Review line ending handling (#4820)

* New line end handling rules

* Normalize all the line endings
This commit is contained in:
3djc
2017-04-19 10:54:43 +02:00
committed by Bertrand Songis
parent 189b65b724
commit fa951acf40
397 changed files with 252824 additions and 252713 deletions
@@ -1,105 +1,105 @@
/**
******************************************************************************
* @file system_stm32f2xx.h
* @author MCD Application Team
* @version V1.1.3
* @date 05-March-2012
* @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Header File.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/** @addtogroup CMSIS
* @{
*/
/** @addtogroup stm32f2xx_system
* @{
*/
/**
* @brief Define to prevent recursive inclusion
*/
#ifndef __SYSTEM_STM32F2XX_H
#define __SYSTEM_STM32F2XX_H
#ifdef __cplusplus
extern "C" {
#endif
/** @addtogroup STM32F2xx_System_Includes
* @{
*/
/**
* @}
*/
/** @addtogroup STM32F2xx_System_Exported_types
* @{
*/
extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
/**
* @}
*/
/** @addtogroup STM32F2xx_System_Exported_Constants
* @{
*/
/**
* @}
*/
/** @addtogroup STM32F2xx_System_Exported_Macros
* @{
*/
/**
* @}
*/
/** @addtogroup STM32F2xx_System_Exported_Functions
* @{
*/
extern void SystemInit(void);
extern void SystemCoreClockUpdate(void);
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /*__SYSTEM_STM32F2XX_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
/**
******************************************************************************
* @file system_stm32f2xx.h
* @author MCD Application Team
* @version V1.1.3
* @date 05-March-2012
* @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Header File.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/** @addtogroup CMSIS
* @{
*/
/** @addtogroup stm32f2xx_system
* @{
*/
/**
* @brief Define to prevent recursive inclusion
*/
#ifndef __SYSTEM_STM32F2XX_H
#define __SYSTEM_STM32F2XX_H
#ifdef __cplusplus
extern "C" {
#endif
/** @addtogroup STM32F2xx_System_Includes
* @{
*/
/**
* @}
*/
/** @addtogroup STM32F2xx_System_Exported_types
* @{
*/
extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
/**
* @}
*/
/** @addtogroup STM32F2xx_System_Exported_Constants
* @{
*/
/**
* @}
*/
/** @addtogroup STM32F2xx_System_Exported_Macros
* @{
*/
/**
* @}
*/
/** @addtogroup STM32F2xx_System_Exported_Functions
* @{
*/
extern void SystemInit(void);
extern void SystemCoreClockUpdate(void);
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /*__SYSTEM_STM32F2XX_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
@@ -1,35 +1,35 @@
/* ----------------------------------------------------------------------
* Copyright (C) 2010 ARM Limited. All rights reserved.
*
* $Date: 11. November 2010
* $Revision: V1.0.2
*
* Project: CMSIS DSP Library
* Title: arm_common_tables.h
*
* Description: This file has extern declaration for common tables like Bitreverse, reciprocal etc which are used across different functions
*
* Target Processor: Cortex-M4/Cortex-M3
*
* Version 1.0.2 2010/11/11
* Documentation updated.
*
* Version 1.0.1 2010/10/05
* Production release and review comments incorporated.
*
* Version 1.0.0 2010/09/20
* Production release and review comments incorporated.
* -------------------------------------------------------------------- */
#ifndef _ARM_COMMON_TABLES_H
#define _ARM_COMMON_TABLES_H
#include "arm_math.h"
extern uint16_t armBitRevTable[256];
extern q15_t armRecipTableQ15[64];
extern q31_t armRecipTableQ31[64];
extern const q31_t realCoefAQ31[1024];
extern const q31_t realCoefBQ31[1024];
#endif /* ARM_COMMON_TABLES_H */
/* ----------------------------------------------------------------------
* Copyright (C) 2010 ARM Limited. All rights reserved.
*
* $Date: 11. November 2010
* $Revision: V1.0.2
*
* Project: CMSIS DSP Library
* Title: arm_common_tables.h
*
* Description: This file has extern declaration for common tables like Bitreverse, reciprocal etc which are used across different functions
*
* Target Processor: Cortex-M4/Cortex-M3
*
* Version 1.0.2 2010/11/11
* Documentation updated.
*
* Version 1.0.1 2010/10/05
* Production release and review comments incorporated.
*
* Version 1.0.0 2010/09/20
* Production release and review comments incorporated.
* -------------------------------------------------------------------- */
#ifndef _ARM_COMMON_TABLES_H
#define _ARM_COMMON_TABLES_H
#include "arm_math.h"
extern uint16_t armBitRevTable[256];
extern q15_t armRecipTableQ15[64];
extern q31_t armRecipTableQ31[64];
extern const q31_t realCoefAQ31[1024];
extern const q31_t realCoefBQ31[1024];
#endif /* ARM_COMMON_TABLES_H */
File diff suppressed because it is too large Load Diff
File diff suppressed because it is too large Load Diff
File diff suppressed because it is too large Load Diff
File diff suppressed because it is too large Load Diff
File diff suppressed because it is too large Load Diff
File diff suppressed because it is too large Load Diff
File diff suppressed because it is too large Load Diff
@@ -1,178 +1,178 @@
/**
******************************************************************************
* @file misc.h
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file contains all the functions prototypes for the miscellaneous
* firmware library functions (add-on to CMSIS functions).
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __MISC_H
#define __MISC_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "../../CMSIS/Device/ST/STM32F2xx/Include/stm32f2xx.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @addtogroup MISC
* @{
*/
/* Exported types ------------------------------------------------------------*/
/**
* @brief NVIC Init Structure definition
*/
typedef struct
{
uint8_t NVIC_IRQChannel; /*!< Specifies the IRQ channel to be enabled or disabled.
This parameter can be an enumerator of @ref IRQn_Type
enumeration (For the complete STM32 Devices IRQ Channels
list, please refer to stm32f2xx.h file) */
uint8_t NVIC_IRQChannelPreemptionPriority; /*!< Specifies the pre-emption priority for the IRQ channel
specified in NVIC_IRQChannel. This parameter can be a value
between 0 and 15 as described in the table @ref MISC_NVIC_Priority_Table
A lower priority value indicates a higher priority */
uint8_t NVIC_IRQChannelSubPriority; /*!< Specifies the subpriority level for the IRQ channel specified
in NVIC_IRQChannel. This parameter can be a value
between 0 and 15 as described in the table @ref MISC_NVIC_Priority_Table
A lower priority value indicates a higher priority */
FunctionalState NVIC_IRQChannelCmd; /*!< Specifies whether the IRQ channel defined in NVIC_IRQChannel
will be enabled or disabled.
This parameter can be set either to ENABLE or DISABLE */
} NVIC_InitTypeDef;
/* Exported constants --------------------------------------------------------*/
/** @defgroup MISC_Exported_Constants
* @{
*/
/** @defgroup MISC_Vector_Table_Base
* @{
*/
#define NVIC_VectTab_RAM ((uint32_t)0x20000000)
#define NVIC_VectTab_FLASH ((uint32_t)0x08000000)
#define IS_NVIC_VECTTAB(VECTTAB) (((VECTTAB) == NVIC_VectTab_RAM) || \
((VECTTAB) == NVIC_VectTab_FLASH))
/**
* @}
*/
/** @defgroup MISC_System_Low_Power
* @{
*/
#define NVIC_LP_SEVONPEND ((uint8_t)0x10)
#define NVIC_LP_SLEEPDEEP ((uint8_t)0x04)
#define NVIC_LP_SLEEPONEXIT ((uint8_t)0x02)
#define IS_NVIC_LP(LP) (((LP) == NVIC_LP_SEVONPEND) || \
((LP) == NVIC_LP_SLEEPDEEP) || \
((LP) == NVIC_LP_SLEEPONEXIT))
/**
* @}
*/
/** @defgroup MISC_Preemption_Priority_Group
* @{
*/
#define NVIC_PriorityGroup_0 ((uint32_t)0x700) /*!< 0 bits for pre-emption priority
4 bits for subpriority */
#define NVIC_PriorityGroup_1 ((uint32_t)0x600) /*!< 1 bits for pre-emption priority
3 bits for subpriority */
#define NVIC_PriorityGroup_2 ((uint32_t)0x500) /*!< 2 bits for pre-emption priority
2 bits for subpriority */
#define NVIC_PriorityGroup_3 ((uint32_t)0x400) /*!< 3 bits for pre-emption priority
1 bits for subpriority */
#define NVIC_PriorityGroup_4 ((uint32_t)0x300) /*!< 4 bits for pre-emption priority
0 bits for subpriority */
#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PriorityGroup_0) || \
((GROUP) == NVIC_PriorityGroup_1) || \
((GROUP) == NVIC_PriorityGroup_2) || \
((GROUP) == NVIC_PriorityGroup_3) || \
((GROUP) == NVIC_PriorityGroup_4))
#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10)
#define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10)
#define IS_NVIC_OFFSET(OFFSET) ((OFFSET) < 0x000FFFFF)
/**
* @}
*/
/** @defgroup MISC_SysTick_clock_source
* @{
*/
#define SysTick_CLKSource_HCLK_Div8 ((uint32_t)0xFFFFFFFB)
#define SysTick_CLKSource_HCLK ((uint32_t)0x00000004)
#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SysTick_CLKSource_HCLK) || \
((SOURCE) == SysTick_CLKSource_HCLK_Div8))
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
void NVIC_PriorityGroupConfig(uint32_t NVIC_PriorityGroup);
void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct);
void NVIC_SetVectorTable(uint32_t NVIC_VectTab, uint32_t Offset);
void NVIC_SystemLPConfig(uint8_t LowPowerMode, FunctionalState NewState);
void SysTick_CLKSourceConfig(uint32_t SysTick_CLKSource);
#ifdef __cplusplus
}
#endif
#endif /* __MISC_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
/**
******************************************************************************
* @file misc.h
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file contains all the functions prototypes for the miscellaneous
* firmware library functions (add-on to CMSIS functions).
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __MISC_H
#define __MISC_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "../../CMSIS/Device/ST/STM32F2xx/Include/stm32f2xx.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @addtogroup MISC
* @{
*/
/* Exported types ------------------------------------------------------------*/
/**
* @brief NVIC Init Structure definition
*/
typedef struct
{
uint8_t NVIC_IRQChannel; /*!< Specifies the IRQ channel to be enabled or disabled.
This parameter can be an enumerator of @ref IRQn_Type
enumeration (For the complete STM32 Devices IRQ Channels
list, please refer to stm32f2xx.h file) */
uint8_t NVIC_IRQChannelPreemptionPriority; /*!< Specifies the pre-emption priority for the IRQ channel
specified in NVIC_IRQChannel. This parameter can be a value
between 0 and 15 as described in the table @ref MISC_NVIC_Priority_Table
A lower priority value indicates a higher priority */
uint8_t NVIC_IRQChannelSubPriority; /*!< Specifies the subpriority level for the IRQ channel specified
in NVIC_IRQChannel. This parameter can be a value
between 0 and 15 as described in the table @ref MISC_NVIC_Priority_Table
A lower priority value indicates a higher priority */
FunctionalState NVIC_IRQChannelCmd; /*!< Specifies whether the IRQ channel defined in NVIC_IRQChannel
will be enabled or disabled.
This parameter can be set either to ENABLE or DISABLE */
} NVIC_InitTypeDef;
/* Exported constants --------------------------------------------------------*/
/** @defgroup MISC_Exported_Constants
* @{
*/
/** @defgroup MISC_Vector_Table_Base
* @{
*/
#define NVIC_VectTab_RAM ((uint32_t)0x20000000)
#define NVIC_VectTab_FLASH ((uint32_t)0x08000000)
#define IS_NVIC_VECTTAB(VECTTAB) (((VECTTAB) == NVIC_VectTab_RAM) || \
((VECTTAB) == NVIC_VectTab_FLASH))
/**
* @}
*/
/** @defgroup MISC_System_Low_Power
* @{
*/
#define NVIC_LP_SEVONPEND ((uint8_t)0x10)
#define NVIC_LP_SLEEPDEEP ((uint8_t)0x04)
#define NVIC_LP_SLEEPONEXIT ((uint8_t)0x02)
#define IS_NVIC_LP(LP) (((LP) == NVIC_LP_SEVONPEND) || \
((LP) == NVIC_LP_SLEEPDEEP) || \
((LP) == NVIC_LP_SLEEPONEXIT))
/**
* @}
*/
/** @defgroup MISC_Preemption_Priority_Group
* @{
*/
#define NVIC_PriorityGroup_0 ((uint32_t)0x700) /*!< 0 bits for pre-emption priority
4 bits for subpriority */
#define NVIC_PriorityGroup_1 ((uint32_t)0x600) /*!< 1 bits for pre-emption priority
3 bits for subpriority */
#define NVIC_PriorityGroup_2 ((uint32_t)0x500) /*!< 2 bits for pre-emption priority
2 bits for subpriority */
#define NVIC_PriorityGroup_3 ((uint32_t)0x400) /*!< 3 bits for pre-emption priority
1 bits for subpriority */
#define NVIC_PriorityGroup_4 ((uint32_t)0x300) /*!< 4 bits for pre-emption priority
0 bits for subpriority */
#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PriorityGroup_0) || \
((GROUP) == NVIC_PriorityGroup_1) || \
((GROUP) == NVIC_PriorityGroup_2) || \
((GROUP) == NVIC_PriorityGroup_3) || \
((GROUP) == NVIC_PriorityGroup_4))
#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10)
#define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10)
#define IS_NVIC_OFFSET(OFFSET) ((OFFSET) < 0x000FFFFF)
/**
* @}
*/
/** @defgroup MISC_SysTick_clock_source
* @{
*/
#define SysTick_CLKSource_HCLK_Div8 ((uint32_t)0xFFFFFFFB)
#define SysTick_CLKSource_HCLK ((uint32_t)0x00000004)
#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SysTick_CLKSource_HCLK) || \
((SOURCE) == SysTick_CLKSource_HCLK_Div8))
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
void NVIC_PriorityGroupConfig(uint32_t NVIC_PriorityGroup);
void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct);
void NVIC_SetVectorTable(uint32_t NVIC_VectTab, uint32_t Offset);
void NVIC_SystemLPConfig(uint8_t LowPowerMode, FunctionalState NewState);
void SysTick_CLKSourceConfig(uint32_t SysTick_CLKSource);
#ifdef __cplusplus
}
#endif
#endif /* __MISC_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
@@ -1,83 +1,83 @@
/**
******************************************************************************
* @file stm32f2xx_crc.h
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file contains all the functions prototypes for the CRC firmware
* library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F2xx_CRC_H
#define __STM32F2xx_CRC_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f2xx.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @addtogroup CRC
* @{
*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup CRC_Exported_Constants
* @{
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
void CRC_ResetDR(void);
uint32_t CRC_CalcCRC(uint32_t Data);
uint32_t CRC_CalcBlockCRC(uint32_t pBuffer[], uint32_t BufferLength);
uint32_t CRC_GetCRC(void);
void CRC_SetIDRegister(uint8_t IDValue);
uint8_t CRC_GetIDRegister(void);
#ifdef __cplusplus
}
#endif
#endif /* __STM32F2xx_CRC_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
/**
******************************************************************************
* @file stm32f2xx_crc.h
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file contains all the functions prototypes for the CRC firmware
* library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F2xx_CRC_H
#define __STM32F2xx_CRC_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f2xx.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @addtogroup CRC
* @{
*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup CRC_Exported_Constants
* @{
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
void CRC_ResetDR(void);
uint32_t CRC_CalcCRC(uint32_t Data);
uint32_t CRC_CalcBlockCRC(uint32_t pBuffer[], uint32_t BufferLength);
uint32_t CRC_GetCRC(void);
void CRC_SetIDRegister(uint8_t IDValue);
uint8_t CRC_GetIDRegister(void);
#ifdef __cplusplus
}
#endif
#endif /* __STM32F2xx_CRC_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
@@ -1,344 +1,344 @@
/**
******************************************************************************
* @file stm32f2xx_cryp.h
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file contains all the functions prototypes for the Cryptographic
* processor(CRYP) firmware library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F2xx_CRYP_H
#define __STM32F2xx_CRYP_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f2xx.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @addtogroup CRYP
* @{
*/
/* Exported types ------------------------------------------------------------*/
/**
* @brief CRYP Init structure definition
*/
typedef struct
{
uint16_t CRYP_AlgoDir; /*!< Encrypt or Decrypt. This parameter can be a
value of @ref CRYP_Algorithm_Direction */
uint16_t CRYP_AlgoMode; /*!< TDES-ECB, TDES-CBC, DES-ECB, DES-CBC, AES-ECB,
AES-CBC, AES-CTR, AES-Key. This parameter can be
a value of @ref CRYP_Algorithm_Mode */
uint16_t CRYP_DataType; /*!< 32-bit data, 16-bit data, bit data or bit-string.
This parameter can be a value of @ref CRYP_Data_Type */
uint16_t CRYP_KeySize; /*!< Used only in AES mode only : 128, 192 or 256 bit
key length. This parameter can be a value of
@ref CRYP_Key_Size_for_AES_only */
}CRYP_InitTypeDef;
/**
* @brief CRYP Key(s) structure definition
*/
typedef struct
{
uint32_t CRYP_Key0Left; /*!< Key 0 Left */
uint32_t CRYP_Key0Right; /*!< Key 0 Right */
uint32_t CRYP_Key1Left; /*!< Key 1 left */
uint32_t CRYP_Key1Right; /*!< Key 1 Right */
uint32_t CRYP_Key2Left; /*!< Key 2 left */
uint32_t CRYP_Key2Right; /*!< Key 2 Right */
uint32_t CRYP_Key3Left; /*!< Key 3 left */
uint32_t CRYP_Key3Right; /*!< Key 3 Right */
}CRYP_KeyInitTypeDef;
/**
* @brief CRYP Initialization Vectors (IV) structure definition
*/
typedef struct
{
uint32_t CRYP_IV0Left; /*!< Init Vector 0 Left */
uint32_t CRYP_IV0Right; /*!< Init Vector 0 Right */
uint32_t CRYP_IV1Left; /*!< Init Vector 1 left */
uint32_t CRYP_IV1Right; /*!< Init Vector 1 Right */
}CRYP_IVInitTypeDef;
/**
* @brief CRYP context swapping structure definition
*/
typedef struct
{
/*!< Configuration */
uint32_t CR_bits9to2;
/*!< KEY */
uint32_t CRYP_IV0LR;
uint32_t CRYP_IV0RR;
uint32_t CRYP_IV1LR;
uint32_t CRYP_IV1RR;
/*!< IV */
uint32_t CRYP_K0LR;
uint32_t CRYP_K0RR;
uint32_t CRYP_K1LR;
uint32_t CRYP_K1RR;
uint32_t CRYP_K2LR;
uint32_t CRYP_K2RR;
uint32_t CRYP_K3LR;
uint32_t CRYP_K3RR;
}CRYP_Context;
/* Exported constants --------------------------------------------------------*/
/** @defgroup CRYP_Exported_Constants
* @{
*/
/** @defgroup CRYP_Algorithm_Direction
* @{
*/
#define CRYP_AlgoDir_Encrypt ((uint16_t)0x0000)
#define CRYP_AlgoDir_Decrypt ((uint16_t)0x0004)
#define IS_CRYP_ALGODIR(ALGODIR) (((ALGODIR) == CRYP_AlgoDir_Encrypt) || \
((ALGODIR) == CRYP_AlgoDir_Decrypt))
/**
* @}
*/
/** @defgroup CRYP_Algorithm_Mode
* @{
*/
/*!< TDES Modes */
#define CRYP_AlgoMode_TDES_ECB ((uint16_t)0x0000)
#define CRYP_AlgoMode_TDES_CBC ((uint16_t)0x0008)
/*!< DES Modes */
#define CRYP_AlgoMode_DES_ECB ((uint16_t)0x0010)
#define CRYP_AlgoMode_DES_CBC ((uint16_t)0x0018)
/*!< AES Modes */
#define CRYP_AlgoMode_AES_ECB ((uint16_t)0x0020)
#define CRYP_AlgoMode_AES_CBC ((uint16_t)0x0028)
#define CRYP_AlgoMode_AES_CTR ((uint16_t)0x0030)
#define CRYP_AlgoMode_AES_Key ((uint16_t)0x0038)
#define IS_CRYP_ALGOMODE(ALGOMODE) (((ALGOMODE) == CRYP_AlgoMode_TDES_ECB) || \
((ALGOMODE) == CRYP_AlgoMode_TDES_CBC)|| \
((ALGOMODE) == CRYP_AlgoMode_DES_ECB)|| \
((ALGOMODE) == CRYP_AlgoMode_DES_CBC) || \
((ALGOMODE) == CRYP_AlgoMode_AES_ECB) || \
((ALGOMODE) == CRYP_AlgoMode_AES_CBC) || \
((ALGOMODE) == CRYP_AlgoMode_AES_CTR) || \
((ALGOMODE) == CRYP_AlgoMode_AES_Key))
/**
* @}
*/
/** @defgroup CRYP_Data_Type
* @{
*/
#define CRYP_DataType_32b ((uint16_t)0x0000)
#define CRYP_DataType_16b ((uint16_t)0x0040)
#define CRYP_DataType_8b ((uint16_t)0x0080)
#define CRYP_DataType_1b ((uint16_t)0x00C0)
#define IS_CRYP_DATATYPE(DATATYPE) (((DATATYPE) == CRYP_DataType_32b) || \
((DATATYPE) == CRYP_DataType_16b)|| \
((DATATYPE) == CRYP_DataType_8b)|| \
((DATATYPE) == CRYP_DataType_1b))
/**
* @}
*/
/** @defgroup CRYP_Key_Size_for_AES_only
* @{
*/
#define CRYP_KeySize_128b ((uint16_t)0x0000)
#define CRYP_KeySize_192b ((uint16_t)0x0100)
#define CRYP_KeySize_256b ((uint16_t)0x0200)
#define IS_CRYP_KEYSIZE(KEYSIZE) (((KEYSIZE) == CRYP_KeySize_128b)|| \
((KEYSIZE) == CRYP_KeySize_192b)|| \
((KEYSIZE) == CRYP_KeySize_256b))
/**
* @}
*/
/** @defgroup CRYP_flags_definition
* @{
*/
#define CRYP_FLAG_BUSY ((uint8_t)0x10) /*!< The CRYP core is currently
processing a block of data
or a key preparation (for
AES decryption). */
#define CRYP_FLAG_IFEM ((uint8_t)0x01) /*!< Input Fifo Empty */
#define CRYP_FLAG_IFNF ((uint8_t)0x02) /*!< Input Fifo is Not Full */
#define CRYP_FLAG_INRIS ((uint8_t)0x22) /*!< Raw interrupt pending */
#define CRYP_FLAG_OFNE ((uint8_t)0x04) /*!< Input Fifo service raw
interrupt status */
#define CRYP_FLAG_OFFU ((uint8_t)0x08) /*!< Output Fifo is Full */
#define CRYP_FLAG_OUTRIS ((uint8_t)0x21) /*!< Output Fifo service raw
interrupt status */
#define IS_CRYP_GET_FLAG(FLAG) (((FLAG) == CRYP_FLAG_IFEM) || \
((FLAG) == CRYP_FLAG_IFNF) || \
((FLAG) == CRYP_FLAG_OFNE) || \
((FLAG) == CRYP_FLAG_OFFU) || \
((FLAG) == CRYP_FLAG_BUSY) || \
((FLAG) == CRYP_FLAG_OUTRIS)|| \
((FLAG) == CRYP_FLAG_INRIS))
/**
* @}
*/
/** @defgroup CRYP_interrupts_definition
* @{
*/
#define CRYP_IT_INI ((uint8_t)0x01) /*!< IN Fifo Interrupt */
#define CRYP_IT_OUTI ((uint8_t)0x02) /*!< OUT Fifo Interrupt */
#define IS_CRYP_CONFIG_IT(IT) ((((IT) & (uint8_t)0xFC) == 0x00) && ((IT) != 0x00))
#define IS_CRYP_GET_IT(IT) (((IT) == CRYP_IT_INI) || ((IT) == CRYP_IT_OUTI))
/**
* @}
*/
/** @defgroup CRYP_Encryption_Decryption_modes_definition
* @{
*/
#define MODE_ENCRYPT ((uint8_t)0x01)
#define MODE_DECRYPT ((uint8_t)0x00)
/**
* @}
*/
/** @defgroup CRYP_DMA_transfer_requests
* @{
*/
#define CRYP_DMAReq_DataIN ((uint8_t)0x01)
#define CRYP_DMAReq_DataOUT ((uint8_t)0x02)
#define IS_CRYP_DMAREQ(DMAREQ) ((((DMAREQ) & (uint8_t)0xFC) == 0x00) && ((DMAREQ) != 0x00))
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/* Function used to set the CRYP configuration to the default reset state ****/
void CRYP_DeInit(void);
/* CRYP Initialization and Configuration functions ****************************/
void CRYP_Init(CRYP_InitTypeDef* CRYP_InitStruct);
void CRYP_StructInit(CRYP_InitTypeDef* CRYP_InitStruct);
void CRYP_KeyInit(CRYP_KeyInitTypeDef* CRYP_KeyInitStruct);
void CRYP_KeyStructInit(CRYP_KeyInitTypeDef* CRYP_KeyInitStruct);
void CRYP_IVInit(CRYP_IVInitTypeDef* CRYP_IVInitStruct);
void CRYP_IVStructInit(CRYP_IVInitTypeDef* CRYP_IVInitStruct);
void CRYP_Cmd(FunctionalState NewState);
/* CRYP Data processing functions *********************************************/
void CRYP_DataIn(uint32_t Data);
uint32_t CRYP_DataOut(void);
void CRYP_FIFOFlush(void);
/* CRYP Context swapping functions ********************************************/
ErrorStatus CRYP_SaveContext(CRYP_Context* CRYP_ContextSave,
CRYP_KeyInitTypeDef* CRYP_KeyInitStruct);
void CRYP_RestoreContext(CRYP_Context* CRYP_ContextRestore);
/* CRYP's DMA interface function **********************************************/
void CRYP_DMACmd(uint8_t CRYP_DMAReq, FunctionalState NewState);
/* Interrupts and flags management functions **********************************/
void CRYP_ITConfig(uint8_t CRYP_IT, FunctionalState NewState);
ITStatus CRYP_GetITStatus(uint8_t CRYP_IT);
FlagStatus CRYP_GetFlagStatus(uint8_t CRYP_FLAG);
/* High Level AES functions **************************************************/
ErrorStatus CRYP_AES_ECB(uint8_t Mode,
uint8_t *Key, uint16_t Keysize,
uint8_t *Input, uint32_t Ilength,
uint8_t *Output);
ErrorStatus CRYP_AES_CBC(uint8_t Mode,
uint8_t InitVectors[16],
uint8_t *Key, uint16_t Keysize,
uint8_t *Input, uint32_t Ilength,
uint8_t *Output);
ErrorStatus CRYP_AES_CTR(uint8_t Mode,
uint8_t InitVectors[16],
uint8_t *Key, uint16_t Keysize,
uint8_t *Input, uint32_t Ilength,
uint8_t *Output);
/* High Level TDES functions **************************************************/
ErrorStatus CRYP_TDES_ECB(uint8_t Mode,
uint8_t Key[24],
uint8_t *Input, uint32_t Ilength,
uint8_t *Output);
ErrorStatus CRYP_TDES_CBC(uint8_t Mode,
uint8_t Key[24],
uint8_t InitVectors[8],
uint8_t *Input, uint32_t Ilength,
uint8_t *Output);
/* High Level DES functions **************************************************/
ErrorStatus CRYP_DES_ECB(uint8_t Mode,
uint8_t Key[8],
uint8_t *Input, uint32_t Ilength,
uint8_t *Output);
ErrorStatus CRYP_DES_CBC(uint8_t Mode,
uint8_t Key[8],
uint8_t InitVectors[8],
uint8_t *Input,uint32_t Ilength,
uint8_t *Output);
#ifdef __cplusplus
}
#endif
#endif /*__STM32F2xx_CRYP_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
/**
******************************************************************************
* @file stm32f2xx_cryp.h
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file contains all the functions prototypes for the Cryptographic
* processor(CRYP) firmware library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F2xx_CRYP_H
#define __STM32F2xx_CRYP_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f2xx.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @addtogroup CRYP
* @{
*/
/* Exported types ------------------------------------------------------------*/
/**
* @brief CRYP Init structure definition
*/
typedef struct
{
uint16_t CRYP_AlgoDir; /*!< Encrypt or Decrypt. This parameter can be a
value of @ref CRYP_Algorithm_Direction */
uint16_t CRYP_AlgoMode; /*!< TDES-ECB, TDES-CBC, DES-ECB, DES-CBC, AES-ECB,
AES-CBC, AES-CTR, AES-Key. This parameter can be
a value of @ref CRYP_Algorithm_Mode */
uint16_t CRYP_DataType; /*!< 32-bit data, 16-bit data, bit data or bit-string.
This parameter can be a value of @ref CRYP_Data_Type */
uint16_t CRYP_KeySize; /*!< Used only in AES mode only : 128, 192 or 256 bit
key length. This parameter can be a value of
@ref CRYP_Key_Size_for_AES_only */
}CRYP_InitTypeDef;
/**
* @brief CRYP Key(s) structure definition
*/
typedef struct
{
uint32_t CRYP_Key0Left; /*!< Key 0 Left */
uint32_t CRYP_Key0Right; /*!< Key 0 Right */
uint32_t CRYP_Key1Left; /*!< Key 1 left */
uint32_t CRYP_Key1Right; /*!< Key 1 Right */
uint32_t CRYP_Key2Left; /*!< Key 2 left */
uint32_t CRYP_Key2Right; /*!< Key 2 Right */
uint32_t CRYP_Key3Left; /*!< Key 3 left */
uint32_t CRYP_Key3Right; /*!< Key 3 Right */
}CRYP_KeyInitTypeDef;
/**
* @brief CRYP Initialization Vectors (IV) structure definition
*/
typedef struct
{
uint32_t CRYP_IV0Left; /*!< Init Vector 0 Left */
uint32_t CRYP_IV0Right; /*!< Init Vector 0 Right */
uint32_t CRYP_IV1Left; /*!< Init Vector 1 left */
uint32_t CRYP_IV1Right; /*!< Init Vector 1 Right */
}CRYP_IVInitTypeDef;
/**
* @brief CRYP context swapping structure definition
*/
typedef struct
{
/*!< Configuration */
uint32_t CR_bits9to2;
/*!< KEY */
uint32_t CRYP_IV0LR;
uint32_t CRYP_IV0RR;
uint32_t CRYP_IV1LR;
uint32_t CRYP_IV1RR;
/*!< IV */
uint32_t CRYP_K0LR;
uint32_t CRYP_K0RR;
uint32_t CRYP_K1LR;
uint32_t CRYP_K1RR;
uint32_t CRYP_K2LR;
uint32_t CRYP_K2RR;
uint32_t CRYP_K3LR;
uint32_t CRYP_K3RR;
}CRYP_Context;
/* Exported constants --------------------------------------------------------*/
/** @defgroup CRYP_Exported_Constants
* @{
*/
/** @defgroup CRYP_Algorithm_Direction
* @{
*/
#define CRYP_AlgoDir_Encrypt ((uint16_t)0x0000)
#define CRYP_AlgoDir_Decrypt ((uint16_t)0x0004)
#define IS_CRYP_ALGODIR(ALGODIR) (((ALGODIR) == CRYP_AlgoDir_Encrypt) || \
((ALGODIR) == CRYP_AlgoDir_Decrypt))
/**
* @}
*/
/** @defgroup CRYP_Algorithm_Mode
* @{
*/
/*!< TDES Modes */
#define CRYP_AlgoMode_TDES_ECB ((uint16_t)0x0000)
#define CRYP_AlgoMode_TDES_CBC ((uint16_t)0x0008)
/*!< DES Modes */
#define CRYP_AlgoMode_DES_ECB ((uint16_t)0x0010)
#define CRYP_AlgoMode_DES_CBC ((uint16_t)0x0018)
/*!< AES Modes */
#define CRYP_AlgoMode_AES_ECB ((uint16_t)0x0020)
#define CRYP_AlgoMode_AES_CBC ((uint16_t)0x0028)
#define CRYP_AlgoMode_AES_CTR ((uint16_t)0x0030)
#define CRYP_AlgoMode_AES_Key ((uint16_t)0x0038)
#define IS_CRYP_ALGOMODE(ALGOMODE) (((ALGOMODE) == CRYP_AlgoMode_TDES_ECB) || \
((ALGOMODE) == CRYP_AlgoMode_TDES_CBC)|| \
((ALGOMODE) == CRYP_AlgoMode_DES_ECB)|| \
((ALGOMODE) == CRYP_AlgoMode_DES_CBC) || \
((ALGOMODE) == CRYP_AlgoMode_AES_ECB) || \
((ALGOMODE) == CRYP_AlgoMode_AES_CBC) || \
((ALGOMODE) == CRYP_AlgoMode_AES_CTR) || \
((ALGOMODE) == CRYP_AlgoMode_AES_Key))
/**
* @}
*/
/** @defgroup CRYP_Data_Type
* @{
*/
#define CRYP_DataType_32b ((uint16_t)0x0000)
#define CRYP_DataType_16b ((uint16_t)0x0040)
#define CRYP_DataType_8b ((uint16_t)0x0080)
#define CRYP_DataType_1b ((uint16_t)0x00C0)
#define IS_CRYP_DATATYPE(DATATYPE) (((DATATYPE) == CRYP_DataType_32b) || \
((DATATYPE) == CRYP_DataType_16b)|| \
((DATATYPE) == CRYP_DataType_8b)|| \
((DATATYPE) == CRYP_DataType_1b))
/**
* @}
*/
/** @defgroup CRYP_Key_Size_for_AES_only
* @{
*/
#define CRYP_KeySize_128b ((uint16_t)0x0000)
#define CRYP_KeySize_192b ((uint16_t)0x0100)
#define CRYP_KeySize_256b ((uint16_t)0x0200)
#define IS_CRYP_KEYSIZE(KEYSIZE) (((KEYSIZE) == CRYP_KeySize_128b)|| \
((KEYSIZE) == CRYP_KeySize_192b)|| \
((KEYSIZE) == CRYP_KeySize_256b))
/**
* @}
*/
/** @defgroup CRYP_flags_definition
* @{
*/
#define CRYP_FLAG_BUSY ((uint8_t)0x10) /*!< The CRYP core is currently
processing a block of data
or a key preparation (for
AES decryption). */
#define CRYP_FLAG_IFEM ((uint8_t)0x01) /*!< Input Fifo Empty */
#define CRYP_FLAG_IFNF ((uint8_t)0x02) /*!< Input Fifo is Not Full */
#define CRYP_FLAG_INRIS ((uint8_t)0x22) /*!< Raw interrupt pending */
#define CRYP_FLAG_OFNE ((uint8_t)0x04) /*!< Input Fifo service raw
interrupt status */
#define CRYP_FLAG_OFFU ((uint8_t)0x08) /*!< Output Fifo is Full */
#define CRYP_FLAG_OUTRIS ((uint8_t)0x21) /*!< Output Fifo service raw
interrupt status */
#define IS_CRYP_GET_FLAG(FLAG) (((FLAG) == CRYP_FLAG_IFEM) || \
((FLAG) == CRYP_FLAG_IFNF) || \
((FLAG) == CRYP_FLAG_OFNE) || \
((FLAG) == CRYP_FLAG_OFFU) || \
((FLAG) == CRYP_FLAG_BUSY) || \
((FLAG) == CRYP_FLAG_OUTRIS)|| \
((FLAG) == CRYP_FLAG_INRIS))
/**
* @}
*/
/** @defgroup CRYP_interrupts_definition
* @{
*/
#define CRYP_IT_INI ((uint8_t)0x01) /*!< IN Fifo Interrupt */
#define CRYP_IT_OUTI ((uint8_t)0x02) /*!< OUT Fifo Interrupt */
#define IS_CRYP_CONFIG_IT(IT) ((((IT) & (uint8_t)0xFC) == 0x00) && ((IT) != 0x00))
#define IS_CRYP_GET_IT(IT) (((IT) == CRYP_IT_INI) || ((IT) == CRYP_IT_OUTI))
/**
* @}
*/
/** @defgroup CRYP_Encryption_Decryption_modes_definition
* @{
*/
#define MODE_ENCRYPT ((uint8_t)0x01)
#define MODE_DECRYPT ((uint8_t)0x00)
/**
* @}
*/
/** @defgroup CRYP_DMA_transfer_requests
* @{
*/
#define CRYP_DMAReq_DataIN ((uint8_t)0x01)
#define CRYP_DMAReq_DataOUT ((uint8_t)0x02)
#define IS_CRYP_DMAREQ(DMAREQ) ((((DMAREQ) & (uint8_t)0xFC) == 0x00) && ((DMAREQ) != 0x00))
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/* Function used to set the CRYP configuration to the default reset state ****/
void CRYP_DeInit(void);
/* CRYP Initialization and Configuration functions ****************************/
void CRYP_Init(CRYP_InitTypeDef* CRYP_InitStruct);
void CRYP_StructInit(CRYP_InitTypeDef* CRYP_InitStruct);
void CRYP_KeyInit(CRYP_KeyInitTypeDef* CRYP_KeyInitStruct);
void CRYP_KeyStructInit(CRYP_KeyInitTypeDef* CRYP_KeyInitStruct);
void CRYP_IVInit(CRYP_IVInitTypeDef* CRYP_IVInitStruct);
void CRYP_IVStructInit(CRYP_IVInitTypeDef* CRYP_IVInitStruct);
void CRYP_Cmd(FunctionalState NewState);
/* CRYP Data processing functions *********************************************/
void CRYP_DataIn(uint32_t Data);
uint32_t CRYP_DataOut(void);
void CRYP_FIFOFlush(void);
/* CRYP Context swapping functions ********************************************/
ErrorStatus CRYP_SaveContext(CRYP_Context* CRYP_ContextSave,
CRYP_KeyInitTypeDef* CRYP_KeyInitStruct);
void CRYP_RestoreContext(CRYP_Context* CRYP_ContextRestore);
/* CRYP's DMA interface function **********************************************/
void CRYP_DMACmd(uint8_t CRYP_DMAReq, FunctionalState NewState);
/* Interrupts and flags management functions **********************************/
void CRYP_ITConfig(uint8_t CRYP_IT, FunctionalState NewState);
ITStatus CRYP_GetITStatus(uint8_t CRYP_IT);
FlagStatus CRYP_GetFlagStatus(uint8_t CRYP_FLAG);
/* High Level AES functions **************************************************/
ErrorStatus CRYP_AES_ECB(uint8_t Mode,
uint8_t *Key, uint16_t Keysize,
uint8_t *Input, uint32_t Ilength,
uint8_t *Output);
ErrorStatus CRYP_AES_CBC(uint8_t Mode,
uint8_t InitVectors[16],
uint8_t *Key, uint16_t Keysize,
uint8_t *Input, uint32_t Ilength,
uint8_t *Output);
ErrorStatus CRYP_AES_CTR(uint8_t Mode,
uint8_t InitVectors[16],
uint8_t *Key, uint16_t Keysize,
uint8_t *Input, uint32_t Ilength,
uint8_t *Output);
/* High Level TDES functions **************************************************/
ErrorStatus CRYP_TDES_ECB(uint8_t Mode,
uint8_t Key[24],
uint8_t *Input, uint32_t Ilength,
uint8_t *Output);
ErrorStatus CRYP_TDES_CBC(uint8_t Mode,
uint8_t Key[24],
uint8_t InitVectors[8],
uint8_t *Input, uint32_t Ilength,
uint8_t *Output);
/* High Level DES functions **************************************************/
ErrorStatus CRYP_DES_ECB(uint8_t Mode,
uint8_t Key[8],
uint8_t *Input, uint32_t Ilength,
uint8_t *Output);
ErrorStatus CRYP_DES_CBC(uint8_t Mode,
uint8_t Key[8],
uint8_t InitVectors[8],
uint8_t *Input,uint32_t Ilength,
uint8_t *Output);
#ifdef __cplusplus
}
#endif
#endif /*__STM32F2xx_CRYP_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
@@ -1,304 +1,304 @@
/**
******************************************************************************
* @file stm32f2xx_dac.h
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file contains all the functions prototypes for the DAC firmware
* library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F2xx_DAC_H
#define __STM32F2xx_DAC_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f2xx.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @addtogroup DAC
* @{
*/
/* Exported types ------------------------------------------------------------*/
/**
* @brief DAC Init structure definition
*/
typedef struct
{
uint32_t DAC_Trigger; /*!< Specifies the external trigger for the selected DAC channel.
This parameter can be a value of @ref DAC_trigger_selection */
uint32_t DAC_WaveGeneration; /*!< Specifies whether DAC channel noise waves or triangle waves
are generated, or whether no wave is generated.
This parameter can be a value of @ref DAC_wave_generation */
uint32_t DAC_LFSRUnmask_TriangleAmplitude; /*!< Specifies the LFSR mask for noise wave generation or
the maximum amplitude triangle generation for the DAC channel.
This parameter can be a value of @ref DAC_lfsrunmask_triangleamplitude */
uint32_t DAC_OutputBuffer; /*!< Specifies whether the DAC channel output buffer is enabled or disabled.
This parameter can be a value of @ref DAC_output_buffer */
}DAC_InitTypeDef;
/* Exported constants --------------------------------------------------------*/
/** @defgroup DAC_Exported_Constants
* @{
*/
/** @defgroup DAC_trigger_selection
* @{
*/
#define DAC_Trigger_None ((uint32_t)0x00000000) /*!< Conversion is automatic once the DAC1_DHRxxxx register
has been loaded, and not by external trigger */
#define DAC_Trigger_T2_TRGO ((uint32_t)0x00000024) /*!< TIM2 TRGO selected as external conversion trigger for DAC channel */
#define DAC_Trigger_T4_TRGO ((uint32_t)0x0000002C) /*!< TIM4 TRGO selected as external conversion trigger for DAC channel */
#define DAC_Trigger_T5_TRGO ((uint32_t)0x0000001C) /*!< TIM5 TRGO selected as external conversion trigger for DAC channel */
#define DAC_Trigger_T6_TRGO ((uint32_t)0x00000004) /*!< TIM6 TRGO selected as external conversion trigger for DAC channel */
#define DAC_Trigger_T7_TRGO ((uint32_t)0x00000014) /*!< TIM7 TRGO selected as external conversion trigger for DAC channel */
#define DAC_Trigger_T8_TRGO ((uint32_t)0x0000000C) /*!< TIM8 TRGO selected as external conversion trigger for DAC channel */
#define DAC_Trigger_Ext_IT9 ((uint32_t)0x00000034) /*!< EXTI Line9 event selected as external conversion trigger for DAC channel */
#define DAC_Trigger_Software ((uint32_t)0x0000003C) /*!< Conversion started by software trigger for DAC channel */
#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_Trigger_None) || \
((TRIGGER) == DAC_Trigger_T6_TRGO) || \
((TRIGGER) == DAC_Trigger_T8_TRGO) || \
((TRIGGER) == DAC_Trigger_T7_TRGO) || \
((TRIGGER) == DAC_Trigger_T5_TRGO) || \
((TRIGGER) == DAC_Trigger_T2_TRGO) || \
((TRIGGER) == DAC_Trigger_T4_TRGO) || \
((TRIGGER) == DAC_Trigger_Ext_IT9) || \
((TRIGGER) == DAC_Trigger_Software))
/**
* @}
*/
/** @defgroup DAC_wave_generation
* @{
*/
#define DAC_WaveGeneration_None ((uint32_t)0x00000000)
#define DAC_WaveGeneration_Noise ((uint32_t)0x00000040)
#define DAC_WaveGeneration_Triangle ((uint32_t)0x00000080)
#define IS_DAC_GENERATE_WAVE(WAVE) (((WAVE) == DAC_WaveGeneration_None) || \
((WAVE) == DAC_WaveGeneration_Noise) || \
((WAVE) == DAC_WaveGeneration_Triangle))
/**
* @}
*/
/** @defgroup DAC_lfsrunmask_triangleamplitude
* @{
*/
#define DAC_LFSRUnmask_Bit0 ((uint32_t)0x00000000) /*!< Unmask DAC channel LFSR bit0 for noise wave generation */
#define DAC_LFSRUnmask_Bits1_0 ((uint32_t)0x00000100) /*!< Unmask DAC channel LFSR bit[1:0] for noise wave generation */
#define DAC_LFSRUnmask_Bits2_0 ((uint32_t)0x00000200) /*!< Unmask DAC channel LFSR bit[2:0] for noise wave generation */
#define DAC_LFSRUnmask_Bits3_0 ((uint32_t)0x00000300) /*!< Unmask DAC channel LFSR bit[3:0] for noise wave generation */
#define DAC_LFSRUnmask_Bits4_0 ((uint32_t)0x00000400) /*!< Unmask DAC channel LFSR bit[4:0] for noise wave generation */
#define DAC_LFSRUnmask_Bits5_0 ((uint32_t)0x00000500) /*!< Unmask DAC channel LFSR bit[5:0] for noise wave generation */
#define DAC_LFSRUnmask_Bits6_0 ((uint32_t)0x00000600) /*!< Unmask DAC channel LFSR bit[6:0] for noise wave generation */
#define DAC_LFSRUnmask_Bits7_0 ((uint32_t)0x00000700) /*!< Unmask DAC channel LFSR bit[7:0] for noise wave generation */
#define DAC_LFSRUnmask_Bits8_0 ((uint32_t)0x00000800) /*!< Unmask DAC channel LFSR bit[8:0] for noise wave generation */
#define DAC_LFSRUnmask_Bits9_0 ((uint32_t)0x00000900) /*!< Unmask DAC channel LFSR bit[9:0] for noise wave generation */
#define DAC_LFSRUnmask_Bits10_0 ((uint32_t)0x00000A00) /*!< Unmask DAC channel LFSR bit[10:0] for noise wave generation */
#define DAC_LFSRUnmask_Bits11_0 ((uint32_t)0x00000B00) /*!< Unmask DAC channel LFSR bit[11:0] for noise wave generation */
#define DAC_TriangleAmplitude_1 ((uint32_t)0x00000000) /*!< Select max triangle amplitude of 1 */
#define DAC_TriangleAmplitude_3 ((uint32_t)0x00000100) /*!< Select max triangle amplitude of 3 */
#define DAC_TriangleAmplitude_7 ((uint32_t)0x00000200) /*!< Select max triangle amplitude of 7 */
#define DAC_TriangleAmplitude_15 ((uint32_t)0x00000300) /*!< Select max triangle amplitude of 15 */
#define DAC_TriangleAmplitude_31 ((uint32_t)0x00000400) /*!< Select max triangle amplitude of 31 */
#define DAC_TriangleAmplitude_63 ((uint32_t)0x00000500) /*!< Select max triangle amplitude of 63 */
#define DAC_TriangleAmplitude_127 ((uint32_t)0x00000600) /*!< Select max triangle amplitude of 127 */
#define DAC_TriangleAmplitude_255 ((uint32_t)0x00000700) /*!< Select max triangle amplitude of 255 */
#define DAC_TriangleAmplitude_511 ((uint32_t)0x00000800) /*!< Select max triangle amplitude of 511 */
#define DAC_TriangleAmplitude_1023 ((uint32_t)0x00000900) /*!< Select max triangle amplitude of 1023 */
#define DAC_TriangleAmplitude_2047 ((uint32_t)0x00000A00) /*!< Select max triangle amplitude of 2047 */
#define DAC_TriangleAmplitude_4095 ((uint32_t)0x00000B00) /*!< Select max triangle amplitude of 4095 */
#define IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(VALUE) (((VALUE) == DAC_LFSRUnmask_Bit0) || \
((VALUE) == DAC_LFSRUnmask_Bits1_0) || \
((VALUE) == DAC_LFSRUnmask_Bits2_0) || \
((VALUE) == DAC_LFSRUnmask_Bits3_0) || \
((VALUE) == DAC_LFSRUnmask_Bits4_0) || \
((VALUE) == DAC_LFSRUnmask_Bits5_0) || \
((VALUE) == DAC_LFSRUnmask_Bits6_0) || \
((VALUE) == DAC_LFSRUnmask_Bits7_0) || \
((VALUE) == DAC_LFSRUnmask_Bits8_0) || \
((VALUE) == DAC_LFSRUnmask_Bits9_0) || \
((VALUE) == DAC_LFSRUnmask_Bits10_0) || \
((VALUE) == DAC_LFSRUnmask_Bits11_0) || \
((VALUE) == DAC_TriangleAmplitude_1) || \
((VALUE) == DAC_TriangleAmplitude_3) || \
((VALUE) == DAC_TriangleAmplitude_7) || \
((VALUE) == DAC_TriangleAmplitude_15) || \
((VALUE) == DAC_TriangleAmplitude_31) || \
((VALUE) == DAC_TriangleAmplitude_63) || \
((VALUE) == DAC_TriangleAmplitude_127) || \
((VALUE) == DAC_TriangleAmplitude_255) || \
((VALUE) == DAC_TriangleAmplitude_511) || \
((VALUE) == DAC_TriangleAmplitude_1023) || \
((VALUE) == DAC_TriangleAmplitude_2047) || \
((VALUE) == DAC_TriangleAmplitude_4095))
/**
* @}
*/
/** @defgroup DAC_output_buffer
* @{
*/
#define DAC_OutputBuffer_Enable ((uint32_t)0x00000000)
#define DAC_OutputBuffer_Disable ((uint32_t)0x00000002)
#define IS_DAC_OUTPUT_BUFFER_STATE(STATE) (((STATE) == DAC_OutputBuffer_Enable) || \
((STATE) == DAC_OutputBuffer_Disable))
/**
* @}
*/
/** @defgroup DAC_Channel_selection
* @{
*/
#define DAC_Channel_1 ((uint32_t)0x00000000)
#define DAC_Channel_2 ((uint32_t)0x00000010)
#define IS_DAC_CHANNEL(CHANNEL) (((CHANNEL) == DAC_Channel_1) || \
((CHANNEL) == DAC_Channel_2))
/**
* @}
*/
/** @defgroup DAC_data_alignement
* @{
*/
#define DAC_Align_12b_R ((uint32_t)0x00000000)
#define DAC_Align_12b_L ((uint32_t)0x00000004)
#define DAC_Align_8b_R ((uint32_t)0x00000008)
#define IS_DAC_ALIGN(ALIGN) (((ALIGN) == DAC_Align_12b_R) || \
((ALIGN) == DAC_Align_12b_L) || \
((ALIGN) == DAC_Align_8b_R))
/**
* @}
*/
/** @defgroup DAC_wave_generation
* @{
*/
#define DAC_Wave_Noise ((uint32_t)0x00000040)
#define DAC_Wave_Triangle ((uint32_t)0x00000080)
#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_Wave_Noise) || \
((WAVE) == DAC_Wave_Triangle))
/**
* @}
*/
/** @defgroup DAC_data
* @{
*/
#define IS_DAC_DATA(DATA) ((DATA) <= 0xFFF0)
/**
* @}
*/
/** @defgroup DAC_interrupts_definition
* @{
*/
#define DAC_IT_DMAUDR ((uint32_t)0x00002000)
#define IS_DAC_IT(IT) (((IT) == DAC_IT_DMAUDR))
/**
* @}
*/
/** @defgroup DAC_flags_definition
* @{
*/
#define DAC_FLAG_DMAUDR ((uint32_t)0x00002000)
#define IS_DAC_FLAG(FLAG) (((FLAG) == DAC_FLAG_DMAUDR))
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/* Function used to set the DAC configuration to the default reset state *****/
void DAC_DeInit(void);
/* DAC channels configuration: trigger, output buffer, data format functions */
void DAC_Init(uint32_t DAC_Channel, DAC_InitTypeDef* DAC_InitStruct);
void DAC_StructInit(DAC_InitTypeDef* DAC_InitStruct);
void DAC_Cmd(uint32_t DAC_Channel, FunctionalState NewState);
void DAC_SoftwareTriggerCmd(uint32_t DAC_Channel, FunctionalState NewState);
void DAC_DualSoftwareTriggerCmd(FunctionalState NewState);
void DAC_WaveGenerationCmd(uint32_t DAC_Channel, uint32_t DAC_Wave, FunctionalState NewState);
void DAC_SetChannel1Data(uint32_t DAC_Align, uint16_t Data);
void DAC_SetChannel2Data(uint32_t DAC_Align, uint16_t Data);
void DAC_SetDualChannelData(uint32_t DAC_Align, uint16_t Data2, uint16_t Data1);
uint16_t DAC_GetDataOutputValue(uint32_t DAC_Channel);
/* DMA management functions ***************************************************/
void DAC_DMACmd(uint32_t DAC_Channel, FunctionalState NewState);
/* Interrupts and flags management functions **********************************/
void DAC_ITConfig(uint32_t DAC_Channel, uint32_t DAC_IT, FunctionalState NewState);
FlagStatus DAC_GetFlagStatus(uint32_t DAC_Channel, uint32_t DAC_FLAG);
void DAC_ClearFlag(uint32_t DAC_Channel, uint32_t DAC_FLAG);
ITStatus DAC_GetITStatus(uint32_t DAC_Channel, uint32_t DAC_IT);
void DAC_ClearITPendingBit(uint32_t DAC_Channel, uint32_t DAC_IT);
#ifdef __cplusplus
}
#endif
#endif /*__STM32F2xx_DAC_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
/**
******************************************************************************
* @file stm32f2xx_dac.h
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file contains all the functions prototypes for the DAC firmware
* library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F2xx_DAC_H
#define __STM32F2xx_DAC_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f2xx.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @addtogroup DAC
* @{
*/
/* Exported types ------------------------------------------------------------*/
/**
* @brief DAC Init structure definition
*/
typedef struct
{
uint32_t DAC_Trigger; /*!< Specifies the external trigger for the selected DAC channel.
This parameter can be a value of @ref DAC_trigger_selection */
uint32_t DAC_WaveGeneration; /*!< Specifies whether DAC channel noise waves or triangle waves
are generated, or whether no wave is generated.
