refactor(f4): use generic init system on F4 targets (#6183)
Co-authored-by: Richard Li <richard.li@ces.hk>
This commit is contained in:
co-authored by
Richard Li
parent
538721ef6b
commit
dd013e88e9
@@ -73,21 +73,20 @@ add_definitions(-DSTM32F4)
|
||||
|
||||
if(CPU_TYPE_FULL STREQUAL STM32F429xI)
|
||||
set(CMSIS_SRC ${CMSIS_SRC}
|
||||
boards/generic_stm32/startup/startup_stm32f42_43xxx.s
|
||||
)
|
||||
elseif (CPU_TYPE_FULL STREQUAL STM32F413xG)
|
||||
set(CMSIS_SRC ${CMSIS_SRC}
|
||||
boards/generic_stm32/startup/startup_stm32f413xx.s
|
||||
targets/common/arm/stm32/f4/vectors_stm32f429xx.c
|
||||
)
|
||||
else()
|
||||
set(CMSIS_SRC ${CMSIS_SRC}
|
||||
boards/generic_stm32/startup/startup_stm32f40_41xxx.s
|
||||
targets/common/arm/stm32/f4/vectors_stm32f407xx.c
|
||||
)
|
||||
endif()
|
||||
|
||||
add_library(cmsis INTERFACE)
|
||||
|
||||
target_sources(cmsis INTERFACE
|
||||
targets/common/arm/stm32/system_init.c
|
||||
targets/common/arm/stm32/cortex_m_isr.c
|
||||
targets/common/arm/stm32/f4/system_clock.c
|
||||
targets/common/arm/stm32/f4/system_stm32f4xx.c
|
||||
${CMSIS_SRC}
|
||||
)
|
||||
|
||||
@@ -21,7 +21,7 @@
|
||||
|
||||
#pragma once
|
||||
|
||||
#define __INIT_HOOK
|
||||
#define __INIT_HOOK __attribute__((section(".init_hook")))
|
||||
|
||||
#define __CCMRAM __attribute__((section(".ccm"), aligned(4)))
|
||||
#define __DMA __attribute__((section(".ram"), aligned(4)))
|
||||
|
||||
@@ -0,0 +1,82 @@
|
||||
/*
|
||||
* Copyright (C) EdgeTX
|
||||
*
|
||||
* Based on code named
|
||||
* opentx - https://github.com/opentx/opentx
|
||||
* th9x - http://code.google.com/p/th9x
|
||||
* er9x - http://code.google.com/p/er9x
|
||||
* gruvin9x - http://code.google.com/p/gruvin9x
|
||||
*
|
||||
* License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#include "stm32f4xx_ll_pwr.h"
|
||||
#include "stm32f4xx_ll_rcc.h"
|
||||
#include "stm32f4xx_ll_system.h"
|
||||
#include "stm32f4xx_ll_bus.h"
|
||||
|
||||
#define PLL_M LL_RCC_PLLM_DIV_12
|
||||
#define PLL_N 336
|
||||
#define PLL_Q LL_RCC_PLLQ_DIV_7
|
||||
// #define PLL_P LL_RCC_PLLP_DIV_2
|
||||
|
||||
/**
|
||||
* @brief System Clock Configuration
|
||||
* The system Clock is configured as follow :
|
||||
* System Clock source = PLL (HSE)
|
||||
* SYSCLK(Hz) = 168000000
|
||||
* HCLK(Hz) = 168000000
|
||||
* AHB Prescaler = 1
|
||||
* APB1 Prescaler = 2
|
||||
* APB2 Prescaler = 1
|
||||
* HSE Frequency(Hz) = 12000000
|
||||
* PLL_M = 12
|
||||
* PLL_N = 336
|
||||
* PLL_P = 2
|
||||
* VDD(V) = 3.3
|
||||
* Main regulator output voltage = Scale1 mode
|
||||
* Flash Latency(WS) = 5
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SystemClock_Config(void)
|
||||
{
|
||||
/* Enable HSE oscillator */
|
||||
LL_RCC_HSE_Enable();
|
||||
while (LL_RCC_HSE_IsReady() != 1) {
|
||||
}
|
||||
|
||||
/* Set FLASH latency */
|
||||
LL_FLASH_SetLatency(LL_FLASH_LATENCY_5);
|
||||
|
||||
/* Enable PWR clock */
|
||||
LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_PWR);
|
||||
|
||||
/* Setup voltage regulator */
|
||||
LL_PWR_SetRegulVoltageScaling(LL_PWR_REGU_VOLTAGE_SCALE1);
|
||||
|
||||
/* Main PLL configuration and activation */
|
||||
LL_RCC_PLL_ConfigDomain_48M(LL_RCC_PLLSOURCE_HSE, PLL_M, PLL_N, PLL_Q);
|
||||
LL_RCC_PLL_Enable();
|
||||
while (LL_RCC_PLL_IsReady() != 1) {
|
||||
}
|
||||
|
||||
/* Sysclk activation on the main PLL */
|
||||
LL_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_1);
|
||||
LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL);
|
||||
while (LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL) {
|
||||
}
|
||||
|
||||
/* Set APB1 & APB2 prescaler */
|
||||
LL_RCC_SetAPB1Prescaler(LL_RCC_APB1_DIV_4);
|
||||
LL_RCC_SetAPB2Prescaler(LL_RCC_APB2_DIV_2);
|
||||
}
|
||||
@@ -2,108 +2,32 @@
|
||||
******************************************************************************
|
||||
* @file system_stm32f4xx.c
|
||||
* @author MCD Application Team
|
||||
* @version V1.1.0
|
||||
* @date 25-March-2016
|
||||
* @brief CMSIS Cortex-M4 Device Peripheral Access Layer System Source File.
|
||||
* This file contains the system clock configuration for STM32F4xx devices,
|
||||
* and is generated by the clock configuration tool
|
||||
* stm32f4xx_Clock_Configuration_V1.1.0.xls
|
||||
*
|
||||
* 1. This file provides two functions and one global variable to be called from
|
||||
* user application:
|
||||
* - SystemInit(): Setups the system clock (System clock source, PLL Multiplier
|
||||
* and Divider factors, AHB/APBx prescalers and Flash settings),
|
||||
* depending on the configuration made in the clock xls tool.
|
||||
* This function is called at startup just after reset and
|
||||
* This file provides two functions and one global variable to be called from
|
||||
* user application:
|
||||
* - SystemInit(): This function is called at startup just after reset and
|
||||
* before branch to main program. This call is made inside
|
||||
* the "startup_stm32f4xx.s" file.
|
||||
*
|
||||
* - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
|
||||
* by the user application to setup the SysTick
|
||||
* by the user application to setup the SysTick
|
||||
* timer or configure other parameters.
|
||||
*
|
||||
*
|
||||
* - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
|
||||
* be called whenever the core clock is changed
|
||||
* during program execution.
|
||||
*
|
||||
* 2. After each device reset the HSI (16 MHz) is used as system clock source.
|
||||
* Then SystemInit() function is called, in "startup_stm32f4xx.s" file, to
|
||||
* configure the system clock before to branch to main program.
|
||||
*
|
||||
* 3. If the system clock source selected by user fails to startup, the SystemInit()
|
||||
* function will do nothing and HSI still used as system clock source. User can
|
||||
* add some code to deal with this issue inside the SetSysClock() function.
|
||||
*
|
||||
* 4. The default value of HSE crystal is set to 25MHz, refer to "HSE_VALUE" define
|
||||
* in "stm32f4xx.h" file. When HSE is used as system clock source, directly or
|
||||
* through PLL, and you are using different crystal you have to adapt the HSE
|
||||
* value to your own configuration.
|
||||
*
|
||||
* 5. This file configures the system clock as follows:
|
||||
*=============================================================================
|
||||
*=============================================================================
|
||||
* Supported STM32F40xx/41xx/427x/437x devices
|
||||
*-----------------------------------------------------------------------------
|
||||
* System Clock source | PLL (HSE)
|
||||
*-----------------------------------------------------------------------------
|
||||
* SYSCLK(Hz) | 168000000
|
||||
*-----------------------------------------------------------------------------
|
||||
* HCLK(Hz) | 168000000
|
||||
*-----------------------------------------------------------------------------
|
||||
* AHB Prescaler | 1
|
||||
*-----------------------------------------------------------------------------
|
||||
* APB1 Prescaler | 4
|
||||
*-----------------------------------------------------------------------------
|
||||
* APB2 Prescaler | 2
|
||||
*-----------------------------------------------------------------------------
|
||||
* HSE Frequency(Hz) | 12000000
|
||||
*-----------------------------------------------------------------------------
|
||||
* PLL_M | 12
|
||||
*-----------------------------------------------------------------------------
|
||||
* PLL_N | 336
|
||||
*-----------------------------------------------------------------------------
|
||||
* PLL_P | 2
|
||||
*-----------------------------------------------------------------------------
|
||||
* PLL_Q | 7
|
||||
*-----------------------------------------------------------------------------
|
||||
* PLLI2S_N | NA
|
||||
*-----------------------------------------------------------------------------
|
||||
* PLLI2S_R | NA
|
||||
*-----------------------------------------------------------------------------
|
||||
* I2S input clock | NA
|
||||
*-----------------------------------------------------------------------------
|
||||
* VDD(V) | 3.3
|
||||
*-----------------------------------------------------------------------------
|
||||
* Main regulator output voltage | Scale1 mode
|
||||
*-----------------------------------------------------------------------------
|
||||
* Flash Latency(WS) | 5
|
||||
*-----------------------------------------------------------------------------
|
||||
* Prefetch Buffer | ON
|
||||
*-----------------------------------------------------------------------------
|
||||
* Instruction cache | ON
|
||||
*-----------------------------------------------------------------------------
|
||||
* Data cache | ON
|
||||
*-----------------------------------------------------------------------------
|
||||
* Require 48MHz for USB OTG FS, | Enabled
|
||||
* SDIO and RNG clock |
|
||||
*-----------------------------------------------------------------------------
|
||||
*=============================================================================
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2013 STMicroelectronics</center></h2>
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
* You may not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at:
|
||||
*
|
||||
* http://www.st.com/software_license_agreement_liberty_v2
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
@@ -120,9 +44,16 @@
|
||||
* @{
|
||||
*/
|
||||
|
||||
#include "thirdparty/CMSIS/Device/ST/STM32F4xx/Include/stm32f4xx.h"
|
||||
#include "stm32_hal.h"
|
||||
#include "stm32_hal_ll.h"
|
||||
|
||||
#include "stm32f4xx.h"
|
||||
|
||||
#if !defined (HSE_VALUE)
|
||||
#define HSE_VALUE ((uint32_t)25000000) /*!< Default value of the External oscillator in Hz */
|
||||
#endif /* HSE_VALUE */
|
||||
|
||||
#if !defined (HSI_VALUE)
|
||||
#define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
|
||||
#endif /* HSI_VALUE */
|
||||
|
||||
/**
|
||||
* @}
|
||||
@@ -141,39 +72,43 @@
|
||||
*/
|
||||
|
||||
/************************* Miscellaneous Configuration ************************/
|
||||
/*!< Uncomment the following line if you need to use external SRAM mounted
|
||||
on STM324xG_EVAL/STM324x7I_EVAL board as data memory */
|
||||
/*!< Uncomment the following line if you need to use external SRAM or SDRAM as data memory */
|
||||
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)\
|
||||
|| defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
|
||||
|| defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx)
|
||||
/* #define DATA_IN_ExtSRAM */
|
||||
#endif /* STM32F40xxx || STM32F41xxx || STM32F42xxx || STM32F43xxx || STM32F469xx || STM32F479xx ||\
|
||||
STM32F412Zx || STM32F412Vx */
|
||||
|
||||
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
|
||||
|| defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
|
||||
/* #define DATA_IN_ExtSDRAM */
|
||||
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx ||\
|
||||
STM32F479xx */
|
||||
|
||||
/*!< Uncomment the following line if you need to relocate your vector Table in
|
||||
Internal SRAM. */
|
||||
/* Note: Following vector table addresses must be defined in line with linker
|
||||
configuration. */
|
||||
/*!< Uncomment the following line if you need to relocate the vector table
|
||||
anywhere in Flash or Sram, else the vector table is kept at the automatic
|
||||
remap of boot address selected */
|
||||
/* #define USER_VECT_TAB_ADDRESS */
|
||||
|
||||
#if defined(USER_VECT_TAB_ADDRESS)
|
||||
/*!< Uncomment the following line if you need to relocate your vector Table
|
||||
in Sram else user remap will be done in Flash. */
|
||||
/* #define VECT_TAB_SRAM */
|
||||
#define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field.
