Review line ending handling (#4820)
* New line end handling rules * Normalize all the line endings
This commit is contained in:
3djc
+325
-325
@@ -1,325 +1,325 @@
|
||||
/*
|
||||
* Copyright (C) OpenTX
|
||||
*
|
||||
* Based on code named
|
||||
* th9x - http://code.google.com/p/th9x
|
||||
* er9x - http://code.google.com/p/er9x
|
||||
* gruvin9x - http://code.google.com/p/gruvin9x
|
||||
*
|
||||
* License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#include "opentx.h"
|
||||
|
||||
#if defined(__cplusplus) && !defined(SIMU)
|
||||
extern "C" {
|
||||
#endif
|
||||
#include "usb_dcd_int.h"
|
||||
#include "usb_bsp.h"
|
||||
#if defined(__cplusplus) && !defined(SIMU)
|
||||
}
|
||||
#endif
|
||||
|
||||
void watchdogInit(unsigned int duration)
|
||||
{
|
||||
IWDG->KR = 0x5555; // Unlock registers
|
||||
IWDG->PR = 3; // Divide by 32 => 1kHz clock
|
||||
IWDG->KR = 0x5555; // Unlock registers
|
||||
IWDG->RLR = duration; // 1.5 seconds nominal
|
||||
IWDG->KR = 0xAAAA; // reload
|
||||
IWDG->KR = 0xCCCC; // start
|
||||
}
|
||||
|
||||
// Starts TIMER at 2MHz
|
||||
void init2MhzTimer()
|
||||
{
|
||||
TIMER_2MHz_TIMER->PSC = (PERI1_FREQUENCY * TIMER_MULT_APB1) / 2000000 - 1 ; // 0.5 uS, 2 MHz
|
||||
TIMER_2MHz_TIMER->ARR = 65535;
|
||||
TIMER_2MHz_TIMER->CR2 = 0;
|
||||
TIMER_2MHz_TIMER->CR1 = TIM_CR1_CEN;
|
||||
}
|
||||
|
||||
// Starts TIMER at 200Hz (5ms)
|
||||
void init5msTimer()
|
||||
{
|
||||
INTERRUPT_5MS_TIMER->ARR = 4999 ; // 5mS
|
||||
INTERRUPT_5MS_TIMER->PSC = (PERI1_FREQUENCY * TIMER_MULT_APB1) / 1000000 - 1 ; // 1uS from 30MHz
|
||||
INTERRUPT_5MS_TIMER->CCER = 0 ;
|
||||
INTERRUPT_5MS_TIMER->CCMR1 = 0 ;
|
||||
INTERRUPT_5MS_TIMER->EGR = 0 ;
|
||||
INTERRUPT_5MS_TIMER->CR1 = 5 ;
|
||||
INTERRUPT_5MS_TIMER->DIER |= 1 ;
|
||||
NVIC_EnableIRQ(INTERRUPT_5MS_IRQn) ;
|
||||
NVIC_SetPriority(INTERRUPT_5MS_IRQn, 7);
|
||||
}
|
||||
|
||||
void stop5msTimer( void )
|
||||
{
|
||||
INTERRUPT_5MS_TIMER->CR1 = 0 ; // stop timer
|
||||
NVIC_DisableIRQ(INTERRUPT_5MS_IRQn) ;
|
||||
}
|
||||
|
||||
// TODO use the same than board_sky9x.cpp
|
||||
void interrupt5ms()
|
||||
{
|
||||
static uint32_t pre_scale ; // Used to get 10 Hz counter
|
||||
|
||||
AUDIO_HEARTBEAT();
|
||||
|
||||
#if defined(HAPTIC)
|
||||
HAPTIC_HEARTBEAT();
|
||||
#endif
|
||||
|
||||
if (++pre_scale >= 2) {
|
||||
pre_scale = 0 ;
|
||||
DEBUG_TIMER_START(debugTimerPer10ms);
|
||||
per10ms();
|
||||
DEBUG_TIMER_STOP(debugTimerPer10ms);
