* SF Audio amplifier mute port to 2.10
* added missing definition STR_SF_DISABLE_AUDIO_AMP
* exclude radios not able to switch audio amp off
* radio/src/storage/yaml/yaml_datastructs_128x64.cpp needs to distinguish between radios with or without switchable audio amps. Expample Zorro vs X9lites
* updated companion and radio language PL
* - added Companion and radio language SE
- removed type unfinished for translated languages
* added radio and companion language JP
* - reverted change to 128x64 yaml_datastructs.h
- moved exclusion of SF DISABLE_AUDIO_AMP based on hw capabilities to UI level
* confused FUNC_ with FUNCTION_
* confused FUNCTION_* with FUNC_*
* chores(flysky): separate AFHDS2A and AFHDS3 into 2 different module type
This should allow to remove some of the hacks added earlier.
* chore: Add some EL18 CI bits
* fix(afhds): cmake defs
* fix(ci): add el18 to commit-tests.sh
* chore(cpn): separate AFHDS2A and AFHDS3
* chore(cpn): remove binary import of afhds and legacy fxFreq field for afhds3
* fix(cpn): limit available internal afhds protocols to those supported by hardware
* chore(cpn): update Flysky int module test
* fix(cpn): compile error
* fix(cpn): afhds2a max channels
* fix: TR_MODULE_PROTOCOLS
* enh(cpn): more support for afhds2a and 3
* fix(cpn): rebase compile error
* fix(cpn): bit indexes
* fix(cpn): emi toString
* fix(cpn): limit available internal afhds protocols to those supported by hardware
* enh(cpn): add support for Flysky EL18
* fix(cpn): available protocols
* fix(cpn): rebase moduledata
* chore(cpn): add module fields to model print
* Separate AFHDS2A and AFHDS3 UI settings.
* Fix AFHDS3 conversion from old subtype value.
Fix 'Channel Range' layout on portrait LCD.
* Fix name.
---------
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
Co-authored-by: elecpower <neilh713@tpg.com.au>
Co-authored-by: Phil Mitchell <phil.a.mitchell@gmail.com>
* initial version of clickable checklist
* do not display checkboxes for empty lines if checklist is shorter than screen size
* remove checklist exit after completing it
cannot exit menu from menuTextView as level above there is while loop that cannot be stopped from thic place in code
* menu entry to enable and disable interactive checklist
* only when complete interactive checklist is closed
* config updated & not display checkboxes when entered from "View Notes"
* add setup entry for colorlcd
* do not make interactive checkist when loaded from menu
* fix datastruct size after merge
* Companion support for interactive checklist
* mark checklist lines as non-checkable with '=' for B&W radios
* Process only items visible on screen
This is also crucial when it comes to analyse non-checkable items on a checklist, as in this way there is no need to load non-visible items from SD-card
* WIP fix merge problems
* update yaml datastructs
* restore most functionalities for interactive check lists on color LCD radios
currently no automatic line wrapping and you can always exit the checklist, even when it is not fully done
* finalise interactive checklists for color LCD
* fix: rebase/merge issues
* fix: model setup checklist section
* fix: fix 212 model setup
* Re-work of the some of the color lcd checklist code (#3787)
* Move checklist logic to sub-class.
Show model name instead of file name in title, show 'Preflight checks' in title2 for checklist.
Handle long line wrapping of text.
Don't indent lines without checkbox.
Add 'RTN' button when done.
* Code cleanup.
* Simplify code by storing a list of checkboxes instead of scanning LVGL object hierarchy.
* Indent checkboxes to make touch activation easier.
Keep 'RTN' button visible so last checkbox is further from bottom of screen (for touch activation).
'RTN' button is disabled until checklist complete.
* Add checkbox class constructor for preflight checks.
* Fix checkbox size.
