314 lines
9.9 KiB
C
314 lines
9.9 KiB
C
/*
|
|
* Copyright (C) OpenTX
|
|
*
|
|
* Based on code named
|
|
* th9x - http://code.google.com/p/th9x
|
|
* er9x - http://code.google.com/p/er9x
|
|
* gruvin9x - http://code.google.com/p/gruvin9x
|
|
*
|
|
* License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#ifndef _BOARD_SKY9X_H_
|
|
#define _BOARD_SKY9X_H_
|
|
|
|
#include <stdio.h>
|
|
#include "board.h"
|
|
#include "audio_driver.h"
|
|
|
|
extern uint16_t ResetReason;
|
|
|
|
#define BOOTLOADER_SIZE 0x8000
|
|
#define FIRMWARE_SIZE (256*1024)
|
|
#define FIRMWARE_ADDRESS 0x00400000
|
|
|
|
// Board driver
|
|
void boardInit(void);
|
|
#define boardOff() pwrOff()
|
|
|
|
// Keys
|
|
#if defined(REVA)
|
|
#define KEYS_GPIO_REG_MENU PIOB->PIO_PDSR
|
|
#define KEYS_GPIO_REG_EXIT PIOA->PIO_PDSR
|
|
#define KEYS_GPIO_REG_UP PIOC->PIO_PDSR
|
|
#define KEYS_GPIO_REG_DOWN PIOC->PIO_PDSR
|
|
#define KEYS_GPIO_REG_RIGHT PIOC->PIO_PDSR
|
|
#define KEYS_GPIO_REG_LEFT PIOC->PIO_PDSR
|
|
#define KEYS_GPIO_PIN_MENU 0x00000040
|
|
#define KEYS_GPIO_PIN_EXIT 0x80000000
|
|
#define KEYS_GPIO_PIN_UP 0x00000004
|
|
#define KEYS_GPIO_PIN_DOWN 0x00000008
|
|
#define KEYS_GPIO_PIN_RIGHT 0x00000010
|
|
#define KEYS_GPIO_PIN_LEFT 0x00000020
|
|
#else
|
|
#define KEYS_GPIO_REG_MENU PIOB->PIO_PDSR
|
|
#define KEYS_GPIO_REG_EXIT PIOC->PIO_PDSR
|
|
#define KEYS_GPIO_REG_UP PIOC->PIO_PDSR
|
|
#define KEYS_GPIO_REG_DOWN PIOC->PIO_PDSR
|
|
#define KEYS_GPIO_REG_RIGHT PIOC->PIO_PDSR
|
|
#define KEYS_GPIO_REG_LEFT PIOC->PIO_PDSR
|
|
#define KEYS_GPIO_PIN_MENU 0x00000020
|
|
#define KEYS_GPIO_PIN_EXIT 0x01000000
|
|
#define KEYS_GPIO_PIN_UP 0x00000002
|
|
#define KEYS_GPIO_PIN_DOWN 0x00000020
|
|
#define KEYS_GPIO_PIN_RIGHT 0x00000010
|
|
#define KEYS_GPIO_PIN_LEFT 0x00000008
|
|
#endif
|
|
|
|
#if defined(REVX)
|
|
#define TRIMS_GPIO_REG_LHL PIOB->PIO_PDSR
|
|
#define TRIMS_GPIO_REG_LVD PIOA->PIO_PDSR
|
|
#define TRIMS_GPIO_REG_RVU PIOC->PIO_PDSR
|
|
#define TRIMS_GPIO_REG_RHL PIOA->PIO_PDSR
|
|
#define TRIMS_GPIO_REG_LHR PIOA->PIO_PDSR
|
|
#define TRIMS_GPIO_REG_LVU PIOC->PIO_PDSR
|
|
#define TRIMS_GPIO_REG_RVD PIOA->PIO_PDSR
|
|
#define TRIMS_GPIO_REG_RHR PIOC->PIO_PDSR
|
|
#else
|
|
#define TRIMS_GPIO_REG_LHL PIOA->PIO_PDSR
|
|
#define TRIMS_GPIO_REG_LVD PIOA->PIO_PDSR
|
|
#define TRIMS_GPIO_REG_RVU PIOA->PIO_PDSR
|
|
#define TRIMS_GPIO_REG_RHL PIOA->PIO_PDSR
|
|
#define TRIMS_GPIO_REG_LHR PIOB->PIO_PDSR
|
|
#define TRIMS_GPIO_REG_LVU PIOC->PIO_PDSR
|
|
#define TRIMS_GPIO_REG_RVD PIOC->PIO_PDSR
|
|
#define TRIMS_GPIO_REG_RHR PIOC->PIO_PDSR
|
|
#endif
|
|
|
|
#if defined(REVX)
|
|
#define TRIMS_GPIO_PIN_LHL 0x00000010
|
|
#define TRIMS_GPIO_PIN_LVD 0x01000000
|
|
#define TRIMS_GPIO_PIN_RVU 0x00000400
|
|
#define TRIMS_GPIO_PIN_RHL 0x00000001
|
|
#define TRIMS_GPIO_PIN_LHR 0x00800000
|
|
#define TRIMS_GPIO_PIN_LVU 0x10000000
|
|
#define TRIMS_GPIO_PIN_RVD 0x00000002
|
|
#define TRIMS_GPIO_PIN_RHR 0x00000200
|
|
#elif defined(REVA)
|
|
#define TRIMS_GPIO_PIN_LHL 0x00000080
|
|
