/* * Copyright (C) OpenTX * * Based on code named * th9x - http://code.google.com/p/th9x * er9x - http://code.google.com/p/er9x * gruvin9x - http://code.google.com/p/gruvin9x * * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #include "board.h" void pwrInit() { GPIO_InitTypeDef GPIO_InitStructure; GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT; GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz; GPIO_InitStructure.GPIO_OType = GPIO_OType_PP; GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP; // Internal module PWR GPIO_ResetBits(INTMODULE_PWR_GPIO, INTMODULE_PWR_GPIO_PIN); GPIO_InitStructure.GPIO_Pin = INTMODULE_PWR_GPIO_PIN; GPIO_Init(INTMODULE_PWR_GPIO, &GPIO_InitStructure); // External module PWR GPIO_ResetBits(EXTMODULE_PWR_GPIO, EXTMODULE_PWR_GPIO_PIN); GPIO_InitStructure.GPIO_Pin = EXTMODULE_PWR_GPIO_PIN; GPIO_Init(EXTMODULE_PWR_GPIO, &GPIO_InitStructure); #if defined(INTMODULE_BOOTCMD_GPIO) GPIO_ResetBits(INTMODULE_BOOTCMD_GPIO, INTMODULE_BOOTCMD_GPIO_PIN); GPIO_InitStructure.GPIO_Pin = INTMODULE_BOOTCMD_GPIO_PIN; GPIO_Init(INTMODULE_BOOTCMD_GPIO, &GPIO_InitStructure); #endif GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN; // PWR SWITCH GPIO_InitStructure.GPIO_Pin = PWR_SWITCH_GPIO_PIN; GPIO_Init(PWR_SWITCH_GPIO, &GPIO_InitStructure); // PCBREV #if defined(PCBREV_GPIO_PIN) GPIO_InitStructure.GPIO_Pin = PCBREV_GPIO_PIN; GPIO_Init(PCBREV_GPIO, &GPIO_InitStructure); hardwareOptions.pcbrev = PCBREV_VALUE(); #endif // SD-DETECT PIN GPIO_ResetBits(SD_PRESENT_GPIO, SD_PRESENT_GPIO_PIN); GPIO_InitStructure.GPIO_Pin = SD_PRESENT_GPIO_PIN; GPIO_Init(SD_PRESENT_GPIO, &GPIO_InitStructure); // TRAINER DETECT PIN GPIO_InitStructure.GPIO_Pin = TRAINER_DETECT_GPIO_PIN; GPIO_Init(TRAINER_DETECT_GPIO, &GPIO_InitStructure); } void pwrOn() { // we keep the init of the PIN to have pwrOn as quick as possible GPIO_InitTypeDef GPIO_InitStructure; GPIO_InitStructure.GPIO_Pin = PWR_ON_GPIO_PIN; GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT; GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz; GPIO_InitStructure.GPIO_OType = GPIO_OType_PP; GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP; GPIO_Init(PWR_ON_GPIO, &GPIO_InitStructure); GPIO_SetBits(PWR_ON_GPIO, PWR_ON_GPIO_PIN); shutdownRequest = NO_SHUTDOWN_REQUEST; shutdownReason = DIRTY_SHUTDOWN; } void pwrOff() { GPIO_ResetBits(PWR_ON_GPIO, PWR_ON_GPIO_PIN); } bool pwrPressed() { return GPIO_ReadInputDataBit(PWR_ON_GPIO, PWR_SWITCH_GPIO_PIN) == Bit_RESET; } void pwrResetHandler() { RCC->AHB1ENR |= PWR_RCC_AHB1Periph; // these two NOPs are needed (see STM32F errata sheet) before the peripheral // register can be written after the peripheral clock was enabled __ASM volatile ("nop"); __ASM volatile ("nop"); // We get here whether we are powering up normally, we had an unexpected reboot or we have just powered down normally. // We want: // - In the 2nd case, to power ON as soon as possible if an unexpected reboot happened // (we get there running on remaining capacitor charge, soft power having been cut by the RESET). // - In the 3rd case, NOT power on as that would prevent from turning the system off. // - The 1st case does not need to be handled here, but will be as a result of the handling for the 3rd case, see below. // // shutdownRequest is used to handle the 3rd case. If we really powered down on purpose this will still be set to SHUTDOWN_REQUEST // as we left it in pwrOff(). If however we had an unexpected reboot, it would be set to NO_SHUTDOWN_REQUEST as we set it in pwrOn(). // Any other value (e.g. resulting from data corruption) would also keep power on for safety, so this variable can NOT be used // to detect an unexpected reboot (on a normal power on the contents of the variable are random). // // shutdownReason is used to differentiate between an unexpected reboot and a normal power on. We set it to DIRTY_SHUTDOWN in pwrOn() // in anticipation of a potential reboot. Should there be one the value should be preserved and signal below that we rebooted unexpectedly. // If it is NOT set to DIRTY_SHUTDOWN we likely had a normal boot and its contents are random. Due to the need to initialize it to detect a // potential failure ASAP we cannot use it to determine in the firmware why we got there, it has to be buffered. // // powerupReason is there to cater for that, and is what is used in the firmware to decide whether we have to enter emergency mode. // This variable needs to be in a RAM section that is not initialized or zeroed, since once we exit this pwrResetHandler() function the // C runtime would otherwise overwrite it during program init. // Only for X12, X10 power circuit causes inability to shut down on some samples. #if defined(PCBX12S) if (shutdownRequest != SHUTDOWN_REQUEST || WAS_RESET_BY_WATCHDOG_OR_SOFTWARE()) { if (shutdownReason == DIRTY_SHUTDOWN) { powerupReason = DIRTY_SHUTDOWN; } pwrOn(); } #else if (WAS_RESET_BY_WATCHDOG_OR_SOFTWARE()) { pwrOn(); } #endif }