[stock] Port from a part of Andreas patch relative to timers. Thanks Andreas! It allowed me to implement the configurable beeps for timers at a almost 0 flash cost.
This change makes both weight and offset range bigger for all 32 possible mixers.
Instead of -125 to 125 now -245 to 245 is allowed for weight and offset in mixer.
No additional EEPROM is needed. Conversion of EEPROM follow soon...
Now the expo function is explained properly. Expo execution speed should be again better.
Codesaving this time only 8 bytes.
Added EXTENDED_EXPO define for a wider range of expo. So around 0 the curve is more flat and the edges increase faster. This change costs about 84 bytes.
I noticed the curve doesn't much change especially for smaller k values.
Now the range is extended. From 0 to 80 it gives the old curves from 0 to 100.
From 81 to 100 a higher raising curve is used. There is a small break between 80 to 81.
If this is a problem I can change it to be smooth and even less code size, but loose the old curve form.
I moved SLOW function back to old position, because it might be not a good idea if differential is actived, and the end positions are reached at different times. Therefore the smaller movement needs to be slower. Please try and test and report your opinion.
Please also test more about overruns. I was able to generate a overrun by added about 4x a 125% value with 125% offset. (output each above 200%, in total more than 800%) The overruns occurs earlier compared to original version. Could this cause a problem? I can change the internal calculation to be more like the original version, but would cost more flash.
Needs testing!!! Volunteer please come in.
Benefits of change:
-248 bytes code generated used gcc 4.7.2
-huge performance increase. My measurements:
simple mix goes down from 2,87msec to 1.93msec
middle complex mix goes down from 3,37msec to 2,00msec
complex mix (with phase change) goes down from 6,87msec to 4,18msec
[all] Expo function rewritten and many other flash savings (thanks Andreas)
[stock] LONG key press duration is longer
[stock] Rotary Encoder bugs fixed
[stock/gruvin9x] Play Both function added
!!! TRANSLATIONS ALL NEED TO BE UPDATED BEFORE NEXT RELEASE
Issue 193 fixed (PWM Backlight)
[stock] Rotary encoder bug fixes
[stock / '128 / gruvin9x] Play Both function. Translations needed, who wants to add them in all language files?
[stock] 40bytes flash saved
[ARM] No SD support after a Tx reboot on ARM flavors
[all] Issue 194 fixed (negative GVARS - on all boards!)
[all] Vario small change on center high limit
bsongis