piotr/edgetx-gx12
1
0
Fork 0
Code Issues 2 Pull Requests Actions Packages Projects Releases Wiki Activity
1,151 Commits 2 Branches 0 Tags
fbc95a04da2cbd8fe0a4ab06e5d146c5f801f889
Commit Graph
47 Commits
Author SHA1 Message Date
bsongis c14da4fdbe [MENU long] on a switch in Function Switches screen converts a screen to his correspondant momentary switch (THR <=> THRm, !THR <=> !THRm) 2012-08-27 13:27:07 +00:00
gruvin@gmail.com d6690cbb01 Finally figured out how to add a warning tone for DSM2 range check mode. 
(It only took me about an hour and a half! :-/)

Also increased max filename length handled by "Restore Model" to 16 chars
(only when long filename support is configured in FatFs/ffconf.h)

Bertrand: I had to comment out a call to sdPollmS() as it doesn't seem to exist.
Hopefully the system freeze when I try to select "Restore Model" is
just a symptom of this same issue ... though I fear not.
 2012-08-22 05:18:20 +00:00
bsongis debbff51e0 Issue 66 fixed: PPM_LIMITS_SYMETRICAL Makefile option added (pls tell me if not the right name) 
RSSI Tx and Rx before A1 and A2
Rotary Encoder on ersky9x board
A Mix may be defined in many Phases (idea from Romolo, thanks!)
Differential is now a Curve (private Curve of a Mix)
Issue 56 fixed (native stick as Mix input)
EEPROM saving (LimitData structure)
Issue 79 fixed (Audio Queue)
Trims now working in ersky9x simu
 2012-08-16 14:06:38 +00:00
bsongis 3d737e3eb1 Backlight function switch 
No batt volts averaging during calib
Flight phase in bold in Phase One when enabled
Flash savings
[ersky9x] Delay / Duration in custom switches
 2012-07-18 08:12:26 +00:00
bsongis 0ac6582225 [ersky9x] Inflight Parameters Modification with Rotary Encoder 
TTS script for SAPI voice engine
 2012-07-12 14:22:49 +00:00
bsongis 5d659c359c [ersky9x] Inflight Parameters modification disable for now 2012-07-11 18:08:42 +00:00
bsongis 955767669e The sticky key bug reported by Rob! 
SURROUNDED again here (for Rotary Encoder parameters inflight modification)
 2012-07-11 17:38:22 +00:00
bsongis 95170b5930 [ersky9x] rotary encoders inversion 
RE1 and RE2 renamed as REa and REb (will be needed for Flight Phases uses)
 2012-07-11 13:21:03 +00:00
bsongis 0beaadc2e5 Free EEPROM = available + temp - current model 
Low EEPROM warning displayed on model change
[ersky9x] Rotary Encoder
 2012-07-11 10:40:20 +00:00
bsongis fa4e1e4fc0 No more alert for EEPROM overflow 
Trims buttons don't modify trim position on release
[ersky9x] Audio stopped sometimes without reason
 2012-07-10 13:37:55 +00:00
bsongis 6b6c945f59 Bold introduced in many menus 
PlayTrack for ersky9x
Volume for ersky9x
Names for Mixes and Expos
 2012-06-29 17:17:48 +00:00
bsongis 5158ed5dc4 companion9x compilation 2012-06-22 19:42:38 +00:00
bsongis fb493b5415 SD-Card corrections on ersky9x board 
Status line
FatFs on simu
 2012-06-21 18:40:55 +00:00
bsongis ff878bf884 THR Warn bug fixed. 2012-05-11 19:21:27 +00:00
bsongis d5d902d05e 2bytes flash saved :) 2012-05-09 20:35:15 +00:00
mihlit@mihlit.cz 12c014d79f different fix for "there are no lines to go on trainer:slave_mode" 
Perhaps not the best solution from nice code point of view, but
from three ways I tried, it adds the least amount of bytes :)
 2012-05-09 19:43:58 +00:00
bsongis 597d201b30 Auto Switch function (only in Flight Phases now) 2012-05-06 21:41:41 +00:00
bsongis 0aa0f96346 r632 continued. Still needs tests. 2012-04-27 08:12:56 +00:00
bsongis 9bc18d1888 400bytes flash saved in GeneralMenus + ModelMenus 
On V4.1 board both Rotary Encoder may be used for navigation
TX/RX RSSI set to 0 when no telemetry received since too long
 2012-04-20 17:03:16 +00:00
bsongis 3967d82a28 Option UNITS=IMPERIAL added 
SD card archive function continued (doesn't delete the model until function finished)
Alternate view for outputs in Main Views (Bars and Numbers)
GPS speed was badly displayed (ap instead of bp)
 2012-04-19 17:03:51 +00:00
bsongis abd4de973b Makefile option renamed (EXTRA_ROTARY_ENCODERS) 
Fixed a bug with option EXTRA_ROTARY_ENCODERS: mixes shifted after REb
30 models when open9x / gruvin9x board
LIMITS min and max range fixed
 2012-04-15 22:34:39 +00:00
bsongis 6bc2ddc3d4 Issue 19 solved 
Revert the last Haptic changes (was unfinished, no more spare time during the week-end, sorry!)
