* Support all current timezones.
* Fix function name and calculation for timezone offset.
* Allow setting any time offset value from -12 to +14 in 15 minutes increments.
* Alternate timezone editor in Companion (from elecpower).
* Fix compiler warning.
* chore: Add the T20
Add "hardware_defs" target to dump hardware defines from hal.h per target
Fixed hal.h definitions for switches & ADC inputs
Tools to generate hardware definitions from current hal.h
generator: add support for EXTx and analog switches
WiP
Add generated header to hardware_defs target
Add support for ADC input direction and index per GPIO port
Incredible: it compiles
Removed StdPeriph ADC driver
Works on QX7
Works on TX16S (VBat missing)
Switch driver using generated switches for stm32 targets
Switch driver with generated switches for simu
Use switch names from switch driver
Fixed single conversion handling
Fixed horus VBat reading
Added switch name
Fix warnings about bitfield offsets and GCC 4.4
This is caused by bitfields that cross type boundaries. In this particular case, it happens as the bitfield is not defined the same in `rtc_backup.cpp`.
Switches has already been moved to generic driver
Jitter measurement for each sample, not just for oversampled values
Moved periph clock init to the ADC driver
ADC & GPIOs.
Add switchInit() to init pins
Fix NV14 CMake
Fix taranis target
Fix NV14 (again)
Model audio files: use new interface for switch index
Fix X9-lite
Fix simu headers
Fix getSwitchName()
Add support for ADC switches
Fix switch warning YAML
Test only switches which are defined
Conversions tests for QX7 only on QX7
Fix X12S
Fix function switch names
Enable ADC periph clock before initialising channels
NV14: offset inputs for the sticks & fix switches
WiP: get rid of VSRCRAW and some more
Simu shall use normal ADC driver
fix x7
fix nv14
Fix 9x nav
fix 212x64
fix xlite
fix x9e
fix simu lib
fix unit tests
fix x7 tests
PWM stick values should be written directly into adcValues
... just like FlySky sticks.
fix x12s
fix nv14
Add some support for SPI ADC (only unit tests)
Remove `jq` usage
fix generate_yaml.py for newer libclang
fix pot config
fix stick names
Some YAML generator improvements
Max 16 Pots on COLORLCD
Fix some source names
Use 10 bits for switches to prevent overflow
Removed horus constants for switches & ADC inputs
Fix unit tests
Fix curve edit
Fix libsimulator
Fix function switches (tpro)
Refine ADC & analog API
Moved hardware definitions scripts and templates into own dir
cleanup API refine
Fix unit tests
Mixer: apply calibration only on required inputs
Place ADC switches after all other ADC inputs
Fix X12S
Remove useless TR_POTS_VSRCRAW, TR_SW_VSRCRAW, and TR_VSRCRAW
Cleanup redundant generated YAML parsers
Fixes Boxer rebase
Add boxer to generate-hw-defs.sh
Obsolete LUA exports
Add boxer ADC_DIRECTION
Split generate_hw_defs.py into multiple files
Some cleanup (+ LUA switches)
Fix AXIS definitions
Fixed translation strings declarations
Some rebase fixes
Remove some useless StdPeriph drivers
fix: set pin mode to reset state on usart deinit
fix: use canonical names for calibration data
fix: ADC driver does not care about unconfigured inputs
fix X12S ADC
Add support for ADC conversion chaining
Better X12S ADC implem
Moved X12S ADC driver to HAL/LL
Improve ADC driver separation
Fixed taranis & nv14
Moved PWM gimbals to HAL/LL
Removed useless TR_EXTRA_VSRCRAW
Fixed include guards
Small fixes
Renamed control inputs
Moved internal and external module pulse driver def to boards
Move more things to the generic_stm32 board
Remove STR_VMIXTRIMS
Added analog labels
Generate main control names
Misuse labels / short labels for main controls
Backward compatibility: sliders and legacy names
New keys driver
Let's get rid of StdPeriph headers in simu
Add jinja2 to CI workflows
Use `grep` instead of `sed`
chore: add python jinja2 oto msys setup script
Removed more static definitions and use dynamic ones instead
Fixes X9E
Fix x7 nav too
212 switch display
Fix default sliders
Removed NUM_STICKS
212 switch display working nicely
Surface radio 'stick' replacements
fix: switch, trim & rotary pin init
Remove old key drivers
Removed VKEYS
Removed ETX_FOURCC
Fixed SURFACE_NAME
Removed TR_VSWITCHES & TR_TRIMS_SWITCHES
Fix xpot switches
Store calibrated analogs in physical order
Use getSourceString in drawSource
Implement missing YAML read/write
Fix isSourceAvailableInInputs()
Fix isSourceAvailable()
Some surface fixes
Fix CLI debug
Ported colour UI of analog diagnostics to new ADC API
Small fixes
Better input mapping
Minor tpro fixes
Fix trims available
Remove TX mode choice on surface radio
Rename surface controls
Channel order alignement
Fix throttle warning
Fix checkTrims()
Fix pot config casting issue
Fix IS_SWITCH_FS()
Fixed input mapping
Fix fswitch auto-switch
Fixed storing / reading function switches in YAML
Fix enableVBatBridge() / disableVBatBridge()
Fix interesting mode conversion
Fix sources issues
Fix special funnction list
Proper function switch handling
128 GUI improvements
Fix compilation
Boxer cosmetics
128 hardware screen cosmetic
Fix TX12 switches
More switches fixes
Simplify CPU type handling
Fix flash size
Fixed page-up / page-down in libopenui
QT 5.11 finally removes the qt5_use_modules macro.