|
||||
}
|
||||
|
||||
#if defined(ROTARY_ENCODER_NAVIGATION)
|
||||
checkRotaryEncoder();
|
||||
#endif
|
||||
}
|
||||
|
||||
#if !defined(SIMU)
|
||||
extern "C" void INTERRUPT_5MS_IRQHandler()
|
||||
{
|
||||
INTERRUPT_5MS_TIMER->SR &= ~TIM_SR_UIF ;
|
||||
interrupt5ms() ;
|
||||
DEBUG_INTERRUPT(INT_5MS);
|
||||
}
|
||||
#endif
|
||||
|
||||
#if defined(PCBX9E) && !defined(SIMU)
|
||||
#define PWR_PRESS_DURATION_MIN 200 // 2s
|
||||
#define PWR_PRESS_DURATION_MAX 500 // 5s
|
||||
|
||||
const pm_uchar bmp_startup[] PROGMEM = {
|
||||
#include "startup.lbm"
|
||||
};
|
||||
|
||||
const pm_uchar bmp_lock[] PROGMEM = {
|
||||
#include "lock.lbm"
|
||||
};
|
||||
#endif // defined(PCBX9E) && !defined(SIMU)
|
||||
|
||||
#if defined(PCBX7)
|
||||
void sportUpdateInit()
|
||||
{
|
||||
GPIO_InitTypeDef GPIO_InitStructure;
|
||||
GPIO_InitStructure.GPIO_Pin = SPORT_UPDATE_PWR_GPIO_PIN;
|
||||
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT;
|
||||
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
|
||||
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
|
||||
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP;
|
||||
GPIO_Init(SPORT_UPDATE_PWR_GPIO, &GPIO_InitStructure);
|
||||
}
|
||||
|
||||
void sportUpdatePowerOn()
|
||||
{
|
||||
if (IS_PCBREV_40())
|
||||
GPIO_SetBits(SPORT_UPDATE_PWR_GPIO, SPORT_UPDATE_PWR_GPIO_PIN);
|
||||
else
|
||||
EXTERNAL_MODULE_ON();
|
||||
}
|
||||
|
||||
void sportUpdatePowerOff()
|
||||
{
|
||||
if (IS_PCBREV_40())
|
||||
GPIO_ResetBits(SPORT_UPDATE_PWR_GPIO, SPORT_UPDATE_PWR_GPIO_PIN);
|
||||
else
|
||||
EXTERNAL_MODULE_OFF();
|
||||
}
|
||||
#endif
|
||||
|
||||
void boardInit()
|
||||
{
|
||||
#if !defined(SIMU)
|
||||
RCC_AHB1PeriphClockCmd(PWR_RCC_AHB1Periph | PCBREV_RCC_AHB1Periph | KEYS_RCC_AHB1Periph | LCD_RCC_AHB1Periph | AUDIO_RCC_AHB1Periph | BACKLIGHT_RCC_AHB1Periph | ADC_RCC_AHB1Periph | I2C_RCC_AHB1Periph | SD_RCC_AHB1Periph | HAPTIC_RCC_AHB1Periph | INTMODULE_RCC_AHB1Periph | EXTMODULE_RCC_AHB1Periph | TELEMETRY_RCC_AHB1Periph | SPORT_UPDATE_RCC_AHB1Periph | SERIAL_RCC_AHB1Periph | TRAINER_RCC_AHB1Periph | HEARTBEAT_RCC_AHB1Periph, ENABLE);
|
||||
RCC_APB1PeriphClockCmd(LCD_RCC_APB1Periph | AUDIO_RCC_APB1Periph | BACKLIGHT_RCC_APB1Periph | INTERRUPT_5MS_APB1Periph | TIMER_2MHz_APB1Periph | I2C_RCC_APB1Periph | SD_RCC_APB1Periph | TRAINER_RCC_APB1Periph | TELEMETRY_RCC_APB1Periph | SERIAL_RCC_APB1Periph, ENABLE);
|
||||
