Add "hardware_defs" target to dump hardware defines from hal.h per target
Fixed hal.h definitions for switches & ADC inputs
Tools to generate hardware definitions from current hal.h
generator: add support for EXTx and analog switches
WiP
Add generated header to hardware_defs target
Add support for ADC input direction and index per GPIO port
Incredible: it compiles
Removed StdPeriph ADC driver
Works on QX7
Works on TX16S (VBat missing)
Switch driver using generated switches for stm32 targets
Switch driver with generated switches for simu
Use switch names from switch driver
Fixed single conversion handling
Fixed horus VBat reading
Added switch name
Fix warnings about bitfield offsets and GCC 4.4
This is caused by bitfields that cross type boundaries. In this particular case, it happens as the bitfield is not defined the same in `rtc_backup.cpp`.
Switches has already been moved to generic driver
Jitter measurement for each sample, not just for oversampled values
Moved periph clock init to the ADC driver
ADC & GPIOs.
Add switchInit() to init pins
Fix NV14 CMake
Fix taranis target
Fix NV14 (again)
Model audio files: use new interface for switch index
Fix X9-lite
Fix simu headers
Fix getSwitchName()
Add support for ADC switches
Fix switch warning YAML
Test only switches which are defined
Conversions tests for QX7 only on QX7
Fix X12S
Fix function switch names
Enable ADC periph clock before initialising channels
NV14: offset inputs for the sticks & fix switches
WiP: get rid of VSRCRAW and some more
Simu shall use normal ADC driver
fix x7
fix nv14
Fix 9x nav
fix 212x64
fix xlite
fix x9e
fix simu lib
fix unit tests
fix x7 tests
PWM stick values should be written directly into adcValues
... just like FlySky sticks.
fix x12s
fix nv14
Add some support for SPI ADC (only unit tests)
Remove `jq` usage
fix generate_yaml.py for newer libclang
fix pot config
fix stick names
Some YAML generator improvements
Max 16 Pots on COLORLCD
Fix some source names
Use 10 bits for switches to prevent overflow
Removed horus constants for switches & ADC inputs
Fix unit tests
Fix curve edit
Fix libsimulator
Fix function switches (tpro)
Refine ADC & analog API
Moved hardware definitions scripts and templates into own dir
cleanup API refine
Fix unit tests
Mixer: apply calibration only on required inputs
Place ADC switches after all other ADC inputs
Fix X12S
Remove useless TR_POTS_VSRCRAW, TR_SW_VSRCRAW, and TR_VSRCRAW
Cleanup redundant generated YAML parsers
Fixes Boxer rebase
Add boxer to generate-hw-defs.sh
Obsolete LUA exports
Add boxer ADC_DIRECTION
Split generate_hw_defs.py into multiple files
Some cleanup (+ LUA switches)
Fix AXIS definitions
Fixed translation strings declarations
Some rebase fixes
Remove some useless StdPeriph drivers
fix: set pin mode to reset state on usart deinit
fix: use canonical names for calibration data
fix: ADC driver does not care about unconfigured inputs
fix X12S ADC
Add support for ADC conversion chaining
Better X12S ADC implem
Moved X12S ADC driver to HAL/LL
Improve ADC driver separation
Fixed taranis & nv14
Moved PWM gimbals to HAL/LL
Removed useless TR_EXTRA_VSRCRAW
Fixed include guards
Small fixes
Renamed control inputs
Moved internal and external module pulse driver def to boards
Move more things to the generic_stm32 board
Remove STR_VMIXTRIMS
Added analog labels
Generate main control names
Misuse labels / short labels for main controls
Backward compatibility: sliders and legacy names
New keys driver
Let's get rid of StdPeriph headers in simu
Add jinja2 to CI workflows
Use `grep` instead of `sed`
chore: add python jinja2 oto msys setup script
Removed more static definitions and use dynamic ones instead
Fixes X9E
Fix x7 nav too
212 switch display
Fix default sliders
Removed NUM_STICKS
212 switch display working nicely
Surface radio 'stick' replacements
fix: switch, trim & rotary pin init
Remove old key drivers
Removed VKEYS
Removed ETX_FOURCC
Fixed SURFACE_NAME
Removed TR_VSWITCHES & TR_TRIMS_SWITCHES
Fix xpot switches
Store calibrated analogs in physical order
Use getSourceString in drawSource
Implement missing YAML read/write
Fix isSourceAvailableInInputs()
Fix isSourceAvailable()
Some surface fixes
Fix CLI debug
Ported colour UI of analog diagnostics to new ADC API
Small fixes
Better input mapping
Minor tpro fixes
Fix trims available
Remove TX mode choice on surface radio
Rename surface controls
Channel order alignement
Fix throttle warning
Fix checkTrims()
Fix pot config casting issue
Fix IS_SWITCH_FS()
Fixed input mapping
Fix fswitch auto-switch
Fixed storing / reading function switches in YAML
Fix enableVBatBridge() / disableVBatBridge()
Fix interesting mode conversion
Fix sources issues
Fix special funnction list
Proper function switch handling
128 GUI improvements
Fix compilation
Boxer cosmetics
128 hardware screen cosmetic
Fix TX12 switches
More switches fixes
Simplify CPU type handling
Fix flash size
Fixed page-up / page-down in libopenui
* Add options to disable radio and model menu tabs.