Instead target_link_libraries with the Qt5::Lib added should be used.
Since we already use that in one place, it should work everywhere. Since
the common companion lib already depends on Core, widges and multimedia
components that link against it, also implicitly link against those
libraries.
* [Companion] RawSourceRange: Fix for timers and RTC; Remove unused "single precision" flag and logic; Add logic for "short" timer handling.
* [Companion] Add TimerEdit class for editing negative times; Implement TimerEdit in LS, CF, and Telemetry (bars) editors;
* [Companion] Refactor LogicalSwitchesPanel for fewer & more efficient updates; Fix newly-added LS not being available in source lists; Fix bug with timer/rtc comparison values getting reset to value of spin box instead of time editor.
* Add forgotten #include.
* [Companion] LogicalSwitchesPanel: Update raw sources list upon screen refresh (fixes#5374); Improve data entry in spin boxes (fixes#5375).
* Make gcc happy.
* [Companion] Set proper RawSourceRange for GVars, trims, mixer scripts, and sticks/switches/cyclic/MAX.
* [Companion] Fix backwards precision/range logic on telemetry sensors offset spinbox; Fix other minor range issues with ratio & offset.
* [Companion] Remove short limit on min/max timer values for LS & telem. bars.
* Switch to TimerEdit in maxLibQt.
* Fix gcc build.
* Remove unused files.
* Caps fix.
* Move MultiposPots & MultiposPotsPositions capability lookups and getAnalogInputName() to Boards class.
* Add RawSource::isAvailable() and RawSwitch::isAvailable(); Add board type param to various RawSource lookup functions.
* Add CustomFunctionData::toString(), FlightModeData::toString(), FactoryInstalledPots board capability, MAX_SWITCH_TYPE, & break out GeneralSettings source/switch defaults to own function.
* Add RadioDataConversionState class for tracking conversion actions.
* Implement RadioDataConversionState handler, add conversion process report, and improve/fix conversion issues:
* Make sure all switches/pots/knobs have default configs for destination board type;
* Try to move more custom control names, intelligently;
* Convert model timers and throttle source;
* Adjust for Horus 6P switch in place of Taranis S2 knob;
* Adjust for extra sliders on X12 and X9E to move LS and RS to proper slots as needed;
* Make sure ALL controls are validated, eg. to always account for extra trims/analogs/switches/etc which don't exist on destination;
* Properly indicate invalid RawSource::toString() items with "???".
* Allow user to cancel out of file conversions & provide ample warnings if switching radio type/profile with unsaved file(s) still open;
Also: Fix bug with some orphaned MdiChild windows never being deleted; Create static bool Storage::isBoardCompatible(b1, b2).
* Add maxLibQt "stub" (will not compile).
* Add ExportableTableView for better presentation of conversion results table.
* Move getFourCC() and isBoardCompatible() to Boards class.
* [Simulator] Refactor CLI option parsing to use QCommandLineParser, remove QxtCommandOptions external lib; Add "--sd-path" and "--start-with" options; Qualify all translatable text (SimulatorMain context).
* Add date string to version.
* Files moved to thirdparty directory
* Miniz library added
* Unused simulators removed: er9x, th9x, ersky9x
* Example of opening archive file .eepe2 (File->Open)
* File reorganization, bunch of files moved to storage directory
* Added StorageSdcard class to handle storage for radios that use SD card to store radio settings and models