Revert my last modification on main views (offset not displayed in Bar Graphs, I was wrong)
PPM Center now configurable for each servo
No mean on the Batt voltage when in the calibration menu to have a faster response when calibrating
SD card Backup / Restore Models feature started
Some french translations fixed
 2012-04-14 11:32:40 +00:00
bsongis 10a29a676e Bug in Mixer when offset used with a switch + slow down 
GPS displayed as ---- when there has no fixed received since beginning
No Custom telemetry screen displayed when nothing to display
Marks at -100 and +100 when editing a value
RSSI alarms 1 + 2 labels were wrong
ANAS menu redesigned
60 models on ersky9x board
Current calibration on ersky9x board
 2012-04-10 18:20:51 +00:00
bsongis e7eaced156 Soft Power Switch on both v4.1 and ersky9x boards 
Delay before effective EEPROM write on these boards
Current displayed
 2012-03-30 16:03:43 +00:00
bsongis 8d30efddc5 Refactoring 2012-03-22 14:22:57 +00:00
bsongis 43c3982d09 Correct maximums for Telemetry inputs in Custom Switches 2012-03-16 21:37:16 +00:00
bsongis 6c1d0cab8a Flash saving (idea from er9x) 
Trims2Offsets function removed as it was as full of bugs than other firmwares (total = ~1000bytes flash saved)
A "Safety CHxx" function is not applied when it is currently edited
The Stick Mode needs confirmation before being used (now edited with [MENU] edit [MENU]).
 2012-02-27 18:52:29 +00:00
bsongis e9dc2e26aa Pat Mackenzie added to the coders list as suggested by Mike in 9xforums 2012-02-27 07:33:11 +00:00
bsongis 01240715a7 Telem. Screen function removed. Too dangerous, may block the radio in this screen... 2012-02-24 18:11:42 +00:00
bsongis 4200c203b6 PXX updates + optimizations pulled from er9x 
FrSky TELEMETRY menu is now moved to [DOWN long]
Function added to reach the TELEMETRY screen when a switch is enabled
Main view optimizations
 2012-02-23 18:09:27 +00:00
bsongis 76406f1f9c Some new fields now inflight modifiable: DR/EXPOS expo / weight, MIXER weight / offset 2012-02-22 17:56:38 +00:00
bsongis 6f1f234b40 Logs port from gruvin9x 
JETI ok on simu
Sticks mode problem in Trims2Offsets function
PXX bug fix pulled from er9x
Optimizations
 2012-02-21 16:36:57 +00:00
bsongis f71eb46023 Inflight parameters modification. 
Last Telemetry parameters still displayed even if NO DATA (after something has been received)
 2012-02-19 23:08:01 +00:00
bsongis 5323106a1a Compilation problem 2012-02-18 09:02:40 +00:00
bsongis 33e30b8fef Inflight parameters modification using Rotary Encoder on v4 (not finished yet). 2012-02-18 08:58:05 +00:00
bsongis a8167c5e0c A little commit between two snow balls fight to warm the hands: this is the way that Cam proposed to exit submenus with Rotary Encoders. Still remaining: the Curve submenu. Ideas needed ;) 2012-02-17 15:11:02 +00:00
bsongis 1ed8d7ca44 Compilation problem when !FRSKY 
Rotary encoder navigation on v4
Some cleaning on code
 2012-02-16 22:40:02 +00:00
bsongis 2204c7523a Copyright notice updated 2012-02-10 16:33:08 +00:00
mihlit@mihlit.cz acd523e699 make code compatible with up-to-date build environment 
These changes make it possible to compile open9x with old (avr-gcc 4.3.3, 
avr-libc 1.6.7) and up-to-date (avr-gcc 4.6.2, avr-libc 1.8.0) build
environments. See Issue 1 for more details.
 2012-02-02 11:23:38 +00:00
bsongis c651917da8 Some rename to open9x 2012-01-18 21:39:45 +00:00
bsongis 9cdf70f9d8 open9x translations 2012-01-18 20:24:15 +00:00
bsongis 43ccaa60e6 Now it compiles without a warning under Visual C++ ... Why? Only because I wanted to have exceptions catched under Windows as we have on Linux. Most users are Windows. They will be all testers :) 2011-12-16 19:06:28 +00:00
bsongis 352b04302a Simu for V4. First draft of rotary encoders use in menus 2011-12-03 16:40:36 +00:00
bsongis 5e633363a9 EEPROM async write bug solved. Progress bar. Popup on MODELSEL. Simu EEPROM async write. 2011-11-26 12:55:00 +00:00
bsongis 54d6634a8b Calibration screen. Bugs and optimizations. 2011-10-13 18:23:01 +00:00
bsongis ec2f6064f4 popMenu is always called without argument 2011-10-03 06:52:11 +00:00
bsongis f0fca34b7e Backup before extended trims function merge 2011-09-13 18:11:01 +00:00