/* * Authors (alphabetical order) * - Andre Bernet * - Andreas Weitl * - Bertrand Songis * - Bryan J. Rentoul (Gruvin) * - Cameron Weeks * - Erez Raviv * - Gabriel Birkus * - Jean-Pierre Parisy * - Karl Szmutny * - Michael Blandford * - Michal Hlavinka * - Pat Mackenzie * - Philip Moss * - Rob Thomson * - Romolo Manfredini * - Thomas Husterer * * opentx is based on code named * gruvin9x by Bryan J. Rentoul: http://code.google.com/p/gruvin9x/, * er9x by Erez Raviv: http://code.google.com/p/er9x/, * and the original (and ongoing) project by * Thomas Husterer, th9x: http://code.google.com/p/th9x/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * */ #include "../../opentx.h" uint16_t ResetReason; uint32_t Master_frequency ; volatile uint32_t Tenms ; volatile uint8_t lcdLock; volatile uint32_t lcdInputs; extern "C" void sam_boot( void ) ; // Prototype // Free pins (PA16 is stock buzzer) // PA23, PA24, PA25, PB7, PB13 // PC20, PC21(labelled 17), PC22, PC24 // REVB // PA25, use for stock buzzer // PB14, PB6 // PC21, PC19, PC15 (PPM2 output) inline void config_free_pins() { #if defined(REVA) register Pio * pioptr = PIOA ; pioptr->PIO_PER = 0x03800000L ; // Enable bits A25,24,23 pioptr->PIO_ODR = 0x03800000L ; // Set as input pioptr->PIO_PUER = 0x03800000L ; // Enable pullups pioptr = PIOB ; pioptr->PIO_PER = 0x00002080L ; // Enable bits B13, 7 pioptr->PIO_ODR = 0x00002080L ; // Set as input pioptr->PIO_PUER = 0x00002080L ; // Enable pullups pioptr = PIOC ; pioptr->PIO_PER = 0x01700000L ; // Enable bits C24,22,21,20 pioptr->PIO_ODR = 0x01700000L ; // Set as input pioptr->PIO_PUER = 0x01700000L ; // Enable pullups #else configure_pins( PIO_PB14, PIN_ENABLE | PIN_INPUT | PIN_PORTB | PIN_PULLUP ) ; #endif } // Assumes PMC has already enabled clocks to ports inline void setup_switches() { #if defined(REVA) register Pio *pioptr = PIOA ; pioptr->PIO_PER = 0xF8008184 ; // Enable bits pioptr->PIO_ODR = 0xF8008184 ; // Set bits input pioptr->PIO_PUER = 0xF8008184 ; // Set bits with pullups pioptr = PIOB ; pioptr->PIO_PER = 0x00000010 ; // Enable bits pioptr->PIO_ODR = 0x00000010 ; // Set bits input pioptr->PIO_PUER = 0x00000010 ; // Set bits with pullups pioptr = PIOC ; pioptr->PIO_PER = 0x10014900 ; // Enable bits pioptr->PIO_ODR = 0x10014900 ; // Set bits input pioptr->PIO_PUER = 0x10014900 ; // Set bits with pullups #else configure_pins( 0x01808087, PIN_ENABLE | PIN_INPUT | PIN_PORTA | PIN_PULLUP ) ; configure_pins( 0x00000030, PIN_ENABLE | PIN_INPUT | PIN_PORTB | PIN_PULLUP ) ; configure_pins( 0x91114900, PIN_ENABLE | PIN_INPUT | PIN_PORTC | PIN_PULLUP ) ; #endif } #ifdef SIMU #define stop_trainer_capture() #define rotencEnd() #define sam_boot() #else inline void UART3_Configure(uint32_t baudrate, uint32_t masterClock) { register Uart *pUart = BT_USART; /* Configure PIO */ configure_pins( (PIO_PB2 | PIO_PB3), PIN_PERIPHERAL | PIN_INPUT | PIN_PER_A | PIN_PORTB | PIN_NO_PULLUP ) ; /* Configure PMC */ PMC->PMC_PCER0 = 1 << BT_ID; /* Reset and disable receiver & transmitter */ pUart->UART_CR = UART_CR_RSTRX | UART_CR_RSTTX | UART_CR_RXDIS | UART_CR_TXDIS; /* Configure mode */ pUart->UART_MR = 0x800 ; // NORMAL, No Parity /* Configure baudrate */ /* Asynchronous, no oversampling */ pUart->UART_BRGR = ( (masterClock / baudrate) + 8 ) / 16; /* Disable PDC channel */ pUart->UART_PTCR = UART_PTCR_RXTDIS | UART_PTCR_TXTDIS; /* Enable receiver and transmitter */ pUart->UART_CR = UART_CR_RXEN | UART_CR_TXEN; #if 0 pUart->UART_IER = UART_IER_RXRDY ; NVIC_EnableIRQ(UART1_IRQn) ; #endif } void UART3_Stop() { BT_USART->UART_IDR = UART_IDR_RXRDY ; NVIC_DisableIRQ(UART1_IRQn) ; } // Starts TIMER0 at full speed (MCK/2) for delay timing // @ 36MHz this is 18MHz // This was 6 MHz, we may need to slow it to TIMER_CLOCK2 (MCK/8=4.5 MHz) inline void start_timer0() { register Tc *ptc ; // Enable peripheral clock TC0 = bit 23 thru TC5 = bit 28 PMC->PMC_PCER0 |= 0x00800000L ; // Enable peripheral clock to TC0 ptc = TC0 ; // Tc block 0 (TC0-2) ptc->TC_BCR = 0 ; // No sync ptc->TC_BMR = 2 ; ptc->TC_CHANNEL[0].TC_CMR = 0x00008001 ; // Waveform mode MCK/8 for 36MHz osc. ptc->TC_CHANNEL[0].TC_RC = 0xFFF0 ; ptc->TC_CHANNEL[0].TC_RA = 0 ; ptc->TC_CHANNEL[0].TC_CMR = 0x00008040 ; // 0000 0000 0000 0000 1000 0000 0100 0000, stop at regC ptc->TC_CHANNEL[0].TC_CCR = 5 ; // Enable clock and trigger it (may only need trigger) } // TIMER2 at 200Hz, provides 5mS for sound and 10mS tick on interrupt // Starts TIMER2 at 200Hz, commentd out drive of TIOA2 (A26, EXT2) inline void start_timer2() { register Tc *ptc ; register uint32_t timer ; // Enable peripheral clock TC0 = bit 23 thru TC5 = bit 28 PMC->PMC_PCER0 |= 0x02000000L ; // Enable peripheral clock to TC2 timer = Master_frequency / 12800 / 2; // MCK/128 and 200 Hz ptc = TC0 ; // Tc block 0 (TC0-2) ptc->TC_BCR = 0 ; // No sync ptc->TC_BMR = 0 ; ptc->TC_CHANNEL[2].TC_CMR = 0x00008000 ; // Waveform mode ptc->TC_CHANNEL[2].TC_RC = timer ; // 10 Hz ptc->TC_CHANNEL[2].TC_RA = timer >> 1 ; ptc->TC_CHANNEL[2].TC_CMR = 0x0009C003 ; // 0000 0000 0000 1001 1100 0000 0000 0011 ptc->TC_CHANNEL[2].TC_CCR = 5 ; // Enable clock and trigger it (may only need trigger) NVIC_EnableIRQ(TC2_IRQn) ; TC0->TC_CHANNEL[2].TC_IER = TC_IER0_CPCS ; } // Start TIMER3 for input capture inline void start_timer3() { register Tc *ptc ; // Enable peripheral clock TC0 = bit 23 thru TC5 = bit 28 PMC->PMC_PCER0 |= 0x04000000L ; // Enable peripheral clock to TC3 ptc = TC1 ; // Tc block 1 (TC3-5) ptc->TC_BCR = 0 ; // No sync ptc->TC_BMR = 2 ; ptc->TC_CHANNEL[0].TC_CMR = 0x00000000 ; // Capture mode ptc->TC_CHANNEL[0].TC_CMR = 0x00090005 ; // 0000 0000 0000 1001 