/* * Copyright (C) OpenTX * * Based on code named * th9x - http://code.google.com/p/th9x * er9x - http://code.google.com/p/er9x * gruvin9x - http://code.google.com/p/gruvin9x * * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #include "board.h" #define SDRAM_MODEREG_BURST_LENGTH_1 ((uint16_t)0x0000) #define SDRAM_MODEREG_BURST_LENGTH_2 ((uint16_t)0x0001) #define SDRAM_MODEREG_BURST_LENGTH_4 ((uint16_t)0x0002) #define SDRAM_MODEREG_BURST_LENGTH_8 ((uint16_t)0x0004) #define SDRAM_MODEREG_BURST_FULL_PAGE ((uint16_t)0x0007) #define SDRAM_MODEREG_BURST_TYPE_SEQUENTIAL ((uint16_t)0x0000) #define SDRAM_MODEREG_BURST_TYPE_INTERLEAVED ((uint16_t)0x0008) #define SDRAM_MODEREG_CAS_LATENCY_1 ((uint16_t)0x0010) #define SDRAM_MODEREG_CAS_LATENCY_2 ((uint16_t)0x0020) #define SDRAM_MODEREG_CAS_LATENCY_3 ((uint16_t)0x0030) #define SDRAM_MODEREG_OPERATING_MODE_STANDARD ((uint16_t)0x0000) #define SDRAM_MODEREG_WRITEBURST_MODE_PROGRAMMED ((uint16_t)0x0000) #define SDRAM_MODEREG_WRITEBURST_MODE_SINGLE ((uint16_t)0x0200) void SDRAM_GPIOConfig(void) { /* ------------------------------------------------------------------------------------------------------------------------------------------------ PC3 <-> FMC_SDCKE0 | PD0 <-> FMC_D2 | PE0 <-> FMC_NBL0 | PF0 <-> FMC_A0 | PG0 <-> FMC_A10 | PH3 <-> FMC_SDNE0 | PI0 <-> FMC_D24 | PD1 <-> FMC_D3 | PE1 <-> FMC_NBL1 | PF1 <-> FMC_A1 | PG1 <-> FMC_A11 | PH5 <-> FMC_SDNWE | PI1 <-> FMC_D25 | PD8 <-> FMC_D13 | PE7 <-> FMC_D4 | PF2 <-> FMC_A2 | PG4 <-> FMC_BA0 | PH8 <-> FMC_D16 | PI2 <-> FMC_D26 | PD9 <-> FMC_D14 | PE8 <-> FMC_D5 | PF3 <-> FMC_A3 | PG5 <-> FMC_BA1 | PH9 <-> FMC_D17 | PI3 <-> FMC_D27 | PD10 <-> FMC_D15 | PE9 <-> FMC_D6 | PF4 <-> FMC_A4 | PG8 <-> FMC_SDCLK | PH10 <-> FMC_D18 | PI4 <-> FMC_NBL2 | PD14 <-> FMC_D0 | PE10 <-> FMC_D7 | PF5 <-> FMC_A5 | PG15 <-> FMC_NCAS | PH11 <-> FMC_D19 | PI5 <-> FMC_NBL3 | PD15 <-> FMC_D1 | PE11 <-> FMC_D8 | PF11 <-> FMC_NRAS | | PH12 <-> FMC_D20 | PI6 <-> FMC_D28 | | PE12 <-> FMC_D9 | PF12 <-> FMC_A6 | | PH13 <-> FMC_D21 | PI7 <-> FMC_D29 | | PE13 <-> FMC_D10 | PF13 <-> FMC_A7 | | PH14 <-> FMC_D22 | PI9 <-> FMC_D30 | | PE14 <-> FMC_D11 | PF14 <-> FMC_A8 | | PH15 <-> FMC_D23 | PI10 <-> FMC_D31 | | PE15 <-> FMC_D12 | PF15 <-> FMC_A9 | | | */ GPIO_InitTypeDef GPIO_InitStructure; GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF; GPIO_InitStructure.GPIO_Speed = GPIO_Speed_100MHz; GPIO_InitStructure.GPIO_OType = GPIO_OType_PP; GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL; /* GPIOC configuration */ GPIO_PinAFConfig(GPIOC, GPIO_PinSource3 , GPIO_AF_FMC); GPIO_InitStructure.GPIO_Pin = GPIO_Pin_3 ; GPIO_Init(GPIOC, &GPIO_InitStructure); /* GPIOD configuration */ GPIO_PinAFConfig(GPIOD, GPIO_PinSource0, GPIO_AF_FMC); GPIO_PinAFConfig(GPIOD, GPIO_PinSource1, GPIO_AF_FMC); GPIO_PinAFConfig(GPIOD, GPIO_PinSource8, GPIO_AF_FMC); GPIO_PinAFConfig(GPIOD, GPIO_PinSource9, GPIO_AF_FMC); GPIO_PinAFConfig(GPIOD, GPIO_PinSource10, GPIO_AF_FMC); GPIO_PinAFConfig(GPIOD, GPIO_PinSource14, GPIO_AF_FMC); GPIO_PinAFConfig(GPIOD, GPIO_PinSource15, GPIO_AF_FMC); GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_1 | GPIO_Pin_8 | GPIO_Pin_9 | GPIO_Pin_10 | GPIO_Pin_14 | GPIO_Pin_15; GPIO_Init(GPIOD, &GPIO_InitStructure); /* GPIOE configuration */ GPIO_PinAFConfig(GPIOE, GPIO_PinSource0, GPIO_AF_FMC); GPIO_PinAFConfig(GPIOE, GPIO_PinSource1, GPIO_AF_FMC); GPIO_PinAFConfig(GPIOE, GPIO_PinSource7, GPIO_AF_FMC); GPIO_PinAFConfig(GPIOE, GPIO_PinSource8, GPIO_AF_FMC); GPIO_PinAFConfig(GPIOE, GPIO_PinSource9, GPIO_AF_FMC); GPIO_PinAFConfig(GPIOE, GPIO_PinSource10, GPIO_AF_FMC); GPIO_PinAFConfig(GPIOE, GPIO_PinSource11, GPIO_AF_FMC); GPIO_PinAFConfig(GPIOE, GPIO_PinSource12, GPIO_AF_FMC); GPIO_PinAFConfig(GPIOE, GPIO_PinSource13, GPIO_AF_FMC); GPIO_PinAFConfig(GPIOE, GPIO_PinSource14, GPIO_AF_FMC); GPIO_PinAFConfig(GPIOE, GPIO_PinSource15, GPIO_AF_FMC); GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_1 | GPIO_Pin_7 | GPIO_Pin_8 | GPIO_Pin_9 | GPIO_Pin_10 | GPIO_Pin_11 | GPIO_Pin_12 | GPIO_Pin_13 | GPIO_Pin_14 | GPIO_Pin_15; GPIO_Init(GPIOE, &GPIO_InitStructure); /* GPIOF configuration */ GPIO_PinAFConfig(GPIOF, GPIO_PinSource0, GPIO_AF_FMC); GPIO_PinAFConfig(GPIOF, GPIO_PinSource1, GPIO_AF_FMC); GPIO_PinAFConfig(GPIOF, GPIO_PinSource2, GPIO_AF_FMC); GPIO_PinAFConfig(GPIOF, GPIO_PinSource3, GPIO_AF_FMC); GPIO_PinAFConfig(GPIOF, GPIO_PinSource4, GPIO_AF_FMC); GPIO_PinAFConfig(GPIOF, GPIO_PinSource5, GPIO_AF_FMC); GPIO_PinAFConfig(GPIOF, GPIO_PinSource11, GPIO_AF_FMC); GPIO_PinAFConfig(GPIOF, GPIO_PinSource12, GPIO_AF_FMC); GPIO_PinAFConfig(GPIOF, GPIO_PinSource13, GPIO_AF_FMC); GPIO_PinAFConfig(GPIOF, GPIO_PinSource14, GPIO_AF_FMC); GPIO_PinAFConfig(GPIOF, GPIO_PinSource15, GPIO_AF_FMC); GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_1 | GPIO_Pin_2 | GPIO_Pin_3 | GPIO_Pin_4 | GPIO_Pin_5 | GPIO_Pin_11 | GPIO_Pin_12 | GPIO_Pin_13 | GPIO_Pin_14 | GPIO_Pin_15; GPIO_Init(GPIOF, &GPIO_InitStructure); /* GPIOG configuration */ GPIO_PinAFConfig(GPIOG, GPIO_PinSource0 , GPIO_AF_FMC); GPIO_PinAFConfig(GPIOG, GPIO_PinSource1 , GPIO_AF_FMC); GPIO_PinAFConfig(GPIOG, GPIO_PinSource4 , GPIO_AF_FMC); GPIO_PinAFConfig(GPIOG, GPIO_PinSource5 , GPIO_AF_FMC); GPIO_PinAFConfig(GPIOG, GPIO_PinSource8 , GPIO_AF_FMC); GPIO_PinAFConfig(GPIOG, GPIO_PinSource15 , GPIO_AF_FMC); GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_1 | GPIO_Pin_4 | GPIO_Pin_5 | GPIO_Pin_8 | GPIO_Pin_15; GPIO_Init(GPIOG, &GPIO_InitStructure); /* GPIOH configuration */ GPIO_PinAFConfig(GPIOH, GPIO_PinSource3, GPIO_AF_FMC); GPIO_PinAFConfig(GPIOH, GPIO_PinSource5, GPIO_AF_FMC); GPIO_InitStructure.GPIO_Pin = GPIO_Pin_3 | GPIO_Pin_5; GPIO_Init(GPIOH, &GPIO_InitStructure); } void SDRAM_InitSequence(void) { FMC_SDRAMCommandTypeDef FMC_SDRAMCommandStructure; uint32_t tmpr = 0; /* Step 3 --------------------------------------------------------------------*/ /* Configure a clock configuration enable command */ FMC_SDRAMCommandStructure.FMC_CommandMode = FMC_Command_Mode_CLK_Enabled; FMC_SDRAMCommandStructure.FMC_CommandTarget = FMC_Command_Target_bank1; FMC_SDRAMCommandStructure.FMC_AutoRefreshNumber = 1; FMC_SDRAMCommandStructure.FMC_ModeRegisterDefinition = 0; /* Wait until the SDRAM controller is ready */ while(FMC_GetFlagStatus(FMC_Bank1_SDRAM, FMC_FLAG_Busy) != RESET) { } /* Send the command */ FMC_SDRAMCmdConfig(&FMC_SDRAMCommandStructure); /* Step 4 --------------------------------------------------------------------*/ /* Insert 100 ms delay */ delay_ms(100); /* Step 5 --------------------------------------------------------------------*/ /* Configure a PALL (precharge all) command */ FMC_SDRAMCommandStructure.FMC_CommandMode = FMC_Command_Mode_PALL; FMC_SDRAMCommandStructure.FMC_CommandTarget = FMC_Command_Target_bank1; FMC_SDRAMCommandStructure.FMC_AutoRefreshNumber = 1; FMC_SDRAMCommandStructure.FMC_ModeRegisterDefinition = 0; /* Wait until the SDRAM controller is ready */ while(FMC_GetFlagStatus(FMC_Bank1_SDRAM, FMC_FLAG_Busy) != RESET) { } /* Send the command */ FMC_SDRAMCmdConfig(&FMC_SDRAMCommandStructure); /* Step 6 --------------------------------------------------------------------*/ /* Configure a Auto-Refresh command */ FMC_SDRAMCommandStructure.FMC_CommandMode = FMC_Command_Mode_AutoRefresh; FMC_SDRAMCommandStructure.FMC_CommandTarget = FMC_Command_Target_bank1; FMC_SDRAMCommandStructure.FMC_AutoRefreshNumber = 4; FMC_SDRAMCommandStructure.FMC_ModeRegisterDefinition = 0; /* Wait until the SDRAM controller is ready */ while(FMC_GetFlagStatus(FMC_Bank1_SDRAM, FMC_FLAG_Busy) != RESET) { } /* Send the first command */ FMC_SDRAMCmdConfig(&FMC_SDRAMCommandStructure); /* Wait until the SDRAM controller is ready */ while(FMC_GetFlagStatus(FMC_Bank1_SDRAM, FMC_FLAG_Busy) != RESET) { } /* Send the second command */ FMC_SDRAMCmdConfig(&FMC_SDRAMCommandStructure); /* Step 7 --------------------------------------------------------------------*/ /* Program the external memory mode register */ tmpr = (uint32_t)SDRAM_MODEREG_BURST_LENGTH_2 | SDRAM_MODEREG_BURST_TYPE_SEQUENTIAL | SDRAM_MODEREG_CAS_LATENCY_3 | SDRAM_MODEREG_OPERATING_MODE_STANDARD | SDRAM_MODEREG_WRITEBURST_MODE_SINGLE; /* Configure a load Mode register command*/ FMC_SDRAMCommandStructure.FMC_CommandMode = FMC_Command_Mode_LoadMode; FMC_SDRAMCommandStructure.FMC_CommandTarget = FMC_Command_Target_bank1; FMC_SDRAMCommandStructure.FMC_AutoRefreshNumber = 1; FMC_SDRAMCommandStructure.FMC_ModeRegisterDefinition = tmpr; /* Wait until the SDRAM controller is ready */ while(FMC_GetFlagStatus(FMC_Bank1_SDRAM, FMC_FLAG_Busy) != RESET) { } /* Send the command */ FMC_SDRAMCmdConfig(&FMC_SDRAMCommandStructure); /* Step 8 --------------------------------------------------------------------*/ /* Set the refresh rate counter */ /* (15.62 us x Freq) - 20 */ /* Set the device refresh counter */ FMC_SetRefreshCount(683);//904 /* Wait until the SDRAM controller is ready */ while(FMC_GetFlagStatus(FMC_Bank1_SDRAM, FMC_FLAG_Busy) != RESET) { } } void SDRAM_Init(void) { //delay funcion needed delaysInit(); // Clocks must be enabled here, because the sdramInit is called before main RCC_AHB1PeriphClockCmd(SDRAM_RCC_AHB1Periph, ENABLE); RCC_AHB3PeriphClockCmd(SDRAM_RCC_AHB3Periph, ENABLE); /* GPIO configuration for FMC SDRAM bank */ SDRAM_GPIOConfig(); /* FMC Configuration ---------------------------------------------------------*/ FMC_SDRAMInitTypeDef FMC_SDRAMInitStructure; FMC_SDRAMTimingInitTypeDef FMC_SDRAMTimingInitStructure; /* FMC SDRAM Bank configuration */ /* Timing configuration for 90 Mhz of SD clock frequency (168Mhz/2) */ /* TMRD: 2 Clock cycles */ FMC_SDRAMTimingInitStructure.FMC_LoadToActiveDelay = 2; /* TXSR: min=70ns (7x11.11ns) */ FMC_SDRAMTimingInitStructure.FMC_ExitSelfRefreshDelay = 7; /* TRAS: min=42ns (4x11.11ns) max=120k (ns) */ FMC_SDRAMTimingInitStructure.FMC_SelfRefreshTime = 4; /* TRC: min=70 (7x11.11ns) */ FMC_SDRAMTimingInitStructure.FMC_RowCycleDelay = 7; /* TWR: min=1+ 7ns (1+1x11.11ns) */ FMC_SDRAMTimingInitStructure.FMC_WriteRecoveryTime = 2; /* TRP: 20ns => 2x11.11ns */ FMC_SDRAMTimingInitStructure.FMC_RPDelay = 2; /* TRCD: 20ns => 2x11.11ns */ FMC_SDRAMTimingInitStructure.FMC_RCDDelay = 2; /* FMC SDRAM control configuration */ FMC_SDRAMInitStructure.FMC_Bank = FMC_Bank1_SDRAM; /* Row addressing: [7:0] */ FMC_SDRAMInitStructure.FMC_ColumnBitsNumber = FMC_ColumnBits_Number_8b; /* Column addressing: [11:0] */ FMC_SDRAMInitStructure.FMC_RowBitsNumber = FMC_RowBits_Number_12b; FMC_SDRAMInitStructure.FMC_SDMemoryDataWidth = FMC_SDMemory_Width_16b; FMC_SDRAMInitStructure.FMC_InternalBankNumber = FMC_InternalBank_Number_4; FMC_SDRAMInitStructure.FMC_CASLatency = FMC_CAS_Latency_3; FMC_SDRAMInitStructure.FMC_WriteProtection = FMC_Write_Protection_Disable; FMC_SDRAMInitStructure.FMC_SDClockPeriod = FMC_SDClock_Period_2; FMC_SDRAMInitStructure.FMC_ReadBurst = FMC_Read_Burst_Enable; FMC_SDRAMInitStructure.FMC_ReadPipeDelay = FMC_ReadPipe_Delay_1; FMC_SDRAMInitStructure.FMC_SDRAMTimingStruct = &FMC_SDRAMTimingInitStructure; /* FMC SDRAM bank initialization */ FMC_SDRAMInit(&FMC_SDRAMInitStructure); /* FMC SDRAM device initialization sequence */ SDRAM_InitSequence(); }