RCC_APB2PeriphClockCmd(BACKLIGHT_RCC_APB2Periph | ADC_RCC_APB2Periph | HAPTIC_RCC_APB2Periph | INTMODULE_RCC_APB2Periph | EXTMODULE_RCC_APB2Periph | HEARTBEAT_RCC_APB2Periph, ENABLE);
|
||||
|
||||
#if !defined(PCBX9E)
|
||||
// some X9E boards need that the pwrInit() is moved a little bit later
|
||||
pwrInit();
|
||||
#endif
|
||||
|
||||
#if defined(PCBX7)
|
||||
ledInit();
|
||||
ledGreen();
|
||||
#endif
|
||||
|
||||
keysInit();
|
||||
adcInit();
|
||||
delaysInit();
|
||||
lcdInit(); // delaysInit() must be called before
|
||||
audioInit();
|
||||
init2MhzTimer();
|
||||
init5msTimer();
|
||||
__enable_irq();
|
||||
i2cInit();
|
||||
usbInit();
|
||||
|
||||
#if defined(DEBUG) && !defined(PCBX7)
|
||||
serial2Init(0, 0); // default serial mode (None if DEBUG not defined)
|
||||
TRACE("\nTaranis board started :)");
|
||||
#endif
|
||||
|
||||
#if defined(HAPTIC)
|
||||
hapticInit();
|
||||
#endif
|
||||
|
||||
#if defined(PCBX9E) || defined(PCBX7)
|
||||
bluetoothInit(BLUETOOTH_DEFAULT_BAUDRATE);
|
||||
#endif
|
||||
|
||||
#if defined(DEBUG)
|
||||
DBGMCU_APB1PeriphConfig(DBGMCU_IWDG_STOP|DBGMCU_TIM1_STOP|DBGMCU_TIM2_STOP|DBGMCU_TIM3_STOP|DBGMCU_TIM6_STOP|DBGMCU_TIM8_STOP|DBGMCU_TIM10_STOP|DBGMCU_TIM13_STOP|DBGMCU_TIM14_STOP, ENABLE);
|
||||
#endif
|
||||
|
||||
#if defined(PCBX9E)
|
||||
if (!WAS_RESET_BY_WATCHDOG_OR_SOFTWARE()) {
|
||||
lcdClear();
|
||||
lcdDrawBitmap(76, 2, bmp_lock, 0, 60);
|
||||
lcdRefresh();
|
||||
lcdRefreshWait();
|
||||
|
||||
tmr10ms_t start = get_tmr10ms();
|
||||
tmr10ms_t duration = 0;
|
||||
uint8_t pwr_on = 0;
|
||||
while (pwrPressed()) {
|
||||
duration = get_tmr10ms() - start;
|
||||
if (duration < PWR_PRESS_DURATION_MIN) {
|
||||
unsigned index = duration / (PWR_PRESS_DURATION_MIN / 4);
|
||||
lcdClear();
|
||||
lcdDrawBitmap(76, 2, bmp_startup, index*60, 60);
|
||||
}
|
||||
else if (duration >= PWR_PRESS_DURATION_MAX) {
|
||||
drawSleepBitmap();
|
||||
backlightDisable();
|
||||
}
|
||||
else {
|
||||
if (pwr_on != 1) {
|
||||
pwr_on = 1;
|
||||
pwrInit();
|
||||
backlightInit();
|
||||
haptic.play(15, 3, PLAY_NOW);
|
||||
}
|
||||
}
|
||||
lcdRefresh();
|
||||
lcdRefreshWait();
|
||||
}
|
||||
if (duration < PWR_PRESS_DURATION_MIN || duration >= PWR_PRESS_DURATION_MAX) {
|
||||
boardOff();
|
||||
}
|
||||
}
|
||||
else {
|
||||
pwrInit();
|
||||
backlightInit();
|
||||
}
|
||||
toplcdInit();
|
||||
#else
|
||||
backlightInit();
|
||||
#endif
|
||||
|
||||
#if defined(PCBX7)
