Peter Feerick
2b457637e6
Manually re-add #617 build options
2021-08-30 21:26:18 +10:00
kkoenig1@optonline.com and kevinkoenig
59234cd145
Modified mask_key_backspace.png. These bitmaps should have no extra padding around them. IMHO
...
Modified horus target to add SOFTWARE_KEYBOARD.
2021-08-29 09:20:22 -04:00
Risto and GitHub
525126e155
Merge pull request #617 from EdgeTX/Horus_I2C_conf
...
Adds support of LSM6DS33 IMU to TX16S via AUX1 port
2021-08-24 17:05:08 +02:00
rotorman
d19dcb9fc9
Unified dual I2C naming across Taranis and Horus builds.
...
Using "*_B1_*" for first logical I2C bus and "*_B2_*" for second logical I2C bus (instead of less clear I2C and I2CX).
2021-08-21 15:59:19 +02:00
rotorman
b123caba06
Adds support of LSM6DS33 I2C IMU to TX16S via AUX1 port. Using CMake option -DIMU_LSM6DS33=YES the std. serial USART3/AUX1 functionality is changed to I2C2 bus.
...
The temperature, gyro and linear acceleration values of LSM6DS33 are sampled and displayed at radio analogs dialog screen in SI-units.
2021-08-21 15:08:50 +02:00
rotorman
8400159871
Enables AUX1 again when FlySky Hall sticks are used.
...
Tested on RM TX16S, AUX1/USART3 and Hall Sticks on UART4, both work.
2021-08-21 11:59:08 +02:00
Peter Feerick
324dbb7d8a
GPS, EXT_ANT icon relative to target screen width
2021-08-20 20:35:35 +10:00
Peter Feerick
4e7d7cea59
USB and log icons relative to target screen width
2021-08-20 20:34:06 +10:00
Richard Li
9f498e5ec4
Datetime display does not display CN/TW translations properly.
2021-08-19 13:08:28 +08:00
Raphael Coeffic
f5dec4e31e
Fix AUX2 serial RX DMA stream
...
Thx @olliw42 (see opentx/opentx#8656 )
2021-08-07 08:42:30 +02:00
Raphael Coeffic
49bec9110d
[color] fixed internal GPS cmake settings
2021-08-05 13:58:13 +02:00
Raphael Coeffic
56b30ffa9e
X12S fixes (not tested)
2021-07-31 18:46:42 +02:00
Raphael Coeffic
5ba5cb299e
Hotfix for X12S ADC driver
2021-07-31 18:46:41 +02:00
Raphael Coeffic
f1fd6dde02
Integrate NV14 ADC driver into generic stm32_hal_driver
2021-07-31 18:46:40 +02:00
rotorman and Raphael Coeffic
897d2f3025
Adheres to the STM32F429 reference manual (RM0090) Section 10.3.17 DMA stream configuration procedure.
...
Before write access is permitted to numerous DMA registers, need to make sure that DMA is disabled for the stream. Disabling the stream is not instantaneous, and needs to be waited for (previous transmissions need to be finished first).
Added return values to numerous functions to signal a failure.
2021-07-31 18:46:40 +02:00
Raphael Coeffic
0e4201f25d
WiP
2021-07-31 18:46:38 +02:00
Raphael Coeffic
cf480b03a3
[adc] Use StdPeriph lib instead of direct reg access
2021-07-31 18:46:37 +02:00
Raphael Coeffic
b8ee83da32
[nv14] Fixed unknown type
2021-07-31 17:52:28 +02:00
Raphael Coeffic
1f6b384927
internal module timer is no longer in use
2021-07-31 17:31:51 +02:00
rotorman and Raphael Coeffic
3ac70da582
Changed I2C timing to FreeRTOS ticks and added HAL_I2C_Mem_Write_DMA() and HAL_I2C_Mem_Read_DMA() from STM32F4 HAL in preparation of changing to DMA based I2C.
2021-07-31 17:31:51 +02:00
Raphael Coeffic
d4edb7713e
WiP: FreeRTOS integration
2021-07-31 17:31:49 +02:00
Raphael Coeffic
b6420fa876
[nv14] Fixed polarity on types of external modules
2021-07-27 18:45:20 +02:00
Raphael Coeffic
61f5babd43
[nv14] fix polarity for soft serial on PPM pin
2021-07-27 17:34:23 +02:00
Raphael Coeffic and GitHub
6e9b09b548
Merge pull request #494 from EdgeTX/nv14-build
...
NV14 Support and Build
2021-07-27 09:39:03 +02:00
Richard Li
afe6245ae8
Updated extmodule change to only specific to NV14 and will not affect other radios.
