diff --git a/companion/src/CMakeLists.txt b/companion/src/CMakeLists.txt index e1d586e89..7fcab060a 100644 --- a/companion/src/CMakeLists.txt +++ b/companion/src/CMakeLists.txt @@ -213,6 +213,7 @@ set(companion_MOC_HDRS radionotfound.h helpers.h wizarddialog.h + modelprinter.h ) set(companion_UIS diff --git a/companion/src/modelprinter.cpp b/companion/src/modelprinter.cpp index 1cfbdf917..4f4fc25a6 100644 --- a/companion/src/modelprinter.cpp +++ b/companion/src/modelprinter.cpp @@ -187,7 +187,7 @@ QString ModelPrinter::printTimer(const TimerData & timer) QStringList result; if (firmware->getCapability(TimersName) && timer.name[0]) result += tr("Name(%1)").arg(timer.name); - result += tr("%1:%2").arg(timer.val/60, 2, 10, QChar('0')).arg(timer.val%60, 2, 10, QChar('0')); + result += QString("%1:%2").arg(timer.val/60, 2, 10, QChar('0')).arg(timer.val%60, 2, 10, QChar('0')); result += timer.mode.toString(); if (timer.persistent) result += tr("Persistent"); @@ -353,30 +353,33 @@ QString ModelPrinter::printMixerLine(const MixData & mix, bool showMultiplex, in } str += " " + source; - str += " " + Qt::escape(tr("Weight")) + QString("(%1)").arg(getGVarString(mix.weight, true)); + str += " " + Qt::escape(tr("Weight(%1)").arg(getGVarString(mix.weight, true))); QString flightModesStr = printFlightModes(mix.flightModes); - if (!flightModesStr.isEmpty()) str += " " + Qt::escape(flightModesStr); + if (!flightModesStr.isEmpty()) + str += " " + Qt::escape(flightModesStr); - if (mix.swtch.type != SWITCH_TYPE_NONE) { - str += " " + Qt::escape(tr("Switch")) + QString("(%1)").arg(mix.swtch.toString()); - } + if (mix.swtch.type != SWITCH_TYPE_NONE) + str += " " + Qt::escape(tr("Switch(%1)").arg(mix.swtch.toString())); - if (mix.carryTrim>0) str += " " + Qt::escape(tr("NoTrim")); - else if (mix.carryTrim<0) str += " " + RawSource(SOURCE_TYPE_TRIM, (-(mix.carryTrim)-1)).toString(&model); - - if (firmware->getCapability(HasNoExpo) && mix.noExpo) str += " " + Qt::escape(tr("No DR/Expo")); - if (mix.sOffset) str += " " + Qt::escape(tr("Offset") - ) + QString("(%1)").arg(getGVarString(mix.sOffset)); - if (mix.curve.value) str += " " + Qt::escape(mix.curve.toString()); + if (mix.carryTrim > 0) + str += " " + Qt::escape(tr("NoTrim")); + else if (mix.carryTrim < 0) + str += " " + RawSource(SOURCE_TYPE_TRIM, (-(mix.carryTrim)-1)).toString(&model); + if (firmware->getCapability(HasNoExpo) && mix.noExpo) + str += " " + Qt::escape(tr("No DR/Expo")); + if (mix.sOffset) + str += " " + Qt::escape(tr("Offset(%1)").arg(getGVarString(mix.sOffset))); + if (mix.curve.value) + str += " " + Qt::escape(mix.curve.toString()); int scale = firmware->getCapability(SlowScale); if (scale == 0) scale = 1; if (mix.delayDown || mix.delayUp) - str += " " + Qt::escape(tr("Delay")) + QString("(u%1:d%2)").arg((double)mix.delayUp/scale).arg((double)mix.delayDown/scale); + str += " " + Qt::escape(tr("Delay(u%1:d%2)").arg((double)mix.delayUp/scale).arg((double)mix.delayDown/scale)); if (mix.speedDown || mix.speedUp) - str += " " + Qt::escape(tr("Slow")) + QString("(u%1:d%2)").arg((double)mix.speedUp/scale).arg((double)mix.speedDown/scale); + str += " " + Qt::escape(tr("Slow((u%1:d%2)").arg((double)mix.speedUp/scale).arg((double)mix.speedDown/scale)); if (mix.mixWarn) str += " " + Qt::escape(tr("Warn(%1)").arg(mix.mixWarn)); if (firmware->getCapability(HasMixerNames) && mix.name[0]) diff --git a/companion/src/modelprinter.h b/companion/src/modelprinter.h index b531509c7..0ab4f4698 100644 --- a/companion/src/modelprinter.h +++ b/companion/src/modelprinter.h @@ -27,6 +27,8 @@ class CurveImage class ModelPrinter: public QObject { + Q_OBJECT + public: ModelPrinter(Firmware * firmware, const GeneralSettings & generalSettings, const ModelData & model); virtual ~ModelPrinter(); diff --git a/companion/src/translations/companion_cs.ts b/companion/src/translations/companion_cs.ts index d5be97e37..2e45a2b24 100644 --- a/companion/src/translations/companion_cs.ts +++ b/companion/src/translations/companion_cs.ts @@ -1,6 +1,6 @@ - + AileronsPage @@ -4400,7 +4400,7 @@ p, li { white-space: pre-wrap; } X-Long Extra dlouhý - + hh° (N/S) mm' ss''.dd @@ -6863,7 +6863,7 @@ p, li { white-space: pre-wrap; } - + FM%1 LR%1 @@ -6889,94 +6889,114 @@ p, li { white-space: pre-wrap; } - Weight Váha - Switch Spínač - + NoTrim Žádný trim - + + Weight(%1) + Váha(%1) + + + + Switch(%1) + Spínač(%1) + + + No DR/Expo Bez DR/Expo - + + Offset(%1) + Ofset(%1) + + + + Delay(u%1:d%2) + + + + + Slow((u%1:d%2) + + + Offset - Ofset + Ofset - Delay - Zpoždění + Zpoždění - Slow - Zpomalení + Zpomalení - + Warn(%1) Varování(%1) - + Disabled in all flight modes Zakázáno ve všech letových režimech - + Flight modes(%1) Letové režimy(%1) - + Flight mode(%1) Letový režim(%1) - + Edge(%1, [%2:%3]) - + Sticky(%1, %2) - + Timer(%1, %2) - + Duration(%1s) Trvání(%1s) - + Delay(%1s) Zpoždění(%1s) - + Custom Volná-XY - + Standard Rastr-X @@ -8139,7 +8159,7 @@ p, li { white-space: pre-wrap; } SWR - + °F @@ -8373,44 +8393,44 @@ p, li { white-space: pre-wrap; } !Křivka(%1) + - Support for frsky telemetry mod Podpora frsky telemetrie tj. zobrazení telemetrických dat na displeji rádia (je potřeba upravit HW, bez této úpravy nebudou fungovat dva přepínače! a pochopitelně nebudou zobrazena žádná telem. data.) + - Support for jeti telemetry mod Podpora telemetrie JETI + - Support for receiving ardupilot data telemetrie - podpora pro příjem ardupilot dat + - Support for receiving NMEA data telemetrie - podpora pro příjem NMEA dat - + Support for telemetry easy board Podpora pro desku TelemetrEZ + - Support for MAVLINK devices Podpora pro zařízení s MAVLINK - + Rotary Encoder use in menus navigation Použít Rotary Encoder pro navigaci v menu @@ -8429,6 +8449,16 @@ FAI je soutěžní mód (www.fai.org), zablokuje vario, zobrazení telemetrie a FAI MODE vždy aktivní (nelze vypnout v menu rádia) FAI je soutěžní mód (www.fai.org), zablokuje vario, zobrazení telemetrie a funkce hlasového hlášení. + + + + + + + + Enable heli menu and cyclic mix support + Funkce pro heli, nastavení typu mechaniky + @@ -8436,43 +8466,33 @@ FAI je soutěžní mód (www.fai.org), zablokuje vario, zobrazení telemetrie a - Enable heli menu and cyclic mix support - Funkce pro heli, nastavení typu mechaniky + + + + Enable TEMPLATES menu + Přidá menu s jednoduchými +šablonami modelu - - - - - - Enable TEMPLATES menu - Přidá menu s jednoduchými -šablonami modelu - - - - - - No splash screen Bez úvodního loga Firmware nebude obsahovat žádné logo, ani podporu pro něj. Toto se hodí pokud je potřeba ušetřit místo v paměti FLASH pro jiné funkce - - - - - - - - - + + + + + + + + + No flight modes Firmware nebude obsahovat podporu Letových Režimů @@ -8491,9 +8511,8 @@ Toto se hodí pokud je potřeba ušetřit místo v paměti FLASH pro jiné funkc -miniaplikace spustitelné z SD karty - No Joystick emulation inside the FW (only Mass Storage as in the Bootloader) - Firmware bez emulace Joisticku (USB bude v režimu Mass Storage (přístup k souborům na SD kartě) stejně jako v Bootloaderu) + Firmware bez emulace Joisticku (USB bude v režimu Mass Storage (přístup k souborům na SD kartě) stejně jako v Bootloaderu) OpenTX for FrSky Taranis Plus @@ -8523,9 +8542,9 @@ FAI je soutěžní mód (www.fai.org), zablokuje vario, zobrazení telemetrie a - - - + + + Support for a third timer @@ -8540,78 +8559,78 @@ FAI je soutěžní mód (www.fai.org), zablokuje vario, zobrazení telemetrie a - + Removes D8 and LR12 FrSky protocols that are not legal for use in the EU on radios sold after Jan 1st, 2015 - + Support for PPM internal module hack - + ST7565P LCD or compatible - + ST7565R LCD or compatible - + ERC12864FSF LCD - + ST7920 LCD - + 9X board - + EEprom write progress bar Progresbar zobrazující zápis do EEPROM (tj. ukládání nastavení) - - + + No Winged Shadow How High support Bez podpory - Winged Shadow How High - - + + No vario support Bez podpory varia - - + + No GPS support Bez podpory GPS - - + + No gauges in the custom telemetry screen Bez grafických ukazatelů hodnoty na obrazovkách telemetrie - + Allow compensating for offset errors in FrSky FAS current sensors Povolit možnost kompenzace chyby ofsetu u Frsky FAS proudového senzoru, pokud je to potřeba - - + + Add support for reversing stick inputs (e.g. needed for FrSky gimbals) Přidá podporu pro revers os kniplů. To je nutné zejména pro osazení FrSky kniplů do 9X. @@ -8633,43 +8652,43 @@ To je nutné zejména pro osazení FrSky kniplů do 9X. OpenTX pro Gruvin9x desku / 9X - + Power management by soft-off circuitry - + ar9x board / 9X - + 9XR-PRO - + FrSky Taranis - + FrSky Taranis Plus - + FrSky Taranis X9E - + Confirmation before radio shutdown - - + + Adds mixers output view to the CHANNELS MONITOR screen, pressing [ENT] switches between the views @@ -8678,7 +8697,7 @@ To je nutné zejména pro osazení FrSky kniplů do 9X. OpenTX pro Sky9x desku / 9X - + Haptic module installed Podpora pro vibrační modul @@ -8710,23 +8729,23 @@ To je nutné zejména pro osazení FrSky kniplů do 9X. Odstranit Globální proměnné - - - - - - - - - + + + + + + + + + Disable curves menus Bez uživatelsky definovatelných křivek - - - - + + + + Support for radio modified with regular speaker Vylepšený zvukový výstup, funkční i s origo pípákem, @@ -8734,21 +8753,21 @@ ale doporučuje se provést instalaci reproduktoru - - - - - + + + + + Used if you have modified your radio with voice mode Hlasový výstup pro telemetrii, nutno zastavět hlasový modul - - - - - + + + + + Used if you have modified your radio with haptic mode Výstrahy pomocí vibračního motoru (je třeba osadit) @@ -8758,6 +8777,20 @@ nutno zastavět hlasový modul Channel values displayed in us Hodnoty kanálů budou zobrazeny v us (mikrosekundy) místo procent + + + + + + + + + + + In model setup menus automatically set source by moving the control + Výběr spínače v mixu atd. +se provádí jeho sepnutím + @@ -8768,77 +8801,63 @@ nutno zastavět hlasový modul - In model setup menus automatically set source by moving the control - Výběr spínače v mixu atd. -se provádí jeho sepnutím - - - - - - - - - - - In model setup menus automatically set switch by moving the control Výběr spínače v mixu atd. se provádí jeho sepnutím - - - - - - - - - + + + + + + + + + Battery graph Grafické znázornění stavu baterie - - - - + + + + Enable the throttle trace in Statistics Přidat Stopu Plynu (Throttle-trace) v panelu STATISTIKA - + M128 / 9X board - + 9XR - + 9XR with M128 chip - + Gruvin9x board / 9X - - + + Support of FrSky PXX protocol Podpora pro Frsky PXX protokol - - - - - + + + + + Support for DSM2 modules Podpora DSM2 modulů @@ -8854,15 +8873,15 @@ velikost eeprom je 4096B, ale pouze prvních 2048B je použito OpenTX pro 9X desku - - - - - - - - - + + + + + + + + + PPM center adjustment in limits Možnost nastavovat střed serva šířkou pulzu @@ -8870,133 +8889,6 @@ velikost eeprom je 4096B, ale pouze prvních 2048B je použito PPM values displayed in us Hodnoty PPM budou zobrazeny v us (mikrosekundy) - - - - - - - - - - - Symetrical Limits - Symetrické limity -Přidá možnost volby mezi --klasickými limity s označením ^ -(nastavené limity jsou rovny hodnotě -100% a 100% kde průběh od středu daného subtrimem je lineární až do limitu) --symetrickými limity s označením = -(Průběhy kanálů budou symetrické od středu daného subtrimem na obě strany, -nastavené limity tedy nemusí být rovny hodnotě -100% a 100%, ale budou pouze maximem výchylky) - - - - - - - - - - Pots use in menus navigation - Moznost zadávat hodnoty -a pohybovat se v menu -pomocí potenciometrů - - - - - SmartieParts 2.2 Backlight support - Podpora pro modul SmartieParts 2.2 -(programátor/podsvícení) -Není určeno pro starší verze Smartie Parts - - - In model setup menus automatically set switch by moving some of them - Výběr spínače v mixu atd. -se provádí jeho sepnutím - - - - - - - - - Enable resetting values by pressing up and down at the same time - Rychlé nastavení hodnoty současným stiskem dvou tlačítek. -(+) a (-) invertuje hodnotu -(+)a (UP) nastaví max. hodnotu -(-) a (DN) nastaví min. hodnotu -(UP) a (DN) vastaví výchozí hodnotu - - - - - - - - - - - - No graphical check boxes and sliders - Nahrazeni posuvníku a zatržítek (checkboxu) textem - - - - - - - - - - - - Don't use bold font for highlighting active items - Vypnout zvýraznění aktivních mixů/spínačů tučným písmem. -Pokud není tato volby vybrána, -budou právě aktivní mixy, spínače a vlastní spínače -zobrazovány tučným pismem. Neaktivní mixy/spínače budou -zobrazeny normálním písmem - - - - - - - - EEprom write Progress bar - Progresbar zobrazující zápis do EEPROM -(tj. ukládání nastavení) - - - - - - - - - Imperial units - Imerialní jednotky pro telemetrii -(stopy, palce, míle atd.) - - - - MEGA2560 board - - - - - Sky9x board / 9X - - - - - - - Bluetooth interface - - @@ -9007,6 +8899,133 @@ zobrazeny normálním písmem + Symetrical Limits + Symetrické limity +Přidá možnost volby mezi +-klasickými limity s označením ^ +(nastavené limity jsou rovny hodnotě -100% a 100% kde průběh od středu daného subtrimem je lineární až do limitu) +-symetrickými limity s označením = +(Průběhy kanálů budou symetrické od středu daného subtrimem na obě strany, +nastavené limity tedy nemusí být rovny hodnotě -100% a 100%, ale budou pouze maximem výchylky) + + + + + + + + + + Pots use in menus navigation + Moznost zadávat hodnoty +a pohybovat se v menu +pomocí potenciometrů + + + + + SmartieParts 2.2 Backlight support + Podpora pro modul SmartieParts 2.2 +(programátor/podsvícení) +Není určeno pro starší verze Smartie Parts + + + In model setup menus automatically set switch by moving some of them + Výběr spínače v mixu atd. +se provádí jeho sepnutím + + + + + + + + + Enable resetting values by pressing up and down at the same time + Rychlé nastavení hodnoty současným stiskem dvou tlačítek. +(+) a (-) invertuje hodnotu +(+)a (UP) nastaví max. hodnotu +(-) a (DN) nastaví min. hodnotu +(UP) a (DN) vastaví výchozí hodnotu + + + + + + + + + + + + No graphical check boxes and sliders + Nahrazeni posuvníku a zatržítek (checkboxu) textem + + + + + + + + + + + + Don't use bold font for highlighting active items + Vypnout zvýraznění aktivních mixů/spínačů tučným písmem. +Pokud není tato volby vybrána, +budou právě aktivní mixy, spínače a vlastní spínače +zobrazovány tučným pismem. Neaktivní mixy/spínače budou +zobrazeny normálním písmem + + + + + + + + EEprom write Progress bar + Progresbar zobrazující zápis do EEPROM +(tj. ukládání nastavení) + + + + + + + + + Imperial units + Imerialní jednotky pro telemetrii +(stopy, palce, míle atd.) + + + + MEGA2560 board + + + + + Sky9x board / 9X + + + + + + + Bluetooth interface + + + + + + + + + + + + Global variables Aktivuje Globální Proměnné Jsou to proměnné, které lze použít pro konfiguraci místo některých pevných číselných hodnot. @@ -9015,20 +9034,20 @@ Jejich hodnoty naleznete u originální 9x desky v seznamu křivek. U ostatních Nastavení hodnoty se provádí přímo v seznamu proměnných, nebo pomocí Funkce - - + + Support for SD memory card Podpora paměťové karty SD - + Support for DSM2 modules using ppm instead of true serial Podpora DSM2 modulů s použitím PPM místo sériového protokolu - - - + + + Enable HELI menu and cyclic mix support Funkce pro heli, nastavení typu mechaniky @@ -9191,13 +9210,13 @@ Nastavení hodnoty se provádí přímo v seznamu proměnných, nebo pomocí Fun m - + °C - + ° @@ -10247,6 +10266,14 @@ Nastavení hodnoty se provádí přímo v seznamu proměnných, nebo pomocí Fun Switch Spínač + + Weight(%1) + Váha(%1) + + + Switch(%1) + Spínač(%1) + NoTrim Žádný trim @@ -10255,6 +10282,14 @@ Nastavení hodnoty se provádí přímo v seznamu proměnných, nebo pomocí Fun No DR/Expo Bez DR/Expo + + Offset(%1) + Ofset(%1) + + + Warn(%1) + Varování(%1) + Delay Zpoždění @@ -11452,7 +11487,7 @@ Funkce trimu bude opačná, stejně tak i varování polohy páky plynu. Meters (m or ft) Vzdálenost (m nebo ft) - + Temp (°) Teplota (°) @@ -11787,12 +11822,12 @@ Funkce trimu bude opačná, stejně tak i varování polohy páky plynu. ft - + °C - + °F @@ -11822,7 +11857,7 @@ Funkce trimu bude opačná, stejně tak i varování polohy páky plynu. g - + ° @@ -11886,11 +11921,11 @@ Funkce trimu bude opačná, stejně tak i varování polohy páky plynu. Feet (ft) Vzdálenost (ft) - + Temp (°C) Teplota (°C) - + Temp (°F) Teplota (°F) @@ -11919,7 +11954,7 @@ Funkce trimu bude opačná, stejně tak i varování polohy páky plynu. Acceleration (g) Zrychlení (g) - + Heading (°) Směr (°) diff --git a/companion/src/translations/companion_de.ts b/companion/src/translations/companion_de.ts index 5784ac06b..a1979567e 100644 --- a/companion/src/translations/companion_de.ts +++ b/companion/src/translations/companion_de.ts @@ -1,6 +1,6 @@ - + AileronsPage @@ -3419,7 +3419,7 @@ Mode 4: SpeakerVoice Sprecher Stimme - + hh° (N/S) mm' ss''.dd GMS hh° (N/S) mm' ss''.dd @@ -4754,7 +4754,7 @@ Warnung stummer Betrieb - Wird angezeigt, wenn der Piepser komplett ausgeschalte X-Long X-lang - + hh° (N/S) mm' ss''.dd GMS hh° (N/S) mm' ss''.dd @@ -7228,7 +7228,7 @@ Anzahl Sekunden fest, welche der Mischer für einen Durchgang von -100 bis +100 - + FM%1 FM%1 @@ -7254,94 +7254,114 @@ Anzahl Sekunden fest, welche der Mischer für einen Durchgang von -100 bis +100 - Weight Gewichtung - Switch Schalter - + NoTrim - + + Weight(%1) + Gewichtung(%1) + + + + Switch(%1) + Schalter(%1) + + + No DR/Expo Kein DR/Expo - - Offset - Offset + + Offset(%1) + Offset(%1) - - Delay - Verzögerung + + Delay(u%1:d%2) + - - Slow - Langsam + + Slow((u%1:d%2) + - + Warn(%1) - + Offset + Offset + + + Delay + Verzögerung + + + Slow + Langsam + + + Disabled in all flight modes - + Flight modes(%1) Flugphasen(%1) - + Flight mode(%1) Flugphase(%1) - + Edge(%1, [%2:%3]) Puls(%1, [%2:%3]) - + Sticky(%1, %2) SRFF(%1, %2) - + Timer(%1, %2) Takt(%1, %2) - + Duration(%1s) - + Delay(%1s) - + Custom - + Standard @@ -9135,10 +9155,22 @@ Anzahl Sekunden fest, welche der Mischer für einen Durchgang von -100 bis +100 Switch Schalter + + Weight(%1) + Gewichtung(%1) + + + Switch(%1) + Schalter(%1) + No DR/Expo Kein DR/Expo + + Offset(%1) + Offset(%1) + Offset Offset @@ -9751,7 +9783,7 @@ Anzahl Sekunden fest, welche der Mischer für einen Durchgang von -100 bis +100 Rud Sei - + °F @@ -9833,13 +9865,13 @@ Anzahl Sekunden fest, welche der Mischer für einen Durchgang von -100 bis +100 m m - + °C °C - + ° @@ -10156,42 +10188,42 @@ Anzahl Sekunden fest, welche der Mischer für einen Durchgang von -100 bis +100 X%1 + - Support for frsky telemetry mod Ünterstützt Frsky Telemetry Mod + - Support for jeti telemetry mod Ünterstützt Jeti Telemetry Mod + - Support for receiving ardupilot data + - Support for receiving NMEA data - + Support for telemetry easy board + - Support for MAVLINK devices - + Rotary Encoder use in menus navigation nutze den Drehgeber für Menü Navigation @@ -10199,6 +10231,16 @@ Anzahl Sekunden fest, welche der Mischer für einen Durchgang von -100 bis +100 FAI MODE always enabled FAI Mode immer freigegeben + + + + + + + + Enable heli menu and cyclic mix support + Freigabe Helimenü und zykl. Mischer + @@ -10206,49 +10248,48 @@ Anzahl Sekunden fest, welche der Mischer für einen Durchgang von -100 bis +100 - Enable heli menu and cyclic mix support - Freigabe Helimenü und zykl. Mischer + + + + Enable TEMPLATES menu + Freigabe Tamplaptes Menü - - - - - - Enable TEMPLATES menu - Freigabe Tamplaptes Menü - - - - - - No splash screen Kein Startbild + + + + + + + + + + + Disable curves menus + Kein Kurvenmenü + - - - - - - Disable curves menus - Kein Kurvenmenü + Support for radio modified with regular speaker + - Support for radio modified with regular speaker + + Used if you have modified your radio with voice mode @@ -10256,16 +10297,7 @@ Anzahl Sekunden fest, welche der Mischer für einen Durchgang von -100 bis +100 - - Used if you have modified your radio with voice mode - - - - - - - - + Used if you have modified your radio with haptic mode @@ -10274,6 +10306,19 @@ Anzahl Sekunden fest, welche der Mischer für einen Durchgang von -100 bis +100 Channel values displayed in us Kanalwerte Anzeige in us statt % + + + + + + + + + + + In model setup menus automatically set source by moving the control + + @@ -10284,19 +10329,6 @@ Anzahl Sekunden fest, welche der Mischer für einen Durchgang von -100 bis +100 - In model setup menus automatically set source by moving the control - - - - - - - - - - - - In model setup menus automatically set switch by moving the control @@ -10322,9 +10354,9 @@ Anzahl Sekunden fest, welche der Mischer für einen Durchgang von -100 bis +100 - - - + + + Support for a third timer @@ -10339,126 +10371,126 @@ Anzahl Sekunden fest, welche der Mischer für einen Durchgang von -100 bis +100 - + Removes D8 and LR12 FrSky protocols that are not legal for use in the EU on radios sold after Jan 1st, 2015 - + Support for PPM internal module hack - + ST7565P LCD or compatible - + ST7565R LCD or compatible - + ERC12864FSF LCD - + ST7920 LCD - + 9X board - - - - + + + + Enable the throttle trace in Statistics - + EEprom write progress bar EEprom Schreib-Balken - - + + No Winged Shadow How High support - - + + No vario support Kein Vario - - + + No GPS support Kein GPS - - + + No gauges in the custom telemetry screen - + Allow compensating for offset errors in FrSky FAS current sensors - - + + Add support for reversing stick inputs (e.g. needed for FrSky gimbals) - + Power management by soft-off circuitry - + ar9x board / 9X - + 9XR-PRO - + FrSky Taranis - + FrSky Taranis Plus - + FrSky Taranis X9E - + Confirmation before radio shutdown - - + + Adds mixers output view to the CHANNELS MONITOR screen, pressing [ENT] switches between the views @@ -10471,7 +10503,7 @@ Anzahl Sekunden fest, welche der Mischer für einen Durchgang von -100 bis +100 OpenTX für FrSky Taranis - + Haptic module installed Haptikmodul installiert @@ -10480,11 +10512,6 @@ Anzahl Sekunden fest, welche der Mischer für einen Durchgang von -100 bis +100 Support for Lua model scripts Lua Model-Spriptsprache unterstützen - - - No Joystick emulation inside the FW (only Mass Storage as in the Bootloader) - - OpenTX for FrSky Taranis Plus OpenTX für FrSky Taranis Plus @@ -10498,8 +10525,8 @@ Anzahl Sekunden fest, welche der Mischer für einen Durchgang von -100 bis +100 OpenTX für FrSky Taranis Revision 4A - - + + Support of FrSky PXX protocol Unterstützung von FrSky PXX Protokol @@ -10526,24 +10553,24 @@ Anzahl Sekunden fest, welche der Mischer für einen Durchgang von -100 bis +100 Keine Globale Variablen - - - - - + + + + + Support for DSM2 modules Ünterstützung für DSM2-Module - - - - - - - - - + + + + + + + + + PPM center adjustment in limits PPM Mitten-Einstellung bei Servo Limits @@ -10552,26 +10579,26 @@ Anzahl Sekunden fest, welche der Mischer für einen Durchgang von -100 bis +100 PPM Wert in us angezeigt statt in % - - - - - - - - - + + + + + + + + + Symetrical Limits Symmetrische Grenzen - - - - - - - + + + + + + + Pots use in menus navigation Potis als Menü Navigation benutzen @@ -10585,32 +10612,45 @@ Anzahl Sekunden fest, welche der Mischer für einen Durchgang von -100 bis +100 OpenTx für das 9X Board - - - - - - - - - + + + + + + + + + No flight modes Keine Flugphasen - - + + SmartieParts 2.2 Backlight support + + + + + + + + Enable resetting values by pressing up and down at the same time + + + + - Enable resetting values by pressing up and down at the same time + + No graphical check boxes and sliders @@ -10623,8 +10663,8 @@ Anzahl Sekunden fest, welche der Mischer für einen Durchgang von -100 bis +100 - No graphical check boxes and sliders - + Battery graph + Akku Ladezustand @@ -10636,19 +10676,6 @@ Anzahl Sekunden fest, welche der Mischer für einen Durchgang von -100 bis +100 - Battery graph - Akku Ladezustand - - - - - - - - - - - Don't use bold font for highlighting active items @@ -10657,71 +10684,71 @@ Anzahl Sekunden fest, welche der Mischer für einen Durchgang von -100 bis +100 OpenTX für M128 / 9X Board + + + + + + EEprom write Progress bar + EEprom Schreib-Balken + + + - EEprom write Progress bar - EEprom Schreib-Balken - - - - - - - - Imperial units Zöllige Einheiten - + M128 / 9X board - + 9XR 9XR - + 9XR with M128 chip - + Gruvin9x board / 9X - + MEGA2560 board - + Sky9x board / 9X - - - + + + Bluetooth interface Bluetooth Schnittstelle - - - - - - - - - + + + + + + + + + Global variables Globale Variablen @@ -10744,20 +10771,20 @@ Anzahl Sekunden fest, welche der Mischer für einen Durchgang von -100 bis +100 OpenTX für Gruvin9x Board / 9X - - + + Support for SD memory card Unterstützung für SD-Speicherkarte - + Support for DSM2 modules using ppm instead of true serial Unterstüzung für DSM2 Modul mit PPM-Signal anstatt echtem seriellem Signal - - - + + + Enable HELI menu and cyclic mix support Freigabe von Heli-Menüs und zyklischer Mischer Unterstützung @@ -12036,7 +12063,7 @@ umgedreht und ist dann vorne Meters (m or ft) Meter (m or ft) - + Temp (°) Temp(°) @@ -12383,12 +12410,12 @@ umgedreht und ist dann vorne ft ft - + °C °C - + °F @@ -12418,7 +12445,7 @@ umgedreht und ist dann vorne g g - + ° ° @@ -12482,11 +12509,11 @@ umgedreht und ist dann vorne Feet (ft) Fuss (ft) - + Temp (°C) Temp (°C) - + Temp (°F) Temp (°F) @@ -12515,7 +12542,7 @@ umgedreht und ist dann vorne Acceleration (g) Beschleunigung (g) - + Heading (°) Temp (°) diff --git a/companion/src/translations/companion_es.ts b/companion/src/translations/companion_es.ts index a74520b0d..f8e7f7542 100755 --- a/companion/src/translations/companion_es.ts +++ b/companion/src/translations/companion_es.ts @@ -1,6 +1,6 @@ - + AileronsPage @@ -4150,7 +4150,7 @@ p, li { white-space: pre-wrap; } X-Long X-Largo - + hh° (N/S) mm' ss''.dd @@ -6475,7 +6475,7 @@ p, li { white-space: pre-wrap; } - + FM%1 @@ -6501,94 +6501,114 @@ p, li { white-space: pre-wrap; } - Weight - Switch - + NoTrim - + + Weight(%1) + + + + + Switch(%1) + Switch(%1) + + + No DR/Expo - - Offset - Offset + + Offset(%1) + - - Delay - Retardo + + Delay(u%1:d%2) + - - Slow - Lento + + Slow((u%1:d%2) + - + Warn(%1) - + Offset + Offset + + + Delay + Retardo + + + Slow + Lento + + + Disabled in all flight modes - + Flight modes(%1) Modos de vuelo(%1) - + Flight mode(%1) Modo de vuelo(%1) - + Edge(%1, [%2:%3]) - + Sticky(%1, %2) - + Timer(%1, %2) Temporizador (%1, %2) - + Duration(%1s) - + Delay(%1s) - + Custom A medida - + Standard Estandar @@ -8759,13 +8779,13 @@ p, li { white-space: pre-wrap; } m - + °C - + ° @@ -8803,7 +8823,7 @@ p, li { white-space: pre-wrap; } A - + °F @@ -9180,42 +9200,42 @@ p, li { white-space: pre-wrap; } + - Support for frsky telemetry mod Mod de soporte para telemetría frsky + - Support for jeti telemetry mod Mod de soporte para tele,etría jeti + - Support for receiving ardupilot data Soporte para recepción de datos ardupilot + - Support for receiving NMEA data Soporte para recepción de datos NMEA - + Support for telemetry easy board Soporte para para placa sencilla de telemetría + - Support for MAVLINK devices Soporte para dispositivos MAVLINK - + Rotary Encoder use in menus navigation Uso de codificador rotativo en los menús de navegación @@ -9227,6 +9247,16 @@ p, li { white-space: pre-wrap; } FAI MODE always enabled MODO FAI siempre activado + + + + + + + + Enable heli menu and cyclic mix support + Activar menú Heli y el soporte de mezcla de cíclico + @@ -9234,66 +9264,56 @@ p, li { white-space: pre-wrap; } - Enable heli menu and cyclic mix support - Activar menú Heli y el soporte de mezcla de cíclico + + + + Enable TEMPLATES menu + Activar menú PLANTILLAS - - - - - - Enable TEMPLATES menu - Activar menú PLANTILLAS - - - - - - No splash screen Sin pantalla de inicio + + + + + + + + + + + Disable curves menus + Desctivar el menú curvas + - - - - - - Disable curves menus - Desctivar el menú curvas + Support for radio modified with regular speaker + Soporte para radio modificada con altavoz normal - Support for radio modified with regular speaker - Soporte para radio modificada con altavoz normal + + Used if you have modified your radio with voice mode + Usado si tienes modificada tu radio con modo voz - - Used if you have modified your radio with voice mode - Usado si tienes modificada tu radio con modo voz - - - - - - - + Used if you have modified your radio with haptic mode Usado si tienes tu radio modificada con el modo haptic @@ -9302,6 +9322,19 @@ p, li { white-space: pre-wrap; } Channel values displayed in us Visualizar los valores de canal en us + + + + + + + + + + + In model setup menus automatically set source by moving the control + En el menú de ajuste de modelo se selecciona automáticamente el origen del control moviendolo + @@ -9312,19 +9345,6 @@ p, li { white-space: pre-wrap; } - In model setup menus automatically set source by moving the control - En el menú de ajuste de modelo se selecciona automáticamente el origen del control moviendolo - - - - - - - - - - - In model setup menus automatically set switch by moving the control En el menú de ajuste de modelo se selecciona automáticamente el switch de control moviendolo @@ -9350,9 +9370,9 @@ p, li { white-space: pre-wrap; } - - - + + + Support for a third timer @@ -9367,126 +9387,126 @@ p, li { white-space: pre-wrap; } - + Removes D8 and LR12 FrSky protocols that are not legal for use in the EU on radios sold after Jan 1st, 2015 - + Support for PPM internal module hack - + ST7565P LCD or compatible - + ST7565R LCD or compatible - + ERC12864FSF LCD - + ST7920 LCD - + 9X board - - - - + + + + Enable the throttle trace in Statistics Activar el recorrido del acelerador en las Estadísticas - + EEprom write progress bar Barra de progreso de escritura EEPROM - - + + No Winged Shadow How High support - - + + No vario support No hay soporte de variómetro - - + + No GPS support No hay soporte para GPS - - + + No gauges in the custom telemetry screen No hay indicadores en la pantalla de telemetría personalizada - + Allow compensating for offset errors in FrSky FAS current sensors Permitir la compensación de los errores de offset en los sensores FrSky FAS actuales - - + + Add support for reversing stick inputs (e.g. needed for FrSky gimbals) Añadir soporte para invertir las entradas de sticks (ejem. neseraio para los gimbals FrSky) - + Power management by soft-off circuitry - + ar9x board / 9X - + 9XR-PRO - + FrSky Taranis - + FrSky Taranis Plus - + FrSky Taranis X9E - + Confirmation before radio shutdown - - + + Adds mixers output view to the CHANNELS MONITOR screen, pressing [ENT] switches between the views @@ -9499,7 +9519,7 @@ p, li { white-space: pre-wrap; } OpenTX para FrSky Taranis - + Haptic module installed Módulo Haptic instalado @@ -9508,18 +9528,13 @@ p, li { white-space: pre-wrap; } Support for Lua model scripts Soporte para los modelos de scripts Lua - - - No Joystick emulation inside the FW (only Mass Storage as in the Bootloader) - - OpenTX for FrSky Taranis Plus OpenTX para FrSky Taranis Plus - - + + Support of FrSky PXX protocol Soporte para protocolo FrSky PXX @@ -9538,48 +9553,48 @@ p, li { white-space: pre-wrap; } Desactivar las variables Globales - - - - - + + + + + Support for DSM2 modules Soporte para los módulos DSM2 - - - - - - - - - + + + + + + + + + PPM center adjustment in limits Ajuste del centro PPM en los limites - - - - - - - - - + + + + + + + + + Symetrical Limits Límites simétricos - - - - - - - + + + + + + + Pots use in menus navigation Usar potenciómetros en los menús de navegación @@ -9600,33 +9615,46 @@ el tamaño del eeprom es 4096 pero solo los primeros 2048 están usadosOpenTX para placa 9X - - - - - - - - - + + + + + + + + + No flight modes Sin modos de vuelo - - + + SmartieParts 2.2 Backlight support Soporte de retroiluminación para SmartieParts 2.2 + + + + + + + + Enable resetting values by pressing up and down at the same time + Activar el reseteo de valores presionando up y down al mismo tiempo + + + - Enable resetting values by pressing up and down at the same time - Activar el reseteo de valores presionando up y down al mismo tiempo + + No graphical check boxes and sliders + Sin casillas de verificación ni sliders gráficos @@ -9638,8 +9666,8 @@ el tamaño del eeprom es 4096 pero solo los primeros 2048 están usados - No graphical check boxes and sliders - Sin casillas de verificación ni sliders gráficos + Battery graph + Gráfico batería @@ -9651,19 +9679,6 @@ el tamaño del eeprom es 4096 pero solo los primeros 2048 están usados - Battery graph - Gráfico batería - - - - - - - - - - - Don't use bold font for highlighting active items No usar la fuente negrita para destacar elementos activos @@ -9672,71 +9687,71 @@ el tamaño del eeprom es 4096 pero solo los primeros 2048 están usadosOpenTX para placa M128 / 9X + + + + + + EEprom write Progress bar + Barra de progreso de escriture de EEprom + + + - EEprom write Progress bar - Barra de progreso de escriture de EEprom - - - - - - - - Imperial units Unidades Imperiales - + M128 / 9X board - + 9XR - + 9XR with M128 chip - + Gruvin9x board / 9X - + MEGA2560 board - + Sky9x board / 9X - - - + + + Bluetooth interface Interfaz Bluetooth - - - - - - - - - + + + + + + + + + Global variables Variables globales @@ -9753,20 +9768,20 @@ el tamaño del eeprom es 4096 pero solo los primeros 2048 están usadosOpenTX para placas Gruvin9x / 9x - - + + Support for SD memory card Soporte para tarjetas de memoria SD - + Support for DSM2 modules using ppm instead of true serial Soporte para módulos DSM2 que usan PPM en lugar de true serial - - - + + + Enable HELI menu and cyclic mix support Activar menú HELI y el soporte de mezcla de cíclico @@ -9986,6 +10001,10 @@ El equipo OpenTX. Which radio type do you want to simulate? + + Switch(%1) + Switch(%1) + RadioNotFoundDialog @@ -10781,7 +10800,7 @@ Si está marcado el acelerador será invertido. El ralentí será delante, el t Meters (m or ft) Metros (m o pies) - + Temp (°) Temp (°) @@ -11116,12 +11135,12 @@ Si está marcado el acelerador será invertido. El ralentí será delante, el t ft - + °C - + °F @@ -11151,7 +11170,7 @@ Si está marcado el acelerador será invertido. El ralentí será delante, el t g - + ° diff --git a/companion/src/translations/companion_fi.ts b/companion/src/translations/companion_fi.ts index 74154cd26..8903f0c93 100644 --- a/companion/src/translations/companion_fi.ts +++ b/companion/src/translations/companion_fi.ts @@ -1,6 +1,6 @@ - + AileronsPage @@ -3524,7 +3524,7 @@ p, li { white-space: pre-wrap; } GPS Coordinates GPS koordinaatit - + hh° (N/S) mm' ss''.dd hh° (N/S) mm' ss''.dd @@ -5063,7 +5063,7 @@ p, li { white-space: pre-wrap; } X-Long X-Pitkä - + hh° (N/S) mm' ss''.dd hh° (N/S) mm' ss''.dd @@ -7938,7 +7938,7 @@ Jos tyhjä mikserin katsotaan olevan "ON" kokoajan. - + FM%1 FM%1 @@ -7964,94 +7964,114 @@ Jos tyhjä mikserin katsotaan olevan "ON" kokoajan. - Weight Paino - Switch Kytkin - + NoTrim Ei trimmiä - + + Weight(%1) + Paino(%1) + + + + Switch(%1) + Kytkin(%1) + + + No DR/Expo Ei DR / Expoja - - Offset - Tasoitus + + Offset(%1) + Tasoitus(%1) - - Delay - Viive + + Delay(u%1:d%2) + - - Slow - Hidas + + Slow((u%1:d%2) + - + Warn(%1) - + Offset + Tasoitus + + + Delay + Viive + + + Slow + Hidas + + + Disabled in all flight modes - + Flight modes(%1) Lentotilat(%1) - + Flight mode(%1) Lentotila(%1) - + Edge(%1, [%2:%3]) reuna(%1, [%2:%3]) - + Sticky(%1, %2) Jähmeä(%1, %2) - + Timer(%1, %2) Ajastin(%1, %2) - + Duration(%1s) - + Delay(%1s) - + Custom Omat - + Standard Vakio @@ -10195,7 +10215,7 @@ Jos tyhjä mikserin katsotaan olevan "ON" kokoajan. ON ON - + °F @@ -10436,13 +10456,13 @@ Jos tyhjä mikserin katsotaan olevan "ON" kokoajan. m metri - + °C °C - + ° @@ -10592,6 +10612,14 @@ Jos tyhjä mikserin katsotaan olevan "ON" kokoajan. Switch Kytkin + + Weight(%1) + Paino(%1) + + + Switch(%1) + Kytkin(%1) + NoTrim Ei trimmiä @@ -10600,6 +10628,10 @@ Jos tyhjä mikserin katsotaan olevan "ON" kokoajan. No DR/Expo Ei DR / Expoja + + Offset(%1) + Tasoitus(%1) + Offset Tasoitus @@ -10854,53 +10886,53 @@ eepromin koko on 4096, mutta vain ensimmäiset 2048 on käytössä EEPROM tallennettiin seuraavin varoituksin: + - Support for frsky telemetry mod Tuki FrSky telemetria moduulille - + Support for telemetry easy board Tuki telemetrialle ( easy board ) + - Support for jeti telemetry mod Tuki Jeti telemetria moduulille + - Support for receiving ardupilot data Tuki vastaanottaa ardupilot dataa + - Support for receiving NMEA data Tuki vastaanottaa NMEA dataa + - Support for MAVLINK devices Tuki MAVLINK laitteille - + Rotary Encoder use in menus navigation Rotary encoder käyttö valikon navigoinnissa - - - - - - - + + + + + + + Pots use in menus navigation Potikoiden käyttö valikko navigoinnissa @@ -10921,6 +10953,16 @@ eepromin koko on 4096, mutta vain ensimmäiset 2048 on käytössä OpenTX for 9X board OpenTX 9X radioille + + + + + + + + Enable heli menu and cyclic mix support + HELI valikko päälle ,cyclic mix tuella + @@ -10928,29 +10970,32 @@ eepromin koko on 4096, mutta vain ensimmäiset 2048 on käytössä - Enable heli menu and cyclic mix support - HELI valikko päälle ,cyclic mix tuella + + + + Enable TEMPLATES menu + Mallit valikko käyttöön - - - - - - Enable TEMPLATES menu - Mallit valikko käyttöön + No splash screen + Ei alkuruutua - No splash screen - Ei alkuruutua + + + + + + No flight modes + Ei lentotiloja @@ -10962,56 +11007,60 @@ eepromin koko on 4096, mutta vain ensimmäiset 2048 on käytössä - No flight modes - Ei lentotiloja + Disable curves menus + Käyrät valikko pois - - - - - - Disable curves menus - Käyrät valikko pois + Support for radio modified with regular speaker + Tuki radioille johon viritetty normaali kaiutin - Support for radio modified with regular speaker - Tuki radioille johon viritetty normaali kaiutin + + Used if you have modified your radio with voice mode + Käytetään jos radioon on viritetty ääni moduuli - - Used if you have modified your radio with voice mode - Käytetään jos radioon on viritetty ääni moduuli - - - - - - - + Used if you have modified your radio with haptic mode Käytetään jos radioon on viritetty värinä moduuli - + + + + + + Support for DSM2 modules + Tuki DSM2 moduleille + + - Support for DSM2 modules - Tuki DSM2 moduleille + + + + + + PPM center adjustment in limits + PPM keskitys arvojen mukaan + + + PPM values displayed in us + PPM