446 lines
13 KiB
CMake
446 lines
13 KiB
CMake
include(CMakeForceCompiler)
|
|
include(Bitmaps)
|
|
|
|
set(PCB "X9D+" CACHE STRING "Radio type")
|
|
set(TRANSLATIONS "EN" CACHE STRING "Radio language")
|
|
option(HELI "Heli menu" ON)
|
|
option(FLIGHT_MODES "Flight Modes" ON)
|
|
option(CURVES "Curves" ON)
|
|
option(GVARS "Global variables")
|
|
option(GUI "GUI enabled" ON)
|
|
option(SPLASH "Splash enabled" ON)
|
|
set(PPM_UNIT "PERCENT_PREC1" CACHE STRING "PPM display unit (US/PERCENT_PREC1/PERCENT_PREC0)")
|
|
option(PPM_CENTER_ADJUSTABLE "PPM center adjustable" ON)
|
|
option(PPM_LIMITS_SYMETRICAL "PPM limits symetrical" OFF)
|
|
option(OVERRIDE_CHANNEL_FUNCTION "OverrideChannel function available" ON)
|
|
option(DANGEROUS_MODULE_FUNCTIONS "Dangerous module functions (RangeCheck / Bind / Module OFF, etc.) available" OFF)
|
|
option(FAI "Competition mode (no telemetry)" OFF)
|
|
option(AUTOSOURCE "Automatic source detection in menus" ON)
|
|
option(AUTOSWITCH "Automatic switch detection in menus" ON)
|
|
option(JITTER_MEASURE "Enable ADC jitter measurement" OFF)
|
|
option(WATCHDOG_DISABLED "Disable hardware Watchdog" OFF)
|
|
option(SIMU_AUDIO "Enable simulator audio" OFF)
|
|
option(SIMU_DISKIO "Enable disk IO simulation in simulator. Simulator will use FatFs module and simulated IO layer that uses \"./sdcard.image\" file as image of SD card. This file must contain whole SD card from first to last sector" OFF)
|
|
option(FAS_PROTOTYPE "Support of old FAS prototypes (different resistors)" OFF)
|
|
option(TEMPLATES "Model templates menu" OFF)
|
|
|
|
enable_language(ASM)
|
|
set(OPT s)
|
|
|
|
set(THIRDPARTY_DIR thirdparty)
|
|
set(LUA_DIR ${THIRDPARTY_DIR}/Lua/src)
|
|
set(COOS_DIR ${THIRDPARTY_DIR}/CoOS)
|
|
set(FATFS_DIR ${THIRDPARTY_DIR}/FatFs)
|
|
set(RADIO_BIN_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR})
|
|
|
|
set(GUI_LANGUAGES cz de en es fr it pt sk se pl hu nl)
|
|
set(TTS_LANGUAGES cz de en es fr it pt sk se pl hu nl)
|
|
|
|
configure_file(stamp.h.in stamp.h @ONLY)
|
|
|
|
add_subdirectory(translations)
|
|
add_subdirectory(bitmaps)
|
|
add_subdirectory(fonts)
|
|
|
|
set(EEPROM_VARIANT 0)
|
|
set(GVARS_VARIANT 1)
|
|
set(FRSKY_VARIANT 2)
|
|
set(3POS_VARIANT 4)
|
|
set(MAVLINK_VARIANT 8)
|
|
set(M2561_VARIANT 16384)
|
|
set(M128_VARIANT 32768)
|
|
|
|
set(FIRMWARE_DEPENDENCIES firmware_translations)
|
|
|
|
set(FATFS_SRC
|
|
${FATFS_DIR}/ff.c
|
|
${FATFS_DIR}/fattime.c
|
|
${FATFS_DIR}/option/ccsbcs.c