This parameter can be a value of @ref DAC_wave_generation */
uint32_t DAC_LFSRUnmask_TriangleAmplitude; /*!< Specifies the LFSR mask for noise wave generation or
the maximum amplitude triangle generation for the DAC channel.
This parameter can be a value of @ref DAC_lfsrunmask_triangleamplitude */
uint32_t DAC_OutputBuffer; /*!< Specifies whether the DAC channel output buffer is enabled or disabled.
This parameter can be a value of @ref DAC_output_buffer */
}DAC_InitTypeDef;
/* Exported constants --------------------------------------------------------*/
/** @defgroup DAC_Exported_Constants
* @{
*/
/** @defgroup DAC_trigger_selection
* @{
*/
#define DAC_Trigger_None ((uint32_t)0x00000000) /*!< Conversion is automatic once the DAC1_DHRxxxx register
has been loaded, and not by external trigger */
#define DAC_Trigger_T2_TRGO ((uint32_t)0x00000024) /*!< TIM2 TRGO selected as external conversion trigger for DAC channel */
#define DAC_Trigger_T4_TRGO ((uint32_t)0x0000002C) /*!< TIM4 TRGO selected as external conversion trigger for DAC channel */
#define DAC_Trigger_T5_TRGO ((uint32_t)0x0000001C) /*!< TIM5 TRGO selected as external conversion trigger for DAC channel */
#define DAC_Trigger_T6_TRGO ((uint32_t)0x00000004) /*!< TIM6 TRGO selected as external conversion trigger for DAC channel */
#define DAC_Trigger_T7_TRGO ((uint32_t)0x00000014) /*!< TIM7 TRGO selected as external conversion trigger for DAC channel */
#define DAC_Trigger_T8_TRGO ((uint32_t)0x0000000C) /*!< TIM8 TRGO selected as external conversion trigger for DAC channel */
#define DAC_Trigger_Ext_IT9 ((uint32_t)0x00000034) /*!< EXTI Line9 event selected as external conversion trigger for DAC channel */
#define DAC_Trigger_Software ((uint32_t)0x0000003C) /*!< Conversion started by software trigger for DAC channel */
#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_Trigger_None) || \
((TRIGGER) == DAC_Trigger_T6_TRGO) || \
((TRIGGER) == DAC_Trigger_T8_TRGO) || \
((TRIGGER) == DAC_Trigger_T7_TRGO) || \
((TRIGGER) == DAC_Trigger_T5_TRGO) || \
((TRIGGER) == DAC_Trigger_T2_TRGO) || \
((TRIGGER) == DAC_Trigger_T4_TRGO) || \
((TRIGGER) == DAC_Trigger_Ext_IT9) || \
((TRIGGER) == DAC_Trigger_Software))
/**
* @}
*/
/** @defgroup DAC_wave_generation
* @{
*/
#define DAC_WaveGeneration_None ((uint32_t)0x00000000)
#define DAC_WaveGeneration_Noise ((uint32_t)0x00000040)
#define DAC_WaveGeneration_Triangle ((uint32_t)0x00000080)
#define IS_DAC_GENERATE_WAVE(WAVE) (((WAVE) == DAC_WaveGeneration_None) || \
((WAVE) == DAC_WaveGeneration_Noise) || \
((WAVE) == DAC_WaveGeneration_Triangle))
/**
* @}
*/
/** @defgroup DAC_lfsrunmask_triangleamplitude
* @{
*/
#define DAC_LFSRUnmask_Bit0 ((uint32_t)0x00000000) /*!< Unmask DAC channel LFSR bit0 for noise wave generation */
#define DAC_LFSRUnmask_Bits1_0 ((uint32_t)0x00000100) /*!< Unmask DAC channel LFSR bit[1:0] for noise wave generation */
#define DAC_LFSRUnmask_Bits2_0 ((uint32_t)0x00000200) /*!< Unmask DAC channel LFSR bit[2:0] for noise wave generation */
#define DAC_LFSRUnmask_Bits3_0 ((uint32_t)0x00000300) /*!< Unmask DAC channel LFSR bit[3:0] for noise wave generation */
#define DAC_LFSRUnmask_Bits4_0 ((uint32_t)0x00000400) /*!< Unmask DAC channel LFSR bit[4:0] for noise wave generation */
#define DAC_LFSRUnmask_Bits5_0 ((uint32_t)0x00000500) /*!< Unmask DAC channel LFSR bit[5:0] for noise wave generation */
#define DAC_LFSRUnmask_Bits6_0 ((uint32_t)0x00000600) /*!< Unmask DAC channel LFSR bit[6:0] for noise wave generation */
#define DAC_LFSRUnmask_Bits7_0 ((uint32_t)0x00000700) /*!< Unmask DAC channel LFSR bit[7:0] for noise wave generation */
#define DAC_LFSRUnmask_Bits8_0 ((uint32_t)0x00000800) /*!< Unmask DAC channel LFSR bit[8:0] for noise wave generation */
#define DAC_LFSRUnmask_Bits9_0 ((uint32_t)0x00000900) /*!< Unmask DAC channel LFSR bit[9:0] for noise wave generation */
#define DAC_LFSRUnmask_Bits10_0 ((uint32_t)0x00000A00) /*!< Unmask DAC channel LFSR bit[10:0] for noise wave generation */
#define DAC_LFSRUnmask_Bits11_0 ((uint32_t)0x00000B00) /*!< Unmask DAC channel LFSR bit[11:0] for noise wave generation */
#define DAC_TriangleAmplitude_1 ((uint32_t)0x00000000) /*!< Select max triangle amplitude of 1 */
#define DAC_TriangleAmplitude_3 ((uint32_t)0x00000100) /*!< Select max triangle amplitude of 3 */
#define DAC_TriangleAmplitude_7 ((uint32_t)0x00000200) /*!< Select max triangle amplitude of 7 */
#define DAC_TriangleAmplitude_15 ((uint32_t)0x00000300) /*!< Select max triangle amplitude of 15 */
#define DAC_TriangleAmplitude_31 ((uint32_t)0x00000400) /*!< Select max triangle amplitude of 31 */
#define DAC_TriangleAmplitude_63 ((uint32_t)0x00000500) /*!< Select max triangle amplitude of 63 */
#define DAC_TriangleAmplitude_127 ((uint32_t)0x00000600) /*!< Select max triangle amplitude of 127 */
#define DAC_TriangleAmplitude_255 ((uint32_t)0x00000700) /*!< Select max triangle amplitude of 255 */
#define DAC_TriangleAmplitude_511 ((uint32_t)0x00000800) /*!< Select max triangle amplitude of 511 */
#define DAC_TriangleAmplitude_1023 ((uint32_t)0x00000900) /*!< Select max triangle amplitude of 1023 */
#define DAC_TriangleAmplitude_2047 ((uint32_t)0x00000A00) /*!< Select max triangle amplitude of 2047 */
#define DAC_TriangleAmplitude_4095 ((uint32_t)0x00000B00) /*!< Select max triangle amplitude of 4095 */
#define IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(VALUE) (((VALUE) == DAC_LFSRUnmask_Bit0) || \
((VALUE) == DAC_LFSRUnmask_Bits1_0) || \
((VALUE) == DAC_LFSRUnmask_Bits2_0) || \
((VALUE) == DAC_LFSRUnmask_Bits3_0) || \
((VALUE) == DAC_LFSRUnmask_Bits4_0) || \
((VALUE) == DAC_LFSRUnmask_Bits5_0) || \
((VALUE) == DAC_LFSRUnmask_Bits6_0) || \
((VALUE) == DAC_LFSRUnmask_Bits7_0) || \
((VALUE) == DAC_LFSRUnmask_Bits8_0) || \
((VALUE) == DAC_LFSRUnmask_Bits9_0) || \
((VALUE) == DAC_LFSRUnmask_Bits10_0) || \
((VALUE) == DAC_LFSRUnmask_Bits11_0) || \
((VALUE) == DAC_TriangleAmplitude_1) || \
((VALUE) == DAC_TriangleAmplitude_3) || \
((VALUE) == DAC_TriangleAmplitude_7) || \
((VALUE) == DAC_TriangleAmplitude_15) || \
((VALUE) == DAC_TriangleAmplitude_31) || \
((VALUE) == DAC_TriangleAmplitude_63) || \
((VALUE) == DAC_TriangleAmplitude_127) || \
((VALUE) == DAC_TriangleAmplitude_255) || \
((VALUE) == DAC_TriangleAmplitude_511) || \
((VALUE) == DAC_TriangleAmplitude_1023) || \
((VALUE) == DAC_TriangleAmplitude_2047) || \
((VALUE) == DAC_TriangleAmplitude_4095))
/**
* @}
*/
/** @defgroup DAC_output_buffer
* @{
*/
#define DAC_OutputBuffer_Enable ((uint32_t)0x00000000)
#define DAC_OutputBuffer_Disable ((uint32_t)0x00000002)
#define IS_DAC_OUTPUT_BUFFER_STATE(STATE) (((STATE) == DAC_OutputBuffer_Enable) || \
((STATE) == DAC_OutputBuffer_Disable))
/**
* @}
*/
/** @defgroup DAC_Channel_selection
* @{
*/
#define DAC_Channel_1 ((uint32_t)0x00000000)
#define DAC_Channel_2 ((uint32_t)0x00000010)
#define IS_DAC_CHANNEL(CHANNEL) (((CHANNEL) == DAC_Channel_1) || \
((CHANNEL) == DAC_Channel_2))
/**
* @}
*/
/** @defgroup DAC_data_alignement
* @{
*/
#define DAC_Align_12b_R ((uint32_t)0x00000000)
#define DAC_Align_12b_L ((uint32_t)0x00000004)
#define DAC_Align_8b_R ((uint32_t)0x00000008)
#define IS_DAC_ALIGN(ALIGN) (((ALIGN) == DAC_Align_12b_R) || \
((ALIGN) == DAC_Align_12b_L) || \
((ALIGN) == DAC_Align_8b_R))
/**
* @}
*/
/** @defgroup DAC_wave_generation
* @{
*/
#define DAC_Wave_Noise ((uint32_t)0x00000040)
#define DAC_Wave_Triangle ((uint32_t)0x00000080)
#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_Wave_Noise) || \
((WAVE) == DAC_Wave_Triangle))
/**
* @}
*/
/** @defgroup DAC_data
* @{
*/
#define IS_DAC_DATA(DATA) ((DATA) <= 0xFFF0)
/**
* @}
*/
/** @defgroup DAC_interrupts_definition
* @{
*/
#define DAC_IT_DMAUDR ((uint32_t)0x00002000)
#define IS_DAC_IT(IT) (((IT) == DAC_IT_DMAUDR))
/**
* @}
*/
/** @defgroup DAC_flags_definition
* @{
*/
#define DAC_FLAG_DMAUDR ((uint32_t)0x00002000)
#define IS_DAC_FLAG(FLAG) (((FLAG) == DAC_FLAG_DMAUDR))
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/* Function used to set the DAC configuration to the default reset state *****/
void DAC_DeInit(void);
/* DAC channels configuration: trigger, output buffer, data format functions */
void DAC_Init(uint32_t DAC_Channel, DAC_InitTypeDef* DAC_InitStruct);
void DAC_StructInit(DAC_InitTypeDef* DAC_InitStruct);
void DAC_Cmd(uint32_t DAC_Channel, FunctionalState NewState);
void DAC_SoftwareTriggerCmd(uint32_t DAC_Channel, FunctionalState NewState);
void DAC_DualSoftwareTriggerCmd(FunctionalState NewState);
void DAC_WaveGenerationCmd(uint32_t DAC_Channel, uint32_t DAC_Wave, FunctionalState NewState);
void DAC_SetChannel1Data(uint32_t DAC_Align, uint16_t Data);
void DAC_SetChannel2Data(uint32_t DAC_Align, uint16_t Data);
void DAC_SetDualChannelData(uint32_t DAC_Align, uint16_t Data2, uint16_t Data1);
uint16_t DAC_GetDataOutputValue(uint32_t DAC_Channel);
/* DMA management functions ***************************************************/
void DAC_DMACmd(uint32_t DAC_Channel, FunctionalState NewState);
/* Interrupts and flags management functions **********************************/
void DAC_ITConfig(uint32_t DAC_Channel, uint32_t DAC_IT, FunctionalState NewState);
FlagStatus DAC_GetFlagStatus(uint32_t DAC_Channel, uint32_t DAC_FLAG);
void DAC_ClearFlag(uint32_t DAC_Channel, uint32_t DAC_FLAG);
ITStatus DAC_GetITStatus(uint32_t DAC_Channel, uint32_t DAC_IT);
void DAC_ClearITPendingBit(uint32_t DAC_Channel, uint32_t DAC_IT);
#ifdef __cplusplus
}
#endif
#endif /*__STM32F2xx_DAC_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
@@ -1,109 +1,109 @@
/**
******************************************************************************
* @file stm32f2xx_dbgmcu.h
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file contains all the functions prototypes for the DBGMCU firmware library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F2xx_DBGMCU_H
#define __STM32F2xx_DBGMCU_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "../../CMSIS/Device/ST/STM32F2xx/Include/stm32f2xx.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @addtogroup DBGMCU
* @{
*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup DBGMCU_Exported_Constants
* @{
*/
#define DBGMCU_SLEEP ((uint32_t)0x00000001)
#define DBGMCU_STOP ((uint32_t)0x00000002)
#define DBGMCU_STANDBY ((uint32_t)0x00000004)
#define IS_DBGMCU_PERIPH(PERIPH) ((((PERIPH) & 0xFFFFFFF8) == 0x00) && ((PERIPH) != 0x00))
#define DBGMCU_TIM2_STOP ((uint32_t)0x00000001)
#define DBGMCU_TIM3_STOP ((uint32_t)0x00000002)
#define DBGMCU_TIM4_STOP ((uint32_t)0x00000004)
#define DBGMCU_TIM5_STOP ((uint32_t)0x00000008)
#define DBGMCU_TIM6_STOP ((uint32_t)0x00000010)
#define DBGMCU_TIM7_STOP ((uint32_t)0x00000020)
#define DBGMCU_TIM12_STOP ((uint32_t)0x00000040)
#define DBGMCU_TIM13_STOP ((uint32_t)0x00000080)
#define DBGMCU_TIM14_STOP ((uint32_t)0x00000100)
#define DBGMCU_RTC_STOP ((uint32_t)0x00000400)
#define DBGMCU_WWDG_STOP ((uint32_t)0x00000800)
#define DBGMCU_IWDG_STOP ((uint32_t)0x00001000)
#define DBGMCU_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00200000)
#define DBGMCU_I2C2_SMBUS_TIMEOUT ((uint32_t)0x00400000)
#define DBGMCU_I2C3_SMBUS_TIMEOUT ((uint32_t)0x00800000)
#define DBGMCU_CAN1_STOP ((uint32_t)0x02000000)
#define DBGMCU_CAN2_STOP ((uint32_t)0x04000000)
#define IS_DBGMCU_APB1PERIPH(PERIPH) ((((PERIPH) & 0xF91FE200) == 0x00) && ((PERIPH) != 0x00))
#define DBGMCU_TIM1_STOP ((uint32_t)0x00000001)
#define DBGMCU_TIM8_STOP ((uint32_t)0x00000002)
#define DBGMCU_TIM9_STOP ((uint32_t)0x00010000)
#define DBGMCU_TIM10_STOP ((uint32_t)0x00020000)
#define DBGMCU_TIM11_STOP ((uint32_t)0x00040000)
#define IS_DBGMCU_APB2PERIPH(PERIPH) ((((PERIPH) & 0xFFF8FFFC) == 0x00) && ((PERIPH) != 0x00))
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
uint32_t DBGMCU_GetREVID(void);
uint32_t DBGMCU_GetDEVID(void);
void DBGMCU_Config(uint32_t DBGMCU_Periph, FunctionalState NewState);
void DBGMCU_APB1PeriphConfig(uint32_t DBGMCU_Periph, FunctionalState NewState);
void DBGMCU_APB2PeriphConfig(uint32_t DBGMCU_Periph, FunctionalState NewState);
#ifdef __cplusplus
}
#endif
#endif /* __STM32F2xx_DBGMCU_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
/**
******************************************************************************
* @file stm32f2xx_dbgmcu.h
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file contains all the functions prototypes for the DBGMCU firmware library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F2xx_DBGMCU_H
#define __STM32F2xx_DBGMCU_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "../../CMSIS/Device/ST/STM32F2xx/Include/stm32f2xx.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @addtogroup DBGMCU
* @{
*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup DBGMCU_Exported_Constants
* @{
*/
#define DBGMCU_SLEEP ((uint32_t)0x00000001)
#define DBGMCU_STOP ((uint32_t)0x00000002)
#define DBGMCU_STANDBY ((uint32_t)0x00000004)
#define IS_DBGMCU_PERIPH(PERIPH) ((((PERIPH) & 0xFFFFFFF8) == 0x00) && ((PERIPH) != 0x00))
#define DBGMCU_TIM2_STOP ((uint32_t)0x00000001)
#define DBGMCU_TIM3_STOP ((uint32_t)0x00000002)
#define DBGMCU_TIM4_STOP ((uint32_t)0x00000004)
#define DBGMCU_TIM5_STOP ((uint32_t)0x00000008)
#define DBGMCU_TIM6_STOP ((uint32_t)0x00000010)
#define DBGMCU_TIM7_STOP ((uint32_t)0x00000020)
#define DBGMCU_TIM12_STOP ((uint32_t)0x00000040)
#define DBGMCU_TIM13_STOP ((uint32_t)0x00000080)
#define DBGMCU_TIM14_STOP ((uint32_t)0x00000100)
#define DBGMCU_RTC_STOP ((uint32_t)0x00000400)
#define DBGMCU_WWDG_STOP ((uint32_t)0x00000800)
#define DBGMCU_IWDG_STOP ((uint32_t)0x00001000)
#define DBGMCU_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00200000)
#define DBGMCU_I2C2_SMBUS_TIMEOUT ((uint32_t)0x00400000)
#define DBGMCU_I2C3_SMBUS_TIMEOUT ((uint32_t)0x00800000)
#define DBGMCU_CAN1_STOP ((uint32_t)0x02000000)
#define DBGMCU_CAN2_STOP ((uint32_t)0x04000000)
#define IS_DBGMCU_APB1PERIPH(PERIPH) ((((PERIPH) & 0xF91FE200) == 0x00) && ((PERIPH) != 0x00))
#define DBGMCU_TIM1_STOP ((uint32_t)0x00000001)
#define DBGMCU_TIM8_STOP ((uint32_t)0x00000002)
#define DBGMCU_TIM9_STOP ((uint32_t)0x00010000)
#define DBGMCU_TIM10_STOP ((uint32_t)0x00020000)
#define DBGMCU_TIM11_STOP ((uint32_t)0x00040000)
#define IS_DBGMCU_APB2PERIPH(PERIPH) ((((PERIPH) & 0xFFF8FFFC) == 0x00) && ((PERIPH) != 0x00))
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
uint32_t DBGMCU_GetREVID(void);
uint32_t DBGMCU_GetDEVID(void);
void DBGMCU_Config(uint32_t DBGMCU_Periph, FunctionalState NewState);
void DBGMCU_APB1PeriphConfig(uint32_t DBGMCU_Periph, FunctionalState NewState);
void DBGMCU_APB2PeriphConfig(uint32_t DBGMCU_Periph, FunctionalState NewState);
#ifdef __cplusplus
}
#endif
#endif /* __STM32F2xx_DBGMCU_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
@@ -1,312 +1,312 @@
/**
******************************************************************************
* @file stm32f2xx_dcmi.h
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file contains all the functions prototypes for the DCMI firmware library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F2xx_DCMI_H
#define __STM32F2xx_DCMI_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f2xx.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @addtogroup DCMI
* @{
*/
/* Exported types ------------------------------------------------------------*/
/**
* @brief DCMI Init structure definition
*/
typedef struct
{
uint16_t DCMI_CaptureMode; /*!< Specifies the Capture Mode: Continuous or Snapshot.
This parameter can be a value of @ref DCMI_Capture_Mode */
uint16_t DCMI_SynchroMode; /*!< Specifies the Synchronization Mode: Hardware or Embedded.
This parameter can be a value of @ref DCMI_Synchronization_Mode */
uint16_t DCMI_PCKPolarity; /*!< Specifies the Pixel clock polarity: Falling or Rising.
This parameter can be a value of @ref DCMI_PIXCK_Polarity */
uint16_t DCMI_VSPolarity; /*!< Specifies the Vertical synchronization polarity: High or Low.
This parameter can be a value of @ref DCMI_VSYNC_Polarity */
uint16_t DCMI_HSPolarity; /*!< Specifies the Horizontal synchronization polarity: High or Low.
This parameter can be a value of @ref DCMI_HSYNC_Polarity */
uint16_t DCMI_CaptureRate; /*!< Specifies the frequency of frame capture: All, 1/2 or 1/4.
This parameter can be a value of @ref DCMI_Capture_Rate */
uint16_t DCMI_ExtendedDataMode; /*!< Specifies the data width: 8-bit, 10-bit, 12-bit or 14-bit.
This parameter can be a value of @ref DCMI_Extended_Data_Mode */
} DCMI_InitTypeDef;
/**
* @brief DCMI CROP Init structure definition
*/
typedef struct
{
uint16_t DCMI_VerticalStartLine; /*!< Specifies the Vertical start line count from which the image capture
will start. This parameter can be a value between 0x00 and 0x1FFF */
uint16_t DCMI_HorizontalOffsetCount; /*!< Specifies the number of pixel clocks to count before starting a capture.
This parameter can be a value between 0x00 and 0x3FFF */
uint16_t DCMI_VerticalLineCount; /*!< Specifies the number of lines to be captured from the starting point.
This parameter can be a value between 0x00 and 0x3FFF */
uint16_t DCMI_CaptureCount; /*!< Specifies the number of pixel clocks to be captured from the starting
point on the same line.
This parameter can be a value between 0x00 and 0x3FFF */
} DCMI_CROPInitTypeDef;
/**
* @brief DCMI Embedded Synchronisation CODE Init structure definition
*/
typedef struct
{
uint8_t DCMI_FrameStartCode; /*!< Specifies the code of the frame start delimiter. */
uint8_t DCMI_LineStartCode; /*!< Specifies the code of the line start delimiter. */
uint8_t DCMI_LineEndCode; /*!< Specifies the code of the line end delimiter. */
uint8_t DCMI_FrameEndCode; /*!< Specifies the code of the frame end delimiter. */
} DCMI_CodesInitTypeDef;
/* Exported constants --------------------------------------------------------*/
/** @defgroup DCMI_Exported_Constants
* @{
*/
/** @defgroup DCMI_Capture_Mode
* @{
*/
#define DCMI_CaptureMode_Continuous ((uint16_t)0x0000) /*!< The received data are transferred continuously
into the destination memory through the DMA */
#define DCMI_CaptureMode_SnapShot ((uint16_t)0x0002) /*!< Once activated, the interface waits for the start of
frame and then transfers a single frame through the DMA */
#define IS_DCMI_CAPTURE_MODE(MODE)(((MODE) == DCMI_CaptureMode_Continuous) || \
((MODE) == DCMI_CaptureMode_SnapShot))
/**
* @}
*/
/** @defgroup DCMI_Synchronization_Mode
* @{
*/
#define DCMI_SynchroMode_Hardware ((uint16_t)0x0000) /*!< Hardware synchronization data capture (frame/line start/stop)
is synchronized with the HSYNC/VSYNC signals */
#define DCMI_SynchroMode_Embedded ((uint16_t)0x0010) /*!< Embedded synchronization data capture is synchronized with
synchronization codes embedded in the data flow */
#define IS_DCMI_SYNCHRO(MODE)(((MODE) == DCMI_SynchroMode_Hardware) || \
((MODE) == DCMI_SynchroMode_Embedded))
/**
* @}
*/
/** @defgroup DCMI_PIXCK_Polarity
* @{
*/
#define DCMI_PCKPolarity_Falling ((uint16_t)0x0000) /*!< Pixel clock active on Falling edge */
#define DCMI_PCKPolarity_Rising ((uint16_t)0x0020) /*!< Pixel clock active on Rising edge */
#define IS_DCMI_PCKPOLARITY(POLARITY)(((POLARITY) == DCMI_PCKPolarity_Falling) || \
((POLARITY) == DCMI_PCKPolarity_Rising))
/**
* @}
*/
/** @defgroup DCMI_VSYNC_Polarity
* @{
*/
#define DCMI_VSPolarity_Low ((uint16_t)0x0000) /*!< Vertical synchronization active Low */
#define DCMI_VSPolarity_High ((uint16_t)0x0080) /*!< Vertical synchronization active High */
#define IS_DCMI_VSPOLARITY(POLARITY)(((POLARITY) == DCMI_VSPolarity_Low) || \
((POLARITY) == DCMI_VSPolarity_High))
/**
* @}
*/
/** @defgroup DCMI_HSYNC_Polarity
* @{
*/
#define DCMI_HSPolarity_Low ((uint16_t)0x0000) /*!< Horizontal synchronization active Low */
#define DCMI_HSPolarity_High ((uint16_t)0x0040) /*!< Horizontal synchronization active High */
#define IS_DCMI_HSPOLARITY(POLARITY)(((POLARITY) == DCMI_HSPolarity_Low) || \
((POLARITY) == DCMI_HSPolarity_High))
/**
* @}
*/
/** @defgroup DCMI_Capture_Rate
* @{
*/
#define DCMI_CaptureRate_All_Frame ((uint16_t)0x0000) /*!< All frames are captured */
#define DCMI_CaptureRate_1of2_Frame ((uint16_t)0x0100) /*!< Every alternate frame captured */
#define DCMI_CaptureRate_1of4_Frame ((uint16_t)0x0200) /*!< One frame in 4 frames captured */
#define IS_DCMI_CAPTURE_RATE(RATE) (((RATE) == DCMI_CaptureRate_All_Frame) || \
((RATE) == DCMI_CaptureRate_1of2_Frame) ||\
((RATE) == DCMI_CaptureRate_1of4_Frame))
/**
* @}
*/
/** @defgroup DCMI_Extended_Data_Mode
* @{
*/
#define DCMI_ExtendedDataMode_8b ((uint16_t)0x0000) /*!< Interface captures 8-bit data on every pixel clock */
#define DCMI_ExtendedDataMode_10b ((uint16_t)0x0400) /*!< Interface captures 10-bit data on every pixel clock */
#define DCMI_ExtendedDataMode_12b ((uint16_t)0x0800) /*!< Interface captures 12-bit data on every pixel clock */
#define DCMI_ExtendedDataMode_14b ((uint16_t)0x0C00) /*!< Interface captures 14-bit data on every pixel clock */
#define IS_DCMI_EXTENDED_DATA(DATA)(((DATA) == DCMI_ExtendedDataMode_8b) || \
((DATA) == DCMI_ExtendedDataMode_10b) ||\
((DATA) == DCMI_ExtendedDataMode_12b) ||\
((DATA) == DCMI_ExtendedDataMode_14b))
/**
* @}
*/
/** @defgroup DCMI_interrupt_sources
* @{
*/
#define DCMI_IT_FRAME ((uint16_t)0x0001)
#define DCMI_IT_OVF ((uint16_t)0x0002)
#define DCMI_IT_ERR ((uint16_t)0x0004)
#define DCMI_IT_VSYNC ((uint16_t)0x0008)
#define DCMI_IT_LINE ((uint16_t)0x0010)
#define IS_DCMI_CONFIG_IT(IT) ((((IT) & (uint16_t)0xFFE0) == 0x0000) && ((IT) != 0x0000))
#define IS_DCMI_GET_IT(IT) (((IT) == DCMI_IT_FRAME) || \
((IT) == DCMI_IT_OVF) || \
((IT) == DCMI_IT_ERR) || \
((IT) == DCMI_IT_VSYNC) || \
((IT) == DCMI_IT_LINE))
/**
* @}
*/
/** @defgroup DCMI_Flags
* @{
*/
/**
* @brief DCMI SR register
*/
#define DCMI_FLAG_HSYNC ((uint16_t)0x2001)
#define DCMI_FLAG_VSYNC ((uint16_t)0x2002)
#define DCMI_FLAG_FNE ((uint16_t)0x2004)
/**
* @brief DCMI RISR register
*/
#define DCMI_FLAG_FRAMERI ((uint16_t)0x0001)
#define DCMI_FLAG_OVFRI ((uint16_t)0x0002)
#define DCMI_FLAG_ERRRI ((uint16_t)0x0004)
#define DCMI_FLAG_VSYNCRI ((uint16_t)0x0008)
#define DCMI_FLAG_LINERI ((uint16_t)0x0010)
/**
* @brief DCMI MISR register
*/
#define DCMI_FLAG_FRAMEMI ((uint16_t)0x1001)
#define DCMI_FLAG_OVFMI ((uint16_t)0x1002)
#define DCMI_FLAG_ERRMI ((uint16_t)0x1004)
#define DCMI_FLAG_VSYNCMI ((uint16_t)0x1008)
#define DCMI_FLAG_LINEMI ((uint16_t)0x1010)
#define IS_DCMI_GET_FLAG(FLAG) (((FLAG) == DCMI_FLAG_HSYNC) || \
((FLAG) == DCMI_FLAG_VSYNC) || \
((FLAG) == DCMI_FLAG_FNE) || \
((FLAG) == DCMI_FLAG_FRAMERI) || \
((FLAG) == DCMI_FLAG_OVFRI) || \
((FLAG) == DCMI_FLAG_ERRRI) || \
((FLAG) == DCMI_FLAG_VSYNCRI) || \
((FLAG) == DCMI_FLAG_LINERI) || \
((FLAG) == DCMI_FLAG_FRAMEMI) || \
((FLAG) == DCMI_FLAG_OVFMI) || \
((FLAG) == DCMI_FLAG_ERRMI) || \
((FLAG) == DCMI_FLAG_VSYNCMI) || \
((FLAG) == DCMI_FLAG_LINEMI))
#define IS_DCMI_CLEAR_FLAG(FLAG) ((((FLAG) & (uint16_t)0xFFE0) == 0x0000) && ((FLAG) != 0x0000))
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/* Function used to set the DCMI configuration to the default reset state ****/
void DCMI_DeInit(void);
/* Initialization and Configuration functions *********************************/
void DCMI_Init(DCMI_InitTypeDef* DCMI_InitStruct);
void DCMI_StructInit(DCMI_InitTypeDef* DCMI_InitStruct);
void DCMI_CROPConfig(DCMI_CROPInitTypeDef* DCMI_CROPInitStruct);
void DCMI_CROPCmd(FunctionalState NewState);
void DCMI_SetEmbeddedSynchroCodes(DCMI_CodesInitTypeDef* DCMI_CodesInitStruct);
void DCMI_JPEGCmd(FunctionalState NewState);
/* Image capture functions ****************************************************/
void DCMI_Cmd(FunctionalState NewState);
void DCMI_CaptureCmd(FunctionalState NewState);
uint32_t DCMI_ReadData(void);
/* Interrupts and flags management functions **********************************/
void DCMI_ITConfig(uint16_t DCMI_IT, FunctionalState NewState);
FlagStatus DCMI_GetFlagStatus(uint16_t DCMI_FLAG);
void DCMI_ClearFlag(uint16_t DCMI_FLAG);
ITStatus DCMI_GetITStatus(uint16_t DCMI_IT);
void DCMI_ClearITPendingBit(uint16_t DCMI_IT);
#ifdef __cplusplus
}
#endif
#endif /*__STM32F2xx_DCMI_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
/**
******************************************************************************
* @file stm32f2xx_dcmi.h
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file contains all the functions prototypes for the DCMI firmware library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F2xx_DCMI_H
#define __STM32F2xx_DCMI_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f2xx.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @addtogroup DCMI
* @{
*/
/* Exported types ------------------------------------------------------------*/
/**
* @brief DCMI Init structure definition
*/
typedef struct
{
uint16_t DCMI_CaptureMode; /*!< Specifies the Capture Mode: Continuous or Snapshot.
This parameter can be a value of @ref DCMI_Capture_Mode */
uint16_t DCMI_SynchroMode; /*!< Specifies the Synchronization Mode: Hardware or Embedded.
This parameter can be a value of @ref DCMI_Synchronization_Mode */
uint16_t DCMI_PCKPolarity; /*!< Specifies the Pixel clock polarity: Falling or Rising.
This parameter can be a value of @ref DCMI_PIXCK_Polarity */
uint16_t DCMI_VSPolarity; /*!< Specifies the Vertical synchronization polarity: High or Low.
This parameter can be a value of @ref DCMI_VSYNC_Polarity */
uint16_t DCMI_HSPolarity; /*!< Specifies the Horizontal synchronization polarity: High or Low.
This parameter can be a value of @ref DCMI_HSYNC_Polarity */
uint16_t DCMI_CaptureRate; /*!< Specifies the frequency of frame capture: All, 1/2 or 1/4.
This parameter can be a value of @ref DCMI_Capture_Rate */
uint16_t DCMI_ExtendedDataMode; /*!< Specifies the data width: 8-bit, 10-bit, 12-bit or 14-bit.
This parameter can be a value of @ref DCMI_Extended_Data_Mode */
} DCMI_InitTypeDef;
/**
* @brief DCMI CROP Init structure definition
*/
typedef struct
{
uint16_t DCMI_VerticalStartLine; /*!< Specifies the Vertical start line count from which the image capture
will start. This parameter can be a value between 0x00 and 0x1FFF */
uint16_t DCMI_HorizontalOffsetCount; /*!< Specifies the number of pixel clocks to count before starting a capture.
This parameter can be a value between 0x00 and 0x3FFF */
uint16_t DCMI_VerticalLineCount; /*!< Specifies the number of lines to be captured from the starting point.
This parameter can be a value between 0x00 and 0x3FFF */
uint16_t DCMI_CaptureCount; /*!< Specifies the number of pixel clocks to be captured from the starting
point on the same line.
This parameter can be a value between 0x00 and 0x3FFF */
} DCMI_CROPInitTypeDef;
/**
* @brief DCMI Embedded Synchronisation CODE Init structure definition
*/
typedef struct
{
uint8_t DCMI_FrameStartCode; /*!< Specifies the code of the frame start delimiter. */
uint8_t DCMI_LineStartCode; /*!< Specifies the code of the line start delimiter. */
uint8_t DCMI_LineEndCode; /*!< Specifies the code of the line end delimiter. */
uint8_t DCMI_FrameEndCode; /*!< Specifies the code of the frame end delimiter. */
} DCMI_CodesInitTypeDef;
/* Exported constants --------------------------------------------------------*/
/** @defgroup DCMI_Exported_Constants
* @{
*/
/** @defgroup DCMI_Capture_Mode
* @{
*/
#define DCMI_CaptureMode_Continuous ((uint16_t)0x0000) /*!< The received data are transferred continuously
into the destination memory through the DMA */
#define DCMI_CaptureMode_SnapShot ((uint16_t)0x0002) /*!< Once activated, the interface waits for the start of
frame and then transfers a single frame through the DMA */
#define IS_DCMI_CAPTURE_MODE(MODE)(((MODE) == DCMI_CaptureMode_Continuous) || \
((MODE) == DCMI_CaptureMode_SnapShot))
/**
* @}
*/
/** @defgroup DCMI_Synchronization_Mode
* @{
*/
#define DCMI_SynchroMode_Hardware ((uint16_t)0x0000) /*!< Hardware synchronization data capture (frame/line start/stop)
is synchronized with the HSYNC/VSYNC signals */
#define DCMI_SynchroMode_Embedded ((uint16_t)0x0010) /*!< Embedded synchronization data capture is synchronized with
synchronization codes embedded in the data flow */
#define IS_DCMI_SYNCHRO(MODE)(((MODE) == DCMI_SynchroMode_Hardware) || \
((MODE) == DCMI_SynchroMode_Embedded))
/**
* @}
*/
/** @defgroup DCMI_PIXCK_Polarity
* @{
*/
#define DCMI_PCKPolarity_Falling ((uint16_t)0x0000) /*!< Pixel clock active on Falling edge */
#define DCMI_PCKPolarity_Rising ((uint16_t)0x0020) /*!< Pixel clock active on Rising edge */
#define IS_DCMI_PCKPOLARITY(POLARITY)(((POLARITY) == DCMI_PCKPolarity_Falling) || \
((POLARITY) == DCMI_PCKPolarity_Rising))
/**
* @}
*/
/** @defgroup DCMI_VSYNC_Polarity
* @{
*/
#define DCMI_VSPolarity_Low ((uint16_t)0x0000) /*!< Vertical synchronization active Low */
#define DCMI_VSPolarity_High ((uint16_t)0x0080) /*!< Vertical synchronization active High */
#define IS_DCMI_VSPOLARITY(POLARITY)(((POLARITY) == DCMI_VSPolarity_Low) || \
((POLARITY) == DCMI_VSPolarity_High))
/**
* @}
*/
/** @defgroup DCMI_HSYNC_Polarity
* @{
*/
#define DCMI_HSPolarity_Low ((uint16_t)0x0000) /*!< Horizontal synchronization active Low */
#define DCMI_HSPolarity_High ((uint16_t)0x0040) /*!< Horizontal synchronization active High */
#define IS_DCMI_HSPOLARITY(POLARITY)(((POLARITY) == DCMI_HSPolarity_Low) || \
((POLARITY) == DCMI_HSPolarity_High))
/**
* @}
*/
/** @defgroup DCMI_Capture_Rate
* @{
*/
#define DCMI_CaptureRate_All_Frame ((uint16_t)0x0000) /*!< All frames are captured */
#define DCMI_CaptureRate_1of2_Frame ((uint16_t)0x0100) /*!< Every alternate frame captured */
#define DCMI_CaptureRate_1of4_Frame ((uint16_t)0x0200) /*!< One frame in 4 frames captured */
#define IS_DCMI_CAPTURE_RATE(RATE) (((RATE) == DCMI_CaptureRate_All_Frame) || \
((RATE) == DCMI_CaptureRate_1of2_Frame) ||\
((RATE) == DCMI_CaptureRate_1of4_Frame))
/**
* @}
*/
/** @defgroup DCMI_Extended_Data_Mode
* @{
*/
#define DCMI_ExtendedDataMode_8b ((uint16_t)0x0000) /*!< Interface captures 8-bit data on every pixel clock */
#define DCMI_ExtendedDataMode_10b ((uint16_t)0x0400) /*!< Interface captures 10-bit data on every pixel clock */
#define DCMI_ExtendedDataMode_12b ((uint16_t)0x0800) /*!< Interface captures 12-bit data on every pixel clock */
#define DCMI_ExtendedDataMode_14b ((uint16_t)0x0C00) /*!< Interface captures 14-bit data on every pixel clock */
#define IS_DCMI_EXTENDED_DATA(DATA)(((DATA) == DCMI_ExtendedDataMode_8b) || \
((DATA) == DCMI_ExtendedDataMode_10b) ||\
((DATA) == DCMI_ExtendedDataMode_12b) ||\
((DATA) == DCMI_ExtendedDataMode_14b))
/**
* @}
*/
/** @defgroup DCMI_interrupt_sources
* @{
*/
#define DCMI_IT_FRAME ((uint16_t)0x0001)
#define DCMI_IT_OVF ((uint16_t)0x0002)
#define DCMI_IT_ERR ((uint16_t)0x0004)
#define DCMI_IT_VSYNC ((uint16_t)0x0008)
#define DCMI_IT_LINE ((uint16_t)0x0010)
#define IS_DCMI_CONFIG_IT(IT) ((((IT) & (uint16_t)0xFFE0) == 0x0000) && ((IT) != 0x0000))
#define IS_DCMI_GET_IT(IT) (((IT) == DCMI_IT_FRAME) || \
((IT) == DCMI_IT_OVF) || \
((IT) == DCMI_IT_ERR) || \
((IT) == DCMI_IT_VSYNC) || \
((IT) == DCMI_IT_LINE))
/**
* @}
*/
/** @defgroup DCMI_Flags
* @{
*/
/**
* @brief DCMI SR register
*/
#define DCMI_FLAG_HSYNC ((uint16_t)0x2001)
#define DCMI_FLAG_VSYNC ((uint16_t)0x2002)
#define DCMI_FLAG_FNE ((uint16_t)0x2004)
/**
* @brief DCMI RISR register
*/
#define DCMI_FLAG_FRAMERI ((uint16_t)0x0001)
#define DCMI_FLAG_OVFRI ((uint16_t)0x0002)
#define DCMI_FLAG_ERRRI ((uint16_t)0x0004)
#define DCMI_FLAG_VSYNCRI ((uint16_t)0x0008)
#define DCMI_FLAG_LINERI ((uint16_t)0x0010)
/**
* @brief DCMI MISR register
*/
#define DCMI_FLAG_FRAMEMI ((uint16_t)0x1001)
#define DCMI_FLAG_OVFMI ((uint16_t)0x1002)
#define DCMI_FLAG_ERRMI ((uint16_t)0x1004)
#define DCMI_FLAG_VSYNCMI ((uint16_t)0x1008)
#define DCMI_FLAG_LINEMI ((uint16_t)0x1010)
#define IS_DCMI_GET_FLAG(FLAG) (((FLAG) == DCMI_FLAG_HSYNC) || \
((FLAG) == DCMI_FLAG_VSYNC) || \
((FLAG) == DCMI_FLAG_FNE) || \
((FLAG) == DCMI_FLAG_FRAMERI) || \
((FLAG) == DCMI_FLAG_OVFRI) || \
((FLAG) == DCMI_FLAG_ERRRI) || \
((FLAG) == DCMI_FLAG_VSYNCRI) || \
((FLAG) == DCMI_FLAG_LINERI) || \
((FLAG) == DCMI_FLAG_FRAMEMI) || \
((FLAG) == DCMI_FLAG_OVFMI) || \
((FLAG) == DCMI_FLAG_ERRMI) || \
((FLAG) == DCMI_FLAG_VSYNCMI) || \
((FLAG) == DCMI_FLAG_LINEMI))
#define IS_DCMI_CLEAR_FLAG(FLAG) ((((FLAG) & (uint16_t)0xFFE0) == 0x0000) && ((FLAG) != 0x0000))
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/* Function used to set the DCMI configuration to the default reset state ****/
void DCMI_DeInit(void);
/* Initialization and Configuration functions *********************************/
void DCMI_Init(DCMI_InitTypeDef* DCMI_InitStruct);
void DCMI_StructInit(DCMI_InitTypeDef* DCMI_InitStruct);
void DCMI_CROPConfig(DCMI_CROPInitTypeDef* DCMI_CROPInitStruct);
void DCMI_CROPCmd(FunctionalState NewState);
void DCMI_SetEmbeddedSynchroCodes(DCMI_CodesInitTypeDef* DCMI_CodesInitStruct);
void DCMI_JPEGCmd(FunctionalState NewState);
/* Image capture functions ****************************************************/
void DCMI_Cmd(FunctionalState NewState);
void DCMI_CaptureCmd(FunctionalState NewState);
uint32_t DCMI_ReadData(void);
/* Interrupts and flags management functions **********************************/
void DCMI_ITConfig(uint16_t DCMI_IT, FunctionalState NewState);
FlagStatus DCMI_GetFlagStatus(uint16_t DCMI_FLAG);
void DCMI_ClearFlag(uint16_t DCMI_FLAG);
ITStatus DCMI_GetITStatus(uint16_t DCMI_IT);
void DCMI_ClearITPendingBit(uint16_t DCMI_IT);
#ifdef __cplusplus
}
#endif
#endif /*__STM32F2xx_DCMI_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
@@ -1,183 +1,183 @@
/**
******************************************************************************
* @file stm32f2xx_exti.h
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file contains all the functions prototypes for the EXTI firmware
* library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F2xx_EXTI_H
#define __STM32F2xx_EXTI_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f2xx.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @addtogroup EXTI
* @{
*/
/* Exported types ------------------------------------------------------------*/
/**
* @brief EXTI mode enumeration
*/
typedef enum
{
EXTI_Mode_Interrupt = 0x00,
EXTI_Mode_Event = 0x04
}EXTIMode_TypeDef;
#define IS_EXTI_MODE(MODE) (((MODE) == EXTI_Mode_Interrupt) || ((MODE) == EXTI_Mode_Event))
/**
* @brief EXTI Trigger enumeration
*/
typedef enum
{
EXTI_Trigger_Rising = 0x08,
EXTI_Trigger_Falling = 0x0C,
EXTI_Trigger_Rising_Falling = 0x10
}EXTITrigger_TypeDef;
#define IS_EXTI_TRIGGER(TRIGGER) (((TRIGGER) == EXTI_Trigger_Rising) || \
((TRIGGER) == EXTI_Trigger_Falling) || \
((TRIGGER) == EXTI_Trigger_Rising_Falling))
/**
* @brief EXTI Init Structure definition
*/
typedef struct
{
uint32_t EXTI_Line; /*!< Specifies the EXTI lines to be enabled or disabled.
This parameter can be any combination value of @ref EXTI_Lines */
EXTIMode_TypeDef EXTI_Mode; /*!< Specifies the mode for the EXTI lines.
This parameter can be a value of @ref EXTIMode_TypeDef */
EXTITrigger_TypeDef EXTI_Trigger; /*!< Specifies the trigger signal active edge for the EXTI lines.
This parameter can be a value of @ref EXTITrigger_TypeDef */
FunctionalState EXTI_LineCmd; /*!< Specifies the new state of the selected EXTI lines.
This parameter can be set either to ENABLE or DISABLE */
}EXTI_InitTypeDef;
/* Exported constants --------------------------------------------------------*/
/** @defgroup EXTI_Exported_Constants
* @{
*/
/** @defgroup EXTI_Lines
* @{
*/
#define EXTI_Line0 ((uint32_t)0x00001) /*!< External interrupt line 0 */
#define EXTI_Line1 ((uint32_t)0x00002) /*!< External interrupt line 1 */
#define EXTI_Line2 ((uint32_t)0x00004) /*!< External interrupt line 2 */
#define EXTI_Line3 ((uint32_t)0x00008) /*!< External interrupt line 3 */
#define EXTI_Line4 ((uint32_t)0x00010) /*!< External interrupt line 4 */
#define EXTI_Line5 ((uint32_t)0x00020) /*!< External interrupt line 5 */
#define EXTI_Line6 ((uint32_t)0x00040) /*!< External interrupt line 6 */
#define EXTI_Line7 ((uint32_t)0x00080) /*!< External interrupt line 7 */
#define EXTI_Line8 ((uint32_t)0x00100) /*!< External interrupt line 8 */
#define EXTI_Line9 ((uint32_t)0x00200) /*!< External interrupt line 9 */
#define EXTI_Line10 ((uint32_t)0x00400) /*!< External interrupt line 10 */
#define EXTI_Line11 ((uint32_t)0x00800) /*!< External interrupt line 11 */
#define EXTI_Line12 ((uint32_t)0x01000) /*!< External interrupt line 12 */
#define EXTI_Line13 ((uint32_t)0x02000) /*!< External interrupt line 13 */
#define EXTI_Line14 ((uint32_t)0x04000) /*!< External interrupt line 14 */
#define EXTI_Line15 ((uint32_t)0x08000) /*!< External interrupt line 15 */
#define EXTI_Line16 ((uint32_t)0x10000) /*!< External interrupt line 16 Connected to the PVD Output */
#define EXTI_Line17 ((uint32_t)0x20000) /*!< External interrupt line 17 Connected to the RTC Alarm event */
#define EXTI_Line18 ((uint32_t)0x40000) /*!< External interrupt line 18 Connected to the USB OTG FS Wakeup from suspend event */
#define EXTI_Line19 ((uint32_t)0x80000) /*!< External interrupt line 19 Connected to the Ethernet Wakeup event */
#define EXTI_Line20 ((uint32_t)0x00100000) /*!< External interrupt line 20 Connected to the USB OTG HS (configured in FS) Wakeup event */
#define EXTI_Line21 ((uint32_t)0x00200000) /*!< External interrupt line 21 Connected to the RTC Tamper and Time Stamp events */
#define EXTI_Line22 ((uint32_t)0x00400000) /*!< External interrupt line 22 Connected to the RTC Wakeup event */
#define IS_EXTI_LINE(LINE) ((((LINE) & (uint32_t)0xFF800000) == 0x00) && ((LINE) != (uint16_t)0x00))
#define IS_GET_EXTI_LINE(LINE) (((LINE) == EXTI_Line0) || ((LINE) == EXTI_Line1) || \
((LINE) == EXTI_Line2) || ((LINE) == EXTI_Line3) || \
((LINE) == EXTI_Line4) || ((LINE) == EXTI_Line5) || \
((LINE) == EXTI_Line6) || ((LINE) == EXTI_Line7) || \
((LINE) == EXTI_Line8) || ((LINE) == EXTI_Line9) || \
((LINE) == EXTI_Line10) || ((LINE) == EXTI_Line11) || \
((LINE) == EXTI_Line12) || ((LINE) == EXTI_Line13) || \
((LINE) == EXTI_Line14) || ((LINE) == EXTI_Line15) || \
((LINE) == EXTI_Line16) || ((LINE) == EXTI_Line17) || \
((LINE) == EXTI_Line18) || ((LINE) == EXTI_Line19) || \
((LINE) == EXTI_Line20) || ((LINE) == EXTI_Line21) ||\
((LINE) == EXTI_Line22))
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/* Function used to set the EXTI configuration to the default reset state *****/
void EXTI_DeInit(void);
/* Initialization and Configuration functions *********************************/
void EXTI_Init(EXTI_InitTypeDef* EXTI_InitStruct);
void EXTI_StructInit(EXTI_InitTypeDef* EXTI_InitStruct);
void EXTI_GenerateSWInterrupt(uint32_t EXTI_Line);
/* Interrupts and flags management functions **********************************/
FlagStatus EXTI_GetFlagStatus(uint32_t EXTI_Line);
void EXTI_ClearFlag(uint32_t EXTI_Line);
ITStatus EXTI_GetITStatus(uint32_t EXTI_Line);
void EXTI_ClearITPendingBit(uint32_t EXTI_Line);
#ifdef __cplusplus
}
#endif
#endif /* __STM32F2xx_EXTI_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
/**
******************************************************************************
* @file stm32f2xx_exti.h
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file contains all the functions prototypes for the EXTI firmware
* library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F2xx_EXTI_H
#define __STM32F2xx_EXTI_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f2xx.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @addtogroup EXTI
* @{
*/
/* Exported types ------------------------------------------------------------*/
/**
* @brief EXTI mode enumeration
*/
typedef enum
{
EXTI_Mode_Interrupt = 0x00,
EXTI_Mode_Event = 0x04
}EXTIMode_TypeDef;
#define IS_EXTI_MODE(MODE) (((MODE) == EXTI_Mode_Interrupt) || ((MODE) == EXTI_Mode_Event))
/**
* @brief EXTI Trigger enumeration
*/
typedef enum
{
EXTI_Trigger_Rising = 0x08,
EXTI_Trigger_Falling = 0x0C,
EXTI_Trigger_Rising_Falling = 0x10
}EXTITrigger_TypeDef;
#define IS_EXTI_TRIGGER(TRIGGER) (((TRIGGER) == EXTI_Trigger_Rising) || \
((TRIGGER) == EXTI_Trigger_Falling) || \
((TRIGGER) == EXTI_Trigger_Rising_Falling))
/**
* @brief EXTI Init Structure definition
*/
typedef struct
{
uint32_t EXTI_Line; /*!< Specifies the EXTI lines to be enabled or disabled.
This parameter can be any combination value of @ref EXTI_Lines */
EXTIMode_TypeDef EXTI_Mode; /*!< Specifies the mode for the EXTI lines.
This parameter can be a value of @ref EXTIMode_TypeDef */
EXTITrigger_TypeDef EXTI_Trigger; /*!< Specifies the trigger signal active edge for the EXTI lines.
This parameter can be a value of @ref EXTITrigger_TypeDef */
FunctionalState EXTI_LineCmd; /*!< Specifies the new state of the selected EXTI lines.