arvot näytetään" us" tyyppisesti @@ -11023,12 +11072,8 @@ eepromin koko on 4096, mutta vain ensimmäiset 2048 on käytössä - PPM center adjustment in limits - PPM keskitys arvojen mukaan - - - PPM values displayed in us - PPM arvot näytetään" us" tyyppisesti + Global variables + Globaalit muuttujat @@ -11040,25 +11085,12 @@ eepromin koko on 4096, mutta vain ensimmäiset 2048 on käytössä - Global variables - Globaalit muuttujat - - - - - - - - - - - Symetrical Limits Symmetriset rajat - - + + SmartieParts 2.2 Backlight support "Smartie parts 2.2" taustavalo tuki @@ -11075,6 +11107,19 @@ eepromin koko on 4096, mutta vain ensimmäiset 2048 on käytössä Channel values displayed in us Kavanien arvot näytetään us mallissa + + + + + + + + + + + In model setup menus automatically set source by moving the control + Mallien asetukset asetetaan automaattisesti kun ohjaimia käänellään + @@ -11085,31 +11130,31 @@ eepromin koko on 4096, mutta vain ensimmäiset 2048 on käytössä - In model setup menus automatically set source by moving the control - Mallien asetukset asetetaan automaattisesti kun ohjaimia käänellään - - - - - - - - - - - In model setup menus automatically set switch by moving the control Mallien asetukset asetetaan automaattisesti kun nappeja käänellään + + + + + + + + Enable resetting values by pressing up and down at the same time + Asetuksien poisto: Paina ylös ja alas samanaikaisesti + + + - Enable resetting values by pressing up and down at the same time - Asetuksien poisto: Paina ylös ja alas samanaikaisesti + + No graphical check boxes and sliders + Ei graaffisia valintalaatikoita ja liukuja @@ -11121,8 +11166,8 @@ eepromin koko on 4096, mutta vain ensimmäiset 2048 on käytössä - No graphical check boxes and sliders - Ei graaffisia valintalaatikoita ja liukuja + Battery graph + Akun grafiikka @@ -11134,19 +11179,6 @@ eepromin koko on 4096, mutta vain ensimmäiset 2048 on käytössä - Battery graph - Akun grafiikka - - - - - - - - - - - Don't use bold font for highlighting active items Älä käytä lihavointua fonttia korostamaan aktiivisia asioita @@ -11172,9 +11204,9 @@ eepromin koko on 4096, mutta vain ensimmäiset 2048 on käytössä - - - + + + Support for a third timer @@ -11189,140 +11221,140 @@ eepromin koko on 4096, mutta vain ensimmäiset 2048 on käytössä - + Removes D8 and LR12 FrSky protocols that are not legal for use in the EU on radios sold after Jan 1st, 2015 - + Support for PPM internal module hack - + ST7565P LCD or compatible - + ST7565R LCD or compatible - + ERC12864FSF LCD - + ST7920 LCD - + 9X board - - - - + + + + Enable the throttle trace in Statistics Salli kaasun seuranta statistiikassa - + EEprom write progress bar EEprom tallennus palkki - - - - - - + + + + + + Imperial units Imperiaali yksiköt - - + + No Winged Shadow How High support erikoistoiminto korkea (ei tuettu) - - + + No vario support Ei vario tukea - - + + No GPS support Ei GPS tukea - - + + No gauges in the custom telemetry screen Ei mittareita "omassa" telemetria ruudussa - + Allow compensating for offset errors in FrSky FAS current sensors Salli virheiden kompensoiti FrSkyn FAS virta sensorille - - + + Add support for reversing stick inputs (e.g. needed for FrSky gimbals) Lisää tuki käänteisille tikkujen tuloille ( esim taraniksen gimbaalit) - + M128 / 9X board - + 9XR 9XR - + 9XR with M128 chip - + Gruvin9x board / 9X - + MEGA2560 board - + Sky9x board / 9X - + ar9x board / 9X - + FrSky Taranis Plus - + FrSky Taranis X9E @@ -11331,11 +11363,11 @@ eepromin koko on 4096, mutta vain ensimmäiset 2048 on käytössä OpenTX M128 / 9X radiolle - - - - - + + + + + EEprom write Progress bar EEprom tallennus palkki @@ -11352,35 +11384,35 @@ eepromin koko on 4096, mutta vain ensimmäiset 2048 on käytössä OpenTX -> Gruvin9x / 9X - - + + Support for SD memory card Tuki SD Muistikortille - - + + Support of FrSky PXX protocol Tuli FrSky PXX protokollalle - + Confirmation before radio shutdown - + Support for DSM2 modules using ppm instead of true serial Tuki DSM2 moduuleille käyttäen PPM, eikä oikeaa sarjaliikennettä - + Power management by soft-off circuitry - - + + Adds mixers output view to the CHANNELS MONITOR screen, pressing [ENT] switches between the views @@ -11389,24 +11421,24 @@ eepromin koko on 4096, mutta vain ensimmäiset 2048 on käytössä OpenTX -> Sky9x / 9X - - - + + + Enable HELI menu and cyclic mix support HELI valikko päälle ,cyclic mix tuella - + 9XR-PRO - + FrSky Taranis - + Haptic module installed Värinä moduli asennettu @@ -11415,11 +11447,6 @@ eepromin koko on 4096, mutta vain ensimmäiset 2048 on käytössä Support for Lua model scripts Tuki LUA mallien skripteille - - - No Joystick emulation inside the FW (only Mass Storage as in the Bootloader) - - OpenTX for FrSky Taranis Plus OpenTX FrSky Taranis Plus @@ -11429,9 +11456,9 @@ eepromin koko on 4096, mutta vain ensimmäiset 2048 on käytössä Käytä FrSky Taranis tikkuja 9X / 9XR - - - + + + Bluetooth interface Bluetooth liintäntä @@ -12949,7 +12976,7 @@ Jos tämä valittuna, kaasu toimii käänteisesti. Tyhjäkäynti on ylhäällä, Meters (m or ft) Metrit (m tai jalkaa ) - + Temp (°) Lämpöt (c) @@ -13292,12 +13319,12 @@ Jos tämä valittuna, kaasu toimii käänteisesti. Tyhjäkäynti on ylhäällä, ft jalka - + °C °C - + °F @@ -13327,7 +13354,7 @@ Jos tämä valittuna, kaasu toimii käänteisesti. Tyhjäkäynti on ylhäällä, g g - + ° ° diff --git a/companion/src/translations/companion_fr.ts b/companion/src/translations/companion_fr.ts index 8a4869841..f8d80567e 100644 --- a/companion/src/translations/companion_fr.ts +++ b/companion/src/translations/companion_fr.ts @@ -1,6 +1,6 @@ - + AileronsPage @@ -4442,7 +4442,7 @@ p, li { white-space: pre-wrap; } X-Long X-long - + hh° (N/S) mm' ss''.dd @@ -6853,7 +6853,7 @@ p, li { white-space: pre-wrap; } - + FM%1 PV%1 @@ -6879,94 +6879,114 @@ p, li { white-space: pre-wrap; } - Weight Ratio - Switch Inter - + NoTrim Pas de trim - + + Weight(%1) + Ratio(%1) + + + + Switch(%1) + Inter(%1) + + + No DR/Expo Pas d'expo/DR - + + Offset(%1) + Décalage(%1) + + + + Delay(u%1:d%2) + Délai(h%1:b%2) + + + + Slow((u%1:d%2) + Ralenti(h%1:b%2) + + Offset - Décalage + Décalage - Delay - Délai + Délai - Slow - Ralenti + Ralenti - + Warn(%1) Alerte(%1) - + Disabled in all flight modes Désactivé pour toutes les phases de vol - + Flight modes(%1) Phases de vol(%1) - + Flight mode(%1) Phase de vol(%1) - + Edge(%1, [%2:%3]) Flanc(%1, [%2:%3]) - + Sticky(%1, %2) Bistable(%1, %2) - + Timer(%1, %2) - + Duration(%1s) Durée(%1s) - + Delay(%1s) Délai(%1s) - + Custom Prédéfini - + Standard @@ -8771,13 +8791,37 @@ p, li { white-space: pre-wrap; } Switch Interrupteur + + Weight(%1) + Ratio(%1) + + + Switch(%1) + Inter(%1) + NoTrim - Pas de trim + Pas de trim No DR/Expo - Pas d'expo/DR + Pas d'expo/DR + + + Offset(%1) + Décalage(%1) + + + Delay(u%1:d%2) + Délai(h%1:b%2) + + + Slow((u%1:d%2) + Ralenti(h%1:b%2) + + + Warn(%1) + Alerte(%1) Offset @@ -9193,13 +9237,13 @@ p, li { white-space: pre-wrap; } m - + °C - + ° @@ -9237,7 +9281,7 @@ p, li { white-space: pre-wrap; } A - + °F @@ -9736,42 +9780,42 @@ p, li { white-space: pre-wrap; } + - Support for frsky telemetry mod Support de la télémétrie FrSky + - Support for jeti telemetry mod Support de la télémétrie JETI + - Support for receiving ardupilot data Support de la télémétrie ARDUPILOT + - Support for receiving NMEA data Support de la télémétrie NMEA - + Support for telemetry easy board Support de la carte TelemetrEZ + - Support for MAVLINK devices Support du protocole MAVLINK - + Rotary Encoder use in menus navigation Utiliser un encodeur rotatif pour la navigation @@ -9783,6 +9827,16 @@ p, li { white-space: pre-wrap; } FAI MODE always enabled Mode FAI toujours actif + + + + + + + + Enable heli menu and cyclic mix support + Activer le menu hélico et les mixages CCPM + @@ -9790,66 +9844,56 @@ p, li { white-space: pre-wrap; } - Enable heli menu and cyclic mix support - Activer le menu hélico et les mixages CCPM + + + + Enable TEMPLATES menu + Inclure les gabarits - - - - - - Enable TEMPLATES menu - Inclure les gabarits - - - - - - No splash screen Pas d'écran de démarrage + + + + + + + + + + + Disable curves menus + Désactiver le menu des courbes + - - - - - - Disable curves menus - Désactiver le menu des courbes + Support for radio modified with regular speaker + Haut-parleur au lieu du buzzer d'origine - Support for radio modified with regular speaker - Haut-parleur au lieu du buzzer d'origine + + Used if you have modified your radio with voice mode + Support du module vocal - - Used if you have modified your radio with voice mode - Support du module vocal - - - - - - - + Used if you have modified your radio with haptic mode Support du vibreur @@ -9859,15 +9903,15 @@ p, li { white-space: pre-wrap; } Positions de voies affichées en us - - - - - - - - - + + + + + + + + + Battery graph Graphique de batterie @@ -9893,9 +9937,9 @@ p, li { white-space: pre-wrap; } - - - + + + Support for a third timer Support d'un 3e chrono @@ -9910,85 +9954,85 @@ p, li { white-space: pre-wrap; } Le port USB est utilisé pour un port série avec interface par ligne de commande au lieu du joystick - + Removes D8 and LR12 FrSky protocols that are not legal for use in the EU on radios sold after Jan 1st, 2015 Supprime les protocoles RF D8 et LR12 qui ne sont plus utilisable légalementen Europe sur les radios vendues après le 1er janvier 2015 - + Support for PPM internal module hack Support du remplacement du module interne par un module PPM - + ST7565P LCD or compatible ST7565P LCD ou compatible - + ST7565R LCD or compatible ST7565R LCD ou compatible - + ERC12864FSF LCD LCD ERC12864FSF - + ST7920 LCD LCD ST7920 - + 9X board FlySky /Turnigy 9x - - - - + + + + Enable the throttle trace in Statistics Activer l'historique du manche des gaz dans les statistiques - + EEprom write progress bar Barre de progression pour l'écriture de l'EEPROM - - + + No Winged Shadow How High support Supprimer le support du variomètre Winged Shadow How High - - + + No vario support Supprimer la fonction variomètre audio - - + + No GPS support Supprimer le support du GPS - - + + No gauges in the custom telemetry screen Supprimer l'affichage des valeurs de télémesure par barres - + Allow compensating for offset errors in FrSky FAS current sensors Permettre la compensation d'un décalage des capteurs de courant FASxx FrSky - - + + Add support for reversing stick inputs (e.g. needed for FrSky gimbals) Ajoute le support de l'inversion des manches (nécessaire pour l'utilisation de manches FrSky) @@ -9997,43 +10041,43 @@ p, li { white-space: pre-wrap; } OpenTX pour carte MEGA2560 - + Power management by soft-off circuitry Gestion alim. par software - + ar9x board / 9X 9x avec carte AR9X - + 9XR-PRO - + FrSky Taranis - + FrSky Taranis Plus - + FrSky Taranis X9E - + Confirmation before radio shutdown Confirmation à l'arrêt - - + + Adds mixers output view to the CHANNELS MONITOR screen, pressing [ENT] switches between the views Ajoute une vue de la sortie des mixeurs au moniteur de canaux, ENT pour passer d'une vue à l'autre @@ -10050,7 +10094,7 @@ p, li { white-space: pre-wrap; } Valuers affichées en us - + Haptic module installed Module vibreur installé @@ -10060,9 +10104,8 @@ p, li { white-space: pre-wrap; } Support des scripts Lua - No Joystick emulation inside the FW (only Mass Storage as in the Bootloader) - Pas d'émulation de joystick dans le firmware (accès mémoire uniquement) + Pas d'émulation de joystick dans le firmware (accès mémoire uniquement) Removes D8 and LR12 FrSky protocols that are not legal for use anymore on radios sold after Jan 1st, 2015 @@ -10077,8 +10120,8 @@ p, li { white-space: pre-wrap; } OpenTX pour FrSky Taranis Rev4a - - + + Support of FrSky PXX protocol Support du protocole PXX FrSky @@ -10106,48 +10149,48 @@ p, li { white-space: pre-wrap; } Supprimer le support des variables globales - - - - - + + + + + Support for DSM2 modules Support du protocole DSM2 - - - - - - - - - + + + + + + + + + PPM center adjustment in limits Neutres PPM ajustables - - - - - - - - - + + + + + + + + + Symetrical Limits Limites symétriques - - - - - - - + + + + + + + Pots use in menus navigation Support de la navigation dans les menus avec les POTS @@ -10168,57 +10211,57 @@ La taille de l'EEPROM est de 4096, mais seulement les 2048 premiers sont ut OpenTX pour 9X - - - - - - - - - + + + + + + + + + No flight modes Pas de phases de vol - - + + SmartieParts 2.2 Backlight support Support du rétroéclairage pour la carte SmartieParts 2.2 - - - - - - + + + + + + Enable resetting values by pressing up and down at the same time Permet la remise à zéro des valeurs en pressant haut-bas en même temps, valeur min avec gauche/bas, valeur max avec haut/droite, inversion avec gauche/droite - - - - - - - - - + + + + + + + + + No graphical check boxes and sliders Pas de cases à cocher et de curseurs graphiques - - - - - - - - - + + + + + + + + + Don't use bold font for highlighting active items Ne pas mettre les lignes actives en gras @@ -10227,74 +10270,87 @@ La taille de l'EEPROM est de 4096, mais seulement les 2048 premiers sont ut OpenTX pour 9X avec m128 + + + + + + EEprom write Progress bar + Barre de progression affichée lors des écritures EEPROM + + + - EEprom write Progress bar - Barre de progression affichée lors des écritures EEPROM - - - - - - - - Imperial units Unités Impériales - + M128 / 9X board 9x avec M128 - + 9XR - + 9XR with M128 chip 9XR avec M128 - + Gruvin9x board / 9X 9x avec carte Gruvin9x - + MEGA2560 board Carte M2560 perso - + Sky9x board / 9X 9x avec carte Sky9X - - - + + + Bluetooth interface Interface Bluetooth - - - - - - - - - + + + + + + + + + Global variables Variables globales + + + + + + + + + + + In model setup menus automatically set source by moving the control + Sélectionner les sources des mixeurs en bougeant le contrôle désiré + @@ -10305,19 +10361,6 @@ La taille de l'EEPROM est de 4096, mais seulement les 2048 premiers sont ut - In model setup menus automatically set source by moving the control - Sélectionner les sources des mixeurs en bougeant le contrôle désiré - - - - - - - - - - - In model setup menus automatically set switch by moving the control Sélectionner les interrupteurs en bougeant le contrôle désiré @@ -10334,13 +10377,13 @@ La taille de l'EEPROM est de 4096, mais seulement les 2048 premiers sont ut OpenTX pour carte Gruvin9x - - + + Support for SD memory card Support de la carte SD - + Support for DSM2 modules using ppm instead of true serial Support pour les modules DSM2 par le signal PPM @@ -10349,9 +10392,9 @@ La taille de l'EEPROM est de 4096, mais seulement les 2048 premiers sont ut OpenTX pour carte Sky9x - - - + + + Enable HELI menu and cyclic mix support Activer le menu hélico et les mixages CCPM @@ -11467,7 +11510,7 @@ Si cette option est cochée, la voie des gaz est inversée: le ralenti est &apo Meters (m or ft) Distance (m ou ft) - + Temp (°) Température (°) @@ -11806,12 +11849,12 @@ Si cette option est cochée, la voie des gaz est inversée: le ralenti est &apo ft - + °C - + °F @@ -11841,7 +11884,7 @@ Si cette option est cochée, la voie des gaz est inversée: le ralenti est &apo g - + ° @@ -11905,11 +11948,11 @@ Si cette option est cochée, la voie des gaz est inversée: le ralenti est &apo Feet (ft) Distance (ft) - + Temp (°C) Température (°C) - + Temp (°F) Température (°F) @@ -11938,7 +11981,7 @@ Si cette option est cochée, la voie des gaz est inversée: le ralenti est &apo Acceleration (g) Accélération (g) - + Heading (°) Cap (°) diff --git a/companion/src/translations/companion_he.ts b/companion/src/translations/companion_he.ts index 9eb9bb20a..8cf8d670b 100644 --- a/companion/src/translations/companion_he.ts +++ b/companion/src/translations/companion_he.ts @@ -1,6 +1,6 @@ - + AileronsPage @@ -3249,7 +3249,7 @@ p, li { white-space: pre-wrap; } X-Long - + hh° (N/S) mm' ss''.dd @@ -5302,7 +5302,7 @@ This determines how mixer values are added. - + FM%1 @@ -5328,94 +5328,102 @@ This determines how mixer values are added. - Weight - Switch - + NoTrim - + + Weight(%1) + + + + + Switch(%1) + + + + No DR/Expo - - Offset + + Offset(%1) - - Delay + + Delay(u%1:d%2) - - Slow + + Slow((u%1:d%2) - + Warn(%1) - + Disabled in all flight modes - + Flight modes(%1) - + Flight mode(%1) - + Edge(%1, [%2:%3]) - + Sticky(%1, %2) - + Timer(%1, %2) - + Duration(%1s) - + Delay(%1s) - + Custom - + Standard @@ -7218,13 +7226,13 @@ This determines how mixer values are added. m - + °C - + ° @@ -7262,7 +7270,7 @@ This determines how mixer values are added. A - + °F @@ -7639,45 +7647,55 @@ This determines how mixer values are added. + - Support for frsky telemetry mod + - Support for jeti telemetry mod + - Support for receiving ardupilot data + - Support for receiving NMEA data - + Support for telemetry easy board + - Support for MAVLINK devices - + Rotary Encoder use in menus navigation + + + + + + + + Enable heli menu and cyclic mix support + + @@ -7685,7 +7703,10 @@ This determines how mixer values are added. - Enable heli menu and cyclic mix support + + + + Enable TEMPLATES menu @@ -7693,20 +7714,20 @@ This determines how mixer values are added. - - - - - - Enable TEMPLATES menu + No splash screen - - - - - No splash screen + + + + + + + + + + Disable curves menus @@ -7714,12 +7735,7 @@ This determines how mixer values are added. - - - - - - Disable curves menus + Support for radio modified with regular speaker @@ -7727,7 +7743,8 @@ This determines how mixer values are added. - Support for radio modified with regular speaker + + Used if you have modified your radio with voice mode @@ -7735,16 +7752,7 @@ This determines how mixer values are added. - - Used if you have modified your radio with voice mode - - - - - - - - + Used if you have modified your radio with haptic mode @@ -7753,6 +7761,19 @@ This determines how mixer values are added. Channel values displayed in us + + + + + + + + + + + In model setup menus automatically set source by moving the control + + @@ -7763,19 +7784,6 @@ This determines how mixer values are added. - In model setup menus automatically set source by moving the control - - - - - - - - - - - - In model setup menus automatically set switch by moving the control @@ -7801,9 +7809,9 @@ This determines how mixer values are added. - - - + + + Support for a third timer @@ -7818,131 +7826,131 @@ This determines how mixer values are added. - + Removes D8 and LR12 FrSky protocols that are not legal for use in the EU on radios sold after Jan 1st, 2015 - + Support for PPM internal module hack - + ST7565P LCD or compatible - + ST7565R LCD or compatible - + ERC12864FSF LCD - + ST7920 LCD - + 9X board - - - - + + + + Enable the throttle trace in Statistics - + EEprom write progress bar + + + + No Winged Shadow How High support + + - No Winged Shadow How High support + No vario support - No vario support + No GPS support - No GPS support - - - - - No gauges in the custom telemetry screen - + Allow compensating for offset errors in FrSky FAS current sensors - - + + Add support for reversing stick inputs (e.g. needed for FrSky gimbals) - + Power management by soft-off circuitry - + ar9x board / 9X - + 9XR-PRO - + FrSky Taranis - + FrSky Taranis Plus - + FrSky Taranis X9E - + Confirmation before radio shutdown - - + + Adds mixers output view to the CHANNELS MONITOR screen, pressing [ENT] switches between the views - + Haptic module installed @@ -7952,13 +7960,8 @@ This determines how mixer values are added. - - No Joystick emulation inside the FW (only Mass Storage as in the Bootloader) - - - - - + + Support of FrSky PXX protocol @@ -7973,48 +7976,48 @@ This determines how mixer values are added. - - - - - + + + + + Support for DSM2 modules - - - - - - - - - + + + + + + + + + PPM center adjustment in limits - - - - - - - - - + + + + + + + + + Symetrical Limits - - - - - - - + + + + + + + Pots use in menus navigation @@ -8030,32 +8033,45 @@ This determines how mixer values are added. - - - - - - - - - + + + + + + + + + No flight modes - - + + SmartieParts 2.2 Backlight support + + + + + + + + Enable resetting values by pressing up and down at the same time + + + + - Enable resetting values by pressing up and down at the same time + + No graphical check boxes and sliders @@ -8068,7 +8084,7 @@ This determines how mixer values are added. - No graphical check boxes and sliders + Battery graph @@ -8081,106 +8097,93 @@ This determines how mixer values are added. - Battery graph - - - - - - - - - - - - Don't use bold font for highlighting active items + + + + + + EEprom write Progress bar + + + + - EEprom write Progress bar - - - - - - - - - Imperial units - + M128 / 9X board - + 9XR - + 9XR with M128 chip - + Gruvin9x board / 9X - + MEGA2560 board - + Sky9x board / 9X - - - + + + Bluetooth interface - - - - - - - - - + + + + + + + + + Global variables - - + + Support for SD memory card - + Support for DSM2 modules using ppm instead of true serial - - - + + + Enable HELI menu and cyclic mix support @@ -9173,7 +9176,7 @@ If this is checked the throttle will be reversed. Idle will be forward, trim wi Meters (m or ft) - + Temp (°) @@ -9496,12 +9499,12 @@ If this is checked the throttle will be reversed. Idle will be forward, trim wi ft - + °C - + °F @@ -9531,7 +9534,7 @@ If this is checked the throttle will be reversed. Idle will be forward, trim wi g - + ° diff --git a/companion/src/translations/companion_it.ts b/companion/src/translations/companion_it.ts index b9c21f21c..62218dbad 100644 --- a/companion/src/translations/companion_it.ts +++ b/companion/src/translations/companion_it.ts @@ -1,6 +1,6 @@ - + AileronsPage @@ -3754,7 +3754,7 @@ p, li { white-space: pre-wrap; } X-Long Extra Lungo - + hh° (N/S) mm' ss''.dd hh° (N/S) mm' ss" .dd @@ -5900,7 +5900,7 @@ Determina come il valore viene aggiunto alla miscelazione. - + FM%1 FV %1 @@ -5926,94 +5926,114 @@ Determina come il valore viene aggiunto alla miscelazione. - Weight Peso - Switch - + NoTrim NoTrim - + + Weight(%1) + Peso(%1) + + + + Switch(%1) + Interruttore(%1) + + + No DR/Expo No DR/Espo - - Offset - Spostamento + + Offset(%1) + Spostamento(%1) - - Delay - Ritardo + + Delay(u%1:d%2) + - - Slow - Rallentamento + + Slow((u%1:d%2) + - + Warn(%1) - + Offset + Spostamento + + + Delay + Ritardo + + + Slow + Rallentamento + + + Disabled in all flight modes - + Flight modes(%1) Fasi di volo(%1) - + Flight mode(%1) Fase di volo(%1) - + Edge(%1, [%2:%3]) Soglia(%1, [%2:%3]) - + Sticky(%1, %2) Bloccato(%1, %2) - + Timer(%1, %2) Temporizzatore(%1, %2) - + Duration(%1s) - + Delay(%1s) - + Custom Personalizzato - + Standard Standard @@ -7122,7 +7142,7 @@ Determina come il valore viene aggiunto alla miscelazione. Haptic Vibrazione - + °F @@ -7814,6 +7834,14 @@ Determina come il valore viene aggiunto alla miscelazione. Weight Peso + + Weight(%1) + Peso(%1) + + + Switch(%1) + Interruttore(%1) + NoTrim NoTrim @@ -7822,6 +7850,10 @@ Determina come il valore viene aggiunto alla miscelazione. No DR/Expo No DR/Espo + + Offset(%1) + Spostamento(%1) + Offset Spostamento @@ -8342,42 +8374,42 @@ Determina come il valore viene aggiunto alla miscelazione. OpenTX non consente questo numero di canali + - Support for frsky telemetry mod Supporto per la modifica per la telemetria FrSky + - Support for jeti telemetry mod Supporto per la modifica per la telemetria Jeti + - Support for receiving ardupilot data Supporto per la modifica per la ricezione dati ardupilot + - Support for receiving NMEA data Supporto per la modifica per la ricezione dati NMEA - + Support for telemetry easy board Supporto per la scheda Telemetrez + - Support for MAVLINK devices Supporto per dispositivi MAVLINK - + Rotary Encoder use in menus navigation Utilizzo dell'encoder rotativo nella navigazione dei menù @@ -8386,6 +8418,16 @@ Determina come il valore viene aggiunto alla miscelazione. (displaying only first 10 warnings) (elenco dei primi 10 avvisi) + + + + + + + + Enable heli menu and cyclic mix support + Abilita supporto menù elicotteri e miscelazione ciclico + @@ -8393,29 +8435,32 @@ Determina come il valore viene aggiunto alla miscelazione. - Enable heli menu and cyclic mix support - Abilita supporto menù elicotteri e miscelazione ciclico + + + + Enable TEMPLATES menu + Abilita menù dei MODELLI - - - - - - Enable TEMPLATES menu - Abilita menù dei MODELLI + No splash screen + Disabilita schermata di avvio - No splash screen - Disabilita schermata di avvio + + + + + + No flight modes + Disabilita supporto fasi di volo @@ -8427,45 +8472,32 @@ Determina come il valore viene aggiunto alla miscelazione. - No flight modes - Disabilita supporto fasi di volo + Disable curves menus + Disabilita il menu delle curve - - - - - - Disable curves menus - Disabilita il menu delle curve + Support for radio modified with regular speaker + Supporto per modifica con altoparlante - Support for radio modified with regular speaker - Supporto per modifica con altoparlante + + Used if you have modified your radio with voice mode + Utilizzato per la gestione del modulo audio - - Used if you have modified your radio with voice mode - Utilizzato per la gestione del modulo audio - - - - - - - + Used if you have modified your radio with haptic mode Abilita supporto vibrazione @@ -8475,38 +8507,38 @@ Determina come il valore viene aggiunto alla miscelazione. Posizione canali visualizzata in us - - + + Add support for reversing stick inputs (e.g. needed for FrSky gimbals) Aggiungi il supporto per l'inversione degli stick (Ad es. necessario per l'utilizzo