|
||||
This value must be a multiple of 0x200. */
|
||||
/******************************************************************************/
|
||||
|
||||
/************************* PLL Parameters *************************************/
|
||||
#if defined(STM32F413xx)
|
||||
/* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N */
|
||||
#define PLL_M 12
|
||||
#define PLL_N 200
|
||||
|
||||
/* SYSCLK = PLL_VCO / PLL_P */
|
||||
#define PLL_P 2
|
||||
|
||||
/* USB OTG FS, SDIO and RNG Clock = PLL_VCO / PLLQ */
|
||||
#define PLL_Q 2
|
||||
#if defined(VECT_TAB_SRAM)
|
||||
#define VECT_TAB_BASE_ADDRESS SRAM_BASE /*!< Vector Table base address field.
|
||||
This value must be a multiple of 0x200. */
|
||||
#else
|
||||
/* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N */
|
||||
#define PLL_M 12
|
||||
#define PLL_N 336
|
||||
|
||||
/* SYSCLK = PLL_VCO / PLL_P */
|
||||
#define PLL_P 2
|
||||
|
||||
/* USB OTG FS, SDIO and RNG Clock = PLL_VCO / PLLQ */
|
||||
#define PLL_Q 7
|
||||
#endif
|
||||
#define VECT_TAB_BASE_ADDRESS FLASH_BASE /*!< Vector Table base address field.
|
||||
This value must be a multiple of 0x200. */
|
||||
#endif /* VECT_TAB_SRAM */
|
||||
#if !defined(VECT_TAB_OFFSET)
|
||||
#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table offset field.
|
||||
This value must be a multiple of 0x200. */
|
||||
#endif /* VECT_TAB_OFFSET */
|
||||
#endif /* USER_VECT_TAB_ADDRESS */
|
||||
/******************************************************************************/
|
||||
|
||||
/**
|
||||
@@ -191,15 +126,17 @@
|
||||
/** @addtogroup STM32F4xx_System_Private_Variables
|
||||
* @{
|
||||
*/
|
||||
#if defined(STM32F413xx)
|
||||
uint32_t SystemCoreClock = 100000000;
|
||||
#else
|
||||
uint32_t SystemCoreClock = 168000000;
|
||||
#endif
|
||||
|
||||
const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
|
||||
const uint8_t APBPrescTable[8] = {0, 0, 0, 0, 1, 2, 3, 4};
|
||||
|
||||
/* This variable is updated in three ways:
|
||||
1) by calling CMSIS function SystemCoreClockUpdate()
|
||||
2) by calling HAL API function HAL_RCC_GetHCLKFreq()
|
||||
3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
|
||||
Note: If you use this function to configure the system clock; then there
|
||||
is no need to call the 2 first functions listed above, since SystemCoreClock
|
||||
variable is updated automatically.
|
||||
*/
|
||||
uint32_t SystemCoreClock = 16000000;
|
||||
const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
|
||||
const uint8_t APBPrescTable[8] = {0, 0, 0, 0, 1, 2, 3, 4};
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
@@ -208,10 +145,9 @@
|
||||
* @{
|
||||
*/
|
||||
|
||||
static void SetSysClock(void);
|
||||
#ifdef DATA_IN_ExtSRAM
|
||||
#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
|
||||
static void SystemInit_ExtMemCtl(void);
|
||||
#endif /* DATA_IN_ExtSRAM */
|
||||
#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
|
||||
|
||||
/**
|
||||
* @}
|
||||
@@ -223,62 +159,26 @@ static void SetSysClock(void);
|
||||
|
||||
/**
|
||||
* @brief Setup the microcontroller system
|
||||
* Initialize the Embedded Flash Interface, the PLL and update the
|
||||
* SystemFrequency variable.
|
||||
* Initialize the FPU setting, vector table location and External memory
|
||||
* configuration.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SystemInit(void)
|
||||
{
|
||||
#if defined(PCBFLYSKY)
|
||||
extern void backlightLowInit( void );
|
||||
backlightLowInit();
|
||||
#endif
|
||||
/* FPU settings ------------------------------------------------------------*/
|
||||
#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
|
||||
SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2)); /* set CP10 and CP11 Full Access */
|
||||
#endif
|
||||
/* Reset the RCC clock configuration to the default reset state ------------*/
|
||||
/* Set HSION bit */
|
||||
RCC->CR |= (uint32_t)0x00000001;
|
||||
|
||||
/* Reset CFGR register */
|
||||
RCC->CFGR = 0x00000000;
|
||||
|
||||
/* Reset HSEON, CSSON and PLLON bits */
|
||||
RCC->CR &= (uint32_t)0xFEF6FFFF;
|
||||
|
||||
/* Reset PLLCFGR register */
|
||||
RCC->PLLCFGR = 0x24003010;
|
||||
|
||||
/* Reset HSEBYP bit */
|
||||
RCC->CR &= (uint32_t)0xFFFBFFFF;
|
||||
|
||||
/* Disable all interrupts */
|
||||
RCC->CIR = 0x00000000;
|
||||
|
||||
#if defined(SDRAM)
|
||||
void SDRAM_Init();
|
||||
|
||||
SDRAM_Init(); // calls SDRAM_GPIOConfig()
|
||||
#endif
|
||||
|
||||
#ifdef DATA_IN_ExtSRAM
|
||||
#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
|
||||
SystemInit_ExtMemCtl();
|
||||
#endif /* DATA_IN_ExtSRAM */
|
||||
|
||||
/* Configure the System clock source, PLL Multiplier and Divider factors,
|
||||
AHB/APBx prescalers and Flash settings ----------------------------------*/
|
||||
SetSysClock();
|
||||
#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
|
||||
|
||||
/* Configure the Vector Table location add offset address ------------------*/
|
||||
#ifdef VECT_TAB_SRAM
|
||||
SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
|
||||
#else
|
||||
// SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
|
||||
extern uint32_t g_pfnVectors ;
|
||||
SCB->VTOR = (uint32_t) &g_pfnVectors ; /* Vector Table Relocation in Internal FLASH */
|
||||
#endif
|
||||
/* Configure the Vector Table location -------------------------------------*/
|
||||
#if defined(USER_VECT_TAB_ADDRESS)
|
||||
SCB->VTOR = VECT_TAB_BASE_ADDRESS | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
|
||||
#endif /* USER_VECT_TAB_ADDRESS */
|
||||
}
|
||||
|
||||
/**
|
||||
@@ -302,14 +202,14 @@ void SystemInit(void)
|
||||
* - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
|
||||
* or HSI_VALUE(*) multiplied/divided by the PLL factors.
|
||||
*
|
||||
* (*) HSI_VALUE is a constant defined in stm32f4xx.h file (default value
|
||||
* (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value
|
||||
* 16 MHz) but the real value may vary depending on the variations
|
||||
* in voltage and temperature.
|
||||
*
|
||||
* (**) HSE_VALUE is a constant defined in stm32f4xx.h file (default value
|
||||
* 25 MHz), user has to ensure that HSE_VALUE is same as the real
|
||||
* frequency of the crystal used. Otherwise, this function may
|
||||
* have wrong result.
|
||||
* (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (its value
|
||||
* depends on the application requirements), user has to ensure that HSE_VALUE
|
||||
* is same as the real frequency of the crystal used. Otherwise, this function
|
||||
* may have wrong result.
|
||||
*
|
||||
* - The result of this function could be not correct when using fractional
|
||||
* value for HSE crystal.
|
||||
@@ -348,7 +248,7 @@ void SystemCoreClockUpdate(void)
|
||||
else
|
||||
{
|
||||
/* HSI used as PLL clock source */
|
||||
pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
|
||||
pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
|
||||
}
|
||||
|
||||
pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2;
|
||||
@@ -365,215 +265,478 @@ void SystemCoreClockUpdate(void)
|
||||
SystemCoreClock >>= tmp;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Configures the System clock source, PLL Multiplier and Divider factors,
|
||||
* AHB/APBx prescalers and Flash settings
|
||||
* @Note This function should be called only once the RCC clock configuration
|
||||
* is reset to the default reset state (done in SystemInit() function).
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void SetSysClock(void)
|
||||
{
|
||||
/******************************************************************************/
|
||||
/* PLL (clocked by HSE) used as System clock source */
|
||||
/******************************************************************************/
|
||||
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
|
||||
|
||||
/* Enable HSE */
|
||||
RCC->CR |= ((uint32_t)RCC_CR_HSEON);
|
||||
|
||||
/* Wait till HSE is ready and if Time out is reached exit */
|
||||
do
|
||||
{
|
||||
HSEStatus = RCC->CR & RCC_CR_HSERDY;
|
||||
StartUpCounter++;
|
||||
} while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
|
||||
|
||||
if ((RCC->CR & RCC_CR_HSERDY) != RESET)
|
||||
{
|
||||
HSEStatus = (uint32_t)0x01;
|
||||
}
|
||||
else
|
||||
{
|
||||
HSEStatus = (uint32_t)0x00;
|
||||
}
|
||||
|
||||
if (HSEStatus == (uint32_t)0x01)
|
||||
{
|
||||
/* Select regulator voltage output Scale 1 mode, System frequency up to 168 MHz */
|
||||
RCC->APB1ENR |= RCC_APB1ENR_PWREN;
|
||||
PWR->CR |= PWR_CR_VOS;
|
||||
|
||||
/* HCLK = SYSCLK / 1*/
|
||||
RCC->CFGR |= RCC_CFGR_HPRE_DIV1;
|
||||
|
||||
/* PCLK2 = HCLK / 2*/
|
||||
RCC->CFGR |= RCC_CFGR_PPRE2_DIV2;
|
||||
|
||||
/* PCLK1 = HCLK / 4*/
|
||||
RCC->CFGR |= RCC_CFGR_PPRE1_DIV4;
|
||||
|
||||
/* Configure the main PLL */
|
||||
RCC->PLLCFGR = PLL_M | (PLL_N << 6) | (((PLL_P >> 1) -1) << 16) |
|
||||
(RCC_PLLCFGR_PLLSRC_HSE) | (PLL_Q << 24);
|
||||
|
||||
/* Enable the main PLL */
|
||||
RCC->CR |= RCC_CR_PLLON;
|
||||
|
||||
/* Wait till the main PLL is ready */
|
||||
while((RCC->CR & RCC_CR_PLLRDY) == 0)
|
||||
{
|
||||
}
|
||||
|
||||
/* Configure Flash prefetch, Instruction cache, Data cache and wait state */
|
||||
FLASH->ACR = FLASH_ACR_PRFTEN | FLASH_ACR_ICEN | FLASH_ACR_DCEN | FLASH_ACR_LATENCY_5WS;
|
||||
|
||||
/* Select the main PLL as system clock source */
|
||||
RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
|
||||
RCC->CFGR |= RCC_CFGR_SW_PLL;
|
||||
|
||||
/* Wait till the main PLL is used as system clock source */
|
||||
while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS ) != RCC_CFGR_SWS_PLL)
|
||||
{
|
||||
}
|
||||
}
|
||||
else
|
||||
{ /* If HSE fails to start-up, the application will have wrong clock
|
||||
configuration. User can add here some code to deal with this error */
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Setup the external memory controller. Called in startup_stm32f4xx.s
|
||||
* before jump to __main
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
#ifdef DATA_IN_ExtSRAM
|
||||
#if defined (DATA_IN_ExtSRAM) && defined (DATA_IN_ExtSDRAM)
|
||||
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
|
||||
|| defined(STM32F469xx) || defined(STM32F479xx)
|
||||
/**
|
||||
* @brief Setup the external memory controller.
|
||||
* Called in startup_stm32f4xx.s before jump to main.
|
||||
* This function configures the external SRAM mounted on STM324xG_EVAL/STM324x7I_EVAL board
|
||||
* This SRAM will be used as program data memory (including heap and stack).
|
||||
* This function configures the external memories (SRAM/SDRAM)
|
||||
* This SRAM/SDRAM will be used as program data memory (including heap and stack).