This parameter can be set either to ENABLE or DISABLE */
}EXTI_InitTypeDef;
/* Exported constants --------------------------------------------------------*/
/** @defgroup EXTI_Exported_Constants
* @{
*/
/** @defgroup EXTI_Lines
* @{
*/
#define EXTI_Line0 ((uint32_t)0x00001) /*!< External interrupt line 0 */
#define EXTI_Line1 ((uint32_t)0x00002) /*!< External interrupt line 1 */
#define EXTI_Line2 ((uint32_t)0x00004) /*!< External interrupt line 2 */
#define EXTI_Line3 ((uint32_t)0x00008) /*!< External interrupt line 3 */
#define EXTI_Line4 ((uint32_t)0x00010) /*!< External interrupt line 4 */
#define EXTI_Line5 ((uint32_t)0x00020) /*!< External interrupt line 5 */
#define EXTI_Line6 ((uint32_t)0x00040) /*!< External interrupt line 6 */
#define EXTI_Line7 ((uint32_t)0x00080) /*!< External interrupt line 7 */
#define EXTI_Line8 ((uint32_t)0x00100) /*!< External interrupt line 8 */
#define EXTI_Line9 ((uint32_t)0x00200) /*!< External interrupt line 9 */
#define EXTI_Line10 ((uint32_t)0x00400) /*!< External interrupt line 10 */
#define EXTI_Line11 ((uint32_t)0x00800) /*!< External interrupt line 11 */
#define EXTI_Line12 ((uint32_t)0x01000) /*!< External interrupt line 12 */
#define EXTI_Line13 ((uint32_t)0x02000) /*!< External interrupt line 13 */
#define EXTI_Line14 ((uint32_t)0x04000) /*!< External interrupt line 14 */
#define EXTI_Line15 ((uint32_t)0x08000) /*!< External interrupt line 15 */
#define EXTI_Line16 ((uint32_t)0x10000) /*!< External interrupt line 16 Connected to the PVD Output */
#define EXTI_Line17 ((uint32_t)0x20000) /*!< External interrupt line 17 Connected to the RTC Alarm event */
#define EXTI_Line18 ((uint32_t)0x40000) /*!< External interrupt line 18 Connected to the USB OTG FS Wakeup from suspend event */
#define EXTI_Line19 ((uint32_t)0x80000) /*!< External interrupt line 19 Connected to the Ethernet Wakeup event */
#define EXTI_Line20 ((uint32_t)0x00100000) /*!< External interrupt line 20 Connected to the USB OTG HS (configured in FS) Wakeup event */
#define EXTI_Line21 ((uint32_t)0x00200000) /*!< External interrupt line 21 Connected to the RTC Tamper and Time Stamp events */
#define EXTI_Line22 ((uint32_t)0x00400000) /*!< External interrupt line 22 Connected to the RTC Wakeup event */
#define IS_EXTI_LINE(LINE) ((((LINE) & (uint32_t)0xFF800000) == 0x00) && ((LINE) != (uint16_t)0x00))
#define IS_GET_EXTI_LINE(LINE) (((LINE) == EXTI_Line0) || ((LINE) == EXTI_Line1) || \
((LINE) == EXTI_Line2) || ((LINE) == EXTI_Line3) || \
((LINE) == EXTI_Line4) || ((LINE) == EXTI_Line5) || \
((LINE) == EXTI_Line6) || ((LINE) == EXTI_Line7) || \
((LINE) == EXTI_Line8) || ((LINE) == EXTI_Line9) || \
((LINE) == EXTI_Line10) || ((LINE) == EXTI_Line11) || \
((LINE) == EXTI_Line12) || ((LINE) == EXTI_Line13) || \
((LINE) == EXTI_Line14) || ((LINE) == EXTI_Line15) || \
((LINE) == EXTI_Line16) || ((LINE) == EXTI_Line17) || \
((LINE) == EXTI_Line18) || ((LINE) == EXTI_Line19) || \
((LINE) == EXTI_Line20) || ((LINE) == EXTI_Line21) ||\
((LINE) == EXTI_Line22))
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/* Function used to set the EXTI configuration to the default reset state *****/
void EXTI_DeInit(void);
/* Initialization and Configuration functions *********************************/
void EXTI_Init(EXTI_InitTypeDef* EXTI_InitStruct);
void EXTI_StructInit(EXTI_InitTypeDef* EXTI_InitStruct);
void EXTI_GenerateSWInterrupt(uint32_t EXTI_Line);
/* Interrupts and flags management functions **********************************/
FlagStatus EXTI_GetFlagStatus(uint32_t EXTI_Line);
void EXTI_ClearFlag(uint32_t EXTI_Line);
ITStatus EXTI_GetITStatus(uint32_t EXTI_Line);
void EXTI_ClearITPendingBit(uint32_t EXTI_Line);
#ifdef __cplusplus
}
#endif
#endif /* __STM32F2xx_EXTI_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
@@ -1,340 +1,340 @@
/**
******************************************************************************
* @file stm32f2xx_flash.h
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file contains all the functions prototypes for the FLASH
* firmware library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F2xx_FLASH_H
#define __STM32F2xx_FLASH_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "../../CMSIS/Device/ST/STM32F2xx/Include/stm32f2xx.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @addtogroup FLASH
* @{
*/
/* Exported types ------------------------------------------------------------*/
/**
* @brief FLASH Status
*/
typedef enum
{
FLASH_BUSY = 1,
FLASH_ERROR_PGS,
FLASH_ERROR_PGP,
FLASH_ERROR_PGA,
FLASH_ERROR_WRP,
FLASH_ERROR_PROGRAM,
FLASH_ERROR_OPERATION,
FLASH_COMPLETE
}FLASH_Status;
/* Exported constants --------------------------------------------------------*/
/** @defgroup FLASH_Exported_Constants
* @{
*/
/** @defgroup Flash_Latency
* @{
*/
#define FLASH_Latency_0 ((uint8_t)0x0000) /*!< FLASH Zero Latency cycle */
#define FLASH_Latency_1 ((uint8_t)0x0001) /*!< FLASH One Latency cycle */
#define FLASH_Latency_2 ((uint8_t)0x0002) /*!< FLASH Two Latency cycles */
#define FLASH_Latency_3 ((uint8_t)0x0003) /*!< FLASH Three Latency cycles */
#define FLASH_Latency_4 ((uint8_t)0x0004) /*!< FLASH Four Latency cycles */
#define FLASH_Latency_5 ((uint8_t)0x0005) /*!< FLASH Five Latency cycles */
#define FLASH_Latency_6 ((uint8_t)0x0006) /*!< FLASH Six Latency cycles */
#define FLASH_Latency_7 ((uint8_t)0x0007) /*!< FLASH Seven Latency cycles */
#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_Latency_0) || \
((LATENCY) == FLASH_Latency_1) || \
((LATENCY) == FLASH_Latency_2) || \
((LATENCY) == FLASH_Latency_3) || \
((LATENCY) == FLASH_Latency_4) || \
((LATENCY) == FLASH_Latency_5) || \
((LATENCY) == FLASH_Latency_6) || \
((LATENCY) == FLASH_Latency_7))
/**
* @}
*/
/** @defgroup FLASH_Voltage_Range
* @{
*/
#define VoltageRange_1 ((uint8_t)0x00) /*!< Device operating range: 1.8V to 2.1V */
#define VoltageRange_2 ((uint8_t)0x01) /*!<Device operating range: 2.1V to 2.7V */
#define VoltageRange_3 ((uint8_t)0x02) /*!<Device operating range: 2.7V to 3.6V */
#define VoltageRange_4 ((uint8_t)0x03) /*!<Device operating range: 2.7V to 3.6V + External Vpp */
#define IS_VOLTAGERANGE(RANGE)(((RANGE) == VoltageRange_1) || \
((RANGE) == VoltageRange_2) || \
((RANGE) == VoltageRange_3) || \
((RANGE) == VoltageRange_4))
/**
* @}
*/
/** @defgroup FLASH_Sectors
* @{
*/
#define FLASH_Sector_0 ((uint16_t)0x0000) /*!< Sector Number 0 */
#define FLASH_Sector_1 ((uint16_t)0x0008) /*!< Sector Number 1 */
#define FLASH_Sector_2 ((uint16_t)0x0010) /*!< Sector Number 2 */
#define FLASH_Sector_3 ((uint16_t)0x0018) /*!< Sector Number 3 */
#define FLASH_Sector_4 ((uint16_t)0x0020) /*!< Sector Number 4 */
#define FLASH_Sector_5 ((uint16_t)0x0028) /*!< Sector Number 5 */
#define FLASH_Sector_6 ((uint16_t)0x0030) /*!< Sector Number 6 */
#define FLASH_Sector_7 ((uint16_t)0x0038) /*!< Sector Number 7 */
#define FLASH_Sector_8 ((uint16_t)0x0040) /*!< Sector Number 8 */
#define FLASH_Sector_9 ((uint16_t)0x0048) /*!< Sector Number 9 */
#define FLASH_Sector_10 ((uint16_t)0x0050) /*!< Sector Number 10 */
#define FLASH_Sector_11 ((uint16_t)0x0058) /*!< Sector Number 11 */
#define IS_FLASH_SECTOR(SECTOR) (((SECTOR) == FLASH_Sector_0) || ((SECTOR) == FLASH_Sector_1) ||\
((SECTOR) == FLASH_Sector_2) || ((SECTOR) == FLASH_Sector_3) ||\
((SECTOR) == FLASH_Sector_4) || ((SECTOR) == FLASH_Sector_5) ||\
((SECTOR) == FLASH_Sector_6) || ((SECTOR) == FLASH_Sector_7) ||\
((SECTOR) == FLASH_Sector_8) || ((SECTOR) == FLASH_Sector_9) ||\
((SECTOR) == FLASH_Sector_10) || ((SECTOR) == FLASH_Sector_11))
#define IS_FLASH_ADDRESS(ADDRESS) ((((ADDRESS) >= 0x08000000) && ((ADDRESS) < 0x080FFFFF)) ||\
(((ADDRESS) >= 0x1FFF7800) && ((ADDRESS) < 0x1FFF7A0F)))
/**
* @}
*/
/** @defgroup Option_Bytes_Write_Protection
* @{
*/
#define OB_WRP_Sector_0 ((uint32_t)0x00000001) /*!< Write protection of Sector0 */
#define OB_WRP_Sector_1 ((uint32_t)0x00000002) /*!< Write protection of Sector1 */
#define OB_WRP_Sector_2 ((uint32_t)0x00000004) /*!< Write protection of Sector2 */
#define OB_WRP_Sector_3 ((uint32_t)0x00000008) /*!< Write protection of Sector3 */
#define OB_WRP_Sector_4 ((uint32_t)0x00000010) /*!< Write protection of Sector4 */
#define OB_WRP_Sector_5 ((uint32_t)0x00000020) /*!< Write protection of Sector5 */
#define OB_WRP_Sector_6 ((uint32_t)0x00000040) /*!< Write protection of Sector6 */
#define OB_WRP_Sector_7 ((uint32_t)0x00000080) /*!< Write protection of Sector7 */
#define OB_WRP_Sector_8 ((uint32_t)0x00000100) /*!< Write protection of Sector8 */
#define OB_WRP_Sector_9 ((uint32_t)0x00000200) /*!< Write protection of Sector9 */
#define OB_WRP_Sector_10 ((uint32_t)0x00000400) /*!< Write protection of Sector10 */
#define OB_WRP_Sector_11 ((uint32_t)0x00000800) /*!< Write protection of Sector11 */
#define OB_WRP_Sector_All ((uint32_t)0x00000FFF) /*!< Write protection of all Sectors */
#define IS_OB_WRP(SECTOR)((((SECTOR) & (uint32_t)0xFFFFF000) == 0x00000000) && ((SECTOR) != 0x00000000))
/**
* @}
*/
/** @defgroup FLASH_Option_Bytes_Read_Protection
* @{
*/
#define OB_RDP_Level_0 ((uint8_t)0xAA)
#define OB_RDP_Level_1 ((uint8_t)0x55)
/*#define OB_RDP_Level_2 ((uint8_t)0xCC)*/ /*!< Warning: When enabling read protection level 2
it's no more possible to go back to level 1 or 0 */
#define IS_OB_RDP(LEVEL) (((LEVEL) == OB_RDP_Level_0)||\
((LEVEL) == OB_RDP_Level_1))/*||\
((LEVEL) == OB_RDP_Level_2))*/
/**
* @}
*/
/** @defgroup FLASH_Option_Bytes_IWatchdog
* @{
*/
#define OB_IWDG_SW ((uint8_t)0x20) /*!< Software IWDG selected */
#define OB_IWDG_HW ((uint8_t)0x00) /*!< Hardware IWDG selected */
#define IS_OB_IWDG_SOURCE(SOURCE) (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW))
/**
* @}
*/
/** @defgroup FLASH_Option_Bytes_nRST_STOP
* @{
*/
#define OB_STOP_NoRST ((uint8_t)0x40) /*!< No reset generated when entering in STOP */
#define OB_STOP_RST ((uint8_t)0x00) /*!< Reset generated when entering in STOP */
#define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NoRST) || ((SOURCE) == OB_STOP_RST))
/**
* @}
*/
/** @defgroup FLASH_Option_Bytes_nRST_STDBY
* @{
*/
#define OB_STDBY_NoRST ((uint8_t)0x80) /*!< No reset generated when entering in STANDBY */
#define OB_STDBY_RST ((uint8_t)0x00) /*!< Reset generated when entering in STANDBY */
#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NoRST) || ((SOURCE) == OB_STDBY_RST))
/**
* @}
*/
/** @defgroup FLASH_BOR_Reset_Level
* @{
*/
#define OB_BOR_LEVEL3 ((uint8_t)0x00) /*!< Supply voltage ranges from 2.70 to 3.60 V */
#define OB_BOR_LEVEL2 ((uint8_t)0x04) /*!< Supply voltage ranges from 2.40 to 2.70 V */
#define OB_BOR_LEVEL1 ((uint8_t)0x08) /*!< Supply voltage ranges from 2.10 to 2.40 V */
#define OB_BOR_OFF ((uint8_t)0x0C) /*!< Supply voltage ranges from 1.62 to 2.10 V */
#define IS_OB_BOR(LEVEL) (((LEVEL) == OB_BOR_LEVEL1) || ((LEVEL) == OB_BOR_LEVEL2) ||\
((LEVEL) == OB_BOR_LEVEL3) || ((LEVEL) == OB_BOR_OFF))
/**
* @}
*/
/** @defgroup FLASH_Interrupts
* @{
*/
#define FLASH_IT_EOP ((uint32_t)0x01000000) /*!< End of FLASH Operation Interrupt source */
#define FLASH_IT_ERR ((uint32_t)0x02000000) /*!< Error Interrupt source */
#define IS_FLASH_IT(IT) ((((IT) & (uint32_t)0xFCFFFFFF) == 0x00000000) && ((IT) != 0x00000000))
/**
* @}
*/
/** @defgroup FLASH_Flags
* @{
*/
#define FLASH_FLAG_EOP ((uint32_t)0x00000001) /*!< FLASH End of Operation flag */
#define FLASH_FLAG_OPERR ((uint32_t)0x00000002) /*!< FLASH operation Error flag */
#define FLASH_FLAG_WRPERR ((uint32_t)0x00000010) /*!< FLASH Write protected error flag */
#define FLASH_FLAG_PGAERR ((uint32_t)0x00000020) /*!< FLASH Programming Alignment error flag */
#define FLASH_FLAG_PGPERR ((uint32_t)0x00000040) /*!< FLASH Programming Parallelism error flag */
#define FLASH_FLAG_PGSERR ((uint32_t)0x00000080) /*!< FLASH Programming Sequence error flag */
#define FLASH_FLAG_BSY ((uint32_t)0x00010000) /*!< FLASH Busy flag */
#define IS_FLASH_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFFFF0C) == 0x00000000) && ((FLAG) != 0x00000000))
#define IS_FLASH_GET_FLAG(FLAG) (((FLAG) == FLASH_FLAG_EOP) || ((FLAG) == FLASH_FLAG_OPERR) || \
((FLAG) == FLASH_FLAG_WRPERR) || ((FLAG) == FLASH_FLAG_PGAERR) || \
((FLAG) == FLASH_FLAG_PGPERR) || ((FLAG) == FLASH_FLAG_PGSERR) || \
((FLAG) == FLASH_FLAG_BSY))
/**
* @}
*/
/** @defgroup FLASH_Program_Parallelism
* @{
*/
#define FLASH_PSIZE_BYTE ((uint32_t)0x00000000)
#define FLASH_PSIZE_HALF_WORD ((uint32_t)0x00000100)
#define FLASH_PSIZE_WORD ((uint32_t)0x00000200)
#define FLASH_PSIZE_DOUBLE_WORD ((uint32_t)0x00000300)
#define CR_PSIZE_MASK ((uint32_t)0xFFFFFCFF)
/**
* @}
*/
/** @defgroup FLASH_Keys
* @{
*/
#define RDP_KEY ((uint16_t)0x00A5)
#define FLASH_KEY1 ((uint32_t)0x45670123)
#define FLASH_KEY2 ((uint32_t)0xCDEF89AB)
#define FLASH_OPT_KEY1 ((uint32_t)0x08192A3B)
#define FLASH_OPT_KEY2 ((uint32_t)0x4C5D6E7F)
/**
* @}
*/
/**
* @brief ACR register byte 0 (Bits[8:0]) base address
*/
#define ACR_BYTE0_ADDRESS ((uint32_t)0x40023C00)
/**
* @brief OPTCR register byte 3 (Bits[24:16]) base address
*/
#define OPTCR_BYTE0_ADDRESS ((uint32_t)0x40023C14)
#define OPTCR_BYTE1_ADDRESS ((uint32_t)0x40023C15)
#define OPTCR_BYTE2_ADDRESS ((uint32_t)0x40023C16)
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/* FLASH Interface configuration functions ************************************/
void FLASH_SetLatency(uint32_t FLASH_Latency);
void FLASH_PrefetchBufferCmd(FunctionalState NewState);
void FLASH_InstructionCacheCmd(FunctionalState NewState);
void FLASH_DataCacheCmd(FunctionalState NewState);
void FLASH_InstructionCacheReset(void);
void FLASH_DataCacheReset(void);
/* FLASH Memory Programming functions *****************************************/
void FLASH_Unlock(void);
void FLASH_Lock(void);
FLASH_Status FLASH_EraseSector(uint32_t FLASH_Sector, uint8_t VoltageRange);
FLASH_Status FLASH_EraseAllSectors(uint8_t VoltageRange);
FLASH_Status FLASH_ProgramDoubleWord(uint32_t Address, uint64_t Data);
FLASH_Status FLASH_ProgramWord(uint32_t Address, uint32_t Data);
FLASH_Status FLASH_ProgramHalfWord(uint32_t Address, uint16_t Data);
FLASH_Status FLASH_ProgramByte(uint32_t Address, uint8_t Data);
/* Option Bytes Programming functions *****************************************/
void FLASH_OB_Unlock(void);
void FLASH_OB_Lock(void);
void FLASH_OB_WRPConfig(uint32_t OB_WRP, FunctionalState NewState);
void FLASH_OB_RDPConfig(uint8_t OB_RDP);
void FLASH_OB_UserConfig(uint8_t OB_IWDG, uint8_t OB_STOP, uint8_t OB_STDBY);
void FLASH_OB_BORConfig(uint8_t OB_BOR);
FLASH_Status FLASH_OB_Launch(void);
uint8_t FLASH_OB_GetUser(void);
uint16_t FLASH_OB_GetWRP(void);
FlagStatus FLASH_OB_GetRDP(void);
uint8_t FLASH_OB_GetBOR(void);
/* Interrupts and flags management functions **********************************/
void FLASH_ITConfig(uint32_t FLASH_IT, FunctionalState NewState);
FlagStatus FLASH_GetFlagStatus(uint32_t FLASH_FLAG);
void FLASH_ClearFlag(uint32_t FLASH_FLAG);
FLASH_Status FLASH_GetStatus(void);
FLASH_Status FLASH_WaitForLastOperation(void);
#ifdef __cplusplus
}
#endif
#endif /* __STM32F2xx_FLASH_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
/**
******************************************************************************
* @file stm32f2xx_flash.h
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file contains all the functions prototypes for the FLASH
* firmware library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F2xx_FLASH_H
#define __STM32F2xx_FLASH_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "../../CMSIS/Device/ST/STM32F2xx/Include/stm32f2xx.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @addtogroup FLASH
* @{
*/
/* Exported types ------------------------------------------------------------*/
/**
* @brief FLASH Status
*/
typedef enum
{
FLASH_BUSY = 1,
FLASH_ERROR_PGS,
FLASH_ERROR_PGP,
FLASH_ERROR_PGA,
FLASH_ERROR_WRP,
FLASH_ERROR_PROGRAM,
FLASH_ERROR_OPERATION,
FLASH_COMPLETE
}FLASH_Status;
/* Exported constants --------------------------------------------------------*/
/** @defgroup FLASH_Exported_Constants
* @{
*/
/** @defgroup Flash_Latency
* @{
*/
#define FLASH_Latency_0 ((uint8_t)0x0000) /*!< FLASH Zero Latency cycle */
#define FLASH_Latency_1 ((uint8_t)0x0001) /*!< FLASH One Latency cycle */
#define FLASH_Latency_2 ((uint8_t)0x0002) /*!< FLASH Two Latency cycles */
#define FLASH_Latency_3 ((uint8_t)0x0003) /*!< FLASH Three Latency cycles */
#define FLASH_Latency_4 ((uint8_t)0x0004) /*!< FLASH Four Latency cycles */
#define FLASH_Latency_5 ((uint8_t)0x0005) /*!< FLASH Five Latency cycles */
#define FLASH_Latency_6 ((uint8_t)0x0006) /*!< FLASH Six Latency cycles */
#define FLASH_Latency_7 ((uint8_t)0x0007) /*!< FLASH Seven Latency cycles */
#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_Latency_0) || \
((LATENCY) == FLASH_Latency_1) || \
((LATENCY) == FLASH_Latency_2) || \
((LATENCY) == FLASH_Latency_3) || \
((LATENCY) == FLASH_Latency_4) || \
((LATENCY) == FLASH_Latency_5) || \
((LATENCY) == FLASH_Latency_6) || \
((LATENCY) == FLASH_Latency_7))
/**
* @}
*/
/** @defgroup FLASH_Voltage_Range
* @{
*/
#define VoltageRange_1 ((uint8_t)0x00) /*!< Device operating range: 1.8V to 2.1V */
#define VoltageRange_2 ((uint8_t)0x01) /*!<Device operating range: 2.1V to 2.7V */
#define VoltageRange_3 ((uint8_t)0x02) /*!<Device operating range: 2.7V to 3.6V */
#define VoltageRange_4 ((uint8_t)0x03) /*!<Device operating range: 2.7V to 3.6V + External Vpp */
#define IS_VOLTAGERANGE(RANGE)(((RANGE) == VoltageRange_1) || \
((RANGE) == VoltageRange_2) || \
((RANGE) == VoltageRange_3) || \
((RANGE) == VoltageRange_4))
/**
* @}
*/
/** @defgroup FLASH_Sectors
* @{
*/
#define FLASH_Sector_0 ((uint16_t)0x0000) /*!< Sector Number 0 */
#define FLASH_Sector_1 ((uint16_t)0x0008) /*!< Sector Number 1 */
#define FLASH_Sector_2 ((uint16_t)0x0010) /*!< Sector Number 2 */
#define FLASH_Sector_3 ((uint16_t)0x0018) /*!< Sector Number 3 */
#define FLASH_Sector_4 ((uint16_t)0x0020) /*!< Sector Number 4 */
#define FLASH_Sector_5 ((uint16_t)0x0028) /*!< Sector Number 5 */
#define FLASH_Sector_6 ((uint16_t)0x0030) /*!< Sector Number 6 */
#define FLASH_Sector_7 ((uint16_t)0x0038) /*!< Sector Number 7 */
#define FLASH_Sector_8 ((uint16_t)0x0040) /*!< Sector Number 8 */
#define FLASH_Sector_9 ((uint16_t)0x0048) /*!< Sector Number 9 */
#define FLASH_Sector_10 ((uint16_t)0x0050) /*!< Sector Number 10 */
#define FLASH_Sector_11 ((uint16_t)0x0058) /*!< Sector Number 11 */
#define IS_FLASH_SECTOR(SECTOR) (((SECTOR) == FLASH_Sector_0) || ((SECTOR) == FLASH_Sector_1) ||\
((SECTOR) == FLASH_Sector_2) || ((SECTOR) == FLASH_Sector_3) ||\
((SECTOR) == FLASH_Sector_4) || ((SECTOR) == FLASH_Sector_5) ||\
((SECTOR) == FLASH_Sector_6) || ((SECTOR) == FLASH_Sector_7) ||\
((SECTOR) == FLASH_Sector_8) || ((SECTOR) == FLASH_Sector_9) ||\
((SECTOR) == FLASH_Sector_10) || ((SECTOR) == FLASH_Sector_11))
#define IS_FLASH_ADDRESS(ADDRESS) ((((ADDRESS) >= 0x08000000) && ((ADDRESS) < 0x080FFFFF)) ||\
(((ADDRESS) >= 0x1FFF7800) && ((ADDRESS) < 0x1FFF7A0F)))
/**
* @}
*/
/** @defgroup Option_Bytes_Write_Protection
* @{
*/
#define OB_WRP_Sector_0 ((uint32_t)0x00000001) /*!< Write protection of Sector0 */
#define OB_WRP_Sector_1 ((uint32_t)0x00000002) /*!< Write protection of Sector1 */
#define OB_WRP_Sector_2 ((uint32_t)0x00000004) /*!< Write protection of Sector2 */
#define OB_WRP_Sector_3 ((uint32_t)0x00000008) /*!< Write protection of Sector3 */
#define OB_WRP_Sector_4 ((uint32_t)0x00000010) /*!< Write protection of Sector4 */
#define OB_WRP_Sector_5 ((uint32_t)0x00000020) /*!< Write protection of Sector5 */
#define OB_WRP_Sector_6 ((uint32_t)0x00000040) /*!< Write protection of Sector6 */
#define OB_WRP_Sector_7 ((uint32_t)0x00000080) /*!< Write protection of Sector7 */
#define OB_WRP_Sector_8 ((uint32_t)0x00000100) /*!< Write protection of Sector8 */
#define OB_WRP_Sector_9 ((uint32_t)0x00000200) /*!< Write protection of Sector9 */
#define OB_WRP_Sector_10 ((uint32_t)0x00000400) /*!< Write protection of Sector10 */
#define OB_WRP_Sector_11 ((uint32_t)0x00000800) /*!< Write protection of Sector11 */
#define OB_WRP_Sector_All ((uint32_t)0x00000FFF) /*!< Write protection of all Sectors */
#define IS_OB_WRP(SECTOR)((((SECTOR) & (uint32_t)0xFFFFF000) == 0x00000000) && ((SECTOR) != 0x00000000))
/**
* @}
*/
/** @defgroup FLASH_Option_Bytes_Read_Protection
* @{
*/
#define OB_RDP_Level_0 ((uint8_t)0xAA)
#define OB_RDP_Level_1 ((uint8_t)0x55)
/*#define OB_RDP_Level_2 ((uint8_t)0xCC)*/ /*!< Warning: When enabling read protection level 2
it's no more possible to go back to level 1 or 0 */
#define IS_OB_RDP(LEVEL) (((LEVEL) == OB_RDP_Level_0)||\
((LEVEL) == OB_RDP_Level_1))/*||\
((LEVEL) == OB_RDP_Level_2))*/
/**
* @}
*/
/** @defgroup FLASH_Option_Bytes_IWatchdog
* @{
*/
#define OB_IWDG_SW ((uint8_t)0x20) /*!< Software IWDG selected */
#define OB_IWDG_HW ((uint8_t)0x00) /*!< Hardware IWDG selected */
#define IS_OB_IWDG_SOURCE(SOURCE) (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW))
/**
* @}
*/
/** @defgroup FLASH_Option_Bytes_nRST_STOP
* @{
*/
#define OB_STOP_NoRST ((uint8_t)0x40) /*!< No reset generated when entering in STOP */
#define OB_STOP_RST ((uint8_t)0x00) /*!< Reset generated when entering in STOP */
#define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NoRST) || ((SOURCE) == OB_STOP_RST))
/**
* @}
*/
/** @defgroup FLASH_Option_Bytes_nRST_STDBY
* @{
*/
#define OB_STDBY_NoRST ((uint8_t)0x80) /*!< No reset generated when entering in STANDBY */
#define OB_STDBY_RST ((uint8_t)0x00) /*!< Reset generated when entering in STANDBY */
#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NoRST) || ((SOURCE) == OB_STDBY_RST))
/**
* @}
*/
/** @defgroup FLASH_BOR_Reset_Level
* @{
*/
#define OB_BOR_LEVEL3 ((uint8_t)0x00) /*!< Supply voltage ranges from 2.70 to 3.60 V */
#define OB_BOR_LEVEL2 ((uint8_t)0x04) /*!< Supply voltage ranges from 2.40 to 2.70 V */
#define OB_BOR_LEVEL1 ((uint8_t)0x08) /*!< Supply voltage ranges from 2.10 to 2.40 V */
#define OB_BOR_OFF ((uint8_t)0x0C) /*!< Supply voltage ranges from 1.62 to 2.10 V */
#define IS_OB_BOR(LEVEL) (((LEVEL) == OB_BOR_LEVEL1) || ((LEVEL) == OB_BOR_LEVEL2) ||\
((LEVEL) == OB_BOR_LEVEL3) || ((LEVEL) == OB_BOR_OFF))
/**
* @}
*/
/** @defgroup FLASH_Interrupts
* @{
*/
#define FLASH_IT_EOP ((uint32_t)0x01000000) /*!< End of FLASH Operation Interrupt source */
#define FLASH_IT_ERR ((uint32_t)0x02000000) /*!< Error Interrupt source */
#define IS_FLASH_IT(IT) ((((IT) & (uint32_t)0xFCFFFFFF) == 0x00000000) && ((IT) != 0x00000000))
/**
* @}
*/
/** @defgroup FLASH_Flags
* @{
*/
#define FLASH_FLAG_EOP ((uint32_t)0x00000001) /*!< FLASH End of Operation flag */
#define FLASH_FLAG_OPERR ((uint32_t)0x00000002) /*!< FLASH operation Error flag */
#define FLASH_FLAG_WRPERR ((uint32_t)0x00000010) /*!< FLASH Write protected error flag */
#define FLASH_FLAG_PGAERR ((uint32_t)0x00000020) /*!< FLASH Programming Alignment error flag */
#define FLASH_FLAG_PGPERR ((uint32_t)0x00000040) /*!< FLASH Programming Parallelism error flag */
#define FLASH_FLAG_PGSERR ((uint32_t)0x00000080) /*!< FLASH Programming Sequence error flag */
#define FLASH_FLAG_BSY ((uint32_t)0x00010000) /*!< FLASH Busy flag */
#define IS_FLASH_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFFFF0C) == 0x00000000) && ((FLAG) != 0x00000000))
#define IS_FLASH_GET_FLAG(FLAG) (((FLAG) == FLASH_FLAG_EOP) || ((FLAG) == FLASH_FLAG_OPERR) || \
((FLAG) == FLASH_FLAG_WRPERR) || ((FLAG) == FLASH_FLAG_PGAERR) || \
((FLAG) == FLASH_FLAG_PGPERR) || ((FLAG) == FLASH_FLAG_PGSERR) || \
((FLAG) == FLASH_FLAG_BSY))
/**
* @}
*/
/** @defgroup FLASH_Program_Parallelism
* @{
*/
#define FLASH_PSIZE_BYTE ((uint32_t)0x00000000)
#define FLASH_PSIZE_HALF_WORD ((uint32_t)0x00000100)
#define FLASH_PSIZE_WORD ((uint32_t)0x00000200)
#define FLASH_PSIZE_DOUBLE_WORD ((uint32_t)0x00000300)
#define CR_PSIZE_MASK ((uint32_t)0xFFFFFCFF)
/**
* @}
*/
/** @defgroup FLASH_Keys
* @{
*/
#define RDP_KEY ((uint16_t)0x00A5)
#define FLASH_KEY1 ((uint32_t)0x45670123)
#define FLASH_KEY2 ((uint32_t)0xCDEF89AB)
#define FLASH_OPT_KEY1 ((uint32_t)0x08192A3B)
#define FLASH_OPT_KEY2 ((uint32_t)0x4C5D6E7F)
/**
* @}
*/
/**
* @brief ACR register byte 0 (Bits[8:0]) base address
*/
#define ACR_BYTE0_ADDRESS ((uint32_t)0x40023C00)
/**
* @brief OPTCR register byte 3 (Bits[24:16]) base address
*/
#define OPTCR_BYTE0_ADDRESS ((uint32_t)0x40023C14)
#define OPTCR_BYTE1_ADDRESS ((uint32_t)0x40023C15)
#define OPTCR_BYTE2_ADDRESS ((uint32_t)0x40023C16)
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/* FLASH Interface configuration functions ************************************/
void FLASH_SetLatency(uint32_t FLASH_Latency);
void FLASH_PrefetchBufferCmd(FunctionalState NewState);
void FLASH_InstructionCacheCmd(FunctionalState NewState);
void FLASH_DataCacheCmd(FunctionalState NewState);
void FLASH_InstructionCacheReset(void);
void FLASH_DataCacheReset(void);
/* FLASH Memory Programming functions *****************************************/
void FLASH_Unlock(void);
void FLASH_Lock(void);
FLASH_Status FLASH_EraseSector(uint32_t FLASH_Sector, uint8_t VoltageRange);
FLASH_Status FLASH_EraseAllSectors(uint8_t VoltageRange);
FLASH_Status FLASH_ProgramDoubleWord(uint32_t Address, uint64_t Data);
FLASH_Status FLASH_ProgramWord(uint32_t Address, uint32_t Data);
FLASH_Status FLASH_ProgramHalfWord(uint32_t Address, uint16_t Data);
FLASH_Status FLASH_ProgramByte(uint32_t Address, uint8_t Data);
/* Option Bytes Programming functions *****************************************/
void FLASH_OB_Unlock(void);
void FLASH_OB_Lock(void);
void FLASH_OB_WRPConfig(uint32_t OB_WRP, FunctionalState NewState);
void FLASH_OB_RDPConfig(uint8_t OB_RDP);
void FLASH_OB_UserConfig(uint8_t OB_IWDG, uint8_t OB_STOP, uint8_t OB_STDBY);
void FLASH_OB_BORConfig(uint8_t OB_BOR);
FLASH_Status FLASH_OB_Launch(void);
uint8_t FLASH_OB_GetUser(void);
uint16_t FLASH_OB_GetWRP(void);
FlagStatus FLASH_OB_GetRDP(void);
uint8_t FLASH_OB_GetBOR(void);
/* Interrupts and flags management functions **********************************/
void FLASH_ITConfig(uint32_t FLASH_IT, FunctionalState NewState);
FlagStatus FLASH_GetFlagStatus(uint32_t FLASH_FLAG);
void FLASH_ClearFlag(uint32_t FLASH_FLAG);
FLASH_Status FLASH_GetStatus(void);
FLASH_Status FLASH_WaitForLastOperation(void);
#ifdef __cplusplus
}
#endif
#endif /* __STM32F2xx_FLASH_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
@@ -1,411 +1,411 @@
/**
******************************************************************************
* @file stm32f2xx_gpio.h
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file contains all the functions prototypes for the GPIO firmware
* library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F2xx_GPIO_H
#define __STM32F2xx_GPIO_H
#if defined(__cplusplus) && !defined(SIMU)
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "../../CMSIS/Device/ST/STM32F2xx/Include/stm32f2xx.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @addtogroup GPIO
* @{
*/
/* Exported types ------------------------------------------------------------*/
#define IS_GPIO_ALL_PERIPH(PERIPH) (((PERIPH) == GPIOA) || \
((PERIPH) == GPIOB) || \
((PERIPH) == GPIOC) || \
((PERIPH) == GPIOD) || \
((PERIPH) == GPIOE) || \
((PERIPH) == GPIOF) || \
((PERIPH) == GPIOG) || \
((PERIPH) == GPIOH) || \
((PERIPH) == GPIOI))
/**
* @brief GPIO Configuration Mode enumeration
*/
typedef enum
{
GPIO_Mode_IN = 0x00, /*!< GPIO Input Mode */
GPIO_Mode_OUT = 0x01, /*!< GPIO Output Mode */
GPIO_Mode_AF = 0x02, /*!< GPIO Alternate function Mode */
GPIO_Mode_AN = 0x03 /*!< GPIO Analog Mode */
}GPIOMode_TypeDef;
#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_Mode_IN) || ((MODE) == GPIO_Mode_OUT) || \
((MODE) == GPIO_Mode_AF)|| ((MODE) == GPIO_Mode_AN))
/**
* @brief GPIO Output type enumeration
*/
typedef enum
{
GPIO_OType_PP = 0x00,
GPIO_OType_OD = 0x01
}GPIOOType_TypeDef;
#define IS_GPIO_OTYPE(OTYPE) (((OTYPE) == GPIO_OType_PP) || ((OTYPE) == GPIO_OType_OD))
/**
* @brief GPIO Output Maximum frequency enumeration
*/
typedef enum
{
GPIO_Speed_2MHz = 0x00, /*!< Low speed */
GPIO_Speed_25MHz = 0x01, /*!< Medium speed */
GPIO_Speed_50MHz = 0x02, /*!< Fast speed */
GPIO_Speed_100MHz = 0x03 /*!< High speed on 30 pF (80 MHz Output max speed on 15 pF) */
}GPIOSpeed_TypeDef;
#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_Speed_2MHz) || ((SPEED) == GPIO_Speed_25MHz) || \
((SPEED) == GPIO_Speed_50MHz)|| ((SPEED) == GPIO_Speed_100MHz))
/**
* @brief GPIO Configuration PullUp PullDown enumeration
*/
typedef enum
{
GPIO_PuPd_NOPULL = 0x00,
GPIO_PuPd_UP = 0x01,
GPIO_PuPd_DOWN = 0x02
}GPIOPuPd_TypeDef;
#define IS_GPIO_PUPD(PUPD) (((PUPD) == GPIO_PuPd_NOPULL) || ((PUPD) == GPIO_PuPd_UP) || \
((PUPD) == GPIO_PuPd_DOWN))
/**
* @brief GPIO Bit SET and Bit RESET enumeration
*/
typedef enum
{
Bit_RESET = 0,
Bit_SET
}BitAction;
#define IS_GPIO_BIT_ACTION(ACTION) (((ACTION) == Bit_RESET) || ((ACTION) == Bit_SET))
/**
* @brief GPIO Init structure definition
*/
typedef struct
{
uint32_t GPIO_Pin; /*!< Specifies the GPIO pins to be configured.
This parameter can be any value of @ref GPIO_pins_define */
GPIOMode_TypeDef GPIO_Mode; /*!< Specifies the operating mode for the selected pins.
This parameter can be a value of @ref GPIOMode_TypeDef */
GPIOSpeed_TypeDef GPIO_Speed; /*!< Specifies the speed for the selected pins.
This parameter can be a value of @ref GPIOSpeed_TypeDef */
GPIOOType_TypeDef GPIO_OType; /*!< Specifies the operating output type for the selected pins.
This parameter can be a value of @ref GPIOOType_TypeDef */
GPIOPuPd_TypeDef GPIO_PuPd; /*!< Specifies the operating Pull-up/Pull down for the selected pins.
This parameter can be a value of @ref GPIOPuPd_TypeDef */
}GPIO_InitTypeDef;
/* Exported constants --------------------------------------------------------*/
/** @defgroup GPIO_Exported_Constants
* @{
*/
/** @defgroup GPIO_pins_define
* @{
*/
#define GPIO_Pin_0 ((uint16_t)0x0001) /* Pin 0 selected */
#define GPIO_Pin_1 ((uint16_t)0x0002) /* Pin 1 selected */
#define GPIO_Pin_2 ((uint16_t)0x0004) /* Pin 2 selected */
#define GPIO_Pin_3 ((uint16_t)0x0008) /* Pin 3 selected */
#define GPIO_Pin_4 ((uint16_t)0x0010) /* Pin 4 selected */
#define GPIO_Pin_5 ((uint16_t)0x0020) /* Pin 5 selected */
#define GPIO_Pin_6 ((uint16_t)0x0040) /* Pin 6 selected */
#define GPIO_Pin_7 ((uint16_t)0x0080) /* Pin 7 selected */
#define GPIO_Pin_8 ((uint16_t)0x0100) /* Pin 8 selected */
#define GPIO_Pin_9 ((uint16_t)0x0200) /* Pin 9 selected */
#define GPIO_Pin_10 ((uint16_t)0x0400) /* Pin 10 selected */
#define GPIO_Pin_11 ((uint16_t)0x0800) /* Pin 11 selected */
#define GPIO_Pin_12 ((uint16_t)0x1000) /* Pin 12 selected */
#define GPIO_Pin_13 ((uint16_t)0x2000) /* Pin 13 selected */
#define GPIO_Pin_14 ((uint16_t)0x4000) /* Pin 14 selected */
#define GPIO_Pin_15 ((uint16_t)0x8000) /* Pin 15 selected */
#define GPIO_Pin_All ((uint16_t)0xFFFF) /* All pins selected */
#define IS_GPIO_PIN(PIN) ((((PIN) & (uint16_t)0x00) == 0x00) && ((PIN) != (uint16_t)0x00))
#define IS_GET_GPIO_PIN(PIN) (((PIN) == GPIO_Pin_0) || \
((PIN) == GPIO_Pin_1) || \
((PIN) == GPIO_Pin_2) || \
((PIN) == GPIO_Pin_3) || \
((PIN) == GPIO_Pin_4) || \
((PIN) == GPIO_Pin_5) || \
((PIN) == GPIO_Pin_6) || \
((PIN) == GPIO_Pin_7) || \
((PIN) == GPIO_Pin_8) || \
((PIN) == GPIO_Pin_9) || \
((PIN) == GPIO_Pin_10) || \
((PIN) == GPIO_Pin_11) || \
((PIN) == GPIO_Pin_12) || \
((PIN) == GPIO_Pin_13) || \
((PIN) == GPIO_Pin_14) || \
((PIN) == GPIO_Pin_15))
/**
* @}
*/
/** @defgroup GPIO_Pin_sources
* @{
*/
#define GPIO_PinSource0 ((uint8_t)0x00)
#define GPIO_PinSource1 ((uint8_t)0x01)
#define GPIO_PinSource2 ((uint8_t)0x02)
#define GPIO_PinSource3 ((uint8_t)0x03)
#define GPIO_PinSource4 ((uint8_t)0x04)
#define GPIO_PinSource5 ((uint8_t)0x05)
#define GPIO_PinSource6 ((uint8_t)0x06)
#define GPIO_PinSource7 ((uint8_t)0x07)
#define GPIO_PinSource8 ((uint8_t)0x08)
#define GPIO_PinSource9 ((uint8_t)0x09)
#define GPIO_PinSource10 ((uint8_t)0x0A)
#define GPIO_PinSource11 ((uint8_t)0x0B)
#define GPIO_PinSource12 ((uint8_t)0x0C)
#define GPIO_PinSource13 ((uint8_t)0x0D)
#define GPIO_PinSource14 ((uint8_t)0x0E)
#define GPIO_PinSource15 ((uint8_t)0x0F)
#define IS_GPIO_PIN_SOURCE(PINSOURCE) (((PINSOURCE) == GPIO_PinSource0) || \
((PINSOURCE) == GPIO_PinSource1) || \
((PINSOURCE) == GPIO_PinSource2) || \
((PINSOURCE) == GPIO_PinSource3) || \
((PINSOURCE) == GPIO_PinSource4) || \
((PINSOURCE) == GPIO_PinSource5) || \
((PINSOURCE) == GPIO_PinSource6) || \
((PINSOURCE) == GPIO_PinSource7) || \
((PINSOURCE) == GPIO_PinSource8) || \
((PINSOURCE) == GPIO_PinSource9) || \
((PINSOURCE) == GPIO_PinSource10) || \
((PINSOURCE) == GPIO_PinSource11) || \
((PINSOURCE) == GPIO_PinSource12) || \
((PINSOURCE) == GPIO_PinSource13) || \
((PINSOURCE) == GPIO_PinSource14) || \
((PINSOURCE) == GPIO_PinSource15))
/**
* @}
*/
/** @defgroup GPIO_Alternat_function_selection_define
* @{
*/
/**
* @brief AF 0 selection
*/
#define GPIO_AF_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */
#define GPIO_AF_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
#define GPIO_AF_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
#define GPIO_AF_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
#define GPIO_AF_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
/**
* @brief AF 1 selection
*/
#define GPIO_AF_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */
#define GPIO_AF_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */
/**
* @brief AF 2 selection
*/
#define GPIO_AF_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */
#define GPIO_AF_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */
#define GPIO_AF_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */
/**
* @brief AF 3 selection
*/
#define GPIO_AF_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */
#define GPIO_AF_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */
#define GPIO_AF_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */
#define GPIO_AF_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */
/**
* @brief AF 4 selection
*/
#define GPIO_AF_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
#define GPIO_AF_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */
#define GPIO_AF_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */
/**
* @brief AF 5 selection
*/
#define GPIO_AF_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */
#define GPIO_AF_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */
/**
* @brief AF 6 selection
*/
#define GPIO_AF_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */
/**
* @brief AF 7 selection
*/
#define GPIO_AF_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
#define GPIO_AF_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
#define GPIO_AF_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */
/**
* @brief AF 8 selection
*/
#define GPIO_AF_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */
#define GPIO_AF_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */
#define GPIO_AF_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */
/**
* @brief AF 9 selection
*/
#define GPIO_AF_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */
#define GPIO_AF_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */
#define GPIO_AF_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */
#define GPIO_AF_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */
#define GPIO_AF_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */
/**
* @brief AF 10 selection
*/
#define GPIO_AF_OTG_FS ((uint8_t)0xA) /* OTG_FS Alternate Function mapping */
#define GPIO_AF_OTG_HS ((uint8_t)0xA) /* OTG_HS Alternate Function mapping */
/**
* @brief AF 11 selection
*/
#define GPIO_AF_ETH ((uint8_t)0x0B) /* ETHERNET Alternate Function mapping */
/**
* @brief AF 12 selection
*/
#define GPIO_AF_FSMC ((uint8_t)0xC) /* FSMC Alternate Function mapping */
#define GPIO_AF_OTG_HS_FS ((uint8_t)0xC) /* OTG HS configured in FS, Alternate Function mapping */
#define GPIO_AF_SDIO ((uint8_t)0xC) /* SDIO Alternate Function mapping */
/**
* @brief AF 13 selection
*/
#define GPIO_AF_DCMI ((uint8_t)0x0D) /* DCMI Alternate Function mapping */
/**
* @brief AF 15 selection
*/
#define GPIO_AF_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
#define IS_GPIO_AF(AF) (((AF) == GPIO_AF_RTC_50Hz) || ((AF) == GPIO_AF_TIM14) || \
((AF) == GPIO_AF_MCO) || ((AF) == GPIO_AF_TAMPER) || \
((AF) == GPIO_AF_SWJ) || ((AF) == GPIO_AF_TRACE) || \
((AF) == GPIO_AF_TIM1) || ((AF) == GPIO_AF_TIM2) || \
((AF) == GPIO_AF_TIM3) || ((AF) == GPIO_AF_TIM4) || \
((AF) == GPIO_AF_TIM5) || ((AF) == GPIO_AF_TIM8) || \
((AF) == GPIO_AF_I2C1) || ((AF) == GPIO_AF_I2C2) || \
((AF) == GPIO_AF_I2C3) || ((AF) == GPIO_AF_SPI1) || \
((AF) == GPIO_AF_SPI2) || ((AF) == GPIO_AF_TIM13) || \
((AF) == GPIO_AF_SPI3) || ((AF) == GPIO_AF_TIM14) || \
((AF) == GPIO_AF_USART1) || ((AF) == GPIO_AF_USART2) || \
((AF) == GPIO_AF_USART3) || ((AF) == GPIO_AF_UART4) || \
((AF) == GPIO_AF_UART5) || ((AF) == GPIO_AF_USART6) || \
((AF) == GPIO_AF_CAN1) || ((AF) == GPIO_AF_CAN2) || \
((AF) == GPIO_AF_OTG_FS) || ((AF) == GPIO_AF_OTG_HS) || \
((AF) == GPIO_AF_ETH) || ((AF) == GPIO_AF_FSMC) || \
((AF) == GPIO_AF_OTG_HS_FS) || ((AF) == GPIO_AF_SDIO) || \
((AF) == GPIO_AF_DCMI) || ((AF) == GPIO_AF_EVENTOUT))
/**
* @}
*/
/** @defgroup GPIO_Legacy
* @{
*/
#define GPIO_Mode_AIN GPIO_Mode_AN
#define GPIO_AF_OTG1_FS GPIO_AF_OTG_FS
#define GPIO_AF_OTG2_HS GPIO_AF_OTG_HS
#define GPIO_AF_OTG2_FS GPIO_AF_OTG_HS_FS
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/* Function used to set the GPIO configuration to the default reset state ****/
void GPIO_DeInit(GPIO_TypeDef* GPIOx);
/* Initialization and Configuration functions *********************************/
void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct);
void GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct);
void GPIO_PinLockConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
/* GPIO Read and Write functions **********************************************/
uint8_t GPIO_ReadInputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
uint16_t GPIO_ReadInputData(GPIO_TypeDef* GPIOx);
uint8_t GPIO_ReadOutputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
uint16_t GPIO_ReadOutputData(GPIO_TypeDef* GPIOx);
void GPIO_SetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
void GPIO_ResetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
void GPIO_WriteBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, BitAction BitVal);
void GPIO_Write(GPIO_TypeDef* GPIOx, uint16_t PortVal);
void GPIO_ToggleBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
/* GPIO Alternate functions configuration function ****************************/
void GPIO_PinAFConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_PinSource, uint8_t GPIO_AF);
#if defined(__cplusplus) && !defined(SIMU)
}
#endif
#endif /*__STM32F2xx_GPIO_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
/**
******************************************************************************
* @file stm32f2xx_gpio.h
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file contains all the functions prototypes for the GPIO firmware
* library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F2xx_GPIO_H
#define __STM32F2xx_GPIO_H
#if defined(__cplusplus) && !defined(SIMU)
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "../../CMSIS/Device/ST/STM32F2xx/Include/stm32f2xx.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @addtogroup GPIO
* @{
*/
/* Exported types ------------------------------------------------------------*/
#define IS_GPIO_ALL_PERIPH(PERIPH) (((PERIPH) == GPIOA) || \
((PERIPH) == GPIOB) || \
((PERIPH) == GPIOC) || \
((PERIPH) == GPIOD) || \
((PERIPH) == GPIOE) || \
((PERIPH) == GPIOF) || \
((PERIPH) == GPIOG) || \
((PERIPH) == GPIOH) || \
((PERIPH) == GPIOI))
/**
* @brief GPIO Configuration Mode enumeration
*/
typedef enum
{
GPIO_Mode_IN = 0x00, /*!< GPIO Input Mode */
GPIO_Mode_OUT = 0x01, /*!< GPIO Output Mode */
GPIO_Mode_AF = 0x02, /*!< GPIO Alternate function Mode */
GPIO_Mode_AN = 0x03 /*!< GPIO Analog Mode */
}GPIOMode_TypeDef;
#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_Mode_IN) || ((MODE) == GPIO_Mode_OUT) || \
((MODE) == GPIO_Mode_AF)|| ((MODE) == GPIO_Mode_AN))
/**
* @brief GPIO Output type enumeration
*/
typedef enum
{
GPIO_OType_PP = 0x00,
GPIO_OType_OD = 0x01
}GPIOOType_TypeDef;
#define IS_GPIO_OTYPE(OTYPE) (((OTYPE) == GPIO_OType_PP) || ((OTYPE) == GPIO_OType_OD))
/**
* @brief GPIO Output Maximum frequency enumeration
*/
typedef enum
{
GPIO_Speed_2MHz = 0x00, /*!< Low speed */
GPIO_Speed_25MHz = 0x01, /*!< Medium speed */
GPIO_Speed_50MHz = 0x02, /*!< Fast speed */
GPIO_Speed_100MHz = 0x03 /*!< High speed on 30 pF (80 MHz Output max speed on 15 pF) */
}GPIOSpeed_TypeDef;
#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_Speed_2MHz) || ((SPEED) == GPIO_Speed_25MHz) || \
((SPEED) == GPIO_Speed_50MHz)|| ((SPEED) == GPIO_Speed_100MHz))
/**
* @brief GPIO Configuration PullUp PullDown enumeration
*/
typedef enum
{
GPIO_PuPd_NOPULL = 0x00,
GPIO_PuPd_UP = 0x01,
GPIO_PuPd_DOWN = 0x02
}GPIOPuPd_TypeDef;
#define IS_GPIO_PUPD(PUPD) (((PUPD) == GPIO_PuPd_NOPULL) || ((PUPD) == GPIO_PuPd_UP) || \
((PUPD) == GPIO_PuPd_DOWN))
/**
* @brief GPIO Bit SET and Bit RESET enumeration
*/
typedef enum
{
Bit_RESET = 0,
Bit_SET
}BitAction;
#define IS_GPIO_BIT_ACTION(ACTION) (((ACTION) == Bit_RESET) || ((ACTION) == Bit_SET))
/**
* @brief GPIO Init structure definition
*/
typedef struct
{
uint32_t GPIO_Pin; /*!< Specifies the GPIO pins to be configured.
This parameter can be any value of @ref GPIO_pins_define */
GPIOMode_TypeDef GPIO_Mode; /*!< Specifies the operating mode for the selected pins.
This parameter can be a value of @ref GPIOMode_TypeDef */
GPIOSpeed_TypeDef GPIO_Speed; /*!< Specifies the speed for the selected pins.
This parameter can be a value of @ref GPIOSpeed_TypeDef */
GPIOOType_TypeDef GPIO_OType; /*!< Specifies the operating output type for the selected pins.
This parameter can be a value of @ref GPIOOType_TypeDef */
GPIOPuPd_TypeDef GPIO_PuPd; /*!< Specifies the operating Pull-up/Pull down for the selected pins.
