Commit Graph
253 Commits
Author SHA1 Message Date
raphaelcoefficandPeter Feerick d3c0193bc0 fix(nv14): activate trim as buttons in bootloader 2023-07-04 17:04:10 +10:00
raphaelcoefficandPeter Feerick 261c0213f3 fix: NV14 uses active-high for keys and trims 2023-07-04 17:04:10 +10:00
Raphael CoefficandMalte Langermann 2b100e0eb5 refact: ADC, switches and keys
Add "hardware_defs" target to dump hardware defines from hal.h per target

Fixed hal.h definitions for switches & ADC inputs

Tools to generate hardware definitions from current hal.h

generator: add support for EXTx and analog switches

WiP

Add generated header to hardware_defs target

Add support for ADC input direction and index per GPIO port

Incredible: it compiles

Removed StdPeriph ADC driver

Works on QX7

Works on TX16S (VBat missing)

Switch driver using generated switches for stm32 targets

Switch driver with generated switches for simu

Use switch names from switch driver

Fixed single conversion handling

Fixed horus VBat reading

Added switch name

Fix warnings about bitfield offsets and GCC 4.4

This is caused by bitfields that cross type boundaries. In this particular case, it happens as the bitfield is not defined the same in `rtc_backup.cpp`.

Switches has already been moved to generic driver

Jitter measurement for each sample, not just for oversampled values

Moved periph clock init to the ADC driver

ADC & GPIOs.

Add switchInit() to init pins

Fix NV14 CMake

Fix taranis target

Fix NV14 (again)

Model audio files: use new interface for switch index

Fix X9-lite

Fix simu headers

Fix getSwitchName()

Add support for ADC switches

Fix switch warning YAML

Test only switches which are defined

Conversions tests for QX7 only on QX7

Fix X12S

Fix function switch names

Enable ADC periph clock before initialising channels

NV14: offset inputs for the sticks & fix switches

WiP: get rid of VSRCRAW and some more

Simu shall use normal ADC driver

fix x7

fix nv14

Fix 9x nav

fix 212x64

fix xlite

fix x9e

fix simu lib

fix unit tests

fix x7 tests

PWM stick values should be written directly into adcValues

... just like FlySky sticks.

fix x12s

fix nv14

Add some support for SPI ADC (only unit tests)

Remove `jq` usage

fix generate_yaml.py for newer libclang

fix pot config

fix stick names

Some YAML generator improvements

Max 16 Pots on COLORLCD

Fix some source names

Use 10 bits for switches to prevent overflow

Removed horus constants for switches & ADC inputs

Fix unit tests

Fix curve edit

Fix libsimulator

Fix function switches (tpro)

Refine ADC & analog API

Moved hardware definitions scripts and templates into own dir

cleanup API refine

Fix unit tests

Mixer: apply calibration only on required inputs

Place ADC switches after all other ADC inputs

Fix X12S

Remove useless TR_POTS_VSRCRAW, TR_SW_VSRCRAW, and TR_VSRCRAW

Cleanup redundant generated YAML parsers

Fixes Boxer rebase

Add boxer to generate-hw-defs.sh

Obsolete LUA exports

Add boxer ADC_DIRECTION

Split generate_hw_defs.py into multiple files

Some cleanup (+ LUA switches)