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SystemInit_ExtMemCtl(void)
|
||||
{
|
||||
/*-- GPIOs Configuration -----------------------------------------------------*/
|
||||
/*
|
||||
+-------------------+--------------------+------------------+------------------+
|
||||
+ SRAM pins assignment +
|
||||
+-------------------+--------------------+------------------+------------------+
|
||||
| PD0 <-> FSMC_D2 | PE0 <-> FSMC_NBL0 | PF0 <-> FSMC_A0 | PG0 <-> FSMC_A10 |
|
||||
| PD1 <-> FSMC_D3 | PE1 <-> FSMC_NBL1 | PF1 <-> FSMC_A1 | PG1 <-> FSMC_A11 |
|
||||
| PD4 <-> FSMC_NOE | PE2 <-> FSMC_A23 | PF2 <-> FSMC_A2 | PG2 <-> FSMC_A12 |
|
||||
| PD5 <-> FSMC_NWE | PE3 <-> FSMC_A19 | PF3 <-> FSMC_A3 | PG3 <-> FSMC_A13 |
|
||||
| PD8 <-> FSMC_D13 | PE4 <-> FSMC_A20 | PF4 <-> FSMC_A4 | PG4 <-> FSMC_A14 |
|
||||
| PD9 <-> FSMC_D14 | PE5 <-> FSMC_A21 | PF5 <-> FSMC_A5 | PG5 <-> FSMC_A15 |
|
||||
| PD10 <-> FSMC_D15 | PE6 <-> FSMC_A22 | PF12 <-> FSMC_A6 | PG9 <-> FSMC_NE2 |
|
||||
| PD11 <-> FSMC_A16 | PE7 <-> FSMC_D4 | PF13 <-> FSMC_A7 |------------------+
|
||||
| PD12 <-> FSMC_A17 | PE8 <-> FSMC_D5 | PF14 <-> FSMC_A8 |
|
||||
| PD13 <-> FSMC_A18 | PE9 <-> FSMC_D6 | PF15 <-> FSMC_A9 |
|
||||
| PD14 <-> FSMC_D0 | PE10 <-> FSMC_D7 |------------------+
|
||||
| PD15 <-> FSMC_D1 | PE11 <-> FSMC_D8 |
|
||||
+-------------------| PE12 <-> FSMC_D9 |
|
||||
| PE13 <-> FSMC_D10 |
|
||||
| PE14 <-> FSMC_D11 |
|
||||
| PE15 <-> FSMC_D12 |
|
||||
+--------------------+
|
||||
*/
|
||||
/* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */
|
||||
RCC->AHB1ENR |= 0x00000078;
|
||||
__IO uint32_t tmp = 0x00;
|
||||
|
||||
register uint32_t tmpreg = 0, timeout = 0xFFFF;
|
||||
register __IO uint32_t index;
|
||||
|
||||
/* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface clock */
|
||||
RCC->AHB1ENR |= 0x000001F8;
|
||||
|
||||
/* Delay after an RCC peripheral clock enabling */
|
||||
tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);
|
||||
|
||||
/* Connect PDx pins to FSMC Alternate function */
|
||||
GPIOD->AFR[0] = 0x00cc00cc;
|
||||
GPIOD->AFR[1] = 0xcccccccc;
|
||||
/* Connect PDx pins to FMC Alternate function */
|
||||
GPIOD->AFR[0] = 0x00CCC0CC;
|
||||
GPIOD->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PDx pins in Alternate function mode */
|
||||
GPIOD->MODER = 0xaaaa0a0a;
|
||||
GPIOD->MODER = 0xAAAA0A8A;
|
||||
/* Configure PDx pins speed to 100 MHz */
|
||||
GPIOD->OSPEEDR = 0xffff0f0f;
|
||||
GPIOD->OSPEEDR = 0xFFFF0FCF;
|
||||
/* Configure PDx pins Output type to push-pull */
|
||||
GPIOD->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PDx pins */
|
||||
GPIOD->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PEx pins to FSMC Alternate function */
|
||||
GPIOE->AFR[0] = 0xcccccccc;
|
||||
GPIOE->AFR[1] = 0xcccccccc;
|
||||
/* Connect PEx pins to FMC Alternate function */
|
||||
GPIOE->AFR[0] = 0xC00CC0CC;
|
||||
GPIOE->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PEx pins in Alternate function mode */
|
||||
GPIOE->MODER = 0xaaaaaaaa;
|
||||
GPIOE->MODER = 0xAAAA828A;
|
||||
/* Configure PEx pins speed to 100 MHz */
|
||||
GPIOE->OSPEEDR = 0xffffffff;
|
||||
GPIOE->OSPEEDR = 0xFFFFC3CF;
|
||||
/* Configure PEx pins Output type to push-pull */
|
||||
GPIOE->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PEx pins */
|
||||
GPIOE->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PFx pins to FSMC Alternate function */
|
||||
GPIOF->AFR[0] = 0x00cccccc;
|
||||
GPIOF->AFR[1] = 0xcccc0000;
|
||||
|
||||
/* Connect PFx pins to FMC Alternate function */
|
||||
GPIOF->AFR[0] = 0xCCCCCCCC;
|
||||
GPIOF->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PFx pins in Alternate function mode */
|
||||
GPIOF->MODER = 0xaa000aaa;
|
||||
/* Configure PFx pins speed to 100 MHz */
|
||||
GPIOF->OSPEEDR = 0xff000fff;
|
||||
GPIOF->MODER = 0xAA800AAA;
|
||||
/* Configure PFx pins speed to 50 MHz */
|
||||
GPIOF->OSPEEDR = 0xAA800AAA;
|
||||
/* Configure PFx pins Output type to push-pull */
|
||||
GPIOF->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PFx pins */
|
||||
GPIOF->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PGx pins to FSMC Alternate function */
|
||||
GPIOG->AFR[0] = 0x00cccccc;
|
||||
GPIOG->AFR[1] = 0x000000c0;
|
||||
/* Connect PGx pins to FMC Alternate function */
|
||||
GPIOG->AFR[0] = 0xCCCCCCCC;
|
||||
GPIOG->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PGx pins in Alternate function mode */
|
||||
GPIOG->MODER = 0x00080aaa;
|
||||
/* Configure PGx pins speed to 100 MHz */
|
||||
GPIOG->OSPEEDR = 0x000c0fff;
|
||||
GPIOG->MODER = 0xAAAAAAAA;
|
||||
/* Configure PGx pins speed to 50 MHz */
|
||||
GPIOG->OSPEEDR = 0xAAAAAAAA;
|
||||
/* Configure PGx pins Output type to push-pull */
|
||||
GPIOG->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PGx pins */
|
||||
GPIOG->PUPDR = 0x00000000;
|
||||
|
||||
/*-- FSMC Configuration ------------------------------------------------------*/
|
||||
/* Enable the FSMC interface clock */
|
||||
/* Connect PHx pins to FMC Alternate function */
|
||||
GPIOH->AFR[0] = 0x00C0CC00;
|
||||
GPIOH->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PHx pins in Alternate function mode */
|
||||
GPIOH->MODER = 0xAAAA08A0;
|
||||
/* Configure PHx pins speed to 50 MHz */
|
||||
GPIOH->OSPEEDR = 0xAAAA08A0;
|
||||
/* Configure PHx pins Output type to push-pull */
|
||||
GPIOH->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PHx pins */
|
||||
GPIOH->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PIx pins to FMC Alternate function */
|
||||
GPIOI->AFR[0] = 0xCCCCCCCC;
|
||||
GPIOI->AFR[1] = 0x00000CC0;
|
||||
/* Configure PIx pins in Alternate function mode */
|
||||
GPIOI->MODER = 0x0028AAAA;
|
||||
/* Configure PIx pins speed to 50 MHz */
|
||||
GPIOI->OSPEEDR = 0x0028AAAA;
|
||||
/* Configure PIx pins Output type to push-pull */
|
||||
GPIOI->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PIx pins */
|
||||
GPIOI->PUPDR = 0x00000000;
|
||||
|
||||
/*-- FMC Configuration -------------------------------------------------------*/
|
||||
/* Enable the FMC interface clock */
|
||||
RCC->AHB3ENR |= 0x00000001;
|
||||
/* Delay after an RCC peripheral clock enabling */
|
||||
tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
|
||||
|
||||
FMC_Bank5_6->SDCR[0] = 0x000019E4;
|
||||
FMC_Bank5_6->SDTR[0] = 0x01115351;
|
||||
|
||||
/* SDRAM initialization sequence */
|
||||
/* Clock enable command */
|
||||
FMC_Bank5_6->SDCMR = 0x00000011;
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
while((tmpreg != 0) && (timeout-- > 0))
|
||||
{
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
}
|
||||
|
||||
/* Delay */
|
||||
for (index = 0; index<1000; index++);
|
||||
|
||||
/* PALL command */
|
||||
FMC_Bank5_6->SDCMR = 0x00000012;
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
timeout = 0xFFFF;
|
||||
while((tmpreg != 0) && (timeout-- > 0))
|
||||
{
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
}
|
||||
|
||||
/* Auto refresh command */
|
||||
FMC_Bank5_6->SDCMR = 0x00000073;
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
timeout = 0xFFFF;
|
||||
while((tmpreg != 0) && (timeout-- > 0))
|
||||
{
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
}
|
||||
|
||||
/* MRD register program */
|
||||
FMC_Bank5_6->SDCMR = 0x00046014;
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
timeout = 0xFFFF;
|
||||
while((tmpreg != 0) && (timeout-- > 0))
|
||||
{
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
}
|
||||
|
||||
/* Set refresh count */
|
||||
tmpreg = FMC_Bank5_6->SDRTR;
|
||||
FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1));
|
||||
|
||||
/* Disable write protection */
|
||||
tmpreg = FMC_Bank5_6->SDCR[0];
|
||||
FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF);
|
||||
|
||||
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
|
||||
/* Configure and enable Bank1_SRAM2 */
|
||||
FMC_Bank1->BTCR[2] = 0x00001011;
|
||||
FMC_Bank1->BTCR[3] = 0x00000201;
|
||||
FMC_Bank1E->BWTR[2] = 0x0fffffff;
|
||||
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
|
||||
#if defined(STM32F469xx) || defined(STM32F479xx)
|
||||
/* Configure and enable Bank1_SRAM2 */
|
||||
FMC_Bank1->BTCR[2] = 0x00001091;
|
||||
FMC_Bank1->BTCR[3] = 0x00110212;
|
||||
FMC_Bank1E->BWTR[2] = 0x0fffffff;
|
||||
#endif /* STM32F469xx || STM32F479xx */
|
||||
|
||||
(void)(tmp);
|
||||
}
|
||||
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
|
||||
#elif defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
|
||||
/**
|
||||
* @brief Setup the external memory controller.
|
||||
* Called in startup_stm32f4xx.s before jump to main.
|
||||
* This function configures the external memories (SRAM/SDRAM)
|
||||
* This SRAM/SDRAM will be used as program data memory (including heap and stack).