|
|
)
|
|
|
|
if(PCB STREQUAL HORUS)
|
|
include(targets/horus/CMakeLists.txt)
|
|
elseif(PCB STREQUAL X9E OR PCB STREQUAL X9D+ OR PCB STREQUAL X9D OR PCB STREQUAL X7D)
|
|
include(targets/taranis/CMakeLists.txt)
|
|
elseif(PCB STREQUAL SKY9X OR PCB STREQUAL 9XRPRO OR PCB STREQUAL AR9X)
|
|
include(targets/sky9x/CMakeLists.txt)
|
|
elseif(PCB STREQUAL 9X OR PCB STREQUAL 9XR OR PCB STREQUAL 9X128 OR PCB STREQUAL 9XR128)
|
|
include(targets/9x/CMakeLists.txt)
|
|
elseif(PCB STREQUAL 9X2561)
|
|
set(ARCH AVR)
|
|
set(MCU atmega2561)
|
|
string(TOLOWER ${PCB} FLAVOUR)
|
|
set(EEPROM EEPROM_RLC)
|
|
add_definitions(-DEEPROM_VARIANT=${M2561_VARIANT})
|
|
set(GUI_DIR 128x64)
|
|
set(TARGET_DIR 9x)
|
|
set(FIRMWARE_DEPENDENCIES ${FIRMWARE_DEPENDENCIES} 9x_bitmaps)
|
|
add_definitions(-DPCBSTD -DPCB${PCB} -DCPUM2561)
|
|
set(TARGET_SRC ${TARGET_SRC} board.cpp)
|
|
set(GUI_SRC
|
|
${GUI_SRC}
|
|
model_inputs_mixes.cpp
|
|
radio_diagkeys.cpp
|
|
radio_diaganas.cpp)
|
|
if(SP22)
|
|
add_definitions(-DSP22)
|
|
endif()
|
|
if(PWM_BACKLIGHT)
|
|
add_definitions(-DPWM_BACKLIGHT)
|
|
endif()
|
|
set(FIRMWARE_TARGET_SRC ${FIRMWARE_TARGET_SRC} lcd_driver.cpp)
|
|
elseif(PCB STREQUAL GRUVIN9X)
|
|
include(targets/gruvin9x/CMakeLists.txt)
|
|
elseif(PCB STREQUAL MEGA2560)
|
|
include(targets/mega2560/CMakeLists.txt)
|
|
else()
|
|
message(FATAL_ERROR "Unknown PCB '${PCB}'")
|
|
endif()
|
|
|
|
if(NOT PCB STREQUAL 9XR AND NOT PCB STREQUAL 9XRPRO)
|
|
option(DBLKEYS "Double Keys" ON)
|
|
if(DBLKEYS)
|
|
add_definitions(-DDBLKEYS)
|
|
endif()
|
|
endif()
|
|
|
|
if(CPU_TYPE STREQUAL STM32F4)
|
|
include(targets/common/arm/stm32/f4/CMakeLists.txt)
|
|
endif()
|
|
|
|
if(CPU_TYPE STREQUAL STM32F2)
|
|
include(targets/common/arm/stm32/f2/CMakeLists.txt)
|
|
endif()
|
|
|
|
if(CPU_FAMILY STREQUAL STM32)
|
|
include(targets/common/arm/stm32/CMakeLists.txt)
|
|
endif()
|
|
|
|
if(ARCH STREQUAL ARM)
|
|
include(targets/common/arm/CMakeLists.txt)
|
|
else()
|
|
include(targets/common/avr/CMakeLists.txt)
|
|
endif()
|
|
|
|
include_directories(targets/${TARGET_DIR} ${THIRDPARTY_DIR})
|
|
|
|
foreach(LANGUAGE ${GUI_LANGUAGES})
|
|
string(TOUPPER ${LANGUAGE} LANGUAGE_CAPITALIZED)
|
|
if(TRANSLATIONS STREQUAL ${LANGUAGE_CAPITALIZED})
|
|
add_definitions(-DTRANSLATIONS_${LANGUAGE_CAPITALIZED} -DTRANSLATIONS="${LANGUAGE_CAPITALIZED}")
|
|
endif()
|
|
endforeach()
|
|
|
|
set(SRC ${SRC} debug.cpp)
|
|
|
|
if(${EEPROM} STREQUAL SDCARD)
|
|