Fix AXIS definitions

Fixed translation strings declarations

Some rebase fixes

Remove some useless StdPeriph drivers

fix: set pin mode to reset state on usart deinit

fix: use canonical names for calibration data

fix: ADC driver does not care about unconfigured inputs

fix X12S ADC

Add support for ADC conversion chaining

Better X12S ADC implem

Moved X12S ADC driver to HAL/LL

Improve ADC driver separation

Fixed taranis & nv14

Moved PWM gimbals to HAL/LL

Removed useless TR_EXTRA_VSRCRAW

Fixed include guards

Small fixes

Renamed control inputs

Moved internal and external module pulse driver def to boards

Move more things to the generic_stm32 board

Remove STR_VMIXTRIMS

Added analog labels

Generate main control names

Misuse labels / short labels for main controls

Backward compatibility: sliders and legacy names

New keys driver

Let's get rid of StdPeriph headers in simu

Add jinja2 to CI workflows

Use `grep` instead of `sed`

chore: add python jinja2 oto msys setup script

Removed more static definitions and use dynamic ones instead

Fixes X9E

Fix x7 nav too

212 switch display

Fix default sliders

Removed NUM_STICKS

212 switch display working nicely

Surface radio 'stick' replacements

fix: switch, trim & rotary pin init

Remove old key drivers

Removed VKEYS

Removed ETX_FOURCC

Fixed SURFACE_NAME

Removed TR_VSWITCHES & TR_TRIMS_SWITCHES

Fix xpot switches

Store calibrated analogs in physical order

Use getSourceString in drawSource

Implement missing YAML read/write

Fix isSourceAvailableInInputs()

Fix isSourceAvailable()

Some surface fixes

Fix CLI debug

Ported colour UI of analog diagnostics to new ADC API

Small fixes

Better input mapping

Minor tpro fixes

Fix trims available

Remove TX mode choice on surface radio

Rename surface controls

Channel order alignement

Fix throttle warning

Fix checkTrims()

Fix pot config casting issue

Fix IS_SWITCH_FS()

Fixed input mapping

Fix fswitch auto-switch

Fixed storing / reading function switches in YAML

Fix enableVBatBridge() / disableVBatBridge()

Fix interesting mode conversion

Fix sources issues

Fix special funnction list

Proper function switch handling

128 GUI improvements

Fix compilation

Boxer cosmetics

128 hardware screen cosmetic

Fix TX12 switches

More switches fixes

Simplify CPU type handling

Fix flash size

Fixed page-up / page-down in libopenui
2023-06-25 14:32:39 +02:00
richardclliandGitHub 5288441a82 fix(el18): Audio output should be OFF if no audio playing (#3670)
* Added audio on/off depends whether audio content is present.

* Aligned the mute control with the implementation in the DAC driver.

* Mute Pin should be inverted.

* Removed PCB specific dependencies.

* chore: Formatting and cleanup
2023-06-15 10:07:30 +10:00
Xy2019andGitHub 9a51ff8f0e fix(el18): Power-on backlight before screen content (#3206)
Also relevant to NV14
2023-03-10 16:43:06 +10:00
Xy2019andGitHub f52fb2f257 fix(el18): Prevent power on when USB is disconnected while radio is charging (#3325) 2023-03-10 16:08:06 +10:00
HThurenandGitHub d927a8d687 feat: Bootloader translated from EN to native language (#2946)
* Basic change

* Other languages

* Minor correction

* IT translated

* Minor correction

* Fix enable / disable in ascii only

* Fix enable / disable in ascii only

* Update cn.h

Fix enable / disable at nv14 bootloader

* Update cz.h

Fix enable / disable at nv14 bootloader

* Update de.h

Fix enable / disable at nv14 bootloader

* Update es.h

Fix enable / disable at nv14 bootloader

* Update fi.h

Fix enable / disable at nv14 bootloader

* Update fr.h

Fix enable / disable at nv14 bootloader

* Update it.h

Fix enable / disable at nv14 bootloader

* Update jp.h

Fix enable / disable at nv14 bootloader

* Update nl.h

Fix enable / disable at nv14 bootloader

* Update se.h

Fix enable / disable at nv14 bootloader
Only use of Ascii in bootloader

* Update pt.h

Fix enable / disable at nv14 bootloader

* Update de.h

Fix enable / disable at nv14 bootloader

* Update pl.h

Fix enable / disable at nv14 bootloader

* Update tw.h

Fix enable / disable at nv14 bootloader
Only use of Ascii in bootloader
2023-02-27 21:50:12 +10:00
9216570d6c feat: Flysky gimbal support for RM Boxer (#3139)
* Adds Flysky digital hall gimbal support for RadioMaster Boxer.

