Add "hardware_defs" target to dump hardware defines from hal.h per target
Fixed hal.h definitions for switches & ADC inputs
Tools to generate hardware definitions from current hal.h
generator: add support for EXTx and analog switches
WiP
Add generated header to hardware_defs target
Add support for ADC input direction and index per GPIO port
Incredible: it compiles
Removed StdPeriph ADC driver
Works on QX7
Works on TX16S (VBat missing)
Switch driver using generated switches for stm32 targets
Switch driver with generated switches for simu
Use switch names from switch driver
Fixed single conversion handling
Fixed horus VBat reading
Added switch name
Fix warnings about bitfield offsets and GCC 4.4
This is caused by bitfields that cross type boundaries. In this particular case, it happens as the bitfield is not defined the same in `rtc_backup.cpp`.
Switches has already been moved to generic driver
Jitter measurement for each sample, not just for oversampled values
Moved periph clock init to the ADC driver
ADC & GPIOs.
Add switchInit() to init pins
Fix NV14 CMake
Fix taranis target
Fix NV14 (again)
Model audio files: use new interface for switch index
Fix X9-lite
Fix simu headers
Fix getSwitchName()
Add support for ADC switches
Fix switch warning YAML
Test only switches which are defined
Conversions tests for QX7 only on QX7
Fix X12S
Fix function switch names
Enable ADC periph clock before initialising channels
NV14: offset inputs for the sticks & fix switches
WiP: get rid of VSRCRAW and some more
Simu shall use normal ADC driver
fix x7
fix nv14
Fix 9x nav
fix 212x64
fix xlite
fix x9e
fix simu lib
fix unit tests
fix x7 tests
PWM stick values should be written directly into adcValues
... just like FlySky sticks.
fix x12s
fix nv14
Add some support for SPI ADC (only unit tests)
Remove `jq` usage
fix generate_yaml.py for newer libclang
fix pot config
fix stick names
Some YAML generator improvements
Max 16 Pots on COLORLCD
Fix some source names
Use 10 bits for switches to prevent overflow
Removed horus constants for switches & ADC inputs
Fix unit tests
Fix curve edit
Fix libsimulator
Fix function switches (tpro)
Refine ADC & analog API
Moved hardware definitions scripts and templates into own dir
cleanup API refine
Fix unit tests
Mixer: apply calibration only on required inputs
Place ADC switches after all other ADC inputs
Fix X12S
Remove useless TR_POTS_VSRCRAW, TR_SW_VSRCRAW, and TR_VSRCRAW
Cleanup redundant generated YAML parsers
Fixes Boxer rebase
Add boxer to generate-hw-defs.sh
Obsolete LUA exports
Add boxer ADC_DIRECTION
Split generate_hw_defs.py into multiple files
Some cleanup (+ LUA switches)
Fix AXIS definitions
Fixed translation strings declarations
Some rebase fixes
Remove some useless StdPeriph drivers
fix: set pin mode to reset state on usart deinit
fix: use canonical names for calibration data
fix: ADC driver does not care about unconfigured inputs
fix X12S ADC
Add support for ADC conversion chaining
Better X12S ADC implem
Moved X12S ADC driver to HAL/LL
Improve ADC driver separation
Fixed taranis & nv14
Moved PWM gimbals to HAL/LL
Removed useless TR_EXTRA_VSRCRAW
Fixed include guards
Small fixes
Renamed control inputs
Moved internal and external module pulse driver def to boards
Move more things to the generic_stm32 board
Remove STR_VMIXTRIMS
Added analog labels
Generate main control names
Misuse labels / short labels for main controls
Backward compatibility: sliders and legacy names
New keys driver
Let's get rid of StdPeriph headers in simu
Add jinja2 to CI workflows
Use `grep` instead of `sed`
chore: add python jinja2 oto msys setup script
Removed more static definitions and use dynamic ones instead
Fixes X9E
Fix x7 nav too
212 switch display
Fix default sliders
Removed NUM_STICKS
