* fixes#2713
changes:
- use getMultiOptionTitle() instead of rfproto->getOptionStr() as getMultiOptionTitle() takes updated MPM status in account
* code cleanup: removed obsolete functions
* fix#3046
* fixed my complete misunderstanding of how the chosen protocol is updated in Multi DSM auto mode
* removed obsolete check
* update subType list only on rf protocol change
added some comments
* reconsidered implementation utilizing LV_EVENT_REFRESH to avoid sporadic loss of update
* editorial change
* fix problem where a successful MPM DSM2 auto bind would reset the receiver ID
* reset DSM2autoUpdated just in case
* Add options to disable radio and model menu tabs.
- Update radio and model data structs
- UI for color LCD radios
- Convert existing 'noGlobalFunctions' property.
- Language strings.
* Make 'theme' control specific to color LCD radios.
* Add B&W radio UI.
* Simplify code, reduce compiled code size.
Fix page count display on model select tab.
Fix GVARS for 212x64 radios.
* Collapse timer sections if timer is off.
* Remove 'Use global functions' checkbox from B&W model setup.
* Make preflight checks, throttle and view options sections expand & collapse (default collapsed).
* Fix build.
* Add view options to companion data classes, save and load values in YAML files.
Fix scrolling for radio setup view options.
* Add Companion UI for view option settings.
* Remove 'Mixes' from list of tabs that can be hidden.
* Updated Companion UI from elecpower.
* Use view options flags to enable/disable functionality:
- skip heli mixer logic if heli not enabled
- Remove heli, gvars and telemetry options from source selection if not enabled
* Remove 'flight mode', 'curve' and 'global variable' settings from input & mix editors if option disabled.
* Rename 'View Options' to 'Enabled Features'.
Put GVAR option under Flight Mode and indent text.
Make relationship between FM and GV more obvious.
* Remove global variable option dependency on flight modes.
Hide FM1-FM8 in global variables if flight modes hidden.
* Hide 'Custom Mixer Scripts' in source selection menu popup if disabled.
* Add translation strings for Hebrew language file.
* Fix typo. Add comment for double call to setCurrentTab.
* - Concentrated Multi protocol definitions into a consistent single source. Actually two .h files, one for the protocol list and names, the other for subtypes and capababilites, see comments in .h files as to why
- updated available protocols reflecting 1.3.3.20 (15+ protocols)
- fixed Companion always showing f/s and channel map options in model setup disregarding the protocol capability
* Following @pfeerick's review: changed heaeders and typos
fixed Ubuntu runtime error on assert
fixed change of Multi protocol not triggering writing yaml file
* corrected copy/paste error
* fixed FrSky index juggling
* Updated Multiprotocol database to current MPM project status (ref. MPM Multiprotos.ino)
- changed protocol name FX816 to FX
- added Flysky AFHDS2A options PPM and PPWM SBUS 16ch subtypes "PWM,SB16" and "PPM,SB16
- added V761 option to select TOPRC
- added FX options "816" and "620"
- added FRSKYR9 option "-- 8ch"
* MPM protocol scan excludes some protocols which are not meant to be selected. For Companion and Simualtor (and for radios if there is no MPM connected) this was handled in different places with outdated information. Harmonized and centralized the handling of non-selectabale protocols into the single source for all companion, Simulator and all gui types.
* More cleanup:
- changed some MPM protocol names to the ones the MPM delivers with MPM protocol scan to harmonize names between CPN/Simulator/radio
- added XN2927DUMP and MOULDKG to the list of excluded MPM protocols just like the MPM does with MPM protocol scan
- added new option value limits and moved definitions to single source
- adapted CPN and radio to use common definitions of option values for all GUI types
- moved distributed MPM (as far as possible) to one coherent place under a single #if defined (MULTIMODULE)
- fixed option value not reset at change of protocol
- some editorial stuff
Note: There is still some work to be done on CPN GUI option values. DSM2 servo rates are hard coded, BAYANG telemetry options are only shown by index and not by text as in radio code, AFHDS2A servo update rate is shown as index too which is to no use for users.
I'll try to fix all this in the next session, but request to get rid of BAYANG telemetry options translations. It is much easier to define a common string list by using untranslated.h
* rebase due to fr.h
* resolve merge conflict with main fr.h
* more cleanup:
- deleted multiple definition of MM_RF_CUSTOM_SELECTED in favor of single source define
- bw radios: change to only allow defined protocols rather than a fixed 127 protocols
* Changes:
- magic sentinel number 0xfe as define
- add 10 NN protocol entries for future use of new MPM protocols not yet defined in ETX (still recommend timely ETX maintenance update if MPM releases new firmware)
* Changes by @elecpower:
- align field labels to radio
- change servo update frequency from combo box to spin box with edit only via up/down arrows to stop invalid values being entered via keyboard. Remove frequency list used to populate combo box as only used by Companion.
- add validation to module yaml decode checking for unsupported multi protocols and/or multi protocol sub types and if unsupported set module to OFF just to be safe.
* Changes:
- radio: added validation to module yaml decode checking for unsupported multi protocols and/or multi protocol sub types and if unsupported set module to OFF just to be safe.
* CPN: use sentinel define
* cpn: Sort multi protocols list (courtesy @elecpower)
* fixes#3480
changes:
- moved FrSky subtype defines to MultiProtoDefs.h
- updated bind_button_driver.cpp
* missed replacing one instance of setMultiProtocol()
* changes:
- editorial change
- added multi option to OMP protocol (ref #2713)
* rather go for STR_MULTI_RFTUNE because MPM manual talks about RF tune
* made XN297_DUMP selectable (available with MPM debug fw only)
* corrected merge mistakes
* Fix memory leaks when using 'USB Storage (SD)' connection.