#define TRIMS_GPIO_PIN_LVD 0x08000000
|
|
#define TRIMS_GPIO_PIN_RVU 0x40000000
|
|
#define TRIMS_GPIO_PIN_RHL 0x20000000
|
|
#define TRIMS_GPIO_PIN_LHR 0x00000010
|
|
#define TRIMS_GPIO_PIN_LVU 0x10000000
|
|
#define TRIMS_GPIO_PIN_RVD 0x00000400
|
|
#define TRIMS_GPIO_PIN_RHR 0x00000200
|
|
#else
|
|
#define TRIMS_GPIO_PIN_LHL 0x00800000
|
|
#define TRIMS_GPIO_PIN_LVD 0x01000000
|
|
#define TRIMS_GPIO_PIN_RVU 0x00000002
|
|
#define TRIMS_GPIO_PIN_RHL 0x00000001
|
|
#define TRIMS_GPIO_PIN_LHR 0x00000010
|
|
#define TRIMS_GPIO_PIN_LVU 0x10000000
|
|
#define TRIMS_GPIO_PIN_RVD 0x00000400
|
|
#define TRIMS_GPIO_PIN_RHR 0x00000200
|
|
#endif
|
|
|
|
void usbMassStorage();
|
|
|
|
#define PIN_ENABLE 0x001
|
|
#define PIN_PERIPHERAL 0x000
|
|
#define PIN_INPUT 0x002
|
|
#define PIN_OUTPUT 0x000
|
|
#define PIN_PULLUP 0x004
|
|
#define PIN_NO_PULLUP 0x000
|
|
#define PIN_PULLDOWN 0x008
|
|
#define PIN_NO_PULLDOWN 0x000
|
|
#define PIN_PERI_MASK_L 0x010
|
|
#define PIN_PERI_MASK_H 0x020
|
|
#define PIN_PER_A 0x000
|
|
#define PIN_PER_B 0x010
|
|
#define PIN_PER_C 0x020
|
|
#define PIN_PER_D 0x030
|
|
#define PIN_PORT_MASK 0x0C0
|
|
#define PIN_PORTA 0x000
|
|
#define PIN_PORTB 0x040
|
|
#define PIN_PORTC 0x080
|
|
#define PIN_LOW 0x000
|
|
#define PIN_HIGH 0x100
|
|
|
|
// Telemetry port
|
|
#define SECOND_USART USART0
|
|
#define SECOND_ID ID_USART0
|
|
#define SECOND_PINS { PINS_USART0 }
|
|
|
|
void configure_pins( uint32_t pins, uint16_t config );
|
|
uint16_t getCurrent();
|
|
|
|
extern uint8_t temperature ; // Raw temp reading
|
|
extern uint8_t maxTemperature ; // Raw temp reading
|
|
uint8_t getTemperature();
|
|
|
|
#define strcpy_P strcpy
|
|
#define strcat_P strcat
|
|
|
|
#if !defined(REVA)
|
|
extern uint16_t Current_analogue;
|
|
extern uint16_t Current_max;
|
|
extern uint32_t Current_accumulator;
|
|
extern uint32_t Current_used;
|
|
extern uint16_t sessionTimer;
|
|
void calcConsumption();
|
|
#endif
|
|
|
|
// Trainer driver
|
|
#define SLAVE_MODE() (pwrCheck() == e_power_trainer)
|
|
void checkTrainerSettings();
|
|
void init_trainer_capture();
|
|
|
|
// Write Flash driver
|
|
#define FLASH_PAGESIZE 256
|
|
void writeFlash(uint32_t * address, uint32_t * buffer);
|
|
|
|
// Keys driver
|
|
extern uint32_t readKeys();
|
|
extern uint32_t readTrims();
|
|
#define TRIMS_PRESSED() readTrims()
|
|
#define KEYS_PRESSED() readKeys()
|
|
|
|
// Pulses driver
|
|
void init_no_pulses(uint32_t port);
|
|
void disable_no_pulses(uint32_t port);
|
|
void init_ppm(uint32_t port);
|
|
void disable_ppm(uint32_t port);
|
|
void init_pxx(uint32_t port);
|
|
void disable_pxx(uint32_t port);
|
|
void init_dsm2(uint32_t port);
|
|
void disable_dsm2(uint32_t port);
|
|
|
|
// SD driver
|
|
#if defined(SIMU)
|
|
#define sdInit()
|
|
#define sdDone()
|
|
#else
|
|
#define sdPoll10ms()
|
|
void sdMountPoll();
|
|
extern "C" {
|
|
void init_SDcard();
|
|
void sdInit();
|
|
void sdDone();
|
|
uint32_t sd_card_ready();
|
|
uint32_t sdMounted();
|
|
}
|
|
#endif
|
|
|
|
// WDT driver