|
||||
if (IS_PCBREV_40()) {
|
||||
sportUpdateInit();
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif // !defined(SIMU)
|
||||
}
|
||||
|
||||
void boardOff()
|
||||
{
|
||||
#if defined(PCBX7)
|
||||
ledOff();
|
||||
#endif
|
||||
|
||||
BACKLIGHT_DISABLE();
|
||||
|
||||
#if defined(PCBX9E)
|
||||
toplcdOff();
|
||||
#endif
|
||||
|
||||
#if defined(PCBX9E) || defined(PCBX7)
|
||||
while (pwrPressed()) {
|
||||
wdt_reset();
|
||||
}
|
||||
#endif
|
||||
|
||||
lcdOff();
|
||||
SysTick->CTRL = 0; // turn off systick
|
||||
pwrOff();
|
||||
}
|
||||
|
||||
uint8_t currentTrainerMode = 0xff;
|
||||
|
||||
void checkTrainerSettings()
|
||||
{
|
||||
uint8_t requiredTrainerMode = g_model.trainerMode;
|
||||
if (requiredTrainerMode != currentTrainerMode) {
|
||||
switch (currentTrainerMode) {
|
||||
case TRAINER_MODE_MASTER_TRAINER_JACK:
|
||||
stop_trainer_capture();
|
||||
break;
|
||||
case TRAINER_MODE_SLAVE:
|
||||
stop_trainer_ppm();
|
||||
break;
|
||||
case TRAINER_MODE_MASTER_CPPM_EXTERNAL_MODULE:
|
||||
stop_cppm_on_heartbeat_capture() ;
|
||||
break;
|
||||
case TRAINER_MODE_MASTER_SBUS_EXTERNAL_MODULE:
|
||||
stop_sbus_on_heartbeat_capture() ;
|
||||
break;
|
||||
#if defined(SERIAL2)
|
||||
case TRAINER_MODE_MASTER_BATTERY_COMPARTMENT:
|
||||
serial2Stop();
|
||||
#endif
|
||||
}
|
||||
|
||||
currentTrainerMode = requiredTrainerMode;
|
||||
switch (requiredTrainerMode) {
|
||||
case TRAINER_MODE_SLAVE:
|
||||
init_trainer_ppm();
|
||||
break;
|
||||
case TRAINER_MODE_MASTER_CPPM_EXTERNAL_MODULE:
|
||||
init_cppm_on_heartbeat_capture() ;
|
||||
break;
|
||||
case TRAINER_MODE_MASTER_SBUS_EXTERNAL_MODULE:
|
||||
init_sbus_on_heartbeat_capture() ;
|
||||
break;
|
||||
#if defined(SERIAL2)
|
||||
case TRAINER_MODE_MASTER_BATTERY_COMPARTMENT:
|
||||
if (g_eeGeneral.serial2Mode == UART_MODE_SBUS_TRAINER) {
|
||||
serial2SbusInit();
|
||||
break;
|
||||
}
|
||||
// no break
|
||||
#endif
|
||||
default:
|
||||
// master is default
|
||||
init_trainer_capture();
|
||||
break;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
uint16_t getBatteryVoltage()
|
||||
{
|
||||
int32_t instant_vbat = anaIn(TX_VOLTAGE); // using filtered ADC value on purpose
|
||||
instant_vbat = (instant_vbat * BATT_SCALE * (128 + g_eeGeneral.txVoltageCalibration) ) / 26214;
|
||||
instant_vbat += 20; // add 0.2V because of the diode TODO check if this is needed, but removal will beak existing calibrations!!!
