Commit Graph
18 Commits
Author SHA1 Message Date
Raphael CoefficandGitHub 72193eda82 chore: New module/serial API (#3055)
* WiP: new module interface

* WiP: softserial timer DMA

* WiP: setup() and send() in one step

and remove methods specific to internal or external module

* fixes and extra port config

* horus targets

* module ports have moved

* T8 support (only internal module)

* fix nv14

* stupid GCC....

* disable BT

* remove nv14 telem driver

* remove old aux serial driver

* Move module buffers out of pulses.h

* Soft serial fixes and PXX1 support

* Fixed PPM module output

* Fixed CLI

* compilation fixes

* Ported bluetooth and flysky gimbal to new serial driver

* Re-enable soft-serial RX

* fixes and cleanup

* nv14 fixes

* Fix flysky gimbals

* Ghost module

* 16 bytes of RAM

* Remove getByte from module API

* Ghost cleanup

* fix: _half_duplex_input() must be called after usart init

* WiP

* more cleanup

* Remove board specific settings from PXX1 / PXX2 drivers

* A bit of PXX2 header cleanup

* Add support for OVER8 and ONEBIT

* Add some support for inverters (NV14 / EL18)

* Support NV14 power fixes in generic board

* Fix polarity handling

* Fix RX DMA

* Fix mixer not running

* Add soft-serial polarity control

* Quick fix for telemetry polling while module port is changed

* Fix bootloader DEBUG

* Fix MPM telemetry

* Fix pulse start

* DSM2 soft-serial fallback

* DSMP async module restart

* Fix CRSF LUA upstream

* Remove global variable telemetryProtocol

* Use HAL/LL constants

* Fix various issue with AFHDS3 and NV14/EL18 internal module

* Fixed S.PORT unit tests

* fix: update widx after writing at current index

* fix: init error condition

* Fix: possible infinite loop in _find_port()

* Add support for bidir S.PORT init

* Add support for "getLastByte" in HW serial driver

* PXX1: Add support for S.PORT based on IDLE callback

* Fix rebase error

* Fix softserial _rx_fifo_push()

* Add softserial support for waitForTxCompleted()

* Fix MPM flashing (internal / external)

* Fixed external MPM

* Activate RX DMA on internal module

Seems to work with serial passthrough without issues, at least on the L3R PRO.

* Fix softserial DMA on stdlcd F4 targets

* Add softserial support for 32bit timers (mostly TIM2)

* More precise soft-serial

* Fix MPM update using inverters & HW uart

* Raise S.PORT DMA/USART IRQ prio to achieve faster switching to input

* Remove useless delays

* Fix flashing external ELRS module

* Added a retry mechanism for FrSky S.PORT update

* Remove useless enableRx()

* External FrSky modules are all flashed via S.PORT

* Remove power management unit update

This was only used on the first batch of X-lite.
2023-02-09 19:44:32 +10:00
Raphael CoefficandRaphael Coeffic f952c5f7c7 Internal and external module buffers are now private 2022-08-11 12:15:46 +02:00
RistoandGitHub cdef0d6baf improvement: Change VCP to USB-VCP in the UI (#1849) 2022-04-19 14:20:30 +10:00
Raphael Coeffic 074a141d81 UI improvements 2022-03-20 16:30:58 +01:00
Raphael Coeffic b39baa2360 Use USB VCP as a normal serial driver as well 2022-03-20 16:22:14 +01:00
Raphael Coeffic 530d395204 WiP 2022-03-20 16:22:14 +01:00
Raphael CoefficandRaphael Coeffic f3301e6210 Added control line and bitrate callbacks
And some additional clean-up
2021-11-21 11:18:35 +01:00
Raphael CoefficandRaphael Coeffic aa7b0143bd Add active polling on UART buffer and bigger USB buffers 2021-11-21 11:18:35 +01:00
Raphael CoefficandRaphael Coeffic 96743a9fc4 PoC: connect USB/serial ISR directly to the respective serial send
This assumes that USB IRQ has a lower logical prio as the UART IRQ so that it can be pre-empted by the USART ISR.
2021-11-21 11:18:35 +01:00
Raphael CoefficandRaphael Coeffic 73790c1654 Use FreeRTOS stream buffers and task notifications 2021-11-21 11:18:35 +01:00
Raphael CoefficandRaphael Coeffic b1b3423844 Use stream buffer for CLI 2021-11-21 11:18:35 +01:00
rotormanandRisto fc2142ec78 Changed uniformly to EdgeTX boiler plate (also added boiler for files that were missing it). 2021-10-02 14:22:01 +02:00
Tom van DijkandGitHub 682f0f1b05 lua serialRead (#7520)
Lua serial read
2020-05-15 15:13:23 +02:00
3djcandBertrand Songis fa951acf40 Review line ending handling (#4820)
* New line end handling rules

