src/translations/en.h.txt index b61b07c33..bfe26a48a 100644 --- a/radio/src/translations/en.h.txt +++ b/radio/src/translations/en.h.txt @@ -442,7 +442,7 @@ #if defined(PCBSKY9X) && defined(REVX) #define TR_OUTPUT_TYPE INDENT "Output" #endif -#define TR_PROTO TR(INDENT "Proto", INDENT "Protocol") +#define TR_PROTOCOL TR("Proto", "Protocol") #define TR_PPMFRAME INDENT "PPM frame" #define TR_REFRESHRATE TR(INDENT "Refresh", INDENT "Refresh rate") #define STR_WARN_BATTVOLTAGE TR(INDENT "Output is VBAT: ", INDENT "Warning: output level is VBAT: ") @@ -1225,7 +1225,6 @@ #define TR_JITTER_FILTER "ADC filter" #define TR_RTC_CHECK TR("Check RTC", "Check RTC voltage") #define TR_AUTH_FAILURE "Auth-failure" -#define TR_PROTOCOL "Protocol" #define ZSTR_VFR "VFR" #define ZSTR_RSSI "RSSI" diff --git a/radio/src/translations/es.h.txt b/radio/src/translations/es.h.txt index 4dc05fb59..d97f8a516 100644 --- a/radio/src/translations/es.h.txt +++ b/radio/src/translations/es.h.txt @@ -441,7 +441,7 @@ #if defined(PCBSKY9X) && defined(REVX) #define TR_OUTPUT_TYPE INDENT "Output" #endif -#define TR_PROTO TR(INDENT"Proto",INDENT"Protocolo") +#define TR_PROTOCOL TR("Proto", "Protocolo") #define TR_PPMFRAME INDENT "Trama PPM" #define TR_REFRESHRATE TR(INDENT "Refresco", INDENT "Velocidad refresco") #define STR_WARN_BATTVOLTAGE TR(INDENT "Salida es VBAT: ", INDENT "Aviso: señal salida es VBAT: ") @@ -1224,7 +1224,6 @@ #define TR_JITTER_FILTER "Filtro ADC" #define TR_RTC_CHECK TR("Check RTC", "Check RTC voltaje") #define TR_AUTH_FAILURE "Fallo " LCDW_128_480_LINEBREAK "autentificación" -#define TR_PROTOCOL "Protocol" #define ZSTR_VFR "VFR" #define ZSTR_RSSI "RSSI" diff --git a/radio/src/translations/fi.h.txt b/radio/src/translations/fi.h.txt index 011fc3b52..013d97c5f 100644 --- a/radio/src/translations/fi.h.txt +++ b/radio/src/translations/fi.h.txt @@ -455,7 +455,7 @@ #if defined(PCBSKY9X) && defined(REVX) #define TR_OUTPUT_TYPE INDENT "Output" #endif -#define TR_PROTO TR(INDENT "Proto", INDENT "Protocol") +#define TR_PROTOCOL TR("Proto", "Protocol") #define TR_PPMFRAME TR("PPM frame", INDENT "PPM frame") #define TR_REFRESHRATE TR(INDENT "Refresh", INDENT "Refresh rate") #define STR_WARN_BATTVOLTAGE TR(INDENT "Output is VBAT: ", INDENT "Warning: output level is VBAT: ") @@ -1233,7 +1233,6 @@ #define TR_JITTER_FILTER "ADC Filter" #define TR_RTC_CHECK TR("Check RTC", "Check RTC voltage") #define TR_AUTH_FAILURE "Auth-failure" -#define TR_PROTOCOL "Protocol" #define ZSTR_VFR "VFR" #define ZSTR_RSSI "RSSI" diff --git a/radio/src/translations/fr.h.txt b/radio/src/translations/fr.h.txt index e2e55f51a..e7045e019 100644 --- a/radio/src/translations/fr.h.txt +++ b/radio/src/translations/fr.h.txt @@ -461,8 +461,8 @@ #if defined(PCBSKY9X) && defined(REVX) #define TR_OUTPUT_TYPE INDENT "Sortie" #endif -#define TR_PROTO TR(INDENT "Proto.", INDENT "Protocole") - #define TR_PPMFRAME