442 lines
15 KiB
C++
442 lines
15 KiB
C++
/*
|
|
* Copyright (C) EdgeTX
|
|
*
|
|
* Based on code named
|
|
* opentx - https://github.com/opentx/opentx
|
|
* th9x - http://code.google.com/p/th9x
|
|
* er9x - http://code.google.com/p/er9x
|
|
* gruvin9x - http://code.google.com/p/gruvin9x
|
|
*
|
|
* License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include "opentx.h"
|
|
|
|
#include "fifo.h"
|
|
#include "dmafifo.h"
|
|
|
|
Fifo<uint8_t, TELEMETRY_FIFO_SIZE> telemetryNoDMAFifo;
|
|
uint32_t telemetryErrors = 0;
|
|
|
|
#if defined(PCBX12S)
|
|
DMAFifo<TELEMETRY_FIFO_SIZE> telemetryDMAFifo __DMA (TELEMETRY_DMA_Stream_RX);
|
|
uint8_t telemetryFifoMode;
|
|
#endif
|
|
|
|
static void telemetryInitDirPin()
|
|
{
|
|
GPIO_InitTypeDef GPIO_InitStructure;
|
|
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT;
|
|
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
|
|
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
|
|
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
|
|
GPIO_InitStructure.GPIO_Pin = TELEMETRY_DIR_GPIO_PIN;
|
|
GPIO_Init(TELEMETRY_DIR_GPIO, &GPIO_InitStructure);
|
|
GPIO_ResetBits(TELEMETRY_DIR_GPIO, TELEMETRY_DIR_GPIO_PIN);
|
|
}
|
|
|
|
void telemetryPortInit(uint32_t baudrate, uint8_t mode)
|
|
{
|
|
if (baudrate == 0) {
|
|
USART_DeInit(TELEMETRY_USART);
|
|
return;
|
|
}
|
|
//deinit inverted mode
|
|
telemetryPortInvertedInit(0);
|
|
NVIC_InitTypeDef NVIC_InitStructure;
|
|
NVIC_InitStructure.NVIC_IRQChannel = TELEMETRY_DMA_TX_Stream_IRQ;
|
|
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1;
|
|
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0; /* Not used as 4 bits are used for the pre-emption priority. */;
|
|
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
|
|
NVIC_Init(&NVIC_InitStructure);
|
|
|
|
USART_InitTypeDef USART_InitStructure;
|
|
GPIO_InitTypeDef GPIO_InitStructure;
|
|
|
|
GPIO_PinAFConfig(TELEMETRY_GPIO, TELEMETRY_GPIO_PinSource_RX, TELEMETRY_GPIO_AF);
|
|
GPIO_PinAFConfig(TELEMETRY_GPIO, TELEMETRY_GPIO_PinSource_TX, TELEMETRY_GPIO_AF);
|
|
|
|
GPIO_InitStructure.GPIO_Pin = TELEMETRY_TX_GPIO_PIN | TELEMETRY_RX_GPIO_PIN;
|
|
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
|
|
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
|
|
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP;
|
|
GPIO_InitStructure.GPIO_Speed = baudrate <= 400000 ? GPIO_Speed_2MHz : GPIO_Speed_25MHz;
|
|
GPIO_Init(TELEMETRY_GPIO, &GPIO_InitStructure);
|
|
|
|
telemetryInitDirPin();
|
|
|
|
USART_DeInit(TELEMETRY_USART);
|
|
|
|
USART_OverSampling8Cmd(TELEMETRY_USART, baudrate <= 400000 ? DISABLE : ENABLE);