0000 0000 0000 0101, XC0, A rise, b fall ptc->TC_CHANNEL[0].TC_CCR = 5 ; // Enable clock and trigger it (may only need trigger) configure_pins( PIO_PC23, PIN_PERIPHERAL | PIN_INPUT | PIN_PER_B | PIN_PORTC | PIN_PULLUP ) ; NVIC_SetPriority( TC3_IRQn, 14 ) ; // Low priority interrupt NVIC_EnableIRQ(TC3_IRQn) ; ptc->TC_CHANNEL[0].TC_IER = TC_IER0_LDRAS ; } // Start Timer4 to provide 0.5uS clock for input capture void start_timer4() { register Tc *ptc ; register uint32_t timer ; timer = Master_frequency / (2*2000000) ; // MCK/2 and 2MHz // Enable peripheral clock TC0 = bit 23 thru TC5 = bit 28 PMC->PMC_PCER0 |= 0x08000000L ; // Enable peripheral clock to TC4 ptc = TC1 ; // Tc block 1 (TC3-5) ptc->TC_BCR = 0 ; // No sync ptc->TC_BMR = 0 ; ptc->TC_CHANNEL[1].TC_CMR = 0x00008000 ; // Waveform mode ptc->TC_CHANNEL[1].TC_RC = timer ; ptc->TC_CHANNEL[1].TC_RA = timer >> 1 ; ptc->TC_CHANNEL[1].TC_CMR = 0x0009C000 ; // 0000 0000 0000 1001 1100 0000 0100 0000 // MCK/2, set @ RA, Clear @ RC waveform ptc->TC_CHANNEL[1].TC_CCR = 5 ; // Enable clock and trigger it (may only need trigger) } // Timer3 used for PPM_IN pulse width capture. Counter running at 16MHz / 8 = 2MHz // equating to one count every half millisecond. (2 counts = 1ms). Control channel // count delta values thus can range from about 1600 to 4400 counts (800us to 2200us), // corresponding to a PPM signal in the range 0.8ms to 2.2ms (1.5ms at center). // (The timer is free-running and is thus not reset to zero at each capture interval.) // Timer 4 generates the 2MHz clock to clock Timer 3 extern "C" void TC3_IRQHandler() //capture ppm in at 2MHz { static uint16_t lastCapt ; uint16_t capture = TC1->TC_CHANNEL[0].TC_RA ; (void) TC1->TC_CHANNEL[0].TC_SR ; // Acknowledge the interrupt uint16_t val = ((uint16_t)(capture - lastCapt)) / 2; // G: We process g_ppmIns immediately here, to make servo movement as smooth as possible // while under trainee control if (val>4000 && val<19000) { // G: Prioritize reset pulse. (Needed when less than 16 incoming pulses) ppmInState = 1; // triggered } else { if (ppmInState>0 && ppmInState<=16) { if (val>800 && val<2200) { // if valid pulse-width range ppmInValid = PPM_IN_VALID_TIMEOUT; g_ppmIns[ppmInState++ - 1] = (int16_t)(val - 1500)*(g_eeGeneral.PPM_Multiplier+10)/10; //+-500 != 512, but close enough. } else { ppmInState = 0; // not triggered } } } lastCapt = capture; } void init_trainer_capture() { start_timer4() ; start_timer3() ; } void stop_trainer_capture() { TC1->TC_CHANNEL[0].TC_IDR = TC_IDR0_LDRAS ; NVIC_DisableIRQ(TC3_IRQn) ; } void interrupt5ms() { static uint32_t pre_scale ; // Used to get 10 Hz counter HAPTIC_HEARTBEAT(); AUDIO_HEARTBEAT(); if ( ++pre_scale >= 2 ) { BUZZER_HEARTBEAT(); pre_scale = 0 ; per10ms(); } } extern "C" void TC2_IRQHandler() { register uint32_t