piotr/edgetx-gx12
1
0
Fork 0
Code Issues 2 Pull Requests Actions Packages Projects Releases Wiki Activity
960 Commits 2 Branches 0 Tags
95170b5930adfc8222a6f60e92b3cc0fdc3ce105
Commit Graph
54 Commits
Author SHA1 Message Date
bsongis 95170b5930 [ersky9x] rotary encoders inversion 
RE1 and RE2 renamed as REa and REb (will be needed for Flight Phases uses)
 2012-07-11 13:21:03 +00:00
rob@marotori.com d1425e77a9 Fix so encoder works on ARM & PCB4 board. 2012-07-11 11:31:51 +00:00
bsongis 0beaadc2e5 Free EEPROM = available + temp - current model 
Low EEPROM warning displayed on model change
[ersky9x] Rotary Encoder
 2012-07-11 10:40:20 +00:00
bsongis fa4e1e4fc0 No more alert for EEPROM overflow 
Trims buttons don't modify trim position on release
[ersky9x] Audio stopped sometimes without reason
 2012-07-10 13:37:55 +00:00
bsongis cb073fa549 Audio system on ersky9x ... another rewrite 
Some flash saved on stock
GPS calculations flash saving (around 100bytes, needs to be tested)
 2012-07-06 13:09:29 +00:00
bsongis 4505d886f6 [UP] + [DOWN] = default value 
[UP] + [RIGHT] = max value
[LEFT] + [DOWN] = min value
If KILRAH defined in menus.cpp
 2012-06-30 09:00:01 +00:00
bsongis 6b6c945f59 Bold introduced in many menus 
PlayTrack for ersky9x
Volume for ersky9x
Names for Mixes and Expos
 2012-06-29 17:17:48 +00:00
bsongis fb493b5415 SD-Card corrections on ersky9x board 
Status line
FatFs on simu
 2012-06-21 18:40:55 +00:00
bsongis 777f48121b CooCox on ARM 
New option THR_TRACE to save flash and RAM on Stock board
DMA used for SD-Card
CMD16 command added for block length = 512 bytes
 2012-06-19 22:49:48 +00:00
bsongis 249e6f2e63 Flash saving. SD card work (for gruvin9x / ersky9x boards) 2012-05-29 17:06:40 +00:00
bsongis 925d661640 New warning screens 2012-05-23 20:15:12 +00:00
bsongis dceec43442 Option GRAPHICS=YES/NO introduced for checkboxes and sliders (today it uses 144bytes) 2012-05-22 07:33:35 +00:00
bsongis bc0958f436 Checkboxes instead of OFF / ON 2012-05-21 20:09:58 +00:00
bsongis 14f0f7ca10 Slider for beep length and haptic length. Thanks dvogonen for the idea and the screenshot! 2012-05-16 15:16:52 +00:00
bsongis ff878bf884 THR Warn bug fixed. 2012-05-11 19:21:27 +00:00
bsongis 46d6a8196b Idea from Kilrah. To be discussed. For AutoSwitch is not bad. 2012-05-07 19:19:20 +00:00
mihlit@mihlit.cz 4724ccc780 rotary encoder used in menu did not keep light on 2012-05-07 11:30:07 +00:00
bsongis 597d201b30 Auto Switch function (only in Flight Phases now) 2012-05-06 21:41:41 +00:00
bsongis e100ddfd8c SD card Models storage now complete, including scroll in Models List! 2012-04-21 17:50:47 +00:00
bsongis 4796acbd49 Bug in Rotary Encoders navigation (when choosing the Rotary Encoder with the Rotary Encoder ...) 2012-04-21 14:08:12 +00:00
bsongis 9bc18d1888 400bytes flash saved in GeneralMenus + ModelMenus 
On V4.1 board both Rotary Encoder may be used for navigation
TX/RX RSSI set to 0 when no telemetry received since too long
 2012-04-20 17:03:16 +00:00
bsongis 3967d82a28 Option UNITS=IMPERIAL added 
SD card archive function continued (doesn't delete the model until function finished)
Alternate view for outputs in Main Views (Bars and Numbers)
GPS speed was badly displayed (ap instead of bp)
 2012-04-19 17:03:51 +00:00
bsongis abd4de973b Makefile option renamed (EXTRA_ROTARY_ENCODERS) 
Fixed a bug with option EXTRA_ROTARY_ENCODERS: mixes shifted after REb
30 models when open9x / gruvin9x board
LIMITS min and max range fixed
 2012-04-15 22:34:39 +00:00
bsongis 6bc2ddc3d4 Issue 19 solved 
Revert the last Haptic changes (was unfinished, no more spare time during the week-end, sorry!)
