* Save 128 byte by moving variable to stack
* Make usb mass storage buffer smaller on F2 processors and put into reuseablebuffer
- Lower USB mass storage buffer to 512 bytes per default on F2
targets, makes usb speed slightly slower ~600 kB/s instead ~700 KB/s
in my tests, saving 3584 bytes
- Save another ~300 bytes by putting that buffer into reusableBuffer
* Don't put id into reusuableBuffer
All uses of id can be on the stack as well. Makes no difference for ram usage but makes it safer to reuse reusableBuffer
* Only link cdc serial when needed
We always linked usb cdc even in non debug builds. CDC uses about ~600 byte of RAM for its buffers and structures.
* Switch backlight on when displaying a warning.
This is especially visible on the power off RSSI warning. This will also show the other warnings at start with backlight, even when blocklight is set to always off. But my X9D+ will switch its backlight on after boot once even with backlight on, so backlight=off is not so off as it seems.
* Rework power rssi code a bit
- Cleanup shutdown_confirm code
- allow x9d+ to be compiled as power button too to be able to test these things on the x9d+
- Fix shutoff after 10s in warning dialog on x9d
- Make warning dialog always turn on backlight
* Revert CMakeLists.txt
* - Use @schwabe int/ext matching
- Display model name where the receiver in currently used
* French colom doesn't seem to be standard (wonder why :D)
* Implement showing multiple names
* Another way
* Improvement suggested by @schwabe (thx m8!)
* let's say it's a typo ..
* By unanimous vote of participants
* Updates based on Bertrtand's comments
* Colon right this time ?
* Cosmetics
* Implement R9M protocol according to PXX spec 1.7
Some of the things here are guesswork as I don’t have a R9M at hand. Also Companion support for the extra R9M options is not implemented yet.
* Fix build errors
* Fix clang warnings
- signed char on AVR vs unsigned char on ARM
- use references instead of points in calculation (same code size)
- Ignore packed address warning for mavlink includes
- Turn error on packed addresses to warning for Horus (Cannot fix that without major refactoring, might even need eeprom change)
* Revert fixes for clang on AVR as the old AVR gcc does not like them
* Allow to disable telemetry alarams
This mainly useful for cheap transceivers that have telemetry but no power amplifier and very limited range of often 10-20 meters. This includes fishpepper's tinyFISH FC (and its legal/illegal clones) and also Spektrum BNF models.
* Always disable a warning when RSSI Warnings are disabled
* Compile fix
* Fix typos, also mute sensor lost
Refactor the FrskyRSSIAlarm[2] into a EEPROM compatible RssiAlarm struct
* Compile fixes
* Also refactor Companion
* Cleanup unused datastruct on ARM
* Compile fix for AVR
* Change int to uin8_t for avr
* Fix strings
* MULTI working on sky9x
* Fix crash with module OFF
* Cosmetics
* Compilation fix / cosmetics
* Typo....
* Multi now available on all ARM platforms
* Does this help?
* Compilation fix
* Refactoring of startup code, mainly dealing with detection of unexpected restart/shutdown
* Added g_FATFS_Obj initialization [Horus]
* Fix normal startup
* Use g_eeGeneral.unexpectedShutdown only on radios that have PWRMANAGE defined
Fixes for radios that don't have power control.
Other fixes
* CLI test for new()
* [Horus] Reboot protection reworked to also handle non-WDT events
(cherry picked from commit fe9a52779d062e3f24639479273c906abe6e440b)
Conflicts:
radio/src/targets/horus/board.h
* Reverting most of the changes
* Cleanup
* Added comment that explains apparent non usage of the wdt_disable() function
* More cleanup
* Missing include
* Compilation fix
* [480x272] Fix compiler warnings with awkward extern define in layout.h.
* [firmware][misc] Fix build error with undefined SPLASH; Fix 128x64 syntax error in model_setup.cpp; Fix compiler warning on static init in diskio.cpp.
* [480x272] Revert "Fix compiler warnings with awkward extern define in layout.h." and modify lcd::drawSource() to use mixsrc_t for consistency.
This reverts commit d85d994c877a94c1933c6ece806565ca822d0f54.
* [firmware] Cleanup struct init in diskio modules.
* Serial2 changes:
* stm32 driver moved to common dir.
* earlier start of driver (Taranis)
* wait for free buffer time limited
USB changes:
* Upgrade to ST USB-Host-Device_Lib_V2.2.0 (from V2.1.0) - this fixed a problem with USB serial #4086)
* other fixes for #4086
* USB-Host-Device_Lib: renamed directory to V2.2.0 (from V2.1.0)
* Better memory stats (CLI)
* Bitmap buffer overflow check added
* Lua bitmap improvements
* Proper handling of symbolic links in simulator
* S6R Lua script fixes:
* added progress screen while loading bitmaps
* memory for bitmaps is now freed when leaving the script
* S6R Lua script: improved bitmap loading
* * Lua Themes and Widgets moved to separate file and separate Lua state
* Stand-alone, mixer and function scripts now behave the same as on Taranis (restarted after the stand-alone script was run)
* both Lua states are independent: Themes and Widgets is initialized only at the start, the other one is initialized before and after the stand-alone script is run
* Better leak test and report in BitmapBuffer
* Re #3318: Lua compiler enabled in simu and Companion simulator. Usage:
* any time <xxx>.lua file is about to be loaded and if file <xxx>.lua.src exists:
* load contents of <xxx>.lua.src
* compile Lua code
* save compiled code into <xxx>.lua (effectively overwrites existing file)
* immediately following the compilation the real file loading is done from <xxx>.lua (which by now contains compiled Lua bytecode)
* Introduce 'magnetic 0' for trims
* Removing magnetic 0 that could feel unnatural to a force to 0 when changing side
* Efficiency
* Optimise
* Optimise (reverted from commit 41fc09f0bd37dd4c3067f7406562ab68c07b22ca)
* Bertrand's feedback incorporated
* Another one (bites the dust ?)
