/* * Copyright (C) OpenTX * * Based on code named * th9x - http://code.google.com/p/th9x * er9x - http://code.google.com/p/er9x * gruvin9x - http://code.google.com/p/gruvin9x * * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #include "../../opentx.h" #if defined(__cplusplus) && !defined(SIMU) extern "C" { #endif #include "STM32_USB-Host-Device_Lib_V2.1.0/Libraries/STM32_USB_OTG_Driver/inc/usb_dcd_int.h" #include "STM32_USB-Host-Device_Lib_V2.1.0/Libraries/STM32_USB_OTG_Driver/inc/usb_bsp.h" #if defined(__cplusplus) && !defined(SIMU) } #endif void watchdogInit(unsigned int duration) { IWDG->KR = 0x5555 ; // Unlock registers IWDG->PR = 3 ; // Divide by 32 => 1kHz clock IWDG->KR = 0x5555 ; // Unlock registers IWDG->RLR = duration ; // 1.5 seconds nominal IWDG->KR = 0xAAAA ; // reload IWDG->KR = 0xCCCC ; // start } void getCPUUniqueID(char * s) { uint32_t * cpu_uid = (uint32_t *)0x1FFF7A10; char * tmp = strAppendUnsigned(s, cpu_uid[0], 8, 16); *tmp = ' '; tmp = strAppendUnsigned(tmp+1, cpu_uid[1], 8, 16); *tmp = ' '; strAppendUnsigned(tmp+1, cpu_uid[2], 8, 16); } // Start TIMER7 at 2000000Hz void init2MhzTimer() { TIMER_2MHz_TIMER->PSC = (PERI1_FREQUENCY * TIMER_MULT_APB1) / 2000000 - 1 ; // 0.5 uS, 2 MHz TIMER_2MHz_TIMER->ARR = 65535; TIMER_2MHz_TIMER->CR2 = 0; TIMER_2MHz_TIMER->CR1 = TIM_CR1_CEN; } // Starts TIMER at 1000Hz void init1msTimer() { INTERRUPT_5MS_TIMER->ARR = 999 ; // 1mS INTERRUPT_5MS_TIMER->PSC = (PERI1_FREQUENCY * TIMER_MULT_APB1) / 1000000 - 1 ; // 1uS from 30MHz INTERRUPT_5MS_TIMER->CCER = 0 ; INTERRUPT_5MS_TIMER->CCMR1 = 0 ; INTERRUPT_5MS_TIMER->EGR = 0 ; INTERRUPT_5MS_TIMER->CR1 = 5 ; INTERRUPT_5MS_TIMER->DIER |= 1 ; NVIC_EnableIRQ(TIM8_TRG_COM_TIM14_IRQn) ; NVIC_SetPriority(TIM8_TRG_COM_TIM14_IRQn, 7); } // TODO use the same than board_sky9x.cpp void interrupt1ms() { static uint32_t pre_scale ; // Used to get 10 Hz counter ++pre_scale; if (pre_scale == 5 || pre_scale == 10) { #if defined(HAPTIC) DEBUG_TIMER_START(debugTimerHaptic); HAPTIC_HEARTBEAT(); DEBUG_TIMER_STOP(debugTimerHaptic); #endif } if ( pre_scale == 10 ) { pre_scale = 0 ; DEBUG_TIMER_START(debugTimerPer10ms); per10ms(); DEBUG_TIMER_STOP(debugTimerPer10ms); } DEBUG_TIMER_START(debugTimerRotEnc); checkRotaryEncoder(); DEBUG_TIMER_STOP(debugTimerRotEnc); } #if !defined(SIMU) extern "C" void TIM8_TRG_COM_TIM14_IRQHandler() { TIM14->SR &= ~TIM_SR_UIF ; interrupt1ms() ; DEBUG_INTERRUPT(INT_1MS); } void boardInit() { RCC_AHB1PeriphClockCmd(PWR_RCC_AHB1Periph | LED_RCC_AHB1Periph | LCD_RCC_AHB1Periph | AUDIO_RCC_AHB1Periph | KEYS_RCC_AHB1Periph_GPIO | ADC_RCC_AHB1Periph | SERIAL_RCC_AHB1Periph | TELEMETRY_RCC_AHB1Periph | TRAINER_RCC_AHB1Periph | HEARTBEAT_RCC_AHB1Periph | AUDIO_RCC_AHB1Periph | HAPTIC_RCC_AHB1Periph | INTMODULE_RCC_AHB1Periph | EXTMODULE_RCC_AHB1Periph, ENABLE); RCC_APB1PeriphClockCmd(INTERRUPT_5MS_APB1Periph | TIMER_2MHz_APB1Periph | AUDIO_RCC_APB1Periph | SERIAL_RCC_APB1Periph | TELEMETRY_RCC_APB1Periph | TRAINER_RCC_APB1Periph | AUDIO_RCC_APB1Periph | EXTMODULE_RCC_APB1Periph, ENABLE); RCC_APB2PeriphClockCmd(LCD_RCC_APB2Periph | ADC_RCC_APB2Periph | HAPTIC_RCC_APB2Periph | INTMODULE_RCC_APB2Periph | EXTMODULE_RCC_APB2Periph, ENABLE); pwrInit(); delaysInit(); // FrSky removed the volume chip in latest board, that's why it doesn't answer! // i2cInit(); serial2Init(0, 0); // default serial mode (None if DEBUG not defined) __enable_irq(); TRACE("Horus started :)"); keysInit(); adcInit(); lcdInit(); audioInit(); init2MhzTimer(); init1msTimer(); usbInit(); hapticInit(); // bt_open(); #if defined(DEBUG) DBGMCU_APB1PeriphConfig(DBGMCU_IWDG_STOP|DBGMCU_TIM1_STOP|DBGMCU_TIM2_STOP|DBGMCU_TIM3_STOP|DBGMCU_TIM4_STOP|DBGMCU_TIM5_STOP|DBGMCU_TIM6_STOP|DBGMCU_TIM7_STOP|DBGMCU_TIM8_STOP|DBGMCU_TIM9_STOP|DBGMCU_TIM10_STOP|DBGMCU_TIM11_STOP|DBGMCU_TIM12_STOP|DBGMCU_TIM13_STOP|DBGMCU_TIM14_STOP, ENABLE); #endif ledBlue(); } void boardOff() { BACKLIGHT_OFF(); while (pwrPressed()) { wdt_reset(); } SysTick->CTRL = 0; // turn off systick pwrOff(); } #endif // #if !defined(SIMU) #if defined(USB_JOYSTICK) && !defined(SIMU) extern USB_OTG_CORE_HANDLE USB_OTG_dev; /* Prepare and send new USB data packet The format of HID_Buffer is defined by USB endpoint description can be found in file usb_hid_joystick.c, variable HID_JOYSTICK_ReportDesc */ void usbJoystickUpdate(void) { static uint8_t HID_Buffer[HID_IN_PACKET]; //buttons HID_Buffer[0] = 0; //buttons for (int i = 0; i < 8; ++i) { if ( channelOutputs[i+8] > 0 ) { HID_Buffer[0] |= (1 << i); } } //analog values //uint8_t * p = HID_Buffer + 1; for (int i = 0; i < 8; ++i) { int16_t value = channelOutputs[i] / 8; if ( value > 127 ) value = 127; else if ( value < -127 ) value = -127; HID_Buffer[i+1] = static_cast(value); } USBD_HID_SendReport (&USB_OTG_dev, HID_Buffer, HID_IN_PACKET ); } #endif //#if defined(USB_JOYSTICK) && defined(PCBTARANIS) && !defined(SIMU) uint8_t currentTrainerMode = 0xff; void checkTrainerSettings() { uint8_t requiredTrainerMode = g_model.trainerMode; if (requiredTrainerMode != currentTrainerMode) { switch (currentTrainerMode) { case TRAINER_MODE_MASTER_TRAINER_JACK: stop_trainer_capture(); break; case TRAINER_MODE_SLAVE: stop_trainer_ppm(); break; case TRAINER_MODE_MASTER_CPPM_EXTERNAL_MODULE: stop_cppm_on_heartbeat_capture() ; break; case TRAINER_MODE_MASTER_BATTERY_COMPARTMENT: serial2Stop(); } currentTrainerMode = requiredTrainerMode; switch (requiredTrainerMode) { case TRAINER_MODE_SLAVE: init_trainer_ppm(); break; case TRAINER_MODE_MASTER_CPPM_EXTERNAL_MODULE: init_cppm_on_heartbeat_capture() ; break; case TRAINER_MODE_MASTER_BATTERY_COMPARTMENT: if (g_eeGeneral.serial2Mode == UART_MODE_SBUS_TRAINER) { serial2SbusInit(); break; } // no break default: // master is default init_trainer_capture(); break; } } } uint16_t getBatteryVoltage() { int32_t instant_vbat = anaIn(TX_VOLTAGE); // using filtered ADC value on purpose return (uint16_t)((instant_vbat * (1000 + g_eeGeneral.txVoltageCalibration) ) / 1629); }