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SystemInit_ExtMemCtl(void)
|
||||
{
|
||||
__IO uint32_t tmp = 0x00;
|
||||
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
|
||||
|| defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
|
||||
#if defined (DATA_IN_ExtSDRAM)
|
||||
register uint32_t tmpreg = 0, timeout = 0xFFFF;
|
||||
register __IO uint32_t index;
|
||||
|
||||
#if defined(STM32F446xx)
|
||||
/* Enable GPIOA, GPIOC, GPIOD, GPIOE, GPIOF, GPIOG interface
|
||||
clock */
|
||||
RCC->AHB1ENR |= 0x0000007D;
|
||||
#else
|
||||
/* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface
|
||||
clock */
|
||||
RCC->AHB1ENR |= 0x000001F8;
|
||||
#endif /* STM32F446xx */
|
||||
/* Delay after an RCC peripheral clock enabling */
|
||||
tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);
|
||||
|
||||
#if defined(STM32F446xx)
|
||||
/* Connect PAx pins to FMC Alternate function */
|
||||
GPIOA->AFR[0] |= 0xC0000000;
|
||||
GPIOA->AFR[1] |= 0x00000000;
|
||||
/* Configure PDx pins in Alternate function mode */
|
||||
GPIOA->MODER |= 0x00008000;
|
||||
/* Configure PDx pins speed to 50 MHz */
|
||||
GPIOA->OSPEEDR |= 0x00008000;
|
||||
/* Configure PDx pins Output type to push-pull */
|
||||
GPIOA->OTYPER |= 0x00000000;
|
||||
/* No pull-up, pull-down for PDx pins */
|
||||
GPIOA->PUPDR |= 0x00000000;
|
||||
|
||||
/* Connect PCx pins to FMC Alternate function */
|
||||
GPIOC->AFR[0] |= 0x00CC0000;
|
||||
GPIOC->AFR[1] |= 0x00000000;
|
||||
/* Configure PDx pins in Alternate function mode */
|
||||
GPIOC->MODER |= 0x00000A00;
|
||||
/* Configure PDx pins speed to 50 MHz */
|
||||
GPIOC->OSPEEDR |= 0x00000A00;
|
||||
/* Configure PDx pins Output type to push-pull */
|
||||
GPIOC->OTYPER |= 0x00000000;
|
||||
/* No pull-up, pull-down for PDx pins */
|
||||
GPIOC->PUPDR |= 0x00000000;
|
||||
#endif /* STM32F446xx */
|
||||
|
||||
/* Connect PDx pins to FMC Alternate function */
|
||||
GPIOD->AFR[0] = 0x000000CC;
|
||||
GPIOD->AFR[1] = 0xCC000CCC;
|
||||
/* Configure PDx pins in Alternate function mode */
|
||||
GPIOD->MODER = 0xA02A000A;
|
||||
/* Configure PDx pins speed to 50 MHz */
|
||||
GPIOD->OSPEEDR = 0xA02A000A;
|
||||
/* Configure PDx pins Output type to push-pull */
|
||||
GPIOD->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PDx pins */
|
||||
GPIOD->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PEx pins to FMC Alternate function */
|
||||
GPIOE->AFR[0] = 0xC00000CC;
|
||||
GPIOE->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PEx pins in Alternate function mode */
|
||||
GPIOE->MODER = 0xAAAA800A;
|
||||
/* Configure PEx pins speed to 50 MHz */
|
||||
GPIOE->OSPEEDR = 0xAAAA800A;
|
||||
/* Configure PEx pins Output type to push-pull */
|
||||
GPIOE->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PEx pins */
|
||||
GPIOE->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PFx pins to FMC Alternate function */
|
||||
GPIOF->AFR[0] = 0xCCCCCCCC;
|
||||
GPIOF->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PFx pins in Alternate function mode */
|
||||
GPIOF->MODER = 0xAA800AAA;
|
||||
/* Configure PFx pins speed to 50 MHz */
|
||||
GPIOF->OSPEEDR = 0xAA800AAA;
|
||||
/* Configure PFx pins Output type to push-pull */
|
||||
GPIOF->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PFx pins */
|
||||
GPIOF->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PGx pins to FMC Alternate function */
|
||||
GPIOG->AFR[0] = 0xCCCCCCCC;
|
||||
GPIOG->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PGx pins in Alternate function mode */
|
||||
GPIOG->MODER = 0xAAAAAAAA;
|
||||
/* Configure PGx pins speed to 50 MHz */
|
||||
GPIOG->OSPEEDR = 0xAAAAAAAA;
|
||||
/* Configure PGx pins Output type to push-pull */
|
||||
GPIOG->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PGx pins */
|
||||
GPIOG->PUPDR = 0x00000000;
|
||||
|
||||
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
|
||||
|| defined(STM32F469xx) || defined(STM32F479xx)
|
||||
/* Connect PHx pins to FMC Alternate function */
|
||||
GPIOH->AFR[0] = 0x00C0CC00;
|
||||
GPIOH->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PHx pins in Alternate function mode */
|
||||
GPIOH->MODER = 0xAAAA08A0;
|
||||
/* Configure PHx pins speed to 50 MHz */
|
||||
GPIOH->OSPEEDR = 0xAAAA08A0;
|
||||
/* Configure PHx pins Output type to push-pull */
|
||||
GPIOH->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PHx pins */
|
||||
GPIOH->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PIx pins to FMC Alternate function */
|
||||
GPIOI->AFR[0] = 0xCCCCCCCC;
|
||||
GPIOI->AFR[1] = 0x00000CC0;
|
||||
/* Configure PIx pins in Alternate function mode */
|
||||
GPIOI->MODER = 0x0028AAAA;
|
||||
/* Configure PIx pins speed to 50 MHz */
|
||||
GPIOI->OSPEEDR = 0x0028AAAA;
|
||||
/* Configure PIx pins Output type to push-pull */
|
||||
GPIOI->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PIx pins */
|
||||
GPIOI->PUPDR = 0x00000000;
|
||||
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
|
||||
|
||||
/*-- FMC Configuration -------------------------------------------------------*/
|
||||
/* Enable the FMC interface clock */
|
||||
RCC->AHB3ENR |= 0x00000001;
|
||||
/* Delay after an RCC peripheral clock enabling */
|
||||
tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
|
||||
|
||||
/* Configure and enable SDRAM bank1 */
|
||||
#if defined(STM32F446xx)
|
||||
FMC_Bank5_6->SDCR[0] = 0x00001954;
|
||||
#else
|
||||
FMC_Bank5_6->SDCR[0] = 0x000019E4;
|
||||
#endif /* STM32F446xx */
|
||||
FMC_Bank5_6->SDTR[0] = 0x01115351;
|
||||
|
||||
/* SDRAM initialization sequence */
|
||||
/* Clock enable command */
|
||||
FMC_Bank5_6->SDCMR = 0x00000011;
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
while((tmpreg != 0) && (timeout-- > 0))
|
||||
{
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
}
|
||||
|
||||
/* Delay */
|
||||
for (index = 0; index<1000; index++);
|
||||
|
||||
/* PALL command */
|
||||
FMC_Bank5_6->SDCMR = 0x00000012;
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
timeout = 0xFFFF;
|
||||
while((tmpreg != 0) && (timeout-- > 0))
|
||||
{
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
}
|
||||
|
||||
/* Auto refresh command */
|
||||
#if defined(STM32F446xx)
|
||||
FMC_Bank5_6->SDCMR = 0x000000F3;
|
||||
#else
|
||||
FMC_Bank5_6->SDCMR = 0x00000073;
|
||||
#endif /* STM32F446xx */
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
timeout = 0xFFFF;
|
||||
while((tmpreg != 0) && (timeout-- > 0))
|
||||
{
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
}
|
||||
|
||||
/* MRD register program */
|
||||
#if defined(STM32F446xx)
|
||||
FMC_Bank5_6->SDCMR = 0x00044014;
|
||||
#else
|
||||
FMC_Bank5_6->SDCMR = 0x00046014;
|
||||
#endif /* STM32F446xx */
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
timeout = 0xFFFF;
|
||||
while((tmpreg != 0) && (timeout-- > 0))
|
||||
{
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
}
|
||||
|
||||
/* Set refresh count */
|
||||
tmpreg = FMC_Bank5_6->SDRTR;
|
||||
#if defined(STM32F446xx)
|
||||
FMC_Bank5_6->SDRTR = (tmpreg | (0x0000050C<<1));
|
||||
#else
|
||||
FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1));
|
||||
#endif /* STM32F446xx */
|
||||
|
||||
/* Disable write protection */
|
||||
tmpreg = FMC_Bank5_6->SDCR[0];
|
||||
FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF);
|
||||
#endif /* DATA_IN_ExtSDRAM */
|
||||
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
|
||||
|
||||
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)\
|
||||
|| defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
|
||||
|| defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx)
|
||||
|
||||
#if defined(DATA_IN_ExtSRAM)
|
||||
/*-- GPIOs Configuration -----------------------------------------------------*/
|
||||
/* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */
|
||||
RCC->AHB1ENR |= 0x00000078;
|
||||
/* Delay after an RCC peripheral clock enabling */
|
||||
tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);
|
||||
|
||||
/* Connect PDx pins to FMC Alternate function */
|
||||
GPIOD->AFR[0] = 0x00CCC0CC;
|
||||
GPIOD->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PDx pins in Alternate function mode */
|
||||
GPIOD->MODER = 0xAAAA0A8A;
|
||||
/* Configure PDx pins speed to 100 MHz */
|
||||
GPIOD->OSPEEDR = 0xFFFF0FCF;
|
||||
/* Configure PDx pins Output type to push-pull */