This parameter can be a value of @ref GPIOPuPd_TypeDef */
}GPIO_InitTypeDef;
/* Exported constants --------------------------------------------------------*/
/** @defgroup GPIO_Exported_Constants
* @{
*/
/** @defgroup GPIO_pins_define
* @{
*/
#define GPIO_Pin_0 ((uint16_t)0x0001) /* Pin 0 selected */
#define GPIO_Pin_1 ((uint16_t)0x0002) /* Pin 1 selected */
#define GPIO_Pin_2 ((uint16_t)0x0004) /* Pin 2 selected */
#define GPIO_Pin_3 ((uint16_t)0x0008) /* Pin 3 selected */
#define GPIO_Pin_4 ((uint16_t)0x0010) /* Pin 4 selected */
#define GPIO_Pin_5 ((uint16_t)0x0020) /* Pin 5 selected */
#define GPIO_Pin_6 ((uint16_t)0x0040) /* Pin 6 selected */
#define GPIO_Pin_7 ((uint16_t)0x0080) /* Pin 7 selected */
#define GPIO_Pin_8 ((uint16_t)0x0100) /* Pin 8 selected */
#define GPIO_Pin_9 ((uint16_t)0x0200) /* Pin 9 selected */
#define GPIO_Pin_10 ((uint16_t)0x0400) /* Pin 10 selected */
#define GPIO_Pin_11 ((uint16_t)0x0800) /* Pin 11 selected */
#define GPIO_Pin_12 ((uint16_t)0x1000) /* Pin 12 selected */
#define GPIO_Pin_13 ((uint16_t)0x2000) /* Pin 13 selected */
#define GPIO_Pin_14 ((uint16_t)0x4000) /* Pin 14 selected */
#define GPIO_Pin_15 ((uint16_t)0x8000) /* Pin 15 selected */
#define GPIO_Pin_All ((uint16_t)0xFFFF) /* All pins selected */
#define IS_GPIO_PIN(PIN) ((((PIN) & (uint16_t)0x00) == 0x00) && ((PIN) != (uint16_t)0x00))
#define IS_GET_GPIO_PIN(PIN) (((PIN) == GPIO_Pin_0) || \
((PIN) == GPIO_Pin_1) || \
((PIN) == GPIO_Pin_2) || \
((PIN) == GPIO_Pin_3) || \
((PIN) == GPIO_Pin_4) || \
((PIN) == GPIO_Pin_5) || \
((PIN) == GPIO_Pin_6) || \
((PIN) == GPIO_Pin_7) || \
((PIN) == GPIO_Pin_8) || \
((PIN) == GPIO_Pin_9) || \
((PIN) == GPIO_Pin_10) || \
((PIN) == GPIO_Pin_11) || \
((PIN) == GPIO_Pin_12) || \
((PIN) == GPIO_Pin_13) || \
((PIN) == GPIO_Pin_14) || \
((PIN) == GPIO_Pin_15))
/**
* @}
*/
/** @defgroup GPIO_Pin_sources
* @{
*/
#define GPIO_PinSource0 ((uint8_t)0x00)
#define GPIO_PinSource1 ((uint8_t)0x01)
#define GPIO_PinSource2 ((uint8_t)0x02)
#define GPIO_PinSource3 ((uint8_t)0x03)
#define GPIO_PinSource4 ((uint8_t)0x04)
#define GPIO_PinSource5 ((uint8_t)0x05)
#define GPIO_PinSource6 ((uint8_t)0x06)
#define GPIO_PinSource7 ((uint8_t)0x07)
#define GPIO_PinSource8 ((uint8_t)0x08)
#define GPIO_PinSource9 ((uint8_t)0x09)
#define GPIO_PinSource10 ((uint8_t)0x0A)
#define GPIO_PinSource11 ((uint8_t)0x0B)
#define GPIO_PinSource12 ((uint8_t)0x0C)
#define GPIO_PinSource13 ((uint8_t)0x0D)
#define GPIO_PinSource14 ((uint8_t)0x0E)
#define GPIO_PinSource15 ((uint8_t)0x0F)
#define IS_GPIO_PIN_SOURCE(PINSOURCE) (((PINSOURCE) == GPIO_PinSource0) || \
((PINSOURCE) == GPIO_PinSource1) || \
((PINSOURCE) == GPIO_PinSource2) || \
((PINSOURCE) == GPIO_PinSource3) || \
((PINSOURCE) == GPIO_PinSource4) || \
((PINSOURCE) == GPIO_PinSource5) || \
((PINSOURCE) == GPIO_PinSource6) || \
((PINSOURCE) == GPIO_PinSource7) || \
((PINSOURCE) == GPIO_PinSource8) || \
((PINSOURCE) == GPIO_PinSource9) || \
((PINSOURCE) == GPIO_PinSource10) || \
((PINSOURCE) == GPIO_PinSource11) || \
((PINSOURCE) == GPIO_PinSource12) || \
((PINSOURCE) == GPIO_PinSource13) || \
((PINSOURCE) == GPIO_PinSource14) || \
((PINSOURCE) == GPIO_PinSource15))
/**
* @}
*/
/** @defgroup GPIO_Alternat_function_selection_define
* @{
*/
/**
* @brief AF 0 selection
*/
#define GPIO_AF_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */
#define GPIO_AF_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
#define GPIO_AF_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
#define GPIO_AF_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
#define GPIO_AF_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
/**
* @brief AF 1 selection
*/
#define GPIO_AF_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */
#define GPIO_AF_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */
/**
* @brief AF 2 selection
*/
#define GPIO_AF_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */
#define GPIO_AF_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */
#define GPIO_AF_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */
/**
* @brief AF 3 selection
*/
#define GPIO_AF_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */
#define GPIO_AF_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */
#define GPIO_AF_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */
#define GPIO_AF_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */
/**
* @brief AF 4 selection
*/
#define GPIO_AF_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
#define GPIO_AF_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */
#define GPIO_AF_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */
/**
* @brief AF 5 selection
*/
#define GPIO_AF_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */
#define GPIO_AF_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */
/**
* @brief AF 6 selection
*/
#define GPIO_AF_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */
/**
* @brief AF 7 selection
*/
#define GPIO_AF_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
#define GPIO_AF_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
#define GPIO_AF_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */
/**
* @brief AF 8 selection
*/
#define GPIO_AF_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */
#define GPIO_AF_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */
#define GPIO_AF_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */
/**
* @brief AF 9 selection
*/
#define GPIO_AF_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */
#define GPIO_AF_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */
#define GPIO_AF_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */
#define GPIO_AF_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */
#define GPIO_AF_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */
/**
* @brief AF 10 selection
*/
#define GPIO_AF_OTG_FS ((uint8_t)0xA) /* OTG_FS Alternate Function mapping */
#define GPIO_AF_OTG_HS ((uint8_t)0xA) /* OTG_HS Alternate Function mapping */
/**
* @brief AF 11 selection
*/
#define GPIO_AF_ETH ((uint8_t)0x0B) /* ETHERNET Alternate Function mapping */
/**
* @brief AF 12 selection
*/
#define GPIO_AF_FSMC ((uint8_t)0xC) /* FSMC Alternate Function mapping */
#define GPIO_AF_OTG_HS_FS ((uint8_t)0xC) /* OTG HS configured in FS, Alternate Function mapping */
#define GPIO_AF_SDIO ((uint8_t)0xC) /* SDIO Alternate Function mapping */
/**
* @brief AF 13 selection
*/
#define GPIO_AF_DCMI ((uint8_t)0x0D) /* DCMI Alternate Function mapping */
/**
* @brief AF 15 selection
*/
#define GPIO_AF_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
#define IS_GPIO_AF(AF) (((AF) == GPIO_AF_RTC_50Hz) || ((AF) == GPIO_AF_TIM14) || \
((AF) == GPIO_AF_MCO) || ((AF) == GPIO_AF_TAMPER) || \
((AF) == GPIO_AF_SWJ) || ((AF) == GPIO_AF_TRACE) || \
((AF) == GPIO_AF_TIM1) || ((AF) == GPIO_AF_TIM2) || \
((AF) == GPIO_AF_TIM3) || ((AF) == GPIO_AF_TIM4) || \
((AF) == GPIO_AF_TIM5) || ((AF) == GPIO_AF_TIM8) || \
((AF) == GPIO_AF_I2C1) || ((AF) == GPIO_AF_I2C2) || \
((AF) == GPIO_AF_I2C3) || ((AF) == GPIO_AF_SPI1) || \
((AF) == GPIO_AF_SPI2) || ((AF) == GPIO_AF_TIM13) || \
((AF) == GPIO_AF_SPI3) || ((AF) == GPIO_AF_TIM14) || \
((AF) == GPIO_AF_USART1) || ((AF) == GPIO_AF_USART2) || \
((AF) == GPIO_AF_USART3) || ((AF) == GPIO_AF_UART4) || \
((AF) == GPIO_AF_UART5) || ((AF) == GPIO_AF_USART6) || \
((AF) == GPIO_AF_CAN1) || ((AF) == GPIO_AF_CAN2) || \
((AF) == GPIO_AF_OTG_FS) || ((AF) == GPIO_AF_OTG_HS) || \
((AF) == GPIO_AF_ETH) || ((AF) == GPIO_AF_FSMC) || \
((AF) == GPIO_AF_OTG_HS_FS) || ((AF) == GPIO_AF_SDIO) || \
((AF) == GPIO_AF_DCMI) || ((AF) == GPIO_AF_EVENTOUT))
/**
* @}
*/
/** @defgroup GPIO_Legacy
* @{
*/
#define GPIO_Mode_AIN GPIO_Mode_AN
#define GPIO_AF_OTG1_FS GPIO_AF_OTG_FS
#define GPIO_AF_OTG2_HS GPIO_AF_OTG_HS
#define GPIO_AF_OTG2_FS GPIO_AF_OTG_HS_FS
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/* Function used to set the GPIO configuration to the default reset state ****/
void GPIO_DeInit(GPIO_TypeDef* GPIOx);
/* Initialization and Configuration functions *********************************/
void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct);
void GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct);
void GPIO_PinLockConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
/* GPIO Read and Write functions **********************************************/
uint8_t GPIO_ReadInputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
uint16_t GPIO_ReadInputData(GPIO_TypeDef* GPIOx);
uint8_t GPIO_ReadOutputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
uint16_t GPIO_ReadOutputData(GPIO_TypeDef* GPIOx);
void GPIO_SetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
void GPIO_ResetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
void GPIO_WriteBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, BitAction BitVal);
void GPIO_Write(GPIO_TypeDef* GPIOx, uint16_t PortVal);
void GPIO_ToggleBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
/* GPIO Alternate functions configuration function ****************************/
void GPIO_PinAFConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_PinSource, uint8_t GPIO_AF);
#if defined(__cplusplus) && !defined(SIMU)
}
#endif
#endif /*__STM32F2xx_GPIO_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
@@ -1,250 +1,250 @@
/**
******************************************************************************
* @file stm32f2xx_hash.h
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file contains all the functions prototypes for the HASH
* firmware library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F2xx_HASH_H
#define __STM32F2xx_HASH_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f2xx.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @addtogroup HASH
* @{
*/
/* Exported types ------------------------------------------------------------*/
/**
* @brief HASH Init structure definition
*/
typedef struct
{
uint32_t HASH_AlgoSelection; /*!< SHA-1 or MD5. This parameter can be a value
of @ref HASH_Algo_Selection */
uint32_t HASH_AlgoMode; /*!< HASH or HMAC. This parameter can be a value
of @ref HASH_processor_Algorithm_Mode */
uint32_t HASH_DataType; /*!< 32-bit data, 16-bit data, 8-bit data or
bit-string. This parameter can be a value of
@ref HASH_Data_Type */
uint32_t HASH_HMACKeyType; /*!< HMAC Short key or HMAC Long Key. This parameter
can be a value of @ref HASH_HMAC_Long_key_only_for_HMAC_mode */
}HASH_InitTypeDef;
/**
* @brief HASH message digest result structure definition
*/
typedef struct
{
uint32_t Data[5]; /*!< Message digest result : 5x 32bit words for SHA1 or
4x 32bit words for MD5 */
} HASH_MsgDigest;
/**
* @brief HASH context swapping structure definition
*/
typedef struct
{
uint32_t HASH_IMR;
uint32_t HASH_STR;
uint32_t HASH_CR;
uint32_t HASH_CSR[51];
}HASH_Context;
/* Exported constants --------------------------------------------------------*/
/** @defgroup HASH_Exported_Constants
* @{
*/
/** @defgroup HASH_Algo_Selection
* @{
*/
#define HASH_AlgoSelection_SHA1 ((uint16_t)0x0000) /*!< HASH function is SHA1 */
#define HASH_AlgoSelection_MD5 ((uint16_t)0x0080) /*!< HASH function is MD5 */
#define IS_HASH_ALGOSELECTION(ALGOSELECTION) (((ALGOSELECTION) == HASH_AlgoSelection_SHA1) || \
((ALGOSELECTION) == HASH_AlgoSelection_MD5))
/**
* @}
*/
/** @defgroup HASH_processor_Algorithm_Mode
* @{
*/
#define HASH_AlgoMode_HASH ((uint16_t)0x0000) /*!< Algorithm is HASH */
#define HASH_AlgoMode_HMAC ((uint16_t)0x0040) /*!< Algorithm is HMAC */
#define IS_HASH_ALGOMODE(ALGOMODE) (((ALGOMODE) == HASH_AlgoMode_HASH) || \
((ALGOMODE) == HASH_AlgoMode_HMAC))
/**
* @}
*/
/** @defgroup HASH_Data_Type
* @{
*/
#define HASH_DataType_32b ((uint16_t)0x0000)
#define HASH_DataType_16b ((uint16_t)0x0010)
#define HASH_DataType_8b ((uint16_t)0x0020)
#define HASH_DataType_1b ((uint16_t)0x0030)
#define IS_HASH_DATATYPE(DATATYPE) (((DATATYPE) == HASH_DataType_32b)|| \
((DATATYPE) == HASH_DataType_16b)|| \
((DATATYPE) == HASH_DataType_8b)|| \
((DATATYPE) == HASH_DataType_1b))
/**
* @}
*/
/** @defgroup HASH_HMAC_Long_key_only_for_HMAC_mode
* @{
*/
#define HASH_HMACKeyType_ShortKey ((uint32_t)0x00000000) /*!< HMAC Key is <= 64 bytes */
#define HASH_HMACKeyType_LongKey ((uint32_t)0x00010000) /*!< HMAC Key is > 64 bytes */
#define IS_HASH_HMAC_KEYTYPE(KEYTYPE) (((KEYTYPE) == HASH_HMACKeyType_ShortKey) || \
((KEYTYPE) == HASH_HMACKeyType_LongKey))
/**
* @}
*/
/** @defgroup Number_of_valid_bits_in_last_word_of_the_message
* @{
*/
#define IS_HASH_VALIDBITSNUMBER(VALIDBITS) ((VALIDBITS) <= 0x1F)
/**
* @}
*/
/** @defgroup HASH_interrupts_definition
* @{
*/
#define HASH_IT_DINI ((uint8_t)0x01) /*!< A new block can be entered into the input buffer (DIN)*/
#define HASH_IT_DCI ((uint8_t)0x02) /*!< Digest calculation complete */
#define IS_HASH_IT(IT) ((((IT) & (uint8_t)0xFC) == 0x00) && ((IT) != 0x00))
#define IS_HASH_GET_IT(IT) (((IT) == HASH_IT_DINI) || ((IT) == HASH_IT_DCI))
/**
* @}
*/
/** @defgroup HASH_flags_definition
* @{
*/
#define HASH_FLAG_DINIS ((uint16_t)0x0001) /*!< 16 locations are free in the DIN : A new block can be entered into the input buffer.*/
#define HASH_FLAG_DCIS ((uint16_t)0x0002) /*!< Digest calculation complete */
#define HASH_FLAG_DMAS ((uint16_t)0x0004) /*!< DMA interface is enabled (DMAE=1) or a transfer is ongoing */
#define HASH_FLAG_BUSY ((uint16_t)0x0008) /*!< The hash core is Busy : processing a block of data */
#define HASH_FLAG_DINNE ((uint16_t)0x1000) /*!< DIN not empty : The input buffer contains at least one word of data */
#define IS_HASH_GET_FLAG(FLAG) (((FLAG) == HASH_FLAG_DINIS) || \
((FLAG) == HASH_FLAG_DCIS) || \
((FLAG) == HASH_FLAG_DMAS) || \
((FLAG) == HASH_FLAG_BUSY) || \
((FLAG) == HASH_FLAG_DINNE))
#define IS_HASH_CLEAR_FLAG(FLAG)(((FLAG) == HASH_FLAG_DINIS) || \
((FLAG) == HASH_FLAG_DCIS))
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/* Function used to set the HASH configuration to the default reset state ****/
void HASH_DeInit(void);
/* HASH Configuration function ************************************************/
void HASH_Init(HASH_InitTypeDef* HASH_InitStruct);
void HASH_StructInit(HASH_InitTypeDef* HASH_InitStruct);
void HASH_Reset(void);
/* HASH Message Digest generation functions ***********************************/
void HASH_DataIn(uint32_t Data);
uint8_t HASH_GetInFIFOWordsNbr(void);
void HASH_SetLastWordValidBitsNbr(uint16_t ValidNumber);
void HASH_StartDigest(void);
void HASH_GetDigest(HASH_MsgDigest* HASH_MessageDigest);
/* HASH Context swapping functions ********************************************/
void HASH_SaveContext(HASH_Context* HASH_ContextSave);
void HASH_RestoreContext(HASH_Context* HASH_ContextRestore);
/* HASH's DMA interface function **********************************************/
void HASH_DMACmd(FunctionalState NewState);
/* HASH Interrupts and flags management functions *****************************/
void HASH_ITConfig(uint8_t HASH_IT, FunctionalState NewState);
FlagStatus HASH_GetFlagStatus(uint16_t HASH_FLAG);
void HASH_ClearFlag(uint16_t HASH_FLAG);
ITStatus HASH_GetITStatus(uint8_t HASH_IT);
void HASH_ClearITPendingBit(uint8_t HASH_IT);
/* High Level SHA1 functions **************************************************/
ErrorStatus HASH_SHA1(uint8_t *Input, uint32_t Ilen, uint8_t Output[20]);
ErrorStatus HMAC_SHA1(uint8_t *Key, uint32_t Keylen,
uint8_t *Input, uint32_t Ilen,
uint8_t Output[20]);
/* High Level MD5 functions ***************************************************/
ErrorStatus HASH_MD5(uint8_t *Input, uint32_t Ilen, uint8_t Output[16]);
ErrorStatus HMAC_MD5(uint8_t *Key, uint32_t Keylen,
uint8_t *Input, uint32_t Ilen,
uint8_t Output[16]);
#ifdef __cplusplus
}
#endif
#endif /*__STM32F2xx_HASH_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
/**
******************************************************************************
* @file stm32f2xx_hash.h
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file contains all the functions prototypes for the HASH
* firmware library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F2xx_HASH_H
#define __STM32F2xx_HASH_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f2xx.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @addtogroup HASH
* @{
*/
/* Exported types ------------------------------------------------------------*/
/**
* @brief HASH Init structure definition
*/
typedef struct
{
uint32_t HASH_AlgoSelection; /*!< SHA-1 or MD5. This parameter can be a value
of @ref HASH_Algo_Selection */
uint32_t HASH_AlgoMode; /*!< HASH or HMAC. This parameter can be a value
of @ref HASH_processor_Algorithm_Mode */
uint32_t HASH_DataType; /*!< 32-bit data, 16-bit data, 8-bit data or
bit-string. This parameter can be a value of
@ref HASH_Data_Type */
uint32_t HASH_HMACKeyType; /*!< HMAC Short key or HMAC Long Key. This parameter
can be a value of @ref HASH_HMAC_Long_key_only_for_HMAC_mode */
}HASH_InitTypeDef;
/**
* @brief HASH message digest result structure definition
*/
typedef struct
{
uint32_t Data[5]; /*!< Message digest result : 5x 32bit words for SHA1 or
4x 32bit words for MD5 */
} HASH_MsgDigest;
/**
* @brief HASH context swapping structure definition
*/
typedef struct
{
uint32_t HASH_IMR;
uint32_t HASH_STR;
uint32_t HASH_CR;
uint32_t HASH_CSR[51];
}HASH_Context;
/* Exported constants --------------------------------------------------------*/
/** @defgroup HASH_Exported_Constants
* @{
*/
/** @defgroup HASH_Algo_Selection
* @{
*/
#define HASH_AlgoSelection_SHA1 ((uint16_t)0x0000) /*!< HASH function is SHA1 */
#define HASH_AlgoSelection_MD5 ((uint16_t)0x0080) /*!< HASH function is MD5 */
#define IS_HASH_ALGOSELECTION(ALGOSELECTION) (((ALGOSELECTION) == HASH_AlgoSelection_SHA1) || \
((ALGOSELECTION) == HASH_AlgoSelection_MD5))
/**
* @}
*/
/** @defgroup HASH_processor_Algorithm_Mode
* @{
*/
#define HASH_AlgoMode_HASH ((uint16_t)0x0000) /*!< Algorithm is HASH */
#define HASH_AlgoMode_HMAC ((uint16_t)0x0040) /*!< Algorithm is HMAC */
#define IS_HASH_ALGOMODE(ALGOMODE) (((ALGOMODE) == HASH_AlgoMode_HASH) || \
((ALGOMODE) == HASH_AlgoMode_HMAC))
/**
* @}
*/
/** @defgroup HASH_Data_Type
* @{
*/
#define HASH_DataType_32b ((uint16_t)0x0000)
#define HASH_DataType_16b ((uint16_t)0x0010)
#define HASH_DataType_8b ((uint16_t)0x0020)
#define HASH_DataType_1b ((uint16_t)0x0030)
#define IS_HASH_DATATYPE(DATATYPE) (((DATATYPE) == HASH_DataType_32b)|| \
((DATATYPE) == HASH_DataType_16b)|| \
((DATATYPE) == HASH_DataType_8b)|| \
((DATATYPE) == HASH_DataType_1b))
/**
* @}
*/
/** @defgroup HASH_HMAC_Long_key_only_for_HMAC_mode
* @{
*/
#define HASH_HMACKeyType_ShortKey ((uint32_t)0x00000000) /*!< HMAC Key is <= 64 bytes */
#define HASH_HMACKeyType_LongKey ((uint32_t)0x00010000) /*!< HMAC Key is > 64 bytes */
#define IS_HASH_HMAC_KEYTYPE(KEYTYPE) (((KEYTYPE) == HASH_HMACKeyType_ShortKey) || \
((KEYTYPE) == HASH_HMACKeyType_LongKey))
/**
* @}
*/
/** @defgroup Number_of_valid_bits_in_last_word_of_the_message
* @{
*/
#define IS_HASH_VALIDBITSNUMBER(VALIDBITS) ((VALIDBITS) <= 0x1F)
/**
* @}
*/
/** @defgroup HASH_interrupts_definition
* @{
*/
#define HASH_IT_DINI ((uint8_t)0x01) /*!< A new block can be entered into the input buffer (DIN)*/
#define HASH_IT_DCI ((uint8_t)0x02) /*!< Digest calculation complete */
#define IS_HASH_IT(IT) ((((IT) & (uint8_t)0xFC) == 0x00) && ((IT) != 0x00))
#define IS_HASH_GET_IT(IT) (((IT) == HASH_IT_DINI) || ((IT) == HASH_IT_DCI))
/**
* @}
*/
/** @defgroup HASH_flags_definition
* @{
*/
#define HASH_FLAG_DINIS ((uint16_t)0x0001) /*!< 16 locations are free in the DIN : A new block can be entered into the input buffer.*/
#define HASH_FLAG_DCIS ((uint16_t)0x0002) /*!< Digest calculation complete */
#define HASH_FLAG_DMAS ((uint16_t)0x0004) /*!< DMA interface is enabled (DMAE=1) or a transfer is ongoing */
#define HASH_FLAG_BUSY ((uint16_t)0x0008) /*!< The hash core is Busy : processing a block of data */
#define HASH_FLAG_DINNE ((uint16_t)0x1000) /*!< DIN not empty : The input buffer contains at least one word of data */
#define IS_HASH_GET_FLAG(FLAG) (((FLAG) == HASH_FLAG_DINIS) || \
((FLAG) == HASH_FLAG_DCIS) || \
((FLAG) == HASH_FLAG_DMAS) || \
((FLAG) == HASH_FLAG_BUSY) || \
((FLAG) == HASH_FLAG_DINNE))
#define IS_HASH_CLEAR_FLAG(FLAG)(((FLAG) == HASH_FLAG_DINIS) || \
((FLAG) == HASH_FLAG_DCIS))
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/* Function used to set the HASH configuration to the default reset state ****/
void HASH_DeInit(void);
/* HASH Configuration function ************************************************/
void HASH_Init(HASH_InitTypeDef* HASH_InitStruct);
void HASH_StructInit(HASH_InitTypeDef* HASH_InitStruct);
void HASH_Reset(void);
/* HASH Message Digest generation functions ***********************************/
void HASH_DataIn(uint32_t Data);
uint8_t HASH_GetInFIFOWordsNbr(void);
void HASH_SetLastWordValidBitsNbr(uint16_t ValidNumber);
void HASH_StartDigest(void);
void HASH_GetDigest(HASH_MsgDigest* HASH_MessageDigest);
/* HASH Context swapping functions ********************************************/
void HASH_SaveContext(HASH_Context* HASH_ContextSave);
void HASH_RestoreContext(HASH_Context* HASH_ContextRestore);
/* HASH's DMA interface function **********************************************/
void HASH_DMACmd(FunctionalState NewState);
/* HASH Interrupts and flags management functions *****************************/
void HASH_ITConfig(uint8_t HASH_IT, FunctionalState NewState);
FlagStatus HASH_GetFlagStatus(uint16_t HASH_FLAG);
void HASH_ClearFlag(uint16_t HASH_FLAG);
ITStatus HASH_GetITStatus(uint8_t HASH_IT);
void HASH_ClearITPendingBit(uint8_t HASH_IT);
/* High Level SHA1 functions **************************************************/
ErrorStatus HASH_SHA1(uint8_t *Input, uint32_t Ilen, uint8_t Output[20]);
ErrorStatus HMAC_SHA1(uint8_t *Key, uint32_t Keylen,
uint8_t *Input, uint32_t Ilen,
uint8_t Output[20]);
/* High Level MD5 functions ***************************************************/
ErrorStatus HASH_MD5(uint8_t *Input, uint32_t Ilen, uint8_t Output[16]);
ErrorStatus HMAC_MD5(uint8_t *Key, uint32_t Keylen,
uint8_t *Input, uint32_t Ilen,
uint8_t Output[16]);
#ifdef __cplusplus
}
#endif
#endif /*__STM32F2xx_HASH_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
@@ -1,131 +1,131 @@
/**
******************************************************************************
* @file stm32f2xx_iwdg.h
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file contains all the functions prototypes for the IWDG
* firmware library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F2xx_IWDG_H
#define __STM32F2xx_IWDG_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f2xx.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @addtogroup IWDG
* @{
*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup IWDG_Exported_Constants
* @{
*/
/** @defgroup IWDG_WriteAccess
* @{
*/
#define IWDG_WriteAccess_Enable ((uint16_t)0x5555)
#define IWDG_WriteAccess_Disable ((uint16_t)0x0000)
#define IS_IWDG_WRITE_ACCESS(ACCESS) (((ACCESS) == IWDG_WriteAccess_Enable) || \
((ACCESS) == IWDG_WriteAccess_Disable))
/**
* @}
*/
/** @defgroup IWDG_prescaler
* @{
*/
#define IWDG_Prescaler_4 ((uint8_t)0x00)
#define IWDG_Prescaler_8 ((uint8_t)0x01)
#define IWDG_Prescaler_16 ((uint8_t)0x02)
#define IWDG_Prescaler_32 ((uint8_t)0x03)
#define IWDG_Prescaler_64 ((uint8_t)0x04)
#define IWDG_Prescaler_128 ((uint8_t)0x05)
#define IWDG_Prescaler_256 ((uint8_t)0x06)
#define IS_IWDG_PRESCALER(PRESCALER) (((PRESCALER) == IWDG_Prescaler_4) || \
((PRESCALER) == IWDG_Prescaler_8) || \
((PRESCALER) == IWDG_Prescaler_16) || \
((PRESCALER) == IWDG_Prescaler_32) || \
((PRESCALER) == IWDG_Prescaler_64) || \
((PRESCALER) == IWDG_Prescaler_128)|| \
((PRESCALER) == IWDG_Prescaler_256))
/**
* @}
*/
/** @defgroup IWDG_Flag
* @{
*/
#define IWDG_FLAG_PVU ((uint16_t)0x0001)
#define IWDG_FLAG_RVU ((uint16_t)0x0002)
#define IS_IWDG_FLAG(FLAG) (((FLAG) == IWDG_FLAG_PVU) || ((FLAG) == IWDG_FLAG_RVU))
#define IS_IWDG_RELOAD(RELOAD) ((RELOAD) <= 0xFFF)
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/* Prescaler and Counter configuration functions ******************************/
void IWDG_WriteAccessCmd(uint16_t IWDG_WriteAccess);
void IWDG_SetPrescaler(uint8_t IWDG_Prescaler);
void IWDG_SetReload(uint16_t Reload);
void IWDG_ReloadCounter(void);
/* IWDG activation function ***************************************************/
void IWDG_Enable(void);
/* Flag management function ***************************************************/
FlagStatus IWDG_GetFlagStatus(uint16_t IWDG_FLAG);
#ifdef __cplusplus
}
#endif
#endif /* __STM32F2xx_IWDG_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
/**
******************************************************************************
* @file stm32f2xx_iwdg.h
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file contains all the functions prototypes for the IWDG
* firmware library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F2xx_IWDG_H
#define __STM32F2xx_IWDG_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f2xx.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @addtogroup IWDG
* @{
*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup IWDG_Exported_Constants
* @{
*/
/** @defgroup IWDG_WriteAccess
* @{
*/
#define IWDG_WriteAccess_Enable ((uint16_t)0x5555)
#define IWDG_WriteAccess_Disable ((uint16_t)0x0000)
#define IS_IWDG_WRITE_ACCESS(ACCESS) (((ACCESS) == IWDG_WriteAccess_Enable) || \
((ACCESS) == IWDG_WriteAccess_Disable))
/**
* @}
*/
/** @defgroup IWDG_prescaler
* @{
*/
#define IWDG_Prescaler_4 ((uint8_t)0x00)
#define IWDG_Prescaler_8 ((uint8_t)0x01)
#define IWDG_Prescaler_16 ((uint8_t)0x02)
#define IWDG_Prescaler_32 ((uint8_t)0x03)
#define IWDG_Prescaler_64 ((uint8_t)0x04)
#define IWDG_Prescaler_128 ((uint8_t)0x05)
#define IWDG_Prescaler_256 ((uint8_t)0x06)
#define IS_IWDG_PRESCALER(PRESCALER) (((PRESCALER) == IWDG_Prescaler_4) || \
((PRESCALER) == IWDG_Prescaler_8) || \
((PRESCALER) == IWDG_Prescaler_16) || \
((PRESCALER) == IWDG_Prescaler_32) || \
((PRESCALER) == IWDG_Prescaler_64) || \
((PRESCALER) == IWDG_Prescaler_128)|| \
((PRESCALER) == IWDG_Prescaler_256))
/**
* @}
*/
/** @defgroup IWDG_Flag
* @{
*/
#define IWDG_FLAG_PVU ((uint16_t)0x0001)
#define IWDG_FLAG_RVU ((uint16_t)0x0002)
#define IS_IWDG_FLAG(FLAG) (((FLAG) == IWDG_FLAG_PVU) || ((FLAG) == IWDG_FLAG_RVU))
#define IS_IWDG_RELOAD(RELOAD) ((RELOAD) <= 0xFFF)
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/* Prescaler and Counter configuration functions ******************************/
void IWDG_WriteAccessCmd(uint16_t IWDG_WriteAccess);
void IWDG_SetPrescaler(uint8_t IWDG_Prescaler);
void IWDG_SetReload(uint16_t Reload);
void IWDG_ReloadCounter(void);
/* IWDG activation function ***************************************************/
void IWDG_Enable(void);
/* Flag management function ***************************************************/
FlagStatus IWDG_GetFlagStatus(uint16_t IWDG_FLAG);
#ifdef __cplusplus
}
#endif
#endif /* __STM32F2xx_IWDG_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
@@ -1,166 +1,166 @@
/**
******************************************************************************
* @file stm32f2xx_pwr.h
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file contains all the functions prototypes for the PWR firmware
* library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F2xx_PWR_H
#define __STM32F2xx_PWR_H
#if defined(__cplusplus) && !defined(SIMU)
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "../../CMSIS/Device/ST/STM32F2xx/Include/stm32f2xx.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @addtogroup PWR
* @{
*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup PWR_Exported_Constants
* @{
*/
/** @defgroup PWR_PVD_detection_level
* @{
*/
#define PWR_PVDLevel_0 PWR_CR_PLS_LEV0
#define PWR_PVDLevel_1 PWR_CR_PLS_LEV1
#define PWR_PVDLevel_2 PWR_CR_PLS_LEV2
#define PWR_PVDLevel_3 PWR_CR_PLS_LEV3
#define PWR_PVDLevel_4 PWR_CR_PLS_LEV4
#define PWR_PVDLevel_5 PWR_CR_PLS_LEV5
#define PWR_PVDLevel_6 PWR_CR_PLS_LEV6
#define PWR_PVDLevel_7 PWR_CR_PLS_LEV7
#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLevel_0) || ((LEVEL) == PWR_PVDLevel_1)|| \
((LEVEL) == PWR_PVDLevel_2) || ((LEVEL) == PWR_PVDLevel_3)|| \
((LEVEL) == PWR_PVDLevel_4) || ((LEVEL) == PWR_PVDLevel_5)|| \
((LEVEL) == PWR_PVDLevel_6) || ((LEVEL) == PWR_PVDLevel_7))
/**
* @}
*/
/** @defgroup PWR_Regulator_state_in_STOP_mode
* @{
*/
#define PWR_Regulator_ON ((uint32_t)0x00000000)
#define PWR_Regulator_LowPower PWR_CR_LPDS
#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_Regulator_ON) || \
((REGULATOR) == PWR_Regulator_LowPower))
/**
* @}
*/
/** @defgroup PWR_STOP_mode_entry
* @{
*/
#define PWR_STOPEntry_WFI ((uint8_t)0x01)
#define PWR_STOPEntry_WFE ((uint8_t)0x02)
#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPEntry_WFI) || ((ENTRY) == PWR_STOPEntry_WFE))
/**
* @}
*/
/** @defgroup PWR_Flag
* @{
*/
#define PWR_FLAG_WU PWR_CSR_WUF
#define PWR_FLAG_SB PWR_CSR_SBF
#define PWR_FLAG_PVDO PWR_CSR_PVDO
#define PWR_FLAG_BRR PWR_CSR_BRR
#define IS_PWR_GET_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB) || \
((FLAG) == PWR_FLAG_PVDO) || ((FLAG) == PWR_FLAG_BRR))
#define IS_PWR_CLEAR_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB))
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/* Function used to set the PWR configuration to the default reset state ******/
void PWR_DeInit(void);
/* Backup Domain Access function **********************************************/
void PWR_BackupAccessCmd(FunctionalState NewState);
/* PVD configuration functions ************************************************/
void PWR_PVDLevelConfig(uint32_t PWR_PVDLevel);
void PWR_PVDCmd(FunctionalState NewState);
/* WakeUp pins configuration functions ****************************************/
void PWR_WakeUpPinCmd(FunctionalState NewState);
/* Backup Regulator configuration functions ***********************************/
void PWR_BackupRegulatorCmd(FunctionalState NewState);
/* FLASH Power Down configuration functions ***********************************/
void PWR_FlashPowerDownCmd(FunctionalState NewState);
/* Low Power modes configuration functions ************************************/
void PWR_EnterSTOPMode(uint32_t PWR_Regulator, uint8_t PWR_STOPEntry);
void PWR_EnterSTANDBYMode(void);
/* Flags management functions *************************************************/
FlagStatus PWR_GetFlagStatus(uint32_t PWR_FLAG);
void PWR_ClearFlag(uint32_t PWR_FLAG);
#if defined(__cplusplus) && !defined(SIMU)
}
#endif
#endif /* __STM32F2xx_PWR_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
/**
******************************************************************************
* @file stm32f2xx_pwr.h
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file contains all the functions prototypes for the PWR firmware
* library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F2xx_PWR_H
#define __STM32F2xx_PWR_H
#if defined(__cplusplus) && !defined(SIMU)
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "../../CMSIS/Device/ST/STM32F2xx/Include/stm32f2xx.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @addtogroup PWR
* @{
*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup PWR_Exported_Constants
* @{
*/
/** @defgroup PWR_PVD_detection_level
* @{
*/
#define PWR_PVDLevel_0 PWR_CR_PLS_LEV0
#define PWR_PVDLevel_1 PWR_CR_PLS_LEV1
#define PWR_PVDLevel_2 PWR_CR_PLS_LEV2
#define PWR_PVDLevel_3 PWR_CR_PLS_LEV3
#define PWR_PVDLevel_4 PWR_CR_PLS_LEV4
#define PWR_PVDLevel_5 PWR_CR_PLS_LEV5
#define PWR_PVDLevel_6 PWR_CR_PLS_LEV6
#define PWR_PVDLevel_7 PWR_CR_PLS_LEV7
#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLevel_0) || ((LEVEL) == PWR_PVDLevel_1)|| \
((LEVEL) == PWR_PVDLevel_2) || ((LEVEL) == PWR_PVDLevel_3)|| \
((LEVEL) == PWR_PVDLevel_4) || ((LEVEL) == PWR_PVDLevel_5)|| \
((LEVEL) == PWR_PVDLevel_6) || ((LEVEL) == PWR_PVDLevel_7))
/**
* @}
*/
/** @defgroup PWR_Regulator_state_in_STOP_mode
* @{
*/
#define PWR_Regulator_ON ((uint32_t)0x00000000)
#define PWR_Regulator_LowPower PWR_CR_LPDS
#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_Regulator_ON) || \
((REGULATOR) == PWR_Regulator_LowPower))
/**
* @}
*/
/** @defgroup PWR_STOP_mode_entry
* @{
*/
#define PWR_STOPEntry_WFI ((uint8_t)0x01)
#define PWR_STOPEntry_WFE ((uint8_t)0x02)
#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPEntry_WFI) || ((ENTRY) == PWR_STOPEntry_WFE))
/**
* @}
*/
/** @defgroup PWR_Flag
* @{
*/
#define PWR_FLAG_WU PWR_CSR_WUF
#define PWR_FLAG_SB PWR_CSR_SBF
#define PWR_FLAG_PVDO PWR_CSR_PVDO
#define PWR_FLAG_BRR PWR_CSR_BRR
#define IS_PWR_GET_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB) || \
((FLAG) == PWR_FLAG_PVDO) || ((FLAG) == PWR_FLAG_BRR))
#define IS_PWR_CLEAR_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB))
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/* Function used to set the PWR configuration to the default reset state ******/
void PWR_DeInit(void);
/* Backup Domain Access function **********************************************/
void PWR_BackupAccessCmd(FunctionalState NewState);
/* PVD configuration functions ************************************************/
void PWR_PVDLevelConfig(uint32_t PWR_PVDLevel);
void PWR_PVDCmd(FunctionalState NewState);
/* WakeUp pins configuration functions ****************************************/
void PWR_WakeUpPinCmd(FunctionalState NewState);
/* Backup Regulator configuration functions ***********************************/
void PWR_BackupRegulatorCmd(FunctionalState NewState);
/* FLASH Power Down configuration functions ***********************************/
void PWR_FlashPowerDownCmd(FunctionalState NewState);
/* Low Power modes configuration functions ************************************/
void PWR_EnterSTOPMode(uint32_t PWR_Regulator, uint8_t PWR_STOPEntry);
void PWR_EnterSTANDBYMode(void);
/* Flags management functions *************************************************/
FlagStatus PWR_GetFlagStatus(uint32_t PWR_FLAG);
void PWR_ClearFlag(uint32_t PWR_FLAG);
#if defined(__cplusplus) && !defined(SIMU)
}
#endif
#endif /* __STM32F2xx_PWR_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
@@ -1,120 +1,120 @@
/**
******************************************************************************
* @file stm32f2xx_rng.h
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file contains all the functions prototypes for the Random
* Number Generator(RNG) firmware library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F2xx_RNG_H
#define __STM32F2xx_RNG_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f2xx.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @addtogroup RNG
* @{
*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup RNG_Exported_Constants
* @{
*/
/** @defgroup RNG_flags_definition
* @{
*/
#define RNG_FLAG_DRDY ((uint8_t)0x0001) /*!< Data ready */
#define RNG_FLAG_CECS ((uint8_t)0x0002) /*!< Clock error current status */
#define RNG_FLAG_SECS ((uint8_t)0x0004) /*!< Seed error current status */
#define IS_RNG_GET_FLAG(RNG_FLAG) (((RNG_FLAG) == RNG_FLAG_DRDY) || \
((RNG_FLAG) == RNG_FLAG_CECS) || \
((RNG_FLAG) == RNG_FLAG_SECS))
#define IS_RNG_CLEAR_FLAG(RNG_FLAG) (((RNG_FLAG) == RNG_FLAG_CECS) || \
((RNG_FLAG) == RNG_FLAG_SECS))
/**
* @}
*/
/** @defgroup RNG_interrupts_definition
* @{
*/
#define RNG_IT_CEI ((uint8_t)0x20) /*!< Clock error interrupt */
#define RNG_IT_SEI ((uint8_t)0x40) /*!< Seed error interrupt */
#define IS_RNG_IT(IT) ((((IT) & (uint8_t)0x9F) == 0x00) && ((IT) != 0x00))
#define IS_RNG_GET_IT(RNG_IT) (((RNG_IT) == RNG_IT_CEI) || ((RNG_IT) == RNG_IT_SEI))
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/* Function used to set the RNG configuration to the default reset state *****/
void RNG_DeInit(void);
/* Configuration function *****************************************************/
void RNG_Cmd(FunctionalState NewState);
/* Get 32 bit Random number function ******************************************/
uint32_t RNG_GetRandomNumber(void);
/* Interrupts and flags management functions **********************************/
void RNG_ITConfig(FunctionalState NewState);
FlagStatus RNG_GetFlagStatus(uint8_t RNG_FLAG);
void RNG_ClearFlag(uint8_t RNG_FLAG);
ITStatus RNG_GetITStatus(uint8_t RNG_IT);
void RNG_ClearITPendingBit(uint8_t RNG_IT);
#ifdef __cplusplus
}
#endif
#endif /*__STM32F2xx_RNG_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
/**
******************************************************************************
* @file stm32f2xx_rng.h
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file contains all the functions prototypes for the Random
* Number Generator(RNG) firmware library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F2xx_RNG_H
#define __STM32F2xx_RNG_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f2xx.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @addtogroup RNG
* @{
*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup RNG_Exported_Constants
* @{
*/
/** @defgroup RNG_flags_definition
* @{
*/
#define RNG_FLAG_DRDY ((uint8_t)0x0001) /*!< Data ready */
#define RNG_FLAG_CECS ((uint8_t)0x0002) /*!< Clock error current status */
#define RNG_FLAG_SECS ((uint8_t)0x0004) /*!< Seed error current status */
#define IS_RNG_GET_FLAG(RNG_FLAG) (((RNG_FLAG) == RNG_FLAG_DRDY) || \
((RNG_FLAG) == RNG_FLAG_CECS) || \
((RNG_FLAG) == RNG_FLAG_SECS))
#define IS_RNG_CLEAR_FLAG(RNG_FLAG) (((RNG_FLAG) == RNG_FLAG_CECS) || \
((RNG_FLAG) == RNG_FLAG_SECS))
/**
* @}
*/
/** @defgroup RNG_interrupts_definition
* @{
*/
#define RNG_IT_CEI ((uint8_t)0x20) /*!< Clock error interrupt */
#define RNG_IT_SEI ((uint8_t)0x40) /*!< Seed error interrupt */
#define IS_RNG_IT(IT) ((((IT) & (uint8_t)0x9F) == 0x00) && ((IT) != 0x00))
#define IS_RNG_GET_IT(RNG_IT) (((RNG_IT) == RNG_IT_CEI) || ((RNG_IT) == RNG_IT_SEI))
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/* Function used to set the RNG configuration to the default reset state *****/
void RNG_DeInit(void);
/* Configuration function *****************************************************/
void RNG_Cmd(FunctionalState NewState);
/* Get 32 bit Random number function ******************************************/
uint32_t RNG_GetRandomNumber(void);
/* Interrupts and flags management functions **********************************/
void RNG_ITConfig(FunctionalState NewState);
FlagStatus RNG_GetFlagStatus(uint8_t RNG_FLAG);
void RNG_ClearFlag(uint8_t RNG_FLAG);
ITStatus RNG_GetITStatus(uint8_t RNG_IT);
void RNG_ClearITPendingBit(uint8_t RNG_IT);
#ifdef __cplusplus
}
#endif
#endif /*__STM32F2xx_RNG_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
@@ -1,179 +1,179 @@
/**
******************************************************************************
* @file stm32f2xx_syscfg.h
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file contains all the functions prototypes for the SYSCFG firmware
* library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F2xx_SYSCFG_H
#define __STM32F2xx_SYSCFG_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f2xx.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @addtogroup SYSCFG
* @{
*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup SYSCFG_Exported_Constants
* @{
*/
/** @defgroup SYSCFG_EXTI_Port_Sources
* @{
*/
#define EXTI_PortSourceGPIOA ((uint8_t)0x00)
#define EXTI_PortSourceGPIOB ((uint8_t)0x01)
#define EXTI_PortSourceGPIOC ((uint8_t)0x02)
#define EXTI_PortSourceGPIOD ((uint8_t)0x03)
#define EXTI_PortSourceGPIOE ((uint8_t)0x04)
#define EXTI_PortSourceGPIOF ((uint8_t)0x05)
#define EXTI_PortSourceGPIOG ((uint8_t)0x06)
#define EXTI_PortSourceGPIOH ((uint8_t)0x07)
#define EXTI_PortSourceGPIOI ((uint8_t)0x08)
#define IS_EXTI_PORT_SOURCE(PORTSOURCE) (((PORTSOURCE) == EXTI_PortSourceGPIOA) || \
((PORTSOURCE) == EXTI_PortSourceGPIOB) || \
((PORTSOURCE) == EXTI_PortSourceGPIOC) || \
((PORTSOURCE) == EXTI_PortSourceGPIOD) || \
((PORTSOURCE) == EXTI_PortSourceGPIOE) || \
((PORTSOURCE) == EXTI_PortSourceGPIOF) || \
((PORTSOURCE) == EXTI_PortSourceGPIOG) || \
((PORTSOURCE) == EXTI_PortSourceGPIOH) || \
((PORTSOURCE) == EXTI_PortSourceGPIOI))
/**
* @}
*/
/** @defgroup SYSCFG_EXTI_Pin_Sources
* @{
*/
#define EXTI_PinSource0 ((uint8_t)0x00)
#define EXTI_PinSource1 ((uint8_t)0x01)
#define EXTI_PinSource2 ((uint8_t)0x02)
#define EXTI_PinSource3 ((uint8_t)0x03)
#define EXTI_PinSource4 ((uint8_t)0x04)
#define EXTI_PinSource5 ((uint8_t)0x05)
#define EXTI_PinSource6 ((uint8_t)0x06)
#define EXTI_PinSource7 ((uint8_t)0x07)
#define EXTI_PinSource8 ((uint8_t)0x08)
#define EXTI_PinSource9 ((uint8_t)0x09)
#define EXTI_PinSource10 ((uint8_t)0x0A)
#define EXTI_PinSource11 ((uint8_t)0x0B)
#define EXTI_PinSource12 ((uint8_t)0x0C)
#define EXTI_PinSource13 ((uint8_t)0x0D)
#define EXTI_PinSource14 ((uint8_t)0x0E)
#define EXTI_PinSource15 ((uint8_t)0x0F)
#define IS_EXTI_PIN_SOURCE(PINSOURCE) (((PINSOURCE) == EXTI_PinSource0) || \
((PINSOURCE) == EXTI_PinSource1) || \
((PINSOURCE) == EXTI_PinSource2) || \
((PINSOURCE) == EXTI_PinSource3) || \
((PINSOURCE) == EXTI_PinSource4) || \
((PINSOURCE) == EXTI_PinSource5) || \
((PINSOURCE) == EXTI_PinSource6) || \
((PINSOURCE) == EXTI_PinSource7) || \
((PINSOURCE) == EXTI_PinSource8) || \
((PINSOURCE) == EXTI_PinSource9) || \
((PINSOURCE) == EXTI_PinSource10) || \
((PINSOURCE) == EXTI_PinSource11) || \
((PINSOURCE) == EXTI_PinSource12) || \
((PINSOURCE) == EXTI_PinSource13) || \
((PINSOURCE) == EXTI_PinSource14) || \
((PINSOURCE) == EXTI_PinSource15))
/**
* @}
*/
/** @defgroup SYSCFG_Memory_Remap_Config
* @{
*/
#define SYSCFG_MemoryRemap_Flash ((uint8_t)0x00)
#define SYSCFG_MemoryRemap_SystemFlash ((uint8_t)0x01)
#define SYSCFG_MemoryRemap_FSMC ((uint8_t)0x02)
#define SYSCFG_MemoryRemap_SRAM ((uint8_t)0x03)
#define IS_SYSCFG_MEMORY_REMAP_CONFING(REMAP) (((REMAP) == SYSCFG_MemoryRemap_Flash) || \
((REMAP) == SYSCFG_MemoryRemap_SystemFlash) || \
((REMAP) == SYSCFG_MemoryRemap_SRAM) || \
((REMAP) == SYSCFG_MemoryRemap_FSMC))
/**
* @}
*/
/** @defgroup SYSCFG_ETHERNET_Media_Interface
* @{
*/
#define SYSCFG_ETH_MediaInterface_MII ((uint32_t)0x00000000)
#define SYSCFG_ETH_MediaInterface_RMII ((uint32_t)0x00000001)
#define IS_SYSCFG_ETH_MEDIA_INTERFACE(INTERFACE) (((INTERFACE) == SYSCFG_ETH_MediaInterface_MII) || \
((INTERFACE) == SYSCFG_ETH_MediaInterface_RMII))
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
void SYSCFG_DeInit(void);
void SYSCFG_MemoryRemapConfig(uint8_t SYSCFG_MemoryRemap);
void SYSCFG_EXTILineConfig(uint8_t EXTI_PortSourceGPIOx, uint8_t EXTI_PinSourcex);
void SYSCFG_ETH_MediaInterfaceConfig(uint32_t SYSCFG_ETH_MediaInterface);
void SYSCFG_CompensationCellCmd(FunctionalState NewState);
FlagStatus SYSCFG_GetCompensationCellStatus(void);
#ifdef __cplusplus
}
#endif
#endif /*__STM32F2xx_SYSCFG_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
/**
******************************************************************************
* @file stm32f2xx_syscfg.h
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file contains all the functions prototypes for the SYSCFG firmware
* library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F2xx_SYSCFG_H
#define __STM32F2xx_SYSCFG_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f2xx.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @addtogroup SYSCFG
* @{
*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup SYSCFG_Exported_Constants
* @{
*/
/** @defgroup SYSCFG_EXTI_Port_Sources
* @{
*/
#define EXTI_PortSourceGPIOA ((uint8_t)0x00)
#define EXTI_PortSourceGPIOB ((uint8_t)0x01)
#define EXTI_PortSourceGPIOC ((uint8_t)0x02)
#define EXTI_PortSourceGPIOD ((uint8_t)0x03)
#define EXTI_PortSourceGPIOE ((uint8_t)0x04)
#define EXTI_PortSourceGPIOF ((uint8_t)0x05)
#define EXTI_PortSourceGPIOG ((uint8_t)0x06)
#define EXTI_PortSourceGPIOH ((uint8_t)0x07)
#define EXTI_PortSourceGPIOI ((uint8_t)0x08)
#define IS_EXTI_PORT_SOURCE(PORTSOURCE) (((PORTSOURCE) == EXTI_PortSourceGPIOA) || \
((PORTSOURCE) == EXTI_PortSourceGPIOB) || \
((PORTSOURCE) == EXTI_PortSourceGPIOC) || \
((PORTSOURCE) == EXTI_PortSourceGPIOD) || \
((PORTSOURCE) == EXTI_PortSourceGPIOE) || \
((PORTSOURCE) == EXTI_PortSourceGPIOF) || \
((PORTSOURCE) == EXTI_PortSourceGPIOG) || \
((PORTSOURCE) == EXTI_PortSourceGPIOH) || \
((PORTSOURCE) == EXTI_PortSourceGPIOI))
/**
* @}
*/
/** @defgroup SYSCFG_EXTI_Pin_Sources
* @{
*/
#define EXTI_PinSource0 ((uint8_t)0x00)
#define EXTI_PinSource1 ((uint8_t)0x01)
#define EXTI_PinSource2 ((uint8_t)0x02)
#define EXTI_PinSource3 ((uint8_t)0x03)
#define EXTI_PinSource4 ((uint8_t)0x04)
#define EXTI_PinSource5 ((uint8_t)0x05)
#define EXTI_PinSource6 ((uint8_t)0x06)
#define EXTI_PinSource7 ((uint8_t)0x07)
#define EXTI_PinSource8 ((uint8_t)0x08)
#define EXTI_PinSource9 ((uint8_t)0x09)
#define EXTI_PinSource10 ((uint8_t)0x0A)
#define EXTI_PinSource11 ((uint8_t)0x0B)
#define EXTI_PinSource12 ((uint8_t)0x0C)
#define EXTI_PinSource13 ((uint8_t)0x0D)
#define EXTI_PinSource14 ((uint8_t)0x0E)
#define EXTI_PinSource15 ((uint8_t)0x0F)
#define IS_EXTI_PIN_SOURCE(PINSOURCE) (((PINSOURCE) == EXTI_PinSource0) || \
((PINSOURCE) == EXTI_PinSource1) || \
((PINSOURCE) == EXTI_PinSource2) || \
((PINSOURCE) == EXTI_PinSource3) || \
((PINSOURCE) == EXTI_PinSource4) || \
((PINSOURCE) == EXTI_PinSource5) || \
((PINSOURCE) == EXTI_PinSource6) || \
((PINSOURCE) == EXTI_PinSource7) || \
((PINSOURCE) == EXTI_PinSource8) || \
((PINSOURCE) == EXTI_PinSource9) || \
((PINSOURCE) == EXTI_PinSource10) || \
((PINSOURCE) == EXTI_PinSource11) || \
((PINSOURCE) == EXTI_PinSource12) || \
((PINSOURCE) == EXTI_PinSource13) || \
((PINSOURCE) == EXTI_PinSource14) || \
((PINSOURCE) == EXTI_PinSource15))
/**
* @}
*/
/** @defgroup SYSCFG_Memory_Remap_Config
* @{
*/
#define SYSCFG_MemoryRemap_Flash ((uint8_t)0x00)
#define SYSCFG_MemoryRemap_SystemFlash ((uint8_t)0x01)
#define SYSCFG_MemoryRemap_FSMC ((uint8_t)0x02)
#define SYSCFG_MemoryRemap_SRAM ((uint8_t)0x03)
#define IS_SYSCFG_MEMORY_REMAP_CONFING(REMAP) (((REMAP) == SYSCFG_MemoryRemap_Flash) || \
((REMAP) == SYSCFG_MemoryRemap_SystemFlash) || \
((REMAP) == SYSCFG_MemoryRemap_SRAM) || \
((REMAP) == SYSCFG_MemoryRemap_FSMC))
/**
* @}
*/
/** @defgroup SYSCFG_ETHERNET_Media_Interface
* @{
*/
#define SYSCFG_ETH_MediaInterface_MII ((uint32_t)0x00000000)
#define SYSCFG_ETH_MediaInterface_RMII ((uint32_t)0x00000001)
#define IS_SYSCFG_ETH_MEDIA_INTERFACE(INTERFACE) (((INTERFACE) == SYSCFG_ETH_MediaInterface_MII) || \
((INTERFACE) == SYSCFG_ETH_MediaInterface_RMII))
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
void SYSCFG_DeInit(void);
void SYSCFG_MemoryRemapConfig(uint8_t SYSCFG_MemoryRemap);
void SYSCFG_EXTILineConfig(uint8_t EXTI_PortSourceGPIOx, uint8_t EXTI_PinSourcex);
void SYSCFG_ETH_MediaInterfaceConfig(uint32_t SYSCFG_ETH_MediaInterface);
void SYSCFG_CompensationCellCmd(FunctionalState NewState);
FlagStatus SYSCFG_GetCompensationCellStatus(void);
#ifdef __cplusplus
}
#endif
#endif /*__STM32F2xx_SYSCFG_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
@@ -1,429 +1,429 @@
/**
******************************************************************************
* @file stm32f2xx_usart.h
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file contains all the functions prototypes for the USART
* firmware library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F2xx_USART_H
#define __STM32F2xx_USART_H
#if defined(__cplusplus) && !defined(SIMU)
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "../../CMSIS/Device/ST/STM32F2xx/Include/stm32f2xx.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @addtogroup USART
* @{
*/
/* Exported types ------------------------------------------------------------*/
/**
* @brief USART Init Structure definition
*/
typedef struct
{
uint32_t USART_BaudRate; /*!< This member configures the USART communication baud rate.