|
|
|
|
USART_InitStructure.USART_BaudRate = baudrate;
|
|
if (mode & TELEMETRY_SERIAL_8E2) {
|
|
USART_InitStructure.USART_WordLength = USART_WordLength_9b;
|
|
USART_InitStructure.USART_StopBits = USART_StopBits_2;
|
|
USART_InitStructure.USART_Parity = USART_Parity_Even;
|
|
}
|
|
else {
|
|
USART_InitStructure.USART_WordLength = USART_WordLength_8b;
|
|
USART_InitStructure.USART_StopBits = USART_StopBits_1;
|
|
USART_InitStructure.USART_Parity = USART_Parity_No;
|
|
}
|
|
USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
|
|
USART_InitStructure.USART_Mode = USART_Mode_Tx | USART_Mode_Rx;
|
|
USART_Init(TELEMETRY_USART, &USART_InitStructure);
|
|
|
|
#if defined(PCBX12S)
|
|
telemetryFifoMode = mode;
|
|
|
|
DMA_Cmd(TELEMETRY_DMA_Stream_RX, DISABLE);
|
|
USART_DMACmd(TELEMETRY_USART, USART_DMAReq_Rx, DISABLE);
|
|
DMA_DeInit(TELEMETRY_DMA_Stream_RX);
|
|
|
|
if (mode & TELEMETRY_SERIAL_WITHOUT_DMA) {
|
|
USART_Cmd(TELEMETRY_USART, ENABLE);
|
|
USART_ITConfig(TELEMETRY_USART, USART_IT_RXNE, ENABLE);
|
|
NVIC_SetPriority(TELEMETRY_USART_IRQn, 6);
|
|
NVIC_EnableIRQ(TELEMETRY_USART_IRQn);
|
|
}
|
|
else {
|
|
DMA_InitTypeDef DMA_InitStructure;
|
|
telemetryDMAFifo.clear();
|
|
|
|
USART_ITConfig(TELEMETRY_USART, USART_IT_RXNE, DISABLE);
|
|
USART_ITConfig(TELEMETRY_USART, USART_IT_TXE, DISABLE);
|
|
NVIC_SetPriority(TELEMETRY_USART_IRQn, 6);
|
|
NVIC_EnableIRQ(TELEMETRY_USART_IRQn);
|
|
|
|
DMA_InitStructure.DMA_Channel = TELEMETRY_DMA_Channel_RX;
|
|
DMA_InitStructure.DMA_PeripheralBaseAddr = CONVERT_PTR_UINT(&TELEMETRY_USART->DR);
|
|
DMA_InitStructure.DMA_Memory0BaseAddr = CONVERT_PTR_UINT(telemetryDMAFifo.buffer());
|
|
DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralToMemory;
|
|
DMA_InitStructure.DMA_BufferSize = telemetryDMAFifo.size();
|
|
DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
|
|
DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable;
|
|
DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte;
|
|
DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte;
|
|
DMA_InitStructure.DMA_Mode = DMA_Mode_Circular;
|
|
DMA_InitStructure.DMA_Priority = DMA_Priority_Low;
|
|
DMA_InitStructure.DMA_FIFOMode = DMA_FIFOMode_Disable;
|
|
DMA_InitStructure.DMA_FIFOThreshold = DMA_FIFOThreshold_Full;
|
|
DMA_InitStructure.DMA_MemoryBurst = DMA_MemoryBurst_Single;
|
|
DMA_InitStructure.DMA_PeripheralBurst = DMA_PeripheralBurst_Single;
|
|
DMA_Init(TELEMETRY_DMA_Stream_RX, &DMA_InitStructure);
|
|
USART_DMACmd(TELEMETRY_USART, USART_DMAReq_Rx, ENABLE);
|
|
USART_Cmd(TELEMETRY_USART, ENABLE);