---------
Co-authored-by: Piotr Rzeszut <piotrrze@gmail.com>
Co-authored-by: 3djc <lesitewebdejc@hotmail.com>
Co-authored-by: philmoz <philmoz@users.noreply.github.com>
Co-authored-by: Phil Mitchell <phil.a.mitchell@gmail.com>
* feature request #1635
- added MIN (-MAX -> -1024) as source
* fix rebase
* fix rebase
* change to use language strings for MIN/MAX instead of instance
updated CN and TX language file for MIN use -RESX for MIN instead of magi number code cleanup
* updated test sources
* updated JP language
* JP language: changed translation text
* updated HE language translations
* fix: Prevent functional degradation if SD has less than 50MB free space (#3730)
* justification: https://github.com/EdgeTX/edgetx/discussions/3666
- checks SD card free space at startup, start of logging and writing screenshots
- issues warning to user if SD card has less than 50MB free space
- will not write logs or screenshots if free space is less than 50MB at activation timerReset
- fixes crash of warning popup in logs.cpp (#3728)
* update: warning message if SD card fills up to threshold while logging
* empty commit
* call popup in non-blocking mode
* make b&w compatible to non-blocking popup calls
* 2nd attempt
* Popup:
- turns on backlight if dimmed due to inactivity setting
- if backlight is dimmed due to inactivity setting backlight can turnd on again by any controls
* #3599
* fixed b&w UI
* updated languages CN, CZ, DA, DE, FR, HE, IT, PL, PT, SE, TW
* chore: Update translations
* chore: Remove magic number
* chore: JP language update for SD card full (#3809)
* fix: Don't spam simulator log with file close msgs
---------
Co-authored-by: Michael <mha1@users.noreply.github.com>
* Enable startup splash screen duration for color LCD radios.
Add option to disable startup sound.
Add Companion support for changes.
* Add translation string for Hebrew language file.
* Fix rebase.
* chore: Add T20
* Update translations.
* Update translations.
* Update translations.
* Update translations.
* Right justify radio setup controls.
* Use longer translations for all radios.
* Enable splash screen timeout for NV14/EL18.
* Suspend watchdog timer to prevent EM if long splash display time selected.
* Simplify SPLASH_TIMEOUT code.
* Use WDG_RESET instead of watchdogSuspend.
---------
Co-authored-by: Phil Mitchell <phil.a.mitchell@gmail.com>
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
Add "hardware_defs" target to dump hardware defines from hal.h per target
Fixed hal.h definitions for switches & ADC inputs
Tools to generate hardware definitions from current hal.h
generator: add support for EXTx and analog switches
WiP
Add generated header to hardware_defs target
Add support for ADC input direction and index per GPIO port
Incredible: it compiles
Removed StdPeriph ADC driver
Works on QX7
Works on TX16S (VBat missing)
Switch driver using generated switches for stm32 targets
Switch driver with generated switches for simu
Use switch names from switch driver
Fixed single conversion handling
Fixed horus VBat reading
Added switch name
Fix warnings about bitfield offsets and GCC 4.4
This is caused by bitfields that cross type boundaries. In this particular case, it happens as the bitfield is not defined the same in `rtc_backup.cpp`.
Switches has already been moved to generic driver
Jitter measurement for each sample, not just for oversampled values
Moved periph clock init to the ADC driver
ADC & GPIOs.
Add switchInit() to init pins
Fix NV14 CMake
Fix taranis target
Fix NV14 (again)
Model audio files: use new interface for switch index
Fix X9-lite
Fix simu headers
Fix getSwitchName()
Add support for ADC switches
Fix switch warning YAML
Test only switches which are defined
Conversions tests for QX7 only on QX7
Fix X12S
Fix function switch names
Enable ADC periph clock before initialising channels
NV14: offset inputs for the sticks & fix switches
WiP: get rid of VSRCRAW and some more
Simu shall use normal ADC driver
fix x7
fix nv14
Fix 9x nav
fix 212x64
fix xlite
fix x9e
fix simu lib
fix unit tests
fix x7 tests
PWM stick values should be written directly into adcValues
... just like FlySky sticks.