The baud rate is computed using the following formula:
- IntegerDivider = ((PCLKx) / (8 * (OVR8+1) * (USART_InitStruct->USART_BaudRate)))
- FractionalDivider = ((IntegerDivider - ((u32) IntegerDivider)) * 8 * (OVR8+1)) + 0.5
Where OVR8 is the "oversampling by 8 mode" configuration bit in the CR1 register. */
uint16_t USART_WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
This parameter can be a value of @ref USART_Word_Length */
uint16_t USART_StopBits; /*!< Specifies the number of stop bits transmitted.
This parameter can be a value of @ref USART_Stop_Bits */
uint16_t USART_Parity; /*!< Specifies the parity mode.
This parameter can be a value of @ref USART_Parity
@note When parity is enabled, the computed parity is inserted
at the MSB position of the transmitted data (9th bit when
the word length is set to 9 data bits; 8th bit when the
word length is set to 8 data bits). */
uint16_t USART_Mode; /*!< Specifies wether the Receive or Transmit mode is enabled or disabled.
This parameter can be a value of @ref USART_Mode */
uint16_t USART_HardwareFlowControl; /*!< Specifies wether the hardware flow control mode is enabled
or disabled.
This parameter can be a value of @ref USART_Hardware_Flow_Control */
} USART_InitTypeDef;
/**
* @brief USART Clock Init Structure definition
*/
typedef struct
{
uint16_t USART_Clock; /*!< Specifies whether the USART clock is enabled or disabled.
This parameter can be a value of @ref USART_Clock */
uint16_t USART_CPOL; /*!< Specifies the steady state of the serial clock.
This parameter can be a value of @ref USART_Clock_Polarity */
uint16_t USART_CPHA; /*!< Specifies the clock transition on which the bit capture is made.
This parameter can be a value of @ref USART_Clock_Phase */
uint16_t USART_LastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted
data bit (MSB) has to be output on the SCLK pin in synchronous mode.
This parameter can be a value of @ref USART_Last_Bit */
} USART_ClockInitTypeDef;
/* Exported constants --------------------------------------------------------*/
/** @defgroup USART_Exported_Constants
* @{
*/
#define IS_USART_ALL_PERIPH(PERIPH) (((PERIPH) == USART1) || \
((PERIPH) == USART2) || \
((PERIPH) == USART3) || \
((PERIPH) == UART4) || \
((PERIPH) == UART5) || \
((PERIPH) == USART6))
#define IS_USART_1236_PERIPH(PERIPH) (((PERIPH) == USART1) || \
((PERIPH) == USART2) || \
((PERIPH) == USART3) || \
((PERIPH) == USART6))
/** @defgroup USART_Word_Length
* @{
*/
#define USART_WordLength_8b ((uint16_t)0x0000)
#define USART_WordLength_9b ((uint16_t)0x1000)
#define IS_USART_WORD_LENGTH(LENGTH) (((LENGTH) == USART_WordLength_8b) || \
((LENGTH) == USART_WordLength_9b))
/**
* @}
*/
/** @defgroup USART_Stop_Bits
* @{
*/
#define USART_StopBits_1 ((uint16_t)0x0000)
#define USART_StopBits_0_5 ((uint16_t)0x1000)
#define USART_StopBits_2 ((uint16_t)0x2000)
#define USART_StopBits_1_5 ((uint16_t)0x3000)
#define IS_USART_STOPBITS(STOPBITS) (((STOPBITS) == USART_StopBits_1) || \
((STOPBITS) == USART_StopBits_0_5) || \
((STOPBITS) == USART_StopBits_2) || \
((STOPBITS) == USART_StopBits_1_5))
/**
* @}
*/
/** @defgroup USART_Parity
* @{
*/
#define USART_Parity_No ((uint16_t)0x0000)
#define USART_Parity_Even ((uint16_t)0x0400)
#define USART_Parity_Odd ((uint16_t)0x0600)
#define IS_USART_PARITY(PARITY) (((PARITY) == USART_Parity_No) || \
((PARITY) == USART_Parity_Even) || \
((PARITY) == USART_Parity_Odd))
/**
* @}
*/
/** @defgroup USART_Mode
* @{
*/
#define USART_Mode_Rx ((uint16_t)0x0004)
#define USART_Mode_Tx ((uint16_t)0x0008)
#define IS_USART_MODE(MODE) ((((MODE) & (uint16_t)0xFFF3) == 0x00) && ((MODE) != (uint16_t)0x00))
/**
* @}
*/
/** @defgroup USART_Hardware_Flow_Control
* @{
*/
#define USART_HardwareFlowControl_None ((uint16_t)0x0000)
#define USART_HardwareFlowControl_RTS ((uint16_t)0x0100)
#define USART_HardwareFlowControl_CTS ((uint16_t)0x0200)
#define USART_HardwareFlowControl_RTS_CTS ((uint16_t)0x0300)
#define IS_USART_HARDWARE_FLOW_CONTROL(CONTROL)\
(((CONTROL) == USART_HardwareFlowControl_None) || \
((CONTROL) == USART_HardwareFlowControl_RTS) || \
((CONTROL) == USART_HardwareFlowControl_CTS) || \
((CONTROL) == USART_HardwareFlowControl_RTS_CTS))
/**
* @}
*/
/** @defgroup USART_Clock
* @{
*/
#define USART_Clock_Disable ((uint16_t)0x0000)
#define USART_Clock_Enable ((uint16_t)0x0800)
#define IS_USART_CLOCK(CLOCK) (((CLOCK) == USART_Clock_Disable) || \
((CLOCK) == USART_Clock_Enable))
/**
* @}
*/
/** @defgroup USART_Clock_Polarity
* @{
*/
#define USART_CPOL_Low ((uint16_t)0x0000)
#define USART_CPOL_High ((uint16_t)0x0400)
#define IS_USART_CPOL(CPOL) (((CPOL) == USART_CPOL_Low) || ((CPOL) == USART_CPOL_High))
/**
* @}
*/
/** @defgroup USART_Clock_Phase
* @{
*/
#define USART_CPHA_1Edge ((uint16_t)0x0000)
#define USART_CPHA_2Edge ((uint16_t)0x0200)
#define IS_USART_CPHA(CPHA) (((CPHA) == USART_CPHA_1Edge) || ((CPHA) == USART_CPHA_2Edge))
/**
* @}
*/
/** @defgroup USART_Last_Bit
* @{
*/
#define USART_LastBit_Disable ((uint16_t)0x0000)
#define USART_LastBit_Enable ((uint16_t)0x0100)
#define IS_USART_LASTBIT(LASTBIT) (((LASTBIT) == USART_LastBit_Disable) || \
((LASTBIT) == USART_LastBit_Enable))
/**
* @}
*/
/** @defgroup USART_Interrupt_definition
* @{
*/
#define USART_IT_PE ((uint16_t)0x0028)
#define USART_IT_TXE ((uint16_t)0x0727)
#define USART_IT_TC ((uint16_t)0x0626)
#define USART_IT_RXNE ((uint16_t)0x0525)
#define USART_IT_ORE_RX ((uint16_t)0x0325) /* In case interrupt is generated if the RXNEIE bit is set */
#define USART_IT_IDLE ((uint16_t)0x0424)
#define USART_IT_LBD ((uint16_t)0x0846)
#define USART_IT_CTS ((uint16_t)0x096A)
#define USART_IT_ERR ((uint16_t)0x0060)
#define USART_IT_ORE_ER ((uint16_t)0x0360) /* In case interrupt is generated if the EIE bit is set */
#define USART_IT_NE ((uint16_t)0x0260)
#define USART_IT_FE ((uint16_t)0x0160)
/** @defgroup USART_Legacy
* @{
*/
#define USART_IT_ORE USART_IT_ORE_ER
/**
* @}
*/
#define IS_USART_CONFIG_IT(IT) (((IT) == USART_IT_PE) || ((IT) == USART_IT_TXE) || \
((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \
((IT) == USART_IT_IDLE) || ((IT) == USART_IT_LBD) || \
((IT) == USART_IT_CTS) || ((IT) == USART_IT_ERR))
#define IS_USART_GET_IT(IT) (((IT) == USART_IT_PE) || ((IT) == USART_IT_TXE) || \
((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \
((IT) == USART_IT_IDLE) || ((IT) == USART_IT_LBD) || \
((IT) == USART_IT_CTS) || ((IT) == USART_IT_ORE) || \
((IT) == USART_IT_ORE_RX) || ((IT) == USART_IT_ORE_ER) || \
((IT) == USART_IT_NE) || ((IT) == USART_IT_FE))
#define IS_USART_CLEAR_IT(IT) (((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \
((IT) == USART_IT_LBD) || ((IT) == USART_IT_CTS))
/**
* @}
*/
/** @defgroup USART_DMA_Requests
* @{
*/
#define USART_DMAReq_Tx ((uint16_t)0x0080)
#define USART_DMAReq_Rx ((uint16_t)0x0040)
#define IS_USART_DMAREQ(DMAREQ) ((((DMAREQ) & (uint16_t)0xFF3F) == 0x00) && ((DMAREQ) != (uint16_t)0x00))
/**
* @}
*/
/** @defgroup USART_WakeUp_methods
* @{
*/
#define USART_WakeUp_IdleLine ((uint16_t)0x0000)
#define USART_WakeUp_AddressMark ((uint16_t)0x0800)
#define IS_USART_WAKEUP(WAKEUP) (((WAKEUP) == USART_WakeUp_IdleLine) || \
((WAKEUP) == USART_WakeUp_AddressMark))
/**
* @}
*/
/** @defgroup USART_LIN_Break_Detection_Length
* @{
*/
#define USART_LINBreakDetectLength_10b ((uint16_t)0x0000)
#define USART_LINBreakDetectLength_11b ((uint16_t)0x0020)
#define IS_USART_LIN_BREAK_DETECT_LENGTH(LENGTH) \
(((LENGTH) == USART_LINBreakDetectLength_10b) || \
((LENGTH) == USART_LINBreakDetectLength_11b))
/**
* @}
*/
/** @defgroup USART_IrDA_Low_Power
* @{
*/
#define USART_IrDAMode_LowPower ((uint16_t)0x0004)
#define USART_IrDAMode_Normal ((uint16_t)0x0000)
#define IS_USART_IRDA_MODE(MODE) (((MODE) == USART_IrDAMode_LowPower) || \
((MODE) == USART_IrDAMode_Normal))
/**
* @}
*/
/** @defgroup USART_Flags
* @{
*/
#define USART_FLAG_CTS ((uint16_t)0x0200)
#define USART_FLAG_LBD ((uint16_t)0x0100)
#define USART_FLAG_TXE ((uint16_t)0x0080)
#define USART_FLAG_TC ((uint16_t)0x0040)
#define USART_FLAG_RXNE ((uint16_t)0x0020)
#define USART_FLAG_IDLE ((uint16_t)0x0010)
#define USART_FLAG_ORE ((uint16_t)0x0008)
#define USART_FLAG_NE ((uint16_t)0x0004)
#define USART_FLAG_FE ((uint16_t)0x0002)
#define USART_FLAG_PE ((uint16_t)0x0001)
#define IS_USART_FLAG(FLAG) (((FLAG) == USART_FLAG_PE) || ((FLAG) == USART_FLAG_TXE) || \
((FLAG) == USART_FLAG_TC) || ((FLAG) == USART_FLAG_RXNE) || \
((FLAG) == USART_FLAG_IDLE) || ((FLAG) == USART_FLAG_LBD) || \
((FLAG) == USART_FLAG_CTS) || ((FLAG) == USART_FLAG_ORE) || \
((FLAG) == USART_FLAG_NE) || ((FLAG) == USART_FLAG_FE))
#define IS_USART_CLEAR_FLAG(FLAG) ((((FLAG) & (uint16_t)0xFC9F) == 0x00) && ((FLAG) != (uint16_t)0x00))
#define IS_USART_BAUDRATE(BAUDRATE) (((BAUDRATE) > 0) && ((BAUDRATE) < 7500001))
#define IS_USART_ADDRESS(ADDRESS) ((ADDRESS) <= 0xF)
#define IS_USART_DATA(DATA) ((DATA) <= 0x1FF)
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/* Function used to set the USART configuration to the default reset state ***/
void USART_DeInit(USART_TypeDef* USARTx);
/* Initialization and Configuration functions *********************************/
void USART_Init(USART_TypeDef* USARTx, USART_InitTypeDef* USART_InitStruct);
void USART_StructInit(USART_InitTypeDef* USART_InitStruct);
void USART_ClockInit(USART_TypeDef* USARTx, USART_ClockInitTypeDef* USART_ClockInitStruct);
void USART_ClockStructInit(USART_ClockInitTypeDef* USART_ClockInitStruct);
void USART_Cmd(USART_TypeDef* USARTx, FunctionalState NewState);
void USART_SetPrescaler(USART_TypeDef* USARTx, uint8_t USART_Prescaler);
void USART_OverSampling8Cmd(USART_TypeDef* USARTx, FunctionalState NewState);
void USART_OneBitMethodCmd(USART_TypeDef* USARTx, FunctionalState NewState);
/* Data transfers functions ***************************************************/
void USART_SendData(USART_TypeDef* USARTx, uint16_t Data);
uint16_t USART_ReceiveData(USART_TypeDef* USARTx);
/* Multi-Processor Communication functions ************************************/
void USART_SetAddress(USART_TypeDef* USARTx, uint8_t USART_Address);
void USART_WakeUpConfig(USART_TypeDef* USARTx, uint16_t USART_WakeUp);
void USART_ReceiverWakeUpCmd(USART_TypeDef* USARTx, FunctionalState NewState);
/* LIN mode functions *********************************************************/
void USART_LINBreakDetectLengthConfig(USART_TypeDef* USARTx, uint16_t USART_LINBreakDetectLength);
void USART_LINCmd(USART_TypeDef* USARTx, FunctionalState NewState);
void USART_SendBreak(USART_TypeDef* USARTx);
/* Half-duplex mode function **************************************************/
void USART_HalfDuplexCmd(USART_TypeDef* USARTx, FunctionalState NewState);
/* Smartcard mode functions ***************************************************/
void USART_SmartCardCmd(USART_TypeDef* USARTx, FunctionalState NewState);
void USART_SmartCardNACKCmd(USART_TypeDef* USARTx, FunctionalState NewState);
void USART_SetGuardTime(USART_TypeDef* USARTx, uint8_t USART_GuardTime);
/* IrDA mode functions ********************************************************/
void USART_IrDAConfig(USART_TypeDef* USARTx, uint16_t USART_IrDAMode);
void USART_IrDACmd(USART_TypeDef* USARTx, FunctionalState NewState);
/* DMA transfers management functions *****************************************/
void USART_DMACmd(USART_TypeDef* USARTx, uint16_t USART_DMAReq, FunctionalState NewState);
/* Interrupts and flags management functions **********************************/
void USART_ITConfig(USART_TypeDef* USARTx, uint16_t USART_IT, FunctionalState NewState);
FlagStatus USART_GetFlagStatus(USART_TypeDef* USARTx, uint16_t USART_FLAG);
void USART_ClearFlag(USART_TypeDef* USARTx, uint16_t USART_FLAG);
ITStatus USART_GetITStatus(USART_TypeDef* USARTx, uint16_t USART_IT);
void USART_ClearITPendingBit(USART_TypeDef* USARTx, uint16_t USART_IT);
#if defined(__cplusplus) && !defined(SIMU)
}
#endif
#endif /* __STM32F2xx_USART_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
/**
******************************************************************************
* @file stm32f2xx_usart.h
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file contains all the functions prototypes for the USART
* firmware library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F2xx_USART_H
#define __STM32F2xx_USART_H
#if defined(__cplusplus) && !defined(SIMU)
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "../../CMSIS/Device/ST/STM32F2xx/Include/stm32f2xx.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @addtogroup USART
* @{
*/
/* Exported types ------------------------------------------------------------*/
/**
* @brief USART Init Structure definition
*/
typedef struct
{
uint32_t USART_BaudRate; /*!< This member configures the USART communication baud rate.
The baud rate is computed using the following formula:
- IntegerDivider = ((PCLKx) / (8 * (OVR8+1) * (USART_InitStruct->USART_BaudRate)))
- FractionalDivider = ((IntegerDivider - ((u32) IntegerDivider)) * 8 * (OVR8+1)) + 0.5
Where OVR8 is the "oversampling by 8 mode" configuration bit in the CR1 register. */
uint16_t USART_WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
This parameter can be a value of @ref USART_Word_Length */
uint16_t USART_StopBits; /*!< Specifies the number of stop bits transmitted.
This parameter can be a value of @ref USART_Stop_Bits */
uint16_t USART_Parity; /*!< Specifies the parity mode.
This parameter can be a value of @ref USART_Parity
@note When parity is enabled, the computed parity is inserted
at the MSB position of the transmitted data (9th bit when
the word length is set to 9 data bits; 8th bit when the
word length is set to 8 data bits). */
uint16_t USART_Mode; /*!< Specifies wether the Receive or Transmit mode is enabled or disabled.
This parameter can be a value of @ref USART_Mode */
uint16_t USART_HardwareFlowControl; /*!< Specifies wether the hardware flow control mode is enabled
or disabled.
This parameter can be a value of @ref USART_Hardware_Flow_Control */
} USART_InitTypeDef;
/**
* @brief USART Clock Init Structure definition
*/
typedef struct
{
uint16_t USART_Clock; /*!< Specifies whether the USART clock is enabled or disabled.
This parameter can be a value of @ref USART_Clock */
uint16_t USART_CPOL; /*!< Specifies the steady state of the serial clock.
This parameter can be a value of @ref USART_Clock_Polarity */
uint16_t USART_CPHA; /*!< Specifies the clock transition on which the bit capture is made.
This parameter can be a value of @ref USART_Clock_Phase */
uint16_t USART_LastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted
data bit (MSB) has to be output on the SCLK pin in synchronous mode.
This parameter can be a value of @ref USART_Last_Bit */
} USART_ClockInitTypeDef;
/* Exported constants --------------------------------------------------------*/
/** @defgroup USART_Exported_Constants
* @{
*/
#define IS_USART_ALL_PERIPH(PERIPH) (((PERIPH) == USART1) || \
((PERIPH) == USART2) || \
((PERIPH) == USART3) || \
((PERIPH) == UART4) || \
((PERIPH) == UART5) || \
((PERIPH) == USART6))
#define IS_USART_1236_PERIPH(PERIPH) (((PERIPH) == USART1) || \
((PERIPH) == USART2) || \
((PERIPH) == USART3) || \
((PERIPH) == USART6))
/** @defgroup USART_Word_Length
* @{
*/
#define USART_WordLength_8b ((uint16_t)0x0000)
#define USART_WordLength_9b ((uint16_t)0x1000)
#define IS_USART_WORD_LENGTH(LENGTH) (((LENGTH) == USART_WordLength_8b) || \
((LENGTH) == USART_WordLength_9b))
/**
* @}
*/
/** @defgroup USART_Stop_Bits
* @{
*/
#define USART_StopBits_1 ((uint16_t)0x0000)
#define USART_StopBits_0_5 ((uint16_t)0x1000)
#define USART_StopBits_2 ((uint16_t)0x2000)
#define USART_StopBits_1_5 ((uint16_t)0x3000)
#define IS_USART_STOPBITS(STOPBITS) (((STOPBITS) == USART_StopBits_1) || \
((STOPBITS) == USART_StopBits_0_5) || \
((STOPBITS) == USART_StopBits_2) || \
((STOPBITS) == USART_StopBits_1_5))
/**
* @}
*/
/** @defgroup USART_Parity
* @{
*/
#define USART_Parity_No ((uint16_t)0x0000)
#define USART_Parity_Even ((uint16_t)0x0400)
#define USART_Parity_Odd ((uint16_t)0x0600)
#define IS_USART_PARITY(PARITY) (((PARITY) == USART_Parity_No) || \
((PARITY) == USART_Parity_Even) || \
((PARITY) == USART_Parity_Odd))
/**
* @}
*/
/** @defgroup USART_Mode
* @{
*/
#define USART_Mode_Rx ((uint16_t)0x0004)
#define USART_Mode_Tx ((uint16_t)0x0008)
#define IS_USART_MODE(MODE) ((((MODE) & (uint16_t)0xFFF3) == 0x00) && ((MODE) != (uint16_t)0x00))
/**
* @}
*/
/** @defgroup USART_Hardware_Flow_Control
* @{
*/
#define USART_HardwareFlowControl_None ((uint16_t)0x0000)
#define USART_HardwareFlowControl_RTS ((uint16_t)0x0100)
#define USART_HardwareFlowControl_CTS ((uint16_t)0x0200)
#define USART_HardwareFlowControl_RTS_CTS ((uint16_t)0x0300)
#define IS_USART_HARDWARE_FLOW_CONTROL(CONTROL)\
(((CONTROL) == USART_HardwareFlowControl_None) || \
((CONTROL) == USART_HardwareFlowControl_RTS) || \
((CONTROL) == USART_HardwareFlowControl_CTS) || \
((CONTROL) == USART_HardwareFlowControl_RTS_CTS))
/**
* @}
*/
/** @defgroup USART_Clock
* @{
*/
#define USART_Clock_Disable ((uint16_t)0x0000)
#define USART_Clock_Enable ((uint16_t)0x0800)
#define IS_USART_CLOCK(CLOCK) (((CLOCK) == USART_Clock_Disable) || \
((CLOCK) == USART_Clock_Enable))
/**
* @}
*/
/** @defgroup USART_Clock_Polarity
* @{
*/
#define USART_CPOL_Low ((uint16_t)0x0000)
#define USART_CPOL_High ((uint16_t)0x0400)
#define IS_USART_CPOL(CPOL) (((CPOL) == USART_CPOL_Low) || ((CPOL) == USART_CPOL_High))
/**
* @}
*/
/** @defgroup USART_Clock_Phase
* @{
*/
#define USART_CPHA_1Edge ((uint16_t)0x0000)
#define USART_CPHA_2Edge ((uint16_t)0x0200)
#define IS_USART_CPHA(CPHA) (((CPHA) == USART_CPHA_1Edge) || ((CPHA) == USART_CPHA_2Edge))
/**
* @}
*/
/** @defgroup USART_Last_Bit
* @{
*/
#define USART_LastBit_Disable ((uint16_t)0x0000)
#define USART_LastBit_Enable ((uint16_t)0x0100)
#define IS_USART_LASTBIT(LASTBIT) (((LASTBIT) == USART_LastBit_Disable) || \
((LASTBIT) == USART_LastBit_Enable))
/**
* @}
*/
/** @defgroup USART_Interrupt_definition
* @{
*/
#define USART_IT_PE ((uint16_t)0x0028)
#define USART_IT_TXE ((uint16_t)0x0727)
#define USART_IT_TC ((uint16_t)0x0626)
#define USART_IT_RXNE ((uint16_t)0x0525)
#define USART_IT_ORE_RX ((uint16_t)0x0325) /* In case interrupt is generated if the RXNEIE bit is set */
#define USART_IT_IDLE ((uint16_t)0x0424)
#define USART_IT_LBD ((uint16_t)0x0846)
#define USART_IT_CTS ((uint16_t)0x096A)
#define USART_IT_ERR ((uint16_t)0x0060)
#define USART_IT_ORE_ER ((uint16_t)0x0360) /* In case interrupt is generated if the EIE bit is set */
#define USART_IT_NE ((uint16_t)0x0260)
#define USART_IT_FE ((uint16_t)0x0160)
/** @defgroup USART_Legacy
* @{
*/
#define USART_IT_ORE USART_IT_ORE_ER
/**
* @}
*/
#define IS_USART_CONFIG_IT(IT) (((IT) == USART_IT_PE) || ((IT) == USART_IT_TXE) || \
((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \
((IT) == USART_IT_IDLE) || ((IT) == USART_IT_LBD) || \
((IT) == USART_IT_CTS) || ((IT) == USART_IT_ERR))
#define IS_USART_GET_IT(IT) (((IT) == USART_IT_PE) || ((IT) == USART_IT_TXE) || \
((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \
((IT) == USART_IT_IDLE) || ((IT) == USART_IT_LBD) || \
((IT) == USART_IT_CTS) || ((IT) == USART_IT_ORE) || \
((IT) == USART_IT_ORE_RX) || ((IT) == USART_IT_ORE_ER) || \
((IT) == USART_IT_NE) || ((IT) == USART_IT_FE))
#define IS_USART_CLEAR_IT(IT) (((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \
((IT) == USART_IT_LBD) || ((IT) == USART_IT_CTS))
/**
* @}
*/
/** @defgroup USART_DMA_Requests
* @{
*/
#define USART_DMAReq_Tx ((uint16_t)0x0080)
#define USART_DMAReq_Rx ((uint16_t)0x0040)
#define IS_USART_DMAREQ(DMAREQ) ((((DMAREQ) & (uint16_t)0xFF3F) == 0x00) && ((DMAREQ) != (uint16_t)0x00))
/**
* @}
*/
/** @defgroup USART_WakeUp_methods
* @{
*/
#define USART_WakeUp_IdleLine ((uint16_t)0x0000)
#define USART_WakeUp_AddressMark ((uint16_t)0x0800)
#define IS_USART_WAKEUP(WAKEUP) (((WAKEUP) == USART_WakeUp_IdleLine) || \
((WAKEUP) == USART_WakeUp_AddressMark))
/**
* @}
*/
/** @defgroup USART_LIN_Break_Detection_Length
* @{
*/
#define USART_LINBreakDetectLength_10b ((uint16_t)0x0000)
#define USART_LINBreakDetectLength_11b ((uint16_t)0x0020)
#define IS_USART_LIN_BREAK_DETECT_LENGTH(LENGTH) \
(((LENGTH) == USART_LINBreakDetectLength_10b) || \
((LENGTH) == USART_LINBreakDetectLength_11b))
/**
* @}
*/
/** @defgroup USART_IrDA_Low_Power
* @{
*/
#define USART_IrDAMode_LowPower ((uint16_t)0x0004)
#define USART_IrDAMode_Normal ((uint16_t)0x0000)
#define IS_USART_IRDA_MODE(MODE) (((MODE) == USART_IrDAMode_LowPower) || \
((MODE) == USART_IrDAMode_Normal))
/**
* @}
*/
/** @defgroup USART_Flags
* @{
*/
#define USART_FLAG_CTS ((uint16_t)0x0200)
#define USART_FLAG_LBD ((uint16_t)0x0100)
#define USART_FLAG_TXE ((uint16_t)0x0080)
#define USART_FLAG_TC ((uint16_t)0x0040)
#define USART_FLAG_RXNE ((uint16_t)0x0020)
#define USART_FLAG_IDLE ((uint16_t)0x0010)
#define USART_FLAG_ORE ((uint16_t)0x0008)
#define USART_FLAG_NE ((uint16_t)0x0004)
#define USART_FLAG_FE ((uint16_t)0x0002)
#define USART_FLAG_PE ((uint16_t)0x0001)
#define IS_USART_FLAG(FLAG) (((FLAG) == USART_FLAG_PE) || ((FLAG) == USART_FLAG_TXE) || \
((FLAG) == USART_FLAG_TC) || ((FLAG) == USART_FLAG_RXNE) || \
((FLAG) == USART_FLAG_IDLE) || ((FLAG) == USART_FLAG_LBD) || \
((FLAG) == USART_FLAG_CTS) || ((FLAG) == USART_FLAG_ORE) || \
((FLAG) == USART_FLAG_NE) || ((FLAG) == USART_FLAG_FE))
#define IS_USART_CLEAR_FLAG(FLAG) ((((FLAG) & (uint16_t)0xFC9F) == 0x00) && ((FLAG) != (uint16_t)0x00))
#define IS_USART_BAUDRATE(BAUDRATE) (((BAUDRATE) > 0) && ((BAUDRATE) < 7500001))
#define IS_USART_ADDRESS(ADDRESS) ((ADDRESS) <= 0xF)
#define IS_USART_DATA(DATA) ((DATA) <= 0x1FF)
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/* Function used to set the USART configuration to the default reset state ***/
void USART_DeInit(USART_TypeDef* USARTx);
/* Initialization and Configuration functions *********************************/
void USART_Init(USART_TypeDef* USARTx, USART_InitTypeDef* USART_InitStruct);
void USART_StructInit(USART_InitTypeDef* USART_InitStruct);
void USART_ClockInit(USART_TypeDef* USARTx, USART_ClockInitTypeDef* USART_ClockInitStruct);
void USART_ClockStructInit(USART_ClockInitTypeDef* USART_ClockInitStruct);
void USART_Cmd(USART_TypeDef* USARTx, FunctionalState NewState);
void USART_SetPrescaler(USART_TypeDef* USARTx, uint8_t USART_Prescaler);
void USART_OverSampling8Cmd(USART_TypeDef* USARTx, FunctionalState NewState);
void USART_OneBitMethodCmd(USART_TypeDef* USARTx, FunctionalState NewState);
/* Data transfers functions ***************************************************/
void USART_SendData(USART_TypeDef* USARTx, uint16_t Data);
uint16_t USART_ReceiveData(USART_TypeDef* USARTx);
/* Multi-Processor Communication functions ************************************/
void USART_SetAddress(USART_TypeDef* USARTx, uint8_t USART_Address);
void USART_WakeUpConfig(USART_TypeDef* USARTx, uint16_t USART_WakeUp);
void USART_ReceiverWakeUpCmd(USART_TypeDef* USARTx, FunctionalState NewState);
/* LIN mode functions *********************************************************/
void USART_LINBreakDetectLengthConfig(USART_TypeDef* USARTx, uint16_t USART_LINBreakDetectLength);
void USART_LINCmd(USART_TypeDef* USARTx, FunctionalState NewState);
void USART_SendBreak(USART_TypeDef* USARTx);
/* Half-duplex mode function **************************************************/
void USART_HalfDuplexCmd(USART_TypeDef* USARTx, FunctionalState NewState);
/* Smartcard mode functions ***************************************************/
void USART_SmartCardCmd(USART_TypeDef* USARTx, FunctionalState NewState);
void USART_SmartCardNACKCmd(USART_TypeDef* USARTx, FunctionalState NewState);
void USART_SetGuardTime(USART_TypeDef* USARTx, uint8_t USART_GuardTime);
/* IrDA mode functions ********************************************************/
void USART_IrDAConfig(USART_TypeDef* USARTx, uint16_t USART_IrDAMode);
void USART_IrDACmd(USART_TypeDef* USARTx, FunctionalState NewState);
/* DMA transfers management functions *****************************************/
void USART_DMACmd(USART_TypeDef* USARTx, uint16_t USART_DMAReq, FunctionalState NewState);
/* Interrupts and flags management functions **********************************/
void USART_ITConfig(USART_TypeDef* USARTx, uint16_t USART_IT, FunctionalState NewState);
FlagStatus USART_GetFlagStatus(USART_TypeDef* USARTx, uint16_t USART_FLAG);
void USART_ClearFlag(USART_TypeDef* USARTx, uint16_t USART_FLAG);
ITStatus USART_GetITStatus(USART_TypeDef* USARTx, uint16_t USART_IT);
void USART_ClearITPendingBit(USART_TypeDef* USARTx, uint16_t USART_IT);
#if defined(__cplusplus) && !defined(SIMU)
}
#endif
#endif /* __STM32F2xx_USART_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
@@ -1,111 +1,111 @@
/**
******************************************************************************
* @file stm32f2xx_wwdg.h
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file contains all the functions prototypes for the WWDG firmware
* library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F2xx_WWDG_H
#define __STM32F2xx_WWDG_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f2xx.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @addtogroup WWDG
* @{
*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup WWDG_Exported_Constants
* @{
*/
/** @defgroup WWDG_Prescaler
* @{
*/
#define WWDG_Prescaler_1 ((uint32_t)0x00000000)
#define WWDG_Prescaler_2 ((uint32_t)0x00000080)
#define WWDG_Prescaler_4 ((uint32_t)0x00000100)
#define WWDG_Prescaler_8 ((uint32_t)0x00000180)
#define IS_WWDG_PRESCALER(PRESCALER) (((PRESCALER) == WWDG_Prescaler_1) || \
((PRESCALER) == WWDG_Prescaler_2) || \
((PRESCALER) == WWDG_Prescaler_4) || \
((PRESCALER) == WWDG_Prescaler_8))
#define IS_WWDG_WINDOW_VALUE(VALUE) ((VALUE) <= 0x7F)
#define IS_WWDG_COUNTER(COUNTER) (((COUNTER) >= 0x40) && ((COUNTER) <= 0x7F))
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/* Function used to set the WWDG configuration to the default reset state ****/
void WWDG_DeInit(void);
/* Prescaler, Refresh window and Counter configuration functions **************/
void WWDG_SetPrescaler(uint32_t WWDG_Prescaler);
void WWDG_SetWindowValue(uint8_t WindowValue);
void WWDG_EnableIT(void);
void WWDG_SetCounter(uint8_t Counter);
/* WWDG activation function ***************************************************/
void WWDG_Enable(uint8_t Counter);
/* Interrupts and flags management functions **********************************/
FlagStatus WWDG_GetFlagStatus(void);
void WWDG_ClearFlag(void);
#ifdef __cplusplus
}
#endif
#endif /* __STM32F2xx_WWDG_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
/**
******************************************************************************
* @file stm32f2xx_wwdg.h
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file contains all the functions prototypes for the WWDG firmware
* library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F2xx_WWDG_H
#define __STM32F2xx_WWDG_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f2xx.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @addtogroup WWDG
* @{
*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup WWDG_Exported_Constants
* @{
*/
/** @defgroup WWDG_Prescaler
* @{
*/
#define WWDG_Prescaler_1 ((uint32_t)0x00000000)
#define WWDG_Prescaler_2 ((uint32_t)0x00000080)
#define WWDG_Prescaler_4 ((uint32_t)0x00000100)
#define WWDG_Prescaler_8 ((uint32_t)0x00000180)
#define IS_WWDG_PRESCALER(PRESCALER) (((PRESCALER) == WWDG_Prescaler_1) || \
((PRESCALER) == WWDG_Prescaler_2) || \
((PRESCALER) == WWDG_Prescaler_4) || \
((PRESCALER) == WWDG_Prescaler_8))
#define IS_WWDG_WINDOW_VALUE(VALUE) ((VALUE) <= 0x7F)
#define IS_WWDG_COUNTER(COUNTER) (((COUNTER) >= 0x40) && ((COUNTER) <= 0x7F))
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/* Function used to set the WWDG configuration to the default reset state ****/
void WWDG_DeInit(void);
/* Prescaler, Refresh window and Counter configuration functions **************/
void WWDG_SetPrescaler(uint32_t WWDG_Prescaler);
void WWDG_SetWindowValue(uint8_t WindowValue);
void WWDG_EnableIT(void);
void WWDG_SetCounter(uint8_t Counter);
/* WWDG activation function ***************************************************/
void WWDG_Enable(uint8_t Counter);
/* Interrupts and flags management functions **********************************/
FlagStatus WWDG_GetFlagStatus(void);
void WWDG_ClearFlag(void);
#ifdef __cplusplus
}
#endif
#endif /* __STM32F2xx_WWDG_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
@@ -1,249 +1,249 @@
/**
******************************************************************************
* @file misc.c
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file provides all the miscellaneous firmware functions (add-on
* to CMSIS functions).
*
* @verbatim
*
* ===================================================================
* How to configure Interrupts using driver
* ===================================================================
*
* This section provide functions allowing to configure the NVIC interrupts (IRQ).
* The Cortex-M3 exceptions are managed by CMSIS functions.
*
* 1. Configure the NVIC Priority Grouping using NVIC_PriorityGroupConfig()
* function according to the following table.
* The table below gives the allowed values of the pre-emption priority and subpriority according
* to the Priority Grouping configuration performed by NVIC_PriorityGroupConfig function
* ==========================================================================================================================
* NVIC_PriorityGroup | NVIC_IRQChannelPreemptionPriority | NVIC_IRQChannelSubPriority | Description
* ==========================================================================================================================
* NVIC_PriorityGroup_0 | 0 | 0-15 | 0 bits for pre-emption priority
* | | | 4 bits for subpriority
* --------------------------------------------------------------------------------------------------------------------------
* NVIC_PriorityGroup_1 | 0-1 | 0-7 | 1 bits for pre-emption priority
* | | | 3 bits for subpriority
* --------------------------------------------------------------------------------------------------------------------------
* NVIC_PriorityGroup_2 | 0-3 | 0-3 | 2 bits for pre-emption priority
* | | | 2 bits for subpriority
* --------------------------------------------------------------------------------------------------------------------------
* NVIC_PriorityGroup_3 | 0-7 | 0-1 | 3 bits for pre-emption priority
* | | | 1 bits for subpriority
* --------------------------------------------------------------------------------------------------------------------------
* NVIC_PriorityGroup_4 | 0-15 | 0 | 4 bits for pre-emption priority
* | | | 0 bits for subpriority
* ==========================================================================================================================
*
* 2. Enable and Configure the priority of the selected IRQ Channels using NVIC_Init()
*
* @note When the NVIC_PriorityGroup_0 is selected, IRQ pre-emption is no more possible.
* The pending IRQ priority will be managed only by the subpriority.
*
* @note IRQ priority order (sorted by highest to lowest priority):
* - Lowest pre-emption priority
* - Lowest subpriority
* - Lowest hardware priority (IRQ number)
*
* @endverbatim
*
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "misc.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @defgroup MISC
* @brief MISC driver modules
* @{
*/
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
#define AIRCR_VECTKEY_MASK ((uint32_t)0x05FA0000)
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup MISC_Private_Functions
* @{
*/
/**
* @brief Configures the priority grouping: pre-emption priority and subpriority.
* @param NVIC_PriorityGroup: specifies the priority grouping bits length.
* This parameter can be one of the following values:
* @arg NVIC_PriorityGroup_0: 0 bits for pre-emption priority
* 4 bits for subpriority
* @arg NVIC_PriorityGroup_1: 1 bits for pre-emption priority
* 3 bits for subpriority
* @arg NVIC_PriorityGroup_2: 2 bits for pre-emption priority
* 2 bits for subpriority
* @arg NVIC_PriorityGroup_3: 3 bits for pre-emption priority
* 1 bits for subpriority
* @arg NVIC_PriorityGroup_4: 4 bits for pre-emption priority
* 0 bits for subpriority
* @note When the NVIC_PriorityGroup_0 is selected, IRQ pre-emption is no more possible.
* The pending IRQ priority will be managed only by the subpriority.
* @retval None
*/
void NVIC_PriorityGroupConfig(uint32_t NVIC_PriorityGroup)
{
/* Check the parameters */
assert_param(IS_NVIC_PRIORITY_GROUP(NVIC_PriorityGroup));
/* Set the PRIGROUP[10:8] bits according to NVIC_PriorityGroup value */
SCB->AIRCR = AIRCR_VECTKEY_MASK | NVIC_PriorityGroup;
}
/**
* @brief Initializes the NVIC peripheral according to the specified
* parameters in the NVIC_InitStruct.
* @note To configure interrupts priority correctly, the NVIC_PriorityGroupConfig()
* function should be called before.
* @param NVIC_InitStruct: pointer to a NVIC_InitTypeDef structure that contains
* the configuration information for the specified NVIC peripheral.
* @retval None
*/
void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct)
{
uint8_t tmppriority = 0x00, tmppre = 0x00, tmpsub = 0x0F;
/* Check the parameters */
assert_param(IS_FUNCTIONAL_STATE(NVIC_InitStruct->NVIC_IRQChannelCmd));
assert_param(IS_NVIC_PREEMPTION_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority));
assert_param(IS_NVIC_SUB_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelSubPriority));
if (NVIC_InitStruct->NVIC_IRQChannelCmd != DISABLE)
{
/* Compute the Corresponding IRQ Priority --------------------------------*/
tmppriority = (0x700 - ((SCB->AIRCR) & (uint32_t)0x700))>> 0x08;
tmppre = (0x4 - tmppriority);
tmpsub = tmpsub >> tmppriority;
tmppriority = NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority << tmppre;
tmppriority |= (uint8_t)(NVIC_InitStruct->NVIC_IRQChannelSubPriority & tmpsub);
tmppriority = tmppriority << 0x04;
NVIC->IP[NVIC_InitStruct->NVIC_IRQChannel] = tmppriority;
/* Enable the Selected IRQ Channels --------------------------------------*/
NVIC->ISER[NVIC_InitStruct->NVIC_IRQChannel >> 0x05] =
(uint32_t)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (uint8_t)0x1F);
}
else
{
/* Disable the Selected IRQ Channels -------------------------------------*/
NVIC->ICER[NVIC_InitStruct->NVIC_IRQChannel >> 0x05] =
(uint32_t)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (uint8_t)0x1F);
}
}
/**
* @brief Sets the vector table location and Offset.
* @param NVIC_VectTab: specifies if the vector table is in RAM or FLASH memory.
* This parameter can be one of the following values:
* @arg NVIC_VectTab_RAM: Vector Table in internal SRAM.
* @arg NVIC_VectTab_FLASH: Vector Table in internal FLASH.
* @param Offset: Vector Table base offset field. This value must be a multiple of 0x200.
* @retval None
*/
void NVIC_SetVectorTable(uint32_t NVIC_VectTab, uint32_t Offset)
{
/* Check the parameters */
assert_param(IS_NVIC_VECTTAB(NVIC_VectTab));
assert_param(IS_NVIC_OFFSET(Offset));
SCB->VTOR = NVIC_VectTab | (Offset & (uint32_t)0x1FFFFF80);
}
/**
* @brief Selects the condition for the system to enter low power mode.
* @param LowPowerMode: Specifies the new mode for the system to enter low power mode.
* This parameter can be one of the following values:
* @arg NVIC_LP_SEVONPEND: Low Power SEV on Pend.
* @arg NVIC_LP_SLEEPDEEP: Low Power DEEPSLEEP request.
* @arg NVIC_LP_SLEEPONEXIT: Low Power Sleep on Exit.
* @param NewState: new state of LP condition. This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void NVIC_SystemLPConfig(uint8_t LowPowerMode, FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_NVIC_LP(LowPowerMode));
assert_param(IS_FUNCTIONAL_STATE(NewState));
if (NewState != DISABLE)
{
SCB->SCR |= LowPowerMode;
}
else
{
SCB->SCR &= (uint32_t)(~(uint32_t)LowPowerMode);
}
}
/**
* @brief Configures the SysTick clock source.
* @param SysTick_CLKSource: specifies the SysTick clock source.
* This parameter can be one of the following values:
* @arg SysTick_CLKSource_HCLK_Div8: AHB clock divided by 8 selected as SysTick clock source.
* @arg SysTick_CLKSource_HCLK: AHB clock selected as SysTick clock source.
* @retval None
*/
void SysTick_CLKSourceConfig(uint32_t SysTick_CLKSource)
{
/* Check the parameters */
assert_param(IS_SYSTICK_CLK_SOURCE(SysTick_CLKSource));
if (SysTick_CLKSource == SysTick_CLKSource_HCLK)
{
SysTick->CTRL |= SysTick_CLKSource_HCLK;
}
else
{
SysTick->CTRL &= SysTick_CLKSource_HCLK_Div8;
}
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
/**
******************************************************************************
* @file misc.c
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file provides all the miscellaneous firmware functions (add-on
* to CMSIS functions).
*
* @verbatim
*
* ===================================================================
* How to configure Interrupts using driver
* ===================================================================
*
* This section provide functions allowing to configure the NVIC interrupts (IRQ).
* The Cortex-M3 exceptions are managed by CMSIS functions.
*
* 1. Configure the NVIC Priority Grouping using NVIC_PriorityGroupConfig()
* function according to the following table.
* The table below gives the allowed values of the pre-emption priority and subpriority according
* to the Priority Grouping configuration performed by NVIC_PriorityGroupConfig function
* ==========================================================================================================================
* NVIC_PriorityGroup | NVIC_IRQChannelPreemptionPriority | NVIC_IRQChannelSubPriority | Description
* ==========================================================================================================================
* NVIC_PriorityGroup_0 | 0 | 0-15 | 0 bits for pre-emption priority
* | | | 4 bits for subpriority
* --------------------------------------------------------------------------------------------------------------------------
* NVIC_PriorityGroup_1 | 0-1 | 0-7 | 1 bits for pre-emption priority
* | | | 3 bits for subpriority
* --------------------------------------------------------------------------------------------------------------------------
* NVIC_PriorityGroup_2 | 0-3 | 0-3 | 2 bits for pre-emption priority
* | | | 2 bits for subpriority
* --------------------------------------------------------------------------------------------------------------------------
* NVIC_PriorityGroup_3 | 0-7 | 0-1 | 3 bits for pre-emption priority
* | | | 1 bits for subpriority
* --------------------------------------------------------------------------------------------------------------------------
* NVIC_PriorityGroup_4 | 0-15 | 0 | 4 bits for pre-emption priority
* | | | 0 bits for subpriority
* ==========================================================================================================================
*
* 2. Enable and Configure the priority of the selected IRQ Channels using NVIC_Init()
*
* @note When the NVIC_PriorityGroup_0 is selected, IRQ pre-emption is no more possible.
* The pending IRQ priority will be managed only by the subpriority.
*
* @note IRQ priority order (sorted by highest to lowest priority):
* - Lowest pre-emption priority
* - Lowest subpriority
* - Lowest hardware priority (IRQ number)
*
* @endverbatim
*
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "misc.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @defgroup MISC
* @brief MISC driver modules
* @{
*/
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
#define AIRCR_VECTKEY_MASK ((uint32_t)0x05FA0000)
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup MISC_Private_Functions
* @{
*/
/**
* @brief Configures the priority grouping: pre-emption priority and subpriority.
* @param NVIC_PriorityGroup: specifies the priority grouping bits length.
* This parameter can be one of the following values:
* @arg NVIC_PriorityGroup_0: 0 bits for pre-emption priority
* 4 bits for subpriority
* @arg NVIC_PriorityGroup_1: 1 bits for pre-emption priority
* 3 bits for subpriority
* @arg NVIC_PriorityGroup_2: 2 bits for pre-emption priority
* 2 bits for subpriority
* @arg NVIC_PriorityGroup_3: 3 bits for pre-emption priority
* 1 bits for subpriority
* @arg NVIC_PriorityGroup_4: 4 bits for pre-emption priority
* 0 bits for subpriority
* @note When the NVIC_PriorityGroup_0 is selected, IRQ pre-emption is no more possible.
* The pending IRQ priority will be managed only by the subpriority.
* @retval None
*/
void NVIC_PriorityGroupConfig(uint32_t NVIC_PriorityGroup)
{
/* Check the parameters */
assert_param(IS_NVIC_PRIORITY_GROUP(NVIC_PriorityGroup));
/* Set the PRIGROUP[10:8] bits according to NVIC_PriorityGroup value */
SCB->AIRCR = AIRCR_VECTKEY_MASK | NVIC_PriorityGroup;
}
/**
* @brief Initializes the NVIC peripheral according to the specified
* parameters in the NVIC_InitStruct.
* @note To configure interrupts priority correctly, the NVIC_PriorityGroupConfig()
* function should be called before.
* @param NVIC_InitStruct: pointer to a NVIC_InitTypeDef structure that contains
* the configuration information for the specified NVIC peripheral.
* @retval None
*/
void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct)
{
uint8_t tmppriority = 0x00, tmppre = 0x00, tmpsub = 0x0F;
/* Check the parameters */
assert_param(IS_FUNCTIONAL_STATE(NVIC_InitStruct->NVIC_IRQChannelCmd));
assert_param(IS_NVIC_PREEMPTION_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority));
assert_param(IS_NVIC_SUB_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelSubPriority));
if (NVIC_InitStruct->NVIC_IRQChannelCmd != DISABLE)
{
/* Compute the Corresponding IRQ Priority --------------------------------*/
tmppriority = (0x700 - ((SCB->AIRCR) & (uint32_t)0x700))>> 0x08;
tmppre = (0x4 - tmppriority);
tmpsub = tmpsub >> tmppriority;
tmppriority = NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority << tmppre;
tmppriority |= (uint8_t)(NVIC_InitStruct->NVIC_IRQChannelSubPriority & tmpsub);
tmppriority = tmppriority << 0x04;
NVIC->IP[NVIC_InitStruct->NVIC_IRQChannel] = tmppriority;
/* Enable the Selected IRQ Channels --------------------------------------*/
NVIC->ISER[NVIC_InitStruct->NVIC_IRQChannel >> 0x05] =
(uint32_t)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (uint8_t)0x1F);
}
else
{
/* Disable the Selected IRQ Channels -------------------------------------*/
NVIC->ICER[NVIC_InitStruct->NVIC_IRQChannel >> 0x05] =
(uint32_t)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (uint8_t)0x1F);
}
}
/**
* @brief Sets the vector table location and Offset.
* @param NVIC_VectTab: specifies if the vector table is in RAM or FLASH memory.
* This parameter can be one of the following values:
* @arg NVIC_VectTab_RAM: Vector Table in internal SRAM.
* @arg NVIC_VectTab_FLASH: Vector Table in internal FLASH.
* @param Offset: Vector Table base offset field. This value must be a multiple of 0x200.
* @retval None
*/
void NVIC_SetVectorTable(uint32_t NVIC_VectTab, uint32_t Offset)
{
/* Check the parameters */
assert_param(IS_NVIC_VECTTAB(NVIC_VectTab));
assert_param(IS_NVIC_OFFSET(Offset));
SCB->VTOR = NVIC_VectTab | (Offset & (uint32_t)0x1FFFFF80);
}
/**
* @brief Selects the condition for the system to enter low power mode.
* @param LowPowerMode: Specifies the new mode for the system to enter low power mode.
* This parameter can be one of the following values:
* @arg NVIC_LP_SEVONPEND: Low Power SEV on Pend.
* @arg NVIC_LP_SLEEPDEEP: Low Power DEEPSLEEP request.
* @arg NVIC_LP_SLEEPONEXIT: Low Power Sleep on Exit.
* @param NewState: new state of LP condition. This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void NVIC_SystemLPConfig(uint8_t LowPowerMode, FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_NVIC_LP(LowPowerMode));
assert_param(IS_FUNCTIONAL_STATE(NewState));
if (NewState != DISABLE)
{
SCB->SCR |= LowPowerMode;
}
else
{
SCB->SCR &= (uint32_t)(~(uint32_t)LowPowerMode);
}
}
/**
* @brief Configures the SysTick clock source.
* @param SysTick_CLKSource: specifies the SysTick clock source.
* This parameter can be one of the following values:
* @arg SysTick_CLKSource_HCLK_Div8: AHB clock divided by 8 selected as SysTick clock source.
* @arg SysTick_CLKSource_HCLK: AHB clock selected as SysTick clock source.
* @retval None
*/
void SysTick_CLKSourceConfig(uint32_t SysTick_CLKSource)
{
/* Check the parameters */
assert_param(IS_SYSTICK_CLK_SOURCE(SysTick_CLKSource));
if (SysTick_CLKSource == SysTick_CLKSource_HCLK)
{
SysTick->CTRL |= SysTick_CLKSource_HCLK;
}
else
{
SysTick->CTRL &= SysTick_CLKSource_HCLK_Div8;
}
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
@@ -1,133 +1,133 @@
/**
******************************************************************************
* @file stm32f2xx_crc.c
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file provides all the CRC firmware functions.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f2xx_crc.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @defgroup CRC
* @brief CRC driver modules
* @{
*/
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup CRC_Private_Functions
* @{
*/
/**
* @brief Resets the CRC Data register (DR).
* @param None
* @retval None
*/
void CRC_ResetDR(void)
{
/* Reset CRC generator */
CRC->CR = CRC_CR_RESET;
}
/**
* @brief Computes the 32-bit CRC of a given data word(32-bit).
* @param Data: data word(32-bit) to compute its CRC
* @retval 32-bit CRC
*/
uint32_t CRC_CalcCRC(uint32_t Data)
{
CRC->DR = Data;
return (CRC->DR);
}
/**
* @brief Computes the 32-bit CRC of a given buffer of data word(32-bit).
* @param pBuffer: pointer to the buffer containing the data to be computed
* @param BufferLength: length of the buffer to be computed
* @retval 32-bit CRC
*/
uint32_t CRC_CalcBlockCRC(uint32_t pBuffer[], uint32_t BufferLength)
{
uint32_t index = 0;
for(index = 0; index < BufferLength; index++)
{
CRC->DR = pBuffer[index];
}
return (CRC->DR);
}
/**
* @brief Returns the current CRC value.
* @param None
* @retval 32-bit CRC
*/
uint32_t CRC_GetCRC(void)
{
return (CRC->DR);
}
/**
* @brief Stores a 8-bit data in the Independent Data(ID) register.
* @param IDValue: 8-bit value to be stored in the ID register
* @retval None
*/
void CRC_SetIDRegister(uint8_t IDValue)
{
CRC->IDR = IDValue;
}
/**
* @brief Returns the 8-bit data stored in the Independent Data(ID) register
* @param None
* @retval 8-bit value of the ID register
*/
uint8_t CRC_GetIDRegister(void)
{
return (CRC->IDR);
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
/**
******************************************************************************
* @file stm32f2xx_crc.c
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file provides all the CRC firmware functions.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f2xx_crc.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @defgroup CRC
* @brief CRC driver modules
* @{
*/
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup CRC_Private_Functions
* @{
*/
/**
* @brief Resets the CRC Data register (DR).