degli stick FrSky) - + M128 / 9X board - + 9XR - + 9XR with M128 chip - + Gruvin9x board / 9X - + MEGA2560 board - + Power management by soft-off circuitry Gestione dell'alimentazione mediante pulsante soft-off @@ -8515,7 +8547,7 @@ Determina come il valore viene aggiunto alla miscelazione. OpenTX per 9XR-PRO - + Haptic module installed Modulo vibrazione installato @@ -8525,9 +8557,8 @@ Determina come il valore viene aggiunto alla miscelazione. Supporto degli script LUA - No Joystick emulation inside the FW (only Mass Storage as in the Bootloader) - Nessuna emulazione joystick nel FW (solo memoria di massa come nel Bootloader) + Nessuna emulazione joystick nel FW (solo memoria di massa come nel Bootloader) Removes D8 and LR12 FrSky protocols that are not legal for use anymore on radios sold after Jan 1st, 2015 @@ -8538,15 +8569,15 @@ Determina come il valore viene aggiunto alla miscelazione. OpenTx per FrSky Taranis Plus - - - - - - - - - + + + + + + + + + Battery graph Grafico della batteria @@ -8572,9 +8603,9 @@ Determina come il valore viene aggiunto alla miscelazione. - - - + + + Support for a third timer @@ -8589,99 +8620,99 @@ Determina come il valore viene aggiunto alla miscelazione. - + Removes D8 and LR12 FrSky protocols that are not legal for use in the EU on radios sold after Jan 1st, 2015 - + Support for PPM internal module hack - + ST7565P LCD or compatible Display LCD ST7565R o compatibile - + ERC12864FSF LCD - + ST7920 LCD - + 9X board - - - - + + + + Enable the throttle trace in Statistics Abilita il grafico utilizzo motore nelle statistiche - + EEprom write progress bar Barra di avanzamento durante la scrittura della eeprom - - + + No Winged Shadow How High support Disabilita supporto Winged Shadow How High - - + + No vario support Nessun Variometro - - + + No GPS support Disabilita supporto GPS - - + + No gauges in the custom telemetry screen Disabilita schermate telemetriche a barre - + Allow compensating for offset errors in FrSky FAS current sensors Abilita compensazione per errore offset in sensore di corrente FAS FrSky - + ar9x board / 9X - + 9XR-PRO - + FrSky Taranis - + FrSky Taranis Plus - + FrSky Taranis X9E @@ -8690,12 +8721,12 @@ Determina come il valore viene aggiunto alla miscelazione. OpenTX per scheda MEGA2560 - + Confirmation before radio shutdown - + ST7565R LCD or compatible Display LCD ST7565R o compatibile @@ -8704,8 +8735,8 @@ Determina come il valore viene aggiunto alla miscelazione. Utilizzato se il modulo audio è disponibile - - + + Adds mixers output view to the CHANNELS MONITOR screen, pressing [ENT] switches between the views Aggiungi la vista delle uscite dei mixer alla schermata Monitor Canali, premendo [ENT] si intervallano le viste @@ -8718,8 +8749,8 @@ Determina come il valore viene aggiunto alla miscelazione. OpenTx per FrSky Taranis X9E - - + + Support of FrSky PXX protocol Supporto del protocollo PXX FrSky @@ -8734,48 +8765,48 @@ Determina come il valore viene aggiunto alla miscelazione. Disabilita variabili globali - - - - - + + + + + Support for DSM2 modules Supporto per moduli DSM2 - - - - - - - - - + + + + + + + + + PPM center adjustment in limits Regolazione del centro PPM nel menù limiti - - - - - - - - - + + + + + + + + + Symetrical Limits Limiti Simmetrici - - - - - - - + + + + + + + Pots use in menus navigation Utilizzo dei potenziometri per la navigazione nei menù @@ -8791,44 +8822,44 @@ la eeprom è 4096 bytes ma solo 2048 vengono utilizzati OpenTX for scheda 9X - - + + SmartieParts 2.2 Backlight support Abilita il supporto per la scheda SmartiePart versione 2.2 - - - - - - + + + + + + Enable resetting values by pressing up and down at the same time Abilita l'azzeramento di un valore mediante pressione contemporanea di tasti - - - - - - - - - + + + + + + + + + No graphical check boxes and sliders Disabilita grafica per caselle di spunta e cursori - - - - - - - - - + + + + + + + + + Don't use bold font for highlighting active items Non utilizzare font in grassetto per evidenziare le voci attive @@ -8837,49 +8868,62 @@ la eeprom è 4096 bytes ma solo 2048 vengono utilizzati OpenTx per Board M128 / 9X + + + + + + EEprom write Progress bar + Barra di avanzamento durante la scrittura della eeprom + + + - EEprom write Progress bar - Barra di avanzamento durante la scrittura della eeprom - - - - - - - - Imperial units Unità Imperiali nella telemetria - + Sky9x board / 9X - - - + + + Bluetooth interface Interfaccia bluetooth - - - - - - - - - + + + + + + + + + Global variables Variabili Globali + + + + + + + + + + + In model setup menus automatically set source by moving the control + Nel menu settaggio modelli selezionare automaticamente la sorgente muovendo il controllo + @@ -8890,19 +8934,6 @@ la eeprom è 4096 bytes ma solo 2048 vengono utilizzati - In model setup menus automatically set source by moving the control - Nel menu settaggio modelli selezionare automaticamente la sorgente muovendo il controllo - - - - - - - - - - - In model setup menus automatically set switch by moving the control Nel menu settaggio modelli selezionare automaticamente l'interruttore muovendo il controllo @@ -8919,13 +8950,13 @@ la eeprom è 4096 bytes ma solo 2048 vengono utilizzati OpenTX per board Gruvin 9x / 9x - - + + Support for SD memory card Supporto memorie SD - + Support for DSM2 modules using ppm instead of true serial Supporto per moduli DSM2 usando il ppm invece della seriale @@ -8934,9 +8965,9 @@ la eeprom è 4096 bytes ma solo 2048 vengono utilizzati OpenTX per scheda Sky9x / 9X - - - + + + Enable HELI menu and cyclic mix support Abilita il menù HELI e le funzioni del piatto ciclico @@ -8998,13 +9029,13 @@ la eeprom è 4096 bytes ma solo 2048 vengono utilizzati m - + °C - + ° @@ -10358,7 +10389,7 @@ Se l'opzione selezionata lo stick motore verrà rovesciato. Il minimo sarà Meters (m or ft) Metri (m o ft) - + Temp (°) Temperatura (°) @@ -10689,12 +10720,12 @@ Se l'opzione selezionata lo stick motore verrà rovesciato. Il minimo sarà ft - + °C - + °F @@ -10724,7 +10755,7 @@ Se l'opzione selezionata lo stick motore verrà rovesciato. Il minimo sarà g - + ° @@ -10813,7 +10844,7 @@ Se l'opzione selezionata lo stick motore verrà rovesciato. Il minimo sarà Acceleration (g) Accelerazione (g) - + Heading (°) Rotta (°) diff --git a/companion/src/translations/companion_nl.ts b/companion/src/translations/companion_nl.ts index 110172d86..9d138beb6 100644 --- a/companion/src/translations/companion_nl.ts +++ b/companion/src/translations/companion_nl.ts @@ -1,6 +1,6 @@ - + AileronsPage @@ -3249,7 +3249,7 @@ p, li { white-space: pre-wrap; } X-Long - + hh° (N/S) mm' ss''.dd @@ -5300,7 +5300,7 @@ If blank then the mix is considered to be "ON" all the time. - + FM%1 @@ -5326,94 +5326,102 @@ If blank then the mix is considered to be "ON" all the time. - Weight - Switch - + NoTrim - + + Weight(%1) + + + + + Switch(%1) + + + + No DR/Expo - - Offset + + Offset(%1) - - Delay + + Delay(u%1:d%2) - - Slow + + Slow((u%1:d%2) - + Warn(%1) - + Disabled in all flight modes - + Flight modes(%1) - + Flight mode(%1) - + Edge(%1, [%2:%3]) - + Sticky(%1, %2) - + Timer(%1, %2) - + Duration(%1s) - + Delay(%1s) - + Custom - + Standard @@ -6175,7 +6183,7 @@ If blank then the mix is considered to be "ON" all the time. LS - + °F @@ -6508,13 +6516,13 @@ If blank then the mix is considered to be "ON" all the time. m - + °C - + ° @@ -7469,53 +7477,53 @@ If blank then the mix is considered to be "ON" all the time. + - Support for frsky telemetry mod - + Support for telemetry easy board + - Support for jeti telemetry mod + - Support for receiving ardupilot data + - Support for receiving NMEA data + - Support for MAVLINK devices - + Rotary Encoder use in menus navigation - - - - - - - + + + + + + + Pots use in menus navigation @@ -7524,6 +7532,16 @@ If blank then the mix is considered to be "ON" all the time. No OverrideCH functions available + + + + + + + + Enable heli menu and cyclic mix support + + @@ -7531,7 +7549,10 @@ If blank then the mix is considered to be "ON" all the time. - Enable heli menu and cyclic mix support + + + + Enable TEMPLATES menu @@ -7539,12 +7560,7 @@ If blank then the mix is considered to be "ON" all the time. - - - - - - Enable TEMPLATES menu + No splash screen @@ -7552,7 +7568,12 @@ If blank then the mix is considered to be "ON" all the time. - No splash screen + + + + + + No flight modes @@ -7565,7 +7586,7 @@ If blank then the mix is considered to be "ON" all the time. - No flight modes + Disable curves menus @@ -7573,12 +7594,7 @@ If blank then the mix is considered to be "ON" all the time. - - - - - - Disable curves menus + Support for radio modified with regular speaker @@ -7586,7 +7602,8 @@ If blank then the mix is considered to be "ON" all the time. - Support for radio modified with regular speaker + + Used if you have modified your radio with voice mode @@ -7594,26 +7611,35 @@ If blank then the mix is considered to be "ON" all the time. - - Used if you have modified your radio with voice mode - - - - - - - - + Used if you have modified your radio with haptic mode - + + + + + + Support for DSM2 modules + + + - Support for DSM2 modules + + + + + + PPM center adjustment in limits + + + + + Channel values displayed in us @@ -7626,12 +7652,7 @@ If blank then the mix is considered to be "ON" all the time. - PPM center adjustment in limits - - - - - Channel values displayed in us + Global variables @@ -7644,26 +7665,26 @@ If blank then the mix is considered to be "ON" all the time. - Global variables + Symetrical Limits - - - - - - - - - - Symetrical Limits + + + SmartieParts 2.2 Backlight support - SmartieParts 2.2 Backlight support + + + + + + + + In model setup menus automatically set source by moving the control @@ -7676,30 +7697,30 @@ If blank then the mix is considered to be "ON" all the time. - In model setup menus automatically set source by moving the control + In model setup menus automatically set switch by moving the control - - - - In model setup menus automatically set switch by moving the control + Enable resetting values by pressing up and down at the same time + + - Enable resetting values by pressing up and down at the same time + + No graphical check boxes and sliders @@ -7712,7 +7733,7 @@ If blank then the mix is considered to be "ON" all the time. - No graphical check boxes and sliders + Battery graph @@ -7725,19 +7746,6 @@ If blank then the mix is considered to be "ON" all the time. - Battery graph - - - - - - - - - - - - Don't use bold font for highlighting active items @@ -7763,9 +7771,9 @@ If blank then the mix is considered to be "ON" all the time. - - - + + + Support for a third timer @@ -7780,166 +7788,166 @@ If blank then the mix is considered to be "ON" all the time. - + Removes D8 and LR12 FrSky protocols that are not legal for use in the EU on radios sold after Jan 1st, 2015 - + Support for PPM internal module hack - + ST7565P LCD or compatible - + ST7565R LCD or compatible - + ERC12864FSF LCD - + ST7920 LCD - + 9X board - - - - + + + + Enable the throttle trace in Statistics - + EEprom write progress bar - - - - - - - Imperial units - - - - - - No Winged Shadow How High support - - - - - - No vario support - - - - - - No GPS support - - - - - - No gauges in the custom telemetry screen - - - - - Allow compensating for offset errors in FrSky FAS current sensors - - - - - - Add support for reversing stick inputs (e.g. needed for FrSky gimbals) - - - - - ar9x board / 9X - - - - - FrSky Taranis Plus - - - - - FrSky Taranis X9E - - - + + Imperial units + + + + + + No Winged Shadow How High support + + + + + + No vario support + + + + + + No GPS support + + + + + + No gauges in the custom telemetry screen + + + + + Allow compensating for offset errors in FrSky FAS current sensors + + + + + + Add support for reversing stick inputs (e.g. needed for FrSky gimbals) + + + + + ar9x board / 9X + + + + + FrSky Taranis Plus + + + + + FrSky Taranis X9E + + + + + + + + EEprom write Progress bar - - + + Support for SD memory card - - + + Support of FrSky PXX protocol - + Confirmation before radio shutdown - + Support for DSM2 modules using ppm instead of true serial - + Power management by soft-off circuitry - - + + Adds mixers output view to the CHANNELS MONITOR screen, pressing [ENT] switches between the views - - - + + + Enable HELI menu and cyclic mix support - - - + + + Bluetooth interface @@ -7949,47 +7957,47 @@ If blank then the mix is considered to be "ON" all the time. - + M128 / 9X board - + 9XR - + 9XR with M128 chip - + Gruvin9x board / 9X - + MEGA2560 board - + Sky9x board / 9X - + 9XR-PRO - + FrSky Taranis - + Haptic module installed @@ -7998,11 +8006,6 @@ If blank then the mix is considered to be "ON" all the time. Support for Lua model