* Normalize all the line endings
2017-04-19 10:54:43 +02:00
Damjan AdamicandBertrand Songis 29c43d9e33 Projectkk2glider/usb hardening (#4125)
* USB fixes:
 * USB initialized when USB cable is inserted and de-initialized when disconnected (this was the original way, which proved itself unreliable in the past. Now with the new USB library it appears to work without any problems. Used in this way result in safer operation - USB controller is disabled while unconnected)
Works without force device mod
 * Serial: initialization of global variables
 * Reduced RAM usage - data moved to FLASH

* Detailed USB interrupt counters (+ debug print fix)
2016-12-11 10:33:52 +01:00
Damjan AdamicandBertrand Songis 5a5cf7cf33 Projectkk2glider/issue 4086 usb and serial (#4097)
* Serial2 changes:
  * stm32 driver moved to common dir.
  * earlier start of driver (Taranis)
  * wait for free buffer time limited
USB changes:
 * Upgrade to ST USB-Host-Device_Lib_V2.2.0 (from V2.1.0) - this fixed a problem with USB serial #4086)
 * other fixes for #4086

* USB-Host-Device_Lib: renamed directory to V2.2.0 (from V2.1.0)
2016-12-06 20:32:30 +01:00
Damjan Adamic 183b24086a Trace installed 2016-09-11 21:37:54 +02:00
Bertrand SongisandGitHub 83cdd67e6a Bsongis/move everything (#3669)
* Directories moved

* Directories moved

* Directories moved

* Directories moved

* Directories moved

* rename horus directories in gui to 480x272

* Directories moved

* Rename taranis to 212x64

* Directories moved - TARANIS target removed, it's now X9E / X9D+ / X9D

* Directories moved - TARANIS target removed, it's now X9E / X9D+ / X9D

* Directories moved - TARANIS target removed, it's now X9E / X9D+ / X9D

* Directories moved - TARANIS target removed, it's now X9E / X9D+ / X9D

* Directories moved - TARANIS target removed, it's now X9E / X9D+ / X9D

* Directories moved - TARANIS target removed, it's now X9E / X9D+ / X9D

* Directories moved - TARANIS target removed, it's now X9E / X9D+ / X9D

* Fix x9e compile

* Directories moved - TARANIS target removed, it's now X9E / X9D+ / X9D

* Directories moved - TARANIS target removed, it's now X9E / X9D+ / X9D

* Directories moved - TARANIS target removed, it's now X9E / X9D+ / X9D

* Directories moved - TARANIS target removed, it's now X9E / X9D+ / X9D

* Directories moved - TARANIS target removed, it's now X9E / X9D+ / X9D

* Minor improvement of path handling

* Another bunch of files renamed :)

* Another bunch of files renamed :)

* Another bunch of files renamed :)

* Another bunch of files renamed :)

* Another bunch of files renamed :)

* Rename 9x to 128x64

* Compilation fixes

* Compilation fixes

* Compilation fixes

* Compilation fixes

* Compilation fixes

* Compilation fixes
2016-07-29 12:47:20 +02:00