261c0213f30b8224a1ef0fc7cdd5a0fbc7ea777f
3
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 raphaelcoefficandMalte Langermann
|
c15c5ea9eb | fix: switch position if disabled or transitioning | ||
|
Raphael CoefficandMalte Langermann
|
2b100e0eb5 |
refact: ADC, switches and keys
Add "hardware_defs" target to dump hardware defines from hal.h per target Fixed hal.h definitions for switches & ADC inputs Tools to generate hardware definitions from current hal.h generator: add support for EXTx and analog switches WiP Add generated header to hardware_defs target Add support for ADC input direction and index per GPIO port Incredible: it compiles Removed StdPeriph ADC driver Works on QX7 Works on TX16S (VBat missing) Switch driver using generated switches for stm32 targets Switch driver with generated switches for simu Use switch names from switch driver Fixed single conversion handling Fixed horus VBat reading Added switch name Fix warnings about bitfield offsets and GCC 4.4 This is caused by bitfields that cross type boundaries. In this particular case, it happens as the bitfield is not defined the same in `rtc_backup.cpp`. Switches has already been moved to generic driver Jitter measurement for each sample, not just for oversampled values Moved periph clock init to the ADC driver ADC & GPIOs. Add switchInit() to init pins Fix NV14 CMake Fix taranis target Fix NV14 (again) Model audio files: use new interface for switch index Fix X9-lite Fix simu headers Fix getSwitchName() Add support for ADC switches Fix switch warning YAML Test only switches which are defined Conversions tests for QX7 only on QX7 Fix X12S Fix function switch names Enable ADC periph clock before initialising channels NV14: offset inputs for the sticks & fix switches WiP: get rid of VSRCRAW and some more Simu shall use normal ADC driver fix x7 fix nv14 Fix 9x nav fix 212x64 fix xlite fix x9e fix simu lib fix unit tests fix x7 tests PWM stick values should be written directly into adcValues ... just like FlySky sticks. fix x12s fix nv14 Add some support for SPI ADC (only unit tests) Remove `jq` usage fix generate_yaml.py for newer libclang fix pot config fix stick names Some YAML generator improvements Max 16 Pots on COLORLCD Fix some source names Use 10 bits for switches to prevent overflow Removed horus constants for switches & ADC inputs Fix unit tests Fix curve edit Fix libsimulator Fix function switches (tpro) Refine ADC & analog API Moved hardware definitions scripts and templates into own dir cleanup API refine Fix unit tests Mixer: apply calibration only on required inputs Place ADC switches after all other ADC inputs Fix X12S Remove useless TR_POTS_VSRCRAW, TR_SW_VSRCRAW, and TR_VSRCRAW Cleanup redundant generated YAML parsers Fixes Boxer rebase Add boxer to generate-hw-defs.sh Obsolete LUA exports Add boxer ADC_DIRECTION Split generate_hw_defs.py into multiple files Some cleanup (+ LUA switches) Fix AXIS definitions Fixed translation strings declarations Some rebase fixes Remove some useless StdPeriph drivers fix: set pin mode to reset state on usart deinit fix: use canonical names for calibration data fix: ADC driver does not care about unconfigured inputs fix X12S ADC Add support for ADC conversion chaining Better X12S ADC implem Moved X12S ADC driver to HAL/LL Improve ADC driver separation Fixed taranis & nv14 Moved PWM gimbals to HAL/LL Removed useless TR_EXTRA_VSRCRAW Fixed include guards Small fixes Renamed control inputs Moved internal and external module pulse driver def to boards Move more things to the generic_stm32 board Remove STR_VMIXTRIMS Added analog labels Generate main control names Misuse labels / short labels for main controls Backward compatibility: sliders and legacy names New keys driver Let's get rid of StdPeriph headers in simu Add jinja2 to CI workflows Use `grep` instead of `sed` chore: add python jinja2 oto msys setup script Removed more static