* @param None
* @retval None
*/
void CRC_ResetDR(void)
{
/* Reset CRC generator */
CRC->CR = CRC_CR_RESET;
}
/**
* @brief Computes the 32-bit CRC of a given data word(32-bit).
* @param Data: data word(32-bit) to compute its CRC
* @retval 32-bit CRC
*/
uint32_t CRC_CalcCRC(uint32_t Data)
{
CRC->DR = Data;
return (CRC->DR);
}
/**
* @brief Computes the 32-bit CRC of a given buffer of data word(32-bit).
* @param pBuffer: pointer to the buffer containing the data to be computed
* @param BufferLength: length of the buffer to be computed
* @retval 32-bit CRC
*/
uint32_t CRC_CalcBlockCRC(uint32_t pBuffer[], uint32_t BufferLength)
{
uint32_t index = 0;
for(index = 0; index < BufferLength; index++)
{
CRC->DR = pBuffer[index];
}
return (CRC->DR);
}
/**
* @brief Returns the current CRC value.
* @param None
* @retval 32-bit CRC
*/
uint32_t CRC_GetCRC(void)
{
return (CRC->DR);
}
/**
* @brief Stores a 8-bit data in the Independent Data(ID) register.
* @param IDValue: 8-bit value to be stored in the ID register
* @retval None
*/
void CRC_SetIDRegister(uint8_t IDValue)
{
CRC->IDR = IDValue;
}
/**
* @brief Returns the 8-bit data stored in the Independent Data(ID) register
* @param None
* @retval 8-bit value of the ID register
*/
uint8_t CRC_GetIDRegister(void)
{
return (CRC->IDR);
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
@@ -1,297 +1,297 @@
/**
******************************************************************************
* @file stm32f2xx_cryp_des.c
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file provides high level functions to encrypt and decrypt an
* input message using DES in ECB/CBC modes.
* It uses the stm32f2xx_cryp.c/.h drivers to access the STM32F2xx CRYP
* peripheral.
*
* @verbatim
*
* ===================================================================
* How to use this driver
* ===================================================================
* 1. Enable The CRYP controller clock using
* RCC_AHB2PeriphClockCmd(RCC_AHB2Periph_CRYP, ENABLE); function.
*
* 2. Encrypt and decrypt using DES in ECB Mode using CRYP_DES_ECB()
* function.
*
* 3. Encrypt and decrypt using DES in CBC Mode using CRYP_DES_CBC()
* function.
*
* @endverbatim
*
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f2xx_cryp.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @defgroup CRYP
* @brief CRYP driver modules
* @{
*/
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
#define DESBUSY_TIMEOUT ((uint32_t) 0x00010000)
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup CRYP_Private_Functions
* @{
*/
/** @defgroup CRYP_Group8 High Level DES functions
* @brief High Level DES functions
*
@verbatim
===============================================================================
High Level DES functions
===============================================================================
@endverbatim
* @{
*/
/**
* @brief Encrypt and decrypt using DES in ECB Mode
* @param Mode: encryption or decryption Mode.
* This parameter can be one of the following values:
* @arg MODE_ENCRYPT: Encryption
* @arg MODE_DECRYPT: Decryption
* @param Key: Key used for DES algorithm.
* @param Ilength: length of the Input buffer, must be a multiple of 8.
* @param Input: pointer to the Input buffer.
* @param Output: pointer to the returned buffer.
* @retval An ErrorStatus enumeration value:
* - SUCCESS: Operation done
* - ERROR: Operation failed
*/
ErrorStatus CRYP_DES_ECB(uint8_t Mode, uint8_t Key[8], uint8_t *Input,
uint32_t Ilength, uint8_t *Output)
{
CRYP_InitTypeDef DES_CRYP_InitStructure;
CRYP_KeyInitTypeDef DES_CRYP_KeyInitStructure;
__IO uint32_t counter = 0;
uint32_t busystatus = 0;
ErrorStatus status = SUCCESS;
uint32_t keyaddr = (uint32_t)Key;
uint32_t inputaddr = (uint32_t)Input;
uint32_t outputaddr = (uint32_t)Output;
uint32_t i = 0;
/* Crypto structures initialisation*/
CRYP_KeyStructInit(&DES_CRYP_KeyInitStructure);
/* Crypto Init for Encryption process */
if( Mode == MODE_ENCRYPT ) /* DES encryption */
{
DES_CRYP_InitStructure.CRYP_AlgoDir = CRYP_AlgoDir_Encrypt;
}
else/* if( Mode == MODE_DECRYPT )*/ /* DES decryption */
{
DES_CRYP_InitStructure.CRYP_AlgoDir = CRYP_AlgoDir_Decrypt;
}
DES_CRYP_InitStructure.CRYP_AlgoMode = CRYP_AlgoMode_DES_ECB;
DES_CRYP_InitStructure.CRYP_DataType = CRYP_DataType_8b;
CRYP_Init(&DES_CRYP_InitStructure);
/* Key Initialisation */
DES_CRYP_KeyInitStructure.CRYP_Key1Left = __REV(*(uint32_t*)(keyaddr));
keyaddr+=4;
DES_CRYP_KeyInitStructure.CRYP_Key1Right= __REV(*(uint32_t*)(keyaddr));
CRYP_KeyInit(& DES_CRYP_KeyInitStructure);
/* Flush IN/OUT FIFO */
CRYP_FIFOFlush();
/* Enable Crypto processor */
CRYP_Cmd(ENABLE);
for(i=0; ((i<Ilength) && (status != ERROR)); i+=8)
{
/* Write the Input block in the Input FIFO */
CRYP_DataIn(*(uint32_t*)(inputaddr));
inputaddr+=4;
CRYP_DataIn(*(uint32_t*)(inputaddr));
inputaddr+=4;
/* Wait until the complete message has been processed */
counter = 0;
do
{
busystatus = CRYP_GetFlagStatus(CRYP_FLAG_BUSY);
counter++;
}while ((counter != DESBUSY_TIMEOUT) && (busystatus != RESET));
if (busystatus != RESET)
{
status = ERROR;
}
else
{
/* Read the Output block from the Output FIFO */
*(uint32_t*)(outputaddr) = CRYP_DataOut();
outputaddr+=4;
*(uint32_t*)(outputaddr) = CRYP_DataOut();
outputaddr+=4;
}
}
/* Disable Crypto */
CRYP_Cmd(DISABLE);
return status;
}
/**
* @brief Encrypt and decrypt using DES in CBC Mode
* @param Mode: encryption or decryption Mode.
* This parameter can be one of the following values:
* @arg MODE_ENCRYPT: Encryption
* @arg MODE_DECRYPT: Decryption
* @param Key: Key used for DES algorithm.
* @param InitVectors: Initialisation Vectors used for DES algorithm.
* @param Ilength: length of the Input buffer, must be a multiple of 8.
* @param Input: pointer to the Input buffer.
* @param Output: pointer to the returned buffer.
* @retval An ErrorStatus enumeration value:
* - SUCCESS: Operation done
* - ERROR: Operation failed
*/
ErrorStatus CRYP_DES_CBC(uint8_t Mode, uint8_t Key[8], uint8_t InitVectors[8],
uint8_t *Input, uint32_t Ilength, uint8_t *Output)
{
CRYP_InitTypeDef DES_CRYP_InitStructure;
CRYP_KeyInitTypeDef DES_CRYP_KeyInitStructure;
CRYP_IVInitTypeDef DES_CRYP_IVInitStructure;
__IO uint32_t counter = 0;
uint32_t busystatus = 0;
ErrorStatus status = SUCCESS;
uint32_t keyaddr = (uint32_t)Key;
uint32_t inputaddr = (uint32_t)Input;
uint32_t outputaddr = (uint32_t)Output;
uint32_t ivaddr = (uint32_t)InitVectors;
uint32_t i = 0;
/* Crypto structures initialisation*/
CRYP_KeyStructInit(&DES_CRYP_KeyInitStructure);
/* Crypto Init for Encryption process */
if(Mode == MODE_ENCRYPT) /* DES encryption */
{
DES_CRYP_InitStructure.CRYP_AlgoDir = CRYP_AlgoDir_Encrypt;
}
else /*if(Mode == MODE_DECRYPT)*/ /* DES decryption */
{
DES_CRYP_InitStructure.CRYP_AlgoDir = CRYP_AlgoDir_Decrypt;
}
DES_CRYP_InitStructure.CRYP_AlgoMode = CRYP_AlgoMode_DES_CBC;
DES_CRYP_InitStructure.CRYP_DataType = CRYP_DataType_8b;
CRYP_Init(&DES_CRYP_InitStructure);
/* Key Initialisation */
DES_CRYP_KeyInitStructure.CRYP_Key1Left = __REV(*(uint32_t*)(keyaddr));
keyaddr+=4;
DES_CRYP_KeyInitStructure.CRYP_Key1Right= __REV(*(uint32_t*)(keyaddr));
CRYP_KeyInit(& DES_CRYP_KeyInitStructure);
/* Initialization Vectors */
DES_CRYP_IVInitStructure.CRYP_IV0Left = __REV(*(uint32_t*)(ivaddr));
ivaddr+=4;
DES_CRYP_IVInitStructure.CRYP_IV0Right= __REV(*(uint32_t*)(ivaddr));
CRYP_IVInit(&DES_CRYP_IVInitStructure);
/* Flush IN/OUT FIFO */
CRYP_FIFOFlush();
/* Enable Crypto processor */
CRYP_Cmd(ENABLE);
for(i=0; ((i<Ilength) && (status != ERROR)); i+=8)
{
/* Write the Input block in the Input FIFO */
CRYP_DataIn(*(uint32_t*)(inputaddr));
inputaddr+=4;
CRYP_DataIn(*(uint32_t*)(inputaddr));
inputaddr+=4;
/* Wait until the complete message has been processed */
counter = 0;
do
{
busystatus = CRYP_GetFlagStatus(CRYP_FLAG_BUSY);
counter++;
}while ((counter != DESBUSY_TIMEOUT) && (busystatus != RESET));
if (busystatus != RESET)
{
status = ERROR;
}
else
{
/* Read the Output block from the Output FIFO */
*(uint32_t*)(outputaddr) = CRYP_DataOut();
outputaddr+=4;
*(uint32_t*)(outputaddr) = CRYP_DataOut();
outputaddr+=4;
}
}
/* Disable Crypto */
CRYP_Cmd(DISABLE);
return status;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
/**
******************************************************************************
* @file stm32f2xx_cryp_des.c
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file provides high level functions to encrypt and decrypt an
* input message using DES in ECB/CBC modes.
* It uses the stm32f2xx_cryp.c/.h drivers to access the STM32F2xx CRYP
* peripheral.
*
* @verbatim
*
* ===================================================================
* How to use this driver
* ===================================================================
* 1. Enable The CRYP controller clock using
* RCC_AHB2PeriphClockCmd(RCC_AHB2Periph_CRYP, ENABLE); function.
*
* 2. Encrypt and decrypt using DES in ECB Mode using CRYP_DES_ECB()
* function.
*
* 3. Encrypt and decrypt using DES in CBC Mode using CRYP_DES_CBC()
* function.
*
* @endverbatim
*
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f2xx_cryp.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @defgroup CRYP
* @brief CRYP driver modules
* @{
*/
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
#define DESBUSY_TIMEOUT ((uint32_t) 0x00010000)
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup CRYP_Private_Functions
* @{
*/
/** @defgroup CRYP_Group8 High Level DES functions
* @brief High Level DES functions
*
@verbatim
===============================================================================
High Level DES functions
===============================================================================
@endverbatim
* @{
*/
/**
* @brief Encrypt and decrypt using DES in ECB Mode
* @param Mode: encryption or decryption Mode.
* This parameter can be one of the following values:
* @arg MODE_ENCRYPT: Encryption
* @arg MODE_DECRYPT: Decryption
* @param Key: Key used for DES algorithm.
* @param Ilength: length of the Input buffer, must be a multiple of 8.
* @param Input: pointer to the Input buffer.
* @param Output: pointer to the returned buffer.
* @retval An ErrorStatus enumeration value:
* - SUCCESS: Operation done
* - ERROR: Operation failed
*/
ErrorStatus CRYP_DES_ECB(uint8_t Mode, uint8_t Key[8], uint8_t *Input,
uint32_t Ilength, uint8_t *Output)
{
CRYP_InitTypeDef DES_CRYP_InitStructure;
CRYP_KeyInitTypeDef DES_CRYP_KeyInitStructure;
__IO uint32_t counter = 0;
uint32_t busystatus = 0;
ErrorStatus status = SUCCESS;
uint32_t keyaddr = (uint32_t)Key;
uint32_t inputaddr = (uint32_t)Input;
uint32_t outputaddr = (uint32_t)Output;
uint32_t i = 0;
/* Crypto structures initialisation*/
CRYP_KeyStructInit(&DES_CRYP_KeyInitStructure);
/* Crypto Init for Encryption process */
if( Mode == MODE_ENCRYPT ) /* DES encryption */
{
DES_CRYP_InitStructure.CRYP_AlgoDir = CRYP_AlgoDir_Encrypt;
}
else/* if( Mode == MODE_DECRYPT )*/ /* DES decryption */
{
DES_CRYP_InitStructure.CRYP_AlgoDir = CRYP_AlgoDir_Decrypt;
}
DES_CRYP_InitStructure.CRYP_AlgoMode = CRYP_AlgoMode_DES_ECB;
DES_CRYP_InitStructure.CRYP_DataType = CRYP_DataType_8b;
CRYP_Init(&DES_CRYP_InitStructure);
/* Key Initialisation */
DES_CRYP_KeyInitStructure.CRYP_Key1Left = __REV(*(uint32_t*)(keyaddr));
keyaddr+=4;
DES_CRYP_KeyInitStructure.CRYP_Key1Right= __REV(*(uint32_t*)(keyaddr));
CRYP_KeyInit(& DES_CRYP_KeyInitStructure);
/* Flush IN/OUT FIFO */
CRYP_FIFOFlush();
/* Enable Crypto processor */
CRYP_Cmd(ENABLE);
for(i=0; ((i<Ilength) && (status != ERROR)); i+=8)
{
/* Write the Input block in the Input FIFO */
CRYP_DataIn(*(uint32_t*)(inputaddr));
inputaddr+=4;
CRYP_DataIn(*(uint32_t*)(inputaddr));
inputaddr+=4;
/* Wait until the complete message has been processed */
counter = 0;
do
{
busystatus = CRYP_GetFlagStatus(CRYP_FLAG_BUSY);
counter++;
}while ((counter != DESBUSY_TIMEOUT) && (busystatus != RESET));
if (busystatus != RESET)
{
status = ERROR;
}
else
{
/* Read the Output block from the Output FIFO */
*(uint32_t*)(outputaddr) = CRYP_DataOut();
outputaddr+=4;
*(uint32_t*)(outputaddr) = CRYP_DataOut();
outputaddr+=4;
}
}
/* Disable Crypto */
CRYP_Cmd(DISABLE);
return status;
}
/**
* @brief Encrypt and decrypt using DES in CBC Mode
* @param Mode: encryption or decryption Mode.
* This parameter can be one of the following values:
* @arg MODE_ENCRYPT: Encryption
* @arg MODE_DECRYPT: Decryption
* @param Key: Key used for DES algorithm.
* @param InitVectors: Initialisation Vectors used for DES algorithm.
* @param Ilength: length of the Input buffer, must be a multiple of 8.
* @param Input: pointer to the Input buffer.
* @param Output: pointer to the returned buffer.
* @retval An ErrorStatus enumeration value:
* - SUCCESS: Operation done
* - ERROR: Operation failed
*/
ErrorStatus CRYP_DES_CBC(uint8_t Mode, uint8_t Key[8], uint8_t InitVectors[8],
uint8_t *Input, uint32_t Ilength, uint8_t *Output)
{
CRYP_InitTypeDef DES_CRYP_InitStructure;
CRYP_KeyInitTypeDef DES_CRYP_KeyInitStructure;
CRYP_IVInitTypeDef DES_CRYP_IVInitStructure;
__IO uint32_t counter = 0;
uint32_t busystatus = 0;
ErrorStatus status = SUCCESS;
uint32_t keyaddr = (uint32_t)Key;
uint32_t inputaddr = (uint32_t)Input;
uint32_t outputaddr = (uint32_t)Output;
uint32_t ivaddr = (uint32_t)InitVectors;
uint32_t i = 0;
/* Crypto structures initialisation*/
CRYP_KeyStructInit(&DES_CRYP_KeyInitStructure);
/* Crypto Init for Encryption process */
if(Mode == MODE_ENCRYPT) /* DES encryption */
{
DES_CRYP_InitStructure.CRYP_AlgoDir = CRYP_AlgoDir_Encrypt;
}
else /*if(Mode == MODE_DECRYPT)*/ /* DES decryption */
{
DES_CRYP_InitStructure.CRYP_AlgoDir = CRYP_AlgoDir_Decrypt;
}
DES_CRYP_InitStructure.CRYP_AlgoMode = CRYP_AlgoMode_DES_CBC;
DES_CRYP_InitStructure.CRYP_DataType = CRYP_DataType_8b;
CRYP_Init(&DES_CRYP_InitStructure);
/* Key Initialisation */
DES_CRYP_KeyInitStructure.CRYP_Key1Left = __REV(*(uint32_t*)(keyaddr));
keyaddr+=4;
DES_CRYP_KeyInitStructure.CRYP_Key1Right= __REV(*(uint32_t*)(keyaddr));
CRYP_KeyInit(& DES_CRYP_KeyInitStructure);
/* Initialization Vectors */
DES_CRYP_IVInitStructure.CRYP_IV0Left = __REV(*(uint32_t*)(ivaddr));
ivaddr+=4;
DES_CRYP_IVInitStructure.CRYP_IV0Right= __REV(*(uint32_t*)(ivaddr));
CRYP_IVInit(&DES_CRYP_IVInitStructure);
/* Flush IN/OUT FIFO */
CRYP_FIFOFlush();
/* Enable Crypto processor */
CRYP_Cmd(ENABLE);
for(i=0; ((i<Ilength) && (status != ERROR)); i+=8)
{
/* Write the Input block in the Input FIFO */
CRYP_DataIn(*(uint32_t*)(inputaddr));
inputaddr+=4;
CRYP_DataIn(*(uint32_t*)(inputaddr));
inputaddr+=4;
/* Wait until the complete message has been processed */
counter = 0;
do
{
busystatus = CRYP_GetFlagStatus(CRYP_FLAG_BUSY);
counter++;
}while ((counter != DESBUSY_TIMEOUT) && (busystatus != RESET));
if (busystatus != RESET)
{
status = ERROR;
}
else
{
/* Read the Output block from the Output FIFO */
*(uint32_t*)(outputaddr) = CRYP_DataOut();
outputaddr+=4;
*(uint32_t*)(outputaddr) = CRYP_DataOut();
outputaddr+=4;
}
}
/* Disable Crypto */
CRYP_Cmd(DISABLE);
return status;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
@@ -1,314 +1,314 @@
/**
******************************************************************************
* @file stm32f2xx_cryp_tdes.c
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file provides high level functions to encrypt and decrypt an
* input message using TDES in ECB/CBC modes .
* It uses the stm32f2xx_cryp.c/.h drivers to access the STM32F2xx CRYP
* peripheral.
*
* @verbatim
*
* ===================================================================
* How to use this driver
* ===================================================================
* 1. Enable The CRYP controller clock using
* RCC_AHB2PeriphClockCmd(RCC_AHB2Periph_CRYP, ENABLE); function.
*
* 2. Encrypt and decrypt using TDES in ECB Mode using CRYP_TDES_ECB()
* function.
*
* 3. Encrypt and decrypt using TDES in CBC Mode using CRYP_TDES_CBC()
* function.
*
* @endverbatim
*
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f2xx_cryp.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @defgroup CRYP
* @brief CRYP driver modules
* @{
*/
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
#define TDESBUSY_TIMEOUT ((uint32_t) 0x00010000)
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup CRYP_Private_Functions
* @{
*/
/** @defgroup CRYP_Group7 High Level TDES functions
* @brief High Level TDES functions
*
@verbatim
===============================================================================
High Level TDES functions
===============================================================================
@endverbatim
* @{
*/
/**
* @brief Encrypt and decrypt using TDES in ECB Mode
* @param Mode: encryption or decryption Mode.
* This parameter can be one of the following values:
* @arg MODE_ENCRYPT: Encryption
* @arg MODE_DECRYPT: Decryption
* @param Key: Key used for TDES algorithm.
* @param Ilength: length of the Input buffer, must be a multiple of 8.
* @param Input: pointer to the Input buffer.
* @param Output: pointer to the returned buffer.
* @retval An ErrorStatus enumeration value:
* - SUCCESS: Operation done
* - ERROR: Operation failed
*/
ErrorStatus CRYP_TDES_ECB(uint8_t Mode, uint8_t Key[24], uint8_t *Input,
uint32_t Ilength, uint8_t *Output)
{
CRYP_InitTypeDef TDES_CRYP_InitStructure;
CRYP_KeyInitTypeDef TDES_CRYP_KeyInitStructure;
__IO uint32_t counter = 0;
uint32_t busystatus = 0;
ErrorStatus status = SUCCESS;
uint32_t keyaddr = (uint32_t)Key;
uint32_t inputaddr = (uint32_t)Input;
uint32_t outputaddr = (uint32_t)Output;
uint32_t i = 0;
/* Crypto structures initialisation*/
CRYP_KeyStructInit(&TDES_CRYP_KeyInitStructure);
/* Crypto Init for Encryption process */
if(Mode == MODE_ENCRYPT) /* TDES encryption */
{
TDES_CRYP_InitStructure.CRYP_AlgoDir = CRYP_AlgoDir_Encrypt;
}
else /*if(Mode == MODE_DECRYPT)*/ /* TDES decryption */
{
TDES_CRYP_InitStructure.CRYP_AlgoDir = CRYP_AlgoDir_Decrypt;
}
TDES_CRYP_InitStructure.CRYP_AlgoMode = CRYP_AlgoMode_TDES_ECB;
TDES_CRYP_InitStructure.CRYP_DataType = CRYP_DataType_8b;
CRYP_Init(&TDES_CRYP_InitStructure);
/* Key Initialisation */
TDES_CRYP_KeyInitStructure.CRYP_Key1Left = __REV(*(uint32_t*)(keyaddr));
keyaddr+=4;
TDES_CRYP_KeyInitStructure.CRYP_Key1Right= __REV(*(uint32_t*)(keyaddr));
keyaddr+=4;
TDES_CRYP_KeyInitStructure.CRYP_Key2Left = __REV(*(uint32_t*)(keyaddr));
keyaddr+=4;
TDES_CRYP_KeyInitStructure.CRYP_Key2Right= __REV(*(uint32_t*)(keyaddr));
keyaddr+=4;
TDES_CRYP_KeyInitStructure.CRYP_Key3Left = __REV(*(uint32_t*)(keyaddr));
keyaddr+=4;
TDES_CRYP_KeyInitStructure.CRYP_Key3Right= __REV(*(uint32_t*)(keyaddr));
CRYP_KeyInit(& TDES_CRYP_KeyInitStructure);
/* Flush IN/OUT FIFO */
CRYP_FIFOFlush();
/* Enable Crypto processor */
CRYP_Cmd(ENABLE);
for(i=0; ((i<Ilength) && (status != ERROR)); i+=8)
{
/* Write the Input block in the Input FIFO */
CRYP_DataIn(*(uint32_t*)(inputaddr));
inputaddr+=4;
CRYP_DataIn(*(uint32_t*)(inputaddr));
inputaddr+=4;
/* Wait until the complete message has been processed */
counter = 0;
do
{
busystatus = CRYP_GetFlagStatus(CRYP_FLAG_BUSY);
counter++;
}while ((counter != TDESBUSY_TIMEOUT) && (busystatus != RESET));
if (busystatus != RESET)
{
status = ERROR;
}
else
{
/* Read the Output block from the Output FIFO */
*(uint32_t*)(outputaddr) = CRYP_DataOut();
outputaddr+=4;
*(uint32_t*)(outputaddr) = CRYP_DataOut();
outputaddr+=4;
}
}
/* Disable Crypto */
CRYP_Cmd(DISABLE);
return status;
}
/**
* @brief Encrypt and decrypt using TDES in CBC Mode
* @param Mode: encryption or decryption Mode.
* This parameter can be one of the following values:
* @arg MODE_ENCRYPT: Encryption
* @arg MODE_DECRYPT: Decryption
* @param Key: Key used for TDES algorithm.
* @param InitVectors: Initialisation Vectors used for TDES algorithm.
* @param Input: pointer to the Input buffer.
* @param Ilength: length of the Input buffer, must be a multiple of 8.
* @param Output: pointer to the returned buffer.
* @retval An ErrorStatus enumeration value:
* - SUCCESS: Operation done
* - ERROR: Operation failed
*/
ErrorStatus CRYP_TDES_CBC(uint8_t Mode, uint8_t Key[24], uint8_t InitVectors[8],
uint8_t *Input, uint32_t Ilength, uint8_t *Output)
{
CRYP_InitTypeDef TDES_CRYP_InitStructure;
CRYP_KeyInitTypeDef TDES_CRYP_KeyInitStructure;
CRYP_IVInitTypeDef TDES_CRYP_IVInitStructure;
__IO uint32_t counter = 0;
uint32_t busystatus = 0;
ErrorStatus status = SUCCESS;
uint32_t keyaddr = (uint32_t)Key;
uint32_t inputaddr = (uint32_t)Input;
uint32_t outputaddr = (uint32_t)Output;
uint32_t ivaddr = (uint32_t)InitVectors;
uint32_t i = 0;
/* Crypto structures initialisation*/
CRYP_KeyStructInit(&TDES_CRYP_KeyInitStructure);
/* Crypto Init for Encryption process */
if(Mode == MODE_ENCRYPT) /* TDES encryption */
{
TDES_CRYP_InitStructure.CRYP_AlgoDir = CRYP_AlgoDir_Encrypt;
}
else
{
TDES_CRYP_InitStructure.CRYP_AlgoDir = CRYP_AlgoDir_Decrypt;
}
TDES_CRYP_InitStructure.CRYP_AlgoMode = CRYP_AlgoMode_TDES_CBC;
TDES_CRYP_InitStructure.CRYP_DataType = CRYP_DataType_8b;
CRYP_Init(&TDES_CRYP_InitStructure);
/* Key Initialisation */
TDES_CRYP_KeyInitStructure.CRYP_Key1Left = __REV(*(uint32_t*)(keyaddr));
keyaddr+=4;
TDES_CRYP_KeyInitStructure.CRYP_Key1Right= __REV(*(uint32_t*)(keyaddr));
keyaddr+=4;
TDES_CRYP_KeyInitStructure.CRYP_Key2Left = __REV(*(uint32_t*)(keyaddr));
keyaddr+=4;
TDES_CRYP_KeyInitStructure.CRYP_Key2Right= __REV(*(uint32_t*)(keyaddr));
keyaddr+=4;
TDES_CRYP_KeyInitStructure.CRYP_Key3Left = __REV(*(uint32_t*)(keyaddr));
keyaddr+=4;
TDES_CRYP_KeyInitStructure.CRYP_Key3Right= __REV(*(uint32_t*)(keyaddr));
CRYP_KeyInit(& TDES_CRYP_KeyInitStructure);
/* Initialization Vectors */
TDES_CRYP_IVInitStructure.CRYP_IV0Left = __REV(*(uint32_t*)(ivaddr));
ivaddr+=4;
TDES_CRYP_IVInitStructure.CRYP_IV0Right= __REV(*(uint32_t*)(ivaddr));
CRYP_IVInit(&TDES_CRYP_IVInitStructure);
/* Flush IN/OUT FIFO */
CRYP_FIFOFlush();
/* Enable Crypto processor */
CRYP_Cmd(ENABLE);
for(i=0; ((i<Ilength) && (status != ERROR)); i+=8)
{
/* Write the Input block in the Input FIFO */
CRYP_DataIn(*(uint32_t*)(inputaddr));
inputaddr+=4;
CRYP_DataIn(*(uint32_t*)(inputaddr));
inputaddr+=4;
/* Wait until the complete message has been processed */
counter = 0;
do
{
busystatus = CRYP_GetFlagStatus(CRYP_FLAG_BUSY);
counter++;
}while ((counter != TDESBUSY_TIMEOUT) && (busystatus != RESET));
if (busystatus != RESET)
{
status = ERROR;
}
else
{
/* Read the Output block from the Output FIFO */
*(uint32_t*)(outputaddr) = CRYP_DataOut();
outputaddr+=4;
*(uint32_t*)(outputaddr) = CRYP_DataOut();
outputaddr+=4;
}
}
/* Disable Crypto */
CRYP_Cmd(DISABLE);
return status;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
/**
******************************************************************************
* @file stm32f2xx_cryp_tdes.c
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file provides high level functions to encrypt and decrypt an
* input message using TDES in ECB/CBC modes .
* It uses the stm32f2xx_cryp.c/.h drivers to access the STM32F2xx CRYP
* peripheral.
*
* @verbatim
*
* ===================================================================
* How to use this driver
* ===================================================================
* 1. Enable The CRYP controller clock using
* RCC_AHB2PeriphClockCmd(RCC_AHB2Periph_CRYP, ENABLE); function.
*
* 2. Encrypt and decrypt using TDES in ECB Mode using CRYP_TDES_ECB()
* function.
*
* 3. Encrypt and decrypt using TDES in CBC Mode using CRYP_TDES_CBC()
* function.
*
* @endverbatim
*
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f2xx_cryp.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @defgroup CRYP
* @brief CRYP driver modules
* @{
*/
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
#define TDESBUSY_TIMEOUT ((uint32_t) 0x00010000)
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup CRYP_Private_Functions
* @{
*/
/** @defgroup CRYP_Group7 High Level TDES functions
* @brief High Level TDES functions
*
@verbatim
===============================================================================
High Level TDES functions
===============================================================================
@endverbatim
* @{
*/
/**
* @brief Encrypt and decrypt using TDES in ECB Mode
* @param Mode: encryption or decryption Mode.
* This parameter can be one of the following values:
* @arg MODE_ENCRYPT: Encryption
* @arg MODE_DECRYPT: Decryption
* @param Key: Key used for TDES algorithm.
* @param Ilength: length of the Input buffer, must be a multiple of 8.
* @param Input: pointer to the Input buffer.
* @param Output: pointer to the returned buffer.
* @retval An ErrorStatus enumeration value:
* - SUCCESS: Operation done
* - ERROR: Operation failed
*/
ErrorStatus CRYP_TDES_ECB(uint8_t Mode, uint8_t Key[24], uint8_t *Input,
uint32_t Ilength, uint8_t *Output)
{
CRYP_InitTypeDef TDES_CRYP_InitStructure;
CRYP_KeyInitTypeDef TDES_CRYP_KeyInitStructure;
__IO uint32_t counter = 0;
uint32_t busystatus = 0;
ErrorStatus status = SUCCESS;
uint32_t keyaddr = (uint32_t)Key;
uint32_t inputaddr = (uint32_t)Input;
uint32_t outputaddr = (uint32_t)Output;
uint32_t i = 0;
/* Crypto structures initialisation*/
CRYP_KeyStructInit(&TDES_CRYP_KeyInitStructure);
/* Crypto Init for Encryption process */
if(Mode == MODE_ENCRYPT) /* TDES encryption */
{
TDES_CRYP_InitStructure.CRYP_AlgoDir = CRYP_AlgoDir_Encrypt;
}
else /*if(Mode == MODE_DECRYPT)*/ /* TDES decryption */
{
TDES_CRYP_InitStructure.CRYP_AlgoDir = CRYP_AlgoDir_Decrypt;
}
TDES_CRYP_InitStructure.CRYP_AlgoMode = CRYP_AlgoMode_TDES_ECB;
TDES_CRYP_InitStructure.CRYP_DataType = CRYP_DataType_8b;
CRYP_Init(&TDES_CRYP_InitStructure);
/* Key Initialisation */
TDES_CRYP_KeyInitStructure.CRYP_Key1Left = __REV(*(uint32_t*)(keyaddr));
keyaddr+=4;
TDES_CRYP_KeyInitStructure.CRYP_Key1Right= __REV(*(uint32_t*)(keyaddr));
keyaddr+=4;
TDES_CRYP_KeyInitStructure.CRYP_Key2Left = __REV(*(uint32_t*)(keyaddr));
keyaddr+=4;
TDES_CRYP_KeyInitStructure.CRYP_Key2Right= __REV(*(uint32_t*)(keyaddr));
keyaddr+=4;
TDES_CRYP_KeyInitStructure.CRYP_Key3Left = __REV(*(uint32_t*)(keyaddr));
keyaddr+=4;
TDES_CRYP_KeyInitStructure.CRYP_Key3Right= __REV(*(uint32_t*)(keyaddr));
CRYP_KeyInit(& TDES_CRYP_KeyInitStructure);
/* Flush IN/OUT FIFO */
CRYP_FIFOFlush();
/* Enable Crypto processor */
CRYP_Cmd(ENABLE);
for(i=0; ((i<Ilength) && (status != ERROR)); i+=8)
{
/* Write the Input block in the Input FIFO */
CRYP_DataIn(*(uint32_t*)(inputaddr));
inputaddr+=4;
CRYP_DataIn(*(uint32_t*)(inputaddr));
inputaddr+=4;
/* Wait until the complete message has been processed */
counter = 0;
do
{
busystatus = CRYP_GetFlagStatus(CRYP_FLAG_BUSY);
counter++;
}while ((counter != TDESBUSY_TIMEOUT) && (busystatus != RESET));
if (busystatus != RESET)
{
status = ERROR;
}
else
{
/* Read the Output block from the Output FIFO */
*(uint32_t*)(outputaddr) = CRYP_DataOut();
outputaddr+=4;
*(uint32_t*)(outputaddr) = CRYP_DataOut();
outputaddr+=4;
}
}
/* Disable Crypto */
CRYP_Cmd(DISABLE);
return status;
}
/**
* @brief Encrypt and decrypt using TDES in CBC Mode
* @param Mode: encryption or decryption Mode.
* This parameter can be one of the following values:
* @arg MODE_ENCRYPT: Encryption
* @arg MODE_DECRYPT: Decryption
* @param Key: Key used for TDES algorithm.
* @param InitVectors: Initialisation Vectors used for TDES algorithm.
* @param Input: pointer to the Input buffer.
* @param Ilength: length of the Input buffer, must be a multiple of 8.
* @param Output: pointer to the returned buffer.
* @retval An ErrorStatus enumeration value:
* - SUCCESS: Operation done
* - ERROR: Operation failed
*/
ErrorStatus CRYP_TDES_CBC(uint8_t Mode, uint8_t Key[24], uint8_t InitVectors[8],
uint8_t *Input, uint32_t Ilength, uint8_t *Output)
{
CRYP_InitTypeDef TDES_CRYP_InitStructure;
CRYP_KeyInitTypeDef TDES_CRYP_KeyInitStructure;
CRYP_IVInitTypeDef TDES_CRYP_IVInitStructure;
__IO uint32_t counter = 0;
uint32_t busystatus = 0;
ErrorStatus status = SUCCESS;
uint32_t keyaddr = (uint32_t)Key;
uint32_t inputaddr = (uint32_t)Input;
uint32_t outputaddr = (uint32_t)Output;
uint32_t ivaddr = (uint32_t)InitVectors;
uint32_t i = 0;
/* Crypto structures initialisation*/
CRYP_KeyStructInit(&TDES_CRYP_KeyInitStructure);
/* Crypto Init for Encryption process */
if(Mode == MODE_ENCRYPT) /* TDES encryption */
{
TDES_CRYP_InitStructure.CRYP_AlgoDir = CRYP_AlgoDir_Encrypt;
}
else
{
TDES_CRYP_InitStructure.CRYP_AlgoDir = CRYP_AlgoDir_Decrypt;
}
TDES_CRYP_InitStructure.CRYP_AlgoMode = CRYP_AlgoMode_TDES_CBC;
TDES_CRYP_InitStructure.CRYP_DataType = CRYP_DataType_8b;
CRYP_Init(&TDES_CRYP_InitStructure);
/* Key Initialisation */
TDES_CRYP_KeyInitStructure.CRYP_Key1Left = __REV(*(uint32_t*)(keyaddr));
keyaddr+=4;
TDES_CRYP_KeyInitStructure.CRYP_Key1Right= __REV(*(uint32_t*)(keyaddr));
keyaddr+=4;
TDES_CRYP_KeyInitStructure.CRYP_Key2Left = __REV(*(uint32_t*)(keyaddr));
keyaddr+=4;
TDES_CRYP_KeyInitStructure.CRYP_Key2Right= __REV(*(uint32_t*)(keyaddr));
keyaddr+=4;
TDES_CRYP_KeyInitStructure.CRYP_Key3Left = __REV(*(uint32_t*)(keyaddr));
keyaddr+=4;
TDES_CRYP_KeyInitStructure.CRYP_Key3Right= __REV(*(uint32_t*)(keyaddr));
CRYP_KeyInit(& TDES_CRYP_KeyInitStructure);
/* Initialization Vectors */
TDES_CRYP_IVInitStructure.CRYP_IV0Left = __REV(*(uint32_t*)(ivaddr));
ivaddr+=4;
TDES_CRYP_IVInitStructure.CRYP_IV0Right= __REV(*(uint32_t*)(ivaddr));
CRYP_IVInit(&TDES_CRYP_IVInitStructure);
/* Flush IN/OUT FIFO */
CRYP_FIFOFlush();
/* Enable Crypto processor */
CRYP_Cmd(ENABLE);
for(i=0; ((i<Ilength) && (status != ERROR)); i+=8)
{
/* Write the Input block in the Input FIFO */
CRYP_DataIn(*(uint32_t*)(inputaddr));
inputaddr+=4;
CRYP_DataIn(*(uint32_t*)(inputaddr));
inputaddr+=4;
/* Wait until the complete message has been processed */
counter = 0;
do
{
busystatus = CRYP_GetFlagStatus(CRYP_FLAG_BUSY);
counter++;
}while ((counter != TDESBUSY_TIMEOUT) && (busystatus != RESET));
if (busystatus != RESET)
{
status = ERROR;
}
else
{
/* Read the Output block from the Output FIFO */
*(uint32_t*)(outputaddr) = CRYP_DataOut();
outputaddr+=4;
*(uint32_t*)(outputaddr) = CRYP_DataOut();
outputaddr+=4;
}
}
/* Disable Crypto */
CRYP_Cmd(DISABLE);
return status;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
@@ -1,180 +1,180 @@
/**
******************************************************************************
* @file stm32f2xx_dbgmcu.c
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file provides all the DBGMCU firmware functions.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f2xx_dbgmcu.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @defgroup DBGMCU
* @brief DBGMCU driver modules
* @{
*/
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
#define IDCODE_DEVID_MASK ((uint32_t)0x00000FFF)
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup DBGMCU_Private_Functions
* @{
*/
/**
* @brief Returns the device revision identifier.
* @param None
* @retval Device revision identifier
*/
uint32_t DBGMCU_GetREVID(void)
{
return(DBGMCU->IDCODE >> 16);
}
/**
* @brief Returns the device identifier.
* @param None
* @retval Device identifier
*/
uint32_t DBGMCU_GetDEVID(void)
{
return(DBGMCU->IDCODE & IDCODE_DEVID_MASK);
}
/**
* @brief Configures low power mode behavior when the MCU is in Debug mode.
* @param DBGMCU_Periph: specifies the low power mode.
* This parameter can be any combination of the following values:
* @arg DBGMCU_SLEEP: Keep debugger connection during SLEEP mode
* @arg DBGMCU_STOP: Keep debugger connection during STOP mode
* @arg DBGMCU_STANDBY: Keep debugger connection during STANDBY mode
* @param NewState: new state of the specified low power mode in Debug mode.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void DBGMCU_Config(uint32_t DBGMCU_Periph, FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_DBGMCU_PERIPH(DBGMCU_Periph));
assert_param(IS_FUNCTIONAL_STATE(NewState));
if (NewState != DISABLE)
{
DBGMCU->CR |= DBGMCU_Periph;
}
else
{
DBGMCU->CR &= ~DBGMCU_Periph;
}
}
/**
* @brief Configures APB1 peripheral behavior when the MCU is in Debug mode.
* @param DBGMCU_Periph: specifies the APB1 peripheral.
* This parameter can be any combination of the following values:
* @arg DBGMCU_TIM2_STOP: TIM2 counter stopped when Core is halted
* @arg DBGMCU_TIM3_STOP: TIM3 counter stopped when Core is halted
* @arg DBGMCU_TIM4_STOP: TIM4 counter stopped when Core is halted
* @arg DBGMCU_TIM5_STOP: TIM5 counter stopped when Core is halted
* @arg DBGMCU_TIM6_STOP: TIM6 counter stopped when Core is halted
* @arg DBGMCU_TIM7_STOP: TIM7 counter stopped when Core is halted
* @arg DBGMCU_TIM12_STOP: TIM12 counter stopped when Core is halted
* @arg DBGMCU_TIM13_STOP: TIM13 counter stopped when Core is halted
* @arg DBGMCU_TIM14_STOP: TIM14 counter stopped when Core is halted
* @arg DBGMCU_RTC_STOP: RTC Wakeup counter stopped when Core is halted.
* @arg DBGMCU_WWDG_STOP: Debug WWDG stopped when Core is halted
* @arg DBGMCU_IWDG_STOP: Debug IWDG stopped when Core is halted
* @arg DBGMCU_I2C1_SMBUS_TIMEOUT: I2C1 SMBUS timeout mode stopped when Core is halted
* @arg DBGMCU_I2C2_SMBUS_TIMEOUT: I2C2 SMBUS timeout mode stopped when Core is halted
* @arg DBGMCU_I2C3_SMBUS_TIMEOUT: I2C3 SMBUS timeout mode stopped when Core is halted
* @arg DBGMCU_CAN2_STOP: Debug CAN1 stopped when Core is halted
* @arg DBGMCU_CAN1_STOP: Debug CAN2 stopped when Core is halted
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void DBGMCU_APB1PeriphConfig(uint32_t DBGMCU_Periph, FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_DBGMCU_APB1PERIPH(DBGMCU_Periph));
assert_param(IS_FUNCTIONAL_STATE(NewState));
if (NewState != DISABLE)
{
DBGMCU->APB1FZ |= DBGMCU_Periph;
}
else
{
DBGMCU->APB1FZ &= ~DBGMCU_Periph;
}
}
/**
* @brief Configures APB2 peripheral behavior when the MCU is in Debug mode.
* @param DBGMCU_Periph: specifies the APB2 peripheral.
* This parameter can be any combination of the following values:
* @arg DBGMCU_TIM1_STOP: TIM1 counter stopped when Core is halted
* @arg DBGMCU_TIM8_STOP: TIM8 counter stopped when Core is halted
* @arg DBGMCU_TIM9_STOP: TIM9 counter stopped when Core is halted
* @arg DBGMCU_TIM10_STOP: TIM10 counter stopped when Core is halted
* @arg DBGMCU_TIM11_STOP: TIM11 counter stopped when Core is halted
* @param NewState: new state of the specified peripheral in Debug mode.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void DBGMCU_APB2PeriphConfig(uint32_t DBGMCU_Periph, FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_DBGMCU_APB2PERIPH(DBGMCU_Periph));
assert_param(IS_FUNCTIONAL_STATE(NewState));
if (NewState != DISABLE)
{
DBGMCU->APB2FZ |= DBGMCU_Periph;
}
else
{
DBGMCU->APB2FZ &= ~DBGMCU_Periph;
}
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
/**
******************************************************************************
* @file stm32f2xx_dbgmcu.c
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file provides all the DBGMCU firmware functions.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f2xx_dbgmcu.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @defgroup DBGMCU
* @brief DBGMCU driver modules
* @{
*/
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
#define IDCODE_DEVID_MASK ((uint32_t)0x00000FFF)
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup DBGMCU_Private_Functions
* @{
*/
/**
* @brief Returns the device revision identifier.
* @param None
* @retval Device revision identifier
*/
uint32_t DBGMCU_GetREVID(void)
{
return(DBGMCU->IDCODE >> 16);
}
/**
* @brief Returns the device identifier.
* @param None
* @retval Device identifier
*/
uint32_t DBGMCU_GetDEVID(void)
{
return(DBGMCU->IDCODE & IDCODE_DEVID_MASK);
}
/**
* @brief Configures low power mode behavior when the MCU is in Debug mode.
* @param DBGMCU_Periph: specifies the low power mode.
* This parameter can be any combination of the following values:
* @arg DBGMCU_SLEEP: Keep debugger connection during SLEEP mode
* @arg DBGMCU_STOP: Keep debugger connection during STOP mode
* @arg DBGMCU_STANDBY: Keep debugger connection during STANDBY mode
* @param NewState: new state of the specified low power mode in Debug mode.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void DBGMCU_Config(uint32_t DBGMCU_Periph, FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_DBGMCU_PERIPH(DBGMCU_Periph));
assert_param(IS_FUNCTIONAL_STATE(NewState));
if (NewState != DISABLE)
{
DBGMCU->CR |= DBGMCU_Periph;
}
else
{
DBGMCU->CR &= ~DBGMCU_Periph;
}
}
/**
* @brief Configures APB1 peripheral behavior when the MCU is in Debug mode.
* @param DBGMCU_Periph: specifies the APB1 peripheral.
* This parameter can be any combination of the following values:
* @arg DBGMCU_TIM2_STOP: TIM2 counter stopped when Core is halted
* @arg DBGMCU_TIM3_STOP: TIM3 counter stopped when Core is halted
* @arg DBGMCU_TIM4_STOP: TIM4 counter stopped when Core is halted
* @arg DBGMCU_TIM5_STOP: TIM5 counter stopped when Core is halted
* @arg DBGMCU_TIM6_STOP: TIM6 counter stopped when Core is halted
* @arg DBGMCU_TIM7_STOP: TIM7 counter stopped when Core is halted
* @arg DBGMCU_TIM12_STOP: TIM12 counter stopped when Core is halted
* @arg DBGMCU_TIM13_STOP: TIM13 counter stopped when Core is halted
* @arg DBGMCU_TIM14_STOP: TIM14 counter stopped when Core is halted
* @arg DBGMCU_RTC_STOP: RTC Wakeup counter stopped when Core is halted.
* @arg DBGMCU_WWDG_STOP: Debug WWDG stopped when Core is halted
* @arg DBGMCU_IWDG_STOP: Debug IWDG stopped when Core is halted
* @arg DBGMCU_I2C1_SMBUS_TIMEOUT: I2C1 SMBUS timeout mode stopped when Core is halted
* @arg DBGMCU_I2C2_SMBUS_TIMEOUT: I2C2 SMBUS timeout mode stopped when Core is halted
* @arg DBGMCU_I2C3_SMBUS_TIMEOUT: I2C3 SMBUS timeout mode stopped when Core is halted
* @arg DBGMCU_CAN2_STOP: Debug CAN1 stopped when Core is halted
* @arg DBGMCU_CAN1_STOP: Debug CAN2 stopped when Core is halted
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void DBGMCU_APB1PeriphConfig(uint32_t DBGMCU_Periph, FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_DBGMCU_APB1PERIPH(DBGMCU_Periph));
assert_param(IS_FUNCTIONAL_STATE(NewState));
if (NewState != DISABLE)
{
DBGMCU->APB1FZ |= DBGMCU_Periph;
}
else
{
DBGMCU->APB1FZ &= ~DBGMCU_Periph;
}
}
/**
* @brief Configures APB2 peripheral behavior when the MCU is in Debug mode.
* @param DBGMCU_Periph: specifies the APB2 peripheral.
* This parameter can be any combination of the following values:
* @arg DBGMCU_TIM1_STOP: TIM1 counter stopped when Core is halted
* @arg DBGMCU_TIM8_STOP: TIM8 counter stopped when Core is halted
* @arg DBGMCU_TIM9_STOP: TIM9 counter stopped when Core is halted
* @arg DBGMCU_TIM10_STOP: TIM10 counter stopped when Core is halted
* @arg DBGMCU_TIM11_STOP: TIM11 counter stopped when Core is halted
* @param NewState: new state of the specified peripheral in Debug mode.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void DBGMCU_APB2PeriphConfig(uint32_t DBGMCU_Periph, FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_DBGMCU_APB2PERIPH(DBGMCU_Periph));
assert_param(IS_FUNCTIONAL_STATE(NewState));
if (NewState != DISABLE)
{
DBGMCU->APB2FZ |= DBGMCU_Periph;
}
else
{
DBGMCU->APB2FZ &= ~DBGMCU_Periph;
}
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
@@ -1,312 +1,312 @@
/**
******************************************************************************
* @file stm32f2xx_exti.c
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file provides firmware functions to manage the following
* functionalities of the EXTI peripheral:
* - Initialization and Configuration
* - Interrupts and flags management
*
* @verbatim
*
* ===================================================================
* EXTI features
* ===================================================================
*
* External interrupt/event lines are mapped as following:
* 1- All available GPIO pins are connected to the 16 external
* interrupt/event lines from EXTI0 to EXTI15.
* 2- EXTI line 16 is connected to the PVD Output
* 3- EXTI line 17 is connected to the RTC Alarm event
* 4- EXTI line 18 is connected to the USB OTG FS Wakeup from suspend event
* 5- EXTI line 19 is connected to the Ethernet Wakeup event
* 6- EXTI line 20 is connected to the USB OTG HS (configured in FS) Wakeup event
* 7- EXTI line 21 is connected to the RTC Tamper and Time Stamp events
* 8- EXTI line 22 is connected to the RTC Wakeup event
*
* ===================================================================
* How to use this driver
* ===================================================================
*
* In order to use an I/O pin as an external interrupt source, follow
* steps below:
* 1- Configure the I/O in input mode using GPIO_Init()
* 2- Select the input source pin for the EXTI line using SYSCFG_EXTILineConfig()
* 3- Select the mode(interrupt, event) and configure the trigger
* selection (Rising, falling or both) using EXTI_Init()
* 4- Configure NVIC IRQ channel mapped to the EXTI line using NVIC_Init()
*
* @note SYSCFG APB clock must be enabled to get write access to SYSCFG_EXTICRx
* registers using RCC_APB2PeriphClockCmd(RCC_APB2Periph_SYSCFG, ENABLE);
*
* @endverbatim
*
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f2xx_exti.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @defgroup EXTI
* @brief EXTI driver modules
* @{
*/
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
#define EXTI_LINENONE ((uint32_t)0x00000) /* No interrupt selected */
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup EXTI_Private_Functions
* @{
*/
/** @defgroup EXTI_Group1 Initialization and Configuration functions
* @brief Initialization and Configuration functions
*
@verbatim
===============================================================================
Initialization and Configuration functions
===============================================================================
@endverbatim
* @{
*/
/**
* @brief Deinitializes the EXTI peripheral registers to their default reset values.
* @param None
* @retval None
*/
void EXTI_DeInit(void)
{
EXTI->IMR = 0x00000000;
EXTI->EMR = 0x00000000;
EXTI->RTSR = 0x00000000;
EXTI->FTSR = 0x00000000;
EXTI->PR = 0x007FFFFF;
}
/**
* @brief Initializes the EXTI peripheral according to the specified
* parameters in the EXTI_InitStruct.
* @param EXTI_InitStruct: pointer to a EXTI_InitTypeDef structure
* that contains the configuration information for the EXTI peripheral.
* @retval None
*/
void EXTI_Init(EXTI_InitTypeDef* EXTI_InitStruct)
{
uint32_t tmp = 0;
/* Check the parameters */
assert_param(IS_EXTI_MODE(EXTI_InitStruct->EXTI_Mode));
assert_param(IS_EXTI_TRIGGER(EXTI_InitStruct->EXTI_Trigger));
assert_param(IS_EXTI_LINE(EXTI_InitStruct->EXTI_Line));
assert_param(IS_FUNCTIONAL_STATE(EXTI_InitStruct->EXTI_LineCmd));
tmp = (uint32_t)EXTI_BASE;
if (EXTI_InitStruct->EXTI_LineCmd != DISABLE)
{
/* Clear EXTI line configuration */
EXTI->IMR &= ~EXTI_InitStruct->EXTI_Line;
EXTI->EMR &= ~EXTI_InitStruct->EXTI_Line;
tmp += EXTI_InitStruct->EXTI_Mode;
*(__IO uint32_t *) tmp |= EXTI_InitStruct->EXTI_Line;
/* Clear Rising Falling edge configuration */
EXTI->RTSR &= ~EXTI_InitStruct->EXTI_Line;
EXTI->FTSR &= ~EXTI_InitStruct->EXTI_Line;
/* Select the trigger for the selected external interrupts */
if (EXTI_InitStruct->EXTI_Trigger == EXTI_Trigger_Rising_Falling)
{
/* Rising Falling edge */
EXTI->RTSR |= EXTI_InitStruct->EXTI_Line;
EXTI->FTSR |= EXTI_InitStruct->EXTI_Line;
}
else
{
tmp = (uint32_t)EXTI_BASE;
tmp += EXTI_InitStruct->EXTI_Trigger;
*(__IO uint32_t *) tmp |= EXTI_InitStruct->EXTI_Line;
}
}
else
{
tmp += EXTI_InitStruct->EXTI_Mode;
/* Disable the selected external lines */
*(__IO uint32_t *) tmp &= ~EXTI_InitStruct->EXTI_Line;
}
}
/**
* @brief Fills each EXTI_InitStruct member with its reset value.
* @param EXTI_InitStruct: pointer to a EXTI_InitTypeDef structure which will
* be initialized.
* @retval None
*/
void EXTI_StructInit(EXTI_InitTypeDef* EXTI_InitStruct)
{
EXTI_InitStruct->EXTI_Line = EXTI_LINENONE;
EXTI_InitStruct->EXTI_Mode = EXTI_Mode_Interrupt;
EXTI_InitStruct->EXTI_Trigger = EXTI_Trigger_Falling;
EXTI_InitStruct->EXTI_LineCmd = DISABLE;
}
/**
* @brief Generates a Software interrupt on selected EXTI line.
