/*
 * Authors (alphabetical order)
 * - Andre Bernet <bernet.andre@gmail.com>
 * - Bertrand Songis <bsongis@gmail.com>
 * - Bryan J. Rentoul (Gruvin) <gruvin@gmail.com>
 * - Cameron Weeks <th9xer@gmail.com>
 * - Erez Raviv
 * - Jean-Pierre Parisy
 * - Karl Szmutny <shadow@privy.de>
 * - Michael Blandford
 * - Michal Hlavinka
 * - Pat Mackenzie
 * - Philip Moss
 * - Rob Thomson
 * - Romolo Manfredini <romolo.manfredini@gmail.com>
 * - Thomas Husterer
 *
 * open9x is based on code named
 * gruvin9x by Bryan J. Rentoul: http://code.google.com/p/gruvin9x/,
 * er9x by Erez Raviv: http://code.google.com/p/er9x/,
 * and the original (and ongoing) project by
 * Thomas Husterer, th9x: http://code.google.com/p/th9x/
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 */

#ifndef board_act_h
#define board_act_h

#include <stdio.h>
/* #include "stm32f2xx_rcc.h" */
#include "stm32f10x_gpio.h"
#include "stm32f10x.h"

// Keys
#define GPIO_BUTTON_MENU                GPIOC->IDR
#define GPIO_BUTTON_EXIT                GPIOC->IDR
#define GPIO_BUTTON_CLR                 GPIOC->IDR
#define GPIO_BUTTON_PAGE                GPIOC->IDR
#define GPIO_BUTTON_ENTER               GPIOC->IDR
#define PIN_BUTTON_MENU                 GPIO_Pin_11
#define PIN_BUTTON_EXIT                 GPIO_Pin_12
#define PIN_BUTTON_CLR                  GPIO_Pin_13
#define PIN_BUTTON_PAGE                 GPIO_Pin_10
#define PIN_BUTTON_ENTER                GPIO_Pin_14

// TODO elsewhere
#if !defined(SIMU)
#define SD_IS_HC()                     (1)
#endif


extern "C" {
extern void init_SDcard();
extern void sdInit();
}

#define sdPoll10ms()

void usbMassStorage();

#define JACK_PPM_OUT()
#define JACK_PPM_IN()

void configure_pins( uint32_t pins, uint16_t config );
uint16_t getCurrent();

extern uint8_t temperature ;              // Raw temp reading
extern uint8_t maxTemperature ;           // Raw temp reading
uint8_t getTemperature();

extern int32_t Card_state;
extern volatile uint32_t Card_initialized;
#define SD_ST_DATA              9
#define SD_ST_MOUNTED           10

#define SD_GET_SIZE_MB()        (0)
#define SD_GET_BLOCKNR()        (0)
#define SD_GET_SPEED()          (0)

void pwrOff();

#define strcpy_P strcpy
#define strcat_P strcat

extern uint32_t readKeys();
#define KEYS_PRESSED() (~readKeys())
#define DBLKEYS_PRESSED_RGT_LFT(i) ((in & (0x20 + 0x40)) == (0x20 + 0x40))
#define DBLKEYS_PRESSED_UP_DWN(i)  ((in & (0x10 + 0x08)) == (0x10 + 0x08))
#define DBLKEYS_PRESSED_RGT_UP(i)  ((in & (0x20 + 0x10)) == (0x20 + 0x10))
#define DBLKEYS_PRESSED_LFT_DWN(i) ((in & (0x40 + 0x08)) == (0x40 + 0x08))

extern uint16_t sessionTimer;

#define BOOTLOADER_REQUEST() (0/*usbPlugged()*/)

#define SLAVE_MODE() (0/*pwrCheck() == e_power_trainer*/)

#if !defined(SIMU)
#define wdt_disable()
#define wdt_enable(x)
#define wdt_reset()
#endif

#define pwrCheck() e_power_on

#define setBacklight(xx)
#define __BACKLIGHT_ON
#define __BACKLIGHT_OFF
#define IS_BACKLIGHT_ON() (1)

#if !defined(SIMU)
#define eeprom_read_block(...)
#define eeWriteBlockCmp(...)
#else
void eeWriteBlockCmp(const void *pointer_ram, uint16_t pointer_eeprom, size_t size);
#endif

void audioInit( void ) ;
void audioEnd( void ) ;

void setFrequency( uint32_t frequency );
uint32_t getFrequency();

#define dacFill(...)

extern uint16_t *nextAudioData;
extern uint16_t nextAudioSize;

inline void dacStart()
{
}

inline void dacStop()
{
}

#define VOLUME_LEVEL_MAX  23
#define VOLUME_LEVEL_DEF  12
inline void setVolume( register uint8_t volume )
{
}

#endif