fix x12s
fix nv14
Add some support for SPI ADC (only unit tests)
Remove `jq` usage
fix generate_yaml.py for newer libclang
fix pot config
fix stick names
Some YAML generator improvements
Max 16 Pots on COLORLCD
Fix some source names
Use 10 bits for switches to prevent overflow
Removed horus constants for switches & ADC inputs
Fix unit tests
Fix curve edit
Fix libsimulator
Fix function switches (tpro)
Refine ADC & analog API
Moved hardware definitions scripts and templates into own dir
cleanup API refine
Fix unit tests
Mixer: apply calibration only on required inputs
Place ADC switches after all other ADC inputs
Fix X12S
Remove useless TR_POTS_VSRCRAW, TR_SW_VSRCRAW, and TR_VSRCRAW
Cleanup redundant generated YAML parsers
Fixes Boxer rebase
Add boxer to generate-hw-defs.sh
Obsolete LUA exports
Add boxer ADC_DIRECTION
Split generate_hw_defs.py into multiple files
Some cleanup (+ LUA switches)
Fix AXIS definitions
Fixed translation strings declarations
Some rebase fixes
Remove some useless StdPeriph drivers
fix: set pin mode to reset state on usart deinit
fix: use canonical names for calibration data
fix: ADC driver does not care about unconfigured inputs
fix X12S ADC
Add support for ADC conversion chaining
Better X12S ADC implem
Moved X12S ADC driver to HAL/LL
Improve ADC driver separation
Fixed taranis & nv14
Moved PWM gimbals to HAL/LL
Removed useless TR_EXTRA_VSRCRAW
Fixed include guards
Small fixes
Renamed control inputs
Moved internal and external module pulse driver def to boards
Move more things to the generic_stm32 board
Remove STR_VMIXTRIMS
Added analog labels
Generate main control names
Misuse labels / short labels for main controls
Backward compatibility: sliders and legacy names
New keys driver
Let's get rid of StdPeriph headers in simu
Add jinja2 to CI workflows
Use `grep` instead of `sed`
chore: add python jinja2 oto msys setup script
Removed more static definitions and use dynamic ones instead
Fixes X9E
Fix x7 nav too
212 switch display
Fix default sliders
Removed NUM_STICKS
212 switch display working nicely
Surface radio 'stick' replacements
fix: switch, trim & rotary pin init
Remove old key drivers
Removed VKEYS
Removed ETX_FOURCC
Fixed SURFACE_NAME
Removed TR_VSWITCHES & TR_TRIMS_SWITCHES
Fix xpot switches
Store calibrated analogs in physical order
Use getSourceString in drawSource
Implement missing YAML read/write
Fix isSourceAvailableInInputs()
Fix isSourceAvailable()
Some surface fixes
Fix CLI debug
Ported colour UI of analog diagnostics to new ADC API
Small fixes
Better input mapping
Minor tpro fixes
Fix trims available
Remove TX mode choice on surface radio
Rename surface controls
Channel order alignement
Fix throttle warning
Fix checkTrims()
Fix pot config casting issue
Fix IS_SWITCH_FS()
Fixed input mapping
Fix fswitch auto-switch
Fixed storing / reading function switches in YAML
Fix enableVBatBridge() / disableVBatBridge()
Fix interesting mode conversion
Fix sources issues
Fix special funnction list
Proper function switch handling
128 GUI improvements
Fix compilation
Boxer cosmetics
128 hardware screen cosmetic
Fix TX12 switches
More switches fixes
Simplify CPU type handling
Fix flash size
Fixed page-up / page-down in libopenui
* translated_theme_text
* translated theme text
* translated theme text
* translated theme text
* translated theme text
Changes to allow direct use of translation strings for all theme text, as per code from @philmoz
* Some minor changes
* Proper translations for CZ,DA,DE,FR,HE,IT,JP,PL
* Translations for CN,TW
* Minor correction
