On RadioMaster GX12, the custom AUX1 Ground Station hardware mode is reset/disabled after a radio restart.
Expected
The selected AUX1 mode must persist across radio reboot and continue exposing UART3 (PD8/PD9) as 115200 8N1 TX/RX.
Acceptance
Flash the ground-station EdgeTX build.
Set SYS → Hardware → AUX1 → Ground Station.
Power-cycle GX12.
Verify the UI still shows Ground Station.
Verify Orange Pi receives valid GS frames on /dev/ttyS2 without changing the setting again.
Do not change RC mixes, internal ELRS behavior, or the Ground Station wire protocol.
## Problem
On RadioMaster GX12, the custom AUX1 **Ground Station** hardware mode is reset/disabled after a radio restart.
## Expected
The selected AUX1 mode must persist across radio reboot and continue exposing UART3 (PD8/PD9) as 115200 8N1 TX/RX.
## Acceptance
1. Flash the `ground-station` EdgeTX build.
2. Set `SYS → Hardware → AUX1 → Ground Station`.
3. Power-cycle GX12.
4. Verify the UI still shows `Ground Station`.
5. Verify Orange Pi receives valid `GS` frames on `/dev/ttyS2` without changing the setting again.
Do not change RC mixes, internal ELRS behavior, or the Ground Station wire protocol.
grzesiu
was assigned by hermes2026-09-30 17:54:14 +02:00
Pozostaje sprzętowa akceptacja po pobraniu artefaktu z runu: flash GX12, restart oraz potwierdzenie zachowania ustawienia i ramek GS na Orange Pi /dev/ttyS2. Issue pozostaje otwarte do merge/akceptacji sprzętowej.
Poprawka jest gotowa w PR: https://git.piksar.eu/piotr/edgetx-gx12/pulls/2
Commit: `f0d51db58b0d8a867f1e701063c667c510114f51` (baza: `ground-station`).
Walidacja:
- czysty build/test GX12: 158/158 testów gtest — OK,
- testy regresyjne obejmują Ground Station, wszystkie tryby AUX1 oraz migrację starego `auxSerialMode`,
- `git diff --check` i skan dodanych linii — OK,
- Gitea Actions build dla dokładnego SHA — SUCCESS: https://git.piksar.eu/piotr/edgetx-gx12/actions/runs/171
Pozostaje sprzętowa akceptacja po pobraniu artefaktu z runu: flash GX12, restart oraz potwierdzenie zachowania ustawienia i ramek `GS` na Orange Pi `/dev/ttyS2`. Issue pozostaje otwarte do merge/akceptacji sprzętowej.
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Problem
On RadioMaster GX12, the custom AUX1 Ground Station hardware mode is reset/disabled after a radio restart.
Expected
The selected AUX1 mode must persist across radio reboot and continue exposing UART3 (PD8/PD9) as 115200 8N1 TX/RX.
Acceptance
ground-stationEdgeTX build.SYS → Hardware → AUX1 → Ground Station.Ground Station.GSframes on/dev/ttyS2without changing the setting again.Do not change RC mixes, internal ELRS behavior, or the Ground Station wire protocol.
Poprawka jest gotowa w PR: #2
Commit:
f0d51db58b0d8a867f1e701063c667c510114f51(baza:ground-station).Walidacja:
auxSerialMode,git diff --checki skan dodanych linii — OK,Pozostaje sprzętowa akceptacja po pobraniu artefaktu z runu: flash GX12, restart oraz potwierdzenie zachowania ustawienia i ramek
GSna Orange Pi/dev/ttyS2. Issue pozostaje otwarte do merge/akceptacji sprzętowej.