INDENT "Trame PPM" +#define TR_PROTOCOL TR("Proto.", "Protocole") +#define TR_PPMFRAME INDENT "Trame PPM" #define TR_REFRESHRATE INDENT "Période" #define STR_WARN_BATTVOLTAGE TR(INDENT "Signal est VBAT: ", INDENT "ATTENTION: signal est à VBAT: ") #define TR_WARN_5VOLTS "Warning: output level is 5 volts" @@ -1249,7 +1249,6 @@ #define TR_JITTER_FILTER "Filtre ADC" #define TR_RTC_CHECK TR("Vérif. RTC", "Vérif. pile RTC") #define TR_AUTH_FAILURE "Auth-failure" -#define TR_PROTOCOL "Protocol" #define ZSTR_VFR "VFR" #define ZSTR_RSSI "RSSI" diff --git a/radio/src/translations/it.h.txt b/radio/src/translations/it.h.txt index 6c402a265..99b51bf74 100644 --- a/radio/src/translations/it.h.txt +++ b/radio/src/translations/it.h.txt @@ -463,8 +463,8 @@ #if defined(PCBSKY9X) && defined(REVX) #define TR_OUTPUT_TYPE INDENT "Uscita" #endif -#define TR_PROTO TR(INDENT "Protoc.", INDENT "Protocollo") - #define TR_PPMFRAME INDENT "Frame PPM" +#define TR_PROTOCOL TR("Protoc.", "Protocollo") +#define TR_PPMFRAME INDENT "Frame PPM" #define TR_REFRESHRATE TR(INDENT "Refresh", INDENT "Refresh rate") #define STR_WARN_BATTVOLTAGE TR(INDENT "Uscita VBAT: ", INDENT "Att.: livel. uscita VBAT: ") #define TR_WARN_5VOLTS "Attenzione: il livello d'uscita è 5 Volts" @@ -1242,7 +1242,6 @@ #define TR_JITTER_FILTER "Filtro ADC" #define TR_RTC_CHECK TR("Controllo RTC", "Controllo volt. RTC") #define TR_AUTH_FAILURE "Auth-failure" -#define TR_PROTOCOL "Protocol" #define ZSTR_VFR "VFR" #define ZSTR_RSSI "RSSI" diff --git a/radio/src/translations/nl.h.txt b/radio/src/translations/nl.h.txt index a0966e1a7..31f730302 100644 --- a/radio/src/translations/nl.h.txt +++ b/radio/src/translations/nl.h.txt @@ -442,8 +442,8 @@ #if defined(PCBSKY9X) && defined(REVX) #define TR_OUTPUT_TYPE INDENT "Output" #endif -#define TR_PROTO TR(INDENT "Proto", INDENT "Protocol") - #define TR_PPMFRAME INDENT "PPM frame" +#define TR_PROTOCOL TR("Proto", "Protocol") +#define TR_PPMFRAME INDENT "PPM frame" #define TR_REFRESHRATE TR(INDENT "Refresh", INDENT "Refresh rate") #define STR_WARN_BATTVOLTAGE TR(INDENT "Output is VBAT: ", INDENT "Warning: output level is VBAT: ") #define TR_WARN_5VOLTS "Warning: output level is 5 volts" @@ -1234,7 +1234,6 @@ #define TR_JITTER_FILTER "ADC Filter" #define TR_RTC_CHECK TR("Check RTC", "Check RTC voltage") #define TR_AUTH_FAILURE "Auth-failure" -#define TR_PROTOCOL "Protocol" #define ZSTR_VFR "VFR" #define ZSTR_RSSI "RSSI" diff --git a/radio/src/translations/pl.h.txt b/radio/src/translations/pl.h.txt index ea5851e82..4991d22bb 100644 --- a/radio/src/translations/pl.h.txt +++ b/radio/src/translations/pl.h.txt @@ -462,8 +462,8 @@ #if defined(PCBSKY9X) && defined(REVX) #define TR_OUTPUT_TYPE INDENT "Wyjście" #endif -#define TR_PROTO TR(INDENT "Proto", INDENT "Protokół") - #define TR_PPMFRAME INDENT "Ramka PPM" +#define TR_PROTOCOL TR("Proto", "Protokół") +#define TR_PPMFRAME