|
||||
return (uint16_t)instant_vbat;
|
||||
}
|
||||
/*
|
||||
* Copyright (C) OpenTX
|
||||
*
|
||||
* Based on code named
|
||||
* th9x - http://code.google.com/p/th9x
|
||||
* er9x - http://code.google.com/p/er9x
|
||||
* gruvin9x - http://code.google.com/p/gruvin9x
|
||||
*
|
||||
* License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#include "opentx.h"
|
||||
|
||||
#if defined(__cplusplus) && !defined(SIMU)
|
||||
extern "C" {
|
||||
#endif
|
||||
#include "usb_dcd_int.h"
|
||||
#include "usb_bsp.h"
|
||||
#if defined(__cplusplus) && !defined(SIMU)
|
||||
}
|
||||
#endif
|
||||
|
||||
void watchdogInit(unsigned int duration)
|
||||
{
|
||||
IWDG->KR = 0x5555; // Unlock registers
|
||||
IWDG->PR = 3; // Divide by 32 => 1kHz clock
|
||||
IWDG->KR = 0x5555; // Unlock registers
|
||||
IWDG->RLR = duration; // 1.5 seconds nominal
|
||||
IWDG->KR = 0xAAAA; // reload
|
||||
IWDG->KR = 0xCCCC; // start
|
||||
}
|
||||
|
||||
// Starts TIMER at 2MHz
|
||||
void init2MhzTimer()
|
||||
{
|
||||
TIMER_2MHz_TIMER->PSC = (PERI1_FREQUENCY * TIMER_MULT_APB1) / 2000000 - 1 ; // 0.5 uS, 2 MHz
|
||||
TIMER_2MHz_TIMER->ARR = 65535;
|
||||
TIMER_2MHz_TIMER->CR2 = 0;
|
||||
TIMER_2MHz_TIMER->CR1 = TIM_CR1_CEN;
|
||||
}
|
||||
|
||||
// Starts TIMER at 200Hz (5ms)
|
||||
void init5msTimer()
|
||||
{
|
||||
INTERRUPT_5MS_TIMER->ARR = 4999 ; // 5mS
|
||||
INTERRUPT_5MS_TIMER->PSC = (PERI1_FREQUENCY * TIMER_MULT_APB1) / 1000000 - 1 ; // 1uS from 30MHz
|
||||
INTERRUPT_5MS_TIMER->CCER = 0 ;
|
||||
INTERRUPT_5MS_TIMER->CCMR1 = 0 ;
|
||||
INTERRUPT_5MS_TIMER->EGR = 0 ;
|
||||
INTERRUPT_5MS_TIMER->CR1 = 5 ;
|
||||
INTERRUPT_5MS_TIMER->DIER |= 1 ;
|
||||
NVIC_EnableIRQ(INTERRUPT_5MS_IRQn) ;
|
||||
NVIC_SetPriority(INTERRUPT_5MS_IRQn, 7);
|
||||
}
|
||||
|
||||
void stop5msTimer( void )
|
||||
{
|
||||
INTERRUPT_5MS_TIMER->CR1 = 0 ; // stop timer
|
||||
NVIC_DisableIRQ(INTERRUPT_5MS_IRQn) ;
|
||||
}
|
||||
|
||||
// TODO use the same than board_sky9x.cpp
|
||||
void interrupt5ms()
|
||||
{
|
||||
static uint32_t pre_scale ; // Used to get 10 Hz counter
|
||||
|
||||
AUDIO_HEARTBEAT();
|
||||
|
||||
#if defined(HAPTIC)
|
||||
HAPTIC_HEARTBEAT();
|
||||
#endif
|
||||
|
||||
if (++pre_scale >= 2) {
|
||||
pre_scale = 0 ;
|
||||
DEBUG_TIMER_START(debugTimerPer10ms);
|
||||
per10ms();
|
||||
DEBUG_TIMER_STOP(debugTimerPer10ms);
|
||||
}
|
||||
|
||||
#if defined(ROTARY_ENCODER_NAVIGATION)
|
||||
checkRotaryEncoder();
|
||||