---------

Co-authored-by: rotorman <risto.koiva@web.de>
2023-02-26 13:27:37 +01:00
Malte LangermannandGitHub 070b255647 fix: RTOS independent 1ms tick count for HAL (#3178)
* fix: use a 1ms HW timer to generate a RTOS independend 1ms tick counter for HAL

* fix comments
2023-02-13 16:35:11 +10:00
Raphael CoefficandGitHub be3f8d74a8 feat(lua): Port of NodeMCU Lua53 read-only tables (#2994)
* chore(lua): revert useless c light function change

This change was part of the eLua LTR patches (based on 5.1), whereby this feature was already integrated in Lua 5.2.

* feat(lua): port of NodeMCU Lua53 read-only tables

# Conflicts:
#	radio/src/lua/CMakeLists.txt
#	radio/src/lua/api_general.cpp

* fix(nv14): missing SDRAM definition

* fix: l_mathop

* fix: use float functions in drawPower()

* fix: ltable resize

* fix: correct name is "bit32"

* fix: first Lua context must be closed last

As the lookup cache is attached to that one

* Revert to Lua using double

* Ensure byte-code compatibility

* Fix possible compatibility issue with `lua_typename`/`luaL_typename`

* Fix Bitmap symbol table

* Re-add table lib for COLORLCD
2023-02-09 20:29:56 +10:00
Raphael CoefficandGitHub 72193eda82 chore: New module/serial API (#3055)
* WiP: new module interface

* WiP: softserial timer DMA

* WiP: setup() and send() in one step

and remove methods specific to internal or external module

* fixes and extra port config

* horus targets

* module ports have moved

* T8 support (only internal module)

* fix nv14

* stupid GCC....

* disable BT

* remove nv14 telem driver

* remove old aux serial driver

* Move module buffers out of pulses.h

* Soft serial fixes and PXX1 support

* Fixed PPM module output

* Fixed CLI

* compilation fixes

* Ported bluetooth and flysky gimbal to new serial driver

* Re-enable soft-serial RX

* fixes and cleanup

* nv14 fixes

* Fix flysky gimbals

* Ghost module

* 16 bytes of RAM

* Remove getByte from module API

* Ghost cleanup

* fix: _half_duplex_input() must be called after usart init

* WiP

* more cleanup

* Remove board specific settings from PXX1 / PXX2 drivers

* A bit of PXX2 header cleanup

* Add support for OVER8 and ONEBIT

* Add some support for inverters (NV14 / EL18)

* Support NV14 power fixes in generic board

* Fix polarity handling

* Fix RX DMA

* Fix mixer not running

* Add soft-serial polarity control

* Quick fix for telemetry polling while module port is changed

* Fix bootloader DEBUG

* Fix MPM telemetry

* Fix pulse start

* DSM2 soft-serial fallback

* DSMP async module restart

* Fix CRSF LUA upstream

* Remove global variable telemetryProtocol

* Use HAL/LL constants

* Fix various issue with AFHDS3 and NV14/EL18 internal module

* Fixed S.PORT unit tests

* fix: update widx after writing at current index

* fix: init error condition

* Fix: possible infinite loop in _find_port()

* Add support for bidir S.PORT init

* Add support for "getLastByte" in HW serial driver

* PXX1: Add support for S.PORT based on IDLE callback

* Fix rebase error

* Fix softserial _rx_fifo_push()

* Add softserial support for waitForTxCompleted()

* Fix MPM flashing (internal / external)

* Fixed external MPM

* Activate RX DMA on internal module

Seems to work with serial passthrough without issues, at least on the L3R PRO.

