/* * Copyright (C) EdgeTX * * Based on code named * opentx - https://github.com/opentx/opentx * th9x - http://code.google.com/p/th9x * er9x - http://code.google.com/p/er9x * gruvin9x - http://code.google.com/p/gruvin9x * * License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #pragma once #define AFHDS3_MAX_CHANNELS 18 namespace afhds3 { PACK(struct sSES_PWMFrequencyV0 { uint16_t Frequency : 15; // From 50 to 400Hz uint16_t Synchronized : 1; // 1=Synchronize the PWM output to the RF cycle // (lower latency but unstable frequency) }); enum eSES_PA_SetAnalogOutput { SES_ANALOG_OUTPUT_PWM = 0, SES_ANALOG_OUTPUT_PPM }; enum eEB_BusType : uint8_t { EB_BT_IBUS1=0, EB_BT_IBUS1_OUT = EB_BT_IBUS1, EB_BT_IBUS2, EB_BT_IBUS1_IN = EB_BT_IBUS2, EB_BT_SBUS1 }; enum BUS_DIR { BUS_OUT, BUS_IN, }; // 48 bytes PACK(struct sDATA_ConfigV0 { uint8_t Version; // =0 uint8_t EMIStandard; // eLNK_EMIStandard uint8_t IsTwoWay; uint8_t PhyMode; // eDATA_PHYMODE uint8_t SignalStrengthRCChannelNb; // 0xFF if not used, 0`18 uint16_t FailsafeTimeout; // in unit of ms int16_t FailSafe[AFHDS3_MAX_CHANNELS]; uint8_t FailsafeOutputMode; //TRUE Or FALSE sSES_PWMFrequencyV0 PWMFrequency; uint8_t AnalogOutput; // eSES_PA_SetAnalogOutput eEB_BusType ExternalBusType; // eEB_BusType }); #define SES_NB_MAX_CHANNELS (32) #define SES_NPT_NB_MAX_PORTS (4) enum eSES_NewPortType { SES_NPT_PWM, SES_NPT_PPM, SES_NPT_SBUS, SES_NPT_IBUS1_IN, SES_NPT_IBUS1_OUT, SES_NPT_IBUS2, SES_NPT_IBUS2_HUB_PORT, SES_NPT_WSTX, SES_NPT_WSRX, SES_NPT_NONE=0xFF }; enum DirtyConfig { DC_RX_CMD_TX_PWR, DC_RX_CMD_FAILSAFE_VALUE, DC_RX_CMD_FAILSAFE_TIME, DC_RX_CMD_RSSI_CHANNEL_SETUP, DC_RX_CMD_RANGE, DC_RX_CMD_GET_CAPABILITIES, DC_RX_CMD_OUT_PWM_PPM_MODE, DC_RX_CMD_FREQUENCY_V0, DC_RX_CMD_PORT_TYPE_V1, DC_RX_CMD_FREQUENCY_V1, DC_RX_CMD_FREQUENCY_V1_2, DC_RX_CMD_BUS_TYPE_V0, DC_RX_CMD_BUS_TYPE_V0_2, DC_RX_CMD_IBUS_SETUP, DC_RX_CMD_BUS_DIRECTION, DC_RX_CMD_BUS_FAILSAFE, DC_RX_CMD_GET_VERSION, DC_RX_CMD_GET_RX_VERSION }; #define SET_AND_SYNC(cfg, value, dirtyCmd) [=](int32_t newValue) { value = newValue; cfg->others.dirtyFlag |= (uint32_t) 1 << dirtyCmd; } #define GET_SET_AND_SYNC(cfg, value, dirtyCmd) GET_DEFAULT(value), SET_AND_SYNC(cfg, value, dirtyCmd) #define DIRTY_CMD(cfg, dirtyCmd) cfg->others.dirtyFlag |= (uint32_t) 1 << dirtyCmd; PACK(struct sSES_PWMFrequenciesAPPV1 { // One unsigned short per // channel, From 50 to 400Hz, // 1:1000Hz,2:833Hz uint16_t PWMFrequencies[SES_NB_MAX_CHANNELS]; // 1 bit per channel, 32 channels total uint32_t Synchronized; }); // 116 bytes PACK(struct sDATA_ConfigV1 { uint8_t Version; // =1 uint8_t EMIStandard; // eLNK_EMIStandard uint8_t IsTwoWay; uint8_t PhyMode; // eDATA_PHYMODE uint8_t SignalStrengthRCChannelNb; // 0xFF if not used , 0`18 uint16_t FailsafeTimeout; // in unit of ms int16_t FailSafe[AFHDS3_MAX_CHANNELS]; uint8_t FailsafeOutputMode; // TRUE Or FALSE uint8_t NewPortTypes[SES_NPT_NB_MAX_PORTS]; // eSES_NewPortType sSES_PWMFrequenciesAPPV1 PWMFrequenciesV1; }); PACK(struct sDATA_Others { uint8_t buffer[sizeof(sDATA_ConfigV1)]; uint8_t ExternalBusType; // eEB_BusType IBUS1:0;IBUS2:1(Not supported yet);SBUS:2 tmr10ms_t lastUpdated; // last updated time bool isConnected; // specify if receiver is connected uint32_t dirtyFlag; // mapped to commands that need to be issued to sync settings }); union Config_u { uint8_t version; sDATA_ConfigV0 v0; sDATA_ConfigV1 v1; uint8_t buffer[sizeof(sDATA_ConfigV1)]; sDATA_Others others; }; Config_u* getConfig(uint8_t moduleIdx); void applyModelConfig(uint8_t moduleIdx); };