|
||||
GPIOD->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PDx pins */
|
||||
GPIOD->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PEx pins to FMC Alternate function */
|
||||
GPIOE->AFR[0] = 0xC00CC0CC;
|
||||
GPIOE->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PEx pins in Alternate function mode */
|
||||
GPIOE->MODER = 0xAAAA828A;
|
||||
/* Configure PEx pins speed to 100 MHz */
|
||||
GPIOE->OSPEEDR = 0xFFFFC3CF;
|
||||
/* Configure PEx pins Output type to push-pull */
|
||||
GPIOE->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PEx pins */
|
||||
GPIOE->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PFx pins to FMC Alternate function */
|
||||
GPIOF->AFR[0] = 0x00CCCCCC;
|
||||
GPIOF->AFR[1] = 0xCCCC0000;
|
||||
/* Configure PFx pins in Alternate function mode */
|
||||
GPIOF->MODER = 0xAA000AAA;
|
||||
/* Configure PFx pins speed to 100 MHz */
|
||||
GPIOF->OSPEEDR = 0xFF000FFF;
|
||||
/* Configure PFx pins Output type to push-pull */
|
||||
GPIOF->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PFx pins */
|
||||
GPIOF->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PGx pins to FMC Alternate function */
|
||||
GPIOG->AFR[0] = 0x00CCCCCC;
|
||||
GPIOG->AFR[1] = 0x000000C0;
|
||||
/* Configure PGx pins in Alternate function mode */
|
||||
GPIOG->MODER = 0x00085AAA;
|
||||
/* Configure PGx pins speed to 100 MHz */
|
||||
GPIOG->OSPEEDR = 0x000CAFFF;
|
||||
/* Configure PGx pins Output type to push-pull */
|
||||
GPIOG->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PGx pins */
|
||||
GPIOG->PUPDR = 0x00000000;
|
||||
|
||||
/*-- FMC/FSMC Configuration --------------------------------------------------*/
|
||||
/* Enable the FMC/FSMC interface clock */
|
||||
RCC->AHB3ENR |= 0x00000001;
|
||||
|
||||
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
|
||||
/* Delay after an RCC peripheral clock enabling */
|
||||
tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
|
||||
/* Configure and enable Bank1_SRAM2 */
|
||||
FMC_Bank1->BTCR[2] = 0x00001011;
|
||||
FMC_Bank1->BTCR[3] = 0x00000201;
|
||||
FMC_Bank1E->BWTR[2] = 0x0fffffff;
|
||||
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
|
||||
#if defined(STM32F469xx) || defined(STM32F479xx)
|
||||
/* Delay after an RCC peripheral clock enabling */
|
||||
tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
|
||||
/* Configure and enable Bank1_SRAM2 */
|
||||
FMC_Bank1->BTCR[2] = 0x00001091;
|
||||
FMC_Bank1->BTCR[3] = 0x00110212;
|
||||
FMC_Bank1E->BWTR[2] = 0x0fffffff;
|
||||
#endif /* STM32F469xx || STM32F479xx */
|
||||
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)\
|
||||
|| defined(STM32F412Zx) || defined(STM32F412Vx)
|
||||
/* Delay after an RCC peripheral clock enabling */
|
||||
tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);
|
||||
/* Configure and enable Bank1_SRAM2 */
|
||||
FSMC_Bank1->BTCR[2] = 0x00001011;
|
||||
FSMC_Bank1->BTCR[3] = 0x00000201;
|
||||
FSMC_Bank1E->BWTR[2] = 0x0fffffff;
|
||||
/*
|
||||
Bank1_SRAM2 is configured as follow:
|
||||
FSMC_Bank1E->BWTR[2] = 0x0FFFFFFF;
|
||||
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F412Zx || STM32F412Vx */
|
||||
|
||||
p.FSMC_AddressSetupTime = 1;
|
||||
p.FSMC_AddressHoldTime = 0;
|
||||
p.FSMC_DataSetupTime = 2;
|
||||
p.FSMC_BusTurnAroundDuration = 0;
|
||||
p.FSMC_CLKDivision = 0;
|
||||
p.FSMC_DataLatency = 0;
|
||||
p.FSMC_AccessMode = FSMC_AccessMode_A;
|
||||
|
||||
FSMC_NORSRAMInitStructure.FSMC_Bank = FSMC_Bank1_NORSRAM2;
|
||||
FSMC_NORSRAMInitStructure.FSMC_DataAddressMux = FSMC_DataAddressMux_Disable;
|
||||
FSMC_NORSRAMInitStructure.FSMC_MemoryType = FSMC_MemoryType_SRAM;
|
||||
FSMC_NORSRAMInitStructure.FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_16b;
|
||||
FSMC_NORSRAMInitStructure.FSMC_BurstAccessMode = FSMC_BurstAccessMode_Disable;
|
||||
FSMC_NORSRAMInitStructure.FSMC_AsynchronousWait = FSMC_AsynchronousWait_Disable;
|
||||
FSMC_NORSRAMInitStructure.FSMC_WaitSignalPolarity = FSMC_WaitSignalPolarity_Low;
|
||||
FSMC_NORSRAMInitStructure.FSMC_WrapMode = FSMC_WrapMode_Disable;
|
||||
FSMC_NORSRAMInitStructure.FSMC_WaitSignalActive = FSMC_WaitSignalActive_BeforeWaitState;
|
||||
FSMC_NORSRAMInitStructure.FSMC_WriteOperation = FSMC_WriteOperation_Enable;
|
||||
FSMC_NORSRAMInitStructure.FSMC_WaitSignal = FSMC_WaitSignal_Disable;
|
||||
FSMC_NORSRAMInitStructure.FSMC_ExtendedMode = FSMC_ExtendedMode_Disable;
|
||||
FSMC_NORSRAMInitStructure.FSMC_WriteBurst = FSMC_WriteBurst_Disable;
|
||||
FSMC_NORSRAMInitStructure.FSMC_ReadWriteTimingStruct = &p;
|
||||
FSMC_NORSRAMInitStructure.FSMC_WriteTimingStruct = &p;
|
||||
*/
|
||||
}
|
||||
#endif /* DATA_IN_ExtSRAM */
|
||||
|
||||
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\
|
||||
STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx */
|
||||
(void)(tmp);
|
||||
}
|
||||
#endif /* DATA_IN_ExtSRAM && DATA_IN_ExtSDRAM */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
@@ -582,9 +745,3 @@ void SystemInit_ExtMemCtl(void)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
||||
|
||||
@@ -0,0 +1,200 @@
|
||||
|
||||
#include "stm32f407xx.h"
|
||||
#include "cortex_m_isr.h"
|
||||
|
||||
void Default_Handler() { default_isr_handler(); }
|
||||
|
||||
/* stm32f407xx specific interrupt vectors */
|
||||
WEAK_DEFAULT void Reset_Handler();
|
||||
WEAK_DEFAULT void NMI_Handler();
|
||||
WEAK_DEFAULT void HardFault_Handler();
|
||||
WEAK_DEFAULT void MemManage_Handler();
|
||||
WEAK_DEFAULT void BusFault_Handler();
|
||||
WEAK_DEFAULT void UsageFault_Handler();
|
||||
WEAK_DEFAULT void SVC_Handler();
|
||||
WEAK_DEFAULT void DebugMon_Handler();
|
||||
WEAK_DEFAULT void PendSV_Handler();
|
||||
WEAK_DEFAULT void SysTick_Handler();
|
||||
WEAK_DEFAULT void WWDG_IRQHandler();
|
||||
WEAK_DEFAULT void PVD_IRQHandler();
|
||||
WEAK_DEFAULT void TAMP_STAMP_IRQHandler();
|
||||
WEAK_DEFAULT void RTC_WKUP_IRQHandler();
|
||||
WEAK_DEFAULT void FLASH_IRQHandler();
|
||||
WEAK_DEFAULT void RCC_IRQHandler();
|
||||
WEAK_DEFAULT void EXTI0_IRQHandler();
|
||||
WEAK_DEFAULT void EXTI1_IRQHandler();
|
||||
WEAK_DEFAULT void EXTI2_IRQHandler();
|
||||
WEAK_DEFAULT void EXTI3_IRQHandler();
|
||||
WEAK_DEFAULT void EXTI4_IRQHandler();
|
||||
WEAK_DEFAULT void DMA1_Stream0_IRQHandler();
|
||||
WEAK_DEFAULT void DMA1_Stream1_IRQHandler();
|
||||
WEAK_DEFAULT void DMA1_Stream2_IRQHandler();
|
||||
WEAK_DEFAULT void DMA1_Stream3_IRQHandler();
|
||||
WEAK_DEFAULT void DMA1_Stream4_IRQHandler();
|
||||
WEAK_DEFAULT void DMA1_Stream5_IRQHandler();
|
||||
WEAK_DEFAULT void DMA1_Stream6_IRQHandler();
|
||||
WEAK_DEFAULT void ADC_IRQHandler();
|
||||
WEAK_DEFAULT void CAN1_TX_IRQHandler();
|
||||
WEAK_DEFAULT void CAN1_RX0_IRQHandler();
|
||||
WEAK_DEFAULT void CAN1_RX1_IRQHandler();
|
||||
WEAK_DEFAULT void CAN1_SCE_IRQHandler();
|
||||
WEAK_DEFAULT void EXTI9_5_IRQHandler();
|
||||
WEAK_DEFAULT void TIM1_BRK_TIM9_IRQHandler();
|
||||
WEAK_DEFAULT void TIM1_UP_TIM10_IRQHandler();
|
||||
WEAK_DEFAULT void TIM1_TRG_COM_TIM11_IRQHandler();
|
||||
WEAK_DEFAULT void TIM1_CC_IRQHandler();
|
||||
WEAK_DEFAULT void TIM2_IRQHandler();
|
||||
WEAK_DEFAULT void TIM3_IRQHandler();
|
||||
WEAK_DEFAULT void TIM4_IRQHandler();
|
||||
WEAK_DEFAULT void I2C1_EV_IRQHandler();
|
||||
WEAK_DEFAULT void I2C1_ER_IRQHandler();
|
||||
WEAK_DEFAULT void I2C2_EV_IRQHandler();
|
||||
WEAK_DEFAULT void I2C2_ER_IRQHandler();
|
||||
WEAK_DEFAULT void SPI1_IRQHandler();
|
||||
WEAK_DEFAULT void SPI2_IRQHandler();
|
||||
WEAK_DEFAULT void USART1_IRQHandler();
|
||||
WEAK_DEFAULT void USART2_IRQHandler();
|
||||
WEAK_DEFAULT void USART3_IRQHandler();
|
||||
WEAK_DEFAULT void EXTI15_10_IRQHandler();
|
||||
WEAK_DEFAULT void RTC_Alarm_IRQHandler();
|
||||
WEAK_DEFAULT void OTG_FS_WKUP_IRQHandler();
|
||||
WEAK_DEFAULT void TIM8_BRK_TIM12_IRQHandler();
|
||||
WEAK_DEFAULT void TIM8_UP_TIM13_IRQHandler();
|
||||
WEAK_DEFAULT void TIM8_TRG_COM_TIM14_IRQHandler();
|
||||
WEAK_DEFAULT void TIM8_CC_IRQHandler();
|
||||
WEAK_DEFAULT void DMA1_Stream7_IRQHandler();
|
||||
WEAK_DEFAULT void FSMC_IRQHandler();
|
||||
WEAK_DEFAULT void SDIO_IRQHandler();
|
||||
WEAK_DEFAULT void TIM5_IRQHandler();
|
||||
WEAK_DEFAULT void SPI3_IRQHandler();
|
||||
WEAK_DEFAULT void UART4_IRQHandler();
|
||||
WEAK_DEFAULT void UART5_IRQHandler();
|
||||
WEAK_DEFAULT void TIM6_DAC_IRQHandler();