212 switch display working nicely
Surface radio 'stick' replacements
fix: switch, trim & rotary pin init
Remove old key drivers
Removed VKEYS
Removed ETX_FOURCC
Fixed SURFACE_NAME
Removed TR_VSWITCHES & TR_TRIMS_SWITCHES
Fix xpot switches
Store calibrated analogs in physical order
Use getSourceString in drawSource
Implement missing YAML read/write
Fix isSourceAvailableInInputs()
Fix isSourceAvailable()
Some surface fixes
Fix CLI debug
Ported colour UI of analog diagnostics to new ADC API
Small fixes
Better input mapping
Minor tpro fixes
Fix trims available
Remove TX mode choice on surface radio
Rename surface controls
Channel order alignement
Fix throttle warning
Fix checkTrims()
Fix pot config casting issue
Fix IS_SWITCH_FS()
Fixed input mapping
Fix fswitch auto-switch
Fixed storing / reading function switches in YAML
Fix enableVBatBridge() / disableVBatBridge()
Fix interesting mode conversion
Fix sources issues
Fix special funnction list
Proper function switch handling
128 GUI improvements
Fix compilation
Boxer cosmetics
128 hardware screen cosmetic
Fix TX12 switches
More switches fixes
Simplify CPU type handling
Fix flash size
Fixed page-up / page-down in libopenui
* Allow switches on the connected radio to control switches in the simulator via the joystick interface.
* Merge configurable radio joystick interface from banyaszg.
* Add two more 'axis' channels to companion.
* Fix 6POS from USB joystick to simulator.
* Reduce data size.
* Fix build error on B&W radios.
* Add 'Companion' button mode to work with the button logic in the Companion app.
* Build Companion joystick setup layout at runtime.
Change #define names for simulator joystick.
Allow 15 axes and 32 buttons.
Initial support for trim sliders.
* Remove custom joystick button type for companion - use 3 buttons per switch in companion to control simulator switch state.
* Fix joystick constructor calls parameters. Connect some radio joystick trims to simulator widgets.
* Restore 'companion' button type to reduce number of buttons needed. Make trims work via buttons in USB joystick.
* Connect joystick trim buttons to simulator widgets.
* Use companion source names for trims.
* Add encode / decode of usb joystick custom settings to Companion.
* Convert to lvgl layouts.
Update language files.
* Fix generated YAML storage files.
* Fix initialisation error when editing button channel. Cleanup code.
* Fix rebase.
* Fix refresh of joystick channel list view after editing an entry.
Companion joystick config window uses two columns.
* Fix vertical joystick inversion bug.
Change stick axis labels.
---------
Co-authored-by: Phil Mitchell <phil.a.mitchell@gmail.com>
* Changed USB Gamepad resolution to full 11 bit and fixed offset issues for some games
* Changed USB Gamepad resolution to full 11 bit and fixed offset issues for some games
* Changed USB Gamepad resolution to full 11 bit and fixed offset issues for some games
* Save 128 byte by moving variable to stack
* Make usb mass storage buffer smaller on F2 processors and put into reuseablebuffer
- Lower USB mass storage buffer to 512 bytes per default on F2
targets, makes usb speed slightly slower ~600 kB/s instead ~700 KB/s
in my tests, saving 3584 bytes
- Save another ~300 bytes by putting that buffer into reusableBuffer
* Don't put id into reusuableBuffer
All uses of id can be on the stack as well. Makes no difference for ram usage but makes it safer to reuse reusableBuffer
* Only link cdc serial when needed
We always linked usb cdc even in non debug builds. CDC uses about ~600 byte of RAM for its buffers and structures.
* Missing debug timer
* USB driver cleanup
* Re #4479: Joystick update called from mixer thread every 10ms
* Cosmetics
* Compilation fix
* Cosmetics
* Another compilation fix