* Fix softserial DMA on stdlcd F4 targets

* Add softserial support for 32bit timers (mostly TIM2)

* More precise soft-serial

* Fix MPM update using inverters & HW uart

* Raise S.PORT DMA/USART IRQ prio to achieve faster switching to input

* Remove useless delays

* Fix flashing external ELRS module

* Added a retry mechanism for FrSky S.PORT update

* Remove useless enableRx()

* External FrSky modules are all flashed via S.PORT

* Remove power management unit update

This was only used on the first batch of X-lite.
2023-02-09 19:44:32 +10:00
Raphael CoefficandGitHub f9bac7ba9b chore: Remove support for binary storage format (#2900) 2022-12-23 13:05:57 +10:00
Raphael CoefficandGitHub 06c359f096 feat(ACCESS): Configure AUX serial port as "External module" (#2562)
* Enable RX DMA on external module USART

* feat(ACCESS): configure AUX serial port as "External module" (#2562)

This allows configuring the external access mod on runtime rather than by compilation option.

* fix: fetch external module driver
2022-12-14 18:41:32 +10:00
Raphael CoefficandGitHub 48be7c263b chore(cmake): CMake cleanup and simplifications (#2620)
* CMake cleanup and simplifications

* Position Independent Code is need for radiolib_native

* Some more cleanup & repair

* Fix SIMU_SRC scope issue

* fix: avoid warnings due to assembler statements from StdPeriph on arm64 native
2022-12-12 13:58:27 +10:00
Raphael CoefficandRaphael Coeffic 07db986d6a More cleanup 2022-12-10 13:37:31 +01:00
Raphael CoefficandRaphael Coeffic 042d5091f2 HAL/LL: Generic EXTI & trainer driver
Changes:
- generic EXTI driver
- generic trainer driver
- relocated rotary encoder timer (simple 100us delay) from TIM4 to TIM12
- taranis & horus use now TIM4 for trainer pulses
- serial driver handles periph clocks for UARTs

TODO:
- SBUS on heartbeat pin (USART or soft-serial)
2022-12-10 13:37:31 +01:00
Malte LangermannandGitHub d134e1a840 chore: Fix a bunch of compile warnings (#2748)
* chore: fix warnings for simu and firmware, part 1

* chore: fix warnings
2022-12-05 20:41:42 +10:00
richardclliandGitHub 2ab1a9f725 fix(NV14/EL18): Reboot to charge screen if USB is plugged in at poweroff (#2731)
* Added reboot when detect USB is plugged.

* Fine tuned boardOff routine.
2022-11-16 20:14:26 +10:00
richardclliandGitHub 099e2adda9 fix(nv14;el18) Fix clicks when powering on, changing volumeStreamlined the SPI audio init of EL18. (#2730) 2022-11-15 12:25:56 +10:00
a6168b40fb fix(nv14): Use PP for extmod invert output, remove redundant init (#2667)
* Use PP for extmod invert output and remove redundant pwn pin init.