scripts - - - No Joystick emulation inside the FW (only Mass Storage as in the Bootloader) - - Disable Global variables @@ -9170,7 +9173,7 @@ If this is checked the throttle will be reversed. Idle will be forward, trim wi Meters (m or ft) - + Temp (°) @@ -9493,12 +9496,12 @@ If this is checked the throttle will be reversed. Idle will be forward, trim wi ft - + °C - + °F @@ -9528,7 +9531,7 @@ If this is checked the throttle will be reversed. Idle will be forward, trim wi g - + ° diff --git a/companion/src/translations/companion_pl.ts b/companion/src/translations/companion_pl.ts index abae5b06d..23ac6045d 100644 --- a/companion/src/translations/companion_pl.ts +++ b/companion/src/translations/companion_pl.ts @@ -1,6 +1,6 @@ - + AileronsPage @@ -3006,7 +3006,7 @@ Będą one obowiązywać dla wszystkich modeli w tym samym EEPROM-ie.Measurement Units Jednostki miar - + hh° (N/S) mm' ss''.dd hh° (N/S) mm' ss''.dd @@ -5883,7 +5883,7 @@ p, li { white-space: pre-wrap; } - + FM%1 FM%1 @@ -5909,94 +5909,114 @@ p, li { white-space: pre-wrap; } - Weight Waga - Switch Przełącznik - + NoTrim Bez Trymera - + + Weight(%1) + Waga(%1) + + + + Switch(%1) + Przełącznik(%1) + + + No DR/Expo Bez DR/Expo - + + Offset(%1) + Wyrównanie(%1) + + + + Delay(u%1:d%2) + + + + + Slow((u%1:d%2) + + + Offset - Wyrównanie + Wyrównanie - Delay - Opóźnienie + Opóźnienie - Slow - Spowolnienie + Spowolnienie - + Warn(%1) (%1)Ostrzeżenie - + Disabled in all flight modes Wyłaczone we wszystkich fazach lotu - + Flight modes(%1) Fazy lotu(%1) - + Flight mode(%1) Faza lotu (%1) - + Edge(%1, [%2:%3]) Brzeg(%1, [%2:%3]) - + Sticky(%1, %2) Stały(%1, %2) - + Timer(%1, %2) Timer(%1, %2) - + Duration(%1s) Trwanie(%1s) - + Delay(%1s) Opóznienie(%1) - + Custom Własny - + Standard Standard @@ -7428,13 +7448,13 @@ p, li { white-space: pre-wrap; } Time Czas - + °C °C - + ° @@ -7447,7 +7467,7 @@ p, li { white-space: pre-wrap; } mph mph - + °F °F @@ -7575,45 +7595,55 @@ p, li { white-space: pre-wrap; } !Krzywa(%1) + - Support for frsky telemetry mod Wsparcie dla telemetrii FrSky + - Support for jeti telemetry mod Wsparcie telemetrii JETI + - Support for receiving ardupilot data Wsparcie dla otrzymywania danych ardupilota + - Support for receiving NMEA data Wsparcie dla otrzymywania danych NMEA - + Support for telemetry easy board Wsparcie dla platformy TelemetrEZ + - Support for MAVLINK devices Wsparcie urządzeń MAVLINK - + Rotary Encoder use in menus navigation Użycie pokrętła do nawigacji w menu + + + + + + + + Enable heli menu and cyclic mix support + Uaktywnione menu Heli i wsparcie dla cyklicznych mikserów + @@ -7621,40 +7651,30 @@ p, li { white-space: pre-wrap; } - Enable heli menu and cyclic mix support - Uaktywnione menu Heli i wsparcie dla cyklicznych mikserów + + + + Enable TEMPLATES menu + Uaktywnienie menu szablonów - - - - - - Enable TEMPLATES menu - Uaktywnienie menu szablonów + No splash screen + Bez loga na ekranie - No splash screen - Bez loga na ekranie - - - - - - - - - - - + + + + + No flight modes Firmware bez menu faz lotu @@ -7685,9 +7705,9 @@ p, li { white-space: pre-wrap; } - - - + + + Support for a third timer Wsparcie dla 3ciego Timera @@ -7702,122 +7722,122 @@ p, li { white-space: pre-wrap; } - + Removes D8 and LR12 FrSky protocols that are not legal for use in the EU on radios sold after Jan 1st, 2015 Usuwa protokoły FrSky D8 i LR12,które są nielegalne na terenie UE w radiach sprzedawanych po 01-01-2015 - + Support for PPM internal module hack Wsparcie dla shakowania wewnętrznego modułu PPM - + ERC12864FSF LCD LCD: ERC12864FSF - + ST7920 LCD LCD: ST7920 - + 9X board Płyta 9X - + EEprom write progress bar Pasek postępu wgrywania EEPROMu - - + + No Winged Shadow How High support Bez wsparcia - Winged Shadow How High - - + + No vario support Bez wsparcia wario - - + + No GPS support Bez wsparcia GPS - - + + No gauges in the custom telemetry screen Bez graficznych wskazań telemetrii - + Allow compensating for offset errors in FrSky FAS current sensors Pozwolenie na kompensację błędów w czujnikach natężenia FrSky FAS - + ar9x board / 9X płyta ar9x / 9X - + FrSky Taranis Plus FrSky Taranis Plus - + FrSky Taranis X9E FrSky Taranis X9E - + Confirmation before radio shutdown Potwierdzenie przez wyłączeniem radia - + ST7565P LCD or compatible LCD ST7565P lub kompatybilny - + ST7565R LCD or compatible LCD ST7565R lub kompatybilny - - + + Adds mixers output view to the CHANNELS MONITOR screen, pressing [ENT] switches between the views Dodaje widok wyjścia mikserów do ekrany MONITORA KANAŁÓW, wciśnięcie [ENT] przełącza pomiędzy widokami - + MEGA2560 board Płyta MEGA2560 - + Sky9x board / 9X Płyta Sky9x / 9X - + 9XR-PRO 9XR-PRO - + FrSky Taranis FrSky Taranis - + Haptic module installed Moduł wibracji zainstalowany @@ -7827,9 +7847,8 @@ p, li { white-space: pre-wrap; } Wsparcie dla skryptów LUA - No Joystick emulation inside the FW (only Mass Storage as in the Bootloader) - Brak emulacji joyskicka w FW (Tylko jest karta jako dysk w Bootloaderze) + Brak emulacji joyskicka w FW (Tylko jest karta jako dysk w Bootloaderze) @@ -7841,165 +7860,45 @@ p, li { white-space: pre-wrap; } Disable Global variables dezaktywowane zmienne globalne + + + + + + + + + + + Disable curves menus + Bez menu krzywych + - - - - - - Disable curves menus - Bez menu krzywych + Support for radio modified with regular speaker + Wsparcie dla modyfikacji radia zwykłym głośnikiem - Support for radio modified with regular speaker - Wsparcie dla modyfikacji radia zwykłym głośnikiem + + Used if you have modified your radio with voice mode + Używane jeśli radio jest zmodyfikowane w calu użycia komunikatów głosowych - - Used if you have modified your radio with voice mode - Używane jeśli radio jest zmodyfikowane w calu użycia komunikatów głosowych - - - - - - - + Used if you have modified your radio with haptic mode Używane jeśli radio jest zmodyfikowane do użycia wibracji - - - - - - - - - - - Battery graph - Grafika baterii - - - - - - - Enable the throttle trace in Statistics - Uaktywnić śledzenie gazu w statystykach - - - - M128 / 9X board - Płyta M128 / 9X - - - - 9XR - 9XR - - - - 9XR with M128 chip - 9XR z kością M128 - - - - Gruvin9x board / 9X - Płyta Gruvin9x / 9X - - - - - Support of FrSky PXX protocol - Wsparcie dla protokołu Frsky PXX - - - - - - - - Support for DSM2 modules - wsparcie modułu DSM2 - - - - Your radio probably uses a wrong firmware, - eeprom size is 4096 but only the first 2048 are used - Twoje radio prawdopodobnie używa złego firmware, - wielkość eepromu jest 4096 ale tylko pierwsze 2048 jest używane - - - - - - - - - - - - PPM center adjustment in limits - Limit dostrojenia centrowania PPM - - - - - - - - - - - - Symetrical Limits - Limity symetryczne - - - - - - - - - - Pots use in menus navigation - Użycie potencjometrów do nawigacji w menu - - - - - SmartieParts 2.2 Backlight support - Wsparcie podświetlenia SmartieParts 2.2 - - - - - - - - - Enable resetting values by pressing up and down at the same time - Szybkie nastawianie wartości -(+) a (-) neguje wartość -(+)a (UP) ustawia max -(-) a (DN) ustawia min -(UP) a (DN) ustawia 0 - @@ -8010,47 +7909,71 @@ p, li { white-space: pre-wrap; } - No graphical check boxes and sliders - Brak graficznych pol wyboru i suwaków + Battery graph + Grafika baterii - - - - - - Don't use bold font for highlighting active items - Nie używaj podświetlenia dla wybranych aktywnych elementów, mikserów, krzywych, expo, etc + Enable the throttle trace in Statistics + Uaktywnić śledzenie gazu w statystykach - - - - - - EEprom write Progress bar - Pasek postępu zapisywania EEPROM + + M128 / 9X board + Płyta M128 / 9X - - - - - - - Imperial units - Imperialne jednostki w telemetrii + + 9XR + 9XR - - - - Bluetooth interface - Interface Bluetooth + + 9XR with M128 chip + 9XR z kością M128 + + + + Gruvin9x board / 9X + Płyta Gruvin9x / 9X + + + + + Support of FrSky PXX protocol + Wsparcie dla protokołu Frsky PXX + + + + + + + + Support for DSM2 modules + wsparcie modułu DSM2 + + + + Your radio probably uses a wrong firmware, + eeprom size is 4096 but only the first 2048 are used + Twoje radio prawdopodobnie używa złego firmware, + wielkość eepromu jest 4096 ale tylko pierwsze 2048 jest używane + + + + + + + + + + + + PPM center adjustment in limits + Limit dostrojenia centrowania PPM @@ -8062,6 +7985,102 @@ p, li { white-space: pre-wrap; } + Symetrical Limits + Limity symetryczne + + + + + + + + + + Pots use in menus navigation + Użycie potencjometrów do nawigacji w menu + + + + + SmartieParts 2.2 Backlight support + Wsparcie podświetlenia SmartieParts 2.2 + + + + + + + + + Enable resetting values by pressing up and down at the same time + Szybkie nastawianie wartości +(+) a (-) neguje wartość +(+)a (UP) ustawia max +(-) a (DN) ustawia min +(UP) a (DN) ustawia 0 + + + + + + + + + + + + No graphical check boxes and sliders + Brak graficznych pol wyboru i suwaków + + + + + + + + + + + + Don't use bold font for highlighting active items + Nie używaj podświetlenia dla wybranych aktywnych elementów, mikserów, krzywych, expo, etc + + + + + + + + EEprom write Progress bar + Pasek postępu zapisywania EEPROM + + + + + + + + + Imperial units + Imperialne jednostki w telemetrii + + + + + + Bluetooth interface + Interface Bluetooth + + + + + + + + + + + Global variables Globalne zmienne @@ -8070,6 +8089,19 @@ p, li { white-space: pre-wrap; } (displaying only first 10 warnings) (wyświetlanie tylko pierwszych 10 ostrzeżeń) + + + + + + + + + + + In model setup menus automatically set source by moving the control + W menu ustawień modelu automatycznie wybierz źródło poprzez poruszenie nim + @@ -8080,48 +8112,35 @@ p, li { white-space: pre-wrap; } - In model setup menus automatically set source by moving the control - W menu ustawień modelu automatycznie wybierz źródło poprzez poruszenie nim - - - - - - - - - - - In model setup menus automatically set switch by moving the control W menu ustawień modelu automatycznie wybierz źródło poprzez poruszenie nim - - + + Add support for reversing stick inputs (e.g. needed for FrSky gimbals) Dodanie wsparcia dla odwracania wejścia drążków (np. potrzebne dla gimbali FrSky) - - + + Support for SD memory card Wsparcie karty SD - + Support for DSM2 modules using ppm instead of true serial Wsparcie modułu DSM2 przez użycie PPM zamiast prawdziwego szeregowego - + Power management by soft-off circuitry Zarządzanie zasilaniem przez obwód Soft-Off - - - + + + Enable HELI menu and cyclic mix support Uaktywnij menu HELI i cyklicznych mikserów @@ -9158,6 +9177,14 @@ p, li { white-space: pre-wrap; } Switch Przełącznik + + Weight(%1) + Waga(%1) + + + Switch(%1) + Przełącznik(%1) + NoTrim BezTrymera @@ -9166,6 +9193,14 @@ p, li { white-space: pre-wrap; } No DR/Expo Bez DR/Expo + + Offset(%1) + Wyrównanie(%1) + + + Warn(%1) + (%1)Ostrzeżenie + Offset Wyrównanie @@ -10297,7 +10332,7 @@ Wolne obroty będą na górze, trymer i ostrzeżenie o otwartym gazie również Meters (m or ft) Wysokość (m albo ft) - + Temp (°) Temp (°) @@ -10628,12 +10663,12 @@ Wolne obroty będą na górze, trymer i ostrzeżenie o otwartym gazie również ft ft - + °C °C - + °F °F @@ -10663,7 +10698,7 @@ Wolne obroty będą na górze, trymer i ostrzeżenie o otwartym gazie również g g - + ° ° @@ -10737,11 +10772,11 @@ Wolne obroty będą na górze, trymer i ostrzeżenie o otwartym gazie również Positive Dodatni - + Temp (°C) Temp (°C) - + Temp (°F) Temp (°F) @@ -10770,7 +10805,7 @@ Wolne obroty będą na górze, trymer i ostrzeżenie o otwartym gazie również Acceleration (g) Przyspieszenie (g) - + Heading (°) Kurs (°) diff --git a/companion/src/translations/companion_pt.ts b/companion/src/translations/companion_pt.ts index 9ab133e4f..717a5f560 100644 --- a/companion/src/translations/companion_pt.ts +++ b/companion/src/translations/companion_pt.ts @@ -1,6 +1,6 @@ - + AileronsPage @@ -3433,7 +3433,7 @@ p, li { white-space: pre-wrap; } X-Long - + hh° (N/S) mm' ss''.dd @@ -5522,7 +5522,7 @@ This determines how mixer values are added. - + FM%1 @@ -5548,94 +5548,110 @@ This determines how mixer values are added. - Weight Peso - Switch Interruptor - + NoTrim - + + Weight(%1) + + + + + Switch(%1) + + + + No DR/Expo - - Offset + + Offset(%1) - - Delay - Atraso + + Delay(u%1:d%2) + - - Slow - Lento + + Slow((u%1:d%2) + - + Warn(%1) - + Delay + Atraso + + + Slow + Lento + + + Disabled in all flight modes - + Flight modes(%1) - + Flight mode(%1) - + Edge(%1, [%2:%3]) - + Sticky(%1, %2) - + Timer(%1, %2) - + Duration(%1s) - + Delay(%1s) - + Custom - + Standard @@ -7778,13 +7794,13 @@ This determines how mixer values are added. m - + °C - + ° @@ -7822,7 +7838,7 @@ This determines how mixer values are added. A - + °F @@ -7998,45 +8014,55 @@ This determines how mixer values are