* fix: YAML timer handling
* chore: improve YAML set timer handling
* chore: improve timer handling
* feat: only offer defined timer for set and reset functions
* feat: only offer defined timer for set and reset functions (bw)
* chore: cosmetics
Add "hardware_defs" target to dump hardware defines from hal.h per target
Fixed hal.h definitions for switches & ADC inputs
Tools to generate hardware definitions from current hal.h
generator: add support for EXTx and analog switches
WiP
Add generated header to hardware_defs target
Add support for ADC input direction and index per GPIO port
Incredible: it compiles
Removed StdPeriph ADC driver
Works on QX7
Works on TX16S (VBat missing)
Switch driver using generated switches for stm32 targets
Switch driver with generated switches for simu
Use switch names from switch driver
Fixed single conversion handling
Fixed horus VBat reading
Added switch name
Fix warnings about bitfield offsets and GCC 4.4
This is caused by bitfields that cross type boundaries. In this particular case, it happens as the bitfield is not defined the same in `rtc_backup.cpp`.
Switches has already been moved to generic driver
Jitter measurement for each sample, not just for oversampled values
Moved periph clock init to the ADC driver
ADC & GPIOs.
Add switchInit() to init pins
Fix NV14 CMake
Fix taranis target
Fix NV14 (again)
Model audio files: use new interface for switch index
Fix X9-lite
Fix simu headers
Fix getSwitchName()
Add support for ADC switches
Fix switch warning YAML
Test only switches which are defined
Conversions tests for QX7 only on QX7
Fix X12S
Fix function switch names
Enable ADC periph clock before initialising channels
NV14: offset inputs for the sticks & fix switches
WiP: get rid of VSRCRAW and some more
Simu shall use normal ADC driver
fix x7
fix nv14
Fix 9x nav
fix 212x64
fix xlite
fix x9e
fix simu lib
fix unit tests
fix x7 tests
PWM stick values should be written directly into adcValues
... just like FlySky sticks.
fix x12s
fix nv14
Add some support for SPI ADC (only unit tests)
Remove `jq` usage
fix generate_yaml.py for newer libclang
fix pot config
fix stick names
Some YAML generator improvements
Max 16 Pots on COLORLCD
Fix some source names
Use 10 bits for switches to prevent overflow
Removed horus constants for switches & ADC inputs
Fix unit tests
Fix curve edit
Fix libsimulator
Fix function switches (tpro)
Refine ADC & analog API
Moved hardware definitions scripts and templates into own dir
cleanup API refine
Fix unit tests
Mixer: apply calibration only on required inputs
Place ADC switches after all other ADC inputs
Fix X12S
Remove useless TR_POTS_VSRCRAW, TR_SW_VSRCRAW, and TR_VSRCRAW
Cleanup redundant generated YAML parsers
Fixes Boxer rebase
Add boxer to generate-hw-defs.sh
Obsolete LUA exports
Add boxer ADC_DIRECTION
Split generate_hw_defs.py into multiple files
Some cleanup (+ LUA switches)
Fix AXIS definitions
Fixed translation strings declarations
Some rebase fixes
Remove some useless StdPeriph drivers
fix: set pin mode to reset state on usart deinit
fix: use canonical names for calibration data
fix: ADC driver does not care about unconfigured inputs
fix X12S ADC
Add support for ADC conversion chaining
Better X12S ADC implem
Moved X12S ADC driver to HAL/LL
Improve ADC driver separation
Fixed taranis & nv14
Moved PWM gimbals to HAL/LL
Removed useless TR_EXTRA_VSRCRAW
Fixed include guards
Small fixes
Renamed control inputs
Moved internal and external module pulse driver def to boards
Move more things to the generic_stm32 board
Remove STR_VMIXTRIMS
Added analog labels
Generate main control names
Misuse labels / short labels for main controls