* @param EXTI_Line: specifies the EXTI line on which the software interrupt
* will be generated.
* This parameter can be any combination of EXTI_Linex where x can be (0..22)
* @retval None
*/
void EXTI_GenerateSWInterrupt(uint32_t EXTI_Line)
{
/* Check the parameters */
assert_param(IS_EXTI_LINE(EXTI_Line));
EXTI->SWIER |= EXTI_Line;
}
/**
* @}
*/
/** @defgroup EXTI_Group2 Interrupts and flags management functions
* @brief Interrupts and flags management functions
*
@verbatim
===============================================================================
Interrupts and flags management functions
===============================================================================
@endverbatim
* @{
*/
/**
* @brief Checks whether the specified EXTI line flag is set or not.
* @param EXTI_Line: specifies the EXTI line flag to check.
* This parameter can be EXTI_Linex where x can be(0..22)
* @retval The new state of EXTI_Line (SET or RESET).
*/
FlagStatus EXTI_GetFlagStatus(uint32_t EXTI_Line)
{
FlagStatus bitstatus = RESET;
/* Check the parameters */
assert_param(IS_GET_EXTI_LINE(EXTI_Line));
if ((EXTI->PR & EXTI_Line) != (uint32_t)RESET)
{
bitstatus = SET;
}
else
{
bitstatus = RESET;
}
return bitstatus;
}
/**
* @brief Clears the EXTI's line pending flags.
* @param EXTI_Line: specifies the EXTI lines flags to clear.
* This parameter can be any combination of EXTI_Linex where x can be (0..22)
* @retval None
*/
void EXTI_ClearFlag(uint32_t EXTI_Line)
{
/* Check the parameters */
assert_param(IS_EXTI_LINE(EXTI_Line));
EXTI->PR = EXTI_Line;
}
/**
* @brief Checks whether the specified EXTI line is asserted or not.
* @param EXTI_Line: specifies the EXTI line to check.
* This parameter can be EXTI_Linex where x can be(0..22)
* @retval The new state of EXTI_Line (SET or RESET).
*/
ITStatus EXTI_GetITStatus(uint32_t EXTI_Line)
{
ITStatus bitstatus = RESET;
uint32_t enablestatus = 0;
/* Check the parameters */
assert_param(IS_GET_EXTI_LINE(EXTI_Line));
enablestatus = EXTI->IMR & EXTI_Line;
if (((EXTI->PR & EXTI_Line) != (uint32_t)RESET) && (enablestatus != (uint32_t)RESET))
{
bitstatus = SET;
}
else
{
bitstatus = RESET;
}
return bitstatus;
}
/**
* @brief Clears the EXTI's line pending bits.
* @param EXTI_Line: specifies the EXTI lines to clear.
* This parameter can be any combination of EXTI_Linex where x can be (0..22)
* @retval None
*/
void EXTI_ClearITPendingBit(uint32_t EXTI_Line)
{
/* Check the parameters */
assert_param(IS_EXTI_LINE(EXTI_Line));
EXTI->PR = EXTI_Line;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
/**
******************************************************************************
* @file stm32f2xx_exti.c
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file provides firmware functions to manage the following
* functionalities of the EXTI peripheral:
* - Initialization and Configuration
* - Interrupts and flags management
*
* @verbatim
*
* ===================================================================
* EXTI features
* ===================================================================
*
* External interrupt/event lines are mapped as following:
* 1- All available GPIO pins are connected to the 16 external
* interrupt/event lines from EXTI0 to EXTI15.
* 2- EXTI line 16 is connected to the PVD Output
* 3- EXTI line 17 is connected to the RTC Alarm event
* 4- EXTI line 18 is connected to the USB OTG FS Wakeup from suspend event
* 5- EXTI line 19 is connected to the Ethernet Wakeup event
* 6- EXTI line 20 is connected to the USB OTG HS (configured in FS) Wakeup event
* 7- EXTI line 21 is connected to the RTC Tamper and Time Stamp events
* 8- EXTI line 22 is connected to the RTC Wakeup event
*
* ===================================================================
* How to use this driver
* ===================================================================
*
* In order to use an I/O pin as an external interrupt source, follow
* steps below:
* 1- Configure the I/O in input mode using GPIO_Init()
* 2- Select the input source pin for the EXTI line using SYSCFG_EXTILineConfig()
* 3- Select the mode(interrupt, event) and configure the trigger
* selection (Rising, falling or both) using EXTI_Init()
* 4- Configure NVIC IRQ channel mapped to the EXTI line using NVIC_Init()
*
* @note SYSCFG APB clock must be enabled to get write access to SYSCFG_EXTICRx
* registers using RCC_APB2PeriphClockCmd(RCC_APB2Periph_SYSCFG, ENABLE);
*
* @endverbatim
*
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f2xx_exti.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @defgroup EXTI
* @brief EXTI driver modules
* @{
*/
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
#define EXTI_LINENONE ((uint32_t)0x00000) /* No interrupt selected */
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup EXTI_Private_Functions
* @{
*/
/** @defgroup EXTI_Group1 Initialization and Configuration functions
* @brief Initialization and Configuration functions
*
@verbatim
===============================================================================
Initialization and Configuration functions
===============================================================================
@endverbatim
* @{
*/
/**
* @brief Deinitializes the EXTI peripheral registers to their default reset values.
* @param None
* @retval None
*/
void EXTI_DeInit(void)
{
EXTI->IMR = 0x00000000;
EXTI->EMR = 0x00000000;
EXTI->RTSR = 0x00000000;
EXTI->FTSR = 0x00000000;
EXTI->PR = 0x007FFFFF;
}
/**
* @brief Initializes the EXTI peripheral according to the specified
* parameters in the EXTI_InitStruct.
* @param EXTI_InitStruct: pointer to a EXTI_InitTypeDef structure
* that contains the configuration information for the EXTI peripheral.
* @retval None
*/
void EXTI_Init(EXTI_InitTypeDef* EXTI_InitStruct)
{
uint32_t tmp = 0;
/* Check the parameters */
assert_param(IS_EXTI_MODE(EXTI_InitStruct->EXTI_Mode));
assert_param(IS_EXTI_TRIGGER(EXTI_InitStruct->EXTI_Trigger));
assert_param(IS_EXTI_LINE(EXTI_InitStruct->EXTI_Line));
assert_param(IS_FUNCTIONAL_STATE(EXTI_InitStruct->EXTI_LineCmd));
tmp = (uint32_t)EXTI_BASE;
if (EXTI_InitStruct->EXTI_LineCmd != DISABLE)
{
/* Clear EXTI line configuration */
EXTI->IMR &= ~EXTI_InitStruct->EXTI_Line;
EXTI->EMR &= ~EXTI_InitStruct->EXTI_Line;
tmp += EXTI_InitStruct->EXTI_Mode;
*(__IO uint32_t *) tmp |= EXTI_InitStruct->EXTI_Line;
/* Clear Rising Falling edge configuration */
EXTI->RTSR &= ~EXTI_InitStruct->EXTI_Line;
EXTI->FTSR &= ~EXTI_InitStruct->EXTI_Line;
/* Select the trigger for the selected external interrupts */
if (EXTI_InitStruct->EXTI_Trigger == EXTI_Trigger_Rising_Falling)
{
/* Rising Falling edge */
EXTI->RTSR |= EXTI_InitStruct->EXTI_Line;
EXTI->FTSR |= EXTI_InitStruct->EXTI_Line;
}
else
{
tmp = (uint32_t)EXTI_BASE;
tmp += EXTI_InitStruct->EXTI_Trigger;
*(__IO uint32_t *) tmp |= EXTI_InitStruct->EXTI_Line;
}
}
else
{
tmp += EXTI_InitStruct->EXTI_Mode;
/* Disable the selected external lines */
*(__IO uint32_t *) tmp &= ~EXTI_InitStruct->EXTI_Line;
}
}
/**
* @brief Fills each EXTI_InitStruct member with its reset value.
* @param EXTI_InitStruct: pointer to a EXTI_InitTypeDef structure which will
* be initialized.
* @retval None
*/
void EXTI_StructInit(EXTI_InitTypeDef* EXTI_InitStruct)
{
EXTI_InitStruct->EXTI_Line = EXTI_LINENONE;
EXTI_InitStruct->EXTI_Mode = EXTI_Mode_Interrupt;
EXTI_InitStruct->EXTI_Trigger = EXTI_Trigger_Falling;
EXTI_InitStruct->EXTI_LineCmd = DISABLE;
}
/**
* @brief Generates a Software interrupt on selected EXTI line.
* @param EXTI_Line: specifies the EXTI line on which the software interrupt
* will be generated.
* This parameter can be any combination of EXTI_Linex where x can be (0..22)
* @retval None
*/
void EXTI_GenerateSWInterrupt(uint32_t EXTI_Line)
{
/* Check the parameters */
assert_param(IS_EXTI_LINE(EXTI_Line));
EXTI->SWIER |= EXTI_Line;
}
/**
* @}
*/
/** @defgroup EXTI_Group2 Interrupts and flags management functions
* @brief Interrupts and flags management functions
*
@verbatim
===============================================================================
Interrupts and flags management functions
===============================================================================
@endverbatim
* @{
*/
/**
* @brief Checks whether the specified EXTI line flag is set or not.
* @param EXTI_Line: specifies the EXTI line flag to check.
* This parameter can be EXTI_Linex where x can be(0..22)
* @retval The new state of EXTI_Line (SET or RESET).
*/
FlagStatus EXTI_GetFlagStatus(uint32_t EXTI_Line)
{
FlagStatus bitstatus = RESET;
/* Check the parameters */
assert_param(IS_GET_EXTI_LINE(EXTI_Line));
if ((EXTI->PR & EXTI_Line) != (uint32_t)RESET)
{
bitstatus = SET;
}
else
{
bitstatus = RESET;
}
return bitstatus;
}
/**
* @brief Clears the EXTI's line pending flags.
* @param EXTI_Line: specifies the EXTI lines flags to clear.
* This parameter can be any combination of EXTI_Linex where x can be (0..22)
* @retval None
*/
void EXTI_ClearFlag(uint32_t EXTI_Line)
{
/* Check the parameters */
assert_param(IS_EXTI_LINE(EXTI_Line));
EXTI->PR = EXTI_Line;
}
/**
* @brief Checks whether the specified EXTI line is asserted or not.
* @param EXTI_Line: specifies the EXTI line to check.
* This parameter can be EXTI_Linex where x can be(0..22)
* @retval The new state of EXTI_Line (SET or RESET).
*/
ITStatus EXTI_GetITStatus(uint32_t EXTI_Line)
{
ITStatus bitstatus = RESET;
uint32_t enablestatus = 0;
/* Check the parameters */
assert_param(IS_GET_EXTI_LINE(EXTI_Line));
enablestatus = EXTI->IMR & EXTI_Line;
if (((EXTI->PR & EXTI_Line) != (uint32_t)RESET) && (enablestatus != (uint32_t)RESET))
{
bitstatus = SET;
}
else
{
bitstatus = RESET;
}
return bitstatus;
}
/**
* @brief Clears the EXTI's line pending bits.
* @param EXTI_Line: specifies the EXTI lines to clear.
* This parameter can be any combination of EXTI_Linex where x can be (0..22)
* @retval None
*/
void EXTI_ClearITPendingBit(uint32_t EXTI_Line)
{
/* Check the parameters */
assert_param(IS_EXTI_LINE(EXTI_Line));
EXTI->PR = EXTI_Line;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
@@ -1,320 +1,320 @@
/**
******************************************************************************
* @file stm32f2xx_hash_md5.c
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file provides high level functions to compute the HASH MD5 and
* HMAC MD5 Digest of an input message.
* It uses the stm32f2xx_hash.c/.h drivers to access the STM32F2xx HASH
* peripheral.
*
* @verbatim
*
* ===================================================================
* How to use this driver
* ===================================================================
* 1. Enable The HASH controller clock using
* RCC_AHB2PeriphClockCmd(RCC_AHB2Periph_HASH, ENABLE); function.
*
* 2. Calculate the HASH MD5 Digest using HASH_MD5() function.
*
* 3. Calculate the HMAC MD5 Digest using HMAC_MD5() function.
*
* @endverbatim
*
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f2xx_hash.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @defgroup HASH
* @brief HASH driver modules
* @{
*/
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
#define MD5BUSY_TIMEOUT ((uint32_t) 0x00010000)
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup HASH_Private_Functions
* @{
*/
/** @defgroup HASH_Group7 High Level MD5 functions
* @brief High Level MD5 Hash and HMAC functions
*
@verbatim
===============================================================================
High Level MD5 Hash and HMAC functions
===============================================================================
@endverbatim
* @{
*/
/**
* @brief Compute the HASH MD5 digest.
* @param Input: pointer to the Input buffer to be treated.
* @param Ilen: length of the Input buffer.
* @param Output: the returned digest
* @retval An ErrorStatus enumeration value:
* - SUCCESS: digest computation done
* - ERROR: digest computation failed
*/
ErrorStatus HASH_MD5(uint8_t *Input, uint32_t Ilen, uint8_t Output[16])
{
HASH_InitTypeDef MD5_HASH_InitStructure;
HASH_MsgDigest MD5_MessageDigest;
__IO uint16_t nbvalidbitsdata = 0;
uint32_t i = 0;
__IO uint32_t counter = 0;
uint32_t busystatus = 0;
ErrorStatus status = SUCCESS;
uint32_t inputaddr = (uint32_t)Input;
uint32_t outputaddr = (uint32_t)Output;
/* Number of valid bits in last word of the Input data */
nbvalidbitsdata = 8 * (Ilen % 4);
/* HASH peripheral initialization */
HASH_DeInit();
/* HASH Configuration */
MD5_HASH_InitStructure.HASH_AlgoSelection = HASH_AlgoSelection_MD5;
MD5_HASH_InitStructure.HASH_AlgoMode = HASH_AlgoMode_HASH;
MD5_HASH_InitStructure.HASH_DataType = HASH_DataType_8b;
HASH_Init(&MD5_HASH_InitStructure);
/* Configure the number of valid bits in last word of the data */
HASH_SetLastWordValidBitsNbr(nbvalidbitsdata);
/* Write the Input block in the IN FIFO */
for(i=0; i<Ilen; i+=4)
{
HASH_DataIn(*(uint32_t*)inputaddr);
inputaddr+=4;
}
/* Start the HASH processor */
HASH_StartDigest();
/* wait until the Busy flag is RESET */
do
{
busystatus = HASH_GetFlagStatus(HASH_FLAG_BUSY);
counter++;
}while ((counter != MD5BUSY_TIMEOUT) && (busystatus != RESET));
if (busystatus != RESET)
{
status = ERROR;
}
else
{
/* Read the message digest */
HASH_GetDigest(&MD5_MessageDigest);
*(uint32_t*)(outputaddr) = __REV(MD5_MessageDigest.Data[0]);
outputaddr+=4;
*(uint32_t*)(outputaddr) = __REV(MD5_MessageDigest.Data[1]);
outputaddr+=4;
*(uint32_t*)(outputaddr) = __REV(MD5_MessageDigest.Data[2]);
outputaddr+=4;
*(uint32_t*)(outputaddr) = __REV(MD5_MessageDigest.Data[3]);
}
return status;
}
/**
* @brief Compute the HMAC MD5 digest.
* @param Key: pointer to the Key used for HMAC.
* @param Keylen: length of the Key used for HMAC.
* @param Input: pointer to the Input buffer to be treated.
* @param Ilen: length of the Input buffer.
* @param Output: the returned digest
* @retval An ErrorStatus enumeration value:
* - SUCCESS: digest computation done
* - ERROR: digest computation failed
*/
ErrorStatus HMAC_MD5(uint8_t *Key, uint32_t Keylen, uint8_t *Input,
uint32_t Ilen, uint8_t Output[16])
{
HASH_InitTypeDef MD5_HASH_InitStructure;
HASH_MsgDigest MD5_MessageDigest;
__IO uint16_t nbvalidbitsdata = 0;
__IO uint16_t nbvalidbitskey = 0;
uint32_t i = 0;
__IO uint32_t counter = 0;
uint32_t busystatus = 0;
ErrorStatus status = SUCCESS;
uint32_t keyaddr = (uint32_t)Key;
uint32_t inputaddr = (uint32_t)Input;
uint32_t outputaddr = (uint32_t)Output;
/* Number of valid bits in last word of the Input data */
nbvalidbitsdata = 8 * (Ilen % 4);
/* Number of valid bits in last word of the Key */
nbvalidbitskey = 8 * (Keylen % 4);
/* HASH peripheral initialization */
HASH_DeInit();
/* HASH Configuration */
MD5_HASH_InitStructure.HASH_AlgoSelection = HASH_AlgoSelection_MD5;
MD5_HASH_InitStructure.HASH_AlgoMode = HASH_AlgoMode_HMAC;
MD5_HASH_InitStructure.HASH_DataType = HASH_DataType_8b;
if(Keylen > 64)
{
/* HMAC long Key */
MD5_HASH_InitStructure.HASH_HMACKeyType = HASH_HMACKeyType_LongKey;
}
else
{
/* HMAC short Key */
MD5_HASH_InitStructure.HASH_HMACKeyType = HASH_HMACKeyType_ShortKey;
}
HASH_Init(&MD5_HASH_InitStructure);
/* Configure the number of valid bits in last word of the Key */
HASH_SetLastWordValidBitsNbr(nbvalidbitskey);
/* Write the Key */
for(i=0; i<Keylen; i+=4)
{
HASH_DataIn(*(uint32_t*)keyaddr);
keyaddr+=4;
}
/* Start the HASH processor */
HASH_StartDigest();
/* wait until the Busy flag is RESET */
do
{
busystatus = HASH_GetFlagStatus(HASH_FLAG_BUSY);
counter++;
}while ((counter != MD5BUSY_TIMEOUT) && (busystatus != RESET));
if (busystatus != RESET)
{
status = ERROR;
}
else
{
/* Configure the number of valid bits in last word of the Input data */
HASH_SetLastWordValidBitsNbr(nbvalidbitsdata);
/* Write the Input block in the IN FIFO */
for(i=0; i<Ilen; i+=4)
{
HASH_DataIn(*(uint32_t*)inputaddr);
inputaddr+=4;
}
/* Start the HASH processor */
HASH_StartDigest();
/* wait until the Busy flag is RESET */
counter =0;
do
{
busystatus = HASH_GetFlagStatus(HASH_FLAG_BUSY);
counter++;
}while ((counter != MD5BUSY_TIMEOUT) && (busystatus != RESET));
if (busystatus != RESET)
{
status = ERROR;
}
else
{
/* Configure the number of valid bits in last word of the Key */
HASH_SetLastWordValidBitsNbr(nbvalidbitskey);
/* Write the Key */
keyaddr = (uint32_t)Key;
for(i=0; i<Keylen; i+=4)
{
HASH_DataIn(*(uint32_t*)keyaddr);
keyaddr+=4;
}
/* Start the HASH processor */
HASH_StartDigest();
/* wait until the Busy flag is RESET */
counter =0;
do
{
busystatus = HASH_GetFlagStatus(HASH_FLAG_BUSY);
counter++;
}while ((counter != MD5BUSY_TIMEOUT) && (busystatus != RESET));
if (busystatus != RESET)
{
status = ERROR;
}
else
{
/* Read the message digest */
HASH_GetDigest(&MD5_MessageDigest);
*(uint32_t*)(outputaddr) = __REV(MD5_MessageDigest.Data[0]);
outputaddr+=4;
*(uint32_t*)(outputaddr) = __REV(MD5_MessageDigest.Data[1]);
outputaddr+=4;
*(uint32_t*)(outputaddr) = __REV(MD5_MessageDigest.Data[2]);
outputaddr+=4;
*(uint32_t*)(outputaddr) = __REV(MD5_MessageDigest.Data[3]);
}
}
}
return status;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
/**
******************************************************************************
* @file stm32f2xx_hash_md5.c
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file provides high level functions to compute the HASH MD5 and
* HMAC MD5 Digest of an input message.
* It uses the stm32f2xx_hash.c/.h drivers to access the STM32F2xx HASH
* peripheral.
*
* @verbatim
*
* ===================================================================
* How to use this driver
* ===================================================================
* 1. Enable The HASH controller clock using
* RCC_AHB2PeriphClockCmd(RCC_AHB2Periph_HASH, ENABLE); function.
*
* 2. Calculate the HASH MD5 Digest using HASH_MD5() function.
*
* 3. Calculate the HMAC MD5 Digest using HMAC_MD5() function.
*
* @endverbatim
*
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f2xx_hash.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @defgroup HASH
* @brief HASH driver modules
* @{
*/
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
#define MD5BUSY_TIMEOUT ((uint32_t) 0x00010000)
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup HASH_Private_Functions
* @{
*/
/** @defgroup HASH_Group7 High Level MD5 functions
* @brief High Level MD5 Hash and HMAC functions
*
@verbatim
===============================================================================
High Level MD5 Hash and HMAC functions
===============================================================================
@endverbatim
* @{
*/
/**
* @brief Compute the HASH MD5 digest.
* @param Input: pointer to the Input buffer to be treated.
* @param Ilen: length of the Input buffer.
* @param Output: the returned digest
* @retval An ErrorStatus enumeration value:
* - SUCCESS: digest computation done
* - ERROR: digest computation failed
*/
ErrorStatus HASH_MD5(uint8_t *Input, uint32_t Ilen, uint8_t Output[16])
{
HASH_InitTypeDef MD5_HASH_InitStructure;
HASH_MsgDigest MD5_MessageDigest;
__IO uint16_t nbvalidbitsdata = 0;
uint32_t i = 0;
__IO uint32_t counter = 0;
uint32_t busystatus = 0;
ErrorStatus status = SUCCESS;
uint32_t inputaddr = (uint32_t)Input;
uint32_t outputaddr = (uint32_t)Output;
/* Number of valid bits in last word of the Input data */
nbvalidbitsdata = 8 * (Ilen % 4);
/* HASH peripheral initialization */
HASH_DeInit();
/* HASH Configuration */
MD5_HASH_InitStructure.HASH_AlgoSelection = HASH_AlgoSelection_MD5;
MD5_HASH_InitStructure.HASH_AlgoMode = HASH_AlgoMode_HASH;
MD5_HASH_InitStructure.HASH_DataType = HASH_DataType_8b;
HASH_Init(&MD5_HASH_InitStructure);
/* Configure the number of valid bits in last word of the data */
HASH_SetLastWordValidBitsNbr(nbvalidbitsdata);
/* Write the Input block in the IN FIFO */
for(i=0; i<Ilen; i+=4)
{
HASH_DataIn(*(uint32_t*)inputaddr);
inputaddr+=4;
}
/* Start the HASH processor */
HASH_StartDigest();
/* wait until the Busy flag is RESET */
do
{
busystatus = HASH_GetFlagStatus(HASH_FLAG_BUSY);
counter++;
}while ((counter != MD5BUSY_TIMEOUT) && (busystatus != RESET));
if (busystatus != RESET)
{
status = ERROR;
}
else
{
/* Read the message digest */
HASH_GetDigest(&MD5_MessageDigest);
*(uint32_t*)(outputaddr) = __REV(MD5_MessageDigest.Data[0]);
outputaddr+=4;
*(uint32_t*)(outputaddr) = __REV(MD5_MessageDigest.Data[1]);
outputaddr+=4;
*(uint32_t*)(outputaddr) = __REV(MD5_MessageDigest.Data[2]);
outputaddr+=4;
*(uint32_t*)(outputaddr) = __REV(MD5_MessageDigest.Data[3]);
}
return status;
}
/**
* @brief Compute the HMAC MD5 digest.
* @param Key: pointer to the Key used for HMAC.
* @param Keylen: length of the Key used for HMAC.
* @param Input: pointer to the Input buffer to be treated.
* @param Ilen: length of the Input buffer.
* @param Output: the returned digest
* @retval An ErrorStatus enumeration value:
* - SUCCESS: digest computation done
* - ERROR: digest computation failed
*/
ErrorStatus HMAC_MD5(uint8_t *Key, uint32_t Keylen, uint8_t *Input,
uint32_t Ilen, uint8_t Output[16])
{
HASH_InitTypeDef MD5_HASH_InitStructure;
HASH_MsgDigest MD5_MessageDigest;
__IO uint16_t nbvalidbitsdata = 0;
__IO uint16_t nbvalidbitskey = 0;
uint32_t i = 0;
__IO uint32_t counter = 0;
uint32_t busystatus = 0;
ErrorStatus status = SUCCESS;
uint32_t keyaddr = (uint32_t)Key;
uint32_t inputaddr = (uint32_t)Input;
uint32_t outputaddr = (uint32_t)Output;
/* Number of valid bits in last word of the Input data */
nbvalidbitsdata = 8 * (Ilen % 4);
/* Number of valid bits in last word of the Key */
nbvalidbitskey = 8 * (Keylen % 4);
/* HASH peripheral initialization */
HASH_DeInit();
/* HASH Configuration */
MD5_HASH_InitStructure.HASH_AlgoSelection = HASH_AlgoSelection_MD5;
MD5_HASH_InitStructure.HASH_AlgoMode = HASH_AlgoMode_HMAC;
MD5_HASH_InitStructure.HASH_DataType = HASH_DataType_8b;
if(Keylen > 64)
{
/* HMAC long Key */
MD5_HASH_InitStructure.HASH_HMACKeyType = HASH_HMACKeyType_LongKey;
}
else
{
/* HMAC short Key */
MD5_HASH_InitStructure.HASH_HMACKeyType = HASH_HMACKeyType_ShortKey;
}
HASH_Init(&MD5_HASH_InitStructure);
/* Configure the number of valid bits in last word of the Key */
HASH_SetLastWordValidBitsNbr(nbvalidbitskey);
/* Write the Key */
for(i=0; i<Keylen; i+=4)
{
HASH_DataIn(*(uint32_t*)keyaddr);
keyaddr+=4;
}
/* Start the HASH processor */
HASH_StartDigest();
/* wait until the Busy flag is RESET */
do
{
busystatus = HASH_GetFlagStatus(HASH_FLAG_BUSY);
counter++;
}while ((counter != MD5BUSY_TIMEOUT) && (busystatus != RESET));
if (busystatus != RESET)
{
status = ERROR;
}
else
{
/* Configure the number of valid bits in last word of the Input data */
HASH_SetLastWordValidBitsNbr(nbvalidbitsdata);
/* Write the Input block in the IN FIFO */
for(i=0; i<Ilen; i+=4)
{
HASH_DataIn(*(uint32_t*)inputaddr);
inputaddr+=4;
}
/* Start the HASH processor */
HASH_StartDigest();
/* wait until the Busy flag is RESET */
counter =0;
do
{
busystatus = HASH_GetFlagStatus(HASH_FLAG_BUSY);
counter++;
}while ((counter != MD5BUSY_TIMEOUT) && (busystatus != RESET));
if (busystatus != RESET)
{
status = ERROR;
}
else
{
/* Configure the number of valid bits in last word of the Key */
HASH_SetLastWordValidBitsNbr(nbvalidbitskey);
/* Write the Key */
keyaddr = (uint32_t)Key;
for(i=0; i<Keylen; i+=4)
{
HASH_DataIn(*(uint32_t*)keyaddr);
keyaddr+=4;
}
/* Start the HASH processor */
HASH_StartDigest();
/* wait until the Busy flag is RESET */
counter =0;
do
{
busystatus = HASH_GetFlagStatus(HASH_FLAG_BUSY);
counter++;
}while ((counter != MD5BUSY_TIMEOUT) && (busystatus != RESET));
if (busystatus != RESET)
{
status = ERROR;
}
else
{
/* Read the message digest */
HASH_GetDigest(&MD5_MessageDigest);
*(uint32_t*)(outputaddr) = __REV(MD5_MessageDigest.Data[0]);
outputaddr+=4;
*(uint32_t*)(outputaddr) = __REV(MD5_MessageDigest.Data[1]);
outputaddr+=4;
*(uint32_t*)(outputaddr) = __REV(MD5_MessageDigest.Data[2]);
outputaddr+=4;
*(uint32_t*)(outputaddr) = __REV(MD5_MessageDigest.Data[3]);
}
}
}
return status;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
@@ -1,323 +1,323 @@
/**
******************************************************************************
* @file stm32f2xx_hash_sha1.c
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file provides high level functions to compute the HASH SHA1 and
* HMAC SHA1 Digest of an input message.
* It uses the stm32f2xx_hash.c/.h drivers to access the STM32F2xx HASH
* peripheral.
*
* @verbatim
*
* ===================================================================
* How to use this driver
* ===================================================================
* 1. Enable The HASH controller clock using
* RCC_AHB2PeriphClockCmd(RCC_AHB2Periph_HASH, ENABLE); function.
*
* 2. Calculate the HASH SHA1 Digest using HASH_SHA1() function.
*
* 3. Calculate the HMAC SHA1 Digest using HMAC_SHA1() function.
*
* @endverbatim
*
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f2xx_hash.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @defgroup HASH
* @brief HASH driver modules
* @{
*/
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
#define SHA1BUSY_TIMEOUT ((uint32_t) 0x00010000)
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup HASH_Private_Functions
* @{
*/
/** @defgroup HASH_Group6 High Level SHA1 functions
* @brief High Level SHA1 Hash and HMAC functions
*
@verbatim
===============================================================================
High Level SHA1 Hash and HMAC functions
===============================================================================
@endverbatim
* @{
*/
/**
* @brief Compute the HASH SHA1 digest.
* @param Input: pointer to the Input buffer to be treated.
* @param Ilen: length of the Input buffer.
* @param Output: the returned digest
* @retval An ErrorStatus enumeration value:
* - SUCCESS: digest computation done
* - ERROR: digest computation failed
*/
ErrorStatus HASH_SHA1(uint8_t *Input, uint32_t Ilen, uint8_t Output[20])
{
HASH_InitTypeDef SHA1_HASH_InitStructure;
HASH_MsgDigest SHA1_MessageDigest;
__IO uint16_t nbvalidbitsdata = 0;
uint32_t i = 0;
__IO uint32_t counter = 0;
uint32_t busystatus = 0;
ErrorStatus status = SUCCESS;
uint32_t inputaddr = (uint32_t)Input;
uint32_t outputaddr = (uint32_t)Output;
/* Number of valid bits in last word of the Input data */
nbvalidbitsdata = 8 * (Ilen % 4);
/* HASH peripheral initialization */
HASH_DeInit();
/* HASH Configuration */
SHA1_HASH_InitStructure.HASH_AlgoSelection = HASH_AlgoSelection_SHA1;
SHA1_HASH_InitStructure.HASH_AlgoMode = HASH_AlgoMode_HASH;
SHA1_HASH_InitStructure.HASH_DataType = HASH_DataType_8b;
HASH_Init(&SHA1_HASH_InitStructure);
/* Configure the number of valid bits in last word of the data */
HASH_SetLastWordValidBitsNbr(nbvalidbitsdata);
/* Write the Input block in the IN FIFO */
for(i=0; i<Ilen; i+=4)
{
HASH_DataIn(*(uint32_t*)inputaddr);
inputaddr+=4;
}
/* Start the HASH processor */
HASH_StartDigest();
/* wait until the Busy flag is RESET */
do
{
busystatus = HASH_GetFlagStatus(HASH_FLAG_BUSY);
counter++;
}while ((counter != SHA1BUSY_TIMEOUT) && (busystatus != RESET));
if (busystatus != RESET)
{
status = ERROR;
}
else
{
/* Read the message digest */
HASH_GetDigest(&SHA1_MessageDigest);
*(uint32_t*)(outputaddr) = __REV(SHA1_MessageDigest.Data[0]);
outputaddr+=4;
*(uint32_t*)(outputaddr) = __REV(SHA1_MessageDigest.Data[1]);
outputaddr+=4;
*(uint32_t*)(outputaddr) = __REV(SHA1_MessageDigest.Data[2]);
outputaddr+=4;
*(uint32_t*)(outputaddr) = __REV(SHA1_MessageDigest.Data[3]);
outputaddr+=4;
*(uint32_t*)(outputaddr) = __REV(SHA1_MessageDigest.Data[4]);
}
return status;
}
/**
* @brief Compute the HMAC SHA1 digest.
* @param Key: pointer to the Key used for HMAC.
* @param Keylen: length of the Key used for HMAC.
* @param Input: pointer to the Input buffer to be treated.
* @param Ilen: length of the Input buffer.
* @param Output: the returned digest
* @retval An ErrorStatus enumeration value:
* - SUCCESS: digest computation done
* - ERROR: digest computation failed
*/
ErrorStatus HMAC_SHA1(uint8_t *Key, uint32_t Keylen, uint8_t *Input,
uint32_t Ilen, uint8_t Output[20])
{
HASH_InitTypeDef SHA1_HASH_InitStructure;
HASH_MsgDigest SHA1_MessageDigest;
__IO uint16_t nbvalidbitsdata = 0;
__IO uint16_t nbvalidbitskey = 0;
uint32_t i = 0;
__IO uint32_t counter = 0;
uint32_t busystatus = 0;
ErrorStatus status = SUCCESS;
uint32_t keyaddr = (uint32_t)Key;
uint32_t inputaddr = (uint32_t)Input;
uint32_t outputaddr = (uint32_t)Output;
/* Number of valid bits in last word of the Input data */
nbvalidbitsdata = 8 * (Ilen % 4);
/* Number of valid bits in last word of the Key */
nbvalidbitskey = 8 * (Keylen % 4);
/* HASH peripheral initialization */
HASH_DeInit();
/* HASH Configuration */
SHA1_HASH_InitStructure.HASH_AlgoSelection = HASH_AlgoSelection_SHA1;
SHA1_HASH_InitStructure.HASH_AlgoMode = HASH_AlgoMode_HMAC;
SHA1_HASH_InitStructure.HASH_DataType = HASH_DataType_8b;
if(Keylen > 64)
{
/* HMAC long Key */
SHA1_HASH_InitStructure.HASH_HMACKeyType = HASH_HMACKeyType_LongKey;
}
else
{
/* HMAC short Key */
SHA1_HASH_InitStructure.HASH_HMACKeyType = HASH_HMACKeyType_ShortKey;
}
HASH_Init(&SHA1_HASH_InitStructure);
/* Configure the number of valid bits in last word of the Key */
HASH_SetLastWordValidBitsNbr(nbvalidbitskey);
/* Write the Key */
for(i=0; i<Keylen; i+=4)
{
HASH_DataIn(*(uint32_t*)keyaddr);
keyaddr+=4;
}
/* Start the HASH processor */
HASH_StartDigest();
/* wait until the Busy flag is RESET */
do
{
busystatus = HASH_GetFlagStatus(HASH_FLAG_BUSY);
counter++;
}while ((counter != SHA1BUSY_TIMEOUT) && (busystatus != RESET));
if (busystatus != RESET)
{
status = ERROR;
}
else
{
/* Configure the number of valid bits in last word of the Input data */
HASH_SetLastWordValidBitsNbr(nbvalidbitsdata);
/* Write the Input block in the IN FIFO */
for(i=0; i<Ilen; i+=4)
{
HASH_DataIn(*(uint32_t*)inputaddr);
inputaddr+=4;
}
/* Start the HASH processor */
HASH_StartDigest();
/* wait until the Busy flag is RESET */
counter =0;
do
{
busystatus = HASH_GetFlagStatus(HASH_FLAG_BUSY);
counter++;
}while ((counter != SHA1BUSY_TIMEOUT) && (busystatus != RESET));
if (busystatus != RESET)
{
status = ERROR;
}
else
{
/* Configure the number of valid bits in last word of the Key */
HASH_SetLastWordValidBitsNbr(nbvalidbitskey);
/* Write the Key */
keyaddr = (uint32_t)Key;
for(i=0; i<Keylen; i+=4)
{
HASH_DataIn(*(uint32_t*)keyaddr);
keyaddr+=4;
}
/* Start the HASH processor */
HASH_StartDigest();
/* wait until the Busy flag is RESET */
counter =0;
do
{
busystatus = HASH_GetFlagStatus(HASH_FLAG_BUSY);
counter++;
}while ((counter != SHA1BUSY_TIMEOUT) && (busystatus != RESET));
if (busystatus != RESET)
{
status = ERROR;
}
else
{
/* Read the message digest */
HASH_GetDigest(&SHA1_MessageDigest);
*(uint32_t*)(outputaddr) = __REV(SHA1_MessageDigest.Data[0]);
outputaddr+=4;
*(uint32_t*)(outputaddr) = __REV(SHA1_MessageDigest.Data[1]);
outputaddr+=4;
*(uint32_t*)(outputaddr) = __REV(SHA1_MessageDigest.Data[2]);
outputaddr+=4;
*(uint32_t*)(outputaddr) = __REV(SHA1_MessageDigest.Data[3]);
outputaddr+=4;
*(uint32_t*)(outputaddr) = __REV(SHA1_MessageDigest.Data[4]);
}
}
}
return status;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
/**
******************************************************************************
* @file stm32f2xx_hash_sha1.c
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file provides high level functions to compute the HASH SHA1 and
* HMAC SHA1 Digest of an input message.
* It uses the stm32f2xx_hash.c/.h drivers to access the STM32F2xx HASH
* peripheral.
*
* @verbatim
*
* ===================================================================
* How to use this driver
* ===================================================================
* 1. Enable The HASH controller clock using
* RCC_AHB2PeriphClockCmd(RCC_AHB2Periph_HASH, ENABLE); function.
*
* 2. Calculate the HASH SHA1 Digest using HASH_SHA1() function.
*
* 3. Calculate the HMAC SHA1 Digest using HMAC_SHA1() function.
*
* @endverbatim
*
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f2xx_hash.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @defgroup HASH
* @brief HASH driver modules
* @{
*/
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
#define SHA1BUSY_TIMEOUT ((uint32_t) 0x00010000)
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup HASH_Private_Functions
* @{
*/
/** @defgroup HASH_Group6 High Level SHA1 functions
* @brief High Level SHA1 Hash and HMAC functions
*
@verbatim
===============================================================================
High Level SHA1 Hash and HMAC functions
===============================================================================
@endverbatim
* @{
*/
/**
* @brief Compute the HASH SHA1 digest.
* @param Input: pointer to the Input buffer to be treated.
* @param Ilen: length of the Input buffer.
* @param Output: the returned digest
* @retval An ErrorStatus enumeration value:
* - SUCCESS: digest computation done
* - ERROR: digest computation failed
*/
ErrorStatus HASH_SHA1(uint8_t *Input, uint32_t Ilen, uint8_t Output[20])
{
HASH_InitTypeDef SHA1_HASH_InitStructure;
HASH_MsgDigest SHA1_MessageDigest;
__IO uint16_t nbvalidbitsdata = 0;
uint32_t i = 0;
__IO uint32_t counter = 0;
uint32_t busystatus = 0;
ErrorStatus status = SUCCESS;
uint32_t inputaddr = (uint32_t)Input;
uint32_t outputaddr = (uint32_t)Output;
/* Number of valid bits in last word of the Input data */
nbvalidbitsdata = 8 * (Ilen % 4);
/* HASH peripheral initialization */
HASH_DeInit();
/* HASH Configuration */
SHA1_HASH_InitStructure.HASH_AlgoSelection = HASH_AlgoSelection_SHA1;
SHA1_HASH_InitStructure.HASH_AlgoMode = HASH_AlgoMode_HASH;
SHA1_HASH_InitStructure.HASH_DataType = HASH_DataType_8b;
HASH_Init(&SHA1_HASH_InitStructure);
/* Configure the number of valid bits in last word of the data */
HASH_SetLastWordValidBitsNbr(nbvalidbitsdata);
/* Write the Input block in the IN FIFO */
for(i=0; i<Ilen; i+=4)
{
HASH_DataIn(*(uint32_t*)inputaddr);
inputaddr+=4;
}
/* Start the HASH processor */
HASH_StartDigest();
/* wait until the Busy flag is RESET */
do
{
busystatus = HASH_GetFlagStatus(HASH_FLAG_BUSY);
counter++;
}while ((counter != SHA1BUSY_TIMEOUT) && (busystatus != RESET));
if (busystatus != RESET)
{
status = ERROR;
}
else
{
/* Read the message digest */
HASH_GetDigest(&SHA1_MessageDigest);
*(uint32_t*)(outputaddr) = __REV(SHA1_MessageDigest.Data[0]);
outputaddr+=4;
*(uint32_t*)(outputaddr) = __REV(SHA1_MessageDigest.Data[1]);
outputaddr+=4;
*(uint32_t*)(outputaddr) = __REV(SHA1_MessageDigest.Data[2]);
outputaddr+=4;
*(uint32_t*)(outputaddr) = __REV(SHA1_MessageDigest.Data[3]);
outputaddr+=4;
*(uint32_t*)(outputaddr) = __REV(SHA1_MessageDigest.Data[4]);
}
return status;
}
/**
* @brief Compute the HMAC SHA1 digest.
* @param Key: pointer to the Key used for HMAC.
* @param Keylen: length of the Key used for HMAC.
* @param Input: pointer to the Input buffer to be treated.
* @param Ilen: length of the Input buffer.
* @param Output: the returned digest
* @retval An ErrorStatus enumeration value:
* - SUCCESS: digest computation done
* - ERROR: digest computation failed
*/
ErrorStatus HMAC_SHA1(uint8_t *Key, uint32_t Keylen, uint8_t *Input,
uint32_t Ilen, uint8_t Output[20])
{
HASH_InitTypeDef SHA1_HASH_InitStructure;
HASH_MsgDigest SHA1_MessageDigest;
__IO uint16_t nbvalidbitsdata = 0;
__IO uint16_t nbvalidbitskey = 0;
uint32_t i = 0;
__IO uint32_t counter = 0;
uint32_t busystatus = 0;
ErrorStatus status = SUCCESS;
uint32_t keyaddr = (uint32_t)Key;
uint32_t inputaddr = (uint32_t)Input;
uint32_t outputaddr = (uint32_t)Output;
/* Number of valid bits in last word of the Input data */
nbvalidbitsdata = 8 * (Ilen % 4);
/* Number of valid bits in last word of the Key */
nbvalidbitskey = 8 * (Keylen % 4);
/* HASH peripheral initialization */
HASH_DeInit();
/* HASH Configuration */
SHA1_HASH_InitStructure.HASH_AlgoSelection = HASH_AlgoSelection_SHA1;
SHA1_HASH_InitStructure.HASH_AlgoMode = HASH_AlgoMode_HMAC;
SHA1_HASH_InitStructure.HASH_DataType = HASH_DataType_8b;
if(Keylen > 64)
{
/* HMAC long Key */
SHA1_HASH_InitStructure.HASH_HMACKeyType = HASH_HMACKeyType_LongKey;
}
else
{
/* HMAC short Key */
SHA1_HASH_InitStructure.HASH_HMACKeyType = HASH_HMACKeyType_ShortKey;
}
HASH_Init(&SHA1_HASH_InitStructure);
/* Configure the number of valid bits in last word of the Key */
HASH_SetLastWordValidBitsNbr(nbvalidbitskey);
/* Write the Key */
for(i=0; i<Keylen; i+=4)
{
HASH_DataIn(*(uint32_t*)keyaddr);
keyaddr+=4;
}
/* Start the HASH processor */
HASH_StartDigest();
/* wait until the Busy flag is RESET */
do
{
busystatus = HASH_GetFlagStatus(HASH_FLAG_BUSY);
counter++;
}while ((counter != SHA1BUSY_TIMEOUT) && (busystatus != RESET));
if (busystatus != RESET)
{
status = ERROR;
}
else
{
/* Configure the number of valid bits in last word of the Input data */
HASH_SetLastWordValidBitsNbr(nbvalidbitsdata);
/* Write the Input block in the IN FIFO */
for(i=0; i<Ilen; i+=4)
{
HASH_DataIn(*(uint32_t*)inputaddr);
inputaddr+=4;
}
/* Start the HASH processor */
HASH_StartDigest();
/* wait until the Busy flag is RESET */
counter =0;
do
{
busystatus = HASH_GetFlagStatus(HASH_FLAG_BUSY);
counter++;
}while ((counter != SHA1BUSY_TIMEOUT) && (busystatus != RESET));
if (busystatus != RESET)
{
status = ERROR;
}
else
{
/* Configure the number of valid bits in last word of the Key */
HASH_SetLastWordValidBitsNbr(nbvalidbitskey);
/* Write the Key */
keyaddr = (uint32_t)Key;
for(i=0; i<Keylen; i+=4)
{
HASH_DataIn(*(uint32_t*)keyaddr);
keyaddr+=4;
}
/* Start the HASH processor */
HASH_StartDigest();
/* wait until the Busy flag is RESET */
counter =0;
do
{
busystatus = HASH_GetFlagStatus(HASH_FLAG_BUSY);
counter++;
}while ((counter != SHA1BUSY_TIMEOUT) && (busystatus != RESET));
if (busystatus != RESET)
{
status = ERROR;
}
else
{
/* Read the message digest */
HASH_GetDigest(&SHA1_MessageDigest);
*(uint32_t*)(outputaddr) = __REV(SHA1_MessageDigest.Data[0]);
outputaddr+=4;
*(uint32_t*)(outputaddr) = __REV(SHA1_MessageDigest.Data[1]);
outputaddr+=4;
*(uint32_t*)(outputaddr) = __REV(SHA1_MessageDigest.Data[2]);
outputaddr+=4;
*(uint32_t*)(outputaddr) = __REV(SHA1_MessageDigest.Data[3]);
outputaddr+=4;
*(uint32_t*)(outputaddr) = __REV(SHA1_MessageDigest.Data[4]);
}
}
}
return status;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
@@ -1,269 +1,269 @@
/**
******************************************************************************
* @file stm32f2xx_iwdg.c
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file provides firmware functions to manage the following
* functionalities of the Independent watchdog (IWDG) peripheral:
* - Prescaler and Counter configuration
* - IWDG activation
* - Flag management
*
* @verbatim
*
* ===================================================================
* IWDG features
* ===================================================================
*
* The IWDG can be started by either software or hardware (configurable
* through option byte).
*
* The IWDG is clocked by its own dedicated low-speed clock (LSI) and
* thus stays active even if the main clock fails.
* Once the IWDG is started, the LSI is forced ON and cannot be disabled
* (LSI cannot be disabled too), and the counter starts counting down from
* the reset value of 0xFFF. When it reaches the end of count value (0x000)
* a system reset is generated.
* The IWDG counter should be reloaded at regular intervals to prevent
* an MCU reset.
*
* The IWDG is implemented in the VDD voltage domain that is still functional
* in STOP and STANDBY mode (IWDG reset can wake-up from STANDBY).
*
* IWDGRST flag in RCC_CSR register can be used to inform when a IWDG
* reset occurs.
*
* Min-max timeout value @32KHz (LSI): ~125us / ~32.7s
* The IWDG timeout may vary due to LSI frequency dispersion. STM32F2xx
* devices provide the capability to measure the LSI frequency (LSI clock
* connected internally to TIM5 CH4 input capture). The measured value
* can be used to have an IWDG timeout with an acceptable accuracy.
* For more information, please refer to the STM32F2xx Reference manual
*
*
* ===================================================================
* How to use this driver
* ===================================================================
* 1. Enable write access to IWDG_PR and IWDG_RLR registers using
* IWDG_WriteAccessCmd(IWDG_WriteAccess_Enable) function
*
* 2. Configure the IWDG prescaler using IWDG_SetPrescaler() function
*
* 3. Configure the IWDG counter value using IWDG_SetReload() function.
* This value will be loaded in the IWDG counter each time the counter
* is reloaded, then the IWDG will start counting down from this value.
*
* 4. Start the IWDG using IWDG_Enable() function, when the IWDG is used
* in software mode (no need to enable the LSI, it will be enabled
* by hardware)
*
* 5. Then the application program must reload the IWDG counter at regular
* intervals during normal operation to prevent an MCU reset, using
* IWDG_ReloadCounter() function.
*
* @endverbatim
*
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f2xx_iwdg.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @defgroup IWDG
* @brief IWDG driver modules
* @{
*/
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* KR register bit mask */
#define KR_KEY_RELOAD ((uint16_t)0xAAAA)
#define KR_KEY_ENABLE ((uint16_t)0xCCCC)
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup IWDG_Private_Functions
* @{
*/
/** @defgroup IWDG_Group1 Prescaler and Counter configuration functions
* @brief Prescaler and Counter configuration functions
*
@verbatim
===============================================================================
Prescaler and Counter configuration functions
===============================================================================
@endverbatim
* @{
*/
/**
* @brief Enables or disables write access to IWDG_PR and IWDG_RLR registers.
* @param IWDG_WriteAccess: new state of write access to IWDG_PR and IWDG_RLR registers.
* This parameter can be one of the following values:
* @arg IWDG_WriteAccess_Enable: Enable write access to IWDG_PR and IWDG_RLR registers
* @arg IWDG_WriteAccess_Disable: Disable write access to IWDG_PR and IWDG_RLR registers
* @retval None
*/
void IWDG_WriteAccessCmd(uint16_t IWDG_WriteAccess)
{
/* Check the parameters */
assert_param(IS_IWDG_WRITE_ACCESS(IWDG_WriteAccess));
IWDG->KR = IWDG_WriteAccess;
}
/**
* @brief Sets IWDG Prescaler value.
* @param IWDG_Prescaler: specifies the IWDG Prescaler value.
* This parameter can be one of the following values:
* @arg IWDG_Prescaler_4: IWDG prescaler set to 4
* @arg IWDG_Prescaler_8: IWDG prescaler set to 8
* @arg IWDG_Prescaler_16: IWDG prescaler set to 16
* @arg IWDG_Prescaler_32: IWDG prescaler set to 32
* @arg IWDG_Prescaler_64: IWDG prescaler set to 64
* @arg IWDG_Prescaler_128: IWDG prescaler set to 128
* @arg IWDG_Prescaler_256: IWDG prescaler set to 256
* @retval None
*/
void IWDG_SetPrescaler(uint8_t IWDG_Prescaler)
{
/* Check the parameters */
assert_param(IS_IWDG_PRESCALER(IWDG_Prescaler));
IWDG->PR = IWDG_Prescaler;
}
/**
* @brief Sets IWDG Reload value.
* @param Reload: specifies the IWDG Reload value.
* This parameter must be a number between 0 and 0x0FFF.
* @retval None
*/
void IWDG_SetReload(uint16_t Reload)
{
/* Check the parameters */
assert_param(IS_IWDG_RELOAD(Reload));
IWDG->RLR = Reload;
}
/**
* @brief Reloads IWDG counter with value defined in the reload register
* (write access to IWDG_PR and IWDG_RLR registers disabled).
* @param None
* @retval None
*/
void IWDG_ReloadCounter(void)
{
IWDG->KR = KR_KEY_RELOAD;
}
/**
* @}
*/
/** @defgroup IWDG_Group2 IWDG activation function
* @brief IWDG activation function
*
@verbatim
===============================================================================
IWDG activation function
===============================================================================
@endverbatim
* @{
*/
/**
* @brief Enables IWDG (write access to IWDG_PR and IWDG_RLR registers disabled).
* @param None
* @retval None
*/
void IWDG_Enable(void)
{
IWDG->KR = KR_KEY_ENABLE;
}
/**
* @}
*/
/** @defgroup IWDG_Group3 Flag management function
* @brief Flag management function
*
@verbatim
===============================================================================
Flag management function
===============================================================================
@endverbatim
* @{
*/
/**
* @brief Checks whether the specified IWDG flag is set or not.
* @param IWDG_FLAG: specifies the flag to check.
* This parameter can be one of the following values:
* @arg IWDG_FLAG_PVU: Prescaler Value Update on going
* @arg IWDG_FLAG_RVU: Reload Value Update on going
* @retval The new state of IWDG_FLAG (SET or RESET).
*/
FlagStatus IWDG_GetFlagStatus(uint16_t IWDG_FLAG)
{
FlagStatus bitstatus = RESET;
/* Check the parameters */
assert_param(IS_IWDG_FLAG(IWDG_FLAG));
if ((IWDG->SR & IWDG_FLAG) != (uint32_t)RESET)
{
bitstatus = SET;
}
else
{
bitstatus = RESET;
}
/* Return the flag status */
return bitstatus;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
/**
******************************************************************************
* @file stm32f2xx_iwdg.c
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file provides firmware functions to manage the following
* functionalities of the Independent watchdog (IWDG) peripheral:
* - Prescaler and Counter configuration
* - IWDG activation
* - Flag management
*
* @verbatim
*
* ===================================================================
* IWDG features
* ===================================================================
*
* The IWDG can be started by either software or hardware (configurable
* through option byte).
*
* The IWDG is clocked by its own dedicated low-speed clock (LSI) and
* thus stays active even if the main clock fails.
* Once the IWDG is started, the LSI is forced ON and cannot be disabled
* (LSI cannot be disabled too), and the counter starts counting down from
* the reset value of 0xFFF. When it reaches the end of count value (0x000)
* a system reset is generated.
* The IWDG counter should be reloaded at regular intervals to prevent
* an MCU reset.
*
* The IWDG is implemented in the VDD voltage domain that is still functional
* in STOP and STANDBY mode (IWDG reset can wake-up from STANDBY).
*
* IWDGRST flag in RCC_CSR register can be used to inform when a IWDG
* reset occurs.
*
* Min-max timeout value @32KHz (LSI): ~125us / ~32.7s
* The IWDG timeout may vary due to LSI frequency dispersion. STM32F2xx
* devices provide the capability to measure the LSI frequency (LSI clock
* connected internally to TIM5 CH4 input capture). The measured value
* can be used to have an IWDG timeout with an acceptable accuracy.
* For more information, please refer to the STM32F2xx Reference manual
*
*
* ===================================================================
* How to use this driver
* ===================================================================
* 1. Enable write access to IWDG_PR and IWDG_RLR registers using
* IWDG_WriteAccessCmd(IWDG_WriteAccess_Enable) function
*
* 2. Configure the IWDG prescaler using IWDG_SetPrescaler() function
*
* 3. Configure the IWDG counter value using IWDG_SetReload() function.
* This value will be loaded in the IWDG counter each time the counter
* is reloaded, then the IWDG will start counting down from this value.
*
* 4. Start the IWDG using IWDG_Enable() function, when the IWDG is used
* in software mode (no need to enable the LSI, it will be enabled
* by hardware)
*
* 5. Then the application program must reload the IWDG counter at regular
* intervals during normal operation to prevent an MCU reset, using
* IWDG_ReloadCounter() function.
