[stock] Flash saving in AUDIO code. Warning, I had to change some VOICE prompt numbers, check the tts.py to know which ones!
[Taranis] DSM2 protocol added when compiling with DSM2=PPM
[all] The "bolded mixers" (bolded, and beeping if beep selected) follow these rules:
- when a mix has no trigger, it is always bolded
- when a mix doesn't apply to the current phase, it is not bolded, even during fade out (same for expos)
- when a mix is leaving with slow down, it is not bolded
- when there is a delay applied to a mix, it is bolded according to this delay
[stock] All the changes described above even allowed me to save 68 bytes flash and 38 bytes RAM!
As always when the Mixer is partially rewritten, a lot of tests are needed before the next release!
[all] Issue 28 fixed (10 beeps on countdown during the last 10 seconds)
[all] Issue 37 fixed (Pwr+) added
[all] Issue 39 fixed (Potscroll too slow)
[Taranis] Bug with delays on 3 states switches
[Taranis/sky9x/gruvin9x] Date & Time not always saved
[Taranis] WDT timeout adjustable when dealing with long delays without pulses (thanks Mike for the trick!)
[Taranis] After USB is disconnected, the SD and the EEPROM are read inside the main, not inside the interrupt
[Taranis] Removed dead code about CPU temperature
[stock] Flash saving (thanks Mike for your emails!)
[Taranis] RSSI/A1/A2 alarms
[Taranis] Better code when no pulses sent (internal or external module). Thanks Mike!
[Taranis] Correction on DEBUG serial code
[Taranis] Bitmap displayed in MODELSEL
[Taranis] Empty EEPROM is not calculated on each keypress in MODELSEL screen
[stock/stock128] Huge RAM saving (thanks Mike!)
[sky9x] Good register used for reboot cause
[Taranis] PPM Center Adjustable
[stock] Issue 225 fixed
[all] Throttle Inverted is now a Model parameter
[Taranis] Issue 15 fixed (when >5 GVARS)
[Gruvin9x] Issue 16 almost fixed
[all except '64] Trainer short and Trainer long in Custom Functions
[Taranis] No Haptic function
[Taranis] Overflow problem in playValue
[Taranis] EEPROM flushed and loaded again before / after USB connection
[sky9x / Taranis] Issue 1 fixed (PlayFile/Play were called from an interrupt). To be tested and re-tested
[all] FrSky alarms are not any more sent from the 10ms interrupt, but from the main loop. To be tested as well
[all] Font changes for the Custom Switches screen
[Taranis] Channel name in Mixes screen
[sky9x/Taranis] Negative AND switches in Custom Switches screen
[Taranis] Altitude displayed with PREC1
[Taranis] Correct SD size in massstorage
[Taranis] Unmount / Mount SD in massstorage
[Taranis] A1 / A2 displayed in Top Bar depending on Voltage source selected in Telemetry menu
[Taranis] No RSSI / Voltage in Top Bar if no RSSI
bsongis@gmail.com