Backward compatibility: sliders and legacy names
New keys driver
Let's get rid of StdPeriph headers in simu
Add jinja2 to CI workflows
Use `grep` instead of `sed`
chore: add python jinja2 oto msys setup script
Removed more static definitions and use dynamic ones instead
Fixes X9E
Fix x7 nav too
212 switch display
Fix default sliders
Removed NUM_STICKS
212 switch display working nicely
Surface radio 'stick' replacements
fix: switch, trim & rotary pin init
Remove old key drivers
Removed VKEYS
Removed ETX_FOURCC
Fixed SURFACE_NAME
Removed TR_VSWITCHES & TR_TRIMS_SWITCHES
Fix xpot switches
Store calibrated analogs in physical order
Use getSourceString in drawSource
Implement missing YAML read/write
Fix isSourceAvailableInInputs()
Fix isSourceAvailable()
Some surface fixes
Fix CLI debug
Ported colour UI of analog diagnostics to new ADC API
Small fixes
Better input mapping
Minor tpro fixes
Fix trims available
Remove TX mode choice on surface radio
Rename surface controls
Channel order alignement
Fix throttle warning
Fix checkTrims()
Fix pot config casting issue
Fix IS_SWITCH_FS()
Fixed input mapping
Fix fswitch auto-switch
Fixed storing / reading function switches in YAML
Fix enableVBatBridge() / disableVBatBridge()
Fix interesting mode conversion
Fix sources issues
Fix special funnction list
Proper function switch handling
128 GUI improvements
Fix compilation
Boxer cosmetics
128 hardware screen cosmetic
Fix TX12 switches
More switches fixes
Simplify CPU type handling
Fix flash size
Fixed page-up / page-down in libopenui
* Add support for the '1x' repeat option for 'Play Script' special functions.
* Add Companion and B&W radio support.
* Fix B&W radio logic and layout.
* Add translation hooks.
* fixes https://github.com/EdgeTX/edgetx/issues/2965
Changes:
- the log period range is now 0.1s to 25.5s
- upon creation of a new SD Logs SF the period is initialized to 1.0s
- text "Value" is changed to "Period" to indicate parameter represents the log period
ToDo:
- translations for "Period" if desired
rebase due to #2992
* changed Period to Interval
Added translations for DA, DE, EN, IT, PL
* added defaults for TR_INTERVAL to language files
* fixed problem with too many leading zeros for intervals less than 1s.
before: 00.5s
after: 0.5s
* added CZ translations for TR_PERIOD and TR_INTERVAL
changed EN TR_FUNC from "Func" to "Function"
* updated TR_FUNC for CZ, DA, IT, JP, PL
updated TR_PERIOD and TR_INTERVAL for JP
* added TR_PERIOD, TR_INTERVAL, TR_FUNC for SE
* implemented TR_SF_SWITCH and logic to change between TR_SWITCH and TR_SF_SWITCH
* 212x64 radios: single source for #define TR_LSW_HEADERS in language files
deleted redundant defines
* changed 128x64 and 212x64 SF SD Logs to same logic as colorlcd with
- minimum log interval 0.1s
- maximum log interval 25.5s
- default log interval 1.0s
TX12_Sim and X9D_Sim tested ok
* migrated functional changes due to PR #2992
* missed updating TW language file
* fix: Always `STR_SF_SWITCH` regardless of SF
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
* [firmware][ARM] Adjust some value limits for mix sources and update editing UI for LSs, CFs, & telem. bars:
* Increase timer limits to +/-8:59:59 when used with LSs, CFs, & bars;
* Increase Lua script output limits to +/-30K;
* Trim limits based on extended limit model setting;
* Limit TX voltage to 25.5;
* Limit TX time comparison value to 29:59m;
* Use proper GVar limits (user-configured), display precision, & unit in LSs & telem. bars;
* Display timer values properly with hours (instead of mmm:ss).
* [firmware] getTimerString() would fail with times >= 100min if hours weren't shown.
* Fix builds w/out GVars.