dummy; /* Clear status bit to acknowledge interrupt */ dummy = TC0->TC_CHANNEL[2].TC_SR; (void) dummy ; // Discard value - prevents compiler warning interrupt5ms(); } // PWM used for PPM generation, and LED Backlight // Output pin PB5 not used, PA17 used as PWMH3 peripheral C // PWM peripheral ID = 31 (0x80000000) // Ensure PB5 is three state/input, used on REVB for MENU KEY // Configure PWM3 as PPM drive, // PWM0 is LED backlight PWM on PWMH0 // This is PC18 peripheral B, Also enable PC22 peripheral B, this is PPM-JACK (PWML3) // // REVB board: // PWML2, output as peripheral C on PA16, is for HAPTIC // For testing, just drive it out with PWM // PWML1 for PPM2 output as peripheral B on PC15 // For testing, just drive it out with PWM void init_pwm() { register Pwm *pwmptr ; register uint32_t timer ; PMC->PMC_PCER0 |= ( 1 << ID_PWM ) ; // Enable peripheral clock to PWM MATRIX->CCFG_SYSIO |= 0x00000020L ; // Disable TDO let PB5 work! /* Configure PIO */ #if defined(REVA) register Pio *pioptr = PIOB ; pioptr->PIO_PER = 0x00000020L ; // Enable bit B5 pioptr->PIO_ODR = 0x00000020L ; // set as input #else configure_pins( PIO_PA16, PIN_PERIPHERAL | PIN_INPUT | PIN_PER_C | PIN_PORTA | PIN_NO_PULLUP ) ; #endif configure_pins( PIO_PC18, PIN_PERIPHERAL | PIN_INPUT | PIN_PER_B | PIN_PORTC | PIN_NO_PULLUP ) ; #if !defined(REVA) configure_pins( PIO_PC22, PIN_PERIPHERAL | PIN_INPUT | PIN_PER_B | PIN_PORTC | PIN_NO_PULLUP ) ; #endif // Configure clock - depends on MCK frequency timer = Master_frequency / 2000000 ; timer |= ( Master_frequency / ( 32* 10000 ) ) << 16 ; timer &= 0x00FF00FF ; pwmptr = PWM ; pwmptr->PWM_CLK = 0x05000000 | timer ; // MCK for DIVA, DIVA = 18 gives 0.5uS clock period @35MHz // MCK/32 / timer = 10000Hz for CLKB // PWM0 for LED backlight pwmptr->PWM_CH_NUM[0].PWM_CMR = 0x0000000C ; // CLKB pwmptr->PWM_CH_NUM[0].PWM_CPDR = 100 ; // Period pwmptr->PWM_CH_NUM[0].PWM_CPDRUPD = 100 ; // Period pwmptr->PWM_CH_NUM[0].PWM_CDTY = 40 ; // Duty pwmptr->PWM_CH_NUM[0].PWM_CDTYUPD = 40 ; // Duty pwmptr->PWM_ENA = PWM_ENA_CHID0 ; // Enable channel 0 #if !defined(REVA) // PWM2 for HAPTIC drive 100Hz test pwmptr->PWM_CH_NUM[2].PWM_CMR = 0x0000000C ; // CLKB pwmptr->PWM_CH_NUM[2].PWM_CPDR = 100 ; // Period pwmptr->PWM_CH_NUM[2].PWM_CPDRUPD = 100 ; // Period pwmptr->PWM_CH_NUM[2].PWM_CDTY = 40 ; // Duty pwmptr->PWM_CH_NUM[2].PWM_CDTYUPD = 40 ; // Duty pwmptr->PWM_OOV &= ~0x00040000 ; // Force low pwmptr->PWM_OSS = 0x00040000 ; // Force low // pwmptr->PWM_ENA = PWM_ENA_CHID2 ; // Enable channel 2 // TODO on REVA? #endif } // LCD i/o pins // LCD_RES PC27 // LCD_CS1 PC26 // LCD_E PC12 // LCD_RnW PC13 // LCD_A0 PC15 // LCD_D0 PC0 // LCD_D1 PC7 // LCD_D2 PC6 // LCD_D3 PC5 // LCD_D4 PC4 // LCD_D5 PC3 // LCD_D6 PC2 // LCD_D7 PC1 #define LCD_DATA 0x000000FFL #if defined(REVA) #define