set(SRC ${SRC} storage/storage_common.cpp storage/sdcard_raw.cpp)
|
|
elseif(${EEPROM} STREQUAL EEPROM_RLC)
|
|
set(SRC ${SRC} storage/storage_common.cpp storage/eeprom_common.cpp storage/eeprom_rlc.cpp)
|
|
add_definitions(-DEEPROM -DEEPROM_RLC)
|
|
else()
|
|
set(SRC ${SRC} storage/storage_common.cpp storage/eeprom_common.cpp storage/eeprom_raw.cpp)
|
|
add_definitions(-DEEPROM -DEEPROM_RAW)
|
|
endif()
|
|
|
|
if(ARCH STREQUAL ARM AND NOT PCB STREQUAL HORUS AND NOT PCB STREQUAL FLAMENCO)
|
|
set(SRC ${SRC} storage/eeprom_conversions.cpp)
|
|
endif()
|
|
|
|
add_definitions(-DFLAVOUR="${FLAVOUR}")
|
|
|
|
include_directories(${CMAKE_CURRENT_SOURCE_DIR})
|
|
include_directories(${CMAKE_CURRENT_BINARY_DIR})
|
|
include_directories(${CMAKE_CURRENT_BINARY_DIR}/bitmaps/${GUI_DIR})
|
|
|
|
add_subdirectory(lua)
|
|
include(gui/CMakeLists.txt)
|
|
|
|
if(RAMBACKUP)
|
|
add_definitions(-DRAMBACKUP)
|
|
set(SRC ${SRC} storage/rambackup.cpp storage/rlc.cpp)
|
|
endif()
|
|
|
|
if(TEMPLATES)
|
|
add_definitions(-DTEMPLATES)
|
|
set(SRC ${SRC} templates.cpp)
|
|
set(GUI_SRC ${GUI_SRC} model_templates.cpp)
|
|
endif()
|
|
|
|
if(NOT LUA STREQUAL NO)
|
|
add_definitions(-DLUA)
|
|
include_directories(${LUA_DIR})
|
|
set(FIRMWARE_DEPENDENCIES ${FIRMWARE_DEPENDENCIES} ${LUA_EXPORT})
|
|
if(LUA STREQUAL YES)
|
|
add_definitions(-DLUA_MODEL_SCRIPTS)
|
|
set(GUI_SRC ${GUI_SRC} model_custom_scripts.cpp)
|
|
endif()
|
|
set(SRC ${SRC} lua/interface.cpp lua/api_general.cpp lua/api_lcd.cpp lua/api_model.cpp)
|
|
set(LUA_SRC lapi.c lcode.c lctype.c ldebug.c ldo.c ldump.c lfunc.c lgc.c llex.c lmem.c lobject.c lopcodes.c lparser.c
|
|
lstate.c lstring.c ltable.c lrotable.c ltm.c lundump.c lvm.c lzio.c linit.c
|
|
lbaselib.c lmathlib.c lbitlib.c loadlib.c lauxlib.c ltablib.c lcorolib.c liolib.c lstrlib.c
|
|
)
|
|
foreach(FILE ${LUA_SRC})
|
|
set(SRC ${SRC} ${LUA_DIR}/${FILE})
|
|
endforeach()
|
|
endif()
|
|
|
|
if(HELI)
|
|
add_definitions(-DHELI)
|
|
endif()
|
|
|
|
if(FLIGHT_MODES)
|
|
add_definitions(-DFLIGHT_MODES)
|
|
set(GUI_SRC ${GUI_SRC} model_flightmodes.cpp)
|
|
endif()
|
|
|
|
if(CURVES)
|
|
add_definitions(-DCURVES)
|
|
endif()
|
|
|
|
if(GVARS)
|
|
add_definitions(-DGVARS)
|
|
math(EXPR EEPROM_VARIANT ${EEPROM_VARIANT}+${GVARS_VARIANT})
|
|
endif()
|
|
|
|
if(FAI STREQUAL YES)
|
|
add_definitions(-DFAI)
|
|
elseif(FAI STREQUAL CHOICE)
|
|
add_definitions(-DFAI_CHOICE)
|
|
endif()
|
|
|
|
if(FAS_PROTOTYPE)
|
|
add_definitions(-DFAS_PROTOTYPE)