*
* @endverbatim
*
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f2xx_iwdg.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @defgroup IWDG
* @brief IWDG driver modules
* @{
*/
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* KR register bit mask */
#define KR_KEY_RELOAD ((uint16_t)0xAAAA)
#define KR_KEY_ENABLE ((uint16_t)0xCCCC)
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup IWDG_Private_Functions
* @{
*/
/** @defgroup IWDG_Group1 Prescaler and Counter configuration functions
* @brief Prescaler and Counter configuration functions
*
@verbatim
===============================================================================
Prescaler and Counter configuration functions
===============================================================================
@endverbatim
* @{
*/
/**
* @brief Enables or disables write access to IWDG_PR and IWDG_RLR registers.
* @param IWDG_WriteAccess: new state of write access to IWDG_PR and IWDG_RLR registers.
* This parameter can be one of the following values:
* @arg IWDG_WriteAccess_Enable: Enable write access to IWDG_PR and IWDG_RLR registers
* @arg IWDG_WriteAccess_Disable: Disable write access to IWDG_PR and IWDG_RLR registers
* @retval None
*/
void IWDG_WriteAccessCmd(uint16_t IWDG_WriteAccess)
{
/* Check the parameters */
assert_param(IS_IWDG_WRITE_ACCESS(IWDG_WriteAccess));
IWDG->KR = IWDG_WriteAccess;
}
/**
* @brief Sets IWDG Prescaler value.
* @param IWDG_Prescaler: specifies the IWDG Prescaler value.
* This parameter can be one of the following values:
* @arg IWDG_Prescaler_4: IWDG prescaler set to 4
* @arg IWDG_Prescaler_8: IWDG prescaler set to 8
* @arg IWDG_Prescaler_16: IWDG prescaler set to 16
* @arg IWDG_Prescaler_32: IWDG prescaler set to 32
* @arg IWDG_Prescaler_64: IWDG prescaler set to 64
* @arg IWDG_Prescaler_128: IWDG prescaler set to 128
* @arg IWDG_Prescaler_256: IWDG prescaler set to 256
* @retval None
*/
void IWDG_SetPrescaler(uint8_t IWDG_Prescaler)
{
/* Check the parameters */
assert_param(IS_IWDG_PRESCALER(IWDG_Prescaler));
IWDG->PR = IWDG_Prescaler;
}
/**
* @brief Sets IWDG Reload value.
* @param Reload: specifies the IWDG Reload value.
* This parameter must be a number between 0 and 0x0FFF.
* @retval None
*/
void IWDG_SetReload(uint16_t Reload)
{
/* Check the parameters */
assert_param(IS_IWDG_RELOAD(Reload));
IWDG->RLR = Reload;
}
/**
* @brief Reloads IWDG counter with value defined in the reload register
* (write access to IWDG_PR and IWDG_RLR registers disabled).
* @param None
* @retval None
*/
void IWDG_ReloadCounter(void)
{
IWDG->KR = KR_KEY_RELOAD;
}
/**
* @}
*/
/** @defgroup IWDG_Group2 IWDG activation function
* @brief IWDG activation function
*
@verbatim
===============================================================================
IWDG activation function
===============================================================================
@endverbatim
* @{
*/
/**
* @brief Enables IWDG (write access to IWDG_PR and IWDG_RLR registers disabled).
* @param None
* @retval None
*/
void IWDG_Enable(void)
{
IWDG->KR = KR_KEY_ENABLE;
}
/**
* @}
*/
/** @defgroup IWDG_Group3 Flag management function
* @brief Flag management function
*
@verbatim
===============================================================================
Flag management function
===============================================================================
@endverbatim
* @{
*/
/**
* @brief Checks whether the specified IWDG flag is set or not.
* @param IWDG_FLAG: specifies the flag to check.
* This parameter can be one of the following values:
* @arg IWDG_FLAG_PVU: Prescaler Value Update on going
* @arg IWDG_FLAG_RVU: Reload Value Update on going
* @retval The new state of IWDG_FLAG (SET or RESET).
*/
FlagStatus IWDG_GetFlagStatus(uint16_t IWDG_FLAG)
{
FlagStatus bitstatus = RESET;
/* Check the parameters */
assert_param(IS_IWDG_FLAG(IWDG_FLAG));
if ((IWDG->SR & IWDG_FLAG) != (uint32_t)RESET)
{
bitstatus = SET;
}
else
{
bitstatus = RESET;
}
/* Return the flag status */
return bitstatus;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
@@ -1,405 +1,405 @@
/**
******************************************************************************
* @file stm32f2xx_rng.c
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file provides firmware functions to manage the following
* functionalities of the Random Number Generator (RNG) peripheral:
* - Initialization and Configuration
* - Get 32 bit Random number
* - Interrupts and flags management
*
* @verbatim
*
* ===================================================================
* How to use this driver
* ===================================================================
* 1. Enable The RNG controller clock using
* RCC_AHB2PeriphClockCmd(RCC_AHB2Periph_RNG, ENABLE) function.
*
* 2. Activate the RNG peripheral using RNG_Cmd() function.
*
* 3. Wait until the 32 bit Random number Generator contains a valid
* random data (using polling/interrupt mode). For more details,
* refer to "Interrupts and flags management functions" module
* description.
*
* 4. Get the 32 bit Random number using RNG_GetRandomNumber() function
*
* 5. To get another 32 bit Random number, go to step 3.
*
*
*
* @endverbatim
*
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f2xx_rng.h"
#include "stm32f2xx_rcc.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @defgroup RNG
* @brief RNG driver modules
* @{
*/
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup RNG_Private_Functions
* @{
*/
/** @defgroup RNG_Group1 Initialization and Configuration functions
* @brief Initialization and Configuration functions
*
@verbatim
===============================================================================
Initialization and Configuration functions
===============================================================================
This section provides functions allowing to
- Initialize the RNG peripheral
- Enable or disable the RNG peripheral
@endverbatim
* @{
*/
/**
* @brief Deinitializes the RNG peripheral registers to their default reset values.
* @param None
* @retval None
*/
void RNG_DeInit(void)
{
/* Enable RNG reset state */
RCC_AHB2PeriphResetCmd(RCC_AHB2Periph_RNG, ENABLE);
/* Release RNG from reset state */
RCC_AHB2PeriphResetCmd(RCC_AHB2Periph_RNG, DISABLE);
}
/**
* @brief Enables or disables the RNG peripheral.
* @param NewState: new state of the RNG peripheral.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void RNG_Cmd(FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_FUNCTIONAL_STATE(NewState));
if (NewState != DISABLE)
{
/* Enable the RNG */
RNG->CR |= RNG_CR_RNGEN;
}
else
{
/* Disable the RNG */
RNG->CR &= ~RNG_CR_RNGEN;
}
}
/**
* @}
*/
/** @defgroup RNG_Group2 Get 32 bit Random number function
* @brief Get 32 bit Random number function
*
@verbatim
===============================================================================
Get 32 bit Random number function
===============================================================================
This section provides a function allowing to get the 32 bit Random number
@note Before to call this function you have to wait till DRDY flag is set,
using RNG_GetFlagStatus(RNG_FLAG_DRDY) function.
@endverbatim
* @{
*/
/**
* @brief Returns a 32-bit random number.
*
* @note Before to call this function you have to wait till DRDY (data ready)
* flag is set, using RNG_GetFlagStatus(RNG_FLAG_DRDY) function.
* @note Each time the the Random number data is read (using RNG_GetRandomNumber()
* function), the RNG_FLAG_DRDY flag is automatically cleared.
* @note In the case of a seed error, the generation of random numbers is
* interrupted for as long as the SECS bit is '1'. If a number is
* available in the RNG_DR register, it must not be used because it may
* not have enough entropy. In this case, it is recommended to clear the
* SEIS bit(using RNG_ClearFlag(RNG_FLAG_SECS) function), then disable
* and enable the RNG peripheral (using RNG_Cmd() function) to
* reinitialize and restart the RNG.
* @note In the case of a clock error, the RNG is no more able to generate
* random numbers because the PLL48CLK clock is not correct. User have
* to check that the clock controller is correctly configured to provide
* the RNG clock and clear the CEIS bit (using RNG_ClearFlag(RNG_FLAG_CECS)
* function) . The clock error has no impact on the previously generated
* random numbers, and the RNG_DR register contents can be used.
*
* @param None
* @retval 32-bit random number.
*/
uint32_t RNG_GetRandomNumber(void)
{
/* Return the 32 bit random number from the DR register */
return RNG->DR;
}
/**
* @}
*/
/** @defgroup RNG_Group3 Interrupts and flags management functions
* @brief Interrupts and flags management functions
*
@verbatim
===============================================================================
Interrupts and flags management functions
===============================================================================
This section provides functions allowing to configure the RNG Interrupts and
to get the status and clear flags and Interrupts pending bits.
The RNG provides 3 Interrupts sources and 3 Flags:
Flags :
----------
1. RNG_FLAG_DRDY : In the case of the RNG_DR register contains valid
random data. it is cleared by reading the valid data
(using RNG_GetRandomNumber() function).
2. RNG_FLAG_CECS : In the case of a seed error detection.
3. RNG_FLAG_SECS : In the case of a clock error detection.
Interrupts :
------------
if enabled, an RNG interrupt is pending :
1. In the case of the RNG_DR register contains valid random data.
This interrupt source is cleared once the RNG_DR register has been read
(using RNG_GetRandomNumber() function) until a new valid value is
computed.
or
2. In the case of a seed error : One of the following faulty sequences has
been detected:
- More than 64 consecutive bits at the same value (0 or 1)
- More than 32 consecutive alternance of 0 and 1 (0101010101...01)
This interrupt source is cleared using RNG_ClearITPendingBit(RNG_IT_SEI)
function.
or
3. In the case of a clock error : the PLL48CLK (RNG peripheral clock source)
was not correctly detected (fPLL48CLK< fHCLK/16).
This interrupt source is cleared using RNG_ClearITPendingBit(RNG_IT_CEI)
function.
@note In this case, User have to check that the clock controller is
correctly configured to provide the RNG clock.
Managing the RNG controller events :
------------------------------------
The user should identify which mode will be used in his application to manage
the RNG controller events: Polling mode or Interrupt mode.
1. In the Polling Mode it is advised to use the following functions:
- RNG_GetFlagStatus() : to check if flags events occur.
- RNG_ClearFlag() : to clear the flags events.
@note RNG_FLAG_DRDY can not be cleared by RNG_ClearFlag(). it is cleared only
by reading the Random number data.
2. In the Interrupt Mode it is advised to use the following functions:
- RNG_ITConfig() : to enable or disable the interrupt source.
- RNG_GetITStatus() : to check if Interrupt occurs.
- RNG_ClearITPendingBit() : to clear the Interrupt pending Bit
(corresponding Flag).
@endverbatim
* @{
*/
/**
* @brief Enables or disables the RNG interrupt.
* @note The RNG provides 3 interrupt sources,
* - Computed data is ready event (DRDY), and
* - Seed error Interrupt (SEI) and
* - Clock error Interrupt (CEI),
* all these interrupts sources are enabled by setting the IE bit in
* CR register. However, each interrupt have its specific status bit
* (see RNG_GetITStatus() function) and clear bit except the DRDY event
* (see RNG_ClearITPendingBit() function).
* @param NewState: new state of the RNG interrupt.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void RNG_ITConfig(FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_FUNCTIONAL_STATE(NewState));
if (NewState != DISABLE)
{
/* Enable the RNG interrupt */
RNG->CR |= RNG_CR_IE;
}
else
{
/* Disable the RNG interrupt */
RNG->CR &= ~RNG_CR_IE;
}
}
/**
* @brief Checks whether the specified RNG flag is set or not.
* @param RNG_FLAG: specifies the RNG flag to check.
* This parameter can be one of the following values:
* @arg RNG_FLAG_DRDY: Data Ready flag.
* @arg RNG_FLAG_CECS: Clock Error Current flag.
* @arg RNG_FLAG_SECS: Seed Error Current flag.
* @retval The new state of RNG_FLAG (SET or RESET).
*/
FlagStatus RNG_GetFlagStatus(uint8_t RNG_FLAG)
{
FlagStatus bitstatus = RESET;
/* Check the parameters */
assert_param(IS_RNG_GET_FLAG(RNG_FLAG));
/* Check the status of the specified RNG flag */
if ((RNG->SR & RNG_FLAG) != (uint8_t)RESET)
{
/* RNG_FLAG is set */
bitstatus = SET;
}
else
{
/* RNG_FLAG is reset */
bitstatus = RESET;
}
/* Return the RNG_FLAG status */
return bitstatus;
}
/**
* @brief Clears the RNG flags.
* @param RNG_FLAG: specifies the flag to clear.
* This parameter can be any combination of the following values:
* @arg RNG_FLAG_CECS: Clock Error Current flag.
* @arg RNG_FLAG_SECS: Seed Error Current flag.
* @note RNG_FLAG_DRDY can not be cleared by RNG_ClearFlag() function.
* This flag is cleared only by reading the Random number data (using
* RNG_GetRandomNumber() function).
* @retval None
*/
void RNG_ClearFlag(uint8_t RNG_FLAG)
{
/* Check the parameters */
assert_param(IS_RNG_CLEAR_FLAG(RNG_FLAG));
/* Clear the selected RNG flags */
RNG->SR = ~(uint32_t)(((uint32_t)RNG_FLAG) << 4);
}
/**
* @brief Checks whether the specified RNG interrupt has occurred or not.
* @param RNG_IT: specifies the RNG interrupt source to check.
* This parameter can be one of the following values:
* @arg RNG_IT_CEI: Clock Error Interrupt.
* @arg RNG_IT_SEI: Seed Error Interrupt.
* @retval The new state of RNG_IT (SET or RESET).
*/
ITStatus RNG_GetITStatus(uint8_t RNG_IT)
{
ITStatus bitstatus = RESET;
/* Check the parameters */
assert_param(IS_RNG_GET_IT(RNG_IT));
/* Check the status of the specified RNG interrupt */
if ((RNG->SR & RNG_IT) != (uint8_t)RESET)
{
/* RNG_IT is set */
bitstatus = SET;
}
else
{
/* RNG_IT is reset */
bitstatus = RESET;
}
/* Return the RNG_IT status */
return bitstatus;
}
/**
* @brief Clears the RNG interrupt pending bit(s).
* @param RNG_IT: specifies the RNG interrupt pending bit(s) to clear.
* This parameter can be any combination of the following values:
* @arg RNG_IT_CEI: Clock Error Interrupt.
* @arg RNG_IT_SEI: Seed Error Interrupt.
* @retval None
*/
void RNG_ClearITPendingBit(uint8_t RNG_IT)
{
/* Check the parameters */
assert_param(IS_RNG_IT(RNG_IT));
/* Clear the selected RNG interrupt pending bit */
RNG->SR = (uint8_t)~RNG_IT;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
/**
******************************************************************************
* @file stm32f2xx_rng.c
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file provides firmware functions to manage the following
* functionalities of the Random Number Generator (RNG) peripheral:
* - Initialization and Configuration
* - Get 32 bit Random number
* - Interrupts and flags management
*
* @verbatim
*
* ===================================================================
* How to use this driver
* ===================================================================
* 1. Enable The RNG controller clock using
* RCC_AHB2PeriphClockCmd(RCC_AHB2Periph_RNG, ENABLE) function.
*
* 2. Activate the RNG peripheral using RNG_Cmd() function.
*
* 3. Wait until the 32 bit Random number Generator contains a valid
* random data (using polling/interrupt mode). For more details,
* refer to "Interrupts and flags management functions" module
* description.
*
* 4. Get the 32 bit Random number using RNG_GetRandomNumber() function
*
* 5. To get another 32 bit Random number, go to step 3.
*
*
*
* @endverbatim
*
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f2xx_rng.h"
#include "stm32f2xx_rcc.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @defgroup RNG
* @brief RNG driver modules
* @{
*/
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup RNG_Private_Functions
* @{
*/
/** @defgroup RNG_Group1 Initialization and Configuration functions
* @brief Initialization and Configuration functions
*
@verbatim
===============================================================================
Initialization and Configuration functions
===============================================================================
This section provides functions allowing to
- Initialize the RNG peripheral
- Enable or disable the RNG peripheral
@endverbatim
* @{
*/
/**
* @brief Deinitializes the RNG peripheral registers to their default reset values.
* @param None
* @retval None
*/
void RNG_DeInit(void)
{
/* Enable RNG reset state */
RCC_AHB2PeriphResetCmd(RCC_AHB2Periph_RNG, ENABLE);
/* Release RNG from reset state */
RCC_AHB2PeriphResetCmd(RCC_AHB2Periph_RNG, DISABLE);
}
/**
* @brief Enables or disables the RNG peripheral.
* @param NewState: new state of the RNG peripheral.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void RNG_Cmd(FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_FUNCTIONAL_STATE(NewState));
if (NewState != DISABLE)
{
/* Enable the RNG */
RNG->CR |= RNG_CR_RNGEN;
}
else
{
/* Disable the RNG */
RNG->CR &= ~RNG_CR_RNGEN;
}
}
/**
* @}
*/
/** @defgroup RNG_Group2 Get 32 bit Random number function
* @brief Get 32 bit Random number function
*
@verbatim
===============================================================================
Get 32 bit Random number function
===============================================================================
This section provides a function allowing to get the 32 bit Random number
@note Before to call this function you have to wait till DRDY flag is set,
using RNG_GetFlagStatus(RNG_FLAG_DRDY) function.
@endverbatim
* @{
*/
/**
* @brief Returns a 32-bit random number.
*
* @note Before to call this function you have to wait till DRDY (data ready)
* flag is set, using RNG_GetFlagStatus(RNG_FLAG_DRDY) function.
* @note Each time the the Random number data is read (using RNG_GetRandomNumber()
* function), the RNG_FLAG_DRDY flag is automatically cleared.
* @note In the case of a seed error, the generation of random numbers is
* interrupted for as long as the SECS bit is '1'. If a number is
* available in the RNG_DR register, it must not be used because it may
* not have enough entropy. In this case, it is recommended to clear the
* SEIS bit(using RNG_ClearFlag(RNG_FLAG_SECS) function), then disable
* and enable the RNG peripheral (using RNG_Cmd() function) to
* reinitialize and restart the RNG.
* @note In the case of a clock error, the RNG is no more able to generate
* random numbers because the PLL48CLK clock is not correct. User have
* to check that the clock controller is correctly configured to provide
* the RNG clock and clear the CEIS bit (using RNG_ClearFlag(RNG_FLAG_CECS)
* function) . The clock error has no impact on the previously generated
* random numbers, and the RNG_DR register contents can be used.
*
* @param None
* @retval 32-bit random number.
*/
uint32_t RNG_GetRandomNumber(void)
{
/* Return the 32 bit random number from the DR register */
return RNG->DR;
}
/**
* @}
*/
/** @defgroup RNG_Group3 Interrupts and flags management functions
* @brief Interrupts and flags management functions
*
@verbatim
===============================================================================
Interrupts and flags management functions
===============================================================================
This section provides functions allowing to configure the RNG Interrupts and
to get the status and clear flags and Interrupts pending bits.
The RNG provides 3 Interrupts sources and 3 Flags:
Flags :
----------
1. RNG_FLAG_DRDY : In the case of the RNG_DR register contains valid
random data. it is cleared by reading the valid data
(using RNG_GetRandomNumber() function).
2. RNG_FLAG_CECS : In the case of a seed error detection.
3. RNG_FLAG_SECS : In the case of a clock error detection.
Interrupts :
------------
if enabled, an RNG interrupt is pending :
1. In the case of the RNG_DR register contains valid random data.
This interrupt source is cleared once the RNG_DR register has been read
(using RNG_GetRandomNumber() function) until a new valid value is
computed.
or
2. In the case of a seed error : One of the following faulty sequences has
been detected:
- More than 64 consecutive bits at the same value (0 or 1)
- More than 32 consecutive alternance of 0 and 1 (0101010101...01)
This interrupt source is cleared using RNG_ClearITPendingBit(RNG_IT_SEI)
function.
or
3. In the case of a clock error : the PLL48CLK (RNG peripheral clock source)
was not correctly detected (fPLL48CLK< fHCLK/16).
This interrupt source is cleared using RNG_ClearITPendingBit(RNG_IT_CEI)
function.
@note In this case, User have to check that the clock controller is
correctly configured to provide the RNG clock.
Managing the RNG controller events :
------------------------------------
The user should identify which mode will be used in his application to manage
the RNG controller events: Polling mode or Interrupt mode.
1. In the Polling Mode it is advised to use the following functions:
- RNG_GetFlagStatus() : to check if flags events occur.
- RNG_ClearFlag() : to clear the flags events.
@note RNG_FLAG_DRDY can not be cleared by RNG_ClearFlag(). it is cleared only
by reading the Random number data.
2. In the Interrupt Mode it is advised to use the following functions:
- RNG_ITConfig() : to enable or disable the interrupt source.
- RNG_GetITStatus() : to check if Interrupt occurs.
- RNG_ClearITPendingBit() : to clear the Interrupt pending Bit
(corresponding Flag).
@endverbatim
* @{
*/
/**
* @brief Enables or disables the RNG interrupt.
* @note The RNG provides 3 interrupt sources,
* - Computed data is ready event (DRDY), and
* - Seed error Interrupt (SEI) and
* - Clock error Interrupt (CEI),
* all these interrupts sources are enabled by setting the IE bit in
* CR register. However, each interrupt have its specific status bit
* (see RNG_GetITStatus() function) and clear bit except the DRDY event
* (see RNG_ClearITPendingBit() function).
* @param NewState: new state of the RNG interrupt.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void RNG_ITConfig(FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_FUNCTIONAL_STATE(NewState));
if (NewState != DISABLE)
{
/* Enable the RNG interrupt */
RNG->CR |= RNG_CR_IE;
}
else
{
/* Disable the RNG interrupt */
RNG->CR &= ~RNG_CR_IE;
}
}
/**
* @brief Checks whether the specified RNG flag is set or not.
* @param RNG_FLAG: specifies the RNG flag to check.
* This parameter can be one of the following values:
* @arg RNG_FLAG_DRDY: Data Ready flag.
* @arg RNG_FLAG_CECS: Clock Error Current flag.
* @arg RNG_FLAG_SECS: Seed Error Current flag.
* @retval The new state of RNG_FLAG (SET or RESET).
*/
FlagStatus RNG_GetFlagStatus(uint8_t RNG_FLAG)
{
FlagStatus bitstatus = RESET;
/* Check the parameters */
assert_param(IS_RNG_GET_FLAG(RNG_FLAG));
/* Check the status of the specified RNG flag */
if ((RNG->SR & RNG_FLAG) != (uint8_t)RESET)
{
/* RNG_FLAG is set */
bitstatus = SET;
}
else
{
/* RNG_FLAG is reset */
bitstatus = RESET;
}
/* Return the RNG_FLAG status */
return bitstatus;
}
/**
* @brief Clears the RNG flags.
* @param RNG_FLAG: specifies the flag to clear.
* This parameter can be any combination of the following values:
* @arg RNG_FLAG_CECS: Clock Error Current flag.
* @arg RNG_FLAG_SECS: Seed Error Current flag.
* @note RNG_FLAG_DRDY can not be cleared by RNG_ClearFlag() function.
* This flag is cleared only by reading the Random number data (using
* RNG_GetRandomNumber() function).
* @retval None
*/
void RNG_ClearFlag(uint8_t RNG_FLAG)
{
/* Check the parameters */
assert_param(IS_RNG_CLEAR_FLAG(RNG_FLAG));
/* Clear the selected RNG flags */
RNG->SR = ~(uint32_t)(((uint32_t)RNG_FLAG) << 4);
}
/**
* @brief Checks whether the specified RNG interrupt has occurred or not.
* @param RNG_IT: specifies the RNG interrupt source to check.
* This parameter can be one of the following values:
* @arg RNG_IT_CEI: Clock Error Interrupt.
* @arg RNG_IT_SEI: Seed Error Interrupt.
* @retval The new state of RNG_IT (SET or RESET).
*/
ITStatus RNG_GetITStatus(uint8_t RNG_IT)
{
ITStatus bitstatus = RESET;
/* Check the parameters */
assert_param(IS_RNG_GET_IT(RNG_IT));
/* Check the status of the specified RNG interrupt */
if ((RNG->SR & RNG_IT) != (uint8_t)RESET)
{
/* RNG_IT is set */
bitstatus = SET;
}
else
{
/* RNG_IT is reset */
bitstatus = RESET;
}
/* Return the RNG_IT status */
return bitstatus;
}
/**
* @brief Clears the RNG interrupt pending bit(s).
* @param RNG_IT: specifies the RNG interrupt pending bit(s) to clear.
* This parameter can be any combination of the following values:
* @arg RNG_IT_CEI: Clock Error Interrupt.
* @arg RNG_IT_SEI: Seed Error Interrupt.
* @retval None
*/
void RNG_ClearITPendingBit(uint8_t RNG_IT)
{
/* Check the parameters */
assert_param(IS_RNG_IT(RNG_IT));
/* Clear the selected RNG interrupt pending bit */
RNG->SR = (uint8_t)~RNG_IT;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
@@ -1,210 +1,210 @@
/**
******************************************************************************
* @file stm32f2xx_syscfg.c
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file provides firmware functions to manage the SYSCFG peripheral.
*
* @verbatim
*
* ===================================================================
* How to use this driver
* ===================================================================
*
* This driver provides functions for:
*
* 1. Remapping the memory accessible in the code area using SYSCFG_MemoryRemapConfig()
*
* 2. Manage the EXTI lines connection to the GPIOs using SYSCFG_EXTILineConfig()
*
* 3. Select the ETHERNET media interface (RMII/RII) using SYSCFG_ETH_MediaInterfaceConfig()
*
* @note SYSCFG APB clock must be enabled to get write access to SYSCFG registers,
* using RCC_APB2PeriphClockCmd(RCC_APB2Periph_SYSCFG, ENABLE);
*
* @endverbatim
*
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f2xx_syscfg.h"
#include "stm32f2xx_rcc.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @defgroup SYSCFG
* @brief SYSCFG driver modules
* @{
*/
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* ------------ RCC registers bit address in the alias region ----------- */
#define SYSCFG_OFFSET (SYSCFG_BASE - PERIPH_BASE)
/* --- PMC Register ---*/
/* Alias word address of MII_RMII_SEL bit */
#define PMC_OFFSET (SYSCFG_OFFSET + 0x04)
#define MII_RMII_SEL_BitNumber ((uint8_t)0x17)
#define PMC_MII_RMII_SEL_BB (PERIPH_BB_BASE + (PMC_OFFSET * 32) + (MII_RMII_SEL_BitNumber * 4))
/* --- CMPCR Register ---*/
/* Alias word address of CMP_PD bit */
#define CMPCR_OFFSET (SYSCFG_OFFSET + 0x20)
#define CMP_PD_BitNumber ((uint8_t)0x00)
#define CMPCR_CMP_PD_BB (PERIPH_BB_BASE + (CMPCR_OFFSET * 32) + (CMP_PD_BitNumber * 4))
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup SYSCFG_Private_Functions
* @{
*/
/**
* @brief Deinitializes the Alternate Functions (remap and EXTI configuration)
* registers to their default reset values.
* @param None
* @retval None
*/
void SYSCFG_DeInit(void)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_SYSCFG, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_SYSCFG, DISABLE);
}
/**
* @brief Changes the mapping of the specified pin.
* @param SYSCFG_Memory: selects the memory remapping.
* This parameter can be one of the following values:
* @arg SYSCFG_MemoryRemap_Flash: Main Flash memory mapped at 0x00000000
* @arg SYSCFG_MemoryRemap_SystemFlash: System Flash memory mapped at 0x00000000
* @arg SYSCFG_MemoryRemap_FSMC: FSMC (Bank1 (NOR/PSRAM 1 and 2) mapped at 0x00000000
* @arg SYSCFG_MemoryRemap_SRAM: Embedded SRAM (112kB) mapped at 0x00000000
*
* @note In remap mode, the FSMC addressing is fixed to the remap address area only
* (Bank1 NOR/PSRAM 1 and NOR/PSRAM 2) and FSMC control registers are not
* accessible. The FSMC remap function must be disabled to allows addressing
* other memory devices through the FSMC and/or to access FSMC control
* registers.
*
* @retval None
*/
void SYSCFG_MemoryRemapConfig(uint8_t SYSCFG_MemoryRemap)
{
/* Check the parameters */
assert_param(IS_SYSCFG_MEMORY_REMAP_CONFING(SYSCFG_MemoryRemap));
SYSCFG->MEMRMP = SYSCFG_MemoryRemap;
}
/**
* @brief Selects the GPIO pin used as EXTI Line.
* @param EXTI_PortSourceGPIOx : selects the GPIO port to be used as source for
* EXTI lines where x can be (A..I).
* @param EXTI_PinSourcex: specifies the EXTI line to be configured.
* This parameter can be EXTI_PinSourcex where x can be (0..15, except
* for EXTI_PortSourceGPIOI x can be (0..11).
* @retval None
*/
void SYSCFG_EXTILineConfig(uint8_t EXTI_PortSourceGPIOx, uint8_t EXTI_PinSourcex)
{
uint32_t tmp = 0x00;
/* Check the parameters */
assert_param(IS_EXTI_PORT_SOURCE(EXTI_PortSourceGPIOx));
assert_param(IS_EXTI_PIN_SOURCE(EXTI_PinSourcex));
tmp = ((uint32_t)0x0F) << (0x04 * (EXTI_PinSourcex & (uint8_t)0x03));
SYSCFG->EXTICR[EXTI_PinSourcex >> 0x02] &= ~tmp;
SYSCFG->EXTICR[EXTI_PinSourcex >> 0x02] |= (((uint32_t)EXTI_PortSourceGPIOx) << (0x04 * (EXTI_PinSourcex & (uint8_t)0x03)));
}
/**
* @brief Selects the ETHERNET media interface
* @param SYSCFG_ETH_MediaInterface: specifies the Media Interface mode.
* This parameter can be one of the following values:
* @arg SYSCFG_ETH_MediaInterface_MII: MII mode selected
* @arg SYSCFG_ETH_MediaInterface_RMII: RMII mode selected
* @retval None
*/
void SYSCFG_ETH_MediaInterfaceConfig(uint32_t SYSCFG_ETH_MediaInterface)
{
assert_param(IS_SYSCFG_ETH_MEDIA_INTERFACE(SYSCFG_ETH_MediaInterface));
/* Configure MII_RMII selection bit */
*(__IO uint32_t *) PMC_MII_RMII_SEL_BB = SYSCFG_ETH_MediaInterface;
}
/**
* @brief Enables or disables the I/O Compensation Cell.
* @note The I/O compensation cell can be used only when the device supply
* voltage ranges from 2.4 to 3.6 V.
* @param NewState: new state of the I/O Compensation Cell.
* This parameter can be one of the following values:
* @arg ENABLE: I/O compensation cell enabled
* @arg DISABLE: I/O compensation cell power-down mode
* @retval None
*/
void SYSCFG_CompensationCellCmd(FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_FUNCTIONAL_STATE(NewState));
*(__IO uint32_t *) CMPCR_CMP_PD_BB = (uint32_t)NewState;
}
/**
* @brief Checks whether the I/O Compensation Cell ready flag is set or not.
* @param None
* @retval The new state of the I/O Compensation Cell ready flag (SET or RESET)
*/
FlagStatus SYSCFG_GetCompensationCellStatus(void)
{
FlagStatus bitstatus = RESET;
if ((SYSCFG->CMPCR & SYSCFG_CMPCR_READY ) != (uint32_t)RESET)
{
bitstatus = SET;
}
else
{
bitstatus = RESET;
}
return bitstatus;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
/**
******************************************************************************
* @file stm32f2xx_syscfg.c
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file provides firmware functions to manage the SYSCFG peripheral.
*
* @verbatim
*
* ===================================================================
* How to use this driver
* ===================================================================
*
* This driver provides functions for:
*
* 1. Remapping the memory accessible in the code area using SYSCFG_MemoryRemapConfig()
*
* 2. Manage the EXTI lines connection to the GPIOs using SYSCFG_EXTILineConfig()
*
* 3. Select the ETHERNET media interface (RMII/RII) using SYSCFG_ETH_MediaInterfaceConfig()
*
* @note SYSCFG APB clock must be enabled to get write access to SYSCFG registers,
* using RCC_APB2PeriphClockCmd(RCC_APB2Periph_SYSCFG, ENABLE);
*
* @endverbatim
*
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f2xx_syscfg.h"
#include "stm32f2xx_rcc.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @defgroup SYSCFG
* @brief SYSCFG driver modules
* @{
*/
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* ------------ RCC registers bit address in the alias region ----------- */
#define SYSCFG_OFFSET (SYSCFG_BASE - PERIPH_BASE)
/* --- PMC Register ---*/
/* Alias word address of MII_RMII_SEL bit */
#define PMC_OFFSET (SYSCFG_OFFSET + 0x04)
#define MII_RMII_SEL_BitNumber ((uint8_t)0x17)
#define PMC_MII_RMII_SEL_BB (PERIPH_BB_BASE + (PMC_OFFSET * 32) + (MII_RMII_SEL_BitNumber * 4))
/* --- CMPCR Register ---*/
/* Alias word address of CMP_PD bit */
#define CMPCR_OFFSET (SYSCFG_OFFSET + 0x20)
#define CMP_PD_BitNumber ((uint8_t)0x00)
#define CMPCR_CMP_PD_BB (PERIPH_BB_BASE + (CMPCR_OFFSET * 32) + (CMP_PD_BitNumber * 4))
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup SYSCFG_Private_Functions
* @{
*/
/**
* @brief Deinitializes the Alternate Functions (remap and EXTI configuration)
* registers to their default reset values.
* @param None
* @retval None
*/
void SYSCFG_DeInit(void)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_SYSCFG, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_SYSCFG, DISABLE);
}
/**
* @brief Changes the mapping of the specified pin.
* @param SYSCFG_Memory: selects the memory remapping.
* This parameter can be one of the following values:
* @arg SYSCFG_MemoryRemap_Flash: Main Flash memory mapped at 0x00000000
* @arg SYSCFG_MemoryRemap_SystemFlash: System Flash memory mapped at 0x00000000
* @arg SYSCFG_MemoryRemap_FSMC: FSMC (Bank1 (NOR/PSRAM 1 and 2) mapped at 0x00000000
* @arg SYSCFG_MemoryRemap_SRAM: Embedded SRAM (112kB) mapped at 0x00000000
*
* @note In remap mode, the FSMC addressing is fixed to the remap address area only
* (Bank1 NOR/PSRAM 1 and NOR/PSRAM 2) and FSMC control registers are not
* accessible. The FSMC remap function must be disabled to allows addressing
* other memory devices through the FSMC and/or to access FSMC control
* registers.
*
* @retval None
*/
void SYSCFG_MemoryRemapConfig(uint8_t SYSCFG_MemoryRemap)
{
/* Check the parameters */
assert_param(IS_SYSCFG_MEMORY_REMAP_CONFING(SYSCFG_MemoryRemap));
SYSCFG->MEMRMP = SYSCFG_MemoryRemap;
}
/**
* @brief Selects the GPIO pin used as EXTI Line.
* @param EXTI_PortSourceGPIOx : selects the GPIO port to be used as source for
* EXTI lines where x can be (A..I).
* @param EXTI_PinSourcex: specifies the EXTI line to be configured.
* This parameter can be EXTI_PinSourcex where x can be (0..15, except
* for EXTI_PortSourceGPIOI x can be (0..11).
* @retval None
*/
void SYSCFG_EXTILineConfig(uint8_t EXTI_PortSourceGPIOx, uint8_t EXTI_PinSourcex)
{
uint32_t tmp = 0x00;
/* Check the parameters */
assert_param(IS_EXTI_PORT_SOURCE(EXTI_PortSourceGPIOx));
assert_param(IS_EXTI_PIN_SOURCE(EXTI_PinSourcex));
tmp = ((uint32_t)0x0F) << (0x04 * (EXTI_PinSourcex & (uint8_t)0x03));
SYSCFG->EXTICR[EXTI_PinSourcex >> 0x02] &= ~tmp;
SYSCFG->EXTICR[EXTI_PinSourcex >> 0x02] |= (((uint32_t)EXTI_PortSourceGPIOx) << (0x04 * (EXTI_PinSourcex & (uint8_t)0x03)));
}
/**
* @brief Selects the ETHERNET media interface
* @param SYSCFG_ETH_MediaInterface: specifies the Media Interface mode.
* This parameter can be one of the following values:
* @arg SYSCFG_ETH_MediaInterface_MII: MII mode selected
* @arg SYSCFG_ETH_MediaInterface_RMII: RMII mode selected
* @retval None
*/
void SYSCFG_ETH_MediaInterfaceConfig(uint32_t SYSCFG_ETH_MediaInterface)
{
assert_param(IS_SYSCFG_ETH_MEDIA_INTERFACE(SYSCFG_ETH_MediaInterface));
/* Configure MII_RMII selection bit */
*(__IO uint32_t *) PMC_MII_RMII_SEL_BB = SYSCFG_ETH_MediaInterface;
}
/**
* @brief Enables or disables the I/O Compensation Cell.
* @note The I/O compensation cell can be used only when the device supply
* voltage ranges from 2.4 to 3.6 V.
* @param NewState: new state of the I/O Compensation Cell.
* This parameter can be one of the following values:
* @arg ENABLE: I/O compensation cell enabled
* @arg DISABLE: I/O compensation cell power-down mode
* @retval None
*/
void SYSCFG_CompensationCellCmd(FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_FUNCTIONAL_STATE(NewState));
*(__IO uint32_t *) CMPCR_CMP_PD_BB = (uint32_t)NewState;
}
/**
* @brief Checks whether the I/O Compensation Cell ready flag is set or not.
* @param None
* @retval The new state of the I/O Compensation Cell ready flag (SET or RESET)
*/
FlagStatus SYSCFG_GetCompensationCellStatus(void)
{
FlagStatus bitstatus = RESET;
if ((SYSCFG->CMPCR & SYSCFG_CMPCR_READY ) != (uint32_t)RESET)
{
bitstatus = SET;
}
else
{
bitstatus = RESET;
}
return bitstatus;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
@@ -1,309 +1,309 @@
/**
******************************************************************************
* @file stm32f2xx_wwdg.c
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file provides firmware functions to manage the following
* functionalities of the Window watchdog (WWDG) peripheral:
* - Prescaler, Refresh window and Counter configuration
* - WWDG activation
* - Interrupts and flags management
*
* @verbatim
*
* ===================================================================
* WWDG features
* ===================================================================
*
* Once enabled the WWDG generates a system reset on expiry of a programmed
* time period, unless the program refreshes the counter (downcounter)
* before to reach 0x3F value (i.e. a reset is generated when the counter
* value rolls over from 0x40 to 0x3F).
* An MCU reset is also generated if the counter value is refreshed
* before the counter has reached the refresh window value. This
* implies that the counter must be refreshed in a limited window.
*
* Once enabled the WWDG cannot be disabled except by a system reset.
*
* WWDGRST flag in RCC_CSR register can be used to inform when a WWDG
* reset occurs.
*
* The WWDG counter input clock is derived from the APB clock divided
* by a programmable prescaler.
*
* WWDG counter clock = PCLK1 / Prescaler
* WWDG timeout = (WWDG counter clock) * (counter value)
*
* Min-max timeout value @30 MHz(PCLK1): ~136.5 us / ~69.9 ms
*
* ===================================================================
* How to use this driver
* ===================================================================
* 1. Enable WWDG clock using RCC_APB1PeriphClockCmd(RCC_APB1Periph_WWDG, ENABLE) function
*
* 2. Configure the WWDG prescaler using WWDG_SetPrescaler() function
*
* 3. Configure the WWDG refresh window using WWDG_SetWindowValue() function
*
* 4. Set the WWDG counter value and start it using WWDG_Enable() function.
* When the WWDG is enabled the counter value should be configured to
* a value greater than 0x40 to prevent generating an immediate reset.
*
* 5. Optionally you can enable the Early wakeup interrupt which is
* generated when the counter reach 0x40.
* Once enabled this interrupt cannot be disabled except by a system reset.
*
* 6. Then the application program must refresh the WWDG counter at regular
* intervals during normal operation to prevent an MCU reset, using
* WWDG_SetCounter() function. This operation must occur only when
* the counter value is lower than the refresh window value,
* programmed using WWDG_SetWindowValue().
*
* @endverbatim
*
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f2xx_wwdg.h"
#include "stm32f2xx_rcc.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @defgroup WWDG
* @brief WWDG driver modules
* @{
*/
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* ----------- WWDG registers bit address in the alias region ----------- */
#define WWDG_OFFSET (WWDG_BASE - PERIPH_BASE)
/* Alias word address of EWI bit */
#define CFR_OFFSET (WWDG_OFFSET + 0x04)
#define EWI_BitNumber 0x09
#define CFR_EWI_BB (PERIPH_BB_BASE + (CFR_OFFSET * 32) + (EWI_BitNumber * 4))
/* --------------------- WWDG registers bit mask ------------------------ */
/* CFR register bit mask */
#define CFR_WDGTB_MASK ((uint32_t)0xFFFFFE7F)
#define CFR_W_MASK ((uint32_t)0xFFFFFF80)
#define BIT_MASK ((uint8_t)0x7F)
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup WWDG_Private_Functions
* @{
*/
/** @defgroup WWDG_Group1 Prescaler, Refresh window and Counter configuration functions
* @brief Prescaler, Refresh window and Counter configuration functions
*
@verbatim
===============================================================================
Prescaler, Refresh window and Counter configuration functions
===============================================================================
@endverbatim
* @{
*/
/**
* @brief Deinitializes the WWDG peripheral registers to their default reset values.
* @param None
* @retval None
*/
void WWDG_DeInit(void)
{
RCC_APB1PeriphResetCmd(RCC_APB1Periph_WWDG, ENABLE);
RCC_APB1PeriphResetCmd(RCC_APB1Periph_WWDG, DISABLE);
}
/**
* @brief Sets the WWDG Prescaler.
* @param WWDG_Prescaler: specifies the WWDG Prescaler.
* This parameter can be one of the following values:
* @arg WWDG_Prescaler_1: WWDG counter clock = (PCLK1/4096)/1
* @arg WWDG_Prescaler_2: WWDG counter clock = (PCLK1/4096)/2
* @arg WWDG_Prescaler_4: WWDG counter clock = (PCLK1/4096)/4
* @arg WWDG_Prescaler_8: WWDG counter clock = (PCLK1/4096)/8
* @retval None
*/
void WWDG_SetPrescaler(uint32_t WWDG_Prescaler)
{
uint32_t tmpreg = 0;
/* Check the parameters */
assert_param(IS_WWDG_PRESCALER(WWDG_Prescaler));
/* Clear WDGTB[1:0] bits */
tmpreg = WWDG->CFR & CFR_WDGTB_MASK;
/* Set WDGTB[1:0] bits according to WWDG_Prescaler value */
tmpreg |= WWDG_Prescaler;
/* Store the new value */
WWDG->CFR = tmpreg;
}
/**
* @brief Sets the WWDG window value.
* @param WindowValue: specifies the window value to be compared to the downcounter.
* This parameter value must be lower than 0x80.
* @retval None
*/
void WWDG_SetWindowValue(uint8_t WindowValue)
{
__IO uint32_t tmpreg = 0;
/* Check the parameters */
assert_param(IS_WWDG_WINDOW_VALUE(WindowValue));
/* Clear W[6:0] bits */
tmpreg = WWDG->CFR & CFR_W_MASK;
/* Set W[6:0] bits according to WindowValue value */
tmpreg |= WindowValue & (uint32_t) BIT_MASK;
/* Store the new value */
WWDG->CFR = tmpreg;
}
/**
* @brief Enables the WWDG Early Wakeup interrupt(EWI).
* @note Once enabled this interrupt cannot be disabled except by a system reset.
* @param None
* @retval None
*/
void WWDG_EnableIT(void)
{
*(__IO uint32_t *) CFR_EWI_BB = (uint32_t)ENABLE;
}
/**
* @brief Sets the WWDG counter value.
* @param Counter: specifies the watchdog counter value.
* This parameter must be a number between 0x40 and 0x7F (to prevent generating
* an immediate reset)
* @retval None
*/
void WWDG_SetCounter(uint8_t Counter)
{
/* Check the parameters */
assert_param(IS_WWDG_COUNTER(Counter));
/* Write to T[6:0] bits to configure the counter value, no need to do
a read-modify-write; writing a 0 to WDGA bit does nothing */
WWDG->CR = Counter & BIT_MASK;
}
/**
* @}
*/
/** @defgroup WWDG_Group2 WWDG activation functions
* @brief WWDG activation functions
*
@verbatim
===============================================================================
WWDG activation function
===============================================================================
@endverbatim
* @{
*/
/**
* @brief Enables WWDG and load the counter value.
* @param Counter: specifies the watchdog counter value.
* This parameter must be a number between 0x40 and 0x7F (to prevent generating
* an immediate reset)
* @retval None
*/
void WWDG_Enable(uint8_t Counter)
{
/* Check the parameters */
assert_param(IS_WWDG_COUNTER(Counter));
WWDG->CR = WWDG_CR_WDGA | Counter;
}
/**
* @}
*/
/** @defgroup WWDG_Group3 Interrupts and flags management functions
* @brief Interrupts and flags management functions
*
@verbatim
===============================================================================
Interrupts and flags management functions
===============================================================================
@endverbatim
* @{
*/
/**
* @brief Checks whether the Early Wakeup interrupt flag is set or not.
* @param None
* @retval The new state of the Early Wakeup interrupt flag (SET or RESET)
*/
FlagStatus WWDG_GetFlagStatus(void)
{
FlagStatus bitstatus = RESET;
if ((WWDG->SR) != (uint32_t)RESET)
{
bitstatus = SET;
}
else
{
bitstatus = RESET;
}
return bitstatus;
}
/**
* @brief Clears Early Wakeup interrupt flag.
* @param None
* @retval None
*/
void WWDG_ClearFlag(void)
{
WWDG->SR = (uint32_t)RESET;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
/**
******************************************************************************
* @file stm32f2xx_wwdg.c
* @author MCD Application Team
* @version V1.1.2
* @date 05-March-2012
* @brief This file provides firmware functions to manage the following
* functionalities of the Window watchdog (WWDG) peripheral:
* - Prescaler, Refresh window and Counter configuration
* - WWDG activation
* - Interrupts and flags management
*
* @verbatim
*
* ===================================================================
* WWDG features
* ===================================================================
*
* Once enabled the WWDG generates a system reset on expiry of a programmed
* time period, unless the program refreshes the counter (downcounter)
* before to reach 0x3F value (i.e. a reset is generated when the counter
* value rolls over from 0x40 to 0x3F).
* An MCU reset is also generated if the counter value is refreshed
* before the counter has reached the refresh window value. This
* implies that the counter must be refreshed in a limited window.
*
* Once enabled the WWDG cannot be disabled except by a system reset.
*
* WWDGRST flag in RCC_CSR register can be used to inform when a WWDG
* reset occurs.
*
* The WWDG counter input clock is derived from the APB clock divided
* by a programmable prescaler.
*
* WWDG counter clock = PCLK1 / Prescaler
* WWDG timeout = (WWDG counter clock) * (counter value)
*
* Min-max timeout value @30 MHz(PCLK1): ~136.5 us / ~69.9 ms
*
* ===================================================================
* How to use this driver
* ===================================================================
* 1. Enable WWDG clock using RCC_APB1PeriphClockCmd(RCC_APB1Periph_WWDG, ENABLE) function
*
* 2. Configure the WWDG prescaler using WWDG_SetPrescaler() function
*
* 3. Configure the WWDG refresh window using WWDG_SetWindowValue() function
*
* 4. Set the WWDG counter value and start it using WWDG_Enable() function.
* When the WWDG is enabled the counter value should be configured to
* a value greater than 0x40 to prevent generating an immediate reset.
*
* 5. Optionally you can enable the Early wakeup interrupt which is
* generated when the counter reach 0x40.
* Once enabled this interrupt cannot be disabled except by a system reset.
*
* 6. Then the application program must refresh the WWDG counter at regular
* intervals during normal operation to prevent an MCU reset, using
* WWDG_SetCounter() function. This operation must occur only when
* the counter value is lower than the refresh window value,
* programmed using WWDG_SetWindowValue().
*
* @endverbatim
*
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f2xx_wwdg.h"
#include "stm32f2xx_rcc.h"
/** @addtogroup STM32F2xx_StdPeriph_Driver
* @{
*/
/** @defgroup WWDG
* @brief WWDG driver modules
* @{
*/
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* ----------- WWDG registers bit address in the alias region ----------- */
#define WWDG_OFFSET (WWDG_BASE - PERIPH_BASE)
/* Alias word address of EWI bit */
#define CFR_OFFSET (WWDG_OFFSET + 0x04)
#define EWI_BitNumber 0x09
#define CFR_EWI_BB (PERIPH_BB_BASE + (CFR_OFFSET * 32) + (EWI_BitNumber * 4))
/* --------------------- WWDG registers bit mask ------------------------ */
/* CFR register bit mask */
#define CFR_WDGTB_MASK ((uint32_t)0xFFFFFE7F)
#define CFR_W_MASK ((uint32_t)0xFFFFFF80)
#define BIT_MASK ((uint8_t)0x7F)
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup WWDG_Private_Functions
* @{
*/
/** @defgroup WWDG_Group1 Prescaler, Refresh window and Counter configuration functions
* @brief Prescaler, Refresh window and Counter configuration functions
*
@verbatim
===============================================================================
Prescaler, Refresh window and Counter configuration functions
===============================================================================
@endverbatim
* @{
*/
/**
* @brief Deinitializes the WWDG peripheral registers to their default reset values.
* @param None
* @retval None
*/
void WWDG_DeInit(void)
{
RCC_APB1PeriphResetCmd(RCC_APB1Periph_WWDG, ENABLE);
RCC_APB1PeriphResetCmd(RCC_APB1Periph_WWDG, DISABLE);
}
/**
* @brief Sets the WWDG Prescaler.
* @param WWDG_Prescaler: specifies the WWDG Prescaler.
* This parameter can be one of the following values:
* @arg WWDG_Prescaler_1: WWDG counter clock = (PCLK1/4096)/1
* @arg WWDG_Prescaler_2: WWDG counter clock = (PCLK1/4096)/2
* @arg WWDG_Prescaler_4: WWDG counter clock = (PCLK1/4096)/4
* @arg WWDG_Prescaler_8: WWDG counter clock = (PCLK1/4096)/8
* @retval None
*/
void WWDG_SetPrescaler(uint32_t WWDG_Prescaler)
{
uint32_t tmpreg = 0;
/* Check the parameters */
assert_param(IS_WWDG_PRESCALER(WWDG_Prescaler));
/* Clear WDGTB[1:0] bits */
tmpreg = WWDG->CFR & CFR_WDGTB_MASK;
/* Set WDGTB[1:0] bits according to WWDG_Prescaler value */
tmpreg |= WWDG_Prescaler;
/* Store the new value */
WWDG->CFR = tmpreg;
}
/**
* @brief Sets the WWDG window value.
* @param WindowValue: specifies the window value to be compared to the downcounter.
* This parameter value must be lower than 0x80.
* @retval None
*/
void WWDG_SetWindowValue(uint8_t WindowValue)
{
__IO uint32_t tmpreg = 0;
/* Check the parameters */
assert_param(IS_WWDG_WINDOW_VALUE(WindowValue));
/* Clear W[6:0] bits */
tmpreg = WWDG->CFR & CFR_W_MASK;
/* Set W[6:0] bits according to WindowValue value */
tmpreg |= WindowValue & (uint32_t) BIT_MASK;
/* Store the new value */
WWDG->CFR = tmpreg;
}
/**
* @brief Enables the WWDG Early Wakeup interrupt(EWI).
* @note Once enabled this interrupt cannot be disabled except by a system reset.
* @param None
* @retval None
*/
void WWDG_EnableIT(void)
{
*(__IO uint32_t *) CFR_EWI_BB = (uint32_t)ENABLE;
}
/**
* @brief Sets the WWDG counter value.
* @param Counter: specifies the watchdog counter value.
* This parameter must be a number between 0x40 and 0x7F (to prevent generating
* an immediate reset)
* @retval None
*/
void WWDG_SetCounter(uint8_t Counter)
{
/* Check the parameters */
assert_param(IS_WWDG_COUNTER(Counter));
/* Write to T[6:0] bits to configure the counter value, no need to do
a read-modify-write; writing a 0 to WDGA bit does nothing */
WWDG->CR = Counter & BIT_MASK;
}
/**
* @}
*/
/** @defgroup WWDG_Group2 WWDG activation functions
* @brief WWDG activation functions
*
@verbatim
===============================================================================
WWDG activation function
===============================================================================
@endverbatim
* @{
*/
/**
* @brief Enables WWDG and load the counter value.
* @param Counter: specifies the watchdog counter value.
* This parameter must be a number between 0x40 and 0x7F (to prevent generating
* an immediate reset)
* @retval None
*/
void WWDG_Enable(uint8_t Counter)
{
/* Check the parameters */
assert_param(IS_WWDG_COUNTER(Counter));
WWDG->CR = WWDG_CR_WDGA | Counter;
}
/**
* @}
*/
/** @defgroup WWDG_Group3 Interrupts and flags management functions
* @brief Interrupts and flags management functions
*
@verbatim
===============================================================================
Interrupts and flags management functions
===============================================================================
@endverbatim
* @{
*/
/**
* @brief Checks whether the Early Wakeup interrupt flag is set or not.
* @param None
* @retval The new state of the Early Wakeup interrupt flag (SET or RESET)
*/
FlagStatus WWDG_GetFlagStatus(void)
{
FlagStatus bitstatus = RESET;
if ((WWDG->SR) != (uint32_t)RESET)
{
bitstatus = SET;
}
else
{
bitstatus = RESET;
}
return bitstatus;
}
/**
* @brief Clears Early Wakeup interrupt flag.
* @param None
* @retval None
*/
void WWDG_ClearFlag(void)
{
WWDG->SR = (uint32_t)RESET;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/