|
|
DMA_Cmd(TELEMETRY_DMA_Stream_RX, ENABLE);
|
|
}
|
|
#else
|
|
USART_Cmd(TELEMETRY_USART, ENABLE);
|
|
USART_ITConfig(TELEMETRY_USART, USART_IT_RXNE, ENABLE);
|
|
NVIC_SetPriority(TELEMETRY_USART_IRQn, 6);
|
|
NVIC_EnableIRQ(TELEMETRY_USART_IRQn);
|
|
#endif
|
|
}
|
|
|
|
// soft serial vars
|
|
static uint8_t rxBitCount;
|
|
static uint8_t rxByte;
|
|
// single bit length expresses in half us
|
|
static uint16_t bitLength;
|
|
static uint16_t probeTimeFromStartBit;
|
|
|
|
void telemetryPortInvertedInit(uint32_t baudrate)
|
|
{
|
|
if (baudrate == 0) {
|
|
NVIC_DisableIRQ(TELEMETRY_EXTI_IRQn);
|
|
NVIC_DisableIRQ(TELEMETRY_TIMER_IRQn);
|
|
|
|
EXTI_InitTypeDef EXTI_InitStructure;
|
|
EXTI_StructInit(&EXTI_InitStructure);
|
|
EXTI_InitStructure.EXTI_Line = TELEMETRY_EXTI_LINE;
|
|
EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt;
|
|
EXTI_InitStructure.EXTI_Trigger = TELEMETRY_EXTI_TRIGGER;
|
|
EXTI_InitStructure.EXTI_LineCmd = DISABLE;
|
|
EXTI_Init(&EXTI_InitStructure);
|
|
return;
|
|
}
|
|
|
|
rxBitCount = 0;
|
|
|
|
switch(baudrate) {
|
|
case 115200:
|
|
bitLength = 17;
|
|
probeTimeFromStartBit = 23; //because pin is not probed immediately
|
|
break;
|
|
case 57600:
|
|
bitLength = 35; //34 was used before - I prefer to use use 35 because of lower error
|
|
probeTimeFromStartBit = 48; // 48 used in original implementation
|
|
break;
|
|
default:
|
|
bitLength = 2000000/baudrate; //because of 0,5 us tick
|
|
probeTimeFromStartBit = 3000000/baudrate;
|
|
}
|
|
|
|
// configure bit sample timer
|
|
TELEMETRY_TIMER->PSC = (PERI2_FREQUENCY * TIMER_MULT_APB2) / 2000000 - 1; // 0.5uS
|
|
TELEMETRY_TIMER->CCER = 0;
|
|
TELEMETRY_TIMER->CCMR1 = 0;
|
|
TELEMETRY_TIMER->CR1 = TIM_CR1_CEN;
|
|
TELEMETRY_TIMER->DIER = TIM_DIER_UIE;
|
|
|
|
NVIC_SetPriority(TELEMETRY_TIMER_IRQn, 0);
|
|
NVIC_EnableIRQ(TELEMETRY_TIMER_IRQn);
|
|
|
|
// init TELEMETRY_RX_GPIO_PIN
|
|
GPIO_InitTypeDef GPIO_InitStructure;
|
|
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN;
|
|
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
|
|
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
|
|
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_DOWN;
|
|
GPIO_InitStructure.GPIO_Pin = TELEMETRY_RX_GPIO_PIN;
|
|
GPIO_Init(TELEMETRY_GPIO, &GPIO_InitStructure);
|
|
|
|
telemetryInitDirPin();
|
|
|
|
// Connect EXTI line to TELEMETRY RX pin
|
|
SYSCFG_EXTILineConfig(TELEMETRY_EXTI_PortSource, TELEMETRY_EXTI_PinSource);
|
|
|
|
// Configure EXTI for raising edge (start bit)
|
|
EXTI_InitTypeDef EXTI_InitStructure;
|
|
EXTI_StructInit(&EXTI_InitStructure);