definitions and use dynamic ones instead Fixes X9E Fix x7 nav too 212 switch display Fix default sliders Removed NUM_STICKS 212 switch display working nicely Surface radio 'stick' replacements fix: switch, trim & rotary pin init Remove old key drivers Removed VKEYS Removed ETX_FOURCC Fixed SURFACE_NAME Removed TR_VSWITCHES & TR_TRIMS_SWITCHES Fix xpot switches Store calibrated analogs in physical order Use getSourceString in drawSource Implement missing YAML read/write Fix isSourceAvailableInInputs() Fix isSourceAvailable() Some surface fixes Fix CLI debug Ported colour UI of analog diagnostics to new ADC API Small fixes Better input mapping Minor tpro fixes Fix trims available Remove TX mode choice on surface radio Rename surface controls Channel order alignement Fix throttle warning Fix checkTrims() Fix pot config casting issue Fix IS_SWITCH_FS() Fixed input mapping Fix fswitch auto-switch Fixed storing / reading function switches in YAML Fix enableVBatBridge() / disableVBatBridge() Fix interesting mode conversion Fix sources issues Fix special funnction list Proper function switch handling 128 GUI improvements Fix compilation Boxer cosmetics 128 hardware screen cosmetic Fix TX12 switches More switches fixes Simplify CPU type handling Fix flash size Fixed page-up / page-down in libopenui |
||
|
Raphael CoefficandGitHub
|
72193eda82 |
chore: New module/serial API (#3055)
* WiP: new module interface * WiP: softserial timer DMA * WiP: setup() and send() in one step and remove methods specific to internal or external module * fixes and extra port config * horus targets * module ports have moved * T8 support (only internal module) * fix nv14 * stupid GCC.... * disable BT * remove nv14 telem driver * remove old aux serial driver * Move module buffers out of pulses.h * Soft serial fixes and PXX1 support * Fixed PPM module output * Fixed CLI * compilation fixes * Ported bluetooth and flysky gimbal to new serial driver * Re-enable soft-serial RX * fixes and cleanup * nv14 fixes * Fix flysky gimbals * Ghost module * 16 bytes of RAM * Remove getByte from module API * Ghost cleanup * fix: _half_duplex_input() must be called after usart init * WiP * more cleanup * Remove board specific settings from PXX1 / PXX2 drivers * A bit of PXX2 header cleanup * Add support for OVER8 and ONEBIT * Add some support for inverters (NV14 / EL18) * Support NV14 power fixes in generic board * Fix polarity handling * Fix RX DMA * Fix mixer not running * Add soft-serial polarity control * Quick fix for telemetry polling while module port is changed * Fix bootloader DEBUG * Fix MPM telemetry * Fix pulse start * DSM2 soft-serial fallback * DSMP async module restart * Fix CRSF LUA upstream * Remove global variable telemetryProtocol * Use HAL/LL constants * Fix various issue with AFHDS3 and NV14/EL18 internal module * Fixed S.PORT unit tests * fix: update widx after writing at current index * fix: init error condition * Fix: possible infinite loop in _find_port() * Add support for bidir S.PORT init * Add support for "getLastByte" in HW serial driver * PXX1: Add support for S.PORT based on IDLE callback * Fix rebase error * Fix softserial _rx_fifo_push() * Add softserial support for waitForTxCompleted() * Fix MPM flashing (internal / external) * Fixed external MPM * Activate RX DMA on internal module Seems to work with serial passthrough without issues, at least on the L3R PRO. * Fix softserial DMA on stdlcd F4 targets * Add softserial support for 32bit timers (mostly TIM2) * More precise soft-serial * Fix MPM update using inverters & HW uart * Raise S.PORT DMA/USART IRQ prio to achieve faster switching to input * Remove useless delays * Fix flashing external ELRS module * Added a retry mechanism for FrSky S.PORT update * Remove useless enableRx() * External FrSky modules are all flashed via S.PORT * Remove power management unit update This was only used on the first batch of X-lite. |