#endif
|
||||
}
|
||||
|
||||
#if !defined(SIMU)
|
||||
extern "C" void INTERRUPT_5MS_IRQHandler()
|
||||
{
|
||||
INTERRUPT_5MS_TIMER->SR &= ~TIM_SR_UIF ;
|
||||
interrupt5ms() ;
|
||||
DEBUG_INTERRUPT(INT_5MS);
|
||||
}
|
||||
#endif
|
||||
|
||||
#if defined(PCBX9E) && !defined(SIMU)
|
||||
#define PWR_PRESS_DURATION_MIN 200 // 2s
|
||||
#define PWR_PRESS_DURATION_MAX 500 // 5s
|
||||
|
||||
const pm_uchar bmp_startup[] PROGMEM = {
|
||||
#include "startup.lbm"
|
||||
};
|
||||
|
||||
const pm_uchar bmp_lock[] PROGMEM = {
|
||||
#include "lock.lbm"
|
||||
};
|
||||
#endif // defined(PCBX9E) && !defined(SIMU)
|
||||
|
||||
#if defined(PCBX7)
|
||||
void sportUpdateInit()
|
||||
{
|
||||
GPIO_InitTypeDef GPIO_InitStructure;
|
||||
GPIO_InitStructure.GPIO_Pin = SPORT_UPDATE_PWR_GPIO_PIN;
|
||||
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT;
|
||||
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
|
||||
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
|
||||
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP;
|
||||
GPIO_Init(SPORT_UPDATE_PWR_GPIO, &GPIO_InitStructure);
|
||||
}
|
||||
|
||||
void sportUpdatePowerOn()
|
||||
{
|
||||
if (IS_PCBREV_40())
|
||||
GPIO_SetBits(SPORT_UPDATE_PWR_GPIO, SPORT_UPDATE_PWR_GPIO_PIN);
|
||||
else
|
||||
EXTERNAL_MODULE_ON();
|
||||
}
|
||||
|
||||
void sportUpdatePowerOff()
|
||||
{
|
||||
if (IS_PCBREV_40())
|
||||
GPIO_ResetBits(SPORT_UPDATE_PWR_GPIO, SPORT_UPDATE_PWR_GPIO_PIN);
|
||||
else
|
||||
EXTERNAL_MODULE_OFF();
|
||||
}
|
||||
#endif
|
||||
|
||||
void boardInit()
|
||||
{
|
||||
#if !defined(SIMU)
|
||||
RCC_AHB1PeriphClockCmd(PWR_RCC_AHB1Periph | PCBREV_RCC_AHB1Periph | KEYS_RCC_AHB1Periph | LCD_RCC_AHB1Periph | AUDIO_RCC_AHB1Periph | BACKLIGHT_RCC_AHB1Periph | ADC_RCC_AHB1Periph | I2C_RCC_AHB1Periph | SD_RCC_AHB1Periph | HAPTIC_RCC_AHB1Periph | INTMODULE_RCC_AHB1Periph | EXTMODULE_RCC_AHB1Periph | TELEMETRY_RCC_AHB1Periph | SPORT_UPDATE_RCC_AHB1Periph | SERIAL_RCC_AHB1Periph | TRAINER_RCC_AHB1Periph | HEARTBEAT_RCC_AHB1Periph, ENABLE);
|
||||
RCC_APB1PeriphClockCmd(LCD_RCC_APB1Periph | AUDIO_RCC_APB1Periph | BACKLIGHT_RCC_APB1Periph | INTERRUPT_5MS_APB1Periph | TIMER_2MHz_APB1Periph | I2C_RCC_APB1Periph | SD_RCC_APB1Periph | TRAINER_RCC_APB1Periph | TELEMETRY_RCC_APB1Periph | SERIAL_RCC_APB1Periph, ENABLE);
|
||||
RCC_APB2PeriphClockCmd(BACKLIGHT_RCC_APB2Periph | ADC_RCC_APB2Periph | HAPTIC_RCC_APB2Periph | INTMODULE_RCC_APB2Periph | EXTMODULE_RCC_APB2Periph | HEARTBEAT_RCC_APB2Periph, ENABLE);
