Schwabe/silence register warnings clang (#3940)

* Ignore deprecated register warning for the the STM include files

Ignore the warning with the use of #pragma which is not elegant but otherwise we would have to change the vendor files

* Remove usage of register in C/C++ files.

Modern compilers ignore it anyway and C++11 actually deprecates it. Removing also removes a number of clang warnings about this
This commit is contained in:
Arne Schwabe
2016-10-21 00:09:54 +02:00
committed by Bertrand Songis
parent ba824537d4
commit ad8cd2546e
21 changed files with 140 additions and 116 deletions
+15 -15
View File
@@ -50,7 +50,7 @@ extern "C" void sam_boot( void ) ;
inline void config_free_pins()
{
#if defined(REVA)
register Pio * pioptr = PIOA ;
Pio * pioptr = PIOA ;
pioptr->PIO_PER = 0x03800000L ; // Enable bits A25,24,23
pioptr->PIO_ODR = 0x03800000L ; // Set as input
pioptr->PIO_PUER = 0x03800000L ; // Enable pullups
@@ -73,7 +73,7 @@ inline void config_free_pins()
inline void setup_switches()
{
#if defined(REVA)
register Pio *pioptr = PIOA ;
Pio *pioptr = PIOA ;
pioptr->PIO_PER = 0xF8008184 ; // Enable bits
pioptr->PIO_ODR = 0xF8008184 ; // Set bits input
pioptr->PIO_PUER = 0xF8008184 ; // Set bits with pullups
@@ -97,7 +97,7 @@ inline void setup_switches()
#if !defined(SIMU)
inline void UART3_Configure(uint32_t baudrate, uint32_t masterClock)
{
register Uart *pUart = BT_USART;
Uart *pUart = BT_USART;
/* Configure PIO */
configure_pins( (PIO_PB2 | PIO_PB3), PIN_PERIPHERAL | PIN_INPUT | PIN_PER_A | PIN_PORTB | PIN_NO_PULLUP ) ;
@@ -139,7 +139,7 @@ void UART3_Stop()
// This was 6 MHz, we may need to slow it to TIMER_CLOCK2 (MCK/8=4.5 MHz)
inline void start_timer0()
{
register Tc *ptc ;
Tc *ptc ;
// Enable peripheral clock TC0 = bit 23 thru TC5 = bit 28
PMC->PMC_PCER0 |= 0x00800000L ; // Enable peripheral clock to TC0
@@ -158,8 +158,8 @@ inline void start_timer0()
// Starts TIMER2 at 200Hz, commentd out drive of TIOA2 (A26, EXT2)
inline void start_timer2()
{
register Tc *ptc ;
register uint32_t timer ;
Tc *ptc ;
uint32_t timer ;
// Enable peripheral clock TC0 = bit 23 thru TC5 = bit 28
PMC->PMC_PCER0 |= 0x02000000L ; // Enable peripheral clock to TC2
@@ -195,7 +195,7 @@ void interrupt5ms()
extern "C" void TC2_IRQHandler()
{
register uint32_t dummy;
uint32_t dummy;
/* Clear status bit to acknowledge interrupt */
dummy = TC0->TC_CHANNEL[2].TC_SR;
@@ -220,8 +220,8 @@ extern "C" void TC2_IRQHandler()
// For testing, just drive it out with PWM
void init_pwm()
{
register Pwm *pwmptr ;
register uint32_t timer ;
Pwm *pwmptr ;
uint32_t timer ;
PMC->PMC_PCER0 |= ( 1 << ID_PWM ) ; // Enable peripheral clock to PWM
@@ -229,7 +229,7 @@ void init_pwm()
/* Configure PIO */
#if defined(REVA)
register Pio *pioptr = PIOB ;
Pio *pioptr = PIOB ;
pioptr->PIO_PER = 0x00000020L ; // Enable bit B5
pioptr->PIO_ODR = 0x00000020L ; // set as input
#else
@@ -299,7 +299,7 @@ void init_pwm()
void configure_pins( uint32_t pins, uint16_t config )
{
register Pio *pioptr ;
Pio *pioptr ;
pioptr = PIOA + ( ( config & PIN_PORT_MASK ) >> 6) ;
if ( config & PIN_PULLUP )
@@ -374,8 +374,8 @@ void opentxBootloader();
#if !defined(AR9X)
void i2cInit()
{
register Pio *pioptr;
register uint32_t timing;
Pio *pioptr;
uint32_t timing;
PMC->PMC_PCER0 |= 0x00080000L ; // Enable peripheral clock to TWI0
@@ -410,7 +410,7 @@ void boardInit()
}
}
register Pio *pioptr ;
Pio *pioptr ;
ResetReason = RSTC->RSTC_SR;
@@ -547,7 +547,7 @@ uint8_t getTemperature()
void setSticksGain(uint8_t gains)
{
register Adc *padc ;
Adc *padc ;
uint32_t gain ;
uint32_t offset ;