|
||||
WEAK_DEFAULT void TIM7_IRQHandler();
|
||||
WEAK_DEFAULT void DMA2_Stream0_IRQHandler();
|
||||
WEAK_DEFAULT void DMA2_Stream1_IRQHandler();
|
||||
WEAK_DEFAULT void DMA2_Stream2_IRQHandler();
|
||||
WEAK_DEFAULT void DMA2_Stream3_IRQHandler();
|
||||
WEAK_DEFAULT void DMA2_Stream4_IRQHandler();
|
||||
WEAK_DEFAULT void ETH_IRQHandler();
|
||||
WEAK_DEFAULT void ETH_WKUP_IRQHandler();
|
||||
WEAK_DEFAULT void CAN2_TX_IRQHandler();
|
||||
WEAK_DEFAULT void CAN2_RX0_IRQHandler();
|
||||
WEAK_DEFAULT void CAN2_RX1_IRQHandler();
|
||||
WEAK_DEFAULT void CAN2_SCE_IRQHandler();
|
||||
WEAK_DEFAULT void OTG_FS_IRQHandler();
|
||||
WEAK_DEFAULT void DMA2_Stream5_IRQHandler();
|
||||
WEAK_DEFAULT void DMA2_Stream6_IRQHandler();
|
||||
WEAK_DEFAULT void DMA2_Stream7_IRQHandler();
|
||||
WEAK_DEFAULT void USART6_IRQHandler();
|
||||
WEAK_DEFAULT void I2C3_EV_IRQHandler();
|
||||
WEAK_DEFAULT void I2C3_ER_IRQHandler();
|
||||
WEAK_DEFAULT void OTG_HS_EP1_OUT_IRQHandler();
|
||||
WEAK_DEFAULT void OTG_HS_EP1_IN_IRQHandler();
|
||||
WEAK_DEFAULT void OTG_HS_WKUP_IRQHandler();
|
||||
WEAK_DEFAULT void OTG_HS_IRQHandler();
|
||||
WEAK_DEFAULT void DCMI_IRQHandler();
|
||||
WEAK_DEFAULT void RNG_IRQHandler();
|
||||
WEAK_DEFAULT void FPU_IRQHandler();
|
||||
|
||||
/* CPU specific interrupt vector table */
|
||||
const isr_t _isr_vector[] ISR_VECTOR = {
|
||||
[0] = (isr_t)&_estack,
|
||||
[1 ] = Reset_Handler,
|
||||
[2 ] = NMI_Handler,
|
||||
[3 ] = HardFault_Handler,
|
||||
[4 ] = MemManage_Handler,
|
||||
[5 ] = BusFault_Handler,
|
||||
[6 ] = UsageFault_Handler,
|
||||
[7 ] = 0,
|
||||
[8 ] = 0,
|
||||
[9 ] = 0,
|
||||
[10 ] = 0,
|
||||
[11 ] = SVC_Handler,
|
||||
[12 ] = DebugMon_Handler,
|
||||
[13 ] = 0,
|
||||
[14 ] = PendSV_Handler,
|
||||
[15 ] = SysTick_Handler,
|
||||
[WWDG_IRQn + 16 ] = WWDG_IRQHandler,
|
||||
[PVD_IRQn + 16 ] = PVD_IRQHandler,
|
||||
[TAMP_STAMP_IRQn + 16 ] = TAMP_STAMP_IRQHandler,
|
||||
[RTC_WKUP_IRQn + 16 ] = RTC_WKUP_IRQHandler,
|
||||
[FLASH_IRQn + 16 ] = FLASH_IRQHandler,
|
||||
[RCC_IRQn + 16 ] = RCC_IRQHandler,
|
||||
[EXTI0_IRQn + 16 ] = EXTI0_IRQHandler,
|
||||
[EXTI1_IRQn + 16 ] = EXTI1_IRQHandler,
|
||||
[EXTI2_IRQn + 16 ] = EXTI2_IRQHandler,
|
||||
[EXTI3_IRQn + 16 ] = EXTI3_IRQHandler,
|
||||
[EXTI4_IRQn + 16 ] = EXTI4_IRQHandler,
|
||||
[DMA1_Stream0_IRQn + 16 ] = DMA1_Stream0_IRQHandler,
|
||||
[DMA1_Stream1_IRQn + 16 ] = DMA1_Stream1_IRQHandler,
|
||||
[DMA1_Stream2_IRQn + 16 ] = DMA1_Stream2_IRQHandler,
|
||||
[DMA1_Stream3_IRQn + 16 ] = DMA1_Stream3_IRQHandler,
|
||||
[DMA1_Stream4_IRQn + 16 ] = DMA1_Stream4_IRQHandler,
|
||||
[DMA1_Stream5_IRQn + 16 ] = DMA1_Stream5_IRQHandler,
|
||||
[DMA1_Stream6_IRQn + 16 ] = DMA1_Stream6_IRQHandler,
|
||||
[ADC_IRQn + 16 ] = ADC_IRQHandler,
|
||||
[CAN1_TX_IRQn + 16 ] = CAN1_TX_IRQHandler,
|
||||
[CAN1_RX0_IRQn + 16 ] = CAN1_RX0_IRQHandler,
|
||||
[CAN1_RX1_IRQn + 16 ] = CAN1_RX1_IRQHandler,
|
||||
[CAN1_SCE_IRQn + 16 ] = CAN1_SCE_IRQHandler,
|
||||
[EXTI9_5_IRQn + 16 ] = EXTI9_5_IRQHandler,
|
||||
[TIM1_BRK_TIM9_IRQn + 16 ] = TIM1_BRK_TIM9_IRQHandler,
|
||||
[TIM1_UP_TIM10_IRQn + 16 ] = TIM1_UP_TIM10_IRQHandler,
|
||||
[TIM1_TRG_COM_TIM11_IRQn + 16 ] = TIM1_TRG_COM_TIM11_IRQHandler,
|
||||
[TIM1_CC_IRQn + 16 ] = TIM1_CC_IRQHandler,
|
||||
[TIM2_IRQn + 16 ] = TIM2_IRQHandler,
|
||||
[TIM3_IRQn + 16 ] = TIM3_IRQHandler,
|
||||
[TIM4_IRQn + 16 ] = TIM4_IRQHandler,
|
||||
[I2C1_EV_IRQn + 16 ] = I2C1_EV_IRQHandler,
|
||||
[I2C1_ER_IRQn + 16 ] = I2C1_ER_IRQHandler,
|
||||
[I2C2_EV_IRQn + 16 ] = I2C2_EV_IRQHandler,
|
||||
[I2C2_ER_IRQn + 16 ] = I2C2_ER_IRQHandler,
|
||||
[SPI1_IRQn + 16 ] = SPI1_IRQHandler,
|
||||
[SPI2_IRQn + 16 ] = SPI2_IRQHandler,
|
||||
[USART1_IRQn + 16 ] = USART1_IRQHandler,
|
||||
[USART2_IRQn + 16 ] = USART2_IRQHandler,
|
||||
[USART3_IRQn + 16 ] = USART3_IRQHandler,
|
||||
[EXTI15_10_IRQn + 16 ] = EXTI15_10_IRQHandler,
|
||||
[RTC_Alarm_IRQn + 16 ] = RTC_Alarm_IRQHandler,
|
||||
[OTG_FS_WKUP_IRQn + 16 ] = OTG_FS_WKUP_IRQHandler,
|
||||
[TIM8_BRK_TIM12_IRQn + 16 ] = TIM8_BRK_TIM12_IRQHandler,
|
||||
[TIM8_UP_TIM13_IRQn + 16 ] = TIM8_UP_TIM13_IRQHandler,
|
||||
[TIM8_TRG_COM_TIM14_IRQn + 16 ] = TIM8_TRG_COM_TIM14_IRQHandler,
|
||||
[TIM8_CC_IRQn + 16 ] = TIM8_CC_IRQHandler,
|
||||
[DMA1_Stream7_IRQn + 16 ] = DMA1_Stream7_IRQHandler,
|
||||
[FSMC_IRQn + 16 ] = FSMC_IRQHandler,
|
||||
[SDIO_IRQn + 16 ] = SDIO_IRQHandler,
|
||||
[TIM5_IRQn + 16 ] = TIM5_IRQHandler,
|
||||
[SPI3_IRQn + 16 ] = SPI3_IRQHandler,
|
||||
[UART4_IRQn + 16 ] = UART4_IRQHandler,
|
||||
[UART5_IRQn + 16 ] = UART5_IRQHandler,
|
||||
[TIM6_DAC_IRQn + 16 ] = TIM6_DAC_IRQHandler,
|
||||
[TIM7_IRQn + 16 ] = TIM7_IRQHandler,
|
||||
[DMA2_Stream0_IRQn + 16 ] = DMA2_Stream0_IRQHandler,
|
||||
[DMA2_Stream1_IRQn + 16 ] = DMA2_Stream1_IRQHandler,
|
||||
[DMA2_Stream2_IRQn + 16 ] = DMA2_Stream2_IRQHandler,
|
||||
[DMA2_Stream3_IRQn + 16 ] = DMA2_Stream3_IRQHandler,
|
||||
[DMA2_Stream4_IRQn + 16 ] = DMA2_Stream4_IRQHandler,
|
||||
[ETH_IRQn + 16 ] = ETH_IRQHandler,
|
||||
[ETH_WKUP_IRQn + 16 ] = ETH_WKUP_IRQHandler,
|
||||
[CAN2_TX_IRQn + 16 ] = CAN2_TX_IRQHandler,
|
||||
[CAN2_RX0_IRQn + 16 ] = CAN2_RX0_IRQHandler,
|
||||
[CAN2_RX1_IRQn + 16 ] = CAN2_RX1_IRQHandler,
|
||||
[CAN2_SCE_IRQn + 16 ] = CAN2_SCE_IRQHandler,
|
||||
[OTG_FS_IRQn + 16 ] = OTG_FS_IRQHandler,
|
||||
[DMA2_Stream5_IRQn + 16 ] = DMA2_Stream5_IRQHandler,
|
||||
[DMA2_Stream6_IRQn + 16 ] = DMA2_Stream6_IRQHandler,
|
||||
[DMA2_Stream7_IRQn + 16 ] = DMA2_Stream7_IRQHandler,
|
||||
[USART6_IRQn + 16 ] = USART6_IRQHandler,
|
||||
[I2C3_EV_IRQn + 16 ] = I2C3_EV_IRQHandler,
|
||||
[I2C3_ER_IRQn + 16 ] = I2C3_ER_IRQHandler,
|
||||
[OTG_HS_EP1_OUT_IRQn + 16 ] = OTG_HS_EP1_OUT_IRQHandler,
|
||||
[OTG_HS_EP1_IN_IRQn + 16 ] = OTG_HS_EP1_IN_IRQHandler,
|
||||
[OTG_HS_WKUP_IRQn + 16 ] = OTG_HS_WKUP_IRQHandler,
|
||||
[OTG_HS_IRQn + 16 ] = OTG_HS_IRQHandler,
|
||||
[DCMI_IRQn + 16 ] = DCMI_IRQHandler,
|
||||
[RNG_IRQn + 16 ] = RNG_IRQHandler,
|
||||
[FPU_IRQn + 16 ] = FPU_IRQHandler,
|
||||
};
|
||||
|
||||
@@ -0,0 +1,218 @@
|
||||
|
||||
#include "stm32f429xx.h"
|
||||
#include "cortex_m_isr.h"
|
||||
|
||||
void Default_Handler() { default_isr_handler(); }
|
||||
|
||||
/* stm32f429xx specific interrupt vectors */
|
||||
WEAK_DEFAULT void Reset_Handler();
|
||||
WEAK_DEFAULT void NMI_Handler();
|
||||
WEAK_DEFAULT void HardFault_Handler();
|
||||
WEAK_DEFAULT void MemManage_Handler();
|
||||
WEAK_DEFAULT void BusFault_Handler();
|
||||
WEAK_DEFAULT void UsageFault_Handler();
|
||||
WEAK_DEFAULT void SVC_Handler();
|
||||
WEAK_DEFAULT void DebugMon_Handler();
|
||||
WEAK_DEFAULT void PendSV_Handler();
|
||||
WEAK_DEFAULT void SysTick_Handler();
|
||||
WEAK_DEFAULT void WWDG_IRQHandler();
|
||||
WEAK_DEFAULT void PVD_IRQHandler();
|
||||
WEAK_DEFAULT void TAMP_STAMP_IRQHandler();
|
||||
WEAK_DEFAULT void RTC_WKUP_IRQHandler();
|
||||
WEAK_DEFAULT void FLASH_IRQHandler();
|
||||
WEAK_DEFAULT void RCC_IRQHandler();
|
||||
WEAK_DEFAULT void EXTI0_IRQHandler();
|
||||
WEAK_DEFAULT void EXTI1_IRQHandler();
|
||||
WEAK_DEFAULT void EXTI2_IRQHandler();
|
||||
WEAK_DEFAULT void EXTI3_IRQHandler();
|
||||
WEAK_DEFAULT void EXTI4_IRQHandler();
|
||||
WEAK_DEFAULT void DMA1_Stream0_IRQHandler();
|
||||
WEAK_DEFAULT void DMA1_Stream1_IRQHandler();
|
||||
WEAK_DEFAULT void DMA1_Stream2_IRQHandler();
|
||||
WEAK_DEFAULT void DMA1_Stream3_IRQHandler();
|
||||
WEAK_DEFAULT void DMA1_Stream4_IRQHandler();
|
||||
WEAK_DEFAULT void DMA1_Stream5_IRQHandler();
|
||||
WEAK_DEFAULT void DMA1_Stream6_IRQHandler();
|
||||
WEAK_DEFAULT void ADC_IRQHandler();
|
||||
WEAK_DEFAULT void CAN1_TX_IRQHandler();
|
||||
WEAK_DEFAULT void CAN1_RX0_IRQHandler();
|
||||
WEAK_DEFAULT void CAN1_RX1_IRQHandler();
|
||||
WEAK_DEFAULT void CAN1_SCE_IRQHandler();
|
||||
WEAK_DEFAULT void EXTI9_5_IRQHandler();
|
||||
WEAK_DEFAULT void TIM1_BRK_TIM9_IRQHandler();
|
||||
WEAK_DEFAULT void TIM1_UP_TIM10_IRQHandler();
|
||||
WEAK_DEFAULT void TIM1_TRG_COM_TIM11_IRQHandler();
|
||||
WEAK_DEFAULT void TIM1_CC_IRQHandler();
|
||||
WEAK_DEFAULT void TIM2_IRQHandler();
|
||||
WEAK_DEFAULT void TIM3_IRQHandler();
|
||||
WEAK_DEFAULT void TIM4_IRQHandler();
|
||||
WEAK_DEFAULT void I2C1_EV_IRQHandler();
|
||||
WEAK_DEFAULT void I2C1_ER_IRQHandler();
|
||||
WEAK_DEFAULT void I2C2_EV_IRQHandler();
|
||||
WEAK_DEFAULT void I2C2_ER_IRQHandler();