2021-07-27 15:25:53 +08:00
Raphael Coeffic and GitHub
1dcb66d83a
Merge pull request #477 from EdgeTX/403-access-denied
...
Enable ISRM internal module for non-FrSky hardware (T16 / TX16S / etc...)
2021-07-27 06:02:45 +02:00
richardclli and GitHub
d9d4591008
Merge pull request #495 from EdgeTX/main
...
Merge from main
2021-07-24 00:23:37 +08:00
3djc and Raphael Coeffic
fd94ffeb86
Fix colorlcd FRM302 ( #8624 )
2021-07-22 20:57:15 +02:00
Richard Li
3a754126ca
Try to fix external module.
2021-07-22 12:46:11 +08:00
Raphael Coeffic
6bf0fe2889
Cleanup useless code
2021-07-21 16:06:16 +02:00
Raphael Coeffic
00e4194a70
Replace proprietary libAccess
2021-07-20 13:52:29 +02:00
rotorman
ef08fc019f
Incremented GT911 configuration with +1 and stopped writing it to GT911 on init/start if the same version has already been flashed to GT911 (as previously).
2021-07-18 11:32:14 +02:00
Risto and GitHub
0423b8d286
Stop disabling interrupts while clearing ADDR bit
2021-07-17 14:40:28 +02:00
rotorman
5f0bac3dc9
Rewrore STM32F4 HAL_I2C_MspDeInit to not call HAL_GPIO_DeInit(), but only disable I2C GPIO with GPIO_Init().
2021-07-16 18:40:52 +02:00
rotorman
a886c72a55
Cosmetics
2021-07-15 23:09:33 +02:00
rotorman
b86745d8f4
Clear ADDR bit in atomic way. Not in original STM32F4 HAL.
...
Lower timeouts to more reasonable values.
2021-07-15 22:41:12 +02:00
rotorman
2ca5cc771c
Added De-Init and Re-Init (in case this is ever required).
2021-07-15 21:34:20 +02:00
rotorman
8bfbb723f3
Integrated STM32F4 I2C HAL functions.
...
Changed old "I2C_SPEED" to "I2C_CLK_RATE" in order not to conflict with HAL.
Use TOUCH_INT again to gate touch sampling.
2021-07-15 19:25:31 +02:00
richardclli and GitHub
85723fac20
Merge pull request #447 from EdgeTX/2.4
...
Merge from 2.4 branch
2021-07-14 10:41:13 +08:00
Raphael Coeffic
068c1a0f11
Renamed "hiccups" to "TSI2CEvents"
...
And use uint32_t for counting them.
2021-07-12 08:58:54 +02:00
Raphael Coeffic
52acfcd20d
Quick & dirty polling mode (don't care about INT line)
2021-07-11 17:43:31 +02:00
Raphael Coeffic
49ae57d370
Take account of some corner cases in I2C multi-byte read
...
See https://github.com/geoffreymbrown/STM32-Template/blob/master/Library/i2c.c#L39 and RM0090 p851-853.
2021-07-11 14:30:43 +02:00
rotorman and Raphael Coeffic
8c7f3cecec
* removed red LED
...
* added GT911 fw version and hiccup cound output to analogs page
* changed I2C to 400 kHz
* changed X Y threshold to 1
* added trace output
* fixed bool / uint8_t errors
2021-07-11 13:04:13 +02:00
rotorman and Raphael Coeffic
2c65b21355
Based on PR #408 ff34616 that according to @rcvideoreviews on Discord works.
...
Added:
* @olliw42 PR #415 STOP condition fix.
* @raphaelcoeffic EXTI_Trigger_Rising
* fixed some uint8_t bool confusions
* added volatile to touchEventOccured that is set from ISR and accessed from main code
* changed to upload GT911 config also if config version is the same
2021-07-11 13:04:13 +02:00
olliw42 and Raphael Coeffic
2eef807fba
avoid compile warning
2021-07-10 07:06:57 +02:00
Risto and GitHub
7f472ff5e8
Merge pull request #396 from rotorman/X12S_RTC
...
Enable VBat bridge to enable RTC coin cell sampling on X12S
2021-07-07 10:36:28 +02:00
Richard Li
17ed43d0d0
Fixed flysky hall stick mod problem in T16.
2021-07-07 13:48:32 +08:00
Richard Li
1d81db0113
Updated timer driver to use 1ms loop to compatible with nv14.
2021-07-07 10:39:16 +08:00
richardclli and GitHub
6eae66b352
Merge pull request #407 from EdgeTX/2.4
...
Merge 2.4 changes
2021-07-05 11:42:14 +08:00
Risto and GitHub
f604fed503
Try fix X12S RTC battery sampling
2021-07-03 13:48:02 +02:00