- Update radio and model data structs
- UI for color LCD radios
- Convert existing 'noGlobalFunctions' property.
- Language strings.
* Make 'theme' control specific to color LCD radios.
* Add B&W radio UI.
* Simplify code, reduce compiled code size.
Fix page count display on model select tab.
Fix GVARS for 212x64 radios.
* Collapse timer sections if timer is off.
* Remove 'Use global functions' checkbox from B&W model setup.
* Make preflight checks, throttle and view options sections expand & collapse (default collapsed).
* Fix build.
* Add view options to companion data classes, save and load values in YAML files.
Fix scrolling for radio setup view options.
* Add Companion UI for view option settings.
* Remove 'Mixes' from list of tabs that can be hidden.
* Updated Companion UI from elecpower.
* Use view options flags to enable/disable functionality:
- skip heli mixer logic if heli not enabled
- Remove heli, gvars and telemetry options from source selection if not enabled
* Remove 'flight mode', 'curve' and 'global variable' settings from input & mix editors if option disabled.
* Rename 'View Options' to 'Enabled Features'.
Put GVAR option under Flight Mode and indent text.
Make relationship between FM and GV more obvious.
* Remove global variable option dependency on flight modes.
Hide FM1-FM8 in global variables if flight modes hidden.
* Hide 'Custom Mixer Scripts' in source selection menu popup if disabled.
* Add translation strings for Hebrew language file.
* Fix typo. Add comment for double call to setCurrentTab.
* Add layout 4+2B right side 3QRT+1QRT
* Fix Layout 4+2B LayoutId, length max 9 char
* Maybe this will work?
---------
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
* Change ThemeFile class to use generic YAML parser instead of hard wired code.
Fix handling of empty input lines in YAML parser.
Increase size of YAML parser variables to handle theme 'info' property length.
* Update comment.
* Fix error.
* Proper fix for blank lines in YAML file.
* Fix YAML blank line handling (attempt 3).
* Ensure theme YAML file is backward compatible.
* Store selected theme in radio settings instead of selectedtheme.txt file.
On start, if radio settings theme is empty, try and load from selectedtheme.txt file.
In Companion, save/load the selected theme in the radio settings YAML file; but no UI to select theme.
* Update selected theme name in radio.yml if the theme name was edited.
* Only save 'selectedTheme' in Companion on color LCD radios.
* Allow switches on the connected radio to control switches in the simulator via the joystick interface.
* Merge configurable radio joystick interface from banyaszg.
* Add two more 'axis' channels to companion.
* Fix 6POS from USB joystick to simulator.
* Reduce data size.
* Fix build error on B&W radios.
* Add 'Companion' button mode to work with the button logic in the Companion app.
* Build Companion joystick setup layout at runtime.
Change #define names for simulator joystick.
Allow 15 axes and 32 buttons.
Initial support for trim sliders.
* Remove custom joystick button type for companion - use 3 buttons per switch in companion to control simulator switch state.
* Fix joystick constructor calls parameters. Connect some radio joystick trims to simulator widgets.
* Restore 'companion' button type to reduce number of buttons needed. Make trims work via buttons in USB joystick.
* Connect joystick trim buttons to simulator widgets.
* Use companion source names for trims.
* Add encode / decode of usb joystick custom settings to Companion.
* Convert to lvgl layouts.
Update language files.
* Fix generated YAML storage files.
* Fix initialisation error when editing button channel. Cleanup code.
* Fix rebase.
* Fix refresh of joystick channel list view after editing an entry.
Companion joystick config window uses two columns.
* Fix vertical joystick inversion bug.
Change stick axis labels.
---------
Co-authored-by: Phil Mitchell <phil.a.mitchell@gmail.com>
* Elevate telemetry screen count from 5 to 10 on color radios.
