/* * Copyright (C) EdgeTX * * Based on code named * opentx - https://github.com/opentx/opentx * th9x - http://code.google.com/p/th9x * er9x - http://code.google.com/p/er9x * gruvin9x - http://code.google.com/p/gruvin9x * * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #include "bootloader/boot.h" #include "flash_driver.h" #include "hal/flash_driver.h" #include "stm32_adc.h" #include "stm32_gpio.h" #include "board.h" #include "boards/generic_stm32/module_ports.h" #include "hal/adc_driver.h" #include "hal/trainer_driver.h" #include "hal/switch_driver.h" #include "hal/abnormal_reboot.h" #include "hal/watchdog_driver.h" #include "hal/usb_driver.h" #include "hal/gpio.h" #include "globals.h" #include "sdcard.h" #include "touch.h" #include "debug.h" #include "timers_driver.h" #include "tp_gt911.h" #include "extram_driver.h" #include "extflash_driver.h" #include "bitmapbuffer.h" #include "colors.h" #include // common ADC driver extern const etx_hal_adc_driver_t _adc_driver; // User button (B2) #define BL_KEY GPIO_PIN(GPIOC, 13) bool boardBLStartCondition() { gpio_init(BL_KEY, GPIO_IN, 0); return gpio_read(BL_KEY); } void boardBLPreJump() { timersInit(); ExtFLASH_Init(); ExtRAM_Init(); // Stop 1ms timer MS_TIMER->CR1 &= ~TIM_CR1_CEN; } void boardBLInit() { ExtFLASH_Init(); ExtRAM_Init(); // register external FLASH for DFU usbRegisterDFUMedia((void*)extflash_dfu_media); // register internal & external FLASH for UF2 flashRegisterDriver(0x08000000, 2 * 1024 * 1024, &stm32_flash_driver); flashRegisterDriver(0x70000000, 256 * 1024 * 1024, &extflash_driver); } void boardInit() { // enable interrupts __enable_irq(); #if defined(DEBUG) serialSetMode(SP_AUX1, UART_MODE_DEBUG); // indicate AUX1 is used serialInit(SP_AUX1, UART_MODE_DEBUG); // early AUX1 init #endif boardInitModulePorts(); delaysInit(); timersInit(); ExtFLASH_InitRuntime(); // register internal & external FLASH for UF2 flashRegisterDriver(0x08000000, 2 * 1024 * 1024, &stm32_flash_driver); flashRegisterDriver(0x70000000, 256 * 1024 * 1024, &extflash_driver); usbInit(); keysInit(); switchInit(); audioInit(); adcInit(&_adc_driver); setAnalogValue(adcGetInputOffset(ADC_INPUT_VBAT), 840 * 2); setAnalogValue(adcGetInputOffset(ADC_INPUT_RTC_BAT), 300 * 2); // hapticInit(); #if defined(RTCLOCK) rtcInit(); // RTC must be initialized before rambackupRestore() is called #endif delay_ms(50); // GT911 is a bit slow on power ON touchPanelInit(); } extern void rtcDisableBackupReg(); void boardOff() { // lcdOff(); while (pwrPressed()) { WDG_RESET(); } SysTick->CTRL = 0; // turn off systick #if defined(HAPTIC) // Shutdown the Haptic hapticDone(); #endif rtcDisableBackupReg(); pwrOff(); // We reach here only in forced power situations, such as hw-debugging with external power // Enter STM32 stop mode / deep-sleep // Code snippet from ST Nucleo PWR_EnterStopMode example #define PDMode 0x00000000U #if defined(PWR_CR1_MRUDS) && defined(PWR_CR1_LPUDS) && defined(PWR_CR1_FPDS) MODIFY_REG(PWR->CR1, (PWR_CR1_PDDS | PWR_CR1_LPDS | PWR_CR1_FPDS | PWR_CR1_LPUDS | PWR_CR1_MRUDS), PDMode); #elif defined(PWR_CR_MRLVDS) && defined(PWR_CR_LPLVDS) && defined(PWR_CR_FPDS) MODIFY_REG(PWR->CR1, (PWR_CR1_PDDS | PWR_CR1_LPDS | PWR_CR1_FPDS | PWR_CR1_LPLVDS | PWR_CR1_MRLVDS), PDMode); #else // MODIFY_REG(PWR->CR1, (PWR_CR1_P_PDDS| PWR_CR1_LPDS), PDMode); #endif /* PWR_CR_MRUDS && PWR_CR_LPUDS && PWR_CR_FPDS */ /* Set SLEEPDEEP bit of Cortex System Control Register */ SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); // To avoid HardFault at return address, end in an endless loop while (1) { } } #if !defined(BOOT) void per5ms() {} #endif