|
|
endif()
|
|
|
|
if(AUTOSOURCE)
|
|
add_definitions(-DAUTOSOURCE)
|
|
endif()
|
|
|
|
if(AUTOSWITCH)
|
|
add_definitions(-DAUTOSWITCH)
|
|
endif()
|
|
|
|
if(JITTER_MEASURE)
|
|
add_definitions(-DJITTER_MEASURE)
|
|
endif()
|
|
|
|
if(WATCHDOG_DISABLED)
|
|
add_definitions(-DWATCHDOG_DISABLED)
|
|
endif()
|
|
|
|
if(SIMU_AUDIO)
|
|
add_definitions(-DSIMU_AUDIO)
|
|
endif()
|
|
|
|
if(SDCARD)
|
|
add_definitions(-DSDCARD)
|
|
include_directories(${FATFS_DIR} ${FATFS_DIR}/option)
|
|
set(SRC ${SRC} sdcard.cpp rtc.cpp logs.cpp)
|
|
set(GUI_SRC ${GUI_SRC} radio_sdmanager.cpp)
|
|
set(FIRMWARE_SRC ${FIRMWARE_SRC} ${FATFS_SRC})
|
|
endif()
|
|
|
|
if(SHUTDOWN_CONFIRMATION)
|
|
add_definitions(-DSHUTDOWN_CONFIRMATION)
|
|
endif()
|
|
|
|
if(PPM_UNIT STREQUAL US)
|
|
add_definitions(-DPPM_UNIT_US)
|
|
elseif(PPM_UNIT STREQUAL PERCENT_PREC1)
|
|
add_definitions(-DPPM_UNIT_PERCENT_PREC1)
|
|
else()
|
|
add_definitions(-DPPM_UNIT_PERCENT_PREC0)
|
|
endif()
|
|
|
|
if(PPM_CENTER_ADJUSTABLE)
|
|
add_definitions(-DPPM_CENTER_ADJUSTABLE)
|
|
endif()
|
|
|
|
if(PPM_LIMITS_SYMETRICAL)
|
|
add_definitions(-DPPM_LIMITS_SYMETRICAL)
|
|
endif()
|
|
|
|
if(OVERRIDE_CHANNEL_FUNCTION)
|
|
add_definitions(-DOVERRIDE_CHANNEL_FUNCTION)
|
|
endif()
|
|
|
|
if(DANGEROUS_MODULE_FUNCTIONS)
|
|
add_definitions(-DDANGEROUS_MODULE_FUNCTIONS)
|
|
endif()
|
|
|
|
if(SPLASH)
|
|
add_definitions(-DSPLASH)
|
|
endif()
|
|
|
|
set(SRC
|
|
${SRC}
|
|
opentx.cpp
|
|
functions.cpp
|
|
strhelpers.cpp
|
|
switches.cpp
|
|
mixer.cpp
|
|
stamp.cpp
|
|
timers.cpp
|
|
trainer_input.cpp
|
|
)
|
|
|
|
if(CURVES)
|
|
set(SRC
|
|
${SRC}
|
|
curves.cpp
|
|
)
|
|
endif()
|
|
|
|
if(GUI)
|
|
add_definitions(-DGUI)
|
|
set(SRC
|
|
${SRC}
|
|
keys.cpp
|
|
maths.cpp
|
|
translations.cpp
|
|
gui/gui_common_arm.cpp
|
|
)
|
|
foreach(FILE ${GUI_SRC})
|
|
set(SRC ${SRC} gui/${GUI_DIR}/${FILE})
|
|
endforeach()
|
|
endif()
|
|
|
|
foreach(FILE ${TARGET_SRC})
|
|
set(SRC targets/${TARGET_DIR}/${FILE} ${SRC})
|
|
endforeach()
|
|
|
|
foreach(FILE ${FIRMWARE_TARGET_SRC})
|
|
set(FIRMWARE_SRC ${FIRMWARE_SRC} targets/${TARGET_DIR}/${FILE})
|
|
endforeach()
|
|
|
|
foreach(FILE ${PULSES_SRC})
|
|
set(SRC ${SRC} pulses/${FILE})
|
|
endforeach()
|
|
|
|
add_definitions(-DCORRECT_NEGATIVE_SHIFTS)
|
|
|
|
if(NOT WIN32)
|
|
add_definitions(-Wall -Wno-strict-aliasing -Wformat -Wreturn-type -Wunused -Wuninitialized -Wunknown-pragmas -Wno-switch -Wtype-limits)
|
|
else()
|
|
