/** ****************************************************************************** * @file usb_bsp.c * @author MCD Application Team * @version V1.1.0 * @date 19-March-2012 * @brief This file is responsible to offer board support package and is * configurable by user. ****************************************************************************** * @attention * *

© COPYRIGHT 2012 STMicroelectronics

* * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); * You may not use this file except in compliance with the License. * You may obtain a copy of the License at: * * http://www.st.com/software_license_agreement_liberty_v2 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ #include "stm32f2xx_rcc.h" #include "stm32f2xx_gpio.h" #include "misc.h" #include "usb_bsp.h" #include "usbd_conf.h" extern uint32_t SystemCoreClock; /** * @brief USB_OTG_BSP_Init * Initilizes BSP configurations * @param None * @retval None */ void USB_OTG_BSP_Init(USB_OTG_CORE_HANDLE *pdev) { GPIO_InitTypeDef GPIO_InitStructure; RCC_AHB1PeriphClockCmd( RCC_AHB1Periph_GPIOA , ENABLE); /* Configure SOF ID DM DP Pins */ GPIO_InitStructure.GPIO_Pin = // GPIO_Pin_8 | GPIO_Pin_11 | GPIO_Pin_12; GPIO_InitStructure.GPIO_Speed = GPIO_Speed_100MHz; GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF; GPIO_InitStructure.GPIO_OType = GPIO_OType_PP; GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL ; GPIO_Init(GPIOA, &GPIO_InitStructure); //GPIO_PinAFConfig(GPIOA,GPIO_PinSource8,GPIO_AF_OTG1_FS) ; GPIO_PinAFConfig(GPIOA,GPIO_PinSource11,GPIO_AF_OTG1_FS) ; GPIO_PinAFConfig(GPIOA,GPIO_PinSource12,GPIO_AF_OTG1_FS) ; /* Configure VBUS Pin */ GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9; GPIO_InitStructure.GPIO_Speed = GPIO_Speed_100MHz; GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN; GPIO_InitStructure.GPIO_OType = GPIO_OType_OD; GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL ; GPIO_Init(GPIOA, &GPIO_InitStructure); /* // Configure ID pin GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10; GPIO_InitStructure.GPIO_OType = GPIO_OType_OD; GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP ; GPIO_InitStructure.GPIO_Speed = GPIO_Speed_100MHz; GPIO_Init(GPIOA, &GPIO_InitStructure); GPIO_PinAFConfig(GPIOA,GPIO_PinSource10,GPIO_AF_OTG1_FS) ; */ RCC_APB2PeriphClockCmd(RCC_APB2Periph_SYSCFG, ENABLE); RCC_AHB2PeriphClockCmd(RCC_AHB2Periph_OTG_FS, ENABLE) ; } /** * @brief USB_OTG_BSP_EnableInterrupt * Enabele USB Global interrupt * @param None * @retval None */ void USB_OTG_BSP_EnableInterrupt(USB_OTG_CORE_HANDLE *pdev) { NVIC_InitTypeDef NVIC_InitStructure; NVIC_PriorityGroupConfig(NVIC_PriorityGroup_1); NVIC_InitStructure.NVIC_IRQChannel = OTG_FS_IRQn; NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1; NVIC_InitStructure.NVIC_IRQChannelSubPriority = 3; NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; NVIC_Init(&NVIC_InitStructure); } /** * @brief USB_OTG_BSP_uDelay * This function provides delay time in micro sec * @param usec : Value of delay required in micro sec * @retval None */ void USB_OTG_BSP_uDelay (const uint32_t usec) { uint32_t count = 0; const uint32_t utime = ((SystemCoreClock/1000000) * usec); do { if ( ++count > utime ) { return ; } } while (1); } /** * @brief USB_OTG_BSP_mDelay * This function provides delay time in milli sec * @param msec : Value of delay required in milli sec * @retval None */ void USB_OTG_BSP_mDelay (const uint32_t msec) { USB_OTG_BSP_uDelay(msec * 1000); } /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/