|
|
#if defined(SIMU)
|
|
#define wdt_disable()
|
|
#define wdt_enable(x)
|
|
#define wdt_reset()
|
|
#else
|
|
#define wdt_disable()
|
|
#define wdt_enable(x) WDT->WDT_MR = 0x3FFF207F
|
|
#define wdt_reset() WDT->WDT_CR = 0xA5000001
|
|
#endif
|
|
|
|
// Backlight driver
|
|
#define setBacklight(xx) (PWM->PWM_CH_NUM[0].PWM_CDTYUPD = xx)
|
|
#define backlightEnable() (PWM->PWM_CH_NUM[0].PWM_CDTY = g_eeGeneral.backlightBright)
|
|
#define backlightDisable() (PWM->PWM_CH_NUM[0].PWM_CDTY = 100)
|
|
#define isBacklightEnable() (PWM->PWM_CH_NUM[0].PWM_CDTY != 100)
|
|
|
|
// ADC driver
|
|
enum Analogs {
|
|
STICK1,
|
|
STICK2,
|
|
STICK3,
|
|
STICK4,
|
|
POT1,
|
|
POT2,
|
|
POT3,
|
|
POT_LAST = POT3,
|
|
TX_VOLTAGE,
|
|
#if !defined(REVA)
|
|
TX_CURRENT,
|
|
#endif
|
|
NUMBER_ANALOG
|
|
};
|
|
void adcInit();
|
|
void adcRead(void);
|
|
uint16_t getAnalogValue(uint8_t index);
|
|
uint16_t getBatteryVoltage(); // returns current battery voltage in 10mV steps
|
|
void setSticksGain(uint8_t gains);
|
|
|
|
// Buzzer driver
|
|
void buzzerSound(uint8_t duration);
|
|
void buzzerHeartbeat();
|
|
#define BUZZER_HEARTBEAT buzzerHeartbeat
|
|
|
|
// i2c driver
|
|
void i2cCheck();
|
|
|
|
// Coproc driver
|
|
void coprocInit();
|
|
void coprocWriteData(uint8_t *data, uint32_t size);
|
|
void coprocReadData(bool onlytemp=false);
|
|
extern int8_t volumeRequired;
|
|
extern uint8_t Coproc_read;
|
|
extern int8_t Coproc_valid;
|
|
extern int8_t Coproc_temp;
|
|
extern int8_t Coproc_maxtemp;
|
|
|
|
// Haptic driver
|
|
void hapticOff(void);
|
|
void hapticOn(uint32_t pwmPercent);
|
|
|
|
// BlueTooth driver
|
|
#if defined(BLUETOOTH)
|
|
void btInit();
|
|
void btTask(void* pdata);
|
|
void btPushByte(uint8_t data);
|
|
#endif
|
|
|
|
// Power driver
|
|
void pwrInit();
|
|
void pwrOff();
|
|
uint32_t pwrCheck();
|
|
uint32_t pwroffPressed();
|
|
#define UNEXPECTED_SHUTDOWN() (g_eeGeneral.unexpectedShutdown)
|
|
|
|
// EEPROM driver
|
|
void eepromInit();
|
|
uint32_t eepromReadStatus();
|
|
extern volatile uint32_t Spi_complete;
|
|
void eepromWriteEnable();
|
|
void eepromBlockErase(uint32_t address);
|
|
void eepromReadArray(uint32_t address, uint8_t * buffer, uint32_t size);
|
|
void eepromByteProgram(uint32_t address, uint8_t * buffer, uint32_t size);
|
|
|
|
// Rotary Encoder driver
|
|
void rotencInit();
|
|
void rotencEnd();
|
|
|
|
#if ROTARY_ENCODERS > 0
|
|
#define REA_DOWN() (!(PIOB->PIO_PDSR & 0x40))
|
|
#else
|
|
#define REA_DOWN() (0)
|
|
#endif
|
|
|
|
// Debug driver
|
|
void debugPutc(const char c);
|
|
|
|
// Telemetry driver
|
|
void telemetryPortInit(uint32_t baudrate, int mode);
|
|
uint32_t telemetryTransmitPending();
|
|
void telemetryTransmitBuffer(uint8_t * buffer, uint32_t size);
|
|
void rxPdcUsart( void (*pChProcess)(uint8_t x) );
|
|
|
|
// Second UART driver
|
|
void serial2TelemetryInit(unsigned int protocol);
|
|
bool telemetrySecondPortReceive(uint8_t & data);
|
|
|
|
extern const uint8_t BootCode[];
|
|
|
|
#endif // _BOARD_SKY9X_H_
|