Files movement.

Issue 26 fixed (JETI)
This commit is contained in:
bsongis@gmail.com
2013-05-07 05:42:43 +00:00
parent 37880ee9ec
commit c7c907e7ce
306 changed files with 937 additions and 892 deletions
+150
View File
@@ -0,0 +1,150 @@
/**
******************************************************************************
* @file Project/lcd/lcd.c
* @author FrSky Application Team
* @Hardware version V0.2
* @date 11-July-2012
* @brief This file provides LCD Init and botom drivers.
* *
******************************************************************************
*/
#include "../opentx.h"
#define WriteData(x) AspiData(x)
#define WriteCommand(x) AspiCmd(x)
void Set_Address(u8 x, u8 y)
{
WriteCommand(x&0x0F); //Set Column Address LSB CA[3:0]
WriteCommand((x>>4)|0x10); //Set Column Address MSB CA[7:4]
WriteCommand((y&0x0F)|0x60); //Set Row Address LSB RA [3:0]
WriteCommand(((y>>4)&0x0F)|0x70); //Set Row Address MSB RA [7:4]
}
#define PALETTE_IDX(p, x, mask) (((p[x] & mask) ? 0x1 : 0) + ((p[DISPLAY_PLAN_SIZE+x] & mask) ? 0x2 : 0) + ((p[2*DISPLAY_PLAN_SIZE+x] & mask) ? 0x4 : 0) + ((p[3*DISPLAY_PLAN_SIZE+x] & mask) ? 0x8 : 0))
const uint8_t lcdPalette[4] = { 0, 0x03, 0x06, 0x0F };
#define LCD_WRITE_BIT(bit) \
if (bit) \
GPIOD->BSRRL = PIN_LCD_MOSI; \
else \
GPIOD->BSRRH = PIN_LCD_MOSI; \
GPIOD->BSRRH = PIN_LCD_CLK; /* Clock low */ \
__no_operation(); \
GPIOD->BSRRL = PIN_LCD_CLK; /* Clock high */
void lcdRefresh()
{
for (uint32_t y=0; y<LCD_H; y++) {
uint8_t *p = &displayBuf[(y>>3)*LCD_W];
uint8_t mask = (1 << (y%8));
Set_Address(0, y);
AspiCmd(0xAF);
LCD_CLK_HIGH();
LCD_A0_HIGH();
LCD_NCS_LOW();
for (uint32_t x=0; x<LCD_W; x++) {
LCD_WRITE_BIT(p[3*DISPLAY_PLAN_SIZE+x] & mask);
LCD_WRITE_BIT(p[2*DISPLAY_PLAN_SIZE+x] & mask);
LCD_WRITE_BIT(p[DISPLAY_PLAN_SIZE+x] & mask);
LCD_WRITE_BIT(p[x] & mask);
}
LCD_NCS_HIGH();
LCD_A0_HIGH();
WriteData(0);
}
}
/* Init the Backlight GPIO */
static void LCD_BL_Config()
{
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOBL, ENABLE);
GPIO_InitTypeDef GPIO_InitStructure;
GPIO_InitStructure.GPIO_Pin =GPIO_Pin_BL;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
GPIO_Init(GPIOBL, &GPIO_InitStructure);
}
/** Init the anolog spi gpio
*/
static void LCD_Hardware_Init()
{
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_LCD, ENABLE);
GPIO_InitTypeDef GPIO_InitStructure;
/*!< Configure lcd CLK\ MOSI\ A0pin in output pushpull mode *************/
GPIO_InitStructure.GPIO_Pin =PIN_LCD_MOSI | PIN_LCD_CLK | PIN_LCD_A0;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT;
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
GPIO_Init(GPIO_LCD, &GPIO_InitStructure);
/*!< Configure lcd NCS pin in output pushpull mode ,PULLUP *************/
GPIO_InitStructure.GPIO_Pin = PIN_LCD_NCS;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT;
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP;
GPIO_Init(GPIO_LCD, &GPIO_InitStructure);
}
static void LCD_Init()
{
/*Hardware Reset need delay*/
/*LCD_RST_LOW();
Delay(50);
LCD_RST_HIGH();*/
AspiCmd(0x25); //Temperature compensation curve definition: 0x25 = -0.05%/oC
AspiCmd(0x2b); //Panel loading set ,Internal VLCD.
AspiCmd(0xEA); //set bias=1/10 :Command table NO.27
AspiCmd(0x81); //Set Vop
AspiCmd(50); //0--255
AspiCmd(0xA6); //inverse display off
AspiCmd(0xD1); //SET RGB:Command table NO.21 .SET RGB or BGR. D1=RGB
AspiCmd(0xD5); //set color mode 4K and 12bits :Command table NO.22
AspiCmd(0xA0); //line rates,25.2 Klps
AspiCmd(0xC8); //SET N-LINE INVERSION
AspiCmd(0x00); //Disable NIV
AspiCmd(0xF1); //Set CEN
AspiCmd(0x3F); // 1/64DUTY
AspiCmd(0x84); //Disable Partial Display
AspiCmd(0xC4); //MY=1,MX=0
AspiCmd(0x89); //WA=1,column (CA) increment (+1) first until CA reaches CA boundary, then RA will increment by (+1).
AspiCmd(0xF8); //Set Window Program Enable ,inside modle
AspiCmd(0xF4); //starting column address of RAM program window.
AspiCmd(0x00);
AspiCmd(0xF5); //starting row address of RAM program window.
AspiCmd(0x60);
AspiCmd(0xF6); //ending column address of RAM program window.
AspiCmd(0x47);
AspiCmd(0xF7); //ending row address of RAM program window.
AspiCmd(0x9F);
AspiCmd(0xAF); //dc2=1, IC into exit SLEEP MODE, dc3=1 gray=ON, dc4=1 Green Enhanc mode disabled
}
void lcdInit()
{
LCD_BL_Config();
LCD_Hardware_Init();
LCD_Init();
}
void lcdSetRefVolt(uint8_t val)
{
}