added. + - Support for frsky telemetry mod + - Support for jeti telemetry mod + - Support for receiving ardupilot data + - Support for receiving NMEA data - + Support for telemetry easy board + - Support for MAVLINK devices - + Rotary Encoder use in menus navigation + + + + + + + + Enable heli menu and cyclic mix support + + @@ -8044,7 +8070,10 @@ This determines how mixer values are added. - Enable heli menu and cyclic mix support + + + + Enable TEMPLATES menu @@ -8052,20 +8081,20 @@ This determines how mixer values are added. - - - - - - Enable TEMPLATES menu + No splash screen - - - - - No splash screen + + + + + + + + + + Disable curves menus @@ -8073,12 +8102,7 @@ This determines how mixer values are added. - - - - - - Disable curves menus + Support for radio modified with regular speaker @@ -8086,7 +8110,8 @@ This determines how mixer values are added. - Support for radio modified with regular speaker + + Used if you have modified your radio with voice mode @@ -8094,16 +8119,7 @@ This determines how mixer values are added. - - Used if you have modified your radio with voice mode - - - - - - - - + Used if you have modified your radio with haptic mode @@ -8112,6 +8128,19 @@ This determines how mixer values are added. Channel values displayed in us + + + + + + + + + + + In model setup menus automatically set source by moving the control + + @@ -8122,19 +8151,6 @@ This determines how mixer values are added. - In model setup menus automatically set source by moving the control - - - - - - - - - - - - In model setup menus automatically set switch by moving the control @@ -8160,9 +8176,9 @@ This determines how mixer values are added. - - - + + + Support for a third timer @@ -8177,131 +8193,131 @@ This determines how mixer values are added. - + Removes D8 and LR12 FrSky protocols that are not legal for use in the EU on radios sold after Jan 1st, 2015 - + Support for PPM internal module hack - + ST7565P LCD or compatible - + ST7565R LCD or compatible - + ERC12864FSF LCD - + ST7920 LCD - + 9X board - - - - + + + + Enable the throttle trace in Statistics - + EEprom write progress bar + + + + No Winged Shadow How High support + + - No Winged Shadow How High support + No vario support - No vario support + No GPS support - No GPS support - - - - - No gauges in the custom telemetry screen - + Allow compensating for offset errors in FrSky FAS current sensors - - + + Add support for reversing stick inputs (e.g. needed for FrSky gimbals) - + Power management by soft-off circuitry - + ar9x board / 9X - + 9XR-PRO - + FrSky Taranis - + FrSky Taranis Plus - + FrSky Taranis X9E - + Confirmation before radio shutdown - - + + Adds mixers output view to the CHANNELS MONITOR screen, pressing [ENT] switches between the views - + Haptic module installed @@ -8311,13 +8327,8 @@ This determines how mixer values are added. - - No Joystick emulation inside the FW (only Mass Storage as in the Bootloader) - - - - - + + Support of FrSky PXX protocol @@ -8332,48 +8343,48 @@ This determines how mixer values are added. - - - - - + + + + + Support for DSM2 modules - - - - - - - - - + + + + + + + + + PPM center adjustment in limits - - - - - - - - - + + + + + + + + + Symetrical Limits - - - - - - - + + + + + + + Pots use in menus navigation @@ -8389,32 +8400,45 @@ This determines how mixer values are added. - - - - - - - - - + + + + + + + + + No flight modes - - + + SmartieParts 2.2 Backlight support + + + + + + + + Enable resetting values by pressing up and down at the same time + + + + - Enable resetting values by pressing up and down at the same time + + No graphical check boxes and sliders @@ -8427,7 +8451,7 @@ This determines how mixer values are added. - No graphical check boxes and sliders + Battery graph @@ -8440,106 +8464,93 @@ This determines how mixer values are added. - Battery graph - - - - - - - - - - - - Don't use bold font for highlighting active items + + + + + + EEprom write Progress bar + + + + - EEprom write Progress bar - - - - - - - - - Imperial units - + M128 / 9X board - + 9XR - + 9XR with M128 chip - + Gruvin9x board / 9X - + MEGA2560 board - + Sky9x board / 9X - - - + + + Bluetooth interface - - - - - - - - - + + + + + + + + + Global variables - - + + Support for SD memory card - + Support for DSM2 modules using ppm instead of true serial - - - + + + Enable HELI menu and cyclic mix support @@ -9630,7 +9641,7 @@ If this is checked the throttle will be reversed. Idle will be forward, trim wi Meters (m or ft) - + Temp (°) @@ -9953,12 +9964,12 @@ If this is checked the throttle will be reversed. Idle will be forward, trim wi ft - + °C - + °F @@ -9988,7 +9999,7 @@ If this is checked the throttle will be reversed. Idle will be forward, trim wi g - + ° diff --git a/companion/src/translations/companion_ru.ts b/companion/src/translations/companion_ru.ts index c934c1afe..a3443a017 100644 --- a/companion/src/translations/companion_ru.ts +++ b/companion/src/translations/companion_ru.ts @@ -1,6 +1,6 @@ - + AileronsPage @@ -3516,7 +3516,7 @@ p, li { white-space: pre-wrap; } X-Long - + hh° (N/S) mm' ss''.dd @@ -5652,7 +5652,7 @@ p, li { white-space: pre-wrap; } - + FM%1 @@ -5678,94 +5678,114 @@ p, li { white-space: pre-wrap; } - Weight Вес - Switch Тумблер - + NoTrim - + + Weight(%1) + + + + + Switch(%1) + + + + No DR/Expo - - Offset - Смещен. + + Offset(%1) + - - Delay - Задержка + + Delay(u%1:d%2) + - - Slow - Замедлен. + + Slow((u%1:d%2) + - + Warn(%1) - + Offset + Смещен. + + + Delay + Задержка + + + Slow + Замедлен. + + + Disabled in all flight modes - + Flight modes(%1) - + Flight mode(%1) - + Edge(%1, [%2:%3]) - + Sticky(%1, %2) - + Timer(%1, %2) - + Duration(%1s) - + Delay(%1s) - + Custom - + Standard @@ -7841,13 +7861,13 @@ p, li { white-space: pre-wrap; } m - + °C - + ° @@ -7885,7 +7905,7 @@ p, li { white-space: pre-wrap; } A - + °F @@ -8141,45 +8161,55 @@ p, li { white-space: pre-wrap; } ВЫКЛ + - Support for frsky telemetry mod + - Support for jeti telemetry mod + - Support for receiving ardupilot data + - Support for receiving NMEA data - + Support for telemetry easy board + - Support for MAVLINK devices - + Rotary Encoder use in menus navigation + + + + + + + + Enable heli menu and cyclic mix support + + @@ -8187,7 +8217,10 @@ p, li { white-space: pre-wrap; } - Enable heli menu and cyclic mix support + + + + Enable TEMPLATES menu @@ -8195,20 +8228,20 @@ p, li { white-space: pre-wrap; } - - - - - - Enable TEMPLATES menu + No splash screen - - - - - No splash screen + + + + + + + + + + Disable curves menus @@ -8216,12 +8249,7 @@ p, li { white-space: pre-wrap; } - - - - - - Disable curves menus + Support for radio modified with regular speaker @@ -8229,7 +8257,8 @@ p, li { white-space: pre-wrap; } - Support for radio modified with regular speaker + + Used if you have modified your radio with voice mode @@ -8237,16 +8266,7 @@ p, li { white-space: pre-wrap; } - - Used if you have modified your radio with voice mode - - - - - - - - + Used if you have modified your radio with haptic mode @@ -8255,6 +8275,19 @@ p, li { white-space: pre-wrap; } Channel values displayed in us + + + + + + + + + + + In model setup menus automatically set source by moving the control + + @@ -8265,19 +8298,6 @@ p, li { white-space: pre-wrap; } - In model setup menus automatically set source by moving the control - - - - - - - - - - - - In model setup menus automatically set switch by moving the control @@ -8303,9 +8323,9 @@ p, li { white-space: pre-wrap; } - - - + + + Support for a third timer @@ -8320,131 +8340,131 @@ p, li { white-space: pre-wrap; } - + Removes D8 and LR12 FrSky protocols that are not legal for use in the EU on radios sold after Jan 1st, 2015 - + Support for PPM internal module hack - + ST7565P LCD or compatible - + ST7565R LCD or compatible - + ERC12864FSF LCD - + ST7920 LCD - + 9X board - - - - + + + + Enable the throttle trace in Statistics - + EEprom write progress bar + + + + No Winged Shadow How High support + + - No Winged Shadow How High support + No vario support - No vario support + No GPS support - No GPS support - - - - - No gauges in the custom telemetry screen - + Allow compensating for offset errors in FrSky FAS current sensors - - + + Add support for reversing stick inputs (e.g. needed for FrSky gimbals) - + Power management by soft-off circuitry - + ar9x board / 9X - + 9XR-PRO - + FrSky Taranis - + FrSky Taranis Plus - + FrSky Taranis X9E - + Confirmation before radio shutdown - - + + Adds mixers output view to the CHANNELS MONITOR screen, pressing [ENT] switches between the views - + Haptic module installed @@ -8454,13 +8474,8 @@ p, li { white-space: pre-wrap; } - - No Joystick emulation inside the FW (only Mass Storage as in the Bootloader) - - - - - + + Support of FrSky PXX protocol @@ -8475,48 +8490,48 @@ p, li { white-space: pre-wrap; } - - - - - + + + + + Support for DSM2 modules - - - - - - - - - + + + + + + + + + PPM center adjustment in limits - - - - - - - - - + + + + + + + + + Symetrical Limits - - - - - - - + + + + + + + Pots use in menus navigation @@ -8532,32 +8547,45 @@ p, li { white-space: pre-wrap; } - - - - - - - - - + + + + + + + + + No flight modes - - + + SmartieParts 2.2 Backlight support + + + + + + + + Enable resetting values by pressing up and down at the same time + + + + - Enable resetting values by pressing up and down at the same time + + No graphical check boxes and sliders @@ -8570,7 +8598,7 @@ p, li { white-space: pre-wrap; } - No graphical check boxes and sliders + Battery graph @@ -8583,106 +8611,93 @@ p, li { white-space: pre-wrap; } - Battery graph - - - - - - - - - - - - Don't use bold font for highlighting active items + + + + + + EEprom write Progress bar + + + + - EEprom write Progress bar - - - - - - - - - Imperial units - + M128 / 9X board - + 9XR - + 9XR with M128 chip - + Gruvin9x board / 9X - + MEGA2560 board - + Sky9x board / 9X - - - + + + Bluetooth interface - - - - - - - - - + + + + + + + + + Global variables - - + + Support for SD memory card - + Support for DSM2 modules using ppm instead of true serial - - - + + + Enable HELI menu and cyclic mix support @@ -9676,7 +9691,7 @@ If this is checked the throttle will be reversed. Idle will be forward, trim wi Meters (m or ft) - + Temp (°) @@ -9999,12 +10014,12 @@ If this is checked the throttle will be reversed. Idle will be forward, trim wi ft - + °C - + °F @@ -10034,7 +10049,7 @@ If this is checked the throttle will be reversed. Idle will be forward, trim wi g - + ° diff --git a/companion/src/translations/companion_sv.ts b/companion/src/translations/companion_sv.ts index af3cdd7d1..c84775738 100644 --- a/companion/src/translations/companion_sv.ts +++ b/companion/src/translations/companion_sv.ts @@ -1,6 +1,6 @@ - + AileronsPage @@ -2495,7 +2495,7 @@ Dessa inställningar gäller för alla modeller. Measurement Units Måttenheter - + hh° (N/S) mm' ss''.dd hh° (N/S) mm' ss''.dd @@ -5047,19 +5047,15 @@ p, li { white-space: pre-wrap; } Offset - Offset + Offset Delay - Fördröjning + Fördröjning Slow - Tröghet - - - Warn(%1) - + Tröghet Disabled in all flight modes @@ -5101,6 +5097,30 @@ p, li { white-space: pre-wrap; } Standard Standard + + Weight(%1) + Vikt(%1) + + + Switch(%1) + Brytare(%1) + + + Offset(%1) + Offset(%1) + + + Delay(u%1:d%2) + + + + Slow((u%1:d%2) + + + + Warn(%1) + + ModelSelectionPage @@ -6023,11 +6043,11 @@ p, li { white-space: pre-wrap; } m m - + °C °C - + ° ° @@ -7503,7 +7523,7 @@ OpenTX-gruppen. No Joystick emulation inside the FW (only Mass Storage as in the Bootloader) - Ingen Joystick-emulering -> Direkt åtkomst till minnet utan att hålla in trimmar vid start + Ingen Joystick-emulering -> Direkt åtkomst till minnet utan att hålla in trimmar vid start SWR value will be available for display/audio/alarms - Only available on latest Taranis+ production @@ -7715,7 +7735,7 @@ OpenTX-gruppen. Flight Flygning - + °F °F @@ -7847,6 +7867,18 @@ OpenTX-gruppen. ar9x board / 9X + + Weight(%1) + Vikt(%1) + + + Switch(%1) + Brytare(%1) + + + Offset(%1) + Offset(%1) + RadioNotFoundDialog @@ -8469,7 +8501,7 @@ Gasen reverseras om alternativet väljs. Tomgång ligger då uppåt. Trim och ga Meters (m or ft) Meter (m eller ft) - + Temp (°) Temp (°) @@ -8722,11 +8754,11 @@ Gasen reverseras om alternativet väljs. Tomgång ligger då uppåt. Trim och ga Feet (f) Fot (f) - + Temp (°C) Temp (°C) - + Temp (°F) Temp (°F) @@ -8798,7 +8830,7 @@ Gasen reverseras om alternativet väljs. Tomgång ligger då uppåt. Trim och ga Acceleration (g) Acceleration (g) - + Heading (°) Riktning (°) @@ -8874,11 +8906,11 @@ Gasen reverseras om alternativet väljs. Tomgång ligger då uppåt. Trim och ga ft ft - + °C °C - + °F °F @@ -8902,7 +8934,7 @@ Gasen reverseras om alternativet väljs. Tomgång ligger då uppåt. Trim och ga g g - + ° °