|
|
EXTI_InitStructure.EXTI_Line = TELEMETRY_EXTI_LINE;
|
|
EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt;
|
|
EXTI_InitStructure.EXTI_Trigger = TELEMETRY_EXTI_TRIGGER;
|
|
EXTI_InitStructure.EXTI_LineCmd = ENABLE;
|
|
EXTI_Init(&EXTI_InitStructure);
|
|
|
|
NVIC_SetPriority(TELEMETRY_EXTI_IRQn, 0);
|
|
NVIC_EnableIRQ(TELEMETRY_EXTI_IRQn);
|
|
}
|
|
|
|
void telemetryPortInvertedRxBit()
|
|
{
|
|
if (rxBitCount < 8) {
|
|
if (rxBitCount == 0) {
|
|
TELEMETRY_TIMER->ARR = bitLength;
|
|
rxByte = 0;
|
|
}
|
|
else {
|
|
rxByte >>= 1;
|
|
}
|
|
|
|
if (GPIO_ReadInputDataBit(TELEMETRY_GPIO, TELEMETRY_RX_GPIO_PIN) == Bit_RESET)
|
|
rxByte |= 0x80;
|
|
|
|
++rxBitCount;
|
|
}
|
|
else if (rxBitCount == 8) {
|
|
telemetryNoDMAFifo.push(rxByte);
|
|
rxBitCount = 0;
|
|
|
|
// disable timer
|
|
TELEMETRY_TIMER->CR1 &= ~TIM_CR1_CEN;
|
|
|
|
// re-enable start bit interrupt
|
|
EXTI->IMR |= EXTI_IMR_MR6;
|
|
}
|
|
}
|
|
|
|
void telemetryPortSetDirectionOutput()
|
|
{
|
|
#if defined(GHOST) && SPORT_MAX_BAUDRATE < 400000
|
|
if (isModuleGhost(EXTERNAL_MODULE)) {
|
|
TELEMETRY_USART->BRR = BRR_400K;
|
|
}
|
|
#endif
|
|
TELEMETRY_DIR_GPIO->BSRRL = TELEMETRY_DIR_GPIO_PIN; // output enable
|
|
TELEMETRY_USART->CR1 &= ~USART_CR1_RE; // turn off receiver
|
|
}
|
|
|
|
void sportWaitTransmissionComplete()
|
|
{
|
|
while (!(TELEMETRY_USART->SR & USART_SR_TC));
|
|
}
|
|
|
|
void telemetryPortSetDirectionInput()
|
|
{
|
|
sportWaitTransmissionComplete();
|
|
#if defined(GHOST) && SPORT_MAX_BAUDRATE < 400000
|
|
if (isModuleGhost(EXTERNAL_MODULE) && g_model.moduleData[EXTERNAL_MODULE].crsf.telemetryBaudrate == GHST_TELEMETRY_RATE_115K) {
|
|
TELEMETRY_USART->BRR = BRR_115K;
|
|
}
|
|
#endif
|
|
TELEMETRY_DIR_GPIO->BSRRH = TELEMETRY_DIR_GPIO_PIN; // output disable
|
|
TELEMETRY_USART->CR1 |= USART_CR1_RE; // turn on receiver
|
|
}
|
|
|
|
void sportSendByte(uint8_t byte)
|
|
{
|
|
telemetryPortSetDirectionOutput();
|
|
|
|
while (!(TELEMETRY_USART->SR & USART_SR_TXE));
|
|
USART_SendData(TELEMETRY_USART, byte);
|
|
}
|
|
|
|
void sportSendByteLoop(uint8_t byte)
|
|
{
|
|
telemetryPortSetDirectionOutput();
|
|
|
|
outputTelemetryBuffer.data[0] = byte;
|
|
|
|
DMA_InitTypeDef DMA_InitStructure;
|
|
DMA_DeInit(TELEMETRY_DMA_Stream_TX);
|
|
DMA_InitStructure.DMA_Channel = TELEMETRY_DMA_Channel_TX;
|
|
DMA_InitStructure.DMA_PeripheralBaseAddr = CONVERT_PTR_UINT(&TELEMETRY_USART->DR);
|
|
DMA_InitStructure.DMA_DIR = DMA_DIR_MemoryToPeripheral;
|
|
DMA_InitStructure.DMA_Memory0BaseAddr = CONVERT_PTR_UINT(outputTelemetryBuffer.data);
|
|
DMA_InitStructure.DMA_BufferSize = 1;