INDENT "Ramka PPM" #define TR_REFRESHRATE TR(INDENT "Refresh", INDENT "Refresh rate") #define STR_WARN_BATTVOLTAGE TR(INDENT "Output is VBAT: ", INDENT "Warning: output level is VBAT: ") #define TR_WARN_5VOLTS "Warning: output level is 5 volts" @@ -1241,7 +1241,6 @@ #define TR_JITTER_FILTER "ADC Filter" #define TR_RTC_CHECK TR("Check RTC", "Check RTC voltage") #define TR_AUTH_FAILURE "Auth-failure" -#define TR_PROTOCOL "Protocol" #define ZSTR_VFR "VFR" #define ZSTR_RSSI "RSSI" diff --git a/radio/src/translations/pt.h.txt b/radio/src/translations/pt.h.txt index db824fc31..5543649e4 100644 --- a/radio/src/translations/pt.h.txt +++ b/radio/src/translations/pt.h.txt @@ -459,7 +459,7 @@ #if defined(PCBSKY9X) && defined(REVX) #define TR_OUTPUT_TYPE INDENT "Output" #endif -#define TR_PROTO INDENT"Proto" +#define TR_PROTOCOL "Proto" #define TR_PPMFRAME "PPM frame" #define TR_REFRESHRATE TR(INDENT "Refresh", INDENT "Refresh rate") #define STR_WARN_BATTVOLTAGE TR(INDENT "Output is VBAT: ", INDENT "Warning: output level is VBAT: ") @@ -1240,8 +1240,7 @@ #define TR_MENU_INVERT "Invert" #define TR_JITTER_FILTER "ADC Filter" #define TR_RTC_CHECK TR("Check RTC", "Check RTC voltage") -#define TR_AUTH_FAILURE "Auth-failure" -#define TR_PROTOCOL "Protocol" +#define TR_AUTH_FAILURE "Auth-failure" #define ZSTR_VFR "VFR" #define ZSTR_RSSI "RSSI" diff --git a/radio/src/translations/se.h.txt b/radio/src/translations/se.h.txt index 44687c1d1..7f8000575 100644 --- a/radio/src/translations/se.h.txt +++ b/radio/src/translations/se.h.txt @@ -461,8 +461,8 @@ #if defined(PCBSKY9X) && defined(REVX) #define TR_OUTPUT_TYPE INDENT "Output" #endif -#define TR_PROTO TR(INDENT "Proto", INDENT "Protokoll") - #define TR_PPMFRAME INDENT "PPM-paket" +#define TR_PROTOCOL TR("Proto", "Protokoll") +#define TR_PPMFRAME INDENT "PPM-paket" #define TR_REFRESHRATE TR(INDENT "Refresh", INDENT "Refresh rate") #define STR_WARN_BATTVOLTAGE TR(INDENT "Output is VBAT: ", INDENT "Warning: output level is VBAT: ") #define TR_WARN_5VOLTS "Warning: output level is 5 volts" @@ -1241,7 +1241,6 @@ #define TR_JITTER_FILTER "ADC Filter" #define TR_RTC_CHECK TR("Check RTC", "Check RTC voltage") #define TR_AUTH_FAILURE "Auth-failure" -#define TR_PROTOCOL "Protocol" #define ZSTR_VFR "VFR" #define ZSTR_RSSI "RSSI" diff --git a/radio/src/translations/untranslated.h b/radio/src/translations/untranslated.h index 4039492bc..268eb2606 100644 --- a/radio/src/translations/untranslated.h +++ b/radio/src/translations/untranslated.h @@ -109,8 +109,8 @@ #define LEN_R9M_PXX2_RF_PROTOCOLS "\006" #define TR_R9M_PXX2_RF_PROTOCOLS "ACCESS""FCC\0 ""EU\0 ""Flex" -#define LEN_PORT_TYPES "\014" -#define TR_PORT_TYPES "S.PORT\0 ""F.PORT\0 ""FBUS(FPORT2)" +#define LEN_SPORT_MODES "\014" +#define TR_SPORT_MODES "S.PORT\0 ""F.PORT\0 ""FBUS(FPORT2)" #define LEN_R9M_REGION "\006" #define TR_R9M_REGION "FCC\0 ""EU\0 ""868MHz""915MHz"