* Reshuffled lines for increased readability

Co-authored-by: Risto <rotorman@users.noreply.github.com>
2022-11-03 21:11:04 +10:00
Raphael CoefficandGitHub b409c6ff92 fix(nv14/el18): external module RX inversion (#2647)
The previous state would set/reset `PE15` (unused) instead of `PI15` (connected to the inverter).
2022-10-31 20:58:16 +10:00
Raphael CoefficandGitHub e626a4e911 fix(sdcard): apply the same fix as #2517 to NV14 (#2641) 2022-10-31 09:17:37 +10:00
richardclliandGitHub 5c555244d2 fix(NV14/EL18): Reduce LCD pixel clock to 1000000 (#2525) 2022-10-13 09:35:26 +10:00
Malte LangermannandGitHub 8b7e8c3017 EL18 RF USB switch (#2221)
* feature: added ability to have radio specific menu items in the bootloader
* added enabling/disabling USB access to the RF module via the bootloader
* enable the internal module on EL18, when RF module USB access is enabled
* moved USB switch pin initialization to the NV14/EL18 specific code
* moved EL18 USB switch defines to boot_menu
* feat: added a symbol for RF USB switch menu option on EL18 bootloader
2022-09-08 08:20:49 +02:00
XINGandPeter Feerick 299991bc11 Add iFlight Commando8
Add iFlight Commando8 ELRS radio
2022-08-16 18:44:57 +10:00
Raphael CoefficandRaphael Coeffic 3d3bc64d30 Fixed AFHDS2 define 2022-08-11 12:15:46 +02:00
Raphael CoefficandRaphael Coeffic f51f0c1aa8 Disable PWR_FIX for EL18
The pin is connected to the battery voltage and is meant to be used as ADC pin.
2022-08-11 12:15:46 +02:00
Raphael CoefficandRaphael Coeffic b9b31a659f Fix NV14 simulation 2022-08-11 12:15:46 +02:00
Raphael CoefficandRaphael Coeffic 56eb564b86 Detect NV14 vs EL18 at boot 2022-08-11 12:15:46 +02:00
Raphael CoefficandRaphael Coeffic 4eeef9e916 Fixed LCD driver (no copy necessary) 2022-08-11 12:15:46 +02:00
Raphael CoefficandRaphael Coeffic bb6c6d6e2d WiP PoC AFHDS3 internal module 2022-08-11 12:15:46 +02:00
Raphael CoefficandRaphael Coeffic 5132e11d41 Add some support for RX DMA on internal module 2022-08-11 12:15:46 +02:00
Raphael CoefficandRaphael Coeffic 1a918bf072 Improve NV14 CMake 2022-08-11 12:15:46 +02:00
Malte LangermannandGitHub 097964147b fix(NV14): set lcd pixel clock depending on the detected LCD (#2097)
Code kindly provided by FlySky has been used as the reference.
2022-07-04 09:41:06 +02:00
Malte LangermannandRaphael Coeffic 42e54f5100 support new NV14 touch controller (#2027)
* support new NV14 touch controller

* implement review changes
reduced CST836U read delay to 5 us
2022-06-25 16:09:04 +02:00
gagarinlgandRaphael Coeffic 10c851469a remove unneeded touch IC reset, reduce boot time by 300ms 2022-06-25 16:09:04 +02:00
gagarinlgandRaphael Coeffic 778f478686 fix NV14 touch driver 2022-06-25 16:09:04 +02:00
Raphael CoefficandRaphael Coeffic 5ca584cabf nv14: fixed DEBUG=Y 2022-06-25 16:09:04 +02:00
Raphael CoefficandRaphael Coeffic 7ec9651304 Fix NV14 internal module HAL 2022-06-25 16:09:04 +02:00
Raphael CoefficandRaphael Coeffic 244efed6ba NV14 touch driver 2022-06-25 16:09:04 +02:00
Raphael CoefficandRaphael Coeffic 3eb109b198 Removed white screen flash on bootloader start 2022-06-17 05:34:47 +02:00
Raphael CoefficandRaphael Coeffic fe6922494a LCD & backlight init only from lcdInitDisplayDriver() 2022-06-17 05:34:47 +02:00
Raphael CoefficandRaphael Coeffic 8681d5aa3e Fix bootloader display init order 2022-06-17 05:34:47 +02:00
Raphael CoefficandRaphael Coeffic f6988c0870 The return of XXL font 2022-06-14 22:58:15 +02:00
Raphael CoefficandRaphael Coeffic 4fc2a2ee5d Backlight API fixes 2022-06-13 22:43:45 +02:00
Raphael CoefficandRaphael Coeffic dc75b4916d Simu: add support for backlight off 2022-06-13 22:43:45 +02:00
Raphael CoefficandRaphael Coeffic 7e5d8ee7ac Fixed compilation on non-touch targets 2022-06-11 15:38:08 +02:00
Raphael CoefficandRaphael Coeffic cdeb01d1bb fix(bootloader): font enum 2022-06-11 15:38:08 +02:00
Raphael CoefficandRaphael Coeffic e31a1cc1fc Input & Mixer edit pages: flex layout rework 2022-06-11 15:38:08 +02:00
Raphael CoefficandRaphael Coeffic 5a0fe2101c Inputs, Mixers: various tweaks & fixes 2022-06-11 15:38:08 +02:00