|
|
DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
|
|
DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Disable;
|
|
DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte;
|
|
DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte;
|
|
DMA_InitStructure.DMA_Mode = DMA_Mode_Circular;
|
|
DMA_InitStructure.DMA_Priority = DMA_Priority_VeryHigh;
|
|
DMA_InitStructure.DMA_FIFOMode = DMA_FIFOMode_Disable;
|
|
DMA_InitStructure.DMA_FIFOThreshold = DMA_FIFOThreshold_Full;
|
|
DMA_InitStructure.DMA_MemoryBurst = DMA_MemoryBurst_Single;
|
|
DMA_InitStructure.DMA_PeripheralBurst = DMA_PeripheralBurst_Single;
|
|
DMA_Init(TELEMETRY_DMA_Stream_TX, &DMA_InitStructure);
|
|
DMA_Cmd(TELEMETRY_DMA_Stream_TX, ENABLE);
|
|
USART_DMACmd(TELEMETRY_USART, USART_DMAReq_Tx, ENABLE);
|
|
}
|
|
|
|
void sportSendBuffer(const uint8_t * buffer, uint32_t count)
|
|
{
|
|
telemetryPortSetDirectionOutput();
|
|
|
|
DMA_InitTypeDef DMA_InitStructure;
|
|
DMA_DeInit(TELEMETRY_DMA_Stream_TX);
|
|
DMA_InitStructure.DMA_Channel = TELEMETRY_DMA_Channel_TX;
|
|
DMA_InitStructure.DMA_PeripheralBaseAddr = CONVERT_PTR_UINT(&TELEMETRY_USART->DR);
|
|
DMA_InitStructure.DMA_DIR = DMA_DIR_MemoryToPeripheral;
|
|
DMA_InitStructure.DMA_Memory0BaseAddr = CONVERT_PTR_UINT(buffer);
|
|
DMA_InitStructure.DMA_BufferSize = count;
|
|
DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
|
|
DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable;
|
|
DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte;
|
|
DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte;
|
|
DMA_InitStructure.DMA_Mode = DMA_Mode_Normal;
|
|
DMA_InitStructure.DMA_Priority = DMA_Priority_VeryHigh;
|
|
DMA_InitStructure.DMA_FIFOMode = DMA_FIFOMode_Disable;
|
|
DMA_InitStructure.DMA_FIFOThreshold = DMA_FIFOThreshold_Full;
|
|
DMA_InitStructure.DMA_MemoryBurst = DMA_MemoryBurst_Single;
|
|
DMA_InitStructure.DMA_PeripheralBurst = DMA_PeripheralBurst_Single;
|
|
DMA_Init(TELEMETRY_DMA_Stream_TX, &DMA_InitStructure);
|
|
DMA_Cmd(TELEMETRY_DMA_Stream_TX, ENABLE);
|
|
USART_DMACmd(TELEMETRY_USART, USART_DMAReq_Tx, ENABLE);
|
|
DMA_ITConfig(TELEMETRY_DMA_Stream_TX, DMA_IT_TC, ENABLE);
|
|
|
|
// enable interrupt and set it's priority
|
|
NVIC_EnableIRQ(TELEMETRY_DMA_TX_Stream_IRQ) ;
|
|
NVIC_SetPriority(TELEMETRY_DMA_TX_Stream_IRQ, 7);
|
|
}
|
|
|
|
extern "C" void TELEMETRY_DMA_TX_IRQHandler(void)
|
|
{
|
|
DEBUG_INTERRUPT(INT_TELEM_DMA);
|
|
if (DMA_GetITStatus(TELEMETRY_DMA_Stream_TX, TELEMETRY_DMA_TX_FLAG_TC)) {
|
|
DMA_ClearITPendingBit(TELEMETRY_DMA_Stream_TX, TELEMETRY_DMA_TX_FLAG_TC);