|
||||
|
||||
#if !defined(PCBX9E)
|
||||
// some X9E boards need that the pwrInit() is moved a little bit later
|
||||
pwrInit();
|
||||
#endif
|
||||
|
||||
#if defined(PCBX7)
|
||||
ledInit();
|
||||
ledGreen();
|
||||
#endif
|
||||
|
||||
keysInit();
|
||||
adcInit();
|
||||
delaysInit();
|
||||
lcdInit(); // delaysInit() must be called before
|
||||
audioInit();
|
||||
init2MhzTimer();
|
||||
init5msTimer();
|
||||
__enable_irq();
|
||||
i2cInit();
|
||||
usbInit();
|
||||
|
||||
#if defined(DEBUG) && !defined(PCBX7)
|
||||
serial2Init(0, 0); // default serial mode (None if DEBUG not defined)
|
||||
TRACE("\nTaranis board started :)");
|
||||
#endif
|
||||
|
||||
#if defined(HAPTIC)
|
||||
hapticInit();
|
||||
#endif
|
||||
|
||||
#if defined(PCBX9E) || defined(PCBX7)
|
||||
bluetoothInit(BLUETOOTH_DEFAULT_BAUDRATE);
|
||||
#endif
|
||||
|
||||
#if defined(DEBUG)
|
||||
DBGMCU_APB1PeriphConfig(DBGMCU_IWDG_STOP|DBGMCU_TIM1_STOP|DBGMCU_TIM2_STOP|DBGMCU_TIM3_STOP|DBGMCU_TIM6_STOP|DBGMCU_TIM8_STOP|DBGMCU_TIM10_STOP|DBGMCU_TIM13_STOP|DBGMCU_TIM14_STOP, ENABLE);
|
||||
#endif
|
||||
|
||||
#if defined(PCBX9E)
|
||||
if (!WAS_RESET_BY_WATCHDOG_OR_SOFTWARE()) {
|
||||
lcdClear();
|
||||
lcdDrawBitmap(76, 2, bmp_lock, 0, 60);
|
||||
lcdRefresh();
|
||||
lcdRefreshWait();
|
||||
|
||||
tmr10ms_t start = get_tmr10ms();
|
||||
tmr10ms_t duration = 0;
|
||||
uint8_t pwr_on = 0;
|
||||
while (pwrPressed()) {
|
||||
duration = get_tmr10ms() - start;
|
||||
if (duration < PWR_PRESS_DURATION_MIN) {
|
||||
unsigned index = duration / (PWR_PRESS_DURATION_MIN / 4);
|
||||
lcdClear();
|
||||
lcdDrawBitmap(76, 2, bmp_startup, index*60, 60);
|
||||
}
|
||||
else if (duration >= PWR_PRESS_DURATION_MAX) {
|
||||
drawSleepBitmap();
|
||||
backlightDisable();
|
||||
}
|
||||
else {
|
||||
if (pwr_on != 1) {
|
||||
pwr_on = 1;
|
||||
pwrInit();
|
||||
backlightInit();
|
||||
haptic.play(15, 3, PLAY_NOW);
|
||||
}
|
||||
}
|
||||
lcdRefresh();
|
||||
lcdRefreshWait();
|
||||
}
|
||||
if (duration < PWR_PRESS_DURATION_MIN || duration >= PWR_PRESS_DURATION_MAX) {
|
||||
boardOff();
|
||||
}
|
||||
}
|
||||
else {
|
||||
pwrInit();
|
||||
backlightInit();
|
||||
}
|
||||
toplcdInit();
|
||||
#else
|
||||
backlightInit();
|
||||
#endif
|
||||
|
||||
#if defined(PCBX7)
|
||||
if (IS_PCBREV_40()) {
|
||||
sportUpdateInit();
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif // !defined(SIMU)