|
||||
WEAK_DEFAULT void SPI1_IRQHandler();
|
||||
WEAK_DEFAULT void SPI2_IRQHandler();
|
||||
WEAK_DEFAULT void USART1_IRQHandler();
|
||||
WEAK_DEFAULT void USART2_IRQHandler();
|
||||
WEAK_DEFAULT void USART3_IRQHandler();
|
||||
WEAK_DEFAULT void EXTI15_10_IRQHandler();
|
||||
WEAK_DEFAULT void RTC_Alarm_IRQHandler();
|
||||
WEAK_DEFAULT void OTG_FS_WKUP_IRQHandler();
|
||||
WEAK_DEFAULT void TIM8_BRK_TIM12_IRQHandler();
|
||||
WEAK_DEFAULT void TIM8_UP_TIM13_IRQHandler();
|
||||
WEAK_DEFAULT void TIM8_TRG_COM_TIM14_IRQHandler();
|
||||
WEAK_DEFAULT void TIM8_CC_IRQHandler();
|
||||
WEAK_DEFAULT void DMA1_Stream7_IRQHandler();
|
||||
WEAK_DEFAULT void FMC_IRQHandler();
|
||||
WEAK_DEFAULT void SDIO_IRQHandler();
|
||||
WEAK_DEFAULT void TIM5_IRQHandler();
|
||||
WEAK_DEFAULT void SPI3_IRQHandler();
|
||||
WEAK_DEFAULT void UART4_IRQHandler();
|
||||
WEAK_DEFAULT void UART5_IRQHandler();
|
||||
WEAK_DEFAULT void TIM6_DAC_IRQHandler();
|
||||
WEAK_DEFAULT void TIM7_IRQHandler();
|
||||
WEAK_DEFAULT void DMA2_Stream0_IRQHandler();
|
||||
WEAK_DEFAULT void DMA2_Stream1_IRQHandler();
|
||||
WEAK_DEFAULT void DMA2_Stream2_IRQHandler();
|
||||
WEAK_DEFAULT void DMA2_Stream3_IRQHandler();
|
||||
WEAK_DEFAULT void DMA2_Stream4_IRQHandler();
|
||||
WEAK_DEFAULT void ETH_IRQHandler();
|
||||
WEAK_DEFAULT void ETH_WKUP_IRQHandler();
|
||||
WEAK_DEFAULT void CAN2_TX_IRQHandler();
|
||||
WEAK_DEFAULT void CAN2_RX0_IRQHandler();
|
||||
WEAK_DEFAULT void CAN2_RX1_IRQHandler();
|
||||
WEAK_DEFAULT void CAN2_SCE_IRQHandler();
|
||||
WEAK_DEFAULT void OTG_FS_IRQHandler();
|
||||
WEAK_DEFAULT void DMA2_Stream5_IRQHandler();
|
||||
WEAK_DEFAULT void DMA2_Stream6_IRQHandler();
|
||||
WEAK_DEFAULT void DMA2_Stream7_IRQHandler();
|
||||
WEAK_DEFAULT void USART6_IRQHandler();
|
||||
WEAK_DEFAULT void I2C3_EV_IRQHandler();
|
||||
WEAK_DEFAULT void I2C3_ER_IRQHandler();
|
||||
WEAK_DEFAULT void OTG_HS_EP1_OUT_IRQHandler();
|
||||
WEAK_DEFAULT void OTG_HS_EP1_IN_IRQHandler();
|
||||
WEAK_DEFAULT void OTG_HS_WKUP_IRQHandler();
|
||||
WEAK_DEFAULT void OTG_HS_IRQHandler();
|
||||
WEAK_DEFAULT void DCMI_IRQHandler();
|
||||
WEAK_DEFAULT void HASH_RNG_IRQHandler();
|
||||
WEAK_DEFAULT void FPU_IRQHandler();
|
||||
WEAK_DEFAULT void UART7_IRQHandler();
|
||||
WEAK_DEFAULT void UART8_IRQHandler();
|
||||
WEAK_DEFAULT void SPI4_IRQHandler();
|
||||
WEAK_DEFAULT void SPI5_IRQHandler();
|
||||
WEAK_DEFAULT void SPI6_IRQHandler();
|
||||
WEAK_DEFAULT void SAI1_IRQHandler();
|
||||
WEAK_DEFAULT void LTDC_IRQHandler();
|
||||
WEAK_DEFAULT void LTDC_ER_IRQHandler();
|
||||
WEAK_DEFAULT void DMA2D_IRQHandler();
|
||||
|
||||
/* CPU specific interrupt vector table */
|
||||
const isr_t g_pnfVectors[] ISR_VECTOR = {
|
||||
[0] = (isr_t)&_estack,
|
||||
[1 ] = Reset_Handler,
|
||||
[2 ] = NMI_Handler,
|
||||
[3 ] = HardFault_Handler,
|
||||
[4 ] = MemManage_Handler,
|
||||
[5 ] = BusFault_Handler,
|
||||
[6 ] = UsageFault_Handler,
|
||||
[7 ] = 0,
|
||||
[8 ] = 0,
|
||||
[9 ] = 0,
|
||||
[10 ] = 0,
|
||||
[11 ] = SVC_Handler,
|
||||
[12 ] = DebugMon_Handler,
|
||||
[13 ] = 0,
|
||||
[14 ] = PendSV_Handler,
|
||||
[15 ] = SysTick_Handler,
|
||||
[WWDG_IRQn + 16 ] = WWDG_IRQHandler,
|
||||
[PVD_IRQn + 16 ] = PVD_IRQHandler,
|
||||
[TAMP_STAMP_IRQn + 16 ] = TAMP_STAMP_IRQHandler,
|
||||
[RTC_WKUP_IRQn + 16 ] = RTC_WKUP_IRQHandler,
|
||||
[FLASH_IRQn + 16 ] = FLASH_IRQHandler,
|
||||
[RCC_IRQn + 16 ] = RCC_IRQHandler,
|
||||
[EXTI0_IRQn + 16 ] = EXTI0_IRQHandler,
|
||||
[EXTI1_IRQn + 16 ] = EXTI1_IRQHandler,
|
||||
[EXTI2_IRQn + 16 ] = EXTI2_IRQHandler,
|
||||
[EXTI3_IRQn + 16 ] = EXTI3_IRQHandler,
|
||||
[EXTI4_IRQn + 16 ] = EXTI4_IRQHandler,
|
||||
[DMA1_Stream0_IRQn + 16 ] = DMA1_Stream0_IRQHandler,
|
||||
[DMA1_Stream1_IRQn + 16 ] = DMA1_Stream1_IRQHandler,
|
||||
[DMA1_Stream2_IRQn + 16 ] = DMA1_Stream2_IRQHandler,
|
||||
[DMA1_Stream3_IRQn + 16 ] = DMA1_Stream3_IRQHandler,
|
||||
[DMA1_Stream4_IRQn + 16 ] = DMA1_Stream4_IRQHandler,
|
||||
[DMA1_Stream5_IRQn + 16 ] = DMA1_Stream5_IRQHandler,
|
||||
[DMA1_Stream6_IRQn + 16 ] = DMA1_Stream6_IRQHandler,
|
||||
[ADC_IRQn + 16 ] = ADC_IRQHandler,
|
||||
[CAN1_TX_IRQn + 16 ] = CAN1_TX_IRQHandler,
|
||||
[CAN1_RX0_IRQn + 16 ] = CAN1_RX0_IRQHandler,
|
||||
[CAN1_RX1_IRQn + 16 ] = CAN1_RX1_IRQHandler,
|
||||
[CAN1_SCE_IRQn + 16 ] = CAN1_SCE_IRQHandler,
|
||||
[EXTI9_5_IRQn + 16 ] = EXTI9_5_IRQHandler,
|
||||
[TIM1_BRK_TIM9_IRQn + 16 ] = TIM1_BRK_TIM9_IRQHandler,
|
||||
[TIM1_UP_TIM10_IRQn + 16 ] = TIM1_UP_TIM10_IRQHandler,
|
||||
[TIM1_TRG_COM_TIM11_IRQn + 16 ] = TIM1_TRG_COM_TIM11_IRQHandler,
|
||||
[TIM1_CC_IRQn + 16 ] = TIM1_CC_IRQHandler,
|
||||
[TIM2_IRQn + 16 ] = TIM2_IRQHandler,
|
||||
[TIM3_IRQn + 16 ] = TIM3_IRQHandler,
|
||||
[TIM4_IRQn + 16 ] = TIM4_IRQHandler,
|
||||
[I2C1_EV_IRQn + 16 ] = I2C1_EV_IRQHandler,
|
||||
[I2C1_ER_IRQn + 16 ] = I2C1_ER_IRQHandler,
|
||||
[I2C2_EV_IRQn + 16 ] = I2C2_EV_IRQHandler,
|
||||
[I2C2_ER_IRQn + 16 ] = I2C2_ER_IRQHandler,
|
||||
[SPI1_IRQn + 16 ] = SPI1_IRQHandler,
|
||||
[SPI2_IRQn + 16 ] = SPI2_IRQHandler,
|
||||
[USART1_IRQn + 16 ] = USART1_IRQHandler,
|
||||
[USART2_IRQn + 16 ] = USART2_IRQHandler,
|
||||
[USART3_IRQn + 16 ] = USART3_IRQHandler,
|
||||
[EXTI15_10_IRQn + 16 ] = EXTI15_10_IRQHandler,
|
||||
[RTC_Alarm_IRQn + 16 ] = RTC_Alarm_IRQHandler,
|
||||
[OTG_FS_WKUP_IRQn + 16 ] = OTG_FS_WKUP_IRQHandler,
|
||||
[TIM8_BRK_TIM12_IRQn + 16 ] = TIM8_BRK_TIM12_IRQHandler,
|
||||
[TIM8_UP_TIM13_IRQn + 16 ] = TIM8_UP_TIM13_IRQHandler,
|
||||
[TIM8_TRG_COM_TIM14_IRQn + 16 ] = TIM8_TRG_COM_TIM14_IRQHandler,
|
||||
[TIM8_CC_IRQn + 16 ] = TIM8_CC_IRQHandler,
|
||||
[DMA1_Stream7_IRQn + 16 ] = DMA1_Stream7_IRQHandler,
|
||||
[FMC_IRQn + 16 ] = FMC_IRQHandler,
|
||||
[SDIO_IRQn + 16 ] = SDIO_IRQHandler,
|
||||
[TIM5_IRQn + 16 ] = TIM5_IRQHandler,
|
||||
[SPI3_IRQn + 16 ] = SPI3_IRQHandler,
|
||||
[UART4_IRQn + 16 ] = UART4_IRQHandler,
|
||||
[UART5_IRQn + 16 ] = UART5_IRQHandler,
|
||||
[TIM6_DAC_IRQn + 16 ] = TIM6_DAC_IRQHandler,
|
||||
[TIM7_IRQn + 16 ] = TIM7_IRQHandler,
|
||||
[DMA2_Stream0_IRQn + 16 ] = DMA2_Stream0_IRQHandler,
|
||||
[DMA2_Stream1_IRQn + 16 ] = DMA2_Stream1_IRQHandler,
|
||||
[DMA2_Stream2_IRQn + 16 ] = DMA2_Stream2_IRQHandler,
|
||||
[DMA2_Stream3_IRQn + 16 ] = DMA2_Stream3_IRQHandler,
|
||||
[DMA2_Stream4_IRQn + 16 ] = DMA2_Stream4_IRQHandler,
|
||||
[ETH_IRQn + 16 ] = ETH_IRQHandler,
|
||||
[ETH_WKUP_IRQn + 16 ] = ETH_WKUP_IRQHandler,
|
||||
[CAN2_TX_IRQn + 16 ] = CAN2_TX_IRQHandler,
|
||||
[CAN2_RX0_IRQn + 16 ] = CAN2_RX0_IRQHandler,
|
||||
[CAN2_RX1_IRQn + 16 ] = CAN2_RX1_IRQHandler,
|
||||
[CAN2_SCE_IRQn + 16 ] = CAN2_SCE_IRQHandler,
|
||||
[OTG_FS_IRQn + 16 ] = OTG_FS_IRQHandler,
|
||||
[DMA2_Stream5_IRQn + 16 ] = DMA2_Stream5_IRQHandler,
|
||||
[DMA2_Stream6_IRQn + 16 ] = DMA2_Stream6_IRQHandler,
|
||||
[DMA2_Stream7_IRQn + 16 ] = DMA2_Stream7_IRQHandler,
|
||||
[USART6_IRQn + 16 ] = USART6_IRQHandler,
|
||||
[I2C3_EV_IRQn + 16 ] = I2C3_EV_IRQHandler,
|
||||
[I2C3_ER_IRQn + 16 ] = I2C3_ER_IRQHandler,
|
||||
[OTG_HS_EP1_OUT_IRQn + 16 ] = OTG_HS_EP1_OUT_IRQHandler,
|
||||
[OTG_HS_EP1_IN_IRQn + 16 ] = OTG_HS_EP1_IN_IRQHandler,
|
||||
[OTG_HS_WKUP_IRQn + 16 ] = OTG_HS_WKUP_IRQHandler,
|
||||
[OTG_HS_IRQn + 16 ] = OTG_HS_IRQHandler,
|
||||
[DCMI_IRQn + 16 ] = DCMI_IRQHandler,
|
||||
[HASH_RNG_IRQn + 16 ] = HASH_RNG_IRQHandler,
|
||||
[FPU_IRQn + 16 ] = FPU_IRQHandler,
|
||||
[UART7_IRQn + 16 ] = UART7_IRQHandler,
|
||||
[UART8_IRQn + 16 ] = UART8_IRQHandler,
|
||||
[SPI4_IRQn + 16 ] = SPI4_IRQHandler,
|
||||
[SPI5_IRQn + 16 ] = SPI5_IRQHandler,
|
||||
[SPI6_IRQn + 16 ] = SPI6_IRQHandler,
|
||||
[SAI1_IRQn + 16 ] = SAI1_IRQHandler,
|
||||
[LTDC_IRQn + 16 ] = LTDC_IRQHandler,
|
||||
[LTDC_ER_IRQn + 16 ] = LTDC_ER_IRQHandler,
|
||||
[DMA2D_IRQn + 16 ] = DMA2D_IRQHandler,
|
||||
};
|
||||
|
||||
@@ -151,48 +151,42 @@ void SDRAM_InitSequence(void)
|
||||
FMC_SDRAM_CommandTypeDef FMC_SDRAMCommandStructure;
|
||||
uint32_t tmpr = 0;
|
||||
|
||||
/* Step 3 --------------------------------------------------------------------*/
|
||||
/* Configure a clock configuration enable command */
|
||||
FMC_SDRAMCommandStructure.CommandMode = FMC_SDRAM_CMD_CLK_ENABLE;
|
||||
FMC_SDRAMCommandStructure.CommandTarget = COMMAND_TARGET;
|
||||
FMC_SDRAMCommandStructure.AutoRefreshNumber = 1;
|
||||
FMC_SDRAMCommandStructure.ModeRegisterDefinition = 0;
|