add_definitions(-DHAVE_STRUCT_TIMESPEC)
|
|
endif()
|
|
|
|
add_subdirectory(targets/simu)
|
|
if(NOT WIN32)
|
|
add_subdirectory(tests)
|
|
endif()
|
|
|
|
set(SRC ${SRC} ${FIRMWARE_SRC})
|
|
|
|
# trick to remove the -rdynamic and --out-implib issues
|
|
set(CMAKE_EXECUTABLE_SUFFIX ".elf")
|
|
set(CMAKE_SHARED_LIBRARY_LINK_C_FLAGS "")
|
|
set(CMAKE_SHARED_LIBRARY_LINK_CXX_FLAGS "")
|
|
set(CMAKE_COMMON_FLAGS "")
|
|
set(CMAKE_EXE_LINKER_FLAGS "")
|
|
set(CMAKE_C_LINK_EXECUTABLE "<CMAKE_C_COMPILER> <FLAGS> <CMAKE_C_LINK_FLAGS> <LINK_FLAGS> <OBJECTS> -o <TARGET>")
|
|
set(CMAKE_CXX_LINK_EXECUTABLE "<CMAKE_CXX_COMPILER> <FLAGS> <CMAKE_CXX_LINK_FLAGS> <LINK_FLAGS> <OBJECTS> -o <TARGET>")
|
|
|
|
if(NOT MSVC)
|
|
if(ARCH STREQUAL ARM)
|
|
cmake_force_c_compiler(arm-none-eabi-gcc GNU)
|
|
cmake_force_cxx_compiler(arm-none-eabi-g++ GNU)
|
|
set(CMAKE_ASM_COMPILER arm-none-eabi-as)
|
|
|
|
set(CMAKE_SYSTEM_NAME Generic)
|
|
set(CMAKE_SYSTEM_VERSION 1)
|
|
set(CMAKE_ASM_COMPILE_OBJECT "<CMAKE_ASM_COMPILER> -o <OBJECT> <SOURCE>")
|
|
|
|
set(COMMON_FLAGS "-mcpu=${MCU} -mthumb -fomit-frame-pointer -fverbose-asm -Wa,-ahlms=firmware.lst -O${OPT} -gdwarf-2 -DHSE_VALUE=${HSE_VALUE} -fno-exceptions -fdata-sections -ffunction-sections ${WARNING_FLAGS}")
|
|
# Remove once the minimum cmake version is set to 3.1 in the main CmakeLists.tx
|
|
if (${CMAKE_VERSION} VERSION_LESS 3.1.0})
|
|
set(COMMON_CPP_FLAGS "${COMMON_FLAGS} -std=gnu++11")
|
|
else()
|
|
set(COMMON_CPP_FLAGS ${COMMON_FLAGS})
|
|
endif()
|
|
set(CMAKE_C_FLAGS "${COMMON_FLAGS} -Wimplicit")
|
|
set(CMAKE_C_FLAGS_RELWITHDEBINFO "${COMMON_FLAGS} -Wimplicit -g")
|
|
set(CMAKE_C_FLAGS_RELEASE "${COMMON_FLAGS} -Wimplicit")
|
|
set(CMAKE_C_FLAGS_DEBUG "${COMMON_FLAGS} -Wimplicit -g")
|
|
set(CMAKE_CXX_FLAGS "${COMMON_CPP_FLAGS}")
|
|
set(CMAKE_CXX_FLAGS_RELWITHDEBINFO "${COMMON_CPP_FLAGS} -g")
|
|
set(CMAKE_CXX_FLAGS_RELEASE "${COMMON_CPP_FLAGS}")
|
|
set(CMAKE_CXX_FLAGS_DEBUG "${COMMON_CPP_FLAGS} -g")
|
|
set(CMAKE_EXE_LINKER_FLAGS "-mcpu=${MCU} -mthumb -lm -T${RADIO_SRC_DIRECTORY}/${LINKER_SCRIPT} -Wl,-Map=firmware.map,--cref,--no-warn-mismatch,--gc-sections")
|
|
|
|
if(PCB STREQUAL X9D OR PCB STREQUAL X9D+ OR PCB STREQUAL X9E OR PCB STREQUAL X7D)
|
|
add_subdirectory(targets/${TARGET_DIR}/bootloader)
|
|
include_directories(${CMAKE_CURRENT_BINARY_DIR}/targets/${TARGET_DIR}/bootloader)
|
|
set(FIRMWARE_DEPENDENCIES ${FIRMWARE_DEPENDENCIES} bootloader)
|
|
else()
|
|