|
||||
}
|
||||
|
||||
void boardOff()
|
||||
{
|
||||
#if defined(PCBX7)
|
||||
ledOff();
|
||||
#endif
|
||||
|
||||
BACKLIGHT_DISABLE();
|
||||
|
||||
#if defined(PCBX9E)
|
||||
toplcdOff();
|
||||
#endif
|
||||
|
||||
#if defined(PCBX9E) || defined(PCBX7)
|
||||
while (pwrPressed()) {
|
||||
wdt_reset();
|
||||
}
|
||||
#endif
|
||||
|
||||
lcdOff();
|
||||
SysTick->CTRL = 0; // turn off systick
|
||||
pwrOff();
|
||||
}
|
||||
|
||||
uint8_t currentTrainerMode = 0xff;
|
||||
|
||||
void checkTrainerSettings()
|
||||
{
|
||||
uint8_t requiredTrainerMode = g_model.trainerMode;
|
||||
if (requiredTrainerMode != currentTrainerMode) {
|
||||
switch (currentTrainerMode) {
|
||||
case TRAINER_MODE_MASTER_TRAINER_JACK:
|
||||
stop_trainer_capture();
|
||||
break;
|
||||
case TRAINER_MODE_SLAVE:
|
||||
stop_trainer_ppm();
|
||||
break;
|
||||
case TRAINER_MODE_MASTER_CPPM_EXTERNAL_MODULE:
|
||||
stop_cppm_on_heartbeat_capture() ;
|
||||
break;
|
||||
case TRAINER_MODE_MASTER_SBUS_EXTERNAL_MODULE:
|
||||
stop_sbus_on_heartbeat_capture() ;
|
||||
break;
|
||||
#if defined(SERIAL2)
|
||||
case TRAINER_MODE_MASTER_BATTERY_COMPARTMENT:
|
||||
serial2Stop();
|
||||
#endif
|
||||
}
|
||||
|
||||
currentTrainerMode = requiredTrainerMode;
|
||||
switch (requiredTrainerMode) {
|
||||
case TRAINER_MODE_SLAVE:
|
||||
init_trainer_ppm();
|
||||
break;
|
||||
case TRAINER_MODE_MASTER_CPPM_EXTERNAL_MODULE:
|
||||
init_cppm_on_heartbeat_capture() ;
|
||||
break;
|
||||
case TRAINER_MODE_MASTER_SBUS_EXTERNAL_MODULE:
|
||||
init_sbus_on_heartbeat_capture() ;
|
||||
break;
|
||||
#if defined(SERIAL2)
|
||||
case TRAINER_MODE_MASTER_BATTERY_COMPARTMENT:
|
||||
if (g_eeGeneral.serial2Mode == UART_MODE_SBUS_TRAINER) {
|
||||
serial2SbusInit();
|
||||
break;
|
||||
}
|
||||
// no break
|
||||
#endif
|
||||
default:
|
||||
// master is default
|
||||
init_trainer_capture();
|
||||
break;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
uint16_t getBatteryVoltage()
|
||||
{
|
||||
int32_t instant_vbat = anaIn(TX_VOLTAGE); // using filtered ADC value on purpose
|
||||
instant_vbat = (instant_vbat * BATT_SCALE * (128 + g_eeGeneral.txVoltageCalibration) ) / 26214;
|
||||
instant_vbat += 20; // add 0.2V because of the diode TODO check if this is needed, but removal will beak existing calibrations!!!
|
||||
return (uint16_t)instant_vbat;
|
||||
}
|
||||
|
||||
Reference in New Issue
Block a user