||||
/* Wait until the SDRAM controller is ready */
|
||||
while((__FMC_SDRAM_GET_FLAG(FMC_SDRAM_DEVICE, FMC_SDRAM_FLAG_BUSY) != 0));
|
||||
|
||||
/* Send the command */
|
||||
FMC_SDRAM_SendCommand(FMC_SDRAM_DEVICE, &FMC_SDRAMCommandStructure, 10);
|
||||
|
||||
/* Step 4 --------------------------------------------------------------------*/
|
||||
/* Insert 100 ms delay */
|
||||
delay_ms(100);
|
||||
/* Wait until the SDRAM controller is ready */
|
||||
while((__FMC_SDRAM_GET_FLAG(FMC_SDRAM_DEVICE, FMC_SDRAM_FLAG_BUSY) != 0));
|
||||
|
||||
/* Step 5 --------------------------------------------------------------------*/
|
||||
/* Configure a PALL (precharge all) command */
|
||||
FMC_SDRAMCommandStructure.CommandMode = FMC_SDRAM_CMD_PALL;
|
||||
FMC_SDRAMCommandStructure.CommandTarget = COMMAND_TARGET;
|
||||
FMC_SDRAMCommandStructure.AutoRefreshNumber = 1;
|
||||
FMC_SDRAMCommandStructure.ModeRegisterDefinition = 0;
|
||||
/* Wait until the SDRAM controller is ready */
|
||||
while((__FMC_SDRAM_GET_FLAG(FMC_SDRAM_DEVICE, FMC_SDRAM_FLAG_BUSY) != 0));
|
||||
|
||||
/* Send the command */
|
||||
FMC_SDRAM_SendCommand(FMC_SDRAM_DEVICE, &FMC_SDRAMCommandStructure, 10);
|
||||
|
||||
/* Step 6 --------------------------------------------------------------------*/
|
||||
/* Configure a Auto-Refresh command */
|
||||
FMC_SDRAMCommandStructure.CommandMode = FMC_SDRAM_CMD_AUTOREFRESH_MODE;
|
||||
FMC_SDRAMCommandStructure.CommandTarget = COMMAND_TARGET;
|
||||
FMC_SDRAMCommandStructure.AutoRefreshNumber = 4;
|
||||
FMC_SDRAMCommandStructure.ModeRegisterDefinition = 0;
|
||||
/* Wait until the SDRAM controller is ready */
|
||||
while((__FMC_SDRAM_GET_FLAG(FMC_SDRAM_DEVICE, FMC_SDRAM_FLAG_BUSY) != 0));
|
||||
|
||||
/* Wait until the SDRAM controller is ready */
|
||||
while((__FMC_SDRAM_GET_FLAG(FMC_SDRAM_DEVICE, FMC_SDRAM_FLAG_BUSY) != 0));
|
||||
/* Configure a Auto-Refresh command */
|
||||
FMC_SDRAMCommandStructure.CommandMode = FMC_SDRAM_CMD_AUTOREFRESH_MODE;
|
||||
FMC_SDRAMCommandStructure.CommandTarget = COMMAND_TARGET;
|
||||
FMC_SDRAMCommandStructure.AutoRefreshNumber = 4;
|
||||
FMC_SDRAMCommandStructure.ModeRegisterDefinition = 0;
|
||||
|
||||
/* Send the command */
|
||||
FMC_SDRAM_SendCommand(FMC_SDRAM_DEVICE, &FMC_SDRAMCommandStructure, 10);
|
||||
/* Send the command */
|
||||
FMC_SDRAM_SendCommand(FMC_SDRAM_DEVICE, &FMC_SDRAMCommandStructure, 10);
|
||||
|
||||
/* Wait until the SDRAM controller is ready */
|
||||
while((__FMC_SDRAM_GET_FLAG(FMC_SDRAM_DEVICE, FMC_SDRAM_FLAG_BUSY) != 0));
|
||||
|
||||
/* Step 7 --------------------------------------------------------------------*/
|
||||
/* Program the external memory mode register */
|
||||
tmpr = (uint32_t)SDRAM_MODEREG_BURST_LENGTH_2 |
|
||||
SDRAM_MODEREG_BURST_TYPE_SEQUENTIAL |
|
||||
@@ -206,9 +200,6 @@ void SDRAM_InitSequence(void)
|
||||
FMC_SDRAMCommandStructure.AutoRefreshNumber = 1;
|
||||
FMC_SDRAMCommandStructure.ModeRegisterDefinition = tmpr;
|
||||
|
||||
/* Wait until the SDRAM controller is ready */
|
||||
while((__FMC_SDRAM_GET_FLAG(FMC_SDRAM_DEVICE, FMC_SDRAM_FLAG_BUSY) != 0));
|
||||
|
||||
/* Send the command */
|
||||
FMC_SDRAM_SendCommand(FMC_SDRAM_DEVICE, &FMC_SDRAMCommandStructure, 10);
|
||||
|
||||
@@ -224,20 +215,18 @@ void SDRAM_InitSequence(void)
|
||||
= [(64ms/4096) * 84MHz] - 20 = 1312 - 20 ~ 1292 */
|
||||
FMC_SDRAM_ProgramRefreshRate(FMC_SDRAM_DEVICE, 1292);
|
||||
#endif
|
||||
|
||||
/* Wait until the SDRAM controller is ready */
|
||||
while((__FMC_SDRAM_GET_FLAG(FMC_SDRAM_DEVICE, FMC_SDRAM_FLAG_BUSY) != 0));
|
||||
}
|
||||
|
||||
extern "C" void SDRAM_Init(void)
|
||||
{
|
||||
//delay funcion needed
|
||||
delaysInit();
|
||||
// Clocks must be enabled here, because the sdramInit is called before main
|
||||
LL_AHB3_GRP1_EnableClock(LL_AHB3_GRP1_PERIPH_FMC);
|
||||
|
||||
/* GPIO configuration for FMC SDRAM bank */
|
||||
SDRAM_GPIOConfig();
|
||||
|
||||
/* Enable FMC clock */
|
||||
LL_AHB3_GRP1_EnableClock(LL_AHB3_GRP1_PERIPH_FMC);
|
||||
|
||||
/* FMC Configuration ---------------------------------------------------------*/
|
||||
FMC_SDRAM_InitTypeDef FMC_SDRAMInitStructure;
|
||||
@@ -280,12 +269,13 @@ extern "C" void SDRAM_Init(void)
|
||||
FMC_SDRAMInitStructure.SDClockPeriod = SDRAM_CLK_PERIOD;
|
||||
FMC_SDRAMInitStructure.ReadBurst = SDRAM_READBURST;
|
||||
FMC_SDRAMInitStructure.ReadPipeDelay = SDRAM_READPIPEDELAY;
|
||||
// FMC_SDRAMInitStructure.FMC_SDRAMTimingStruct = &FMC_SDRAMTimingInitStructure;
|
||||
|
||||
/* FMC SDRAM bank initialization */
|
||||
FMC_SDRAM_Init(FMC_SDRAM_DEVICE, &FMC_SDRAMInitStructure);
|
||||
FMC_SDRAM_Timing_Init(FMC_SDRAM_DEVICE, &FMC_SDRAMTimingInitStructure, SDRAM_BANK);
|
||||
|
||||
/* Wait until the SDRAM controller is ready */
|
||||
while((__FMC_SDRAM_GET_FLAG(FMC_SDRAM_DEVICE, FMC_SDRAM_FLAG_BUSY) != 0));
|
||||
|
||||
/* FMC SDRAM device initialization sequence */
|
||||
SDRAM_InitSequence();
|
||||
|
||||
@@ -257,7 +257,6 @@ set(BOARD_COMMON_SRC
|
||||
targets/common/arm/stm32/pwr_driver.cpp
|
||||
targets/common/arm/stm32/rotary_encoder_driver.cpp
|
||||
targets/common/arm/stm32/rtc_driver.cpp
|
||||
targets/common/arm/stm32/sdram_driver.cpp
|
||||
targets/common/arm/stm32/spi_flash.cpp
|
||||
targets/common/arm/stm32/watchdog_driver.cpp
|
||||
drivers/frftl.cpp
|
||||
@@ -290,6 +289,7 @@ endif()
|
||||
add_library(board_bl OBJECT EXCLUDE_FROM_ALL
|
||||
${BOARD_COMMON_SRC}
|
||||
${RADIO_SRC_DIR}/gui/colorlcd/boot_menu.cpp
|
||||
targets/common/arm/stm32/sdram_driver.cpp
|
||||
)
|
||||
add_dependencies(board_bl ${BITMAPS_TARGET})
|
||||
set(BOOTLOADER_SRC ${BOOTLOADER_SRC} $<TARGET_OBJECTS:board_bl>)
|
||||
|
||||
@@ -65,6 +65,17 @@ void boardBLEarlyInit()
|
||||
}
|
||||
#endif
|
||||
|
||||
extern "C" void SDRAM_Init();
|
||||
|
||||
void boardBLPreJump()
|
||||
{
|
||||
SDRAM_Init();
|
||||
}
|
||||
|
||||
void boardBLInit()
|
||||
{
|
||||
SDRAM_Init();
|
||||
}
|
||||
|
||||
#if !defined(BOOT)
|
||||
#include "edgetx.h"
|
||||
@@ -156,7 +167,6 @@ void boardInit()
|
||||
!defined(DEBUG)
|
||||
// This is needed to prevent radio from starting when usb is plugged to charge
|
||||
if (usbPlugged()) {
|
||||
delaysInit();
|
||||
#if defined(AUDIO_MUTE_GPIO)
|
||||
// Charging can make a buzzing noise
|
||||
gpio_init(AUDIO_MUTE_GPIO, GPIO_OUT, GPIO_PIN_SPEED_LOW);
|
||||
|
||||
@@ -176,7 +176,6 @@ set(BOARD_COMMON_SRC
|
||||
targets/common/arm/stm32/flash_driver.cpp
|
||||
targets/common/arm/stm32/pwr_driver.cpp
|
||||
targets/common/arm/stm32/rtc_driver.cpp
|
||||
targets/common/arm/stm32/sdram_driver.cpp
|
||||
targets/common/arm/stm32/spi_flash.cpp
|
||||
targets/common/arm/stm32/watchdog_driver.cpp
|
||||
drivers/frftl.cpp
|
||||
@@ -199,6 +198,7 @@ endif()
|
||||
add_library(board_bl OBJECT EXCLUDE_FROM_ALL
|
||||
${BOARD_COMMON_SRC}
|
||||
${RADIO_SRC_DIR}/gui/colorlcd/boot_menu.cpp
|
||||
targets/common/arm/stm32/sdram_driver.cpp
|
||||
)
|
||||
add_dependencies(board_bl ${BITMAPS_TARGET})
|
||||
set(BOOTLOADER_SRC ${BOOTLOADER_SRC} $<TARGET_OBJECTS:board_bl>)
|
||||
|
||||
@@ -35,6 +35,12 @@ void backlightLowInit( void )
|
||||
gpio_clear(BACKLIGHT_GPIO);
|
||||
}
|
||||
|
||||
#if defined(BOOT)
|
||||
void* _bl_init_hook[] __INIT_HOOK = {
|
||||
(void*)backlightLowInit,
|
||||
};
|
||||
#endif
|
||||
|
||||
void backlightInit()
|
||||
{
|
||||
// PIN init
|
||||
|
||||
@@ -59,6 +59,8 @@
|
||||
// Common ADC driver
|
||||
extern const etx_hal_adc_driver_t _adc_driver;
|
||||
|
||||
extern "C" void SDRAM_Init();
|
||||
|
||||
#if defined(SEMIHOSTING)
|
||||
extern "C" void initialise_monitor_handles();
|
||||
#endif
|
||||
@@ -72,6 +74,7 @@ extern "C" void flushFTL();
|
||||
|
||||
static uint8_t boardGetPcbRev()
|
||||
{
|
||||
delaysInit();
|
||||
gpio_init(INTMODULE_PWR_GPIO, GPIO_IN, GPIO_PIN_SPEED_LOW);
|
||||
delay_ms(1); // delay to let the input settle, else it does not work properly
|
||||
|
||||
@@ -176,12 +179,18 @@ void boardBLEarlyInit()
|
||||
#endif
|
||||
}
|
||||
|
||||
#if defined(RADIO_NB4P)
|
||||
void boardBLPreJump()
|
||||
{
|
||||
SDRAM_Init();
|
||||
#if defined(RADIO_NB4P)
|
||||
LL_ADC_Disable(ADC_MAIN);
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
void boardBLInit()
|
||||
{
|
||||
SDRAM_Init();
|
||||
}
|
||||
|
||||
static void monitorInit()
|
||||
{
|
||||
|
||||
Reference in New Issue
Block a user