# We fetch Mike's bootloader as it is not included inside OpenTX
|
|
file(DOWNLOAD https://github.com/MikeBland/OpenRcBootloader/releases/download/V1.9/${BOOTLOADER} ${CMAKE_CURRENT_BINARY_DIR}/bootloader.lbm)
|
|
endif()
|
|
|
|
add_executable(firmware ${SRC} ${FIRMWARE_HEADERS})
|
|
link_libraries(firmware -lstdc++)
|
|
add_dependencies(firmware ${FIRMWARE_DEPENDENCIES})
|
|
|
|
add_custom_command(
|
|
TARGET firmware POST_BUILD
|
|
COMMAND arm-none-eabi-objcopy -O binary firmware.elf firmware.bin
|
|
WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
|
|
)
|
|
else()
|
|
cmake_force_c_compiler(avr-gcc GNU)
|
|
cmake_force_cxx_compiler(avr-gcc GNU)
|
|
|
|
set(CMAKE_CXX_FLAGS "-mmcu=${MCU} -DF_CPU=16000000UL -O${OPT} -gdwarf-2 -fno-exceptions -flto -fwhole-program -fno-inline-small-functions -mstrict-X ${WARNING_FLAGS}")
|
|
# Remove once the minimum cmake version is set to 3.1 in the main CmakeLists.tx
|
|
if (${CMAKE_VERSION} VERSION_LESS 3.1.0})
|
|
set(CMAKE_CXX_FLAGS "-std=gnu++11 ${CMAKE_CXX_FLAGS}")
|
|
endif()
|
|
|
|
include_directories(storage gui/${GUI_DIR})
|
|
|
|
set(ALLSRC ${PROJECT_BINARY_DIR}/allsrc.cpp)
|
|
foreach(FILE ${SRC})
|
|
file(READ ${FILE} FILE_CONTENT)
|
|
set(ALLSRC_CONTENT "${ALLSRC_CONTENT}# 1 \"${FILE}\"\n${FILE_CONTENT}")
|
|
endforeach()
|
|
|
|
file(WRITE ${ALLSRC} "${ALLSRC_CONTENT}")
|
|
|
|
add_executable(firmware ${ALLSRC})
|
|
add_dependencies(firmware ${FIRMWARE_DEPENDENCIES})
|
|
|
|
add_custom_command(
|
|
TARGET firmware POST_BUILD
|
|
COMMAND avr-objcopy -O ihex -R .eeprom firmware.elf firmware.hex
|
|
WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
|
|
)
|
|
|
|
add_custom_target(firmware.lss
|
|
COMMAND avr-objdump -h -S firmware.elf > firmware.lss
|
|
DEPENDS firmware
|
|
WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
|
|
)
|
|
|
|
add_custom_target(firmware-size
|
|
COMMAND avr-size --format=avr --mcu=${MCU} firmware.elf
|
|
DEPENDS firmware
|
|
WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
|
|
)
|
|
endif()
|
|
|
|
if(CPU_FAMILY STREQUAL STM32)
|
|
add_custom_target(flash
|
|
COMMAND dfu-util --alt 0 --dfuse-address 0x08000000:leave -d 0483:df11 -D firmware.bin
|
|
DEPENDS firmware
|
|
WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
|
|
)
|
|
|
|
add_custom_target(jtag-flash
|
|
COMMAND st-flash --reset write firmware.bin 0x8000000
|
|
DEPENDS firmware
|
|
WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
|
|
)
|
|
endif()
|
|
endif()
|