Revert my last modification on main views (offset not displayed in Bar Graphs, I was wrong)
PPM Center now configurable for each servo
No mean on the Batt voltage when in the calibration menu to have a faster response when calibrating
SD card Backup / Restore Models feature started
Some french translations fixed
 2012-04-14 11:32:40 +00:00
bsongis 10a29a676e Bug in Mixer when offset used with a switch + slow down 
GPS displayed as ---- when there has no fixed received since beginning
No Custom telemetry screen displayed when nothing to display
Marks at -100 and +100 when editing a value
RSSI alarms 1 + 2 labels were wrong
ANAS menu redesigned
60 models on ersky9x board
Current calibration on ersky9x board
 2012-04-10 18:20:51 +00:00
bsongis e7eaced156 Soft Power Switch on both v4.1 and ersky9x boards 
Delay before effective EEPROM write on these boards
Current displayed
 2012-03-30 16:03:43 +00:00
bsongis 8d30efddc5 Refactoring 2012-03-22 14:22:57 +00:00
bsongis a7a530487b Vario (still untested). Flash savings. 2012-03-20 18:48:05 +00:00
bsongis 040160efc9 New EEPROM format 205 
Introduction of differential in Mixers
Introduction of Switches as Mixer Source (FULL now removed)
Negative curves in Mixers
Optimizations in Mixer
Extended chars for localization
Swedish translations
Beep length updated
 2012-03-04 17:25:35 +00:00
bsongis 6c1d0cab8a Flash saving (idea from er9x) 
Trims2Offsets function removed as it was as full of bugs than other firmwares (total = ~1000bytes flash saved)
A "Safety CHxx" function is not applied when it is currently edited
The Stick Mode needs confirmation before being used (now edited with [MENU] edit [MENU]).
 2012-02-27 18:52:29 +00:00
bsongis e9dc2e26aa Pat Mackenzie added to the coders list as suggested by Mike in 9xforums 2012-02-27 07:33:11 +00:00
bsongis 76406f1f9c Some new fields now inflight modifiable: DR/EXPOS expo / weight, MIXER weight / offset 2012-02-22 17:56:38 +00:00
bsongis cdc2beb202 Bug when editing phase names with Rotary Encoder 2012-02-21 21:47:46 +00:00
bsongis f71eb46023 Inflight parameters modification. 
Last Telemetry parameters still displayed even if NO DATA (after something has been received)
 2012-02-19 23:08:01 +00:00
bsongis 33e30b8fef Inflight parameters modification using Rotary Encoder on v4 (not finished yet). 2012-02-18 08:58:05 +00:00
romolo.manfredini@gmail.com 63edd26442 Fix compilation problems 2012-02-17 18:47:55 +00:00
bsongis 26f1a5706b Another 100bytes flash saved + 16bytes RAM in LIMITS menu. 2012-02-17 18:12:01 +00:00
bsongis a8167c5e0c A little commit between two snow balls fight to warm the hands: this is the way that Cam proposed to exit submenus with Rotary Encoders. Still remaining: the Curve submenu. Ideas needed ;) 2012-02-17 15:11:02 +00:00
bsongis 1ed8d7ca44 Compilation problem when !FRSKY 
Rotary encoder navigation on v4
Some cleaning on code
 2012-02-16 22:40:02 +00:00
bsongis 2204c7523a Copyright notice updated 2012-02-10 16:33:08 +00:00
mihlit@mihlit.cz acd523e699 make code compatible with up-to-date build environment 
These changes make it possible to compile open9x with old (avr-gcc 4.3.3, 
avr-libc 1.6.7) and up-to-date (avr-gcc 4.6.2, avr-libc 1.8.0) build
environments. See Issue 1 for more details.
 2012-02-02 11:23:38 +00:00
bsongis e6d8648074 NMEA and ARDUPILOT code ported from er9x 
DSM2(PPM) bug fixed
Flash saving
PCBV3 removed
One delay_us(7) removed
BEEPSPKR becomes AUDIO
 2012-01-27 18:58:59 +00:00
bsongis a8ec3ddaa7 Audio port from er9x (thanks Rob!) 2012-01-26 20:15:45 +00:00
bsongis c651917da8 Some rename to open9x 2012-01-18 21:39:45 +00:00
bsongis 9cdf70f9d8 open9x translations 2012-01-18 20:24:15 +00:00
bsongis e92ed21627 Translations mechanism 2012-01-17 18:12:18 +00:00
bsongis 352b04302a Simu for V4. First draft of rotary encoders use in menus 2011-12-03 16:40:36 +00:00
bsongis c38cb2e0ff Progress circle in all menus 2011-11-26 22:30:00 +00:00
bsongis 5e633363a9 EEPROM async write bug solved. Progress bar. Popup on MODELSEL. Simu EEPROM async write. 2011-11-26 12:55:00 +00:00
bsongis 2b4823ab84 Last changes to gruvin9x 2011-11-17 21:35:33 +00:00