LCD_A0 0x00008000L #else #define LCD_A0 0x00000080L #endif #define LCD_RnW 0x00002000L #define LCD_E 0x00001000L #define LCD_CS1 0x04000000L #define LCD_RES 0x08000000L void configure_pins( uint32_t pins, uint16_t config ) { register Pio *pioptr ; pioptr = PIOA + ( ( config & PIN_PORT_MASK ) >> 6) ; if ( config & PIN_PULLUP ) { pioptr->PIO_PPDDR = pins ; pioptr->PIO_PUER = pins ; } else { pioptr->PIO_PUDR = pins ; } if ( config & PIN_PULLDOWN ) { pioptr->PIO_PUDR = pins ; pioptr->PIO_PPDER = pins ; } else { pioptr->PIO_PPDDR = pins ; } if ( config & PIN_HIGH ) { pioptr->PIO_SODR = pins ; } else { pioptr->PIO_CODR = pins ; } if ( config & PIN_INPUT ) { pioptr->PIO_ODR = pins ; } else { pioptr->PIO_OER = pins ; } if ( config & PIN_PERI_MASK_L ) { pioptr->PIO_ABCDSR[0] |= pins ; } else { pioptr->PIO_ABCDSR[0] &= ~pins ; } if ( config & PIN_PERI_MASK_H ) { pioptr->PIO_ABCDSR[1] |= pins ; } else { pioptr->PIO_ABCDSR[1] &= ~pins ; } if ( config & PIN_ENABLE ) { pioptr->PIO_PER = pins ; } else { pioptr->PIO_PDR = pins ; } } void opentxBootloader(); // Set up for volume control (TWI0) // Need PA3 and PA4 set to peripheral A void i2cInit() { register Pio *pioptr; register uint32_t timing; PMC->PMC_PCER0 |= 0x00080000L ; // Enable peripheral clock to TWI0 TWI0->TWI_CR = TWI_CR_SWRST ; // Reset in case we are restarting /* Configure PIO */ pioptr = PIOA ; pioptr->PIO_ABCDSR[0] &= ~0x00000018 ; // Peripheral A pioptr->PIO_ABCDSR[1] &= ~0x00000018 ; // Peripheral A pioptr->PIO_PDR = 0x00000018 ; // Assign to peripheral timing = Master_frequency * 5 / 1000000 ; // 5uS high and low timing += 15 - 4 ; timing /= 16 ; timing |= timing << 8 ; TWI0->TWI_CWGR = 0x00040000 | timing ; // TWI clock set TWI0->TWI_CR = TWI_CR_MSEN | TWI_CR_SVDIS ; // Master mode enable TWI0->TWI_MMR = 0x002F0000 ; // Device 5E (>>1) and master is writing NVIC_EnableIRQ(TWI0_IRQn) ; } extern const uint8_t BootCode[]; void boardInit() { // TODO this is not clean, completely unuseful, but prevents the bootloader from being optimized away... uint8_t dummy[3]; memcpy(&dummy, BootCode, sizeof(dummy)); for (unsigned int i=0; iRSTC_SR; MATRIX->CCFG_SYSIO |= 0x000000F0L ; // Disable syspins, enable B4,5,6,7 PMC->PMC_PCER0 = (1<PIO_PER = PIO_PC25 ; // Enable bit C25 (USB-detect) #if defined(REVA) // On REVB, PA21 is used as AD8, and measures current consumption. pioptr = PIOA ; pioptr->PIO_PER = PIO_PA21 ; // Enable bit A21 (EXT3) pioptr->PIO_OER = PIO_PA21 ; // Set bit A21 as output pioptr->PIO_SODR = PIO_PA21 ; // Set bit A21 ON // Configure RF_power (PC17) and PPM-jack-in (PC19), neither need pullups pioptr->PIO_PER = 0x000A0000L ; // Enable bit C19, C17 pioptr->PIO_ODR = 0x000A0000L ; // Set bits C19 and C17 as input #endif #if !defined(REVA) pwrInit() ; #endif config_free_pins() ; // Next section configures the