* Cpn increase max custom screens
* fix(color): Missing Add tab button on max-1
addTab was not called when adding screens dynamically
---------
Co-authored-by: elecpower <neilh713@tpg.com.au>
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
* Model Labels Selector
* Portrait Layout
* Receiver ID Check
* Fix Labels .yml format
* Companion Initial Commit
commit 967ddf3979b4954402fe62c858faba4b7a416bba
Author: dlktdr <cblackburn320@gmail.com>
Date: Mon Aug 29 01:49:15 2022 -0700
Fix Labels .yml format
commit 534221cad9e01146c47a9ac1080a655e04f1f6c8
Author: dlktdr <cblackburn320@gmail.com>
Date: Mon Aug 29 01:20:57 2022 -0700
Receiver ID Check
commit f32c0939d44e9ae60bc0705a9176354c23fec198
Author: dlktdr <cblackburn320@gmail.com>
Date: Sun Aug 28 23:13:25 2022 -0700
Portrait Layout
commit 961181217c7841ff3f21299ac6aa419b810f80e9
Author: dlktdr <cblackburn320@gmail.com>
Date: Sat Dec 11 16:56:13 2021 -0800
Model Labels Selector
commit dc99dd40d2
Author: David PHAM-VAN <1387855+DavBfr@users.noreply.github.com>
Date: Fri Aug 26 03:04:34 2022 -0300
feat: Allow Lua widget to override built-in widget with same name (#2208)
* Allow CPP Widgets Override with LUA
* Reset a widget option it the type differs
commit 4b747caff9
Author: eshifri <46511024+eshifri@users.noreply.github.com>
Date: Thu Aug 25 19:47:53 2022 -0700
fix: Write model name into models.yml when duplicating model (#2224)
* Update model name in the models.yml file (#2214)
* Fix the length of the name.
commit e97f23a305
Author: eshifri <46511024+eshifri@users.noreply.github.com>
Date: Wed Aug 24 21:19:52 2022 -0700
fix(cpn): Fix full path to model notes for Simulator (#2223)
* Correct Highlighted Column
* labels .yml indentation
* Update da.h
New defines translated to Danish
* Update dataconstants.h
Omit warnings due to difference of LEN_MODEL_FILENAME and LEN_MODEL_NAME in modellist.cpp
* Update modelslist.cpp
Wonder if this are the right file in PR #1374 (?), seems a lot are changed to the better in #1374
* Update dataconstants.h
Restore #define for LEN_MODEL_FILENAME to 16
* Rebase, Correct Issues
Delete now deletes instead of select
New model stores correct information
Duplicate save all information in cell
Rework items to use cell over button
Reword function variables
* CMPN: Add context menu
Fix output not functional. Removed Yaml::null at some point :)
Fix some compiler warnings
* CMPN: Compiler warning, replace ,->_ in list
* FW: Various Changes
Change view to a grid
Don't allow comma in label name
Add scroll indicators
Save sort order
Co-authored-by: HThuren <99370924+HThuren@users.noreply.github.com>
* reduce risk of corrupt radio.yml #1412
Adds CRC16 checksum to radio.yml when saved.
Adds save to temporary file, folowed by rename to radio.yml
Adds check on load, with fall-back to temporary file
* Made sure that only the first read block of radio.yml is checked for the 'checksum' value.
Added checksum generation on radio.yml produced by conversion.
* Added namespace.
Github actions triggered build failed on this - compiler difference.
* Fixed typo in code not run locally.
* Made checksum result code a enum class.
Fixed null-poionter dereference bug.
* Added check and handling for radio.yml file not read (will be handled as if checksum failed)
Added evaluation of checksum when radio_new.yml is read.
Added f_unlink() calls before f_rename() to ensure the target filename does not exist.
* Added radio.yml cheksum handling to Simulator/Companion.
Cleaned radio firmware handling of checksum field up to be newline agnostic.
* Added handling of files without checksum.
- Letting files pass the check if no checksum field is present (old files) and the size is realistic (25 bytes)
* Fixed bug causing new conversion from binary if no radio.yml BUT a radio_new.yaml
is present in the filesystem.
Now the conversion is only performed if neither file exsits.
* repair rebase problems
* rerun yaml generator
* fix another rebase problem
* update text in companion to be more meaningful when the radio.yml file has a checksum error
fix wrong error message in trace
* add trigger to check radio config when leavin menu_radio
* fix: add handling for temporary and error yaml radio settings files to simu/simulator/libsimulator
* fix corner cases when comverting non crc-ed files
* chore: Tweak radio data warnings for screen sizes
- Changed the define to be a little shorter
- Added missing define for TW
- Three string lengths to suit 128, 212 and basically colorlcd
Co-authored-by: gagarinlg <malte@langermann.net>
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
* timer direction: ellapsed or left
* Add AUDIO announcement support
* Storage for showElapsed
* Translations
* Fix storage
* BW implementation
* Different BW implementation
* Companion support
* Color LCD implementation and rebase to lvgl
* Fix problems found by raphaelcoeffic
* chore: Regenerate the YAML files properly
* fix: Remove unused `TR_SHOW` remnant
* chore: Formatting and cleanup
* fix: Timer dir choice was shown in wrong place
Wrong newline used in ce23b50
* Fix cpn ui triggers, remove unnecessary code and some formatting
* fix(colorlcd): Hide timer dir opt if zero value
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
Co-authored-by: elecpower <neilh713@tpg.com.au>