|
|
|
|
// clear TC flag before enabling interrupt
|
|
TELEMETRY_USART->SR &= ~USART_SR_TC;
|
|
TELEMETRY_USART->CR1 |= USART_CR1_TCIE;
|
|
|
|
if (telemetryProtocol == PROTOCOL_TELEMETRY_FRSKY_SPORT) {
|
|
outputTelemetryBuffer.reset();
|
|
}
|
|
}
|
|
}
|
|
|
|
#define USART_FLAG_ERRORS (USART_FLAG_ORE | USART_FLAG_NE | USART_FLAG_FE | USART_FLAG_PE)
|
|
extern "C" void TELEMETRY_USART_IRQHandler(void)
|
|
{
|
|
DEBUG_INTERRUPT(INT_TELEM_USART);
|
|
uint32_t status = TELEMETRY_USART->SR;
|
|
|
|
if ((status & USART_SR_TC) && (TELEMETRY_USART->CR1 & USART_CR1_TCIE)) {
|
|
TELEMETRY_USART->CR1 &= ~USART_CR1_TCIE;
|
|
telemetryPortSetDirectionInput();
|
|
while (status & (USART_FLAG_RXNE)) {
|
|
status = TELEMETRY_USART->DR;
|
|
status = TELEMETRY_USART->SR;
|
|
}
|
|
}
|
|
|
|
while (status & (USART_FLAG_RXNE | USART_FLAG_ERRORS)) {
|
|
uint8_t data = TELEMETRY_USART->DR;
|
|
if (status & USART_FLAG_ERRORS) {
|
|
telemetryErrors++;
|
|
}
|
|
else {
|
|
telemetryNoDMAFifo.push(data);
|
|
#if defined(LUA)
|
|
if (telemetryProtocol == PROTOCOL_TELEMETRY_FRSKY_SPORT) {
|
|
static uint8_t prevdata;
|
|
if (prevdata == 0x7E && outputTelemetryBuffer.size > 0 && outputTelemetryBuffer.destination == TELEMETRY_ENDPOINT_SPORT && data == outputTelemetryBuffer.sport.physicalId) {
|
|
sportSendBuffer(outputTelemetryBuffer.data + 1, outputTelemetryBuffer.size - 1);
|
|
}
|
|
prevdata = data;
|
|
}
|
|
#endif
|
|
}
|
|
status = TELEMETRY_USART->SR;
|
|
}
|
|
}
|
|
|
|
extern "C" void TELEMETRY_EXTI_IRQHandler(void)
|
|
{
|
|
if (EXTI_GetITStatus(TELEMETRY_EXTI_LINE) != RESET) {
|
|
|
|
if (rxBitCount == 0) {
|
|
|
|
TELEMETRY_TIMER->ARR = probeTimeFromStartBit; // 1,5 cycle from start at 57600bps
|
|
TELEMETRY_TIMER->CR1 |= TIM_CR1_CEN;
|
|
|
|
// disable start bit interrupt
|
|
EXTI->IMR &= ~EXTI_IMR_MR6;
|
|
}
|
|
|
|
EXTI_ClearITPendingBit(TELEMETRY_EXTI_LINE);
|
|
}
|
|
}
|
|
|
|
extern "C" void TELEMETRY_TIMER_IRQHandler()
|
|
{
|
|
TELEMETRY_TIMER->SR &= ~TIM_SR_UIF;
|
|
telemetryPortInvertedRxBit();
|
|
}
|
|
|
|
// TODO we should have telemetry in an higher layer, functions above should move to a sport_driver.cpp
|
|
bool sportGetByte(uint8_t * byte)
|
|
{
|
|
#if defined(PCBX12S)
|
|
if (telemetryFifoMode & TELEMETRY_SERIAL_WITHOUT_DMA)
|
|
return telemetryNoDMAFifo.pop(*byte);
|
|
else
|
|
return telemetryDMAFifo.pop(*byte);
|
|
#else
|
|
return telemetryNoDMAFifo.pop(*byte);
|
|
#endif
|
|
}
|
|
|
|
void telemetryClearFifo()
|
|
{
|
|
#if defined(PCBX12S)
|
|
telemetryDMAFifo.clear();
|
|
#endif
|
|
|
|
telemetryNoDMAFifo.clear();
|
|
}
|
|
|