key inputs on the LCD data pioptr = PIOC; #if defined(REVA) pioptr->PIO_PER = 0x0000003DL ; // Enable bits 2,3,4,5, 0 pioptr->PIO_OER = PIO_PC0 ; // Set bit 0 output pioptr->PIO_ODR = 0x0000003CL ; // Set bits 2, 3, 4, 5 input pioptr->PIO_PUER = 0x0000003CL ; // Set bits 2, 3, 4, 5 with pullups #else pioptr->PIO_PER = 0x0000003BL ; // Enable bits 1,3,4,5, 0 pioptr->PIO_OER = PIO_PC0 ; // Set bit 0 output pioptr->PIO_ODR = 0x0000003AL ; // Set bits 1, 3, 4, 5 input pioptr->PIO_PUER = 0x0000003AL ; // Set bits 1, 3, 4, 5 with pullups #endif pioptr = PIOB ; #if defined(REVA) pioptr->PIO_PUER = PIO_PB6 ; // Enable pullup on bit B6 (MENU) pioptr->PIO_PER = PIO_PB6 ; // Enable bit B6 #else pioptr->PIO_PUER = PIO_PB5 ; // Enable pullup on bit B5 (MENU) pioptr->PIO_PER = PIO_PB5 ; // Enable bit B5 #endif setup_switches() ; // Enable PCK2 on PB3, This is for testing of Timer 2 working // It will be used as serial data to the Bluetooth module pioptr->PIO_ABCDSR[0] |= PIO_PB3 ; // Peripheral B pioptr->PIO_ABCDSR[1] &= ~PIO_PB3 ; // Peripheral B pioptr->PIO_PDR = PIO_PB3 ; // Assign to peripheral PMC->PMC_SCER |= 0x0400 ; // PCK2 enabled PMC->PMC_PCK[2] = 2 ; // PCK2 is PLLA start_timer2() ; start_timer0() ; adcInit() ; init_pwm() ; __enable_irq(); audioInit(); i2cInit(); eepromInit(); #if defined(ROTARY_ENCODERS) rotencInit(); #endif init_SDcard(); } #endif uint8_t temperature = 0; // Raw temp reading uint8_t maxTemperature = 0 ; // Raw temp reading void end_bt_tx_interrupt() { Uart *pUart = BT_USART ; pUart->UART_IDR = UART_IDR_TXBUFE ; NVIC_DisableIRQ(UART1_IRQn) ; } #if !defined(REVA) uint16_t getCurrent() { static uint16_t Current ; static uint32_t Current_sum ; static uint8_t Current_count ; Current_sum += anaIn(8); // TODO enum if (++Current_count >= 50) { Current = Current_sum / 5 ; Current_sum = 0 ; Current_count = 0 ; } uint32_t current_scale = 488 + g_eeGeneral.currentCalib ; return (current_scale * Current) / 8192; } #endif uint8_t getTemperature() { return temperature + g_eeGeneral.temperatureCalib; } #define STICK_LV_GAIN 0x01 #define STICK_LH_GAIN 0x02 #define STICK_RV_GAIN 0x04 #define STICK_RH_GAIN 0x08 #define GAIN_LV 0x00080000 #define GAIN_LH 0x00000020 #define GAIN_RV 0x20000000 #define GAIN_RH 0x00000008 #define OFF_LV 0x00000200 #define OFF_LH 0x00000004 #define OFF_RV 0x00004000 #define OFF_RH 0x00000002 void setSticksGain(uint8_t gains) { register Adc *padc ; uint32_t gain ; uint32_t offset ; gain = 0 ; offset = 0 ; padc = ADC ; if ( gains & STICK_LV_GAIN ) { gain |= GAIN_LV ; offset |= OFF_LV ; } if ( gains & STICK_LH_GAIN ) { gain |= GAIN_LH ; offset |= OFF_LH ; } if ( gains & STICK_RV_GAIN ) { gain |= GAIN_RV ; offset |= OFF_RV ; } if ( gains & STICK_RH_GAIN ) { gain |= GAIN_RH ; offset |= OFF_RH ; } padc->ADC_CGR = gain; padc->ADC_COR = offset; }