* fix: pulse driver with 32bit timers
* fix(mpm): clear RX buffer before signature
* fix: add some debouncing on soft-serial start bit detection
This helps coping with spurious impulses on S.PORT created by payload sent over PPM pin (X10E).
* fix: whenever the RXNE bit is set, read the register
... regardless of errors. That allows for reducing the effect of detected errors.
* WiP: new module interface
* WiP: softserial timer DMA
* WiP: setup() and send() in one step
and remove methods specific to internal or external module
* fixes and extra port config
* horus targets
* module ports have moved
* T8 support (only internal module)
* fix nv14
* stupid GCC....
* disable BT
* remove nv14 telem driver
* remove old aux serial driver
* Move module buffers out of pulses.h
* Soft serial fixes and PXX1 support
* Fixed PPM module output
* Fixed CLI
* compilation fixes
* Ported bluetooth and flysky gimbal to new serial driver
* Re-enable soft-serial RX
* fixes and cleanup
* nv14 fixes
* Fix flysky gimbals
* Ghost module
* 16 bytes of RAM
* Remove getByte from module API
* Ghost cleanup
* fix: _half_duplex_input() must be called after usart init
* WiP
* more cleanup
* Remove board specific settings from PXX1 / PXX2 drivers
* A bit of PXX2 header cleanup
* Add support for OVER8 and ONEBIT
* Add some support for inverters (NV14 / EL18)
* Support NV14 power fixes in generic board
* Fix polarity handling
* Fix RX DMA
* Fix mixer not running
* Add soft-serial polarity control
* Quick fix for telemetry polling while module port is changed
* Fix bootloader DEBUG
* Fix MPM telemetry
* Fix pulse start
* DSM2 soft-serial fallback
* DSMP async module restart
* Fix CRSF LUA upstream
* Remove global variable telemetryProtocol
* Use HAL/LL constants
* Fix various issue with AFHDS3 and NV14/EL18 internal module
* Fixed S.PORT unit tests
* fix: update widx after writing at current index
* fix: init error condition
* Fix: possible infinite loop in _find_port()
* Add support for bidir S.PORT init
* Add support for "getLastByte" in HW serial driver
* PXX1: Add support for S.PORT based on IDLE callback
* Fix rebase error
* Fix softserial _rx_fifo_push()
* Add softserial support for waitForTxCompleted()
* Fix MPM flashing (internal / external)
* Fixed external MPM
* Activate RX DMA on internal module
Seems to work with serial passthrough without issues, at least on the L3R PRO.
* Fix softserial DMA on stdlcd F4 targets
* Add softserial support for 32bit timers (mostly TIM2)
* More precise soft-serial
* Fix MPM update using inverters & HW uart
* Raise S.PORT DMA/USART IRQ prio to achieve faster switching to input
* Remove useless delays
* Fix flashing external ELRS module
* Added a retry mechanism for FrSky S.PORT update
* Remove useless enableRx()
* External FrSky modules are all flashed via S.PORT
* Remove power management unit update
This was only used on the first batch of X-lite.
* fix: Get current values for MPM options
* fix: Don't show sub-proto dropdown when empty
* Add suggested call to `update()`
* Add callback to refresh when subtype changed
* Trip `SetValueHandler` rather than setting value
Thank you to @raphaelcoeffic for the hint ;)
* fix: Saving values when changed is a good idea!
* Load option flags properly when using internal proto list
* NumberEdit fields don't implement LV_EVENT_VALUE_CHANGED, use update() instead
* Fix checkbox behaviour
* Fix autobind checkbox after switching away from DSM
* Fix more parameter needing update on MPM sub-proto changes
* fix: Also update servo rate if present
* fix: Channel mapping needs updating also
Co-authored-by: Raphael Coeffic <raphael.coeffic@frafos.com>
* replaced fix strings with translations
* additional strings
* replaced wrong german string to english in all but german translations
* fixed spelling
* Hacky port of FRSKY_FIRMWARE_EXT update menu
More work is needed to integrate/test the remaining menu items
May just ba a matter of correct parameters for deviceFirmwareUpdate
* Functionalise, of sorts
* Formatting
* Functionalise more repeated update code