- Lua state 'cache' allocated to both lsScripts and lsWidgets; but only one was being released.
- Default theme bitmaps being reloaded without releasing previously allocated memory.
* Fix icons.
* RX stat (formerly known as "RSSI") labeling dependent on protocol (RSSI/dbm, Rqly/%, Sgnl/-) used for range check, multi rf tuning and low/critical warning settings pages
* chore: Bump libopenui
* removed define that was supposed to be for testing only
function getRxStatLabels(): wasting flash as inline, no need to be inlined
* removed inline on getRxStatLabels() - step 2
* introducing external MLink module telemetry as module PPM subtype
* implemented fix for sensor discovery display not showing all detected sensors (is in separate PR too)
implemented PPM subtypes in Companion
* add PPM subtype to model printer
finalize subtypes for PPM in Companion
* added logic to try to use HW UART with inverters turned off first (e.g. NV14), then, if not successfull use soft serial inverted (== uninverted data due to HW inverters on PCB)
changed start bit detection IRQ priority from 5 to the previous 0 (also in separate PR)
* extended telemetry timeout to 2s due to slow Mlink RSSI update rate
* changed the "NOTLM" sub-type texts to:
- "No Telem" for 128x64 (this is the max numbers of characters it can take)
- "No Telemetry" everything else including Companion
* Companion:
- lower case 1st charachter on PpmSubTypeStrings to ppmSubTypeStrings
- added telemetry hooks for ppmSubTypeStrings stringx
* simplified serial port initialization for MLink telemetry
* editorial change: corrected obsolete comment
* Translation for range test
* Translation for range test
* Translation for range test
* Reviewed translations for 9 languages
Reviewed translations for 9 of 11 actively translated languages
* Translations for Chinese and Taiwanese
* Fix scroll order for module options when 'FlySky' module type selected.
Fix simulator crash issues related to FlySky module.
* Fix more simulator crashes
* Add 'Show Instance ID' button to telemetry page to show/hide sensor instance number (default is hidden).
Fix issues with page refresh when all sensors deleted.
Select closest sensor when a single sensor is deleted.
On change, only refresh the sensor list instead of the whole page.
The 'showInstanceIds' property is saved to the model file.
Update Companion to save/load 'showInstanceIds' in model YAML file. Add checkbox to telemetry edit page.
* Update all radio specific files.
* Keep focus on 'Discover/Stop' button when searching for new sensors.
Start sensor ID index at 1 to match B&W radios.
Keep focus on changed parameter when editing sensor, don't rebuild entire parameter list on change.
* Display actual 'instance' ID instead of 'instance' + 1.
* Fix incorrect ID when reloading simulator data.
* Fix incorrect ID when reloading simulator data on B&W radios.
* Rework the rotary encoder acceleration calculation, and remove double handling of acceleration.
* Reduce the acceleration sensitivity.
* Set the 'rotencSpeed' variable for the Lua getRotEntSpeed function().
* Fix the BUG of V0 receiver setting IBUS SBUS; add the setting item of INRM301.
* Fix check failure; remove some unused characters.
* Fix typos and rename variables as well as fix compilation errors.
* add language
* Add layout 4+2B right side 3QRT+1QRT
* Fix Layout 4+2B LayoutId, length max 9 char
* Maybe this will work?
---------
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
* Add support for the '1x' repeat option for 'Play Script' special functions.
* Add Companion and B&W radio support.
* Fix B&W radio logic and layout.
* Add translation hooks.
* Change ThemeFile class to use generic YAML parser instead of hard wired code.
Fix handling of empty input lines in YAML parser.
Increase size of YAML parser variables to handle theme 'info' property length.
* Update comment.
* Fix error.
* Proper fix for blank lines in YAML file.
* Fix YAML blank line handling (attempt 3).
* Ensure theme YAML file is backward compatible.
* Store selected theme in radio settings instead of selectedtheme.txt file.
On start, if radio settings theme is empty, try and load from selectedtheme.txt file.
In Companion, save/load the selected theme in the radio settings YAML file; but no UI to select theme.
* Update selected theme name in radio.yml if the theme name was edited.
* Only save 'selectedTheme' in Companion on color LCD radios.
* better_debug_name_on_statistics_page
* chore: Translations for Lua related strings
* chore: More translation strings for stats screen
* chore: Padding for STR_MS, STR_BYTES
---------
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
* Flight mode list and edit changes:
- Update trim ranges in Companion to match radio.
- Move trims setup to main edit view instead of dialog popup.
- Show/edit current trim value for each trim (if enabled)
* Show flight mode list view like logical switches.
* Update FM trim values in edit window if trim is changed (via trim switch).
* Use styles for layout
* Remove grid layouts - use flex flow as it is faster.
* Speed up page build time.
Reduces build time on TX16S Mk2 from ~320ms to ~25ms.
* Fix touch screen events.
* chore(ui): speedup gvars page
* Replace StaticText with LVGL labels.
* Further performance improvements.
* Remove diagnostics.
* Fix portrait layout.
* Refactor style to a separate class and use CHECKED state to control color of selected flight mode.
* Remove duplicate lines.
* User LVGL state and style for GV value font size selection.
Reduce the number of times the style_refresh state is changed.
* Center align name without needing hard wired offsets.
* Speed up page build time.
* chore: Bump libopenui
gagarinlg chore(ui): improve static text and window base speed (#88)
---------
Co-authored-by: gagarinlg <malte@langermann.net>
